summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-11-20cxgb4: add TC-MATCHALL classifier ingress offloadRahul Lakkireddy
Add TC-MATCHALL classifier ingress offload support. The same actions supported by existing TC-FLOWER offload can be applied to all incoming traffic on the underlying interface. Ensure the rule priority doesn't conflict with existing rules in the TCAM. Only 1 ingress matchall rule can be active at a time on the underlying interface. v5: - No change. v4: - Added check to ensure the matchall rule's prio doesn't conflict with other rules in TCAM. - Added logic to fill default mask for VIID, if none has been provided, to prevent conflict with duplicate VIID rules. - Used existing variables in private structure to fill VIID info, instead of extracting the info manually. v3: - No change. v2: - Removed logic to fetch free index from end of TCAM. Must maintain same ordering as in kernel. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20cxgb4: check rule prio conflicts before offloadRahul Lakkireddy
Only offload rule if it satisfies both of the following conditions: 1. The immediate previous rule has priority <= current rule's priority. 2. The immediate next rule has priority >= current rule's priority. Also rework free entry fetch logic to search from end of TCAM, instead of beginning, because higher indices have lower priority than lower indices. This is similar to how TC auto generates priority values. v5: - Fixed commit message and comment to include comparison for equal priority. v4: - Patch added in this version. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20cxgb4: add TC-MATCHALL classifier egress offloadRahul Lakkireddy
Add TC-MATCHALL classifier offload with TC-POLICE action applied for all outgoing traffic on the underlying interface. Split flow block offload to support both egress and ingress classification. For example, to rate limit all outgoing traffic to 1 Gbps: $ tc qdisc add dev enp2s0f4 clsact $ tc filter add dev enp2s0f4 egress matchall skip_sw \ action police rate 1Gbit burst 8Kbit Note that skip_sw is important. Otherwise, both stack and hardware will end up doing policing. Policing can't be shared across flow blocks. Only 1 egress matchall rule can be active at a time on the underlying interface. v5: - No change. v4: - Removed check to reject police offload if prio is not 1. - Moved TC_SETUP_BLOCK code to separate function. v3: - Added check to reject police offload if prio is not 1. - Assign block_shared variable only for TC_SETUP_BLOCK. v2: - Added check to reject flow block sharing for policers. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net/mlx5e: Rx, Update page pool numa node when changedSaeed Mahameed
Once every napi poll cycle, check if numa node is different than the page pool's numa id, and update it using page_pool_update_nid(). Alternatively, we could have registered an irq affinity change handler, but page_pool_update_nid() must be called from napi context anyways, so the handler won't actually help. Performance testing: XDP drop/tx rate and TCP single/multi stream, on mlx5 driver while migrating rx ring irq from close to far numa: mlx5 internal page cache was locally disabled to get pure page pool results. CPU: Intel(R) Xeon(R) CPU E5-2603 v4 @ 1.70GHz NIC: Mellanox Technologies MT27700 Family [ConnectX-4] (100G) XDP Drop/TX single core: NUMA | XDP | Before | After --------------------------------------- Close | Drop | 11 Mpps | 10.9 Mpps Far | Drop | 4.4 Mpps | 5.8 Mpps Close | TX | 6.5 Mpps | 6.5 Mpps Far | TX | 3.5 Mpps | 4 Mpps Improvement is about 30% drop packet rate, 15% tx packet rate for numa far test. No degradation for numa close tests. TCP single/multi cpu/stream: NUMA | #cpu | Before | After -------------------------------------- Close | 1 | 18 Gbps | 18 Gbps Far | 1 | 15 Gbps | 18 Gbps Close | 12 | 80 Gbps | 80 Gbps Far | 12 | 68 Gbps | 80 Gbps In all test cases we see improvement for the far numa case, and no impact on the close numa case. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switchIlias Apalodimas
CPSW switchdev based driver which is operating in dual-emac mode by default, thus working as 2 individual network interfaces. The Switch mode can be enabled by configuring devlink driver parameter "switch_mode" to 1: devlink dev param set platform/48484000.switch \ name switch_mode value 1 cmode runtime This can be done regardless of the state of Port's netdevs - UP/DOWN, but Port's netdev devices have to be UP before joining the bridge to avoid overwriting of bridge configuration as CPSW switch driver completely reloads its configuration when first Port changes its state to UP. When the both interfaces joined the bridge - CPSW switch driver will start marking packets with offload_fwd_mark flag unless "ale_bypass=0". All configuration is implemented via switchdev API and notifiers. Supported: - SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS - SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS: BR_MCAST_FLOOD - SWITCHDEV_ATTR_ID_PORT_STP_STATE - SWITCHDEV_OBJ_ID_PORT_VLAN - SWITCHDEV_OBJ_ID_PORT_MDB - SWITCHDEV_OBJ_ID_HOST_MDB Hence CPSW switchdev driver supports: - FDB offloading - MDB offloading - VLAN filtering and offloading - STP Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emacIlias Apalodimas
Part 1: Introduce basic CPSW dual_mac driver (cpsw_new.c) which is operating in dual-emac mode by default, thus working as 2 individual network interfaces. Main differences from legacy CPSW driver are: - optimized promiscuous mode: The P0_UNI_FLOOD (both ports) is enabled in addition to ALLMULTI (current port) instead of ALE_BYPASS. So, Ports in promiscuous mode will keep possibility of mcast and vlan filtering, which is provides significant benefits when ports are joined to the same bridge, but without enabling "switch" mode, or to different bridges. - learning disabled on ports as it make not too much sense for segregated ports - no forwarding in HW. - enabled basic support for devlink. devlink dev show platform/48484000.switch devlink dev param show platform/48484000.switch: name ale_bypass type driver-specific values: cmode runtime value false - "ale_bypass" devlink driver parameter allows to enable ALE_CONTROL(4).BYPASS mode for debug purposes. - updated DT bindings. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: cpsw: move set of common functions in cpsw_privGrygorii Strashko
As a preparatory patch to add support for a switchdev based cpsw driver, move common functions to cpsw-priv.c so that they can be used across both drivers. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: cpsw: resolve build deps of cpsw driversGrygorii Strashko
A following patches introduce new CPSW switchdev driver which uses common code with legacy CPSW driver. This will introduce build dependency between CPSW switchdev and CPSW legacy drivers related to for_each_slave() and cpsw_slave_index() - they can be compiled both, but only one of them will be not functional depending in Kconfig settings due to duffrences in Slave Ports indexes calculation. To fix this make for_each_slave() local (it's used now only by legacy CPSW driver) and convert cpsw_slave_index() to be a function pointer which is assigned in probe. Driver to probe is defined by DT. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: ale: modify vlan/mdb api for switchdevIlias Apalodimas
A following patch introduces switchdev functionality, so modify ALE engine VLANs/MDBs API: - cpsw_ale_del_mcast(): update so it will remove only selected ports from mcast port_mask or delete whole mcast record if !port_mask - cpsw_ale_del_vlan(): update so it will remove only selected ports from all VLAN record's masks or delete whole VLAN record if !port_mask - add cpsw_ale_vlan_add_modify() to add or modify existing VLAN record's masks - add cpsw_ale_set_unreg_mcast() for enabling unreg mcast on port VLANs Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: cpsw: allow untagged traffic on host portGrygorii Strashko
Now untagged vlan traffic is not support on Host P0 port. This patch adds in ALE context bitmap of VLANs for which Host P0 port bit set in Force Untagged Packet Egress bitmask in VLANs ALE entries, and adds corresponding check in VLAN incapsulation header parsing function cpsw_rx_vlan_encap(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: ethernet: ti: ale: clean ale tbl on init and intf restartGrygorii Strashko
Clean CPSW ALE on init and intf restart (up/down) to avoid reading obsolete or garbage entries from ALE table. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20Merge tag 'mt76-for-kvalo-2019-11-20' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 5.5 * monitor mode fix for mt7615 * fixes for rx aggregation race conditions * cleanups * mt7615 smart carrier sense support * code unification / deduplication * mt7615 debugfs improvements * debugfs aggregation statistics * airtime fairness support * mt76x0 OF mac address support * locking fixes * usb support improvements * rate control fixes
2019-11-20mt76: mt76u: fix endpoint definition orderLorenzo Bianconi
Even if they are not currently used fix BK/BE endpoint definition order. Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: read {tx,rx} mask from eepromLorenzo Bianconi
Parse configured {tx,rx} mask from eeprom data instead of just setting it to four tx-rx streams Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move mt76_get_antenna in mt76_core moduleLorenzo Bianconi
Move mt76_get_antenna in mac80211.c in order to be reused by all drivers. Initialize .get_antenna function pointer for mt76x0, mt7603, mt7615 and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txsLorenzo Bianconi
Fix possible out-of-bound access of status rates array in mt7615_fill_txs/mt7603_fill_txs routines Fixes: c5211e997eca ("mt76: mt7603: rework and fix tx status reporting") Fixes: 4af81f02b49c ("mt76: mt7615: sync with mt7603 rate control changes") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20Revert "mt76: mt76x0e: don't use hw encryption for MT7630E"Stanislaw Gruszka
This reverts commit 34b0e9b767bfa09ae233ca0d6ceb299bf2e24600. Since commit 7bd0650be63c ("mt76: dma: fix buffer unmap with non-linear skbs") is no longer necessary to disable HW encryption for MT7630E. Disabling HW encryption helped previously because somehow fragmented skb's are not created if mac80211 encrypt frames, so buffer unmap bug of non-linear skbs was not triggered. Now since this bug is properly fixed by commit 7bd0650be63c ("mt76: dma: fix buffer unmap with non-linear skbs") , we can enable HW encryption back. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: disable radar pattern detector during scanningLorenzo Bianconi
Set switch_reason to CH_SWITCH_SCAN_BYPASS_DPD during frequency scanning in order to disable radar pattern detector Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move interface_modes definition in mt76_core moduleLorenzo Bianconi
Move interface modes declaration in common code since now mt76 chipsets support all modes (NL80211_IFTYPE_STATION, NL80211_IFTYPE_AP, NL80211_IFTYPE_MESH_POINT and NL80211_IFTYPE_ADHOC) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: add ibss supportLorenzo Bianconi
Enable IFTYPE_ADHOC support on 7615 devices. The feature has been tested using a mt76x2 device as wireless peer. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move SUPPORTS_REORDERING_BUFFER hw property in mt76_register_deviceLorenzo Bianconi
Move SUPPORTS_REORDERING_BUFFER hw property configuration from chip specific code to mt76_register_device since it is supported by all mt76 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: use mt76_dev in mt76_is_{mmio,usb}Lorenzo Bianconi
Convert mt76_is_mmio and mt76_is_usb to rely on mt76_dev instead of mt76x02_dev since this is a property not strictly related to hw chipset and it will be more reusable Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: Remove set but not used variable 'idx'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/dma.c: In function mt76_dma_rx_fill: drivers/net/wireless/mediatek/mt76/dma.c:377:6: warning: variable idx set but not used [-Wunused-but-set-variable] It is not used since commit 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76u: rely on a dedicated stats workqueueLorenzo Bianconi
rate controller and throughput are very sensitive to tx status timing. In order to improve performances when the system is heavily loaded, substitute stat_work delayed_work with a regular work_struct and create a mt76u dedicated workqueue for tx status reporting Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76u: rely on usb_interface instead of usb_devLorenzo Bianconi
usb drivers are supposed to communicate using usb_interface instead mt76x{0,2}u is now registering through usb_device. Fix it by passing usb_intf device to mt76_alloc_device routine. Fixes: 112f980ac8926 ("mt76usb: use usb_dev private data") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-By: Zero_Chaos <sidhayn@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: remove unneeded semicolonYueHaibing
remove unneeded semicolon. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0: remove 350ms delay in mt76x0_phy_calibrateLorenzo Bianconi
Since mt76x0 does not save the phy calibration data it is not necessary to wait 350ms in mt76x0_phy_calibrate Tested-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02u: update ewma pkt len in mt76x02u_tx_prepare_skbLorenzo Bianconi
Update ewma packet length in mt76x02u_tx_prepare_skb as it is done for pci counterpart in order to properly estimate tx time on current channel Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: remove obsolete .add_buf() from struct mt76_queue_opsFelix Fietkau
It hasn't been used in a while Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: add sanity check for a-mpdu rx wcid indexFelix Fietkau
Avoid dereferencing invalid ids Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: refactor cc_lock locking schemeLorenzo Bianconi
Read busy counters not holding cc_lock spinlock since usb read can't be performed in interrupt context. Move cc_active and cc_rx counters out of cc_lock since they are not modified in interrupt context. Grab cc_lock updating cur_cc_bss_rx in mt76_airtime_report and do not hold rx_lock in mt76_update_survey. Moreover grab mt76 mutex in mt76_get_survey before running mt76_update_survey. This patch fixes the following 'schedule while atomic' [ 291.790866] BUG: scheduling while atomic: iw/2161/0x00000202 [ 291.791002] Preemption disabled at: [ 291.791007] [<0000000000000000>] 0x0 [ 291.791015] CPU: 0 PID: 2161 Comm: iw Tainted: G W 5.4.= 0-rc2-3-ARCH-00104-g9e208aa06c21 #1 [ 291.791017] Hardware name: LENOVO 2349QM6/2349QM6, BIOS G1ETC2WW (2.82=) 08/07/2019 [ 291.791019] Call Trace: [ 291.791042] dump_stack+0x5c/0x80 [ 291.791049] __schedule_bug.cold+0x8e/0x9b [ 291.791055] __schedule+0x5f8/0x770 [ 291.791062] schedule+0x43/0xd0 [ 291.791068] schedule_preempt_disabled+0x14/0x20 [ 291.791074] __mutex_lock.isra.0+0x18a/0x530 [ 291.791099] mt76u_rr+0x1f/0x40 [mt76_usb] [ 291.791113] mt76x02_update_channel+0x22/0x40 [mt76x02_lib] [ 291.791122] mt76_update_survey+0x42/0xe0 [mt76] [ 291.791129] mt76_get_survey+0x2f/0x1b0 [mt76] [ 291.791170] ieee80211_dump_survey+0x5e/0x140 [mac80211] [ 291.791217] nl80211_dump_survey+0x13c/0x2f0 [cfg80211] [ 291.791222] ? __kmalloc_reserve.isra.0+0x2d/0x70 [ 291.791225] ? __alloc_skb+0x96/0x1d0 [ 291.791229] netlink_dump+0x17b/0x370 [ 291.791247] __netlink_dump_start+0x16f/0x1e0 [ 291.791253] genl_family_rcv_msg+0x396/0x410 [ 291.791290] ? nl80211_prepare_wdev_dump+0x1b0/0x1b0 [cfg80211] [ 291.791297] ? _raw_spin_unlock_irqrestore+0x20/0x40 [ 291.791312] ? __wake_up_common_lock+0x8a/0xc0 [ 291.791316] genl_rcv_msg+0x47/0x90 [ 291.791320] ? genl_family_rcv_msg+0x410/0x410 [ 291.791323] netlink_rcv_skb+0x49/0x110 [ 291.791329] genl_rcv+0x24/0x40 [ 291.791333] netlink_unicast+0x171/0x200 [ 291.791340] netlink_sendmsg+0x208/0x3d0 [ 291.791358] sock_sendmsg+0x5e/0x60 [ 291.791361] ___sys_sendmsg+0x2ae/0x330 [ 291.791368] ? filemap_map_pages+0x272/0x390 [ 291.791374] ? _raw_spin_unlock+0x16/0x30 [ 291.791379] ? __handle_mm_fault+0x112f/0x1390 [ 291.791388] __sys_sendmsg+0x59/0xa0 [ 291.791396] do_syscall_64+0x5b/0x1a0 [ 291.791400] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 291.791404] RIP: 0033:0x7f5d0c7f37b7 [ 291.791418] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 0= 0 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05= <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 291.791421] RSP: 002b:00007ffe8b5d0538 EFLAGS: 00000246 ORIG_RAX: 0000= 00000000002e [ 291.791426] RAX: ffffffffffffffda RBX: 000055a038e6c390 RCX: 00007f5d0= c7f37b7 [ 291.791430] RDX: 0000000000000000 RSI: 00007ffe8b5d0570 RDI: 000000000= 0000003 [ 291.791434] RBP: 000055a038e718c0 R08: 000055a038e6c02a R09: 000000000= 0000002 [ 291.791438] R10: 000055a03808cb00 R11: 0000000000000246 R12: 000055a03= 8e71780 [ 291.791440] R13: 00007ffe8b5d0570 R14: 000055a038e717d0 R15: 000055a03= 8e718c0 [ 291.791480] NOHZ: local_softirq_pending 202 Fixes: 168aea24f4bb ("mt76: mt76x02u: enable survey support") Tested-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0: eeprom: add support for MAC address from OFPawel Dembicki
mt76x0e driver only supports MAC addresses from calibration data eeprom. Many routers however do not have a valid stock address set in this field. This patch makes it possible to take a MAC address from OF (e.g. from mtd). Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [adjusted for kernel submission] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: avoid enabling interrupt if NAPI poll is still pendingFelix Fietkau
if napi_complete() returns false, it means that polling is still pending. Interrupts should not fire until the polling is no longer scheduled Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: fix aggregation stop issueFelix Fietkau
Cancel the workqueue after the tid has been cleaned up, in order to avoid a possible rescheduling from within the work function. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: drop rcu read lock in mt76_rx_aggr_stopFelix Fietkau
A rcu read locked section is not allowed to sleep, and the rcu lock here isn't actually necessary, because we're holding dev->mutex. Fixes an issue when the tid work item is still running while freeing a station or stopping the aggregation session Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: add missing locking around ampdu actionFelix Fietkau
This is needed primarily to avoid races in dealing with rx aggregation related data structures Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: do not use devm API for led classdevFelix Fietkau
With the devm API, the unregister happens after the device cleanup is done, after which the struct mt76_dev which contains the led_cdev has already been freed. This leads to a use-after-free bug that can crash the system. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: enable airtime fairnessFelix Fietkau
It is supported by all hardware drivers now Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
2019-11-20mt76: mt7615: track tx/rx airtime for airtime fairnessLorenzo Bianconi
Poll per-station hardware counters available in WTBL after tx/rx status events in order to report tx/rx airtime to mac80211 layer Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: introduce mt7615_mac_wtbl_update routineLorenzo Bianconi
Introduce mt7615_mac_wtbl_update utility routine in order to update WTBL update register Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: fix survey channel busy timeFelix Fietkau
Like on mt7603, MIB status register 16 tracks CCA time, but does not include tx time. Switch to status register 9 to includ NAV and tx time as well. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: report tx_time, bss_rx and busy time to mac80211Lorenzo Bianconi
Report tx time/rx time and obss time from hw mib counters to fill survey info requested by mac80211 Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: track approximate tx airtime for airtime fairness and surveyFelix Fietkau
Estimate by calculating duration for EWMA packet size + estimated A-MPDU length on tx status events Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_resetFelix Fietkau
Reduces code duplication and adds missing bits for USB variants Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: unify channel survey update codeFelix Fietkau
Host time is used to calculate the channel active time on mt7603 and mt7615. Use the same on mt76x02 and move the lock to core code to get rid of some duplicated code. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7603: switch to a different counter for survey busy timeFelix Fietkau
MT_MIB_STAT_PSCCA only counts rx CCA busy time, which does not include tx time. MT_MIB_STAT_CCA counts full busy time, including Rx, Tx and NAV Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7603: track tx airtime for airtime fairness and surveyFelix Fietkau
Poll per-station hardware counters after tx status events Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: track rx airtime for airtime fairness and surveyFelix Fietkau
Report total rx airtime for valid stations as BSS rx time in survey mt7615 is left out for now, it will be supported later by reading hardware counters instead of calculating airtime in software Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: store current channel survey_state in struct mt76_devFelix Fietkau
Move mt76_channel_state() from mt76.h to mac80211.c Preparation for updating channel state from more places in the drivers/core Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4Felix Fietkau
This reduces the struct size and is useful for adding more flags later Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-07-19 07:10:11 +0000