summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2019-09-17PCI: vmd: Fix config addressing when using bus offsetsJon Derrick
VMD maps child device config spaces to the VMD Config BAR linearly regardless of the starting bus offset. Because of this, the config address decode must ignore starting bus offsets when mapping the BDF to the config space address. Fixes: 2a5a9c9a20f9 ("PCI: vmd: Add offset to bus numbers if necessary") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+
2019-09-16Merge tag 'please-pull-ia64_for_5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "The big change here is removal of support for SGI Altix" * tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits) genirq: remove the is_affinity_mask_valid hook ia64: remove CONFIG_SWIOTLB ifdefs ia64: remove support for machvecs ia64: move the screen_info setup to common code ia64: move the ROOT_DEV setup to common code ia64: rework iommu probing ia64: remove the unused sn_coherency_id symbol ia64: remove the SGI UV simulator support ia64: remove the zx1 swiotlb machvec ia64: remove CONFIG_ACPI ifdefs ia64: remove CONFIG_PCI ifdefs ia64: remove the hpsim platform ia64: remove now unused machvec indirections ia64: remove support for the SGI SN2 platform drivers: remove the SGI SN2 IOC4 base support drivers: remove the SGI SN2 IOC3 base support qla2xxx: remove SGI SN2 support qla1280: remove SGI SN2 support misc/sgi-xp: remove SGI SN2 support char/mspec: remove SGI SN2 support ...
2019-09-16PCI: dwc: Add validation that PCIe core is set to correct modeJonathan Chocron
Some PCIe controllers can be set to either Host or EP according to some early boot FW. To make sure there is no discrepancy (e.g. FW configured the port to EP mode while the DT specifies it as a host bridge or vice versa), a check has been added for each mode. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-09-16PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driverJonathan Chocron
This driver is DT based and utilizes the DesignWare APIs. It allows using a smaller ECAM range for a larger bus range - usually an entire bus uses 1MB of address space, but the driver can use it for a larger number of buses. This is achieved by using a HW mechanism which allows changing the BUS part of the "final" outgoing config transaction. There are 2 HW regs, one which is basically a bitmask determining which bits to take from the AXI transaction itself and another which holds the complementary part programmed by the driver. All link initializations are handled by the boot FW. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-16PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root PortJonathan Chocron
The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some platforms it is configured to not advertise the capability at all, while on others it (mistakenly) does. This causes a panic during initialization by the pcieport driver, since it tries to configure the MSI-X capability. Specifically, when trying to access the MSI-X table a "non-existing addr" exception occurs. Example stacktrace snippet: SError Interrupt on CPU2, code 0xbf000000 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __pci_enable_msix_range+0x4e4/0x608 lr : __pci_enable_msix_range+0x498/0x608 sp : ffffff80117db700 x29: ffffff80117db700 x28: 0000000000000001 x27: 0000000000000001 x26: 0000000000000000 x25: ffffffd3e9d8c0b0 x24: 0000000000000000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 x20: 0000000000000000 x19: ffffffd3e9d8c000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffffff80116496c8 x14: ffffffd3e9844503 x13: ffffffd3e9844502 x12: 0000000000000038 x11: ffffffffffffff00 x10: 0000000000000040 x9 : ffffff801165e270 x8 : ffffff801165e268 x7 : 0000000000000002 x6 : 00000000000000b2 x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffd3e9844680 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xa8/0xcc panic+0x140/0x334 nmi_panic+0x6c/0x70 arm64_serror_panic+0x74/0x88 __pte_error+0x0/0x28 el1_error+0x84/0xf8 __pci_enable_msix_range+0x4e4/0x608 pci_alloc_irq_vectors_affinity+0xdc/0x150 pcie_port_device_register+0x2b8/0x4e0 pcie_portdrv_probe+0x34/0xf0 Notice that this quirk also disables MSI (which may work, but hasn't been tested nor has a current use case), since currently there is no standard way to disable only MSI-X. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-16PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root PortJonathan Chocron
The Amazon Annapurna Labs PCIe Root Port exposes the VPD capability, but there is no actual support for it. Trying to access the VPD (for example, as part of lspci -vv or when reading the vpd sysfs file), results in the following warning print: pcieport 0001:00:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-16PCI: Add ACS quirk for Amazon Annapurna Labs root portsAli Saidi
The Amazon's Annapurna Labs root ports don't advertise an ACS capability, but they don't allow peer-to-peer transactions and do validate bus numbers through the SMMU. Additionally, it's not possible for one RP to pass traffic to another RP. Signed-off-by: Ali Saidi <alisaidi@amazon.com> Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-10PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbersHaiyang Zhang
As recommended by Azure host team, the bytes 4, 5 have more uniqueness (info entropy) than bytes 8, 9 so use them as the PCI domain numbers. On older hosts, bytes 4, 5 can also be used -- no backward compatibility issues are introduced and the chance of collision is greatly reduced. In the rare cases of collision, the driver code detects and finds another number that is not in use. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Sasha Levin <sashal@kernel.org>
2019-09-08PCI: tegra: Add Tegra194 PCIe supportVidya Sagar
Add support for Synopsys DesignWare core IP based PCIe host controller present in the Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-07PCI: Get rid of dev->has_secondary_link flagMika Westerberg
In some systems, the Device/Port Type in the PCI Express Capabilities register incorrectly identifies upstream ports as downstream ports. d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") addressed this by adding pci_dev.has_secondary_link, which is set for downstream ports. But this is confusing because pci_pcie_type() sometimes gives the wrong answer, and it's not obvious that we should use pci_dev.has_secondary_link instead. Reduce the confusion by correcting the type of the port itself so that pci_pcie_type() returns the actual type regardless of what the Device/Port Type register claims it is. Update the users to call pci_pcie_type() and pcie_downstream_port() accordingly, and remove pci_dev.has_secondary_link completely. Link: https://lore.kernel.org/linux-pci/20190703133953.GK128603@google.com/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20190822085553.62697-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-07PCI: Make pcie_downstream_port() available outside of access.cMika Westerberg
pcie_downstream_port() is useful in other places where code needs to determine whether the PCIe port is downstream so make it available outside of access.c. Link: https://lore.kernel.org/r/20190822085553.62697-1-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-09-06Merge tag 'irqchip-5.4' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for Linux 5.4 from Marc Zyngier: - Large GICv3 updates to support new PPI and SPI ranges - Conver all alloc_fwnode() users to use PAs instead of VAs - Add support for Marvell's MMP3 irqchip - Add support for Amlogic Meson SM1 - Various cleanups and fixes
2019-09-05PCI: Add ACS quirk for iProc PAXBAbhinav Ratna
iProc PAXB Root Ports don't advertise an ACS capability, but they do not allow peer-to-peer transactions between Root Ports. Add an ACS quirk so each Root Port can be in a separate IOMMU group. [bhelgaas: commit log, comment, use common implementation style] Link: https://lore.kernel.org/r/1566275985-25670-1-git-send-email-srinath.mannam@broadcom.com Signed-off-by: Abhinav Ratna <abhinav.ratna@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com>
2019-09-05PCI: Force trailing new line to resource_alignment_param in sysfsLogan Gunthorpe
When 'pci=resource_alignment=' is specified on the command line, there is no trailing new line. Then, when it's read through the corresponding sysfs attribute, there will be no newline and a cat command will not show correctly in a shell. If the parameter is set through sysfs a new line will be stored and it will 'cat' correctly. To solve this, append a new line character in the show function if one does not already exist. Link: https://lore.kernel.org/r/20190822161013.5481-4-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Move pci_[get|set]_resource_alignment_param() into their callersLogan Gunthorpe
Both the functions pci_get_resource_alignment_param() and pci_set_resource_alignment_param() are now only called in one place: resource_alignment_show() and resource_alignment_store() respectively. There is no value in this extra set of functions so move both into their callers respectively. [bhelgaas: fold in "GFP_KERNEL while atomic" fix from Christoph Hellwig <hch@infradead.org> https://lore.kernel.org/r/20190902075006.GB754@infradead.org] Link: https://lore.kernel.org/r/20190822161013.5481-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: pciehp: Refer to "Indicators" instead of "LEDs" in commentsBjorn Helgaas
The PCIe spec doesn't mention "green LEDs" or "amber LEDs". Replace those terms with "Power Indicator" and "Attention Indicator" so the comments match the spec language. Comment changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: pciehp: Remove pciehp_green_led_{on,off,blink}()Denis Efremov
Remove pciehp_green_led_{on,off,blink}() and use pciehp_set_indicators() instead, since the code is mostly the same. [bhelgaas: drop set_power_indicator() wrapper to reduce the number of interfaces] Link: https://lore.kernel.org/r/20190903111021.1559-5-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-09-05PCI: pciehp: Remove pciehp_set_attention_status()Denis Efremov
Remove pciehp_set_attention_status() and use pciehp_set_indicators() instead, since the code is mostly the same. Link: https://lore.kernel.org/r/20190903111021.1559-4-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-09-05PCI: pciehp: Combine adjacent indicator updatesDenis Efremov
Combine adjacent updates of power and attention indicators into a single pciehp_set_indicators() call. This sends one command to the hotplug controller instead of two. Link: https://lore.kernel.org/r/20190903111021.1559-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2019-09-05PCI: pciehp: Add pciehp_set_indicators() to set both indicatorsDenis Efremov
Add pciehp_set_indicators() to set power and attention indicators with a single register write. This is a minor optimization because we frequently set both indicators and this can do it with a single command. It also reduces the number of interfaces related to the indicators and makes them more discoverable because callers use the PCI_EXP_SLTCTL_ATTN_IND_* and PCI_EXP_SLTCTL_PWR_IND_* definitions directly. [bhelgaas: extend commit log, s/PCI_EXP_SLTCTL_.*_IND_NONE/INDICATOR_NOOP/ so they don't look like things defined by the spec, add function doc, mask commands to make it obvious we only send valid commands (pcie_do_write_cmd() does mask it, but requires more effort to verify)] Link: https://lore.kernel.org/r/20190903111021.1559-2-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Clean up resource_alignment parameter to not require static bufferLogan Gunthorpe
Clean up the 'resource_alignment' parameter code to use kstrdup() in the initcall routine instead of a static buffer that wastes memory regardless of whether the feature is used. This allows us to drop 'COMMAND_LINE_SIZE' bytes (typically 256-4096 depending on architecture) of static data. This is similar to what has been done for the 'disable_acs_redir' parameter. Link: https://lore.kernel.org/r/20190822161013.5481-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Use static const struct, not const static structKrzysztof Wilczynski
Move the static keyword to the front of declarations of pci_regs_behavior[] and pcie_cap_regs_behavior[], which resolves compiler warnings when building with "W=1": drivers/pci/pci-bridge-emul.c:41:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] const static struct pci_bridge_reg_behavior pci_regs_behavior[] = { ^ drivers/pci/pci-bridge-emul.c:176:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] const static struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = { ^ Link: https://lore.kernel.org/r/20190826151436.4672-1-kw@linux.com Link: https://lore.kernel.org/r/20190828131733.5817-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-09-05PCI: Add pci_info_ratelimited() to ratelimit PCI separatelyKrzysztof Wilczynski
Do not use printk_ratelimit() in drivers/pci/pci.c as it shares the rate limiting state with all other callers to the printk_ratelimit(). Add pci_info_ratelimited() (similar to pci_notice_ratelimited() added in the commit a88a7b3eb076 ("vfio: Use dev_printk() when possible")) and use it instead of printk_ratelimit() + pci_info(). Link: https://lore.kernel.org/r/20190825224616.8021-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI/IOV: Remove group write permission from sriov_numvfs, ↵Kelsey Skunberg
sriov_drivers_autoprobe Previously the sriov_numvfs and sriov_drivers_autoprobe sysfs files had 0664 permissions, which allowed group write. libvirt runs as root when dealing with PCI, and it chowns files needed by qemu, so group write permission should not be needed. Change these permissions from 0664 to 0644, which is what DEVICE_ATTR_RW() does by default. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20190905063226.43269-1-skunberg.kelsey@gmail.com Link: https://lore.kernel.org/r/850cf536-0b72-d78c-efaf-855dcb391087@redhat.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Donald Dutile <ddutile@redhat.com>
2019-09-05pci-hotplug/pnv_php: Add attention indicator supportOliver O'Halloran
pnv_php is generally used with PCIe bridges which provide a native interface for setting the attention and power indicator LEDs. Wire up those interfaces even if firmware does not have support for them (yet...) Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-11-oohall@gmail.com
2019-09-05pci-hotplug/pnv_php: Add support for IODA3 Power9 PHBsOliver O'Halloran
Currently we check that an IODA2 compatible PHB is upstream of this slot. This is mainly to avoid pnv_php creating slots for the various "virtual PHBs" that we create for NVLink. There's no real need for this restriction so allow it on IODA3. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-10-oohall@gmail.com
2019-09-05pci-hotplug/pnv_php: Add a reset_slot() callbackOliver O'Halloran
When performing EEH recovery of devices in a hotplug slot we need to use the slot driver's ->reset_slot() callback to prevent spurious hotplug events due to spurious DLActive and PresDet change interrupts. Add a reset_slot() callback to pnv_php so we can handle recovery of devices in pnv_php managed slots. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903101605.2890-9-oohall@gmail.com
2019-09-04PCI: iproc: Propagate errors for optional PHYsThierry Reding
devm_phy_get() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_phy_optional_get() is a function that exactly does what's required here, so use that instead. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com
2019-09-04PCI: histb: Propagate errors for optional regulatorsThierry Reding
regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Shawn Guo <shawn.guo@linaro.org>
2019-09-04PCI: armada8x: Propagate errors for optional PHYsThierry Reding
devm_of_phy_get_by_index() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get_by_index() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-09-04PCI: imx6: Propagate errors for optional regulatorsThierry Reding
regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: kernel@pengutronix.de Cc: linux-imx@nxp.com
2019-09-04PCI: exynos: Propagate errors for optional PHYsThierry Reding
devm_of_phy_get() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-04PCI: rockchip: Propagate errors for optional regulatorsThierry Reding
regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Shawn Lin <shawn.lin@rock-chips.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org
2019-08-30PCI: Remove unnecessary returnsKrzysztof Wilczynski
Remove unnecessary "return" statements at the end of void functions. No functional change intended. Link: https://lore.kernel.org/r/20190825221039.6977-1-kw@linux.com Link: https://lore.kernel.org/r/20190826095143.21353-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-30PCI: OF: Correct of_irq_parse_pci() documentationLubomir Rintel
530210c7814e ("of/irq: Replace of_irq with of_phandle_args") changed the of_irq_parse_pci() parameter type but didn't change the corresponding documentation. Update the function doc to match. Link: https://lore.kernel.org/r/20190807132049.10304-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-30PCI: Fix typos and whitespace errorsBjorn Helgaas
Fix typos in drivers/pci. Comment and whitespace changes only. Link: https://lore.kernel.org/r/20190819115306.27338-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> # armada8k
2019-08-28PCI/ACPI: Remove unnecessary struct hotplug_program_opsKrzysztof Wilczynski
Move the ACPI-specific structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci-acpi.c as they are not used anywhere else. Then remove the struct hotplug_program_ops that has been shared between drivers/pci/probe.c and drivers/pci/pci-acpi.c from drivers/pci/pci.h as it is no longer needed. The struct hotplug_program_ops was added by 87fcf12e846a ("PCI/ACPI: Remove the need for 'struct hotplug_params'") and replaced previously used struct hotplug_params enabling the support for the _HPX Type 3 Setting Record that was added by f873c51a155a ("PCI/ACPI: Implement _HPX Type 3 Setting Record"). The new struct allowed for the static functions such program_hpx_type0(), program_hpx_type1(), etc., from the drivers/pci/probe.c to be called from the function pci_acpi_program_hp_params() in the drivers/pci/pci-acpi.c. Previously a programming of _HPX Type 0 was as follows: drivers/pci/probe.c: program_hpx_type0() ... pci_configure_device() hp_ops = { .program_type0 = program_hpx_type0, ... } pci_acpi_program_hp_params(&hp_ops) drivers/pci/pci-acpi.c: pci_acpi_program_hp_params(&hp_ops) acpi_run_hpx(hp_ops) decode_type0_hpx_record() hp_ops->program_type0 # program_hpx_type0() called via hp_ops After the ACPI-specific functions, structs, enums, etc., have been moved to drivers/pci/pci-acpi.c there is no need for the hotplug_program_ops as all of the _HPX Type 0, 1, 2 and 3 are directly accessible. Link: https://lore.kernel.org/r/20190827094951.10613-4-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.cKrzysztof Wilczynski
Move program_hpx_type0(), program_hpx_type1(), etc., and enums hpx_type3_dev_type, hpx_type3_fn_type and hpx_type3_cfg_loc to drivers/pci/pci-acpi.c as these functions and enums are ACPI-specific. Move structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci.h as these are shared between drivers/pci/pci-acpi.c and drivers/pci/probe.c. Link: https://lore.kernel.org/r/20190827094951.10613-3-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*Krzysztof Wilczynski
The names of the hpp_type0, hpp_type1 and hpp_type2 structs suggest that they're related to _HPP, when in fact they're related to _HPX. The struct hpp_type0 denotes an _HPX Type 0 setting record that supersedes the _HPP setting record, and it has been used interchangeably for _HPP as per the ACPI specification (see version 6.3, section 6.2.9.1) which states that it should be applied to PCI, PCI-X and PCI Express devices, with settings being ignored if they are not applicable. Rename them to hpx_type0, hpx_type1 and hpx_type2 to reflect their relation to _HPX rather than _HPP. Link: https://lore.kernel.org/r/20190827094951.10613-2-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI: Move ASPM declarations to linux/pci.hKrzysztof Wilczynski
Move ASPM definitions and function prototypes from include/linux/pci-aspm.h to include/linux/pci.h so users only need to include <linux/pci.h>: PCIE_LINK_STATE_L0S PCIE_LINK_STATE_L1 PCIE_LINK_STATE_CLKPM pci_disable_link_state() pci_disable_link_state_locked() pcie_no_aspm() No functional changes intended. Link: https://lore.kernel.org/r/20190827095620.11213-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22Merge tag 'pci-v5.3-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Reset both NVIDIA GPU and HDA in ThinkPad P50 quirk, which was broken by another quirk that enabled the HDA device (Lyude Paul) - Fix pciebus-howto.rst documentation filename typo (Bjorn Helgaas) * tag 'pci-v5.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Documentation PCI: Fix pciebus-howto.rst filename typo PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaround
2019-08-22PCI: dwc: Return directly when num-lanes is not foundHou Zhiqiang
The num-lanes is optional since it is not needed on some platforms that bring up the link in firmware. The link programming is based on the num-lanes properties (which is optional); if it is not present code must return instead of fiddling with the lanes value to print an error message. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-22PCI: hv: Add a Hyper-V PCI interface driver for software backchannel interfaceHaiyang Zhang
This interface driver is a helper driver allows other drivers to have a common interface with the Hyper-V PCI frontend driver. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22PCI: hv: Add a paravirtual backchannel in softwareDexuan Cui
Windows SR-IOV provides a backchannel mechanism in software for communication between a VF driver and a PF driver. These "configuration blocks" are similar in concept to PCI configuration space, but instead of doing reads and writes in 32-bit chunks through a very slow path, packets of up to 128 bytes can be sent or received asynchronously. Nearly every SR-IOV device contains just such a communications channel in hardware, so using this one in software is usually optional. Using the software channel, however, allows driver implementers to leverage software tools that fuzz the communications channel looking for vulnerabilities. The usage model for these packets puts the responsibility for reading or writing on the VF driver. The VF driver sends a read or a write packet, indicating which "block" is being referred to by number. If the PF driver wishes to initiate communication, it can "invalidate" one or more of the first 64 blocks. This invalidation is delivered via a callback supplied by the VF driver by this driver. No protocol is implied, except that supplied by the PF and VF drivers. Signed-off-by: Jake Oshins <jakeo@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21PCI: mobiveil: Fix the CPU base address setup in inbound windowHou Zhiqiang
Current code erroneously sets-up the CPU base address through the parameter 'pci_addr', which is passed to initialize the CPU (AXI) base address of the inbound window where the controller maps the PCI address space into CPU physical address space; furthermore, it also truncates it by programming only the lower 32-bit value into the inbound CPU address register. Fix both issues by introducing a new parameter 'u64 cpu_addr' to initialize both lower 32-bit and upper 32-bit of the CPU physical base address mapping PCI inbound transactions into CPU (AXI) ones. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-08-21PCI: kirin: Make structure kirin_dw_pcie_ops constantNishka Dasgupta
Static variable kirin_dw_pcie_ops, of type dw_pcie_ops, is used only once, when it is assigned to the constant field ops of variable pci (having type dw_pcie) so kirin_dw_pcie_ops is never modified. Make it constant to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-21PCI: hv: Detect and fix Hyper-V PCI domain number collisionHaiyang Zhang
Currently in Azure cloud, for passthrough devices, the host sets the device instance ID's bytes 8 - 15 to a value derived from the host HWID, which is the same on all devices in a VM. So, the device instance ID's bytes 8 and 9 provided by the host are no longer unique. This affects all Azure hosts since July 2018, and can cause device passthrough to VMs to fail because the bytes 8 and 9 are used as PCI domain number. Collision of domain numbers will cause the second device with the same domain number fail to load. In the cases of collision, we will detect and find another number that is not in use. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Sasha Levin <sashal@kernel.org>
2019-08-20PCI/IOV: Move sysfs SR-IOV functions to iov.cKelsey Skunberg
The sysfs SR-IOV functions are only needed when the kernel is built with SR-IOV support. Rather than put them in pci-sysfs.c under #ifdef CONFIG_PCI_IOV, move them to iov.c, which is only compiled when CONFIG_PCI_IOV=y. Link: https://lore.kernel.org/r/20190813204513.4790-4-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Donald Dutile <ddutile@redhat.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-08-20PCI: sysfs: Change permissions from symbolic to octalKelsey Skunberg
We prefer octal permissions over symbolic permissions such as "(S_IWUSR | S_IWGRP)". Change all symbolic permissions to octal permissions, e.g., - (S_IWUSR | S_IWGRP) + 0220 Link: https://lore.kernel.org/r/20190813204513.4790-3-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Donald Dutile <ddutile@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-16 11:57:40 +0000