summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-03-13net/mlx5: Bridge, fix the crash caused by LAG state checkJianbo Liu
When removing LAG device from bridge, NETDEV_CHANGEUPPER event is triggered. Driver finds the lower devices (PFs) to flush all the offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns false if one of PF is unloaded. In such case, mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of the alive PF, and the flush is skipped. Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be ignored in this case because the upper interface for bond is deleted, and the entry will never be aged because lastuse is never updated. To make things worse, as the entry is alive, mlx5 bridge workqueue keeps sending that event, which is then handled by kernel bridge notifier. It causes the following crash when accessing the passed bond netdev which is already destroyed. To fix this issue, remove such checks. LAG state is already checked in commit 15f8f168952f ("net/mlx5: Bridge, verify LAG state when adding bond to bridge"), driver still need to skip offload if LAG becomes invalid state after initialization. Oops: stack segment: 0000 [#1] SMP CPU: 3 UID: 0 PID: 23695 Comm: kworker/u40:3 Tainted: G OE 6.11.0_mlnx #1 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_bridge_wq mlx5_esw_bridge_update_work [mlx5_core] RIP: 0010:br_switchdev_event+0x2c/0x110 [bridge] Code: 44 00 00 48 8b 02 48 f7 00 00 02 00 00 74 69 41 54 55 53 48 83 ec 08 48 8b a8 08 01 00 00 48 85 ed 74 4a 48 83 fe 02 48 89 d3 <4c> 8b 65 00 74 23 76 49 48 83 fe 05 74 7e 48 83 fe 06 75 2f 0f b7 RSP: 0018:ffffc900092cfda0 EFLAGS: 00010297 RAX: ffff888123bfe000 RBX: ffffc900092cfe08 RCX: 00000000ffffffff RDX: ffffc900092cfe08 RSI: 0000000000000001 RDI: ffffffffa0c585f0 RBP: 6669746f6e690a30 R08: 0000000000000000 R09: ffff888123ae92c8 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888123ae9c60 R13: 0000000000000001 R14: ffffc900092cfe08 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f15914c8734 CR3: 0000000002830005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? die+0x38/0x60 ? do_trap+0x10b/0x120 ? do_error_trap+0x64/0xa0 ? exc_stack_segment+0x33/0x50 ? asm_exc_stack_segment+0x22/0x30 ? br_switchdev_event+0x2c/0x110 [bridge] ? sched_balance_newidle.isra.149+0x248/0x390 notifier_call_chain+0x4b/0xa0 atomic_notifier_call_chain+0x16/0x20 mlx5_esw_bridge_update+0xec/0x170 [mlx5_core] mlx5_esw_bridge_update_work+0x19/0x40 [mlx5_core] process_scheduled_works+0x81/0x390 worker_thread+0x106/0x250 ? bh_worker+0x110/0x110 kthread+0xb7/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1741644104-97767-6-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13net/mlx5: Lag, Check shared fdb before creating MultiPort E-SwitchShay Drory
Currently, MultiPort E-Switch is requesting to create a LAG with shared FDB without checking the LAG is supporting shared FDB. Add the check. Fixes: a32327a3a02c ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1741644104-97767-5-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13net/mlx5: Fix incorrect IRQ pool usage when releasing IRQsShay Drory
mlx5_irq_pool_get() is a getter for completion IRQ pool only. However, after the cited commit, mlx5_irq_pool_get() is called during ctrl IRQ release flow to retrieve the pool, resulting in the use of an incorrect IRQ pool. Hence, use the newly introduced mlx5_irq_get_pool() getter to retrieve the correct IRQ pool based on the IRQ itself. While at it, rename mlx5_irq_pool_get() to mlx5_irq_table_get_comp_irq_pool() which accurately reflects its purpose and improves code readability. Fixes: 0477d5168bbb ("net/mlx5: Expose SFs IRQs") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1741644104-97767-4-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13net/mlx5: HWS, Rightsize bwc matcher priorityVlad Dogaru
The bwc layer was clamping the matcher priority from 32 bits to 16 bits. This didn't show up until a matcher was resized, since the initial native matcher was created using the correct 32 bit value. The fix also reorders fields to avoid some padding. Fixes: 2111bb970c78 ("net/mlx5: HWS, added backward-compatible API handling") Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1741644104-97767-3-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13net/mlx5: DR, use the right action structs for STEv3Yevgeny Kliteynik
Some actions in ConnectX-8 (STEv3) have different structure, and they are handled separately in ste_ctx_v3. This separate handling was missing two actions: INSERT_HDR and REMOVE_HDR, which broke SWS for Linux Bridge. This patch resolves the issue by introducing dedicated callbacks for the insert and remove header functions, with version-specific implementations for each STE variant. Fixes: 4d617b57574f ("net/mlx5: DR, add support for ConnectX-8 steering") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Itamar Gozlan <igozlan@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1741644104-97767-2-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-12Merge tag 'wireless-2025-03-12' of ↵David S. Miller
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes berg says: ==================== Few more fixes: - cfg80211/mac80211 - stop possible runaway wiphy worker - EHT should not use reserved MPDU size bits - don't run worker for stopped interfaces - fix SA Query processing with MLO - fix lookup of assoc link BSS entries - correct station flush on unauthorize - iwlwifi: - TSO fixes - fix non-MSI-X platforms - stop possible runaway restart worker - rejigger maintainers so I'm not CC'ed on everything ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-11qlcnic: fix memory leak issues in qlcnic_sriov_common.cHaoxiang Li
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if any sriov_vlans fails to be allocated. Add qlcnic_sriov_free_vlans() to free the memory allocated by qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to be allocated. Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11rtase: Fix improper release of ring list entries in rtase_sw_resetJustin Lai
Since rtase_init_ring, which is called within rtase_sw_reset, adds ring entries already present in the ring list back into the list, it causes the ring list to form a cycle. This results in list_for_each_entry_safe failing to find an endpoint during traversal, leading to an error. Therefore, it is necessary to remove the previously added ring_list nodes before calling rtase_init_ring. Fixes: 079600489960 ("rtase: Implement net_device_ops") Signed-off-by: Justin Lai <justinlai0215@realtek.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306070510.18129-1-justinlai0215@realtek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11bonding: fix incorrect MAC address setting to receive NS messagesHangbin Liu
When validation on the backup slave is enabled, we need to validate the Neighbor Solicitation (NS) messages received on the backup slave. To receive these messages, the correct destination MAC address must be added to the slave. However, the target in bonding is a unicast address, which we cannot use directly. Instead, we should first convert it to a Solicited-Node Multicast Address and then derive the corresponding MAC address. Fix the incorrect MAC address setting on both slave_set_ns_maddr() and slave_set_ns_maddrs(). Since the two function names are similar. Add some description for the functions. Also only use one mac_addr variable in slave_set_ns_maddr() to save some code and logic. Fixes: 8eb36164d1a6 ("bonding: add ns target multicast address to slave device") Acked-by: Jay Vosburgh <jv@jvosburgh.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306023923.38777-2-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-10eth: bnxt: fix memory leak in queue resetTaehee Yoo
When the queue is reset, the bnxt_alloc_one_tpa_info() is called to allocate tpa_info for the new queue. And then the old queue's tpa_info should be removed by the bnxt_free_one_tpa_info(), but it is not called. So memory leak occurs. It adds the bnxt_free_one_tpa_info() in the bnxt_queue_mem_free(). unreferenced object 0xffff888293cc0000 (size 16384): comm "ncdevmem", pid 2076, jiffies 4296604081 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 40 75 78 93 82 88 ff ff ........@ux..... 40 75 78 93 02 00 00 00 00 00 00 00 00 00 00 00 @ux............. backtrace (crc 5d7d4798): ___kmalloc_large_node+0x10d/0x1b0 __kmalloc_large_node_noprof+0x17/0x60 __kmalloc_noprof+0x3f6/0x520 bnxt_alloc_one_tpa_info+0x5f/0x300 [bnxt_en] bnxt_queue_mem_alloc+0x8e8/0x14f0 [bnxt_en] netdev_rx_queue_restart+0x233/0x620 net_devmem_bind_dmabuf_to_queue+0x2a3/0x600 netdev_nl_bind_rx_doit+0xc00/0x10a0 genl_family_rcv_msg_doit+0x1d4/0x2b0 genl_rcv_msg+0x3fb/0x6c0 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x447/0x710 netlink_sendmsg+0x712/0xbc0 __sys_sendto+0x3fd/0x4d0 __x64_sys_sendto+0xdc/0x1b0 Fixes: 2d694c27d32e ("bnxt_en: implement netdev_queue_mgmt_ops") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-7-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}Taehee Yoo
When qstats-get operation is executed, callbacks of netdev_stats_ops are called. The bnxt_get_queue_stats{rx | tx} collect per-queue stats from sw_stats in the rings. But {rx | tx | cp}_ring are allocated when the interface is up. So, these rings are not allocated when the interface is down. The qstats-get is allowed even if the interface is down. However, the bnxt_get_queue_stats{rx | tx}() accesses cp_ring and tx_ring without null check. So, it needs to avoid accessing rings if the interface is down. Reproducer: ip link set $interface down ./cli.py --spec netdev.yaml --dump qstats-get OR ip link set $interface down python ./stats.py Splat looks like: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1680fa067 P4D 1680fa067 PUD 16be3b067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 1495 Comm: python3 Not tainted 6.14.0-rc4+ #32 5cd0f999d5a15c574ac72b3e4b907341 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en] Code: c6 87 b5 18 00 00 02 eb a2 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 01 RSP: 0018:ffffabef43cdb7e0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffc04c8710 RCX: 0000000000000000 RDX: ffffabef43cdb858 RSI: 0000000000000000 RDI: ffff8d504e850000 RBP: ffff8d506c9f9c00 R08: 0000000000000004 R09: ffff8d506bcd901c R10: 0000000000000015 R11: ffff8d506bcd9000 R12: 0000000000000000 R13: ffffabef43cdb8c0 R14: ffff8d504e850000 R15: 0000000000000000 FS: 00007f2c5462b080(0000) GS:ffff8d575f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000167fd0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? sched_balance_find_src_group+0x58d/0xd10 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en cdd546fd48563c280cfd30e9647efa420db07bf1] netdev_nl_stats_by_netdev+0x2b1/0x4e0 ? xas_load+0x9/0xb0 ? xas_find+0x183/0x1d0 ? xa_find+0x8b/0xe0 netdev_nl_qstats_get_dumpit+0xbf/0x1e0 genl_dumpit+0x31/0x90 netlink_dump+0x1a8/0x360 Fixes: af7b3b4adda5 ("eth: bnxt: support per-queue statistics") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250309134219.91670-6-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: do not update checksum in bnxt_xdp_build_skb()Taehee Yoo
The bnxt_rx_pkt() updates ip_summed value at the end if checksum offload is enabled. When the XDP-MB program is attached and it returns XDP_PASS, the bnxt_xdp_build_skb() is called to update skb_shared_info. The main purpose of bnxt_xdp_build_skb() is to update skb_shared_info, but it updates ip_summed value too if checksum offload is enabled. This is actually duplicate work. When the bnxt_rx_pkt() updates ip_summed value, it checks if ip_summed is CHECKSUM_NONE or not. It means that ip_summed should be CHECKSUM_NONE at this moment. But ip_summed may already be updated to CHECKSUM_UNNECESSARY in the XDP-MB-PASS path. So the by skb_checksum_none_assert() WARNS about it. This is duplicate work and updating ip_summed in the bnxt_xdp_build_skb() is not needed. Splat looks like: WARNING: CPU: 3 PID: 5782 at ./include/linux/skbuff.h:5155 bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Modules linked in: bnxt_re bnxt_en rdma_ucm rdma_cm iw_cm ib_cm ib_uverbs veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_] CPU: 3 UID: 0 PID: 5782 Comm: socat Tainted: G W 6.14.0-rc4+ #27 Tainted: [W]=WARN Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Code: 54 24 0c 4c 89 f1 4c 89 ff c1 ea 1f ff d3 0f 1f 00 49 89 c6 48 85 c0 0f 84 4c e5 ff ff 48 89 c7 e8 ca 3d a0 c8 e9 8f f4 ff ff <0f> 0b f RSP: 0018:ffff88881ba09928 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000c7590303 RCX: 0000000000000000 RDX: 1ffff1104e7d1610 RSI: 0000000000000001 RDI: ffff8881c91300b8 RBP: ffff88881ba09b28 R08: ffff888273e8b0d0 R09: ffff888273e8b070 R10: ffff888273e8b010 R11: ffff888278b0f000 R12: ffff888273e8b080 R13: ffff8881c9130e00 R14: ffff8881505d3800 R15: ffff888273e8b000 FS: 00007f5a2e7be080(0000) GS:ffff88881ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff2e708ff8 CR3: 000000013e3b0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0xcd/0x2f0 ? bnxt_rx_pkt+0x479b/0x7610 ? report_bug+0x326/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x14/0x50 ? asm_exc_invalid_op+0x16/0x20 ? bnxt_rx_pkt+0x479b/0x7610 ? bnxt_rx_pkt+0x3e41/0x7610 ? __pfx_bnxt_rx_pkt+0x10/0x10 ? napi_complete_done+0x2cf/0x7d0 __bnxt_poll_work+0x4e8/0x1220 ? __pfx___bnxt_poll_work+0x10/0x10 ? __pfx_mark_lock.part.0+0x10/0x10 bnxt_poll_p5+0x36a/0xfa0 ? __pfx_bnxt_poll_p5+0x10/0x10 __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x899/0xd00 ... Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250309134219.91670-5-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logicTaehee Yoo
When a queue is restarted, it sets MRU to 0 for stopping packet flow. MRU variable is a member of vnic_info[], the first vnic_info is default and the second is ntuple. Only when ntuple is enabled(ethtool -K eth0 ntuple on), vnic_info for ntuple is allocated in init logic. The bp->nr_vnics indicates how many vnic_info are allocated. However bnxt_queue_{start | stop}() accesses vnic_info[BNXT_VNIC_NTUPLE] regardless of ntuple state. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: b9d2956e869c ("bnxt_en: stop packet flow during bnxt_queue_stop/start") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-4-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: return fail if interface is down in bnxt_queue_mem_alloc()Taehee Yoo
The bnxt_queue_mem_alloc() is called to allocate new queue memory when a queue is restarted. It internally accesses rx buffer descriptor corresponding to the index. The rx buffer descriptor is allocated and set when the interface is up and it's freed when the interface is down. So, if queue is restarted if interface is down, kernel panic occurs. Splat looks like: BUG: unable to handle page fault for address: 000000000000b240 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 UID: 0 PID: 1563 Comm: ncdevmem2 Not tainted 6.14.0-rc2+ #9 844ddba6e7c459cafd0bf4db9a3198e Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en] Code: 41 54 4d 89 c4 4d 69 c0 c0 05 00 00 55 48 89 f5 53 48 89 fb 4c 8d b5 40 05 00 00 48 83 ec 15 RSP: 0018:ffff9dcc83fef9e8 EFLAGS: 00010202 RAX: ffffffffc0457720 RBX: ffff934ed8d40000 RCX: 0000000000000000 RDX: 000000000000001f RSI: ffff934ea508f800 RDI: ffff934ea508f808 RBP: ffff934ea508f800 R08: 000000000000b240 R09: ffff934e84f4b000 R10: ffff9dcc83fefa30 R11: ffff934e84f4b000 R12: 000000000000001f R13: ffff934ed8d40ac0 R14: ffff934ea508fd40 R15: ffff934e84f4b000 FS: 00007fa73888c740(0000) GS:ffff93559f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000b240 CR3: 0000000145a2e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? __pfx_bnxt_queue_mem_alloc+0x10/0x10 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] ? bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] netdev_rx_queue_restart+0xc5/0x240 net_devmem_bind_dmabuf_to_queue+0xf8/0x200 netdev_nl_bind_rx_doit+0x3a7/0x450 genl_family_rcv_msg_doit+0xd9/0x130 genl_rcv_msg+0x184/0x2b0 ? __pfx_netdev_nl_bind_rx_doit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 ... Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: 2d694c27d32e ("bnxt_en: implement netdev_queue_mgmt_ops") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250309134219.91670-3-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: fix truesize for mb-xdp-pass caseTaehee Yoo
When mb-xdp is set and return is XDP_PASS, packet is converted from xdp_buff to sk_buff with xdp_update_skb_shared_info() in bnxt_xdp_build_skb(). bnxt_xdp_build_skb() passes incorrect truesize argument to xdp_update_skb_shared_info(). The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but the skb_shared_info was wiped by napi_build_skb() before. So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it instead of getting skb_shared_info from xdp_get_shared_info_from_buff(). Splat looks like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3 RIP: 0010:skb_try_coalesce+0x504/0x590 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0x84/0x130 ? skb_try_coalesce+0x504/0x590 ? report_bug+0x18a/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? skb_try_coalesce+0x504/0x590 inet_frag_reasm_finish+0x11f/0x2e0 ip_defrag+0x37a/0x900 ip_local_deliver+0x51/0x120 ip_sublist_rcv_finish+0x64/0x70 ip_sublist_rcv+0x179/0x210 ip_list_rcv+0xf9/0x130 How to reproduce: <Node A> ip link set $interface1 xdp obj xdp_pass.o ip link set $interface1 mtu 9000 up ip a a 10.0.0.1/24 dev $interface1 <Node B> ip link set $interfac2 mtu 9000 up ip a a 10.0.0.2/24 dev $interface2 ping 10.0.0.1 -s 65000 Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-2-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10net: usb: lan78xx: Sanitize return values of register read/write functionsOleksij Rempel
usb_control_msg() returns the number of transferred bytes or a negative error code. The current implementation propagates the transferred byte count, which is unintended. This affects code paths that assume a boolean success/failure check, such as the EEPROM detection logic. Fix this by ensuring lan78xx_read_reg() and lan78xx_write_reg() return only 0 on success and preserve negative error codes. This approach is consistent with existing usage, as the transferred byte count is not explicitly checked elsewhere. Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/ac965de8-f320-430f-80f6-b16f4e1ba06d@sirena.org.uk Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/20250307101223.3025632-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10net/mlx5: handle errors in mlx5_chains_create_table()Wentao Liang
In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns() and mlx5_get_flow_namespace() must be checked to prevent NULL pointer dereferences. If either function fails, the function should log error message with mlx5_core_warn() and return error pointer. Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250307021820.2646-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: phy: nxp-c45-tja11xx: add TJA112XB SGMII PCS restart errataAndrei Botila
TJA1120B/TJA1121B can achieve a stable operation of SGMII after a startup event by putting the SGMII PCS into power down mode and restart afterwards. It is necessary to put the SGMII PCS into power down mode and back up. Cc: stable@vger.kernel.org Fixes: f1fe5dff2b8a ("net: phy: nxp-c45-tja11xx: add TJA1120 support") Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com> Link: https://patch.msgid.link/20250304160619.181046-3-andrei.botila@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: phy: nxp-c45-tja11xx: add TJA112X PHY configuration errataAndrei Botila
The most recent sillicon versions of TJA1120 and TJA1121 can achieve full silicon performance by putting the PHY in managed mode. It is necessary to apply these PHY writes before link gets established. Application of this fix is required after restart of device and wakeup from sleep. Cc: stable@vger.kernel.org Fixes: f1fe5dff2b8a ("net: phy: nxp-c45-tja11xx: add TJA1120 support") Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250304160619.181046-2-andrei.botila@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: mctp i2c: Copy headers if clonedMatt Johnston
Use skb_cow_head() prior to modifying the TX SKB. This is necessary when the SKB has been cloned, to avoid modifying other shared clones. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver") Link: https://patch.msgid.link/20250306-matt-mctp-i2c-cow-v1-1-293827212681@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: mctp i3c: Copy headers if clonedMatt Johnston
Use skb_cow_head() prior to modifying the tx skb. This is necessary when the skb has been cloned, to avoid modifying other shared clones. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver") Link: https://patch.msgid.link/20250306-matt-i3c-cow-head-v1-1-d5e6a5495227@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: dsa: mv88e6xxx: Verify after ATU Load opsJoseph Huang
ATU Load operations could fail silently if there's not enough space on the device to hold the new entry. When this happens, the symptom depends on the unknown flood settings. If unknown multicast flood is disabled, the multicast packets are dropped when the ATU table is full. If unknown multicast flood is enabled, the multicast packets will be flooded to all ports. Either way, IGMP snooping is broken when the ATU Load operation fails silently. Do a Read-After-Write verification after each fdb/mdb add operation to make sure that the operation was really successful, and return -ENOSPC otherwise. Fixes: defb05b9b9b4 ("net: dsa: mv88e6xxx: Add support for fdb_add, fdb_del, and fdb_getnext") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250306172306.3859214-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net/mlx5: Fill out devlink dev info only for PFsJiri Pirko
Firmware version query is supported on the PFs. Due to this following kernel warning log is observed: [ 188.590344] mlx5_core 0000:08:00.2: mlx5_fw_version_query:816:(pid 1453): fw query isn't supported by the FW Fix it by restricting the query and devlink info to the PF. Fixes: 8338d9378895 ("net/mlx5: Added devlink info callback") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Link: https://patch.msgid.link/20250306212529.429329-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07wifi: iwlwifi: trans: cancel restart work on op mode leaveMiri Korenblit
If the restart work happens to run after the opmode left (i.e. called iwl_trans_op_mode_leave), then the opmode memory (including its mutex) is likely to be freed already, and trans->opmode is NULL. Although the hw is stopped in that stage, which means that this restart got aborted (i.e. STATUS_RESET_PENDING will be cleared), it still can access trans->opmode (NULL pointer dereference) or the opmodes memory (which is freed). Fix this by canceling the restart wk in iwl_trans_op_mode_leave. Also make sure that the restart wk is really aborted. Fixes: 7391b2a4f7db ("wifi: iwlwifi: rework firmware error handling") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250306122425.801301ba1b8b.I6f6143f550b6335b699920c5d4b2b78449607a96@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-07wifi: iwlwifi: mvm: fix PNVM timeout for non-MSI-X platformsEmmanuel Grumbach
When MSI-X is not enabled, we mask all the interrupts in the interrupt handler and re-enable them when the interrupt thread runs. If STATUS_INT_ENABLED is not set, we won't re-enable in the thread. In order to get the ALIVE interrupt, we allow the ALIVE interrupt itself, and RX as well in order to receive the ALIVE notification (which is received as an RX from the firmware. The problem is that STATUS_INT_ENABLED is clear until the op_mode calls trans_fw_alive which means that until trans_fw_alive is called, any notification from the firmware will not be received. This became a problem when we inserted the pnvm_load exactly between the ALIVE and trans_fw_alive. Fix that by calling trans_fw_alive before loading the PNVM. This will allow to get the notification from the firmware about PNVM load being complete and continue the flow normally. This didn't happen on MSI-X because we don't disable the interrupts in the ISR when MSI-X is available. The error in the log looks like this: iwlwifi 0000:00:03.0: Timeout waiting for PNVM load! iwlwifi 0000:00:03.0: Failed to start RT ucode: -110 iwlwifi 0000:00:03.0: WRT: Collecting data: ini trigger 13 fired (delay=0ms). Fixes: 70d3ca86b025 ("iwlwifi: mvm: ring the doorbell and wait for PNVM load completion") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250306122425.0f2cf207aae1.I025d8f724b44f52eadf6c19069352eb9275613a8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-07wifi: iwlwifi: pcie: Fix TSO preparationIlan Peer
The allocation of the scatter gather data structure should be done based on the number of memory chunks that need to be mapped, and it is not dependent on the overall payload length. Fix it. In addition, as the skb_to_sgvec() function returns an 'int' do not assign it to an 'unsigned int' as otherwise the error check would be useless. Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250306122425.8c0e23a3d583.I3cb4d6768c9d28ce3da6cd0a6c65466176cfc1ee@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-06Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-03-05 (ice) This series contains updates to ice driver. Larysa removes modification of destination override that caused LLDP packets to be blocked. Grzegorz fixes a memory leak in aRFS. Marcin resolves an issue with operation of switchdev and LAG. Przemek adjusts order of calls for registering devlink in relation to health reporters. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: register devlink prior to creating health reporters ice: Fix switchdev slow-path in LAG ice: fix memory leak in aRFS after reset ice: do not configure destination override for switchdev ==================== Link: https://patch.msgid.link/20250305213549.1514274-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-06mctp i3c: handle NULL header addressMatt Johnston
daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver") Link: https://patch.msgid.link/20250304-mctp-i3c-null-v1-1-4416bbd56540@codeconstruct.com.au Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-05net: dsa: mt7530: Fix traffic flooding for MMIO devicesLorenzo Bianconi
On MMIO devices (e.g. MT7988 or EN7581) unicast traffic received on lanX port is flooded on all other user ports if the DSA switch is configured without VLAN support since PORT_MATRIX in PCR regs contains all user ports. Similar to MDIO devices (e.g. MT7530 and MT7531) fix the issue defining default VLAN-ID 0 for MT7530 MMIO devices. Fixes: 110c18bfed414 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com> Link: https://patch.msgid.link/20250304-mt7988-flooding-fix-v1-1-905523ae83e9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-05ice: register devlink prior to creating health reportersPrzemek Kitszel
ice_health_init() was introduced in the commit 2a82874a3b7b ("ice: add Tx hang devlink health reporter"). The call to it should have been put after ice_devlink_register(). It went unnoticed until next reporter by Konrad, which receives events from FW. FW is reporting all events, also from prior driver load, and thus it is not unlikely to have something at the very beginning. And that results in a splat: [ 24.455950] ? devlink_recover_notify.constprop.0+0x198/0x1b0 [ 24.455973] devlink_health_report+0x5d/0x2a0 [ 24.455976] ? __pfx_ice_health_status_lookup_compare+0x10/0x10 [ice] [ 24.456044] ice_process_health_status_event+0x1b7/0x200 [ice] Do the analogous thing for deinit patch. Fixes: 85d6164ec56d ("ice: add fw and port health reporters") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Konrad Knitter <konrad.knitter@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-05ice: Fix switchdev slow-path in LAGMarcin Szycik
Ever since removing switchdev control VSI and using PF for port representor Tx/Rx, switchdev slow-path has been working improperly after failover in SR-IOV LAG. LAG assumes that the first uplink to be added to the aggregate will own VFs and have switchdev configured. After failing-over to the other uplink, representors are still configured to Tx through the uplink they are set up on, which fails because that uplink is now down. On failover, update all PRs on primary uplink to use the currently active uplink for Tx. Call netif_keep_dst(), as the secondary uplink might not be in switchdev mode. Also make sure to call ice_eswitch_set_target_vsi() if uplink is in LAG. On the Rx path, representors are already working properly, because default Tx from VFs is set to PF owning the eswitch. After failover the same PF is receiving traffic from VFs, even though link is down. Fixes: defd52455aee ("ice: do Tx through PF netdev in slow-path") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-05ice: fix memory leak in aRFS after resetGrzegorz Nitka
Fix aRFS (accelerated Receive Flow Steering) structures memory leak by adding a checker to verify if aRFS memory is already allocated while configuring VSI. aRFS objects are allocated in two cases: - as part of VSI initialization (at probe), and - as part of reset handling However, VSI reconfiguration executed during reset involves memory allocation one more time, without prior releasing already allocated resources. This led to the memory leak with the following signature: [root@os-delivery ~]# cat /sys/kernel/debug/kmemleak unreferenced object 0xff3c1ca7252e6000 (size 8192): comm "kworker/0:0", pid 8, jiffies 4296833052 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): [<ffffffff991ec485>] __kmalloc_cache_noprof+0x275/0x340 [<ffffffffc0a6e06a>] ice_init_arfs+0x3a/0xe0 [ice] [<ffffffffc09f1027>] ice_vsi_cfg_def+0x607/0x850 [ice] [<ffffffffc09f244b>] ice_vsi_setup+0x5b/0x130 [ice] [<ffffffffc09c2131>] ice_init+0x1c1/0x460 [ice] [<ffffffffc09c64af>] ice_probe+0x2af/0x520 [ice] [<ffffffff994fbcd3>] local_pci_probe+0x43/0xa0 [<ffffffff98f07103>] work_for_cpu_fn+0x13/0x20 [<ffffffff98f0b6d9>] process_one_work+0x179/0x390 [<ffffffff98f0c1e9>] worker_thread+0x239/0x340 [<ffffffff98f14abc>] kthread+0xcc/0x100 [<ffffffff98e45a6d>] ret_from_fork+0x2d/0x50 [<ffffffff98e083ba>] ret_from_fork_asm+0x1a/0x30 ... Fixes: 28bf26724fdb ("ice: Implement aRFS") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-05ice: do not configure destination override for switchdevLarysa Zaremba
After switchdev is enabled and disabled later, LLDP packets sending stops, despite working perfectly fine before and during switchdev state. To reproduce (creating/destroying VF is what triggers the reconfiguration): devlink dev eswitch set pci/<address> mode switchdev echo '2' > /sys/class/net/<ifname>/device/sriov_numvfs echo '0' > /sys/class/net/<ifname>/device/sriov_numvfs This happens because LLDP relies on the destination override functionality. It needs to 1) set a flag in the descriptor, 2) set the VSI permission to make it valid. The permissions are set when the PF VSI is first configured, but switchdev then enables it for the uplink VSI (which is always the PF) once more when configured and disables when deconfigured, which leads to software-generated LLDP packets being blocked. Do not modify the destination override permissions when configuring switchdev, as the enabled state is the default configuration that is never modified. Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-04ppp: Fix KMSAN uninit-value warning with bpfJiayuan Chen
Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the ppp driver not initializing a 2-byte header when using socket filter. The following code can generate a PPP filter BPF program: ''' struct bpf_program fp; pcap_t *handle; handle = pcap_open_dead(DLT_PPP_PPPD, 65535); pcap_compile(handle, &fp, "ip and outbound", 0, 0); bpf_dump(&fp, 1); ''' Its output is: ''' (000) ldh [2] (001) jeq #0x21 jt 2 jf 5 (002) ldb [0] (003) jeq #0x1 jt 4 jf 5 (004) ret #65535 (005) ret #0 ''' Wen can find similar code at the following link: https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680 The maintainer of this code repository is also the original maintainer of the ppp driver. As you can see the BPF program skips 2 bytes of data and then reads the 'Protocol' field to determine if it's an IP packet. Then it read the first byte of the first 2 bytes to determine the direction. The issue is that only the first byte indicating direction is initialized in current ppp driver code while the second byte is not initialized. For normal BPF programs generated by libpcap, uninitialized data won't be used, so it's not a problem. However, for carefully crafted BPF programs, such as those generated by syzkaller [2], which start reading from offset 0, the uninitialized data will be used and caught by KMSAN. [1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791 [2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000 Cc: Paul Mackerras <paulus@samba.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/ Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7Luca Weiss
Enable the checksum option for these two endpoints in order to allow mobile data to actually work. Without this, no packets seem to make it through the IPA. Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-3-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ipa: Fix QSB data for v4.7Luca Weiss
As per downstream reference, max_writes should be 12 and max_reads should be 13. Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-2-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ipa: Fix v4.7 resource group namesLuca Weiss
In the downstream IPA driver there's only one group defined for source and destination, and the destination group doesn't have a _DPL suffix. Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-1-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04Merge tag 'wireless-2025-03-04' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== bugfixes for 6.14: * regressions from this cycle: - mac80211: fix sparse warning for monitor - nl80211: disable multi-link reconfiguration (needs fixing) * older issues: - cfg80211: reject badly combined cooked monitor, fix regulatory hint validity checks - mac80211: handle TXQ flush w/o driver per-sta flush, fix debugfs for monitor, fix element inheritance - iwlwifi: fix rfkill, dead firmware handling, rate API version, free A-MSDU handling, avoid large allocations, fix string format - brcmfmac: fix power handling on some boards * tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: nl80211: disable multi-link reconfiguration wifi: cfg80211: regulatory: improve invalid hints checking wifi: brcmfmac: keep power during suspend if board requires it wifi: mac80211: Fix sparse warning for monitor_sdata wifi: mac80211: fix vendor-specific inheritance wifi: mac80211: fix MLE non-inheritance parsing wifi: iwlwifi: Fix A-MSDU TSO preparation wifi: iwlwifi: Free pages allocated when failing to build A-MSDU wifi: iwlwifi: limit printed string from FW file wifi: iwlwifi: mvm: use the right version of the rate API wifi: iwlwifi: mvm: don't try to talk to a dead firmware wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspend wifi: iwlwifi: mvm: clean up ROC on failure wifi: iwlwifi: fw: avoid using an uninitialized variable wifi: iwlwifi: fw: allocate chained SG tables for dump wifi: mac80211: remove debugfs dir for virtual monitor wifi: mac80211: Cleanup sta TXQs on flush wifi: nl80211: reject cooked mode if it is set along with other flags ==================== Link: https://patch.msgid.link/20250304124435.126272-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: hns3: make sure ptp clock is unregister and freed if ↵Peiyang Wang
hclge_ptp_get_cycle returns an error During the initialization of ptp, hclge_ptp_get_cycle might return an error and returned directly without unregister clock and free it. To avoid that, call hclge_ptp_destroy_clock to unregist and free clock if hclge_ptp_get_cycle failed. Fixes: 8373cd38a888 ("net: hns3: change the method of obtaining default ptp cycle") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250228105258.1243461-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: dsa: rtl8366rb: don't prompt users for LED controlJakub Kicinski
Make NET_DSA_REALTEK_RTL8366RB_LEDS a hidden symbol. It seems very unlikely user would want to intentionally disable it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250228004534.3428681-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlinkNikolay Aleksandrov
Partially revert commit b71724147e73 ("be2net: replace polling with sleeping in the FW completion path") w.r.t mcc mutex it introduces and the use of usleep_range. The be2net be_ndo_bridge_getlink() callback is called with rcu_read_lock, so this code has been broken for a long time. Both the mutex_lock and the usleep_range can cause the issue Ian Kumlien reported[1]. The call path is: be_ndo_bridge_getlink -> be_cmd_get_hsw_config -> be_mcc_notify_wait -> be_mcc_wait_compl -> usleep_range() [1] https://lore.kernel.org/netdev/CAA85sZveppNgEVa_FD+qhOMtG_AavK9_mFiU+jWrMtXmwqefGA@mail.gmail.com/ Tested-by: Ian Kumlien <ian.kumlien@gmail.com> Fixes: b71724147e73 ("be2net: replace polling with sleeping in the FW completion path") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250227164129.1201164-1-razor@blackwall.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-28caif_virtio: fix wrong pointer check in cfv_probe()Vitaliy Shevtsov
del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs(). Fixes: 0d2e1a2926b1 ("caif_virtio: Introduce caif over virtio") Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20250227184716.4715-1-v.shevtsov@mt-integration.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27stmmac: loongson: Pass correct arg to PCI functionPhilipp Stanner
pcim_iomap_regions() should receive the driver's name as its third parameter, not the PCI device's name. Define the driver name with a macro and use it at the appropriate places, including pcim_iomap_regions(). Cc: stable@vger.kernel.org # v5.14+ Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Philipp Stanner <phasta@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Tested-by: Henry Chen <chenx97@aosc.io> Link: https://patch.msgid.link/20250226085208.97891-2-phasta@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27net: ti: icss-iep: Reject perout generation requestMeghana Malladi
IEP driver supports both perout and pps signal generation but perout feature is faulty with half-cooked support due to some missing configuration. Remove perout support from the driver and reject perout requests with "not supported" error code. Fixes: c1e0230eeaab2 ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250227092441.1848419-1-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27idpf: fix checksums set in idpf_rx_rsc()Eric Dumazet
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) Fixes: 3a8845af66edb ("idpf: add RX splitq napi poll support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alan Brady <alan.brady@intel.com> Cc: Joshua Hay <joshua.a.hay@intel.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20250226221253.1927782-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27usbnet: gl620a: fix endpoint checking in genelink_bind()Nikita Zhandarovich
Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing. [1] Syzbot report: usb 5-1: Manufacturer: syz usb 5-1: SerialNumber: syz usb 5-1: config 0 descriptor?? gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ... ------------[ cut here ]------------ usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Modules linked in: CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:3827 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_resolve_output net/core/neighbour.c:1514 [inline] neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494 neigh_output include/net/neighbour.h:539 [inline] ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819 mld_send_cr net/ipv6/mcast.c:2120 [inline] mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651 process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Reported-by: syzbot+d693c07c6f647e0388d3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d693c07c6f647e0388d3 Fixes: 47ee3051c856 ("[PATCH] USB: usbnet (5/9) module for genesys gl620a cables") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patch.msgid.link/20250224172919.1220522-1-n.zhandarovich@fintech.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-26net/mlx5: IRQ, Fix null string in debug printShay Drory
irq_pool_alloc() debug print can print a null string. Fix it by providing a default string to print. Fixes: 71e084e26414 ("net/mlx5: Allocating a pool of MSI-X vectors for SFs") Signed-off-by: Shay Drory <shayd@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501141055.SwfIphN0-lkp@intel.com/ Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250225072608.526866-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26net/mlx5: Restore missing trace event when enabling vport QoSCarolina Jubran
Restore the `trace_mlx5_esw_vport_qos_create` event when creating the vport scheduling element. This trace event was lost during refactoring. Fixes: be034baba83e ("net/mlx5: Make vport QoS enablement more flexible for future extensions") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250225072608.526866-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26net/mlx5: Fix vport QoS cleanup on errorCarolina Jubran
When enabling vport QoS fails, the scheduling node was never freed, causing a leak. Add the missing free and reset the vport scheduling node pointer to NULL. Fixes: be034baba83e ("net/mlx5: Make vport QoS enablement more flexible for future extensions") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250225072608.526866-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.Harshal Chaudhari
Non IP flow, with vlan tag not working as expected while running below command for vlan-priority. fixed that. ethtool -N eth1 flow-type ether vlan 0x8000 vlan-mask 0x1fff action 0 loc 0 Fixes: 1274daede3ef ("net: mvpp2: cls: Add steering based on vlan Id and priority.") Signed-off-by: Harshal Chaudhari <hchaudhari@marvell.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250225042058.2643838-1-hchaudhari@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 07:51:09 +0000