summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2019-10-15PCI/ATS: Disable PF/VF ATS service independentlyKuppuswamy Sathyanarayanan
Previously we didn't disable the PF ATS until all associated VFs had disabled it. But per PCIe spec r5.0, sec 9.3.7.8, the ATS Capability in VFs and associated PFs may be enabled independently. Leaving ATS enabled in the PF unnecessarily may have power and performance impacts. Remove this dependency logic in the ATS enable/disable code. [bhelgaas: commit log] Suggested-by: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/8163ab8fa66afd2cba514ae95d29ab12104781aa.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-4-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <keith.busch@intel.com>
2019-10-15PCI/ATS: Handle sharing of PF PASID Capability with all VFsKuppuswamy Sathyanarayanan
Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the PF PASID configuration is shared by its VFs. VFs must not implement their own PASID Capability. Since VFs don't have a PASID Capability, pci_enable_pasid() always failed, which caused IOMMU setup to fail. Update the PASID interfaces so for VFs they reflect the state of the PF PASID. [bhelgaas: rebase without pasid_cap caching, commit log] Suggested-by: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/8ba1ac192e4ac737508b6ac15002158e176bab91.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-3-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <keith.busch@intel.com>
2019-10-15PCI/ATS: Handle sharing of PF PRI Capability with all VFsKuppuswamy Sathyanarayanan
Per PCIe r5.0, sec 9.3.7.11, VFs must not implement the PRI Capability. If the PF implements PRI, it is shared by the VFs. Since VFs don't have a PRI Capability, pci_enable_pri() always failed, which caused IOMMU setup to fail. Update the PRI interfaces so for VFs they reflect the state of the PF PRI. [bhelgaas: rebase without pri_cap caching, commit log] Suggested-by: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/b971e31f8695980da8e4a7f93e3b6a3edba3edaa.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-2-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <keith.busch@intel.com>
2019-10-15PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRIBjorn Helgaas
pci_prg_resp_pasid_required() returns the value of the "PRG Response PASID Required" bit from the PRI capability, but the interface was previously defined under #ifdef CONFIG_PCI_PASID. Move it from CONFIG_PCI_PASID to CONFIG_PCI_PRI so it's with the other PRI-related things. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2019-10-15PCI/ASPM: Add pcie_aspm_get_link()Heiner Kallweit
Factor out getting the link associated with a pci_dev and use this helper where appropriate. In addition this helper will be used in a subsequent patch of this series. Link: https://lore.kernel.org/r/19d33770-29de-a9af-4d85-f2b30269d383@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Allow re-enabling Clock PMHeiner Kallweit
Previously Clock PM could not be re-enabled after being disabled by pci_disable_link_state() because clkpm_capable was reset. Change this by adding a clkpm_disable field similar to aspm_disable. Link: https://lore.kernel.org/r/4e8a66db-7d53-4a66-c26c-f0037ffaa705@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Add L1 PM substate support to pci_disable_link_state()Heiner Kallweit
Add support for disabling states L1.1 and L1.2 to pci_disable_link_state(). Allow separate control of ASPM and PCI PM L1 substates. Link: https://lore.kernel.org/r/d81f8036-c236-6463-48e7-ebcdcda85bba@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Remove pcie_aspm_enabled() unnecessary lockingBjorn Helgaas
The lifetime of the link_state structure (bridge->link_state) is not the same as the lifetime of "bridge" itself. The link_state is allocated by pcie_aspm_init_link_state() after children of the bridge have been enumerated, and it is deallocated by pcie_aspm_exit_link_state() after all children of the bridge (but not the bridge itself) have been removed. Previously pcie_aspm_enabled() acquired aspm_lock to ensure that link_state was not deallocated while we're looking at it. But the fact that the caller of pcie_aspm_enabled() holds a reference to @pdev means there's always at least one child of the bridge, which means link_state can't be deallocated. Remove the unnecessary locking in pcie_aspm_enabled(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-15PCI: dwc: Fix find_next_bit() usageNiklas Cassel
find_next_bit() takes a parameter of size long, and performs arithmetic that assumes that the argument is of size long. Therefore we cannot pass a u32, since this will cause find_next_bit() to read outside the stack buffer and will produce the following print: BUG: KASAN: stack-out-of-bounds in find_next_bit+0x38/0xb0 Fixes: 1b497e6493c4 ("PCI: dwc: Fix uninitialized variable in dw_handle_msi_irq()") Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-10-15PCI: mobiveil: Fix csr_read()/write() build issueKefeng Wang
RISCV has csr_read()/write() macros in arch/riscv/include/asm/csr.h. The same function naming is used in the PCI mobiveil driver thus causing build error. Rename csr_[read,write][l,] to mobiveil_csr_read()/write() to fix it. drivers/pci/controller/pcie-mobiveil.c:238:69: error: macro "csr_read" passed 3 arguments, but takes just 1 static u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size) drivers/pci/controller/pcie-mobiveil.c:253:80: error: macro "csr_write" passed 4 arguments, but takes just 2 static void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size) Fixes: bcbe0d9a8d93 ("PCI: mobiveil: Unify register accessors") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Minghuan Lian <Minghuan.Lian@nxp.com> Cc: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Cc: Andrew Murray <andrew.murray@arm.com>
2019-10-15PCI: endpoint: Cast the page number to phys_addr_tAlan Mikhak
Modify pci_epc_mem_alloc_addr() to cast the variable 'pageno' from type 'int' to 'phys_addr_t' before shifting left. This cast is needed to avoid treating bit 31 of 'pageno' as the sign bit which would otherwise get sign-extended to produce a negative value. When added to the base address of PCI memory space, the negative value would produce an invalid physical address which falls before the start of the PCI memory space. Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-15PCI: amlogic: meson: Add support for G12ANeil Armstrong
Add support for the Amlogic G12A SoC using a separate shared PHY. This adds support for fetching a PHY phandle and call the PHY init, reset and power on/off calls instead of writing in the PHY register or toggling the PHY reset line. The MIPI clock and the PHY memory resource are only required for the Amlogic AXG SoC PCIe PHY setup, thus these elements are ignored for the Amlogic G12A having a separate shared PHY. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-10-15PCI: amlogic: Fix probed clock namesNeil Armstrong
Fix the clock names used in the probe function according to the bindings. Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-10-15PCI: amlogic: Fix reset assertion via gpio descriptorRemi Pommarel
Normally asserting reset signal on gpio would be achieved with: gpiod_set_value_cansleep(reset_gpio, 1); Meson PCI driver set reset value to '0' instead of '1' as it takes into account the PERST# signal polarity. The polarity should be taken care in the device tree instead. This fixes the reset assertion meaning and moves out the polarity configuration in DT (please note that there is no DT currently using this driver). Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-15PCI: aardvark: Don't rely on jiffies while holding spinlockRemi Pommarel
advk_pcie_wait_pio() can be called while holding a spinlock (from pci_bus_read_config_dword()), then depends on jiffies in order to timeout while polling on PIO state registers. In the case the PIO transaction failed, the timeout will never happen and will also cause the cpu to stall. This decrements a variable and wait instead of using jiffies. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-15PCI: aardvark: Fix PCI_EXP_RTCTL register configurationRemi Pommarel
PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it should not modify other interrupts' mask. The ISR mask polarity was also inverted, when PCI_EXP_RTCTL_PMEIE is set PCIE_MSG_PM_PME_MASK mask bit should actually be cleared. Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-15PCI: aardvark: Wait for endpoint to be ready before training linkRemi Pommarel
When configuring pcie reset pin from gpio (e.g. initially set by u-boot) to pcie function this pin goes low for a brief moment asserting the PERST# signal. Thus connected device enters fundamental reset process and link configuration can only begin after a minimal 100ms delay (see [1]). Because the pin configuration comes from the "default" pinctrl it is implicitly configured before the probe callback is called: driver_probe_device() really_probe() ... pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset function and PERST# is asserted */ ... drv->probe() [1] "PCI Express Base Specification", REV. 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-14PCI: aardvark: Use LTSSM state to build link training flagRemi Pommarel
Aardvark's PCI_EXP_LNKSTA_LT flag in its link status register is not implemented and does not reflect the actual link training state (the flag is always set to 0). In order to support link re-training feature this flag has to be emulated. The Link Training and Status State Machine (LTSSM) flag in Aardvark LMI config register could be used as a link training indicator. Indeed if the LTSSM is in L0 or upper state then link training has completed (see [1]). Unfortunately because after asking a link retraining it takes a while for the LTSSM state to become less than 0x10 (due to L0s to recovery state transition delays), LTSSM can still be in L0 while link training has not finished yet. So this waits for link to be in recovery or lesser state before returning after asking for a link retrain. [1] "PCI Express Base Specification", REV. 4.0 PCI Express, February 19 2014, Table 4-14 Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Tested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-10-14PCI: Fix missing bridge dma_ranges resource list cleanupRob Herring
Commit e80a91ad302b ("PCI: Add dma_ranges window list") added a dma_ranges resource list, but failed to correctly free the list when devm_pci_alloc_host_bridge() is used. Only the iproc host bridge driver is using the dma_ranges list. Fixes: e80a91ad302b ("PCI: Add dma_ranges window list") Link: https://lore.kernel.org/r/20191008012325.25700-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Srinath Mannam <srinath.mannam@broadcom.com>
2019-10-04PCI: pciehp: Avoid returning prematurely from sysfs requestsLukas Wunner
A sysfs request to enable or disable a PCIe hotplug slot should not return before it has been carried out. That is sought to be achieved by waiting until the controller's "pending_events" have been cleared. However the IRQ thread pciehp_ist() clears the "pending_events" before it acts on them. If pciehp_sysfs_enable_slot() / _disable_slot() happen to check the "pending_events" after they have been cleared but while pciehp_ist() is still running, the functions may return prematurely with an incorrect return value. Fix by introducing an "ist_running" flag which must be false before a sysfs request is allowed to return. Fixes: 32a8cef274fe ("PCI: pciehp: Enable/disable exclusively from IRQ thread") Link: https://lore.kernel.org/linux-pci/1562226638-54134-1-git-send-email-wangxiongfeng2@huawei.com Link: https://lore.kernel.org/r/4174210466e27eb7e2243dd1d801d5f75baaffd8.1565345211.git.lukas@wunner.de Reported-and-tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.19+
2019-09-30PCI/switchtec: Read all 64 bits of part_event_bitmapLogan Gunthorpe
The part_event_bitmap register is 64 bits wide, so read it with ioread64() instead of the 32-bit ioread32(). Fixes: 52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver") Link: https://lore.kernel.org/r/20190910195833.3891-1-logang@deltatee.com Reported-by: Doug Meyer <dmeyer@gigaio.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.12+ Cc: Kelvin Cao <Kelvin.Cao@microchip.com>
2019-09-30PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removalBenjamin Herrenschmidt
pci_reassign_bridge_resources() can be called by pci_resize_resource() at runtime, it walks the PCI tree up and down, and it isn't currently protected against any changes or hotplug operation. Hold the pci_bus_sem to protect it. Link: https://lore.kernel.org/r/7339fd73ccaf58552737ab10008333fd9f7723f2.camel@kernel.crashing.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-28Merge branch 'next-lockdown' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-23Merge branch 'pci/trivial'Bjorn Helgaas
- Fix typos and whitespace errors (Bjorn Helgaas, Krzysztof Wilczynski) - Remove unnecessary "return" statements (Krzysztof Wilczynski) - Correct of_irq_parse_pci() function documentation (Lubomir Rintel) * pci/trivial: PCI: Remove unnecessary returns PCI: OF: Correct of_irq_parse_pci() documentation PCI: Fix typos and whitespace errors
2019-09-23Merge branch 'remotes/lorenzo/pci/vmd'Bjorn Helgaas
- Fix VMD config addressing to ignore starting bus offset (Jon Derrick) - Fix VMD shadow offset scratchpad address (Jon Derrick) * remotes/lorenzo/pci/vmd: PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets
2019-09-23Merge branch 'lorenzo/pci/tegra'Bjorn Helgaas
- Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak
2019-09-23Merge branch 'remotes/lorenzo/pci/mobiveil'Bjorn Helgaas
- Fix mobiveil inbound window CPU base address setup (Hou Zhiqiang) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Fix the CPU base address setup in inbound window
2019-09-23Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas
- Propagate regulator_get_optional() errors so callers can distinguish real errors from optional regulators that are absent (Thierry Reding) - Propagate devm_of_phy_get() errors so callers can distinguish real errors from optional PHYs that are absent (Thierry Reding) - Add Andrew Murray as PCI native driver reviewer (Lorenzo Pieralisi) * remotes/lorenzo/pci/misc: MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: iproc: Propagate errors for optional PHYs PCI: histb: Propagate errors for optional regulators PCI: armada8x: Propagate errors for optional PHYs PCI: imx6: Propagate errors for optional regulators PCI: exynos: Propagate errors for optional PHYs PCI: rockchip: Propagate errors for optional regulators
2019-09-23Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas
- Add mediatek support for MT7629 (Jianjun Wang) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Add controller support for MT7629 dt-bindings: PCI: Add support for MT7629
2019-09-23Merge branch 'remotes/lorenzo/pci/layerscape'Bjorn Helgaas
- Mark Layerscape endpoint BARs 2 and 4 as 64-bit (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP so EP/RC can be built separately (Xiaowei Bao) * remotes/lorenzo/pci/layerscape: PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver
2019-09-23Merge branch 'remotes/lorenzo/pci/imx'Bjorn Helgaas
- Reduce i.MX 6Quad DBI register length to avoid aborts from accessing invalid registers (Stefan Agner) * remotes/lorenzo/pci/imx: PCI: imx6: Limit DBI register length
2019-09-23Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas
- Fix Hyper-V use-after-free in pci_dev removal (Dexuan Cui) - Fix Hyper-V build error in non-sysfs config (Randy Dunlap) - Reallocate to avoid Hyper-V domain number collisions (Haiyang Zhang) - Use Hyper-V instance ID bytes 4-5 to reduce domain collisions (Haiyang Zhang) * remotes/lorenzo/pci/hv: PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers PCI: hv: Detect and fix Hyper-V PCI domain number collision PCI: pci-hyperv: Fix build errors on non-SYSFS config PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it
2019-09-23Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas
- Make kirin_dw_pcie_ops constant (Nishka Dasgupta) - Make DesignWare "num-lanes" property optional and remove from relevant DTs (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: arm64: dts: fsl: Remove num-lanes property from PCIe nodes ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes PCI: dwc: Return directly when num-lanes is not found dt-bindings: PCI: designware: Remove the num-lanes from Required properties PCI: kirin: Make structure kirin_dw_pcie_ops constant
2019-09-23Merge branch 'remotes/lorenzo/pci/al'Bjorn Helgaas
- Add driver for Amazon Annapurna Labs PCIe controller (Jonathan Chocron) - Disable MSI-X since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Disable VPD since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Add ACS quirk since Annapurna Labs doesn't support ACS but does provide some equivalent protections (Ali Saidi) * remotes/lorenzo/pci/al: PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID # Conflicts: # drivers/pci/quirks.c
2019-09-23Merge branch 'pci/resource'Bjorn Helgaas
- Convert pci_resource_to_user() to a weak function to remove HAVE_ARCH_PCI_RESOURCE_TO_USER #defines (Denis Efremov) - Use PCI_SRIOV_NUM_BARS for idiomatic loop structure (Denis Efremov) - Fix Resizable BAR size suspend/restore for 1MB BARs (Sumit Saxena) - Correct "pci=resource_alignment" example in documentation (Alexey Kardashevskiy) * pci/resource: PCI: Correct pci=resource_alignment parameter example PCI: Restore Resizable BAR size bits correctly for 1MB BARs PCI: Use PCI_SRIOV_NUM_BARS in loops instead of PCI_IOV_RESOURCE_END PCI: Convert pci_resource_to_user() to a weak function # Conflicts: # drivers/pci/pci.c
2019-09-23Merge branch 'pci/pciehp'Bjorn Helgaas
- Cleanup pciehp LED/indicator control with a new consolidated pciehp_set_indicators() interface that controls both Attention and Power Indicators (Denis Efremov) * pci/pciehp: PCI: pciehp: Refer to "Indicators" instead of "LEDs" in comments PCI: pciehp: Remove pciehp_green_led_{on,off,blink}() PCI: pciehp: Remove pciehp_set_attention_status() PCI: pciehp: Combine adjacent indicator updates PCI: pciehp: Add pciehp_set_indicators() to set both indicators
2019-09-23Merge branch 'pci/p2pdma'Bjorn Helgaas
- Move P2PCMA PCI bus offset from generic dev_pagemap to pci_p2pdma_pagemap (Logan Gunthorpe) - Add provider's pci_dev to pci_p2pdma_pagemap (Logan Gunthorpe) - Apply host bridge whitelist for ACS (Logan Gunthorpe) - Whitelist some Intel host bridges for P2PDMA (Logan Gunthorpe) - Add attrs to pci_p2pdma_map_sg() to match dma_map_sg() (Logan Gunthorpe) - Add pci_p2pdma_unmap_sg() (Logan Gunthorpe) - Store P2PDMA mapping method in xarray (Logan Gunthorpe) - Map requests that traverse a host bridge (Logan Gunthorpe) - Allow IOMMU for host bridge whitelist (Logan Gunthorpe) * pci/p2pdma: PCI/P2PDMA: Update pci_p2pdma_distance_many() documentation PCI/P2PDMA: Allow IOMMU for host bridge whitelist PCI/P2PDMA: dma_map() requests that traverse the host bridge PCI/P2PDMA: Store mapping method in an xarray PCI/P2PDMA: Factor out __pci_p2pdma_map_sg() PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg() PCI/P2PDMA: Add attrs argument to pci_p2pdma_map_sg() PCI/P2PDMA: Whitelist some Intel host bridges PCI/P2PDMA: Factor out host_bridge_whitelist() PCI/P2PDMA: Apply host bridge whitelist for ACS PCI/P2PDMA: Factor out __upstream_bridge_distance() PCI/P2PDMA: Add constants for map type results to upstream_bridge_distance() PCI/P2PDMA: Add provider's pci_dev to pci_p2pdma_pagemap struct PCI/P2PDMA: Introduce private pagemap structure
2019-09-23Merge branch 'pci/msi'Bjorn Helgaas
- Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) * pci/msi: PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for RISC-V
2019-09-23Merge branch 'pci/misc'Bjorn Helgaas
- Use devm_add_action_or_reset() helper (Fuqian Huang) - Mark expected switch fall-through (Gustavo A. R. Silva) - Convert sysfs device attributes from __ATTR() to DEVICE_ATTR() (Kelsey Skunberg) - Convert sysfs file permissions from S_IRUSR etc to octal (Kelsey Skunberg) - Move SR-IOV sysfs functions to iov.c (Kelsey Skunberg) - Add pci_info_ratelimited() to ratelimit PCI messages separately (Krzysztof Wilczynski) - Fix "'static' not at beginning of declaration" warnings (Krzysztof Wilczynski) - Clean up resource_alignment parameter to not require static buffer (Logan Gunthorpe) - Add ACS quirk for iProc PAXB (Abhinav Ratna) - Add pci_irq_vector() and other stubs for !CONFIG_PCI (Herbert Xu) * pci/misc: PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI PCI: Add ACS quirk for iProc PAXB PCI: Force trailing new line to resource_alignment_param in sysfs PCI: Move pci_[get|set]_resource_alignment_param() into their callers PCI: Clean up resource_alignment parameter to not require static buffer PCI: Use static const struct, not const static struct PCI: Add pci_info_ratelimited() to ratelimit PCI separately PCI/IOV: Remove group write permission from sriov_numvfs, sriov_drivers_autoprobe PCI/IOV: Move sysfs SR-IOV functions to iov.c PCI: sysfs: Change permissions from symbolic to octal PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO() PCI: sysfs: Define device attributes with DEVICE_ATTR*() PCI: Mark expected switch fall-through PCI: Use devm_add_action_or_reset()
2019-09-23Merge branch 'pci/enumeration'Bjorn Helgaas
- Consolidate _HPP & _HPX code in pci-acpi.h and remove unnecessary struct hotplug_program_ops (Krzysztof Wilczynski) - Fixup PCIe device types to remove the need for dev->has_secondary_link (Mika Westerberg) * pci/enumeration: PCI: Get rid of dev->has_secondary_link flag PCI: Make pcie_downstream_port() available outside of access.c PCI/ACPI: Remove unnecessary struct hotplug_program_ops PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*
2019-09-23Merge branch 'pci/encapsulate'Bjorn Helgaas
- Move many symbols from public linux/pci.h to subsystem-private drivers/pci/pci.h (Kelsey Skunberg) - Unexport pci_bus_get() and pci_bus_sem since they're not needed by modules (Kelsey Skunberg) - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) * pci/encapsulate: PCI: Make pci_set_of_node(), etc private PCI: Make pci_enable_ptm() private PCI: Make pcie_set_ecrc_checking(), pcie_ecrc_get_policy() private PCI: Make pci_ats_init() private PCI: Make pcie_update_link_speed() private PCI: Make pci_bus_get(), pci_bus_put() private PCI: Make pci_hotplug_io_size, mem_size, and bus_size private PCI: Make pci_save_vc_state(), pci_restore_vc_state(), etc private PCI: Make pci_get_host_bridge_device(), pci_put_host_bridge_device() private PCI: Make pci_check_pme_status(), pci_pme_wakeup_bus() private PCI: Make PCI_PM_* delay times private PCI: Unexport pci_bus_sem PCI: Unexport pci_bus_get() and pci_bus_put() PCI: Remove pci_block_cfg_access() et al (unused)
2019-09-20PCI: tegra: Add support to enable slot regulatorsVidya Sagar
Add support to get regulator information of 3.3V and 12V supplies of a PCIe slot from the respective controller's device-tree node and enable those supplies. This is required in platforms like p2972-0000 where the supplies to x16 slot owned by C5 controller need to be enabled before attempting to enumerate the devices. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-20PCI: tegra: Add support to configure sideband pinsVidya Sagar
Add support to configure sideband signal pins when the information is present in the respective controller device-tree node. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: fold in YueHaibing's fix for build error without CONFIG_PINCTRL; https://lore.kernel.org/r/20190920014807.38288-1-yuehaibing@huawei.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-20Merge tag 'powerpc-5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This is a bit late, partly due to me travelling, and partly due to a power outage knocking out some of my test systems *while* I was travelling. - Initial support for running on a system with an Ultravisor, which is software that runs below the hypervisor and protects guests against some attacks by the hypervisor. - Support for building the kernel to run as a "Secure Virtual Machine", ie. as a guest capable of running on a system with an Ultravisor. - Some changes to our DMA code on bare metal, to allow devices with medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space. - Support for firmware assisted crash dumps on bare metal (powernv). - Two series fixing bugs in and refactoring our PCI EEH code. - A large series refactoring our exception entry code to use gas macros, both to make it more readable and also enable some future optimisations. As well as many cleanups and other minor features & fixups. Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar, Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde" * tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits) powerpc/mm/mce: Keep irqs disabled during lockless page table walk powerpc: Use ftrace_graph_ret_addr() when unwinding powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR ftrace: Look up the address of return_to_handler() using helpers powerpc: dump kernel log before carrying out fadump or kdump docs: powerpc: Add missing documentation reference powerpc/xmon: Fix output of XIVE IPI powerpc/xmon: Improve output of XIVE interrupts powerpc/mm/radix: remove useless kernel messages powerpc/fadump: support holes in kernel boot memory area powerpc/fadump: remove RMA_START and RMA_END macros powerpc/fadump: update documentation about option to release opalcore powerpc/fadump: consider f/w load area powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel powerpc/fadump: improve how crashed kernel's memory is reserved powerpc/fadump: consider reserved ranges while releasing memory powerpc/fadump: make crash memory ranges array allocation generic ...
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-17Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-17Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core irq updates from Thomas Gleixner: "Updates from the irq departement: - Update the interrupt spreading code so it handles numa node with different CPU counts properly. - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI ranges. - Conversion of all alloc_fwnode() users to use physical addresses instead of virtual addresses so the virtual addresses are not leaked. The physical address is sufficient to identify the associated interrupt chip. - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips. - Enforce interrupt threading at compile time if RT is enabled. - Small updates and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices irqchip/uniphier-aidet: Use devm_platform_ioremap_resource() irqdomain: Add the missing assignment of domain->fwnode for named fwnode irqchip/mmp: Coexist with GIC root IRQ controller irqchip/mmp: Mask off interrupts from other cores irqchip/mmp: Add missing chained_irq_{enter,exit}() irqchip/mmp: Do not use of_address_to_resource() to get mux regs irqchip/meson-gpio: Add support for meson sm1 SoCs dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs genirq/affinity: Remove const qualifier from node_to_cpumask argument genirq/affinity: Spread vectors on node according to nr_cpu ratio genirq/affinity: Improve __irq_build_affinity_masks() irqchip: Remove dev_err() usage after platform_get_irq() irqchip: Add include guard to irq-partition-percpu.h irqchip/mmp: Do not call irq_set_default_host() on DT platforms irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803 irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks irqchip/gic-v3: Warn about inconsistent implementations of extended ranges irqchip/gic-v3: Add EPPI range support ...
2019-09-17PCI: vmd: Fix shadow offsets to reflect spec changesJon Derrick
The shadow offset scratchpad was moved to 0x2000-0x2010. Update the location to get the correct shadow offset. Fixes: 6788958e4f3c ("PCI: vmd: Assign membar addresses from shadow registers") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+
generated by cgit (git 2.34.1) at 2025-07-16 02:52:03 +0000