| Age | Commit message (Collapse) | Author |
|---|
|
In ath12k_dp_tx(), memory allocated for extended skb is not freed
properly, causing a memory leak even when the host receives tx
completion for those skbs. Fix this issue by storing skb_ext_desc
in the host tx descriptor and using this skb_ext_desc field during
completion or during ath12k_dp_cc_cleanup().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250411060154.1388159-4-praneesh.p@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Current code uses mac_id and msdu parameters in ath12k_dp_tx_free_txbuf()
and ath12k_dp_tx_process_htt_tx_complete(). Since these parameters are
already encapsulated by struct ath12k_dp_tx_desc, passing them individually
results in redundant arguments.
Introduce struct ath12k_tx_desc_params to capture the skb, mac_id, and pass
it to the corresponding functions. Refactor these functions to use struct
ath12k_tx_desc_params instead, reducing the number of arguments and improving
function argument handling efficiency. Additionally, use struct
ath12k_tx_desc_params in ath12k_dp_tx_htt_tx_complete_buf() and
ath12k_dp_tx_complete_msdu(), which will be utilized for fetching extended skb
in a future patch.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250411060154.1388159-3-praneesh.p@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, in the case of extended skb allocation, the buffer is freed
before the DMA unmap operation. This premature deletion can result in
skb->data corruption, as the memory region could be re-allocated for other
purposes. Fix this issue by reordering the failure cases by calling
dma_unmap_single() first, then followed by the corresponding kfree_skb().
This helps avoid data corruption in case of failures in dp_tx().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250411060154.1388159-2-praneesh.p@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc3).
No conflicts. Adjacent changes:
tools/net/ynl/pyynl/ynl_gen_c.py
4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place")
7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The QDMA packet scheduler suffers from a performance issue.
Fix this by picking up changes from MediaTek's SDK which change to use
Token Bucket instead of Leaky Bucket and fix the SPEED_1000 configuration.
Fixes: 160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/18040f60f9e2f5855036b75b28c4332a2d2ebdd8.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
100Mbps
Without this patch, the maximum weight of the queue limit will be
incorrect when linked at 100Mbps due to an apparent typo.
Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/74111ba0bdb13743313999ed467ce564e8189006.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current method, the MDC divider was reset to the default setting
of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC
divider configuration function in mtk_hw_init() after reset.
Fixes: c0a440031d431 ("net: ethernet: mtk_eth_soc: set MDIO bus clock frequency")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/8ab7381447e6cdcb317d5b5a6ddd90a1734efcb0.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement support for basic ethtool functionality.
Note that ovpn is a virtual device driver, therefore
various ethtool APIs are just not meaningful and thus
not implemented.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-22-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Whenever a peer is deleted, send a notification to userspace so that it
can react accordingly.
This is most important when a peer is deleted due to ping timeout,
because it all happens in kernelspace and thus userspace has no direct
way to learn about it.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-21-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
IV wrap-around is cryptographically dangerous for a number of ciphers,
therefore kill the key and inform userspace (via netlink) should the
IV space go exhausted.
Userspace has two ways of deciding when the key has to be renewed before
exhausting the IV space:
1) time based approach:
after X seconds/minutes userspace generates a new key and sends it
to the kernel. This is based on guestimate and normally default
timer value works well.
2) packet count based approach:
after X packets/bytes userspace generates a new key and sends it to
the kernel. Userspace keeps track of the amount of traffic by
periodically polling GET_PEER and fetching the VPN/LINK stats.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-20-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change introduces the netlink commands needed to add, get, delete
and swap keys for a specific peer.
Userspace is expected to use these commands to create, inspect (non
sensitive data only), destroy and rotate session keys for a specific
peer.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-19-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change introduces the netlink command needed to add, delete and
retrieve/dump known peers. Userspace is expected to use these commands
to handle known peer lifecycles.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-18-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In case of UDP links, the local or remote endpoint used to communicate
with a given peer may change without a connection restart.
Add support for learning the new address in case of change.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-17-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
OpenVPN supports configuring a periodic keepalive packet.
message to allow the remote endpoint detect link failures.
This change implements the keepalive sending and timer expiring logic.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-16-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In a multi-peer scenario there are a number of situations when a
specific peer needs to be looked up.
We may want to lookup a peer by:
1. its ID
2. its VPN destination IP
3. its transport IP/port couple
For each of the above, there is a specific routing table referencing all
peers for fast look up.
Case 2. is a bit special in the sense that an outgoing packet may not be
sent to the peer VPN IP directly, but rather to a network behind it. For
this reason we first perform a nexthop lookup in the system routing
table and then we use the retrieved nexthop as peer search key.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-15-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With this change an ovpn instance will be able to stay connected to
multiple remote endpoints.
This functionality is strictly required when running ovpn on an
OpenVPN server.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-14-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Userspace may want to pass the MSG_NOSIGNAL flag to
tcp_sendmsg() in order to avoid generating a SIGPIPE.
To pass this flag down the TCP stack a new skb sending API
accepting a flags argument is introduced.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-13-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With this change ovpn is allowed to communicate to peers also via TCP.
Parsing of incoming messages is implemented through the strparser API.
Note that ovpn redefines sk_prot and sk_socket->ops for the TCP socket
used to communicate with the peer.
For this reason it needs to access inet6_stream_ops, which is declared
as extern in the IPv6 module, but it is not fully exported.
Therefore this patch is also adding EXPORT_SYMBOL_GPL(inet6_stream_ops)
to net/ipv6/af_inet6.c.
Cc: David Ahern <dsahern@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-11-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Byte/packet counters for in-tunnel and transport streams
are now initialized and updated as needed.
To be exported via netlink.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-10-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change implements encryption/decryption and
encapsulation/decapsulation of OpenVPN packets.
Support for generic crypto state is added along with
a wrapper for the AEAD crypto kernel API.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-9-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Packets received over the socket are forwarded to the user device.
Implementation is UDP only. TCP will be added by a later patch.
Note: no decryption/decapsulation exists yet, packets are forwarded as
they arrive without much processing.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-8-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Packets sent over the ovpn interface are processed and transmitted to the
connected peer, if any.
Implementation is UDP only. TCP will be added by a later patch.
Note: no crypto/encapsulation exists yet. Packets are just captured and
sent.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-7-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This specific structure is used in the ovpn kernel module
to wrap and carry around a standard kernel socket.
ovpn takes ownership of passed sockets and therefore an ovpn
specific objects is attached to them for status tracking
purposes.
Initially only UDP support is introduced. TCP will come in a later
patch.
Cc: willemdebruijn.kernel@gmail.com
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-6-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
An ovpn_peer object holds the whole status of a remote peer
(regardless whether it is a server or a client).
This includes status for crypto, tx/rx buffers, napi, etc.
Only support for one peer is introduced (P2P mode).
Multi peer support is introduced with a later patch.
Along with the ovpn_peer, also the ovpn_bind object is introcued
as the two are strictly related.
An ovpn_bind object wraps a sockaddr representing the local
coordinates being used to talk to a specific peer.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-5-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
An ovpn interface configured in MP mode will keep carrier always
on and let the user decide when to bring it administratively up and
down.
This way a MP node (i.e. a server) will keep its interface always
up and running, even when no peer is connected.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-4-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add basic infrastructure for handling ovpn interfaces.
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-3-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit introduces basic netlink support with family
registration/unregistration functionalities and stub pre/post-doit.
More importantly it introduces the YAML uAPI description along
with its auto-generated files:
- include/uapi/linux/ovpn.h
- drivers/net/ovpn/netlink-gen.c
- drivers/net/ovpn/netlink-gen.h
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-2-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
OpenVPN is a userspace software existing since around 2005 that allows
users to create secure tunnels.
So far OpenVPN has implemented all operations in userspace, which
implies several back and forth between kernel and user land in order to
process packets (encapsulate/decapsulate, encrypt/decrypt, rerouting..).
With `ovpn` we intend to move the fast path (data channel) entirely
in kernel space and thus improve user measured throughput over the
tunnel.
`ovpn` is implemented as a simple virtual network device driver, that
can be manipulated by means of the standard RTNL APIs. A device of kind
`ovpn` allows only IPv4/6 traffic and can be of type:
* P2P (peer-to-peer): any packet sent over the interface will be
encapsulated and transmitted to the other side (typical OpenVPN
client or peer-to-peer behaviour);
* P2MP (point-to-multipoint): packets sent over the interface are
transmitted to peers based on existing routes (typical OpenVPN
server behaviour).
After the interface has been created, OpenVPN in userspace can
configure it using a new Netlink API. Specifically it is possible
to manage peers and their keys.
The OpenVPN control channel is multiplexed over the same transport
socket by means of OP codes. Anything that is not DATA_V2 (OpenVPN
OP code for data traffic) is sent to userspace and handled there.
This way the `ovpn` codebase is kept as compact as possible while
focusing on handling data traffic only (fast path).
Any OpenVPN control feature (like cipher negotiation, TLS handshake,
rekeying, etc.) is still fully handled by the userspace process.
When userspace establishes a new connection with a peer, it first
performs the handshake and then passes the socket to the `ovpn` kernel
module, which takes ownership. From this moment on `ovpn` will handle
data traffic for the new peer.
When control packets are received on the link, they are forwarded to
userspace through the same transport socket they were received on, as
userspace is still listening to them.
Some events (like peer deletion) are sent to a Netlink multicast group.
Although it wasn't easy to convince the community, `ovpn` implements
only a limited number of the data-channel features supported by the
userspace program.
Each feature that made it to `ovpn` was attentively vetted to
avoid carrying too much legacy along with us (and to give a clear cut to
old and probalby-not-so-useful features).
Notably, only encryption using AEAD ciphers (specifically
ChaCha20Poly1305 and AES-GCM) was implemented. Supporting any other
cipher out there was not deemed useful.
Both UDP and TCP sockets are supported.
As explained above, in case of P2MP mode, OpenVPN will use the main system
routing table to decide which packet goes to which peer. This implies
that no routing table was re-implemented in the `ovpn` kernel module.
This kernel module can be enabled by selecting the CONFIG_OVPN entry
in the networking drivers section.
NOTE: this first patch introduces the very basic framework only.
Features are then added patch by patch, however, although each patch
will compile and possibly not break at runtime, only after having
applied the full set it is expected to see the ovpn module fully working.
Cc: steffen.klassert@secunet.com
Cc: antony.antony@secunet.com
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-1-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case.
Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
emac_xmit_xdp_frame()
There is an error check inside emac_xmit_xdp_frame() function which
is called when the driver wants to transmit XDP frame, to check if
the allocated tx descriptor is NULL, if true to exit and return
ICSSG_XDP_CONSUMED implying failure in transmission.
In this case trying to free a descriptor which is NULL will result
in kernel crash due to NULL pointer dereference. Fix this error handling
and increase netdev tx_dropped stats in the caller of this function
if the function returns ICSSG_XDP_CONSUMED.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During network interface initialization, the NIC driver needs to register
its Rx queue with the XDP, to ensure the incoming XDP buffer carries a
pointer reference to this info and is stored inside xdp_rxq_info.
While this struct isn't tied to XDP prog, if there are any changes in
Rx queue, the NIC driver needs to stop the Rx queue by unregistering
with XDP before purging and reallocating memory. Drop page_pool destroy
during Rx channel reset as this is already handled by XDP during
xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the
following warning:
warning logs: https://gist.github.com/MeghanaMalladiTI/eb627e5dc8de24e42d7d46572c13e576
Fixes: 46eeb90f03e0 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce tc matchall filter offload support in airoha_eth driver.
Matchall hw filter is used to implement hw rate policing via tc action
police:
$tc qdisc add dev eth0 handle ffff: ingress
$tc filter add dev eth0 parent ffff: matchall action police \
rate 100mbit burst 1000k drop
The current implementation supports just drop/accept as exceed/notexceed
actions. Moreover, rate and burst are the only supported configuration
parameters.
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250415-airoha-hw-rx-ratelimit-v4-1-03458784fbc3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In 'rtw8822c_dpk_cal_coef1()', do not ignore error returned
by 'check_hw_ready()' but issue a warning to denote possible
DPK issue. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5227c2ee453d ("rtw88: 8822c: add SW DPK support")
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250415090720.194048-1-dmantipov@yandex.ru
|
|
The rtw88-sdio do not work in AP mode due to the lack of TX status report
for management frames.
Make the invocation of rtw_sdio_indicate_tx_status unconditional and cover
all packet queues
Tested-on: rtl8723ds
Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
Signed-off-by: Zhen XIN <zhen.xin@nokia-sbell.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250410154217.1849977-2-zhen.xin@nokia-sbell.com
|
|
The rtw88-sdio do not work in AP mode due to the lack of TX status report
for management frames.
Map the management frames to queue TX_DESC_QSEL_MGMT, which enables the
chip to generate TX reports for these frames
Tested-on: rtl8723ds
Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
Signed-off-by: Zhen XIN <zhen.xin@nokia-sbell.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250410154217.1849977-3-zhen.xin@nokia-sbell.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ixgbe: Add basic devlink support
Jedrzej Jagielski says:
Create devlink specific directory for more convenient future feature
development.
Flashing and reloading are supported only by E610 devices.
Introduce basic FW/NVM validation since devlink reload introduces
possibility of runtime NVM update. Check FW API version, FW recovery
mode and FW rollback mode. Introduce minimal recovery probe to let
user to reload the faulty FW when recovery mode is detected.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbe: add support for FW rollback mode
ixgbe: add E610 implementation of FW recovery mode
ixgbe: add FW API version check
ixgbe: add support for devlink reload
ixgbe: add device flash update via devlink
ixgbe: extend .info_get() with stored versions
ixgbe: add E610 functions getting PBA and FW ver info
ixgbe: add .info_get extension specific for E610 devices
ixgbe: read the netlist version information
ixgbe: read the OROM version information
ixgbe: add E610 functions for acquiring flash data
ixgbe: add handler for devlink .info_get()
ixgbe: add initial devlink support
ixgbe: wrap netdev_priv() usage
devlink: add value check to devlink_info_version_put()
====================
Link: https://patch.msgid.link/20250415221301.1633933-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250415-nlmsg_v2-v1-8-a1c75d493fd7@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As we now have the plat_dat->init()/plat_dat->exit() populated which
have the required functionality on suspend/resume, we can now use
stmmac_pltfr_pm_ops which has methods that call these two functions.
Switch over to use this.
Doing so also fills in the runtime PM ops and _noirq variants as well.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u4jMo-000rCS-6f@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert sti to use the generic devm_stmmac_pltfr_probe() which will
call plat_dat->init()/plat_dat->exit() as appropriate, thus
simplifying the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u4jMj-000rCM-31@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the custom IS_PHY_IF_MODE_RGMII() macro with our generic
phy_interface_mode_is_rgmii() inline function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u4jMd-000rCG-VU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix smatch warning for uninitialised val in .phy_led_polarity_set for
AN7581 driver.
Correctly init to 0 to set polarity high by default.
Reported-by: Simon Horman <horms@kernel.org>
Fixes: 6a325aed130b ("net: phy: mediatek: add Airoha PHY ID to SoC driver")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250415105313.3409-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using stmmac_pltfr_probe() simplifies the probe function. This will not
only call plat_dat->init (sun8i_dwmac_init), but also plat_dat->exit
(sun8i_dwmac_exit) appropriately if stmmac_dvr_probe() fails. This
results in an overall simplification of the glue driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://patch.msgid.link/E1u4dKb-000dV7-3B@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Phylink will already limit the MAC speed according to the interface,
so if 2500BASE-X is selected, the maximum speed will be 2.5G.
Similarly, if SGMII is selected, the maximum speed will be 1G.
It is, therefore, not necessary to set a speed limit. Remove setting
plat_dat->max_speed from this glue driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u4dIh-000dT5-Kt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, bnxt_en driver satisfies the requirements of the Device
memory TCP, which is HDS.
So, it implements rx-side Device memory TCP for bnxt_en driver.
It requires only converting the page API to netmem API.
`struct page` of agg rings are changed to `netmem_ref netmem` and
corresponding functions are changed to a variant of netmem API.
It also passes PP_FLAG_ALLOW_UNREADABLE_NETMEM flag to a parameter of
page_pool.
The netmem will be activated only when a user requests devmem TCP.
When netmem is activated, received data is unreadable and netmem is
disabled, received data is readable.
But drivers don't need to handle both cases because netmem core API will
handle it properly.
So, using proper netmem API is enough for drivers.
Device memory TCP can be tested with
tools/testing/selftests/drivers/net/hw/ncdevmem.
This is tested with BCM57504-N425G and firmware version 232.0.155.8/pkg
232.1.132.8.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: David Wei <dw@davidwei.uk>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250415052458.1260575-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver allocates ring elements using GFP_DMA flags. There is
no dependency from LAN743x hardware on memory allocation should be
in DMA_ZONE. Hence modifying the flags to use only GFP_ATOMIC. This
is consistent with other callers of lan743x_rx_init_ring_element().
Reported-by: Zhang, Liyin(CN) <Liyin.Zhang.CN@windriver.com>
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415044509.6695-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King reports that on the ZII dev rev B, deleting a bridge VLAN
from a user port fails with -ENOENT:
https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/
This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(),
which tries to find an MST entry in &chip->msts associated with the SID,
but fails and returns -ENOENT as such.
But we know that this chip does not support MST at all, so that is not
surprising. The question is why does the guard in mv88e6xxx_mst_put()
not exit early:
if (!sid)
return 0;
And the answer seems to be simple: the sid comes from vlan.sid which
supposedly was previously populated by mv88e6xxx_vtu_get().
But some chip->info->ops->vtu_getnext() implementations do not populate
vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case,
later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is
just residual stack memory.
Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge
VLAN mapped to the default MSTI. For some chips, SID 0 is valid and
installed by mv88e6xxx_stu_setup(). A chip which does not support the
STU would implicitly only support mapping all VLANs to the default MSTI,
so although SID 0 is not valid, it would be sufficient, if we were to
zero-initialize the vlan structure, to fix the bug, due to the
coincidence that a test for vlan.sid == 0 already exists and leads to
the same (correct) behavior.
Another option which would be sufficient would be to add a test for
mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one
which already exists in mv88e6xxx_mst_get(). But that placement means
the caller will have to dereference vlan.sid, which means it will access
uninitialized memory, which is not nice even if it ignores it later.
So we end up making both modifications, in order to not rely just on the
sid == 0 coincidence, but also to avoid having uninitialized structure
fields which might get temporarily accessed.
Fixes: acaf4d2e36b3 ("net: dsa: mv88e6xxx: MST Offloading")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250414212913.2955253-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
registered
Russell King reports that a system with mv88e6xxx dereferences a NULL
pointer when unbinding this driver:
https://lore.kernel.org/netdev/Z_lRkMlTJ1KQ0kVX@shell.armlinux.org.uk/
The crash seems to be in devlink_region_destroy(), which is not NULL
tolerant but is given a NULL devlink global region pointer.
At least on some chips, some devlink regions are conditionally registered
since the blamed commit, see mv88e6xxx_setup_devlink_regions_global():
if (cond && !cond(chip))
continue;
These are MV88E6XXX_REGION_STU and MV88E6XXX_REGION_PVT. If the chip
does not have an STU or PVT, it should crash like this.
To fix the issue, avoid unregistering those regions which are NULL, i.e.
were skipped at mv88e6xxx_setup_devlink_regions_global() time.
Fixes: 836021a2d0e0 ("net: dsa: mv88e6xxx: Export cross-chip PVT as devlink region")
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250414212850.2953957-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When txgbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent
error paths after txgbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when txgbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 937d46ecc5f9 ("net: wangxun: add ethtool_ops for channel number")
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415032910.13139-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For STP to work, receiving BPDUs is essential, but the appropriate bit
was never set. Without GC_RX_BPDU_EN, the switch chip will filter all
BPDUs, even if an appropriate PVID VLAN was setup.
Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250414200434.194422-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the for loop used to allocate the loc_array and bmap for each port, a
memory leak is possible when the allocation for loc_array succeeds,
but the allocation for bmap fails. This is because when the control flow
goes to the label free_eth_finfo, only the allocations starting from
(i-1)th iteration are freed.
Fix that by freeing the loc_array in the bmap allocation error path.
Fixes: d915c299f1da ("cxgb4: add skeleton for ethtool n-tuple filters")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414170649.89156-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
