summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/plda
AgeCommit message (Collapse)Author
2025-01-21PCI: microchip: Set inbound address translation for coherent or non-coherent ↵Daire McNamara
mode On Microchip PolarFire SoC the PCIe Root Port can be behind one of three general purpose Fabric Interface Controller (FIC) buses that encapsulates an AXI-S bus. Depending on which FIC(s) the Root Port is connected through to CPU space, and what address translation is done by that FIC, the Root Port driver's inbound address translation may vary. For all current supported designs and all future expected designs, inbound address translation done by a FIC on PolarFire SoC varies depending on whether PolarFire SoC is operating in coherent DMA mode or noncoherent DMA mode. The setup of the outbound address translation tables in the Root Port driver only needs to handle these two cases. Setup the inbound address translation tables to one of two address translations, depending on whether the Root Port is being used with coherent DMA or noncoherent DMA. Link: https://lore.kernel.org/r/20241011140043.1250030-3-daire.mcnamara@microchip.com Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver") Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> [bhelgaas: adapt for ac7f53b7e728 ("PCI: microchip: Add support for using either Root Port 1 or 2")] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2024-11-25Merge branch 'pci/controller/microchip'Bjorn Helgaas
- Add DT and driver support for using either of the two PolarFire Root Ports (Conor Dooley) * pci/controller/microchip: PCI: microchip: Add support for using either Root Port 1 or 2 dt-bindings: PCI: microchip,pcie-host: Add reg for Root Port 2
2024-11-25Merge branch 'pci/pm'Bjorn Helgaas
- Enable starfive controller runtime PM before probing host bridge (Mayank Rana) - Enable runtime power management for host bridges (Krishna chaitanya chundru) * pci/pm: PCI: Enable runtime PM of the host bridge PCI: starfive: Enable controller runtime PM before probing host bridge
2024-11-13PCI: starfive: Enable controller runtime PM before probing host bridgeMayank Rana
A PCI controller device, e.g., StarFive, is parent to PCI host bridge device. We must enable runtime PM of the controller before enabling runtime PM of the host bridge, which will happen in pci_host_probe(), to avoid this warning: pcie-starfive 940000000.pcie: Enabling runtime PM for inactive device with active children Fix this issue by enabling StarFive controller device's runtime PM before calling pci_host_probe() in plda_pcie_host_init(). Link: https://lore.kernel.org/r/20241111-runtime_pm-v7-1-9c164eefcd87@quicinc.com Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mayank Rana <quic_mrana@quicinc.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-11-07PCI: microchip: Add support for using either Root Port 1 or 2Conor Dooley
The PCI host controller on PolarFire SoC has multiple Root Port instances, each with their own bridge and ctrl address spaces. The original binding has an "apb" register region, and it is expected to be set to the base address of the Root Complex register space. Some defines in the Linux driver were used to compute the addresses of the bridge and ctrl address ranges corresponding to Root Port instance 1. Some customers want to use Root Port instance 2 however, which requires changing the defines in the driver, which is clearly not a portable solution. The binding has been changed from a single register region to a pair, corresponding to the bridge and ctrl regions respectively, so modify the driver to read these regions directly from the devicetree rather than compute them from the base address of the abp region. To maintain backwards compatibility with the existing binding, the driver retains code to handle the "abp" reg and computes the base address of the bridge and ctrl regions using the defines if it is present. reg-names has always been a required property, so this is safe to do. Link: https://lore.kernel.org/r/20241107-surrender-brisket-287d563a5de1@spud Signed-off-by: Conor Dooley <conor.dooley@microchip.com> [bhelgaas: Capitalize PCIe spec terms] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-10-03PCI: controller: Switch back to struct platform_driver::remove()Sergio Paracuellos
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all PCI controller drivers to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Link: https://lore.kernel.org/r/20240923065706.728769-1-sergio.paracuellos@gmail.com Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> [bhelgaas: add pcie-xilinx-nwl.c and tidy whitespace per Uwe Kleine-König: https://lore.kernel.org/r/tdxrmmqyzcufupnwkdbg7lwgadizm7v3lxjirykijbml7x54ze@upbdzycdsilm] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-29PCI: plda: Silence 'set affinity failed' warningMarek Vasut
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-10-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-05-28PCI: starfive: Add JH7110 PCIe controllerMinda Chen
Add StarFive JH7110 SoC PCIe controller platform driver code, JH7110 with PLDA host PCIe core. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-22-minda.chen@starfivetech.com Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
2024-05-28PCI: plda: Pass pci_host_bridge to plda_pcie_setup_iomems()Minda Chen
plda_pcie_setup_iomems() needs the bridge->windows list from struct pci_host_bridge and is currently used only by pcie-microchip-host.c. This driver uses pci_host_common_probe(), which sets a pci_host_bridge as the drvdata, so plda_pcie_setup_iomems() used platform_get_drvdata() to find the pci_host_bridge. But we also want to use plda_pcie_setup_iomems() in the new pcie-starfive.c driver, which does not use pci_host_common_probe() and will have struct starfive_jh7110_pcie as its drvdata, so pass the pci_host_bridge directly to plda_pcie_setup_iomems() so it doesn't need platform_get_drvdata() to find it. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-9-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: commit log, reorder to where this is needed] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: plda: Add host init/deinit and map bus functionsMinda Chen
Add PLDA host plda_pcie_host_init()/plda_pcie_host_deinit() and map bus function so vendors can use it to init PLDA PCIe host core. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-19-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
2024-05-28PCI: plda: Add event bitmap field to struct plda_pcie_rpMinda Chen
PLDA DMA interrupts are not all implemented, and the non-implemented interrupts should be masked. Add a bitmap field to mask the non-implemented interrupts. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-18-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-05-28PCI: microchip: Move IRQ functions to pcie-plda-host.cMinda Chen
Move IRQ related functions to common file pcie-plda-host.c The re-use code including MSI, INTx, event interrupts and IRQ init functions. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-17-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Add event irqchip field to host port and add PLDA irqchipMinda Chen
As the PLDA DT binding doc (Documentation/devicetree/bindings/pci/ plda,xpressrich3-axi-common.yaml) shows, PLDA PCIe contains an interrupt controller. Microchip PolarFire PCIe event IRQs include PLDA interrupts and PolarFire additional interrupts. The interrupt irqchip ops includes ack/mask/unmask interrupt ops, which will write correct registers. Microchip PolarFire PCIe additional interrupts require to write PolarFire SoC self-defined registers. So Microchip PCIe event irqchip ops can not be re-used. Microchip PolarFire PCIe additional interrupts (defined in drivers/pci/controller/plda/pcie-microchip-host.c): EVENT_PCIE_L2_EXIT EVENT_PCIE_HOTRST_EXIT EVENT_PCIE_DLUP_EXIT EVENT_SEC_TX_RAM_SEC_ERR EVENT_SEC_RX_RAM_SEC_ERR ... To support PLDA its own event IRQ process, implements PLDA irqchip ops and add event irqchip field to struct pcie_plda_rp. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240328091835.14797-16-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Add get_events() callback and PLDA get_event()Minda Chen
As PLDA DT binding doc (Documentation/devicetree/bindings/pci/ plda,xpressrich3-axi-common.yaml) showed, PLDA PCIe contains an interrupt controller. PolarFire implements its own PCIe interrupts, additional to the regular PCIe interrupts, due to lack of an MSI controller, so the interrupt to event number mapping is different to the PLDA regular interrupts, necessitating a custom get_events() implementation. Microchip PolarFire PCIe additional interrupts (defined in drivers/pci/controller/plda/pcie-microchip-host.c): EVENT_PCIE_L2_EXIT EVENT_PCIE_HOTRST_EXIT EVENT_PCIE_DLUP_EXIT EVENT_SEC_TX_RAM_SEC_ERR EVENT_SEC_RX_RAM_SEC_ERR ... plda_get_events() adds interrupt register to PLDA event num mapping codes. All the PLDA interrupts can be seen in new added graph. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240328091835.14797-15-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Add INTx and MSI event num to struct plda_eventMinda Chen
The INTx and MSI interrupt event num is different across platforms, so add two event num fields in struct plda_event. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-14-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Add request_event_irq() callback functionMinda Chen
As the PLDA DT binding doc (Documentation/devicetree/bindings/pci/ plda,xpressrich3-axi-common.yaml) shows, the PLDA IP contains an interrupt controller. Microchip PolarFire add some interrupts based on PLDA interrupt controller. The Microchip PolarFire PCIe additional interrupts (defined in drivers/pci/controller/plda/pcie-microchip-host.c): EVENT_PCIE_L2_EXIT EVENT_PCIE_HOTRST_EXIT EVENT_PCIE_DLUP_EXIT EVENT_SEC_TX_RAM_SEC_ERR EVENT_SEC_RX_RAM_SEC_ERR ... Both event_cause[] and mc_event_handler() contain additional interrupt symbol names; these can not be re-used. Add a new plda_event_handler() function, which implements PLDA interrupt defalt handler, and add a request_event_irq() callback function for Microchip PolarFire additional interrupts. [kwilczynski, bhelgaas: commit log] Link: https://lore.kernel.org/linux-pci/20240328091835.14797-13-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Add num_events field to struct plda_pcie_rpMinda Chen
The number of events is different across platforms. In order to share interrupt processing code, add a variable that defines the number of events so that it can be set per-platform instead of hardcoding it. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-12-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Rename interrupt related functionsMinda Chen
Rename mc_* to plda_* for IRQ functions and related IRQ domain ops data instances. MSI, INTx interrupt code and IRQ init code can all be re-used. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-11-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Move PLDA functions to pcie-plda-host.cMinda Chen
Move plda_pcie_setup_window() and plda_pcie_setup_iomems() to pcie-plda-host.c so they can be shared by all PLDA-based drivers. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-10-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Rename PLDA functions to be genericMinda Chen
Rename mc_pcie_setup_window() to plda_pcie_setup_window() and mc_pcie_setup_windows() to plda_pcie_setup_iomems() so they can be shared by all PLDA-based drivers. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-8-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Move PLDA structures to plda-pcie.hMinda Chen
Move the PLDA generic data structures to a header file so they can be re-used by all PLDA-based drivers. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240328091835.14797-7-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Rename PLDA structures to be genericMinda Chen
Rename struct mc_msi to plda_msi and move most of struct mc_pcie to a new struct plda_pcie_rp so they can be shared by all PLDA-based drivers. The axi_base_addr field remains in struct mc_pcie since it's Microchip-specific data. The event interrupt code is still using struct mc_pcie because the event interrupt code can not be re-used. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240328091835.14797-6-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Add bridge_addr field to struct mc_pcieMinda Chen
Bridge address base is common PLDA field, add this to struct mc_pcie first. INTx and MSI interrupt code will be changed to common code, so get the bridge base address from port->bridge_addr instead of axi_base_addr. The axi_base_addr is Microchip-specific data. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-5-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Move PLDA IP register macros to pcie-plda.hMinda Chen
Move PLDA PCIe host controller IP registers macros to pcie-plda.h, including bridge registers and PLDA IRQ event number. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-4-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-28PCI: microchip: Move pcie-microchip-host.c to PLDA directoryMinda Chen
Since Microchip PolarFire PCIe host is PLDA XpressRich IP, move to PLDA directory. Prepare for refactoring the codes. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240328091835.14797-3-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
generated by cgit (git 2.34.1) at 2025-07-15 22:36:47 +0000