Age | Commit message (Collapse) | Author |
|
Change the Kconfig dependency so that it doesn't require both I2C and SPI
subsystems to be built. Make a few small changes to the code so that the
code for a bus is only called if the bus is being built.
When SPI support was added to serial-multi-instantiate it created a
dependency that both CONFIG_I2C and CONFIG_SPI must be enabled.
Typically they are, but there's no reason why this should be a
requirement. A specific kernel build could have only I2C devices
or only SPI devices. It should be possible to use serial-multi-instantiate
if only I2C or only SPI is enabled.
The dependency formula used is:
depends on (I2C && !SPI) || (!I2C && SPI) || (I2C && SPI)
The advantage of this approach is that if I2C=m or SPI=m then
SERIAL_MULTI_INSTANTIATE is limited to n/m.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240814132939.308696-1-rf@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The LEGX0820 ACPI device is expected to provide a custom operation
region:
OperationRegion (XIN1, 0x8F, Zero, 0x04B0)
Field (XIN1, AnyAcc, Lock, Preserve)
{
DMSG, 8,
HDAP, 8,
Offset (0x03),
AFNM, 8,
Offset (0x10),
P80B, 8,
P81B, 8,
P82B, 8,
P83B, 8,
P84B, 8,
P85B, 8,
P86B, 8,
P87B, 8,
Offset (0x20),
DTTM, 8,
TMP1, 8,
LTP1, 8,
HTP1, 8,
TMP2, 8,
LTP2, 8,
HTP2, 8,
Offset (0x3E8),
PMSG, 1600
}
The PMSG field is used by AML code to log debug messages when DMSG is
true. Since those debug messages are already logged using the standard
ACPI Debug object, we set DMSG unconditionally to 0x00 and ignore any
writes to PMSG.
The TMPx, LTPx, HTPx and AFNM fields are used to inform the driver when
the temperature/(presumably) trip points/fan mode changes. This only
happens when the DTTM flag is set.
Unfortunately we have to implement support for this operation region
because the AML codes uses code constructs like this one:
If (((\_SB.XINI.PLAV != Zero) && (\_SB.XINI.DTTM != Zero)))
The PLAV field gets set to 1 when the driver registers its address space
handler, so by default XIN1 should not be accessed.
However ACPI does not use short-circuit evaluation when evaluating
logical conditions. This causes the DTTM field to be accessed even
when PLAV is 0, which results in an ACPI error.
Since this check happens inside various thermal-related ACPI control
methods, various thermal zone become unusable since any attempt to
read their temperature results in an ACPI error.
Fix this by providing support for this operation region. I suspect
that the problem does not happen under Windows (which seemingly does
not use short-circuit evaluation either) because the necessary driver
comes preinstalled with the machine.
Tested-by: Chris <ghostwind@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240813022903.20567-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The SMU metrics table has been revised for the 1AH family series.
Introduce a new metrics table structure to retrieve comprehensive metrics
information from the PMFW. This information will be utilized by the PMF
driver to adjust system thermals.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240819063404.378061-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The CPU ID macros are needed by the Smart PC builder. Therefore, transfer
the CPU ID macros from core.c to the common PMF header file.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240819063404.378061-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The APMF function 14 (Notify Smart PC Solution Updates) allows the BIOS
(AMD/OEM) to be informed about the outputs of custom Smart PC policies.
Enhance the PMF driver to invoke APMF function 14 when these custom policy
outputs are triggered.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240812131839.308768-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
pmc_for_each_mode() takes i (index) variable name as a parameter but
the loop index is not used by any of the callers. Make the index
variable internal to pmc_for_each_mode().
This also changes the loop logic such that ->lpm_en_modes[] is never
read beyond num_lpm_modes.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240806083047.1562-1-ilpo.jarvinen@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The new ROG Ally X functions the same as the previus model so we can use
the same method to ensure the MCU USB devices wake and reconnect
correctly.
Given that two devices marks the start of a trend, this patch also adds
a quirk table to make future additions easier if the MCU is the same.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240805234603.38736-1-luke@ljones.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since moving ymc_trigger_ec from lenovo-ymc to ideapad-laptop, only the
latter uses these definitions and functions.
Move them back to source file.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/57a48d2582b567f6c6fbcd3b379e17aee0fb5a94.1721898747.git.soyer@irl.hu
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Merge 'platform-drivers-x86-v6.11-3' into review-hans to avoid conflicts
when merging further ideapad-laptop patches.
platform-drivers-x86 for v6.11-3
Fixes:
- ideapad-laptop / lenovo-ymc: Protect VPC calls with a mutex
- amd/pmf: Query HPD data also when ALS is disabled
The following is an automated shortlog grouped by driver:
amd/pmf:
- Fix to Update HPD Data When ALS is Disabled
ideapad-laptop:
- add a mutex to synchronize VPC commands
- introduce a generic notification chain
- move ymc_trigger_ec from lenovo-ymc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"While the ideapad concurrency fix itself is relatively
straightforward, it required moving code around and adding a bit of
supporting infrastructure to have a clean inter-driver interface. This
shows up in the diffstats.
- ideapad-laptop / lenovo-ymc: Protect VPC calls with a mutex
- amd/pmf: Query HPD data also when ALS is disabled"
* tag 'platform-drivers-x86-v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: add a mutex to synchronize VPC commands
platform/x86: ideapad-laptop: move ymc_trigger_ec from lenovo-ymc
platform/x86: ideapad-laptop: introduce a generic notification chain
platform/x86/amd/pmf: Fix to Update HPD Data When ALS is Disabled
|
|
Add tracing support for the SBAF IFS tests, which may be useful for
debugging systems that fail these tests. Log details like test content
batch number, SBAF bundle ID, program index and the exact errors or
warnings encountered by each HT thread during the test.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-5-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In a core, the SBAF test engine is shared between sibling CPUs.
An SBAF test image contains multiple bundles. Each bundle is further
composed of subunits called programs. When a SBAF test (for a particular
core) is triggered by the user, each SBAF bundle from the loaded test
image is executed sequentially on all the threads on the core using
the stop_core_cpuslocked mechanism. Each bundle execution is initiated by
writing to MSR_ACTIVATE_SBAF.
SBAF test bundle execution may be aborted when an interrupt occurs or
if the CPU does not have enough power budget for the test. In these
cases the kernel restarts the test from the aborted bundle. SBAF
execution is not retried if the test fails or if the test makes no
forward progress after 5 retries.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-4-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Structural Based Functional Test at Field (SBAF) is a new type of
testing that provides comprehensive core test coverage complementing
existing IFS tests like Scan at Field (SAF) or ArrayBist.
SBAF device will appear as a new device instance (intel_ifs_2) under
/sys/devices/virtual/misc. The user interaction necessary to load the
test image and test a particular core is the same as the existing scan
test (intel_ifs_0).
During the loading stage, the driver will look for a file named
ff-mm-ss-<batch02x>.sbft in the /lib/firmware/intel/ifs_2 directory.
The hardware interaction needed for loading the image is similar to
SAF, with the only difference being the MSR addresses used. Reuse the
SAF image loading code, passing the SBAF-specific MSR addresses via
struct ifs_test_msrs in the driver device data.
Unlike SAF, the SBAF test image chunks are further divided into smaller
logical entities called bundles. Since the SBAF test is initiated per
bundle, cache the maximum number of bundles in the current image, which
is used for iterating through bundles during SBAF test execution.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-3-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
IFS tests such as Scan at Field (SAF) or Structural Based Functional
Test at Field (SBAF), require the user to load a test image. The image
loading process is similar across these tests, with the only difference
being MSR addresses used. To reuse the code between these tests, remove
the hard coding of MSR addresses and allow the driver to pass the MSR
addresses per IFS test (via driver device data).
Add a new structure named "struct ifs_test_msrs" to specify the
test-specific MSR addresses. Each IFS test will provide this structure,
enabling them to reuse the common code.
This is a preliminary patch in preparation for the addition of SBAF
support.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-2-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
After commit '1630dc626c87 ("platform/x86: ISST: Add model specific
loading for common module")' isst_misc_reg() and isst_misc_unreg() can be
simplified. Since these functions are only called during module_init()
and module_exit() respectively, there is no contention while calling
misc_register()/misc_deregister or isst_if_cpu_info_init()/
isst_if_cpu_info_exit().
Hence remove mutex and reference counting.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731184256.1852840-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731125220.1147348-11-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731125220.1147348-10-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Ike Panhc <ike.pan@canonical.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731125220.1147348-9-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jonathan Woithe <jwoithe@just42.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20240731125220.1147348-8-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: "Luke D. Jones" <luke@ljones.dev>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731125220.1147348-7-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: "Luke D. Jones" <luke@ljones.dev>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731125220.1147348-6-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: "Luke D. Jones" <luke@ljones.dev>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731125220.1147348-5-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: "Luke D. Jones" <luke@ljones.dev>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731125220.1147348-4-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: "Luke D. Jones" <luke@ljones.dev>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731125220.1147348-3-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240731125220.1147348-2-tzimmermann@suse.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMT providers may require device specific actions before their telemetry
may be read. If the read_telem() is assigned, call it instead of
memcpy_fromio() and return. Since this needs to be done in multiple
locations, add pmt_telem_read_mmio() as a wrapper function to perform this
and any other needed checks.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20240725122346.4063913-4-michael.j.ruhl@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some PMT providers require device specific actions before their telemetry
can be read. Provide assignable PMT read callbacks to allow providers to
perform those actions.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20240725122346.4063913-3-michael.j.ruhl@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some drivers outside of PDX86 need access to the vsec header. Move it to
include/linux to make it easier to include.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20240725122346.4063913-2-michael.j.ruhl@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
While debugging runtime s0ix, we do need to check which required IPs
are not power gated. This patch adds code to show live substate status
vs requirements in sys/kernel/debug/pmc_core/substate_requirements to
help runtime s0ix debug.
Signed-off-by: Kane Chen <kane.chen@intel.com>
Link: https://lore.kernel.org/r/20240719122807.3853292-1-kane.chen@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Calling VPC commands consists of several VPCW and VPCR ACPI calls.
These calls and their results can get mixed up if they are called
simultaneously from different threads, like acpi notify handler,
sysfs, debugfs, notification chain.
The commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") made the race issues much worse than before it but some
races were possible even before that commit.
Add a mutex to synchronize VPC commands.
Fixes: e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs")
Fixes: e82882cdd241 ("platform/x86: Add driver for Yoga Tablet Mode switch")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/f26782fa1194ad11ed5d9ba121a804e59b58b026.1721898747.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some models need to trigger the EC after each YMC event for the yoga
mode control to work properly. EC triggering consist of a VPC call from
the lenovo-ymc module. Except for this, all VPC calls are in the
ideapad-laptop module.
Since ideapad-laptop has a notification chain, a new YMC_EVENT action
can be added and triggered from the lenovo-ymc module. Then the
ideapad-laptop can trigger the EC.
If the triggering is in the ideapad-laptop module, then the ec_trigger
module parameter should be there as well.
Move the ymc_trigger_ec functionality and the ec_trigger module
parameter to the ideapad-laptop module.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/d980ab3ac32b5e554f456b0ff17279bfdbe2a203.1721898747.git.soyer@irl.hu
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
There are several cases where a notification chain can simplify Lenovo
WMI drivers.
Add a generic notification chain into ideapad-laptop.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/c5a43efae8a32bd034c3d19c0a686941347575a7.1721898747.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If the Ambient Light Sensor (ALS) is disabled, the current code in the PMF
driver does not query for Human Presence Detection (HPD) data in
amd_pmf_get_sensor_info(). As a result, stale HPD data is used by PMF-TA
to evaluate policy conditions, leading to unexpected behavior in the policy
output actions.
To resolve this issue, modify the PMF driver to query HPD data
independently of ALS.
Since user_present is a boolean, modify the current code to return true if
the user is present and false if the user is away or if the sensor is not
detected, and report this status to the PMF TA firmware accordingly.
With this change, amd_pmf_get_sensor_info() now returns void instead of
int.
Fixes: cedecdba60f4 ("platform/x86/amd/pmf: Get ambient light information from AMD SFH driver")
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240730142316.3846259-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes:
- Fix ACPI notifier racing with itself (intel-vbtn)
- Initialize local variable to cover a timeout corner case
(intel/ifs)
- WMI docs spelling
New device IDs:
- amd/{pmc,pmf}: AMD 1Ah model 60h series.
- amd/pmf: SPS quirk support for ASUS ROG Ally X"
* tag 'platform-drivers-x86-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Initialize union ifs_status to zero
platform/x86: msi-wmi-platform: Fix spelling mistakes
platform/x86/amd/pmf: Add new ACPI ID AMDI0107
platform/x86/amd/pmc: Send OS_HINT command for new AMD platform
platform/x86/amd: pmf: Add quirk for ROG Ally X
platform/x86: intel-vbtn: Protect ACPI notify handler against recursion
|
|
Linking an object file into multiple modules is not supported
and causes a W=1 warning:
scripts/Makefile.build:236: drivers/platform/x86/intel/int3472/Makefile: common.o is added to multiple modules: intel_skl_int3472_discrete intel_skl_int3472_tps68470
Split out the common part here into a separate module to make it
more reliable.
Fixes: a2f9fbc247ee ("platform/x86: int3472: Split into 2 drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240529095009.1895618-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On almost all ASUS ROG series laptops the MCU used for the USB keyboard
also has a HID packet used for setting the brightness. This is usually
the same as the WMI method. But in some laptops the WMI method either
is missing or doesn't work, so we should default to the HID control.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240713074733.77334-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK
to adjust power limits.
These fan profiles have a different device id than the ROG series
and different order. This reorders the existing modes.
As part of keeping the patch clean the throttle_thermal_policy_available
boolean stored in the driver struct is removed and
throttle_thermal_policy_dev is used in place (as on init it is zeroed).
Co-developed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn>
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240609144849.2532-2-mohamed.ghanmi@supcom.tn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If the IFS scan test exits prematurely due to a timeout before
completing a single run, the union ifs_status remains uninitialized,
leading to incorrect test status reporting. To prevent this, always
initialize the union ifs_status to zero.
Fixes: 2b40e654b73a ("platform/x86/intel/ifs: Add scan test support")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240730155930.1754744-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add new ACPI ID AMDI0107 used by upcoming AMD platform to the PMF
supported list of devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240723132451.3488326-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
To initiate the HW deep state transition, the OS_HINT command has to be
sent to the PMFW. Add this support to the platforms that belong to family
1Ah model 60h series.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240718150119.3427190-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The ASUS ROG Ally X has the same issue as the G14 where it advertises
SPS support but doesn't use it.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240729020831.28117-1-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may
run on multiple CPU cores racing with themselves.
This race gets hit on Dell Venue 7140 tablets when undocking from
the keyboard, causing the handler to try and register priv->switches_dev
twice, as can be seen from the dev_info() message getting logged twice:
[ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
[ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17
[ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
After which things go seriously wrong:
[ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17'
...
[ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory.
[ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018
...
Protect intel-vbtn notify_handler() from racing with itself with a mutex
to fix this.
Fixes: e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs")
Reported-by: En-Wei Wu <en-wei.wu@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2073001
Tested-by: Kostadin Stoilov <kmstoilov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240729120443.14779-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf: Report system state changes using existing input events
- asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop
keyboard RGB LED sysfs interface
- dell-pc: Fan modes / platform profile support
- hp-wmi: Fix platform profile switching on Omen/Victus laptops
- intel/ISST: Use only TPMI interface when TPMI and legacy interfaces
are available
- intel/pmc: LTR restore support to pair with LTR ignore
- intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU
numbering mapping support
- WMI: driver override support and docs improvements
- lenovo-yoga-c630: Support for EC (platform/arm64)
- platform/arm64: Fix build with COMPILE_TEST (broke after addition of
C630)
- tools: Intel Speed Select Turbo Ratio Limit fix
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: asus-wmi: fix TUF laptop RGB variant
platform/x86/intel/tpmi/plr: Fix output in plr_print_bits()
Docs/admin-guide: Remove pmf leftover reference from the index
platform/x86: ideapad-laptop: use cleanup.h
platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function
platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM
platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM
platform/x86/amd/pmf: Remove update system state document
platform/x86/amd/pmf: Use existing input event codes to update system states
platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops
platform/x86:intel/pmc: Add support to undo ltr_ignore
platform/x86:intel/pmc: Use the Elvis operator
platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro
platform/x86:intel/pmc: Remove unneeded min_t check
platform/x86:intel/pmc: Add support to show ltr_ignore value
platform/x86:intel/pmc: Move pmc assignment closer to first usage
platform/x86:intel/pmc: Convert index variables to be unsigned
platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers
platform/x86:intel/pmc: Use the return value of pmc_core_send_msg
tools/power/x86/intel-speed-select: v1.20 release
...
|
|
In kbd_rgb_mode_store the dev_get_drvdata() call was assuming the device
data was asus_wmi when it was actually led_classdev.
This patch corrects this by making the correct chain of calls to get the
asus_wmi driver data.
Fixes: ae834a549ec1 ("platform/x86: asus-wmi: add support variant of TUF RGB")
Tested-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240716011130.17464-2-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Smatch complains that 'str' can be used without being initialized:
drivers/platform/x86/intel/intel_plr_tpmi.c:178 plr_print_bits()
error: uninitialized symbol 'str'.
In this loop, we iterate over all the set bits and print the name of the
bit. The intention is that if there is a bit which is between 0-31 we
look for the name in the first array plr_coarse_reasons[] which has 10
elements. If the bit is in the 32-63 range we look for it in the
plr_fine_reasons[] array which has 30 elements. If the bit is in the
invalid ranges, 10-31 or 62-63, then we should print "UNKNOWN(%d)".
The problem is that 'str' needs to be initialized at the start of each
iteration, otherwise if we can't find the string then instead of printing
"UNKNOWN(%d)", we will re-print whatever the previous bit was.
Fixes: 9e9397a41b7b ("platform/x86/intel/tpmi/plr: Add support for the plr mailbox")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b0084e70-4144-445a-9b89-fb19f6b8336a@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use cleanup.h helpers to simplify some code paths.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/851d4180f1df5a10ca6e2feaf429611f1c0ccc88.1720515666.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
function
Fix ill-formed implementation of the platform_profile_omen_get function
introduced by the commit d23430233494 ("platform/x86: hp-wmi: Fix
platform profile option switch bug on Omen and Victus laptops").
platform_profile_omen_get() is .profile_get function that should set
*profile and return 0 on success.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: d23430233494 ("platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops")
Signed-off-by: Alexis Belmonte <alexbelm48@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/ZpFnV8w1558BW7iZ@alexis-pc
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|