summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-11-20mt76: report rx a-mpdu subframe statusFelix Fietkau
This can be used in monitor mode to figure out which subframes were sent as part of which A-MPDU Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7603: remove q_rx field from struct mt7603_devFelix Fietkau
It is no longer used Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7603: collect aggregation statsLorenzo Bianconi
Introduce ampdu_stat entry in mt7603 debugfs in order to dump 802.11 aggr cumulative statistics Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: collect aggregation statsLorenzo Bianconi
Introduce ampdu_stat entry in mt7615 debugfs in order to dump 802.11 aggr cumulative statistics Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move aggr_stats array in mt76_devLorenzo Bianconi
Move aggr_stats array from mt76x02_dev to mt76_dev in order to be reused adding aggregation stats for mt7603/mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: add queue entry in debugfsLorenzo Bianconi
Introduce mt7615_queues_read routine to dump hw queue related info. Add hw ac queues statistics in mt7615 debugfs Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move queue debugfs entry to driver specific codeLorenzo Bianconi
Move queue debugfs entry to driver specific code since mt7615 devices rely on a different queue layout Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb moduleLorenzo Bianconi
Unify mt76x02u_mac_start between mt76x2u and mt76x0u since the code is shared between both drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0u: reset counter starting the deviceLorenzo Bianconi
Remove mt76x02_mac_reset_counters from mt76x0_init_hardware since it will be run starting the device Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_startLorenzo Bianconi
Move mt76x02_mac_reset_counters in mt76x02_mac_start and get rid of mt76x2_mac_start since it is just a wrapper for mt76x02_mac_start Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: move mac_reset_counter in mt76x02_lib moduleLorenzo Bianconi
Unify mac_reset_counter routine and move it in mt76x02_lib module since it is shared by all mt76x02 drivers (pci/usb) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: enable SCS by defaultLorenzo Bianconi
Enable Smart Carrier Sense algorithm by default in order to improve performances in a noisy environment Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smallerColin Ian King
Don't populate the array mt76x0_chan_map on the stack but instead make it static const. Makes the object code smaller by 80 bytes. Before: text data bss dec hex filename 7685 1192 0 8877 22ad mediatek/mt76/mt76x0/eeprom.o After: text data bss dec hex filename 7541 1256 0 8797 225d mediatek/mt76/mt76x0/eeprom.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: usb: add lockdep_assert_held in __mt76u_vendor_requestLorenzo Bianconi
Introduce lockdep_assert_held macro in __mt76u_vendor_request routine and remove comments regarding usb_ctrl_mtx lock Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: remove empty flag in mt76_txq_schedule_listLorenzo Bianconi
Remove empty flag in mt76_txq_schedule_list and mt76_txq_send_burst since we just need retry_q length to notify mac80211 to reschedule the current tx queue Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: use cancel_delayed_work_sync in mt76_rx_aggr_shutdownFelix Fietkau
The workqueue item needs to be fully shut down before the struct can be freed. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: remove aggr_work field from struct mt76_wcidFelix Fietkau
It is unused Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: fix control frame rx in monitor modeFelix Fietkau
Adjust filters and ensure frames don't get sent to MCU instead of host Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20iwlwifi: bump FW API to 52 for 22000 seriesLuca Coelho
Start supporting API version 52 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: check kasprintf() return valueJohannes Berg
kasprintf() can fail, we should check the return value. Fixes: 5ed540aecc2a ("iwlwifi: use mac80211 throughput trigger") Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: mvm: remove outdated comment referring to wake lockJohannes Berg
There's no multicast wake lock in the driver, remove the comment that refers to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: pcie: trace IOVA for iwlwifi_dev_tx_tbJohannes Berg
We trace the whole TFD with all TBs when in iwlwifi_dev_tx, but sometimes we add TBs to it later and then we don't have any of this data. Trace the I/O virtual address (IOVA) (it can be the physical address, or as returned by the IOMMU) here to aid debugging the DMA flows. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: dvm: excessive if in rs_bt_update_lq()Denis Efremov
There is no need to check 'priv->bt_ant_couple_ok' twice in rs_bt_update_lq(). The second check is always true. Thus, the expression can be simplified. Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: mvm: Report tx/rx antennasBen Greear
This makes it easier for user-space to know how many antennas the radio has. Seems to work with the AX200 radio, at least. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: pcie: rx: use rxq queue_size instead of constantJohannes Berg
This is a little less efficient now as it's known to be a multiqueue device in this function, but a future patch will have to use a variable here anyway, so use rxq->queue_size now instead to make it clearer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: mvm: remove left-over non-functional email aliasJohannes Berg
This email alias (ilw@linux.intel.com) hasn't been functional for probably closer to a decade than not, remove it. It's not really clear to me how this ended up in new code though. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: config: remove max_rx_agg_sizeJohannes Berg
This field isn't set by any configuration, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: pcie: make some RX functions staticJohannes Berg
These aren't used outside the rx.c file, so make them static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: scan: support scan req FW API ver 13Tova Mussai
1. Modify channel config flags to be used for legacy bands channels as well, to indicate SSIDs elements from ssidIEsArray. 2. Add new general flag. 3. Remove ssidNum from probe params. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: pcie: fix support for transmitting SKBs with fraglistJohannes Berg
When the implementation of SKBs with fraglist was sent upstream, a merge-damage occurred and half the patch was not applied. This causes problems in high-throughput situations with AX200 devices, including low throughput and FW crashes. Introduce the part that was missing from the original patch. Fixes: 0044f1716c4d ("iwlwifi: pcie: support transmitting SKBs with fraglist") Cc: stable@vger.kernel.org # 4.20+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> [ This patch was created by me, but the original author of this code is Johannes, so his s-o-b is here and he's marked as the author of the patch. ] Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20rtl8xxxu: Remove set but not used variable 'vif','dev','len'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5396:24: warning: variable vif set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5397:17: warning: variable dev set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5400:6: warning: variable len set but not used [-Wunused-but-set-variable] They are introduced by commit e542e66b7c2e ("rtl8xxxu: add bluetooth co-existence support for single antenna"), but never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20brcmfmac: remove monitor interface when detachingRafał Miłecki
This fixes a minor WARNING in the cfg80211: [ 130.658034] ------------[ cut here ]------------ [ 130.662805] WARNING: CPU: 1 PID: 610 at net/wireless/core.c:954 wiphy_unregister+0xb4/0x198 [cfg80211] Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20brcmfmac: disable PCIe interrupts before bus resetRafał Miłecki
Keeping interrupts on could result in brcmfmac freeing some resources and then IRQ handlers trying to use them. That was obviously a straight path for crashing a kernel. Example: CPU0 CPU1 ---- ---- brcmf_pcie_reset brcmf_pcie_bus_console_read brcmf_detach ... brcmf_fweh_detach brcmf_proto_detach brcmf_pcie_isr_thread ... brcmf_proto_msgbuf_rx_trigger ... drvr->proto->pd brcmf_pcie_release_irq [ 363.789218] Unable to handle kernel NULL pointer dereference at virtual address 00000038 [ 363.797339] pgd = c0004000 [ 363.800050] [00000038] *pgd=00000000 [ 363.803635] Internal error: Oops: 17 [#1] SMP ARM (...) [ 364.029209] Backtrace: [ 364.031725] [<bf243838>] (brcmf_proto_msgbuf_rx_trigger [brcmfmac]) from [<bf2471dc>] (brcmf_pcie_isr_thread+0x228/0x274 [brcmfmac]) [ 364.043662] r7:00000001 r6:c8ca0000 r5:00010000 r4:c7b4f800 Fixes: 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: allows to enable/disable HCI link PS mechanismYan-Hsuan Chuang
Different interfaces have its own link-related power save mechanism. Such as PCI can enter L1 state based on the traffic on the link, and sometimes driver needs to enable/disable it to avoid some issues, like throughput degrade when PCI trying to enter L1 state even if driver is having heavy traffic. For now, rtw88 only supports PCIE chips, and they just need to disable ASPM L1 when driver is not in power save mode, such as IPS and LPS. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: enable CLKREQ function if host supports itYan-Hsuan Chuang
By Realtek's design, there are two HW modules associated for CLKREQ, one is responsible to follow the PCIE host settings, and another is to actually working on it. But the module that is actually working on it is default disabled, and driver should enable that module if host and device have successfully sync'ed with each other. The module is default disabled because sometimes the host does not support it, and if there is any incorrect settings (ex. CLKREQ# is not Bi-Direction), device can be lost and disconnected to the host. So driver should first check after host and device are sync'ed, and the host does support the function and set it in configuration space, then driver can turn on the HW module to working on it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: use for loop instead of while loop for DBI/MDIOYan-Hsuan Chuang
Use a for loop to polling DBI/MDIO read/write flags to avoid infinite loop happens Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtw88: pci: use macros to access PCI DBI/MDIO registersYan-Hsuan Chuang
Add some register and bit macros to access DBI/MDIO register. This should not change the logic. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: process HE capabilities requestsMikhail Karpenko
Pass HE interface type data requests between firmware and driver. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: add TLV for extension IEsMikhail Karpenko
Extension information elements have additional field for ID. This commit adds TLV for such elements and a structure for interface HE capabilities communication with firmware. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: signal that all packets coming from device are already floodedIgor Mitsyanko
Firmware floods all packets that need to be flooded (multicast, broadcast, unknown unicast) as required. Tell kernel bridge subsystem it does not need to flood packet itself by marking each incoming frame with skb->offload_fwd_mark flag. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: advertise netdev port parent IDIgor Mitsyanko
Use MAC address of the first active radio as a unique device ID. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: add interface ID to each packetIgor Mitsyanko
Add interface ID information to the tail of each transmitted packet so that firmware can know to which interface the packet belongs to. This is only needed if device supports HW switch capability. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: track broadcast domain of each interfaceIgor Mitsyanko
If firmware reports that it supports hardware switch capabilities, driver needs to track and notify device whenever broadcast domain of a particular network device changes (ie. whenever it's upper master device changes). Firmware needs a unique ID to tell broadcast domains from each other which is an opaque number otherwise. For that purpose we can use netspace:ifidx pair to uniquely identify each broadcast domain: - if netdev is not part of a bridge, then use it's own ifidx as a broadcast domain ID - if netdev is part of a bridge, then use bridge netdev ifidx as broadcast domain ID Firmware makes sure that packets are only forwarded between interfaces marked with the same broadcast domain ID. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20qtnfmac: remove VIF in firmware in case of errorIgor Mitsyanko
Currently in case of error when registering network device with the kernel, we won't properly cleanup VIF state in firmware due to DEL_VIF command will not be send to wifi card. Make sure it does. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtlwifi: set proper udelay within rf_serial_readPing-Ke Shih
Since read RF register is an indirect access that hardware needs time to accomplish read action, but there's no ready bit, so delay is required to guarantee the read value is correct. After investigating internal documents, these delays are reduced as proper values. Reported-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtlwifi: rf_lock use non-irqsave spin_lockPing-Ke Shih
rf_lock is used to protect RF register access, but they will not called from interrupt context, so *_irqsave version isn't necessary. Then, these delays don't affect IRQ services. The old code holds spin_lock_irqsave() that will be detected a long delay as below: kworker/-276 4d... 0us : _raw_spin_lock_irqsave kworker/-276 4d... 0us : rtl8723_phy_rf_serial_read <-rtl8723de_phy_set_rf_reg kworker/-276 4d... 1us : rtl8723_phy_query_bb_reg <-rtl8723_phy_rf_serial_read kworker/-276 4d... 3us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read kworker/-276 4d... 4us : __const_udelay <-rtl8723_phy_rf_serial_read kworker/-276 4d... 4us!: delay_mwaitx <-rtl8723_phy_rf_serial_read kworker/-276 4d... 1004us : rtl8723_phy_set_bb_reg <-rtl8723_phy_rf_serial_read [...] Reported-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20ipw2x00: remove set but not used variable 'force_update'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/intel/ipw2x00/ipw2100.c: In function shim__set_security: drivers/net/wireless/intel/ipw2x00/ipw2100.c:5582:9: warning: variable force_update set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20ipw2x00: remove set but not used variable 'reason'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/intel/ipw2x00/ipw2200.c: In function ipw_wx_set_mlme: drivers/net/wireless/intel/ipw2x00/ipw2200.c:6805:9: warning: variable reason set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20brcmfmac: remove set but not used variable 'mpnum','nsp','nmp'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_get_regaddr: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:790:5: warning: variable mpnum set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_erom_scan: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:866:10: warning: variable nsp set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c: In function brcmf_chip_dmp_erom_scan: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:866:5: warning: variable nmp set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-19mdio_bus: Fix init if CONFIG_RESET_CONTROLLER=nGeert Uytterhoeven
Commit 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization to constant") accidentally changed a check from -ENOTSUPP to -ENOSYS, causing failures if reset controller support is not enabled. E.g. on r7s72100/rskrza1: sh-eth e8203000.ethernet: MDIO init failed: -524 sh-eth: probe of e8203000.ethernet failed with error -524 Seen on r8a7740/armadillo, r7s72100/rskrza1, and r7s9210/rza2mevb. Fixes: 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization to constant") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: YueHaibing <yuehaibing@huawei.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-19 19:29:24 +0000