| Age | Commit message (Collapse) | Author |
|---|
|
This is done in preparation to introduce other variants of the Novatek NVT
touchscreen controller that can be supported by the driver.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-1-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240920151445.499933-2-u.kleine-koenig@baylibre.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Hans de Goede:
- asus-wmi: Add support for vivobook fan profiles
- dell-laptop: Add knobs to change battery charge settings
- lg-laptop: Add operation region support
- intel-uncore-freq: Add support for efficiency latency control
- intel/ifs: Add SBAF test support
- intel/pmc: Ignore all LTRs during suspend
- platform/surface: Support for arm64 based Surface devices
- wmi: Pass event data directly to legacy notify handlers
- x86/platform/geode: switch GPIO buttons and LEDs to software
properties
- bunch of small cleanups, fixes, hw-id additions, etc.
* tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
MAINTAINERS: adjust file entry in INTEL MID PLATFORM
platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED
platform/mellanox: mlxbf-pmc: fix lockdep warning
platform/x86/amd: pmf: Add quirk for TUF Gaming A14
platform/x86: touchscreen_dmi: add nanote-next quirk
platform/x86: asus-wmi: don't fail if platform_profile already registered
platform/x86: asus-wmi: add debug print in more key places
platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder
platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm
MAINTAINERS: Add Intel MID section
platform/x86: panasonic-laptop: Add support for programmable buttons
platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs()
platform/x86: intel/pmc: Ignore all LTRs during suspend
platform/x86: wmi: Call both legacy and WMI driver notify handlers
platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data()
platform/x86: wmi: Remove wmi_get_event_data()
platform/x86: wmi: Pass event data directly to legacy notify handlers
platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning
platform/x86: x86-android-tablets: Fix spelling in the comments
platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
- Adjust DMI match table for Framework Laptop for improving
maintainabilities for both legacy and new models
- Add .remove driver callback for cros_ec_typec in order to allow the
driver to be rebound
- Use kmemdup_array() for taking care possible overflows
* tag 'chrome-platform-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: chromeos_laptop: Use kmemdup_array
platform/chrome: cros_ec_typec: add remove driver hook
platform/chrome: cros_ec_lpc: switch primary DMI data for Framework Laptop
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI. The one new core feature here
is support for configuring the state of the MOSI pin when the bus is
idle, there are some devices which are very fragile in this regard
even when the chip select signal is not asserted. Otherwise we have
some new driver support, a bunch of small fixes and some general
cleanup work.
- Support for configuring the state of the MOSI pin when the the bus
is idle
- Add the Elgin JG0309-01 in spidev
- Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
i.MX8ULP, and Rockchip RK3576 controllers
I also accidentally pulled in an IIO DT bindings update due to a typo
when applying the MOSI idle state patches"
* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
spi: geni-qcom: Use devm functions to simplify code
spi: remove spi_controller_is_slave() and spi_slave_abort()
platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
spi: slave-mt27xx: switch to use target_abort
spi: spidev: switch to use spi_target_abort()
spi: slave-system-control: switch to use spi_target_abort()
spi: slave-time: switch to use spi_target_abort()
spi: switch to use spi_controller_is_target()
spi: fspi: add support for imx8ulp
spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
dt-bindings: spi: nxp-fspi: add imx8ulp support
spi: spidev_fdx: Fix the wrong format specifier
spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
spi: dt-bindings: Add rockchip,rk3576-spi compatible
spi: Revert "spi: Insert the missing pci_dev_put()before return"
spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
spi: ppc4xx: Sort headers
spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
spi: zynqmp-gqspi: Simplify with dev_err_probe()
spi: zynqmp-gqspi: Use devm_spi_alloc_host()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
|
buttons LED
The "input-events" LED trigger used to turn on the backlight LEDs had to
be rewritten to use led_trigger_register_simple() + led_trigger_event()
to fix a serious locking issue.
This means it no longer supports using blink_brightness to set a per LED
brightness for the trigger and it no longer sets LED_CORE_SUSPENDRESUME.
Adjust the MiPad 2 bottom bezel touch buttons LED class device to match:
1. Make LED_FULL the maximum brightness to fix the LED brightness
being very low when on.
2. Set flags = LED_CORE_SUSPENDRESUME.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240916090255.35548-1-hdegoede@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly continue to rework the thermal core and the thermal zone
driver interface to make the code more straightforward and reduce
bloat
The most significant piece of this work is a change of the code
related to binding cooling devices to thermal zones which, among other
things, replaces two previously existing thermal zone operations with
one allowing driver implementations to be much simpler
There is also a new thermal core testing module allowing mock thermal
zones to be created and controlled via debugfs in order to exercise
the thermal core functionality. It is expected to be used for
implementing thermal core self tests in the future
Apart from the above, there are assorted thermal driver updates
Specifics:
- Update some thermal drivers to eliminate thermal_zone_get_trip()
calls from them and get rid of that function (Rafael Wysocki)
- Update the thermal sysfs code to store trip point attributes in
trip descriptors and get to trip points via attribute pointers
(Rafael Wysocki)
- Move the computation of the low and high boundaries for
thermal_zone_set_trips() to __thermal_zone_device_update() (Daniel
Lezcano)
- Introduce a debugfs-based facility for thermal core testing (Rafael
Wysocki)
- Replace the thermal zone .bind() and .unbind() callbacks for
binding cooling devices to thermal zones with one .should_bind()
callback used for deciding whether or not a given cooling devices
should be bound to a given trip point in a given thermal zone
(Rafael Wysocki)
- Eliminate code that has no more users after the other changes, drop
some redundant checks from the thermal core and clean it up (Rafael
Wysocki)
- Fix rounding of delay jiffies in the thermal core (Rafael Wysocki)
- Refuse to accept trip point temperature or hysteresis that would
lead to an invalid threshold value when setting them via sysfs
(Rafael Wysocki)
- Adjust states of all uninitialized instances in the .manage()
callback of the Bang-bang thermal governor (Rafael Wysocki)
- Drop a couple of redundant checks along with the code depending on
them from the thermal core (Rafael Wysocki)
- Rearrange the thermal core to avoid redundant checks and simplify
control flow in a couple of code paths (Rafael Wysocki)
- Add power domain DT bindings for new Amlogic SoCs (Georges Stark)
- Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST
driver and add a Kconfig dependency on THERMAL_OF subsystem for the
STi driver (Raphael Gallais-Pou)
- Simplify the error code path in the probe functions in the brcmstb
driver with the helo of dev_err_probe() (Yan Zhen)
- Make imx_sc_thermal use dev_err_probe() (Alexander Stein)
- Remove trailing space after \n newline in the Renesas driver (Colin
Ian King)
- Add DT binding compatible string for the SA8255p to the tsens
thermal driver (Nikunj Kela)
- Use the devm_clk_get_enabled() helpers to simplify the init routine
in the sprd thermal driver (Huan Yang)
- Remove __maybe_unused notations for the functions by using the new
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and
Qoriq drivers (Fabio Estevam)
- Remove unused declarations from the ti-soc-thermal driver's header
file as the functions in question were removed previously (Zhang
Zekun)"
* tag 'thermal-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (48 commits)
thermal: core: Drop thermal_zone_device_is_enabled()
thermal: core: Check passive delay in monitor_thermal_zone()
thermal: core: Drop dead code from monitor_thermal_zone()
thermal: core: Drop redundant lockdep_assert_held()
thermal: gov_bang_bang: Adjust states of all uninitialized instances
thermal: sysfs: Add sanity checks for trip temperature and hysteresis
thermal/drivers/imx_sc_thermal: Use dev_err_probe
thermal/drivers/ti-soc-thermal: Remove unused declarations
thermal/drivers/imx: Remove __maybe_unused notations
thermal/drivers/qoriq: Remove __maybe_unused notations
thermal/drivers/sprd: Use devm_clk_get_enabled() helpers
dt-bindings: thermal: tsens: document support on SA8255p
thermal/drivers/renesas: Remove trailing space after \n newline
thermal/drivers/brcmstb_thermal: Simplify with dev_err_probe()
thermal/drivers/sti: Depend on THERMAL_OF subsystem
thermal/drivers/st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
dt-bindings: thermal: amlogic,thermal: add optional power-domains
thermal: core: Drop tz field from struct thermal_instance
thermal: core: Drop redundant checks from thermal_bind_cdev_to_trip()
thermal: core: Rename cdev-to-thermal-zone bind/unbind functions
...
|
|
It seems the mlxbf-pmc driver is missing initializing sysfs attributes
which causes the warning below when CONFIG_LOCKDEP and
CONFIG_DEBUG_LOCK_ALLOC are enabled. This commit fixes it.
[ 155.380843] BUG: key ffff470f45dfa6d8 has not been registered!
[ 155.386749] ------------[ cut here ]------------
[ 155.391361] DEBUG_LOCKS_WARN_ON(1)
[ 155.391381] WARNING: CPU: 4 PID: 1828 at kernel/locking/lockdep.c:4894 lockdep_init_map_type+0x1d0/0x288
[ 155.404254] Modules linked in: mlxbf_pmc(+) xfs libcrc32c mmc_block mlx5_core crct10dif_ce mlxfw ghash_ce virtio_net tls net_failover sha2
_ce failover psample sha256_arm64 dw_mmc_bluefield pci_hyperv_intf sha1_ce dw_mmc_pltfm sbsa_gwdt dw_mmc micrel mmc_core nfit i2c_mlxbf pwr_m
lxbf gpio_generic libnvdimm mlxbf_tmfifo mlxbf_gige dm_mirror dm_region_hash dm_log dm_mod
[ 155.436786] CPU: 4 UID: 0 PID: 1828 Comm: modprobe Kdump: loaded Not tainted 6.11.0-rc7-rep1+ #1
[ 155.445562] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.8.0.13249 Aug 7 2024
[ 155.455463] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 155.462413] pc : lockdep_init_map_type+0x1d0/0x288
[ 155.467196] lr : lockdep_init_map_type+0x1d0/0x288
[ 155.471976] sp : ffff80008a1734e0
[ 155.475279] x29: ffff80008a1734e0 x28: ffff470f45df0240 x27: 00000000ffffee4b
[ 155.482406] x26: 00000000000011b4 x25: 0000000000000000 x24: 0000000000000000
[ 155.489532] x23: ffff470f45dfa6d8 x22: 0000000000000000 x21: ffffd54ef6bea000
[ 155.496659] x20: ffff470f45dfa6d8 x19: ffff470f49cdc638 x18: ffffffffffffffff
[ 155.503784] x17: 2f30303a31444642 x16: ffffd54ef48a65e8 x15: ffff80010a172fe7
[ 155.510911] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47
[ 155.518037] x11: 0000000000000001 x10: 0000000000000001 x9 : ffffd54ef3f48a14
[ 155.525163] x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 00000000002bffa8
[ 155.532289] x5 : ffff4712bdcb6088 x4 : 0000000000000000 x3 : 0000000000000027
[ 155.539416] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff470f43e5be00
[ 155.546542] Call trace:
[ 155.548976] lockdep_init_map_type+0x1d0/0x288
[ 155.553410] __kernfs_create_file+0x80/0x138
[ 155.557673] sysfs_add_file_mode_ns+0x94/0x150
[ 155.562106] create_files+0xb0/0x248
[ 155.565672] internal_create_group+0x10c/0x328
[ 155.570105] internal_create_groups.part.0+0x50/0xc8
[ 155.575060] sysfs_create_groups+0x20/0x38
[ 155.579146] device_add_attrs+0x1b8/0x228
[ 155.583146] device_add+0x2a4/0x690
[ 155.586625] device_register+0x24/0x38
[ 155.590362] __hwmon_device_register+0x1e0/0x3c8
[ 155.594969] devm_hwmon_device_register_with_groups+0x78/0xe0
[ 155.600703] mlxbf_pmc_probe+0x224/0x3a0 [mlxbf_pmc]
[ 155.605669] platform_probe+0x6c/0xe0
[ 155.609320] really_probe+0xc4/0x398
[ 155.612887] __driver_probe_device+0x80/0x168
[ 155.617233] driver_probe_device+0x44/0x120
[ 155.621405] __driver_attach+0xf4/0x200
[ 155.625230] bus_for_each_dev+0x7c/0xe8
[ 155.629055] driver_attach+0x28/0x38
[ 155.632619] bus_add_driver+0x110/0x238
[ 155.636445] driver_register+0x64/0x128
[ 155.640270] __platform_driver_register+0x2c/0x40
[ 155.644965] pmc_driver_init+0x24/0xff8 [mlxbf_pmc]
[ 155.649833] do_one_initcall+0x70/0x3d0
[ 155.653660] do_init_module+0x64/0x220
[ 155.657400] load_module+0x628/0x6a8
[ 155.660964] init_module_from_file+0x8c/0xd8
[ 155.665222] idempotent_init_module+0x194/0x290
[ 155.669742] __arm64_sys_finit_module+0x6c/0xd8
[ 155.674261] invoke_syscall.constprop.0+0x74/0xd0
[ 155.678957] do_el0_svc+0xb4/0xd0
[ 155.682262] el0_svc+0x5c/0x248
[ 155.685394] el0t_64_sync_handler+0x134/0x150
[ 155.689739] el0t_64_sync+0x17c/0x180
[ 155.693390] irq event stamp: 6407
[ 155.696693] hardirqs last enabled at (6407): [<ffffd54ef3f48564>] console_unlock+0x154/0x1b8
[ 155.705207] hardirqs last disabled at (6406): [<ffffd54ef3f485ac>] console_unlock+0x19c/0x1b8
[ 155.713719] softirqs last enabled at (6404): [<ffffd54ef3e9740c>] handle_softirqs+0x4f4/0x518
[ 155.722320] softirqs last disabled at (6395): [<ffffd54ef3df0160>] __do_softirq+0x18/0x20
[ 155.730484] ---[ end trace 0000000000000000 ]---
Signed-off-by: Luiz Capitulino <luizcap@redhat.com>
Link: https://lore.kernel.org/r/20240912190532.377097-1-luizcap@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The ASUS TUF Gaming A14 has the same issue as the ROG Zephyrus G14
where it advertises SPS support but doesn't use it.
Signed-off-by: aln8 <aln8un@gmail.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240912073601.65656-1-aln8un@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add touschscreen info for the nanote next (UMPC-03-SR).
After checking with multiple owners the DMI info really is this generic.
Signed-off-by: Ckath <ckath@yandex.ru>
Link: https://lore.kernel.org/r/e8dda83a-10ae-42cf-a061-5d29be0d193a@yandex.ru
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-wmi: Disable OOBE that interferes with backlight control
- panasonic-laptop: Two fixes to SINF array handling
* tag 'platform-drivers-x86-v6.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Disable OOBE experience on Zenbook S 16
platform/x86: panasonic-laptop: Allocate 1 entry extra in the sinf array
platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
|
|
A patch for Qualcomm depends on some fixes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
|
|
On some newer laptops ASUS laptops SPS support is advertised but not
actually used, causing the AMD driver to register as a platform_profile
handler.
If this happens then the asus_wmi driver would error with -EEXIST when
trying to register its own handler leaving the user with a possibly
unusable system. This is especially true for laptops with an MCU that emit
a stream of HID packets, some of which can be misinterpreted as shutdown
signals.
We can safely continue loading the driver instead of bombing out.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240910045443.678145-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add more verbose debug print in the WMI method calls. This helps a lot
with debugging various issues working with regular users as the WMI
methods can be traced now.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240910050507.685069-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This is a platform/x86 library that can only be used on x86 devices.
so it makes sense that it lives under the platform_data/x86/ directory
instead.
No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This is a platform/x86 library that is mostly being used by other
drivers not directly under arch/x86 anyway (with the exception of the
Intel MID setup code) so it makes sense that it lives under the
platform_data/x86/ directory instead.
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The value returned by "HINF" contains press/release information
in bit 7 and a keycode in bits 0-6.
Change the code to retrieve the keycode to use all 7 keycode bits instead
of only using bits 0-3 and add mappings for the higher keycodes used by
the programmable buttons found on newer panasonic toughbook models.
Tested-by: James Harmison <jharmison@redhat.com>
Signed-off-by: James Harmison <jharmison@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240909113227.254470-3-hdegoede@redhat.com
|
|
Since the debugfs_create_dir() never returns a null pointer, checking
the return value for a null pointer is redundant. Since
debugfs_create_file() can deal with a ERR_PTR() style pointer, drop
the check.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20240907031009.3591057-2-lizetao1@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support to ignore all LTRs before suspend and restore the previous
LTR values after suspend. This feature could be turned off with module
parameter ltr_ignore_all_suspend.
LTR value is a mechanism for a device to indicate tolerance to access
the corresponding resource. When system suspends, the resource is not
available and therefore the LTR value could be ignored. Ignoring all
LTR values prevents problematic device from blocking the system to get
to the deepest package state during suspend.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240906184016.268153-1-xi.pardee@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There is still a build failure when the rwrng support is in a loadable
module but the mcu driver is built-in:
arm-linux-gnueabi-ld: drivers/platform/cznic/turris-omnia-mcu-trng.o: in function `omnia_mcu_register_trng':
turris-omnia-mcu-trng.c:(.text.omnia_mcu_register_trng+0x11c): undefined reference to `devm_hwrng_register'
Change the dependency to explicitly disallow the broken
configuration.
Fixes: 41bb142a4028 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240909110417.247453-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The OOBE experience fades the keyboard backlight in & out continuously,
and make the backlight uncontrollable using its device.
Workaround taken from
https://wiki.archlinux.org/index.php?title=ASUS_Zenbook_UM5606&diff=next&oldid=815547
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240909223503.1445779-1-bas@basnieuwenhuizen.nl
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
To update with the latest fixes.
|
|
Switch to use modern name function spi_target_abort().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240910022618.1397-7-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some DSDT-s have an off-by-one bug where the SINF package count is
one higher than the SQTY reported value, allocate 1 entry extra.
Also make the SQTY <-> SINF package count mismatch error more verbose
to help debugging similar issues in the future.
This fixes the panasonic-laptop driver failing to probe() on some
devices with the following errors:
[ 3.958887] SQTY reports bad SINF length SQTY: 37 SINF-pkg-count: 38
[ 3.958892] Couldn't retrieve BIOS data
[ 3.983685] Panasonic Laptop Support - With Macros: probe of MAT0019:00 failed with error -5
Fixes: 709ee531c153 ("panasonic-laptop: add Panasonic Let's Note laptop extras driver v0.94")
Cc: stable@vger.kernel.org
Tested-by: James Harmison <jharmison@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240909113227.254470-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The panasonic laptop code in various places uses the SINF array with index
values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array
is big enough.
Not all panasonic laptops have this many SINF array entries, for example
the Toughbook CF-18 model only has 10 SINF array entries. So it only
supports the AC+DC brightness entries and mute.
Check that the SINF array has a minimum size which covers all AC+DC
brightness entries and refuse to load if the SINF array is smaller.
For higher SINF indexes hide the sysfs attributes when the SINF array
does not contain an entry for that attribute, avoiding show()/store()
accessing the array out of bounds and add bounds checking to the probe()
and resume() code accessing these.
Fixes: e424fb8cc4e6 ("panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240909113227.254470-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
pmc_core_acpi_pm_timer_suspend_resume function
Change incorrect kernel-doc comment to regular comment for the
pmc_core_acpi_pm_timer_suspend_resume function.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409031410.a9beukFc-lkp@intel.com/
Link: https://lore.kernel.org/r/20240904094753.1615549-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Allow to disable ACPI PM Timer on suspend and enable on resume. A
disabled timer helps optimise power consumption when the system is
suspended. On resume the timer is only reactivated if it was activated
prior to suspend, so unless the ACPI PM timer is enabled in the BIOS,
this won't change anything.
The ACPI PM timer is used by Intel's iTCO/wdat_wdt watchdog to drive the
watchdog, so it doesn't need to run during suspend.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812184208.1080710-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmf: ASUS GA403 quirk matching tweak
- dell-smbios: Fix to the init function rollback path
* tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd: pmf: Make ASUS GA403 quirk generic
platform/x86: dell-smbios: Fix error path in dell_smbios_init()
|
|
The gpiod_to_irq() function never returns zero. It returns negative
error codes or a positive IRQ number. Update the checking to check
for negatives.
Fixes: 41bb142a4028 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since the legacy WMI notify handlers are now using the WMI event data
provided by the WMI driver core, they can coexist with modern WMI
driver notify handlers.
Remove the precedence of WMI driver notify handlers and call both
when receiving an event.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240901031055.3030-6-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Since get_event_data() is only called by wmi_get_notify_data(), it
makes sense to merge both functions.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240901031055.3030-5-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Since the WMI driver core now takes care of retrieving the
WMI event data even for legacy WMI notify handlers, this
function is no longer used.
Remove it to prevent WMI drivers from messing up the ACPI
firmware on some machines.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240901031055.3030-4-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The current legacy WMI handlers are susceptible to picking up wrong
WMI event data on systems where different WMI devices share some
notification IDs.
Prevent this by letting the WMI driver core taking care of retrieving
the event data. This also simplifies the legacy WMI handlers and their
implementation inside the WMI driver core.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240901031055.3030-3-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
|
|
When the TPACPI_FAN_WR_ACPI_FANW branch is taken s stays uninitialized
and would be later used in a debug print.
Since the registers are always set to the same two static values inside the
branch s is initialized to 0.
Fixes: 57d0557dfa49 ("platform/x86: thinkpad_acpi: Add Thinkpad Edge E531 fan support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/platform-driver-x86/f99e558d-c62a-41eb-93b3-cf00c016d907@stanley.mountain/
Signed-off-by: Matthias Fetzer <kontakt@matthias-fetzer.de>
Link: https://lore.kernel.org/r/20240903172756.19235-1-kontakt@matthias-fetzer.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix spelling across comments (besides obvious grammar issues):
- spell words in full, e.g., 'img' --> 'image'
- refer to 'gpio-keys' consistently
- refer to acpi_power_off() clearly as to function
- make sure that the first line is only for the affected model(s)
- miscellaneous improvements
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240902150625.2722187-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
First of all, it's a bit counterintuitive to have something like
int err;
...
scoped_guard(...)
err = foo(...);
if (err)
return err;
Second, with a particular kernel configuration and compiler version in
one of such cases the objtool is not happy:
ideapad-laptop.o: warning: objtool: .text.fan_mode_show: unexpected end of section
I'm not an expert on all this, but the theory is that compiler and
linker in this case can't understand that 'result' variable will be
always initialized as long as no error has been returned. Assigning
'result' to a dummy value helps with this. Note, that fixing the
scoped_guard() scope (as per above) does not make issue gone.
That said, assign dummy value and make the scope_guard() clear of its scope.
For the sake of consistency do it in the entire file.
Fixes: 7cc06e729460 ("platform/x86: ideapad-laptop: add a mutex to synchronize VPC commands")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408290219.BrPO8twi-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240829165105.1609180-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
interface
Add the TPMI efficiency latency control fields to the sysfs interface.
The sysfs files are mapped to the TPMI uncore driver via the registered
uncore_read and uncore_write driver callbacks. These fields are not
populated on older non TPMI hardware.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240828153657.1296410-4-tero.kristo@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add efficiency latency control support to the TPMI uncore driver. This
defines two new threshold values for controlling uncore frequency, low
threshold and high threshold. When CPU utilization is below low threshold,
the user configurable floor latency control frequency can be used by the
system. When CPU utilization is above high threshold, the uncore frequency
is increased in 100MHz steps until power limit is reached.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240828153657.1296410-3-tero.kristo@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
While booting, Lenovo 14ARB7 reports 'lenovo-ymc: Unknown key 0 pressed'
warning. This is caused by lenovo_ymc_probe() calling lenovo_ymc_notify()
at probe time to get the initial tablet-mode-switch state and the key-code
lenovo_ymc_notify() reads from the firmware is not initialized at probe
time yet on the Lenovo 14ARB7.
The hardware/firmware does an ACPI notify on the WMI device itself when
it initializes the tablet-mode-switch state later on.
Add 0x0 YMC state to the sparse keymap to silence the warning.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/08ab73bb74c4ad448409f2ce707b1148874a05ce.1724340562.git.soyer@irl.hu
[hdegoede@redhat.com: Reword commit message]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use str_high_low() rather than open coding.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240822130722.1261891-5-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use GPIO_LOOKUP() macro which provides a compound literal
and can be used with dynamic data.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240822130722.1261891-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The dell battery patch added dell_send_request_for_tokenid() and
dell_set_std_token_value(), which encapsulates a very common pattern
when SMBIOS queries are addressed to token->location. This calls them
in various places outside of the dell laptop code, allowing us to delete
a bunch of code.
Also some very minor cleanups:
- mark the kbd init functions as __init
- don't read buffer.output unless dell_send_request() was successful.
- actually return errors from micmute_led_set/mute_led_set instead of
always returning 0.
Only minor behavior changes; the delayed read of buffer.output and
actually returning errors for the brightness_set_blocking hooks.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240820033335.4f68b162@5400
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Dell BIOS allows you to set custom charging modes, which is useful
in particular for extending battery life. This adds support for tweaking
those various settings from Linux via sysfs knobs. One might, for
example, have their laptop plugged into power at their desk the vast
majority of the time and choose fairly aggressive battery-saving
settings (eg, only charging once the battery drops below 50% and only
charging up to 80%). When leaving for a trip, it would be more useful
to instead switch to a standard charging mode (top off at 100%, charge
any time power is available). Rebooting into the BIOS to change the
charging mode settings is a hassle.
For the Custom charging type mode, we reuse the common
charge_control_{start,end}_threshold sysfs power_supply entries. The
BIOS also has a bunch of other charging modes (with varying levels of
usefulness), so this also adds a 'charge_type' sysfs entry that maps the
standard values to Dell-specific ones.
This work is based on a patch by Perry Yuan <perry_yuan@dell.com> and
Limonciello Mario <Mario_Limonciello@Dell.com> submitted back in 2020.
Hans de Goede:
s/charge_type/charge_types/ since charge_types_show() used the new
charge_types power-supply property output format.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240820033005.09e03af1@5400
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The original quirk should match to GA403U so that the full
range of GA403U models can benefit.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240831003905.1060977-1-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In case of error in build_tokens_sysfs(), all the memory that has been
allocated is freed at end of this function. But then free_group() is
called which performs memory deallocation again.
Also, instead of free_group() call, there should be exit_dell_smbios_smm()
and exit_dell_smbios_wmi() calls, since there is initialization, but there
is no release of resources in case of an error.
Fix these issues by replacing free_group() call with
exit_dell_smbios_wmi() and exit_dell_smbios_smm().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 33b9ca1e53b4 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240830065428.9544-1-amishin@t-argos.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
