summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-05-06wifi: iwlwifi: cfg: remove duplicated iwl_cfg_glJohannes Berg
This really is the same device as covered by iwl_cfg_bz, just the discrete version. Since discrete vs integrated is handled in the transport config, there's no need to have both. Remove iwl_cfg_gl. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.fbb78183dc85.Ic5429009677ae1023cf1f43a655e90409a30c493@changeid
2025-05-06wifi: iwlwifi: cfg: remove iwl_ax201_cfg_qu_hrJohannes Berg
We can handle the name differently, so do that and remove the extra config entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.17fc47c72232.I2cb4476b9bca6e770bd375ad6ce650553dbde0f1@changeid
2025-05-06wifi: iwlwifi: cfg: remove max_tx_agg_sizeJohannes Berg
This was used in some really old devices, and then got carried forward to Qu devices, even though on those we don't need it at all since the TX aggregation start is offloaded to the firmware. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.9c2689e2ca8e.I8274b29ca64d9ef9d1e357bbe34ca3a4b97aeb7a@changeid
2025-05-06wifi: iwlwifi: cfg: remove unused config externsJohannes Berg
There are two killer configs that no longer exist, remove the externs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.64977630101f.I9997a72027d37249620a78091759fa44f9d32c87@changeid
2025-05-06wifi: iwlwifi: cfg: unify Killer 1650s/i with Qu/HrJohannes Berg
These configs are the same except for the name, but we can use a separate per-device name to override the name. So do that, and remove the separate configs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a0a8ebbd473a.Iad8bff04138538a8bc9f7920077ea24a699b1ed4@changeid
2025-05-06wifi: iwlwifi: cfg: unify Qu/QuZ configsJohannes Berg
Now that the fw_name_mac is no longer around and derived from the MAC type automatically, we no longer need to have different configurations for Qu/QuZ. Combine them. For the killer AX1650s/i, also fix the names, there was a mixup. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.957fbb5437ce.If51ad0b2c8afaaa131208125af3bc292793613bb@changeid
2025-05-06wifi: iwlwifi: cfg: remove fw_name_macJohannes Berg
Instead of having fw_name_mac in the config, derive it from the MAC type instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.8dba9a2d3546.I41fa594d6a0be163444b90c1ed4b441a949d3899@changeid
2025-05-06wifi: iwlwifi: tests: check for device namesJohannes Berg
Add a unit test that checks that each device has a name, either via the specific name entry or the config's name. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.c04287134280.Iedc7c05a41dc8bfe04dc8b95fea38543513eac2d@changeid
2025-05-06wifi: iwlwifi: pcie: add entry for Killer AX1650i on AdL-PJohannes Berg
On AdL-P, we're missing an entry for the Killer(R) Wi-Fi 6 AX1650i 160 MHz adapter. Add an entry to fix that. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219114 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.483214386aa4.Iad4d2041bfe544875fe9f5c051e23a765f862786@changeid
2025-05-06wifi: iwlwifi: unify some configurationsJohannes Berg
Rather than having individual entries for different MAC and RF steps, unify the entries by using fw_name_mac and remove the now duplicated ones. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.b93f34a65822.I57b8235acb675cb6b4e97df2f4a7365f3d9bff18@changeid
2025-05-06wifi: iwlwifi: remove duplicated lineMiri Korenblit
This line was duplicated by mistake, remove one occurrence. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a2601e0a08e0.Ie72fadec40e41b8197bfdae16eaa430c64a3e62d@changeid
2025-05-06wifi: iwlwifi: pcie: Add support for new device idsSomashekhar Puttagangaiah
Add device support for PeP on ScP Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a66928fcc82a.Icbbc7c28855f8de232cb3916901a4da3ac286117@changeid
2025-05-06wifi: iwlwifi: remove TH/TH1 RF typesJohannes Berg
There are the same values as JF2/JF1 respectively, and that really matches the code names. Remove TH/TH1. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.7677cffdfae2.Idd76734c310cf5f27de43d24e71b27467ab5905a@changeid
2025-05-06wifi: iwlwifi: clean up config macroJohannes Berg
The IWL_DEV_INFO() macro has far too many arguments, and most of the time they're just "ANY". Use C99 initializers in the macro to clean that up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.42318bb31f0e.Ic3a40afcd182b6e1802bb8f8a1a845b20608e328@changeid
2025-05-06wifi: iwlwifi: mvm: remove nl80211 testmodeJohannes Berg
This was used in the past for NoA and/or beacon filter testing, but these days everything is tested via debugfs or special FW commands, so remove the testmode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.751018e0ed8e.I21557a9a3d57234187f1b0b2182a1714ecc66b9a@changeid
2025-05-06wifi: iwlwifi: mld: set rx_mpdu_cmd_hdr_sizeJohannes Berg
Set rx_mpdu_cmd_hdr_size so that tracing will correctly include the frame header. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.caf1d8e2bae3.I82d89bc8d128f78159a8a11b1573574dacdeb99e@changeid
2025-05-06wifi: iwlwifi: dvm: fix various W=1 warningsJohannes Berg
Fix warnings occurring with W=1, mostly const and one about pointer arithmetic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.3ef1e4f1cccb.Ic41d3f3721e8bd9df9cd50242232110c4a93e873@changeid
2025-05-06wifi: iwlwifi: mld: force the responder to use the full bandwidthAvraham Stern
When a soft AP is started, it may not use the full configured bandwidth (e.g. if no station is connected). As a result, the responder will not support the configured bandwidth. Since the responder supports ranging with unassociated stations, there is no indication to the driver when the full bandwidth should be enabled. Fix it by configuring the AP to always use the full bandwidth when a responder is supported. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.620fe8099fff.Id50675f4d4c524b0a7ee602c48af538a327010e0@changeid
2025-05-06wifi: iwlwifi: mld: start AP with the correct bandwidthAvraham Stern
When a channel context is added, it is still not assigned to the link and the link is not yet active. As a result, the channel context min_def is used when the AP is started, even when the full bandwidth should be used. Fix it by updating the PHY channel context when the link is already active so the full bandwidth is used when needed. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.30b043b10fb1.I62c2aa58687e4796b759fa68132122119a337b49@changeid
2025-05-06wifi: iwlwifi: mld: add monitor internal stationDaniel Gabay
This is needed for TX injection over monitor interface. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.5ec460d3f1c2.Ic8456efb4cdd722dcd9c4910a1569ef9d3e4e066@changeid
2025-05-06wifi: iwlwifi: mld: support for COMPRESSED_BA_RES_API_S_VER_7Emmanuel Grumbach
The rate format changed but since we don't use the rate, just claim support for this new API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.c4be90e242ff.Ie8a0f0d6320613bd8c5cb6c82a063069fffa3b67@changeid
2025-05-06wifi: iwlwifi: mvm: support iwl_mac_power_cmd version 2Miri Korenblit
This version fixes the issue that was worked around by iwl_mvm_smps_workaround. So for FWs with the new version don't do the workaround, and set new bit added in this version when appropriate. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.5c9a0181a84b.I9a03bc07a7b3f6e37cc1c0c1af5719e765a05897@changeid
2025-05-06wifi: iwlwifi: implement TOP resetJohannes Berg
Implement TOP reset (new in the SC family), which resets much of the (shared) hardware without resetting the bus interfaces. Use it to recover from TOP fatal error, or if manually used; we'll need to add using it for FSEQ updates later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.12f38024a3b4.I9c22f6c4f6de64f3b34ccd898370ec1859ab7dbf@changeid
2025-05-06Merge tag 'v6.15-rc5' into x86/msr, to pick up fixes and to resolve conflictsIngo Molnar
Conflicts: drivers/cpufreq/intel_pstate.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-05-06wifi: iwlwifi: mld: handle SW reset w/o NIC errorJohannes Berg
For the upcoming TOP reset, the sw_reset() method may be called without nic_error() before it. In this case, also abort any still pending scans and set in_hw_restart. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.b732ff4e9f31.I3948c2d892f1ee82b3a6bf9f123be02a1eaa82e5@changeid
2025-05-06wifi: iwlwifi: mvm: support ROC command version 6Miri Korenblit
This was suppsed to be supported only in iwlmld, but turns out that it will be needed also in iwlmvm. Add support for it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.d118ee63aca4.I12ea349ca6587d8ea606f6ece4a9f3c0c2bb1494@changeid
2025-05-06wifi: iwlwifi: mld: support iwl_mac_power_cmd version 2Miri Korenblit
This version fixes the issue that was worked around by iwl_mld_smps_wa. So for FWs with the new version don't do the workaround, and set new bit added in this version when appropriate. While at it, rename iwl_mld_smps_wa to iwl_mld_smps_workaround. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.77fdb18d1ee0.I93688612ac4f6ec99da9bc54bee16554ef40a40b@changeid
2025-05-06wifi: iwlwifi: add support for ALIVE v8Emmanuel Grumbach
The firmware added a field to describe the platform Id. Just print it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.dc387ae36e0f.Iafd364c6b23749597b658015be97295ad0c1730d@changeid
2025-05-06wifi: iwlwifi: mld: add kunit test for emlsr with bt onSomashekhar Puttagangaiah
add kunit test to validate entering and exiting emlsr scenarios when the bt is on with certain penalty on wifi. Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.6621494fa412.If89b4b2dab308d825ca02284dd8e0030675d7af5@changeid
2025-05-06wifi: iwlwifi: fw: support PPAG command version 7Pagadala Yesu Anjaneyulu
PPAG command version 7 will send exact data read from BIOS to firmware without filtering/altering BIOS data. This enables the driver to become purely a pipe for this feature. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.88ed7b2cadef.Iad78f6cec617d1f111b704352795dde81af71a99@changeid
2025-05-06wifi: iwlwifi: fw: support reading PPAG BIOS table revision 4Pagadala Yesu Anjaneyulu
PPAG revision 4 data has more supported bits than supported in version 6 of PPAG command. So, adjust by masking accordingly to firmware acceptance. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.f1cb31f9f6ab.I56d6887866f76fd02b2cd298e3de1189c6d3890e@changeid
2025-05-06wifi: iwlwifi: rename ppag_ver to ppag_bios_revPagadala Yesu Anjaneyulu
ppag_ver variable is holding PPAG BIOS revision but name misleading as PPAG command API version, So rename to ppag_bios_rev. This will improve code readability but doesn't alter behaviour. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.be51850947df.If81d88cd2d38299faf1e2a3db5efbc021650f907@changeid
2025-05-06wifi: iwlwifi: mld: don't return an error if the FW is deadMiri Korenblit
If iwl_mld_change_vif_links failed to add the requested link(s) because the FW is dead (error before recovery), there is no point in returning an error value, as the reconfig will re-add the link(s) after the FW is started. Return 0 in that case, and WARN in the others. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250430151952.c549c72b1f37.I445bf723e9befc9541b4abd0ec7c72db8f1ff177@changeid
2025-05-06wifi: iwlwifi: mld: check for NULL before referencing a pointerMiri Korenblit
Errors can happen, and it is better not to risk with a NULL pointer dereference. Make sure that the links-to-remove pointers are not NULL before dereferencing it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250430151952.408652d45cda.I1bb72836dab17895a2e39910e4493d667db0fa80@changeid
2025-05-06wifi: iwlwifi: mld: allow EMLSR with 2.4 GHz when BT is ONSomashekhar Puttagangaiah
When BT is ON, EMLSR with one of the links operating on 2.4 GHz is allowed only if it meets following conditions. In this patch: 1. during link selection, when BT is ON, allow emlsr only if BT pentalty is < 7%. 2. exit EMLSR if BT is turned ON and one of the links is operating on 2.4 GHz with BT penalty > 7% Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.d30212ec3901.I48e3d5bd6b0b8583f98057c38d2ee30fff5abd8a@changeid
2025-05-06wifi: iwlwifi: implement TOP reset followerJohannes Berg
For the upcoming SC hardware, a new reset mode "(silent) TOP reset" will be available. When BT initiates that reset, it'll negotiate with the WiFi firmware which makes it appear to the driver as the reset interrupt. To distinguish it from all the other reasons for the reset interrupt, there's (now) a status field in CSR 0x110. Implement the part of TOP reset where we react to BT doing it. This requires disambiguating the interrupt, depending on the state of the device, since we can even get TOP reset from BT while waiting for the reset handshake. If TOP reset is done by BT while we're not trying to do reset anyway, then simply reprobe, since we cannot keep the state of the device as it's being reset, after waiting the needed 180ms to let the device reset/settle. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.fb86bfbdca40.Ibe40bf54003e3f8929b671324a395e76eb64a4d8@changeid
2025-05-06wifi: iwlwifi: avoid scheduling restart during restartJohannes Berg
When a restart is in progress, it can be async due to the next worker being scheduled in mac80211 (restart work) or the driver itself (reprobe). Avoid scheduling another restart during this period. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.db428503ec3c.I3f2be3d72a9d40cfb4e697cdab1cd2866a9262bc@changeid
2025-05-06wifi: iwlwifi: mld: tests: extend link pair testsJohannes Berg
Generalize and extend the link pair tests to not just do channel load checks, but generally check link pairs. To enable more accurate checking, return the reasons bitmap from iwl_mld_valid_emlsr_pair() and therefore rename it to iwl_mld_emlsr_pair_state. It's also necessary now to add more chandefs, and while doing so fix the existing ones to be valid and add a test to check they really are valid. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.1f7c4ac75c6d.I69d68359e02d99632e95daba3d126115dce167b3@changeid
2025-05-06wifi: iwlwifi: mld: refactor tests to use chandefsJohannes Berg
Instead of building invalid chandefs on the fly, use only chandefs throughout and ensure those are valid. Also add more chandefs that will be needed for new tests. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.6643fa8773f1.I644e9053d222a772e1d109799c4bfa0677add4d7@changeid
2025-05-06wifi: iwlwifi: mld: send the WPFC table to the FWMiri Korenblit
Read the table on op mode start, and send it to the FW when it is loaded. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.e349a33cd871.Ied196cf0fbe18b82b87ce713c4e3347f9aca1c25@changeid
2025-05-06wifi: iwlwifi: read WPFC also from UEFIMiri Korenblit
We are currently reading it only from ACPI, but we need to read it from UEFI too (if exists, and if the UEFI variables are locked) Add the reading from the UEFI and use IWL_BIOS_TABLE_LOADER to generate the code that determines the source from which the table should be read (ACPI/UEFI). Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.839a5e7dd89b.I491acbf68047874df97b3971f1ba692ebc998a52@changeid
2025-05-06wifi: iwlwifi: prepare for reading WPFC from UEFIMiri Korenblit
IWL_BIOS_TABLE_LOADER generates the code that determines from what source to read a BIOS table (ACPI or UEFI). As we want to read WPFC from UEFI to, iwl_acpi_get_phy_filters needs to have the prototype that is required by this macro: receive fwrt and return a int on success/failure. Do that. This allowes us to make to version of iwl_acpi_get_phy_filters for non ACPI builds back to an iniline function. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Link: https://patch.msgid.link/20250430151952.8046a2db775b.Ifbcf4168183d3cd635e3e800ec7ecd903e57d361@changeid
2025-05-06wifi: iwlwifi: Add short description to enum iwl_power_schemeJeff Johnson
The kernel-doc script flagged the following: drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:130: warning: missing initial short description on line: * enum iwl_power_scheme 1 warnings as Errors Add a short description to address this warning. Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250319-iwl_power_scheme-kdoc-v1-1-2033ae38b178@oss.qualcomm.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-06can: mcan: m_can_class_unregister(): fix order of unregistration callsMarc Kleine-Budde
If a driver is removed, the driver framework invokes the driver's remove callback. A CAN driver's remove function calls unregister_candev(), which calls net_device_ops::ndo_stop further down in the call stack for interfaces which are in the "up" state. The removal of the module causes a warning, as can_rx_offload_del() deletes the NAPI, while it is still active, because the interface is still up. To fix the warning, first unregister the network interface, which calls net_device_ops::ndo_stop, which disables the NAPI, and then call can_rx_offload_del(). Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-3-59a9b131589d@pengutronix.de Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: rockchip_canfd: rkcanfd_remove(): fix order of unregistration callsMarc Kleine-Budde
If a driver is removed, the driver framework invokes the driver's remove callback. A CAN driver's remove function calls unregister_candev(), which calls net_device_ops::ndo_stop further down in the call stack for interfaces which are in the "up" state. The removal of the module causes a warning, as can_rx_offload_del() deletes the NAPI, while it is still active, because the interface is still up. To fix the warning, first unregister the network interface, which calls net_device_ops::ndo_stop, which disables the NAPI, and then call can_rx_offload_del(). Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-2-59a9b131589d@pengutronix.de Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: mcp251xfd: mcp251xfd_remove(): fix order of unregistration callsMarc Kleine-Budde
If a driver is removed, the driver framework invokes the driver's remove callback. A CAN driver's remove function calls unregister_candev(), which calls net_device_ops::ndo_stop further down in the call stack for interfaces which are in the "up" state. With the mcp251xfd driver the removal of the module causes the following warning: | WARNING: CPU: 0 PID: 352 at net/core/dev.c:7342 __netif_napi_del_locked+0xc8/0xd8 as can_rx_offload_del() deletes the NAPI, while it is still active, because the interface is still up. To fix the warning, first unregister the network interface, which calls net_device_ops::ndo_stop, which disables the NAPI, and then call can_rx_offload_del(). Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-1-59a9b131589d@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: mcp251xfd: fix TDC setting for low data bit ratesKelsey Maes
The TDC is currently hardcoded enabled. This means that even for lower CAN-FD data bitrates (with a DBRP (data bitrate prescaler) > 2) a TDC is configured. This leads to a bus-off condition. ISO 11898-1 section 11.3.3 says "Transmitter delay compensation" (TDC) is only applicable if DBRP is 1 or 2. To fix the problem, switch the driver to use the TDC calculation provided by the CAN driver framework (which respects ISO 11898-1 section 11.3.3). This has the positive side effect that userspace can control TDC as needed. Demonstration of the feature in action: | $ ip link set can0 up type can bitrate 125000 dbitrate 500000 fd on | $ ip -details link show can0 | 3: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UP mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can <FD> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0 | bitrate 125000 sample-point 0.875 | tq 50 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 10 brp 2 | mcp251xfd: tseg1 2..256 tseg2 1..128 sjw 1..128 brp 1..256 brp_inc 1 | dbitrate 500000 dsample-point 0.875 | dtq 125 dprop-seg 6 dphase-seg1 7 dphase-seg2 2 dsjw 1 dbrp 5 | mcp251xfd: dtseg1 1..32 dtseg2 1..16 dsjw 1..16 dbrp 1..256 dbrp_inc 1 | tdcv 0..63 tdco 0..63 | clock 40000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536 parentbus spi parentdev spi0.0 | $ ip link set can0 up type can bitrate 1000000 dbitrate 4000000 fd on | $ ip -details link show can0 | 3: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UP mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can <FD,TDC-AUTO> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0 | bitrate 1000000 sample-point 0.750 | tq 25 prop-seg 14 phase-seg1 15 phase-seg2 10 sjw 5 brp 1 | mcp251xfd: tseg1 2..256 tseg2 1..128 sjw 1..128 brp 1..256 brp_inc 1 | dbitrate 4000000 dsample-point 0.700 | dtq 25 dprop-seg 3 dphase-seg1 3 dphase-seg2 3 dsjw 1 dbrp 1 | tdco 7 | mcp251xfd: dtseg1 1..32 dtseg2 1..16 dsjw 1..16 dbrp 1..256 dbrp_inc 1 | tdcv 0..63 tdco 0..63 | clock 40000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536 parentbus spi parentdev spi0.0 There has been some confusion about the MCP2518FD using a relative or absolute TDCO due to the datasheet specifying a range of [-64,63]. I have a custom board with a 40 MHz clock and an estimated loop delay of 100 to 216 ns. During testing at a data bit rate of 4 Mbit/s I found that using can_get_relative_tdco() resulted in bus-off errors. The final TDCO value was 1 which corresponds to a 10% SSP in an absolute configuration. This behavior is expected if the TDCO value is really absolute and not relative. Using priv->can.tdc.tdco instead results in a final TDCO of 8, setting the SSP at exactly 80%. This configuration works. The automatic, manual, and off TDC modes were tested at speeds up to, and including, 8 Mbit/s on real hardware and behave as expected. Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reported-by: Kelsey Maes <kelsey@vpprocess.com> Closes: https://lore.kernel.org/all/C2121586-C87F-4B23-A933-845362C29CA1@vpprocess.com Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Kelsey Maes <kelsey@vpprocess.com> Link: https://patch.msgid.link/20250430161501.79370-1-kelsey@vpprocess.com [mkl: add comment] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probeAntonios Salios
The spin lock tx_handling_spinlock in struct m_can_classdev is not being initialized. This leads the following spinlock bad magic complaint from the kernel, eg. when trying to send CAN frames with cansend from can-utils: | BUG: spinlock bad magic on CPU#0, cansend/95 | lock: 0xff60000002ec1010, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 | CPU: 0 UID: 0 PID: 95 Comm: cansend Not tainted 6.15.0-rc3-00032-ga79be02bba5c #5 NONE | Hardware name: MachineWare SIM-V (DT) | Call Trace: | [<ffffffff800133e0>] dump_backtrace+0x1c/0x24 | [<ffffffff800022f2>] show_stack+0x28/0x34 | [<ffffffff8000de3e>] dump_stack_lvl+0x4a/0x68 | [<ffffffff8000de70>] dump_stack+0x14/0x1c | [<ffffffff80003134>] spin_dump+0x62/0x6e | [<ffffffff800883ba>] do_raw_spin_lock+0xd0/0x142 | [<ffffffff807a6fcc>] _raw_spin_lock_irqsave+0x20/0x2c | [<ffffffff80536dba>] m_can_start_xmit+0x90/0x34a | [<ffffffff806148b0>] dev_hard_start_xmit+0xa6/0xee | [<ffffffff8065b730>] sch_direct_xmit+0x114/0x292 | [<ffffffff80614e2a>] __dev_queue_xmit+0x3b0/0xaa8 | [<ffffffff8073b8fa>] can_send+0xc6/0x242 | [<ffffffff8073d1c0>] raw_sendmsg+0x1a8/0x36c | [<ffffffff805ebf06>] sock_write_iter+0x9a/0xee | [<ffffffff801d06ea>] vfs_write+0x184/0x3a6 | [<ffffffff801d0a88>] ksys_write+0xa0/0xc0 | [<ffffffff801d0abc>] __riscv_sys_write+0x14/0x1c | [<ffffffff8079ebf8>] do_trap_ecall_u+0x168/0x212 | [<ffffffff807a830a>] handle_exception+0x146/0x152 Initializing the spin lock in m_can_class_allocate_dev solves that problem. Fixes: 1fa80e23c150 ("can: m_can: Introduce a tx_fifo_in_flight counter") Signed-off-by: Antonios Salios <antonios@mwa.re> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250425111744.37604-2-antonios@mwa.re Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06net: ethernet: mtk_eth_soc: do not reset PSE when setting FEFrank Wunderlich
Remove redundant PSE reset. When setting FE register there is no need to reset PSE, doing so may cause FE to work abnormal. Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/3a5223473e086a4b54a2b9a44df7d9ddcc2bc75a Fixes: dee4dd10c79aa ("net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://patch.msgid.link/18f0ac7d83f82defa3342c11ef0d1362f6b81e88.1746406763.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-06net: ethernet: mtk_eth_soc: reset all TX queues on DMA freeDaniel Golle
The purpose of resetting the TX queue is to reset the byte and packet count as well as to clear the software flow control XOFF bit. MediaTek developers pointed out that netdev_reset_queue would only resets queue 0 of the network device. Queues that are not reset may cause unexpected issues. Packets may stop being sent after reset and "transmit timeout" log may be displayed. Import fix from MediaTek's SDK to resolve this issue. Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/319c0d9905579a46dc448579f892f364f1f84818 Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/c9ff9adceac4f152239a0f65c397f13547639175.1746406763.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-18 05:38:07 +0000