summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-01-14net: mvneta: fix dma sync size in mvneta_run_xdpLorenzo Bianconi
Page pool API will start syncing (if requested) starting from page->dma_addr + pool->p.offset. Fix dma sync length in mvneta_run_xdp since we do not need to account xdp headroom Fixes: 07e13edbb6a6 ("net: mvneta: get rid of huge dma sync in mvneta_rx_refill") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14r8152: add missing endpoint sanity checkJohan Hovold
Add missing endpoint sanity check to probe in order to prevent a NULL-pointer dereference (or slab out-of-bounds access) when retrieving the interrupt-endpoint bInterval on ndo_open() in case a device lacks the expected endpoints. Fixes: 40a82917b1d3 ("net/usb/r8152: enable interrupt transfer") Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14net: usb: lan78xx: limit size of local TSO packetsEric Dumazet
lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE bytes in the aggregated packets it builds, but does nothing to prevent large GSO packets being submitted. Pierre-Francois reported various hangs when/if TSO is enabled. For localy generated packets, we can use netif_set_gso_max_size() to limit the size of TSO packets. Note that forwarded packets could still hit the issue, so a complete fix might require implementing .ndo_features_check for this driver, forcing a software segmentation if the size of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com> Tested-by: RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13qmi_wwan: Add support for Quectel RM500QKristian Evensen
RM500Q is a 5G module from Quectel, supporting both standalone and non-standalone modes. The normal Quectel quirks apply (DTR and dynamic interface numbers). Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-13net: macb: fix for fixed-link modeMilind Parab
This patch fix the issue with fixed link. With fixed-link device opening fails due to macb_phylink_connect not handling fixed-link mode, in which case no MAC-PHY connection is needed and phylink_connect return success (0), however in current driver attempt is made to search and connect to PHY even for fixed-link. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Milind Parab <mparab@cadence.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-11devlink: correct misspelling of snapshotJacob Keller
The function to obtain a unique snapshot id was mistakenly typo'd as devlink_region_shapshot_id_get. Fix this typo by renaming the function and all of its users. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: phy: DP83822: Update Kconfig with DP83825I supportDan Murphy
Update the Kconfig description to indicate support for the DP83825I device as well. Fixes: 32b12dc8fde1 ("net: phy: Add DP83825I to the DP83822 driver") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: phy: DP83TC811: Fix typo in KconfigDan Murphy
Fix typo in the Kconfig for the DP83TC811 as it indicates support for the DP83TC822 which is incorrect. Fixes: 6d749428788b {"net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: stmmac: tc: Do not setup flower filtering if RSS is enabledJose Abreu
RSS, when enabled, will bypass the L3 and L4 filtering causing it not to work. Add a check before trying to setup the filters. Fixes: 425eabddaf0f ("net: stmmac: Implement L3/L4 Filters using TC Flower") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: stmmac: selftests: Update status when disabling RSSJose Abreu
We are disabling RSS on HW but not updating the internal private status to the 'disabled' state. This is needed for next tc commit that will check if RSS is disabled before trying to apply filters. Fixes: 4647e021193d ("net: stmmac: selftests: Add selftest for L3/L4 Filters") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-01-09 This series contains fixes to e1000e, igb, ixgbe, ixgbevf, i40e and iavf drivers. Brett fixes the validation of the virtchnl queue select bitmaps by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES). Radoslaw removes the limitation of only 10 filter entries for a VF and allows use of all free RAR entries for the forwarding database, if needed. Cambda Zhu fixes the calculation of queue when restoring flow director filters after resetting the adapter for ixgbe. Manfred Rudigier fixes the SGMIISFP module discovery for 100FX/LX modules for igb. Stefan Assmann fixes iavf where during a VF reset event, MAC filters were not altered, which could lead to a stale filter when an administratively set MAC address is forced by the PF. Adam adds the missing code to set the PHY access flag on X722 devices, which supports accessing PHY registers with the admin queue command. Revert a previous commit for e1000e to use "delayed work" which was causing connections to reset unexpectedly and possible driver crashes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09sh_eth: check sh_eth_cpu_data::dual_port when dumping registersSergei Shtylyov
When adding the sh_eth_cpu_data::dual_port flag I forgot to add the flag checks to __sh_eth_get_regs(), causing the non-existing TSU registers to be dumped by 'ethtool' on the single port Ether controllers having TSU... Fixes: a94cf2a614f8 ("sh_eth: fix TSU init on SH7734/R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09e1000e: Revert "e1000e: Make watchdog use delayed work"Jeff Kirsher
This reverts commit 59653e6497d16f7ac1d9db088f3959f57ee8c3db. This is due to this commit causing driver crashes and connections to reset unexpectedly. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2020-01-09i40e: Set PHY Access flag on X722Adam Ludkiewicz
The X722 FW API version 1.9 adds support for accessing PHY registers with Admin Queue Command. This enables reading EEPROM data from (Q)SFP+ transceivers, what was previously possible only on X710 devices. Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-09iavf: remove current MAC address filter on VF resetStefan Assmann
Currently MAC filters are not altered during a VF reset event. This may lead to a stale filter when an administratively set MAC is forced by the PF. For an administratively set MAC the PF driver deletes the VFs filters, overwrites the VFs MAC address and triggers a VF reset. However the VF driver itself is not aware of the filter removal, which is what the VF reset is for. The VF reset queues all filters present in the VF driver to be re-added to the PF filter list (including the filter for the now stale VF MAC address) and triggers a VIRTCHNL_OP_GET_VF_RESOURCES event, which provides the new MAC address to the VF. When this happens i40e will complain and reject the stale MAC filter, at least in the untrusted VF case. i40e 0000:08:00.0: Setting MAC 3c:fa:fa:fa:fa:01 on VF 0 iavf 0000:08:02.0: Reset warning received from the PF iavf 0000:08:02.0: Scheduling reset task i40e 0000:08:00.0: Bring down and up the VF interface to make this change effective. i40e 0000:08:00.0: VF attempting to override administratively set MAC address, bring down and up the VF interface to resume normal operation i40e 0000:08:00.0: VF 0 failed opcode 10, retval: -1 iavf 0000:08:02.0: Failed to add MAC filter, error IAVF_ERR_NVM To avoid re-adding the stale MAC filter it needs to be removed from the VF driver's filter list before queuing the existing filters. Then during the VIRTCHNL_OP_GET_VF_RESOURCES event the correct filter needs to be added again, at which point the MAC address has been updated. As a bonus this change makes bringing the VF down and up again superfluous for the administratively set MAC case. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-09igb: Fix SGMII SFP module discovery for 100FX/LX.Manfred Rudigier
Changing the link mode should also be done for 100BaseFX SGMII modules, otherwise they just don't work when the default link mode in CTRL_EXT coming from the EEPROM is SERDES. Additionally 100Base-LX SGMII SFP modules are also supported now, which was not the case before. Tested with an i210 using Flexoptix S.1303.2M.G 100FX and S.1303.10.G 100LX SGMII SFP modules. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-09ixgbe: Fix calculation of queue with VFs and flow director on interface flapCambda Zhu
This patch fixes the calculation of queue when we restore flow director filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's vf may be zero which makes the queue outside of the rx_ring array. The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry(). Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-09ixgbevf: Remove limit of 10 entries for unicast filter listRadoslaw Tyl
Currently, though the FDB entry is added to VF, it does not appear in RAR filters. VF driver only allows to add 10 entries. Attempting to add another causes an error. This patch removes limitation and allows use of all free RAR entries for the FDB if needed. Fixes: 46ec20ff7d ("ixgbevf: Add macvlan support in the set rx mode op") Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-09i40e: Fix virtchnl_queue_select bitmap validationBrett Creeley
Currently in i40e_vc_disable_queues_msg() we are incorrectly validating the virtchnl queue select bitmaps. The virtchnl_queue_select rx_queues and tx_queue bitmap is being compared against ICE_MAX_VF_QUEUES, but the problem is that these bitmaps can have a value greater than I40E_MAX_VF_QUEUES. Fix this by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES). Also, add the function i40e_vc_validate_vqs_bitmaps() that checks to see if both virtchnl_queue_select bitmaps are empty along with checking that the bitmaps only have valid bits set. This function can then be used in both the queue enable and disable flows. Suggested-by: Arkady Gilinksky <arkady.gilinsky@harmonicinc.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-08macvlan: do not assume mac_header is set in macvlan_broadcast()Eric Dumazet
Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7ddce ("[NET]: Add macvlan driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFOPetr Machata
The following patch will change PRIO to replace a removed Qdisc with an invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the graft message that is generated. But because FIFO does not issue its own REPLACE message, when the graft operation takes place, the Qdisc that mlxsw tracks under the indicated band is still the old one. The child handle (0:0) therefore does not match, and mlxsw rejects the graft operation, which leads to an extack message: Warning: Offloading graft operation failed. Fix by ignoring the invisible children in the PRIO graft handler. The DESTROY message of the removed Qdisc is going to follow shortly and handle the removal. Fixes: 32dc5efc6cb4 ("mlxsw: spectrum: qdiscs: prio: Handle graft command") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08gtp: fix bad unlock balance in gtp_encap_enable_socketEric Dumazet
WARNING: bad unlock balance detected! 5.5.0-rc5-syzkaller #0 Not tainted ------------------------------------- syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at: [<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 but there are no more locks to release! other info that might help us debug this: 2 locks held by syz-executor921/9688: #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951 stack backtrace: CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984 __lock_release kernel/locking/lockdep.c:4242 [inline] lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503 sock_release_ownership include/net/sock.h:1496 [inline] release_sock+0x17c/0x1c0 net/core/sock.c:2961 gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 gtp_encap_enable drivers/net/gtp.c:852 [inline] gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666 __rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 ____sys_sendmsg+0x753/0x880 net/socket.c:2330 ___sys_sendmsg+0x100/0x170 net/socket.c:2384 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg net/socket.c:2424 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x445d49 Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000 R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08net: stmmac: dwmac-sun8i: Allow all RGMII modesChen-Yu Tsai
Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08net: stmmac: dwmac-sunxi: Allow all RGMII modesChen-Yu Tsai
Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-07net: usb: lan78xx: fix possible skb leakEric Dumazet
If skb_linearize() fails, we need to free the skb. TSO makes skb bigger, and this bug might be the reason Raspberry Pi 3B+ users had to disable TSO. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-07net: stmmac: Fixed link does not need MDIO BusJose Abreu
When using fixed link we don't need the MDIO bus support. Reported-by: Heiko Stuebner <heiko@sntech.de> Reported-by: kernelci.org bot <bot@kernelci.org> Fixes: d3e014ec7d5e ("net: stmmac: platform: Fix MDIO init for platforms without PHY") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Acked-by: Sriram Dash <Sriram.dash@samsung.com> Tested-by: Patrice Chotard <patrice.chotard@st.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail> # Lamobo R1 (fixed-link + MDIO sub node for roboswitch). Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-07stmmac: debugfs entry name is not be changed when udev rename device name.Jiping Ma
Add one notifier for udev changes net device name. Fixes: b6601323ef9e ("net: stmmac: debugfs entry name is not be changed when udev rename") Signed-off-by: Jiping Ma <jiping.ma2@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net/mlx5: DR, Init lists that are used in rule's memberErez Shitrit
Whenever adding new member of rule object we attach it to 2 lists, These 2 lists should be initialized first. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5e: Fix hairpin RSS table sizeEli Cohen
Set hairpin table size to the corret size, based on the groups that would be created in it. Groups are laid out on the table such that a group occupies a range of entries in the table. This implies that the group ranges should have correspondence to the table they are laid upon. The patch cited below made group 1's size to grow hence causing overflow of group range laid on the table. Fixes: a795d8db2a6d ("net/mlx5e: Support RSS for IP-in-IP and IPv6 tunneled packets") Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5: DR, No need for atomic refcount for internal SW steering resourcesYevgeny Kliteynik
No need for an atomic refcounter for the STE and hashtables. These are internal SW steering resources and they are always under domain mutex. This also fixes the following refcount error: refcount_t: addition on 0; use-after-free. WARNING: CPU: 9 PID: 3527 at lib/refcount.c:25 refcount_warn_saturate+0x81/0xe0 Call Trace: dr_table_init_nic+0x10d/0x110 [mlx5_core] mlx5dr_table_create+0xb4/0x230 [mlx5_core] mlx5_cmd_dr_create_flow_table+0x39/0x120 [mlx5_core] __mlx5_create_flow_table+0x221/0x5f0 [mlx5_core] esw_create_offloads_fdb_tables+0x180/0x5a0 [mlx5_core] ... Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06Revert "net/mlx5: Support lockless FTE read lookups"Parav Pandit
This reverts commit 7dee607ed0e04500459db53001d8e02f8831f084. During cleanup path, FTE's parent node group is removed which is referenced by the FTE while freeing the FTE. Hence FTE's lockless read lookup optimization done in cited commit is not possible at the moment. Hence, revert the commit. This avoid below KAZAN call trace. [ 110.390896] BUG: KASAN: use-after-free in find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391048] Read of size 4 at addr ffff888c19e6d220 by task swapper/12/0 [ 110.391219] CPU: 12 PID: 0 Comm: swapper/12 Not tainted 5.5.0-rc1+ [ 110.391222] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/02/2014 [ 110.391225] Call Trace: [ 110.391229] <IRQ> [ 110.391246] dump_stack+0x95/0xd5 [ 110.391307] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391320] print_address_description.constprop.5+0x20/0x320 [ 110.391379] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391435] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391441] __kasan_report+0x149/0x18c [ 110.391499] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391504] kasan_report+0x12/0x20 [ 110.391511] __asan_report_load4_noabort+0x14/0x20 [ 110.391567] find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391625] del_sw_fte_rcu+0x4a/0x100 [mlx5_core] [ 110.391633] rcu_core+0x404/0x1950 [ 110.391640] ? rcu_accelerate_cbs_unlocked+0x100/0x100 [ 110.391649] ? run_rebalance_domains+0x201/0x280 [ 110.391654] rcu_core_si+0xe/0x10 [ 110.391661] __do_softirq+0x181/0x66c [ 110.391670] irq_exit+0x12c/0x150 [ 110.391675] smp_apic_timer_interrupt+0xf0/0x370 [ 110.391681] apic_timer_interrupt+0xf/0x20 [ 110.391684] </IRQ> [ 110.391695] RIP: 0010:cpuidle_enter_state+0xfa/0xba0 [ 110.391703] Code: 3d c3 9b b5 50 e8 56 75 6e fe 48 89 45 c8 0f 1f 44 00 00 31 ff e8 a6 94 6e fe 45 84 ff 0f 85 f6 02 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 db 06 00 00 4d 63 fe 4b 8d 04 7f 49 8d 04 87 49 8d [ 110.391706] RSP: 0018:ffff888c23a6fce8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 110.391712] RAX: dffffc0000000000 RBX: ffffe8ffff7002f8 RCX: 000000000000001f [ 110.391715] RDX: 1ffff11184ee6cb5 RSI: 0000000040277d83 RDI: ffff888c277365a8 [ 110.391718] RBP: ffff888c23a6fd40 R08: 0000000000000002 R09: 0000000000035280 [ 110.391721] R10: ffff888c23a6fc80 R11: ffffed11847485d0 R12: ffffffffb1017740 [ 110.391723] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000000 [ 110.391732] ? cpuidle_enter_state+0xea/0xba0 [ 110.391738] cpuidle_enter+0x4f/0xa0 [ 110.391747] call_cpuidle+0x6d/0xc0 [ 110.391752] do_idle+0x360/0x430 [ 110.391758] ? arch_cpu_idle_exit+0x40/0x40 [ 110.391765] ? complete+0x67/0x80 [ 110.391771] cpu_startup_entry+0x1d/0x20 [ 110.391779] start_secondary+0x2f3/0x3c0 [ 110.391784] ? set_cpu_sibling_map+0x2500/0x2500 [ 110.391795] secondary_startup_64+0xa4/0xb0 [ 110.391841] Allocated by task 290: [ 110.391917] save_stack+0x21/0x90 [ 110.391921] __kasan_kmalloc.constprop.8+0xa7/0xd0 [ 110.391925] kasan_kmalloc+0x9/0x10 [ 110.391929] kmem_cache_alloc_trace+0xf6/0x270 [ 110.391987] create_root_ns.isra.36+0x58/0x260 [mlx5_core] [ 110.392044] mlx5_init_fs+0x5fd/0x1ee0 [mlx5_core] [ 110.392092] mlx5_load_one+0xc7a/0x3860 [mlx5_core] [ 110.392139] init_one+0x6ff/0xf90 [mlx5_core] [ 110.392145] local_pci_probe+0xde/0x190 [ 110.392150] work_for_cpu_fn+0x56/0xa0 [ 110.392153] process_one_work+0x678/0x1140 [ 110.392157] worker_thread+0x573/0xba0 [ 110.392162] kthread+0x341/0x400 [ 110.392166] ret_from_fork+0x1f/0x40 [ 110.392218] Freed by task 2742: [ 110.392288] save_stack+0x21/0x90 [ 110.392292] __kasan_slab_free+0x137/0x190 [ 110.392296] kasan_slab_free+0xe/0x10 [ 110.392299] kfree+0x94/0x250 [ 110.392357] tree_put_node+0x257/0x360 [mlx5_core] [ 110.392413] tree_remove_node+0x63/0xb0 [mlx5_core] [ 110.392469] clean_tree+0x199/0x240 [mlx5_core] [ 110.392525] mlx5_cleanup_fs+0x76/0x580 [mlx5_core] [ 110.392572] mlx5_unload+0x22/0xc0 [mlx5_core] [ 110.392619] mlx5_unload_one+0x99/0x260 [mlx5_core] [ 110.392666] remove_one+0x61/0x160 [mlx5_core] [ 110.392671] pci_device_remove+0x10b/0x2c0 [ 110.392677] device_release_driver_internal+0x1e4/0x490 [ 110.392681] device_driver_detach+0x36/0x40 [ 110.392685] unbind_store+0x147/0x200 [ 110.392688] drv_attr_store+0x6f/0xb0 [ 110.392693] sysfs_kf_write+0x127/0x1d0 [ 110.392697] kernfs_fop_write+0x296/0x420 [ 110.392702] __vfs_write+0x66/0x110 [ 110.392707] vfs_write+0x1a0/0x500 [ 110.392711] ksys_write+0x164/0x250 [ 110.392715] __x64_sys_write+0x73/0xb0 [ 110.392720] do_syscall_64+0x9f/0x3a0 [ 110.392725] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 7dee607ed0e0 ("net/mlx5: Support lockless FTE read lookups") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5: Move devlink registration before interfaces loadMichael Guralnik
Register devlink before interfaces are added. This will allow interfaces to use devlink while initalizing. For example, call mlx5_is_roce_enabled. Fixes: aba25279c100 ("net/mlx5e: Add TX reporter support") Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5e: Always print health reporter message to dmesgEran Ben Elisha
In case a reporter exists, error message is logged only to the devlink tracer. The devlink tracer is a visibility utility only, which user can choose not to monitor. After cited patch, 3rd party monitoring tools that tracks these error message will no longer find them in dmesg, causing a regression. With this patch, error messages are also logged into the dmesg. Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5e: Avoid duplicating rule destinationsDmytro Linkin
Following scenario easily break driver logic and crash the kernel: 1. Add rule with mirred actions to same device. 2. Delete this rule. In described scenario rule is not added to database and on deletion driver access invalid entry. Example: $ tc filter add dev ens1f0_0 ingress protocol ip prio 1 \ flower skip_sw \ action mirred egress mirror dev ens1f0_1 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter del dev ens1f0_0 ingress protocol ip prio 1 Dmesg output: [ 376.634396] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 3439): DESTROY_FLOW_GROUP(0x934) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x563e2f) [ 376.654983] mlx5_core 0000:82:00.0: del_hw_flow_group:567:(pid 3439): flow steering can't destroy fg 89 of ft 3145728 [ 376.673433] kasan: CONFIG_KASAN_INLINE enabled [ 376.683769] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 376.695229] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [ 376.705069] CPU: 7 PID: 3439 Comm: tc Not tainted 5.4.0-rc5+ #76 [ 376.714959] Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0a 08/12/2016 [ 376.726371] RIP: 0010:mlx5_del_flow_rules+0x105/0x960 [mlx5_core] [ 376.735817] Code: 01 00 00 00 48 83 eb 08 e8 28 d9 ff ff 4c 39 e3 75 d8 4c 8d bd c0 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 84 04 00 00 48 8d 7d 28 8b 9 d [ 376.761261] RSP: 0018:ffff888847c56db8 EFLAGS: 00010202 [ 376.770054] RAX: dffffc0000000000 RBX: ffff8888582a6da0 RCX: ffff888847c56d60 [ 376.780743] RDX: 0000000000000058 RSI: 0000000000000008 RDI: 0000000000000282 [ 376.791328] RBP: 0000000000000000 R08: fffffbfff0c60ea6 R09: fffffbfff0c60ea6 [ 376.802050] R10: fffffbfff0c60ea5 R11: ffffffff8630752f R12: ffff8888582a6da0 [ 376.812798] R13: dffffc0000000000 R14: ffff8888582a6da0 R15: 00000000000002c0 [ 376.823445] FS: 00007f675f9a8840(0000) GS:ffff88886d200000(0000) knlGS:0000000000000000 [ 376.834971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 376.844179] CR2: 00000000007d9640 CR3: 00000007d3f26003 CR4: 00000000001606e0 [ 376.854843] Call Trace: [ 376.868542] __mlx5_eswitch_del_rule+0x49/0x300 [mlx5_core] [ 376.877735] mlx5e_tc_del_fdb_flow+0x6ec/0x9e0 [mlx5_core] [ 376.921549] mlx5e_flow_put+0x2b/0x50 [mlx5_core] [ 376.929813] mlx5e_delete_flower+0x5b6/0xbd0 [mlx5_core] [ 376.973030] tc_setup_cb_reoffload+0x29/0xc0 [ 376.980619] fl_reoffload+0x50a/0x770 [cls_flower] [ 377.015087] tcf_block_playback_offloads+0xbd/0x250 [ 377.033400] tcf_block_setup+0x1b2/0xc60 [ 377.057247] tcf_block_offload_cmd+0x195/0x240 [ 377.098826] tcf_block_offload_unbind+0xe7/0x180 [ 377.107056] __tcf_block_put+0xe5/0x400 [ 377.114528] ingress_destroy+0x3d/0x60 [sch_ingress] [ 377.122894] qdisc_destroy+0xf1/0x5a0 [ 377.129993] qdisc_graft+0xa3d/0xe50 [ 377.151227] tc_get_qdisc+0x48e/0xa20 [ 377.165167] rtnetlink_rcv_msg+0x35d/0x8d0 [ 377.199528] netlink_rcv_skb+0x11e/0x340 [ 377.219638] netlink_unicast+0x408/0x5b0 [ 377.239913] netlink_sendmsg+0x71b/0xb30 [ 377.267505] sock_sendmsg+0xb1/0xf0 [ 377.273801] ___sys_sendmsg+0x635/0x900 [ 377.312784] __sys_sendmsg+0xd3/0x170 [ 377.338693] do_syscall_64+0x95/0x460 [ 377.344833] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 377.352321] RIP: 0033:0x7f675e58e090 To avoid this, for every mirred action check if output device was already processed. If so - drop rule with EOPNOTSUPP error. Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net: atlantic: remove duplicate entriesIgor Russkikh
Function entries were duplicated accidentally, removing the dups. Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: atlantic: loopback configuration in improper placeIgor Russkikh
Initial loopback configuration should be called earlier, before starting traffic on HW blocks. Otherwise depending on race conditions it could be kept disabled. Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: atlantic: broken link status on old fwIgor Russkikh
Last code/checkpatch cleanup did a copy paste error where code from firmware 3 API logic was moved to firmware 1 logic. This resulted in FW1.x users would never see the link state as active. Fixes: 7b0c342f1f67 ("net: atlantic: code style cleanup") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: dsa: mv88e6xxx: Preserve priority when setting CPU port.Andrew Lunn
The 6390 family uses an extended register to set the port connected to the CPU. The lower 5 bits indicate the port, the upper three bits are the priority of the frames as they pass through the switch, what egress queue they should use, etc. Since frames being set to the CPU are typically management frames, BPDU, IGMP, ARP, etc set the priority to 7, the reset default, and the highest. Fixes: 33641994a676 ("net: dsa: mv88e6xxx: Monitor and Management tables") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: ethernet: sxgbe: Rename Samsung to lowercaseKrzysztof Kozlowski
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: wan: sdla: Fix cast from pointer to integer of different sizeKrzysztof Kozlowski
Since net_device.mem_start is unsigned long, it should not be cast to int right before casting to pointer. This fixes warning (compile testing on alpha architecture): drivers/net/wan/sdla.c: In function ‘sdla_transmit’: drivers/net/wan/sdla.c:711:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05macb: Don't unregister clks unconditionallyStephen Boyd
The only clk init function in this driver that register a clk is fu540_c000_clk_init(), and thus we need to unregister the clk when this driver is removed on that platform. Other init functions, for example macb_clk_init(), don't register clks and therefore we shouldn't unregister the clks when this driver is removed. Convert this registration path to devm so it gets auto-unregistered when this driver is removed and drop the clk_unregister() calls in driver remove (and error paths) so that we don't erroneously remove a clk from the system that isn't registered by this driver. Otherwise we get strange crashes with a use-after-free when the devm_clk_get() call in macb_clk_init() calls clk_put() on a clk pointer that has become invalid because it is freed in clk_unregister(). Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Yash Shah <yash.shah@sifive.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-05drivers/net/b44: Change to non-atomic bit operations on pwol_maskFenghua Yu
Atomic operations that span cache lines are super-expensive on x86 (not just to the current processor, but also to other processes as all memory operations are blocked until the operation completes). Upcoming x86 processors have a switch to cause such operations to generate a #AC trap. It is expected that some real time systems will enable this mode in BIOS. In preparation for this, it is necessary to fix code that may execute atomic instructions with operands that cross cachelines because the #AC trap will crash the kernel. Since "pwol_mask" is local and never exposed to concurrency, there is no need to set bits in pwol_mask using atomic operations. Directly operate on the byte which contains the bit instead of using __set_bit() to avoid any big endian concern due to type cast to unsigned long in __set_bit(). Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03net: Google gve: Remove dma_wmb() before ringing doorbellLiran Alon
Current code use dma_wmb() to ensure Rx/Tx descriptors are visible to device before writing to doorbell. However, these dma_wmb() are wrong and unnecessary. Therefore, they should be removed. iowrite32be() called from gve_rx_write_doorbell()/gve_tx_put_doorbell() should guaratee that all previous writes to WB/UC memory is visible to device before the write done by iowrite32be(). E.g. On ARM64, iowrite32be() calls __iowmb() which expands to dma_wmb() and only then calls __raw_writel(). Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03net: phylink: fix failure to register on x86 systemsRussell King
The kernel test robot reports a boot failure with qemu in 5.5-rc, referencing commit 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer"). This is caused by phylink_create() being passed a NULL fwnode, causing fwnode_property_get_reference_args() to return -EINVAL. Don't attempt to attach to a SFP bus if we have no fwnode, which avoids this issue. Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02Merge tag 'linux-can-fixes-for-5.5-20200102' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-01-02 this is a pull request of 9 patches for net/master. The first 5 patches target all the tcan4x5x driver. The first 3 patches of them are by Dan Murphy and Sean Nyekjaer and improve the device initialization (power on, reset and get device out of standby before register access). The next patch is by Dan Murphy and disables the INH pin device-state if the GPIO is unavailable. The last patch for the tcan4x5x driver is by Gustavo A. R. Silva and fixes an inconsistent PTR_ERR check in the tcan4x5x_parse_config() function. The next patch is by Oliver Hartkopp and targets the generic CAN device infrastructure. It ensures that an initialized headroom in outgoing CAN sk_buffs (e.g. if injected by AF_PACKET). The last 2 patches are by Johan Hovold and fix the kvaser_usb and gs_usb drivers by always using the current alternate setting not blindly the first one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02net: freescale: fec: Fix ethtool -d runtime PMAndrew Lunn
In order to dump the FECs registers the clocks have to be ticking, otherwise a data abort occurs. Add calls to runtime PM so they are enabled and later disabled. Fixes: e8fcfcd5684a ("net: fec: optimize the clock management to save power") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02vxlan: fix tos value before xmitHangbin Liu
Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02net: dsa: mv88e6xxx: force cmode write on 6141/6341Baruch Siach
mv88e6xxx_port_set_cmode() relies on cmode stored in struct mv88e6xxx_port to skip cmode update when the requested value matches the cached value. It turns out that mv88e6xxx_port_hidden_write() might change the port cmode setting as a side effect, so we can't rely on the cached value to determine that cmode update in not necessary. Force cmode update in mv88e6341_port_set_cmode(), to make serdes configuration work again. Other mv88e6xxx_port_set_cmode() callers keep the current behaviour. This fixes serdes configuration of the 6141 switch on SolidRun Clearfog GT-8K. Fixes: 7a3007d22e8 ("net: dsa: mv88e6xxx: fully support SERDES on Topaz family") Reported-by: Denis Odintsov <d.odintsov@traviangames.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling ↵Florian Faber
to irq mode Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: gs_usb: gs_usb_probe(): use descriptors of current altsettingJohan Hovold
Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by: Johan Hovold <johan@kernel.org> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-07-16 10:46:02 +0000