| Age | Commit message (Collapse) | Author |
|---|
|
The structure iscsi_session naming is used by the iSCSI initiator
driver. Rename the target session to iscsit_session to have more readable
code.
Link: https://lore.kernel.org/r/20220428092939.36768-3-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The structure iscsi_conn naming is used by the iSCSI initiator
driver. Rename the target conn to iscsit_conn to have more readable code.
Link: https://lore.kernel.org/r/20220428092939.36768-2-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The structure iscsi_cmd naming is used by the iSCSI initiator driver.
Rename the target cmd to iscsit_cmd to have more readable code.
Link: https://lore.kernel.org/r/20220428092939.36768-1-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When tcmu_vma_fault() gets a page successfully, before the current context
completes page fault procedure, find_free_blocks() may run and call
unmap_mapping_range() to unmap the page. Assume that when
find_free_blocks() initially completes and the previous page fault
procedure starts to run again and completes, then one truncated page has
been mapped to userspace. But note that tcmu_vma_fault() has gotten a
refcount for the page so any other subsystem won't be able to use the page
unless the userspace address is unmapped later.
If another command subsequently runs and needs to extend dbi_thresh it may
reuse the corresponding slot for the previous page in data_bitmap. Then
though we'll allocate new page for this slot in data_area, no page fault
will happen because we have a valid map and the real request's data will be
lost.
Filesystem implementations will also run into this issue but they usually
lock the page when vm_operations_struct->fault gets a page and unlock the
page after finish_fault() completes. For truncate filesystems lock pages in
truncate_inode_pages() to protect against racing wrt. page faults.
To fix this possible data corruption scenario we can apply a method similar
to the filesystems. For pages that are to be freed, tcmu_blocks_release()
locks and unlocks. Make tcmu_vma_fault() also lock found page under
cmdr_lock. At the same time, since tcmu_vma_fault() gets an extra page
refcount, tcmu_blocks_release() won't free pages if pages are in page fault
procedure, which means it is safe to call tcmu_blocks_release() before
unmap_mapping_range().
With these changes tcmu_blocks_release() will wait for all page faults to
be completed before calling unmap_mapping_range(). And later, if
unmap_mapping_range() is called, it will ensure stale mappings are removed.
Link: https://lore.kernel.org/r/20220421023735.9018-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
valid data
With tape devices, the SCF_TREAT_READ_AS_NORMAL flag is used by the target
subsystem to mark commands which have both data to return as well as sense
data. But with pscsi, SCF_TREAT_READ_AS_NORMAL can be set even if there is
no data to return. The SCF_TREAT_READ_AS_NORMAL flag causes the target core
to call iscsit data-in callbacks even if there is no data, which iscsit
does not support. This results in iscsit going into an error state
requiring recovery and being unable to complete the command to the
initiator.
This issue can be resolved by fixing pscsi to only set
SCF_TREAT_READ_AS_NORMAL if there is valid data to return alongside the
sense data.
Link: https://lore.kernel.org/r/20220427183250.291881-1-djeffery@redhat.com
Fixes: bd81372065fa ("scsi: target: transport should handle st FM/EOM/ILI reads")
Reported-by: Scott Hamilton <scott.hamilton@atos.net>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Target does not support some VPD pages and is very verbose about it.
Sometimes initiators don't bother and just keep sending the same request
from time to time, filling up the logs.
This patch lowers the message priority to debug.
Link: https://lore.kernel.org/r/20220418212622.275516-1-k.shelekhin@yadro.com
Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in 5.18 fixes branch which contains a bunch of fixes required for
the lpfc driver update.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Abstract away implementation details from file systems by providing a
block_device based helper to retrieve the discard granularity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to query the number of sectors support per each discard bio
based on the block device and use this helper to stop various places from
poking into the request_queue to see if discard is supported and if so how
much. This mirrors what is done e.g. for write zeroes as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-24-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to check the FUA flag based on the block_device instead of
having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to check the write cache flag based on the block_device
instead of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to check the nonrot flag based on the block_device instead
of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the proper bdev_discard_alignment helper that accounts for partition
offsets.
Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The SCSI target drivers is a consumer of the block layer and shoul
d generally work on struct block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For block devices, the SCSI target drivers implements UNMAP as calls to
blkdev_issue_discard, which does not guarantee zeroing just because
Write Zeroes is supported.
Note that this does not affect the file backed path which uses
fallocate to punch holes.
Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the magic autofree semantics and require the callers to explicitly
call bio_init to initialize the bio.
This allows bio_free to catch accidental bio_put calls on bio_init()ed
bios as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220406061228.410163-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove pscsi_get_bio and simplify the code flow in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220406061228.410163-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The target driver prevents the users from changing the database root
directory if a target module like ib_srpt has been registered. This makes
it difficult for users to set their preferred database directory if the
module gets loaded during the system boot.
Let the users modify dbroot if there are no registered devices
Link: https://lore.kernel.org/r/20220328103940.19977-1-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull the remaining commits from 5.18/scsi-queue into fixes.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not
take refcount properly and just returns page pointer. When
tcmu_try_get_data_page() returns, the returned page may have been freed by
tcmu_blocks_release().
We need to get_page() under cmdr_lock to avoid concurrent
tcmu_blocks_release().
Link: https://lore.kernel.org/r/20220311132206.24515-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
|
|
The RX/TX threads for iSCSI connection can be scheduled to any online CPUs,
and will not be rescheduled.
When binding other heavy load threads along with iSCSI connection RX/TX
thread to the same CPU, the iSCSI performance will be worse.
Add iscsi/cpus_allowed_list in configfs. The available CPU set of iSCSI
connection RX/TX threads is allowed_cpus & online_cpus. If it is modified,
all RX/TX threads will be rescheduled.
Link: https://lore.kernel.org/r/20220301075500.14266-1-mingzhe.zou@easystack.cn
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let submitters initialize the scmd->allowed field directly instead of
indirecting through struct scsi_request and remove the now superfluous
structure.
Link: https://lore.kernel.org/r/20220224175552.988286-8-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prepare for removing the scsi_request structure by moving the result field
to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-7-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_cmnd
Prepare for removing the scsi_request structure by moving the resid_len
field to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-6-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Just use the sense_buffer field in struct scsi_cmnd for the sense data and
move the sense_len field over to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-5-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that each scsi_request is backed by a scsi_cmnd, there is no need to
indirect the CDB storage. Change all submitters of SCSI passthrough
requests to store the CDB information directly in the scsi_cmnd, and while
doing so allocate the full 32 bytes that cover all Linux supported SCSI
hosts instead of requiring dynamic allocation for > 16 byte CDBs. On
64-bit systems this does not change the size of the scsi_cmnd at all, while
on 32-bit systems it slightly increases it for now, but that increase will
be made up by the removal of the remaining scsi_request fields.
Link: https://lore.kernel.org/r/20220224175552.988286-4-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Copy directly from the se_cmd CDB to the one in the scsi_request. This
temporarily limits the pscsi backend to supporting only up to 16 byte CDBs,
but this restriction will be lifted later in this series.
Link: https://lore.kernel.org/r/20220224175552.988286-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make cmd_ring_size changeable similar to the way it is done for
max_data_area_mb. The reason is that our tcmu client will create thousands
of tcmu instances, and this will consume lots of mem with default 8Mb cmd
ring size for every backstore.
One can change the value by typing:
echo "cmd_ring_size_mb=N" > control
The "N" is a integer between 1 to 8, if set 1, the cmd ring can hold about
6k cmds(tcmu_cmd_entry about 176 byte) at least.
The value is printed when doing:
cat info
In addition, a new readonly attribute 'cmd_ring_size_mb' returns the value
in read.
Link: https://lore.kernel.org/r/1644978109-14885-1-git-send-email-kanie@linux.alibaba.com
Reviewed-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass the block_device and operation that we plan to use this bio for to
bio_alloc_bioset to optimize the assigment. NULL/0 can be passed, both
for the passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
iscsit_tpg_check_network_portal() has nested for_each loops and is supposed
to return true when a match is found. However, the tpg loop will still
continue after existing the tpg_np loop. If this tpg_np is not the last the
match value will be changed.
Break the outer loop after finding a match and make sure the np under each
tpg is unique.
Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cn
Signed-off-by: ZouMingzhe <mingzhe.zou@easystack.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait
given that it is unused now. Also convert the boolean at_head parameter
to actually use the bool type while touching the prototype.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The "item" pointer is always going to be valid pointer and does not need to
be checked.
But if "item" were NULL then item_to_lun() would not return a NULL, but
instead, the container_of() pointer math would return a value in the error
pointer range. This confuses static checkers since it looks like a NULL vs
IS_ERR() bug.
Delete the bogus checks.
Link: https://lore.kernel.org/r/20211118084900.GA24550@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the sparse warnings about t10_alua_tg_pt_gp accesses in
target_core_spc.c caused by commit 7324f47d4293 ("scsi: target: Replace
lun_tg_pt_gp_lock with rcu in I/O path")
That commit replaced the lun_tg_pt_gp_lock use in the I/O path, but it
didn't update the INQUIRY code.
Link: https://lore.kernel.org/r/20211117213928.8634-1-michael.christie@oracle.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
scsi: scsi_debug: Don't call kcalloc() if size arg is zero
scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
scsi: scsi_ioctl: Validate command size
scsi: ufs: ufshpb: Properly handle max-single-cmd
scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
scsi: sr: Remove duplicate assignment
scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
scsi: ufs: ufs-exynos: Factor out priv data init
scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
scsi: ufs: ufs-exynos: Add setup_clocks callback
scsi: ufs: ufs-exynos: Add refclkout_stop control
scsi: ufs: ufs-exynos: Simplify drv_data retrieval
scsi: ufs: ufs-exynos: Change pclk available max value
scsi: ufs: Add quirk to enable host controller without PH configuration
scsi: ufs: Add quirk to handle broken UIC command
...
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
|
|
Pull kiocb->ki_complete() cleanup from Jens Axboe:
"This removes the res2 argument from kiocb->ki_complete().
Only the USB gadget code used it, everybody else passes 0. The USB
guys checked the user gadget code they could find, and everybody just
uses res as expected for the async interface"
* tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-block:
fs: get rid of the res2 iocb->ki_complete argument
usb: remove res2 argument from gadget code completions
|
|
git://git.kernel.dk/linux-block
Pull QUEUE_FLAG_SCSI_PASSTHROUGH removal from Jens Axboe:
"This contains a series leading to the removal of the
QUEUE_FLAG_SCSI_PASSTHROUGH queue flag"
* tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block:
block: remove blk_{get,put}_request
block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
block: remove the initialize_rq_fn blk_mq_ops method
scsi: add a scsi_alloc_request helper
bsg-lib: initialize the bsg_job in bsg_transport_sg_io_fn
nfsd/blocklayout: use ->get_unique_id instead of sending SCSI commands
sd: implement ->get_unique_id
block: add a ->get_unique_id method
|
|
These are now pointless wrappers around blk_mq_{alloc,free}_request,
so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211025070517.1548584-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently TMF commands are removed from de_device.dev_tmf_list at the very
end of se_cmd lifecycle. However, se_lun unlinks from se_cmd upon a command
status (response) being queued in transport layer. This means that LUN and
backend device can be deleted in the meantime and a panic will occur:
target_tmr_work()
cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire
transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun
- // - // - // -
<<<--- lun remove
<<<--- core backend device remove
- // - // - // -
qlt_handle_abts_completion()
tfo->free_mcmd()
transport_generic_free_cmd()
target_put_sess_cmd()
core_tmr_release_req() {
if (dev) { // backend device, can not be null
spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH
Call Trace:
NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0
LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod]
Call Trace:
(unreliable)
0x0
target_put_sess_cmd+0x2a0/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx]
process_one_work+0x2c4/0x5c0
worker_thread+0x88/0x690
For the iSCSI protocol this is easily reproduced:
- Send some SCSI sommand
- Send Abort of that command over iSCSI
- Remove LUN on target
- Send next iSCSI command to acknowledge the Abort_Response
- Target panics
There is no need to keep the command in tmr_list until response completion,
so move the removal from tmr_list from the response completion to the
response queueing when the LUN is unlinked. Move the removal from state
list too as it is a subject to the same race condition.
Link: https://lore.kernel.org/r/20211018135753.15297-1-d.bogdanov@yadro.com
Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new helper that calls blk_get_request and initializes the
scsi_request to avoid the indirect call through ->.initialize_rq_fn.
Note that this makes the pktcdvd driver depend on the SCSI core, but
given that only SCSI devices support SCSI passthrough requests that
is not a functional change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use the %pg format specifier instead.
Link: https://lore.kernel.org/r/20211018065052.1822500-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When userspace changes the LUN's ALUA group, it will set the LUN's group to
NULL then to the new group. Before the new group is set,
target_alua_state_check() will return 0 and allow the I/O to execute. This
has us skip the NULL stage, and just swap in the new group.
Link: https://lore.kernel.org/r/20210930020422.92578-6-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We are only holding the lun_tg_pt_gp_lock in target_alua_state_check() to
make sure tg_pt_gp is not freed from under us while we copy the state,
delay, ID values. We can instead use RCU here to access the tg_pt_gp.
With this patch IOPs can increase up to 10% for jobs like:
fio --filename=/dev/sdX --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64 --numjobs=N
when there are multiple sessions (running that fio command to each /dev/sdX
or using multipath and there are over 8 paths), or more than 8 queues for
the loop or vhost with multiple threads case and numjobs > 8.
Link: https://lore.kernel.org/r/20210930020422.92578-5-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's
still accessed via configfs. Its release must go through the normal
configfs/refcount process.
The max alua_tg_pt_gps_count check should probably have been done in
core_alua_allocate_tg_pt_gp(), but with the current code userspace could
have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff.
Then it could have deleted a group with an ID set, and then set the ID for
that extra group and it would work ok.
It's unlikely, but just in case this patch continues to allow that type of
behavior, and just fixes the kfree() while in use bug.
Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
