summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2024-06-04usb: host: oxu210hp: remove unused struct 'ehci_dbg_port'Dr. David Alan Gilbert
'ehci_dbg_port' is unused in oxu210hp-hcd.c since it's original commit b92a78e582b1 ("usb host: Oxford OXU210HP HCD driver.") when it was in a separate header. Remove it. Note, that this structure, and some others in the driver are mostly clones of include/linux/usb/ehci_def.h. Someone with the hardware to be able to test it might be able to remove a lot more structs as well and just use that header. Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org> Link: https://lore.kernel.org/r/20240529210002.106369-1-linux@treblig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb: typec: ucsi: Add new notification bitsDiogo Ivo
Newer UCSI versions defined additional notification bits that can be enabled by the PPM. Add their definitions and convert all definitions to BIT_ULL() as we now cross the 32-bit boundary. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/3filrg6mbh6m3galir7ew5juakd25uvksimr7mqd7uc5td3xza@fdvxcewozqeh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb: dwc2: gadget: Don't write invalid mapped sg entries into dma_desc with ↵Peng Hongchi
iommu enabled When using dma_map_sg() to map the scatterlist with iommu enabled, the entries in the scatterlist can be mergerd into less but longer entries in the function __finalise_sg(). So that the number of valid mapped entries is actually smaller than ureq->num_reqs,and there are still some invalid entries in the scatterlist with dma_addr=0xffffffff and len=0. Writing these invalid sg entries into the dma_desc can cause a data transmission error. The function dma_map_sg() returns the number of valid map entries and the return value is assigned to usb_request::num_mapped_sgs in function usb_gadget_map_request_by_dev(). So that just write valid mapped entries into dma_desc according to the usb_request::num_mapped_sgs, and set the IOC bit if it's the last valid mapped entry. This patch poses no risk to no-iommu situation, cause ureq->num_mapped_sgs equals ureq->num_sgs while using dma_direct_map_sg() to map the scatterlist whith iommu disabled. Signed-off-by: Peng Hongchi <hongchi.peng@siengine.com> Link: https://lore.kernel.org/r/20240523100315.7226-1-hongchi.peng@siengine.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb: cdns3-ti: Add workaround for Errata i2409Roger Quadros
TI USB2 PHY is known to have a lockup issue on very short suspend intervals. Enable the Suspend Residency quirk flag to workaround this as described in Errata i2409 [1]. [1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240516044537.16801-3-r-gunasekaran@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb: cdns3: Add quirk flag to enable suspend residencyRoger Quadros
Some platforms (e.g. ti,j721e-usb, ti,am64-usb) require this bit to be set to workaround a lockup issue with PHY short suspend intervals [1]. Add a platform quirk flag to indicate if Suspend Residency should be enabled. [1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf i2409 - USB: USB2 PHY locks up due to short suspend Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240516044537.16801-2-r-gunasekaran@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usbip: Don't submit special requests twiceSimon Holesch
Skip submitting URBs, when identical requests were already sent in tweak_special_requests(). Instead call the completion handler directly to return the result of the URB. Even though submitting those requests twice should be harmless, there are USB devices that react poorly to some duplicated requests. One example is the ChipIdea controller implementation in U-Boot: The second SET_CONFIGURATION request makes U-Boot disable and re-enable all endpoints. Re-enabling an endpoint in the ChipIdea controller, however, was broken until U-Boot commit b272c8792502 ("usb: ci: Fix gadget reinit"). Signed-off-by: Simon Holesch <simon@holesch.de> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Hongren Zheng <i@zenithal.me> Tested-by: Hongren Zheng <i@zenithal.me> Link: https://lore.kernel.org/r/20240519141922.171460-1-simon@holesch.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb-storage: Optimize scan delay more preciselyNorihiko Hama
Current storage scan delay is reduced by the following old commit. a4a47bc03fe5 ("Lower USB storage settling delay to something more reasonable") It means that delay is at least 'one second', or zero with delay_use=0. 'one second' is still long delay especially for embedded system but when delay_use is set to 0 (no delay), still error observed on some USB drives. So delay_use should not be set to 0 but 'one second' is quite long. Especially for embedded system, it's important for end user how quickly access to USB drive when it's connected. That's why we have a chance to minimize such a constant long delay. This patch optimizes scan delay more precisely to minimize delay time but not to have any problems on USB drives by extending module parameter 'delay_use' in milliseconds internally. The parameter 'delay_use' optionally supports in milliseconds if it ends with 'ms'. It makes the range of value to 1 / 1000 in internal 32-bit value but it's still enough to set the delay time. By default, delay time is 'one second' for backward compatibility. For example, it seems to be good by changing delay_use=100ms, that is 100 millisecond delay without issues for most USB pen drives. Signed-off-by: Norihiko Hama <Norihiko.Hama@alpsalpine.com> Link: https://lore.kernel.org/r/20240515004339.29892-1-Norihiko.Hama@alpsalpine.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb: typec: nb7vpq904m: Remove unneeded indentationR Sundar
In function nb7vpq904m_parse_data_lanes_mapping(), the "if (ep)" condition is basically the entire function. Making the code a bit more readable by inverting the condition so that the function returns immediately if there is no "ep". Signed-off-by: R Sundar <prosunofficial@gmail.com> Link: https://lore.kernel.org/r/20240506162829.5223-1-prosunofficial@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb-storage: alauda: Check whether the media is initializedShichao Lai
The member "uzonesize" of struct alauda_info will remain 0 if alauda_init_media() fails, potentially causing divide errors in alauda_read_data() and alauda_write_lba(). - Add a member "media_initialized" to struct alauda_info. - Change a condition in alauda_check_media() to ensure the first initialization. - Add an error check for the return value of alauda_init_media(). Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support") Reported-by: xingwei lee <xrivendell7@gmail.com> Reported-by: yue sun <samsun1006219@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Shichao Lai <shichaorai@gmail.com> Link: https://lore.kernel.org/r/20240526012745.2852061-1-shichaorai@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb: typec: ucsi: Ack also failed Get Error commandsHeikki Krogerus
It is possible that also the GET_ERROR command fails. If that happens, the command completion still needs to be acknowledged. Otherwise the interface will be stuck until it's reset. Reported-by: Ammy Yi <ammy.yi@intel.com> Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240531104653.1303519-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04kcov, usb: disable interrupts in kcov_remote_start_usb_softirqAndrey Konovalov
After commit 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue"), usb_giveback_urb_bh() runs in the BH workqueue with interrupts enabled. Thus, the remote coverage collection section in usb_giveback_urb_bh()-> __usb_hcd_giveback_urb() might be interrupted, and the interrupt handler might invoke __usb_hcd_giveback_urb() again. This breaks KCOV, as it does not support nested remote coverage collection sections within the same context (neither in task nor in softirq). Update kcov_remote_start/stop_usb_softirq() to disable interrupts for the duration of the coverage collection section to avoid nested sections in the softirq context (in addition to such in the task context, which are already handled). Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Closes: https://lore.kernel.org/linux-usb/0f4d1964-7397-485b-bc48-11c01e2fcbca@I-love.SAKURA.ne.jp/ Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2 Suggested-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue") Cc: stable@vger.kernel.org Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20240527173538.4989-1-andrey.konovalov@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb: typec: tcpm: Ignore received Hard Reset in TOGGLING stateKyle Tso
Similar to what fixed in Commit a6fe37f428c1 ("usb: typec: tcpm: Skip hard reset when in error recovery"), the handling of the received Hard Reset has to be skipped during TOGGLING state. [ 4086.021288] VBUS off [ 4086.021295] pending state change SNK_READY -> SNK_UNATTACHED @ 650 ms [rev2 NONE_AMS] [ 4086.022113] VBUS VSAFE0V [ 4086.022117] state change SNK_READY -> SNK_UNATTACHED [rev2 NONE_AMS] [ 4086.022447] VBUS off [ 4086.022450] state change SNK_UNATTACHED -> SNK_UNATTACHED [rev2 NONE_AMS] [ 4086.023060] VBUS VSAFE0V [ 4086.023064] state change SNK_UNATTACHED -> SNK_UNATTACHED [rev2 NONE_AMS] [ 4086.023070] disable BIST MODE TESTDATA [ 4086.023766] disable vbus discharge ret:0 [ 4086.023911] Setting usb_comm capable false [ 4086.028874] Setting voltage/current limit 0 mV 0 mA [ 4086.028888] polarity 0 [ 4086.030305] Requesting mux state 0, usb-role 0, orientation 0 [ 4086.033539] Start toggling [ 4086.038496] state change SNK_UNATTACHED -> TOGGLING [rev2 NONE_AMS] // This Hard Reset is unexpected [ 4086.038499] Received hard reset [ 4086.038501] state change TOGGLING -> HARD_RESET_START [rev2 HARD_RESET] Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso <kyletso@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240520154858.1072347-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb: typec: tcpm: fix use-after-free case in tcpm_register_source_capsAmit Sunil Dhamne
There could be a potential use-after-free case in tcpm_register_source_caps(). This could happen when: * new (say invalid) source caps are advertised * the existing source caps are unregistered * tcpm_register_source_caps() returns with an error as usb_power_delivery_register_capabilities() fails This causes port->partner_source_caps to hold on to the now freed source caps. Reset port->partner_source_caps value to NULL after unregistering existing source caps. Fixes: 230ecdf71a64 ("usb: typec: tcpm: unregister existing source caps before re-registration") Cc: stable@vger.kernel.org Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Ondrej Jirman <megi@xff.cz> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240514220134.2143181-1-amitsd@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selectedJohn Ernberg
If no other USB HCDs are selected when compiling a small pure virutal machine, the Xen HCD driver cannot be built. Fix it by traversing down host/ if CONFIG_USB_XEN_HCD is selected. Fixes: 494ed3997d75 ("usb: Introduce Xen pvUSB frontend (xen hcd)") Cc: stable@vger.kernel.org # v5.17+ Signed-off-by: John Ernberg <john.ernberg@actia.se> Link: https://lore.kernel.org/r/20240517114345.1190755-1-john.ernberg@actia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04usb: typec: ucsi: glink: increase max ports for x1e80100Johan Hovold
The new X Elite (x1e80100) platform has three ports so increase the maximum so that all ports can be registered. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240603100007.10236-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"Peter Chen
This reverts commit 22ffd399e6e7aa18ae0314278ed0b7f05f8ab679. People report this commit causes the driver defer probed, and never back to work[1][2]. [1] https://lore.kernel.org/lkml/20240407011913.GA168730@nchen-desktop/T/#mc2b93bc11a8b01ec7cd0d0bf6b0b03951d9ef751 [2] https://lore.kernel.org/lkml/20240407011913.GA168730@nchen-desktop/T/#me87d9a2a76c07619d83b3879ea14780da89fbbbf Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Wouter Franken <wouter@franken-peeters.be> Signed-off-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240517023648.3459188-1-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-22Merge tag 'usb-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.10-rc1. Nothing hugely earth-shattering, just constant forward progress for hardware support of new devices and cleanups over the drivers. Included in here are: - Thunderbolt / USB 4 driver updates - typec driver updates - dwc3 driver updates - gadget driver updates - uss720 driver id additions and fixes (people use USB->arallel port devices still!) - onboard-hub driver rename and additions for new hardware - xhci driver updates - other small USB driver updates and additions for quirks and api changes All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub usb: fotg210: Add missing kernel doc description usb: dwc3: core: Fix unused variable warning in core driver usb: typec: tipd: rely on i2c_get_match_data() usb: typec: tipd: fix event checking for tps6598x usb: typec: tipd: fix event checking for tps25750 dt-bindings: usb: qcom,dwc3: fix interrupt max items usb: fotg210: Use *-y instead of *-objs in Makefile usb: phy: tegra: Replace of_gpio.h by proper one usb: typec: ucsi: displayport: Fix potential deadlock usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration usb: musc: Remove unused list 'buffers' usb: dwc3: Wait unconditionally after issuing EndXfer command usb: gadget: u_audio: Clear uac pointer when freed. usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind. dt-bindings: usb: dwc3: Add QDU1000 compatible usb: core: Remove the useless struct usb_devmap which is just a bitmap MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry USB: usb_parse_endpoint: ignore reserved bits usb: xhci: compact 'trb_in_td()' arguments ...
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The major update (which causes a conflict with block, see below) is Christoph removing the queue limits and their associated block helpers. The remaining patches are assorted minor fixes and deprecated function updates plus a bit of constification" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: mpi3mr: Sanitise num_phys scsi: lpfc: Copyright updates for 14.4.0.2 patches scsi: lpfc: Update lpfc version to 14.4.0.2 scsi: lpfc: Add support for 32 byte CDBs scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading scsi: lpfc: Update logging of protection type for T10 DIF I/O scsi: lpfc: Change default logging level for unsolicited CT MIB commands scsi: target: Remove unused list 'device_list' scsi: iscsi: Remove unused list 'connlist_err' scsi: ufs: exynos: Add support for Tensor gs101 SoC scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata scsi: ufs: exynos: Allow max frequencies up to 267Mhz scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option scsi: ufs: dt-bindings: exynos: Add gs101 compatible scsi: qla2xxx: Fix debugfs output for fw_resource_count scsi: qedf: Ensure the copied buf is NUL terminated scsi: bfa: Ensure the copied buf is NUL terminated ...
2024-05-11usb: fotg210: Add missing kernel doc descriptionAndy Shevchenko
kernel-doc validator is not happy: warning: Function parameter or struct member 'fotg' not described in 'fotg210_vbus' Add missing description. Fixes: 3e679bde529e ("usb: fotg210-udc: Implement VBUS session") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240510152641.2421298-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-11usb: dwc3: core: Fix unused variable warning in core driverKrishna Kurapati
While fixing a merge conflict in linux-next, hw_mode variable was left unused. Remove the unused variable in hs_phy_setup call. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202405030439.AH8NR0Mg-lkp@intel.com/ Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240506074939.1833835-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: tipd: rely on i2c_get_match_data()Javier Carrasco
The first thing i2c_get_match_data() does is calling device_get_match_data(), which already checks if there is a fwnode. Remove explicit usage of device_get_match_data() as it is already included in i2c_get_match_data(). Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-3-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: tipd: fix event checking for tps6598xJavier Carrasco
The current interrupt service routine of the tps6598x only reads the first 64 bits of the INT_EVENT1 and INT_EVENT2 registers, which means that any event above that range will be ignored, leaving interrupts unattended. Moreover, those events will not be cleared, and the device will keep the interrupt enabled. This issue has been observed while attempting to load patches, and the 'ReadyForPatch' field (bit 81) of INT_EVENT1 was set. Given that older versions of the tps6598x (1, 2 and 6) provide 8-byte registers, a mechanism based on the upper byte of the version register (0x0F) has been included. The manufacturer has confirmed [1] that this byte is always 0 for older versions, and either 0xF7 (DH parts) or 0xF9 (DK parts) is returned in newer versions (7 and 8). Read the complete INT_EVENT registers to handle all interrupts generated by the device and account for the hardware version to select the register size. Link: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1346521/tps65987d-register-command-to-distinguish-between-tps6591-2-6-and-tps65987-8 [1] Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Cc: stable@vger.kernel.org Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-2-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: tipd: fix event checking for tps25750Javier Carrasco
In its current form, the interrupt service routine of the tps25750 checks the event flags in the lowest 64 bits of the interrupt event register (event[0]), but also in the upper part (event[1]). Given that all flags are defined as BIT() or BIT_ULL(), they are restricted to the first 64 bits of the INT_EVENT1 register. Including the upper part of the register can lead to false positives e.g. if the event 64 bits above the one being checked is set, but the one being checked is not. Restrict the flag checking to the first 64 bits of the INT_EVENT1 register. Fixes: 7e7a3c815d22 ("USB: typec: tps6598x: Add TPS25750 support") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-1-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: fotg210: Use *-y instead of *-objs in MakefileAndy Shevchenko
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240508150406.1378672-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: ucsi: displayport: Fix potential deadlockHeikki Krogerus
The function ucsi_displayport_work() does not access the connector, so it also must not acquire the connector lock. This fixes a potential deadlock scenario: ucsi_displayport_work() -> lock(&con->lock) typec_altmode_vdm() dp_altmode_vdm() dp_altmode_work() typec_altmode_enter() ucsi_displayport_enter() -> lock(&con->lock) Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240507134316.161999-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: typec: qcom-pmic-typec: split HPD bridge alloc and registrationDmitry Baryshkov
If a probe function returns -EPROBE_DEFER after creating another device there is a change of ending up in a probe deferral loop, (see commit fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER"). In case of the qcom-pmic-typec driver the tcpm_register_port() function looks up external resources (USB role switch and inherently via called typec_register_port() USB-C muxes, switches and retimers). In order to prevent such probe-defer loops caused by qcom-pmic-typec driver, use the API added by Johan Hovold and move HPD bridge registration to the end of the probe function. The devm_drm_dp_hpd_bridge_add() is called at the end of the probe function after all TCPM start functions. This is done as a way to overcome a different problem, the DRM subsystem can not properly cope with the DRM bridges being destroyed once the bridge is attached. Having this function call at the end of the probe function prevents possible DRM bridge device creation followed by destruction in case one of the TCPM start functions returns an error. Reported-by: Caleb Connolly <caleb.connolly@linaro.org> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240424-qc-pmic-typec-hpd-split-v4-1-f7e10d147443@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: musc: Remove unused list 'buffers'Dr. David Alan Gilbert
Remove the unused list head 'buffers' and the 'struct free_record' which is also unused below it. To me it looks like this has always been unused, but I've not dug into why. Build test only. Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org> Link: https://lore.kernel.org/r/20240504150315.77598-1-linux@treblig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10usb: dwc3: Wait unconditionally after issuing EndXfer commandPrashanth K
Currently all controller IP/revisions except DWC3_usb3 >= 310a wait 1ms unconditionally for ENDXFER completion when IOC is not set. This is because DWC_usb3 controller revisions >= 3.10a supports GUCTL2[14: Rst_actbitlater] bit which allows polling CMDACT bit to know whether ENDXFER command is completed. Consider a case where an IN request was queued, and parallelly soft_disconnect was called (due to ffs_epfile_release). This eventually calls stop_active_transfer with IOC cleared, hence send_gadget_ep_cmd() skips waiting for CMDACT cleared during EndXfer. For DWC3 controllers with revisions >= 310a, we don't forcefully wait for 1ms either, and we proceed by unmapping the requests. If ENDXFER didn't complete by this time, it leads to SMMU faults since the controller would still be accessing those requests. Fix this by ensuring ENDXFER completion by adding 1ms delay in __dwc3_stop_active_transfer() unconditionally. Cc: stable@vger.kernel.org Fixes: b353eb6dc285 ("usb: dwc3: gadget: Skip waiting for CMDACT cleared during endxfer") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240502044103.1066350-1-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-10Merge 6.9-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well, and resolve a merge conflict in drivers/usb/dwc3/core.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04usb: gadget: u_audio: Clear uac pointer when freed.Chris Wulff
This prevents use of a stale pointer if functions are called after g_cleanup that shouldn't be. This doesn't fix any races, but converts a possibly silent kernel memory corruption into an obvious NULL pointer dereference report. Fixes: eb9fecb9e69b ("usb: gadget: f_uac2: split out audio core") Signed-off-by: Chris Wulff <chris.wulff@biamp.com> Link: https://lore.kernel.org/stable/CO1PR17MB54194226DA08BFC9EBD8C163E1172%40CO1PR17MB5419.namprd17.prod.outlook.com Link: https://lore.kernel.org/r/CO1PR17MB54194226DA08BFC9EBD8C163E1172@CO1PR17MB5419.namprd17.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04usb: gadget: u_audio: Fix race condition use of controls after free during ↵Chris Wulff
gadget unbind. Hang on to the control IDs instead of pointers since those are correctly handled with locks. Fixes: 8fe9a03f4331 ("usb: gadget: u_audio: Rate ctl notifies about current srate (0=stopped)") Fixes: c565ad07ef35 ("usb: gadget: u_audio: Support multiple sampling rates") Fixes: 02de698ca812 ("usb: gadget: u_audio: add bi-directional volume and mute support") Signed-off-by: Chris Wulff <chris.wulff@biamp.com> Link: https://lore.kernel.org/stable/CO1PR17MB5419C2BF44D400E4E620C1ADE1172%40CO1PR17MB5419.namprd17.prod.outlook.com Link: https://lore.kernel.org/r/CO1PR17MB5419C2BF44D400E4E620C1ADE1172@CO1PR17MB5419.namprd17.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04usb: core: Remove the useless struct usb_devmap which is just a bitmapChristophe JAILLET
struct usb_devmap is really just a bitmap. No need to have a dedicated structure for that. Simplify code and use DECLARE_BITMAP() directly instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1d818575ff7a1e8317674aecf761ee23c89fdc84.1714815990.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-03USB: usb_parse_endpoint: ignore reserved bitsOliver Neukum
Reading bEndpointAddress the spec tells is that: b7 is direction, which must be ignored b6:4 are reserved which are to be set to zero b3:0 are the endpoint address In order to be backwards compatible with possible future versions of USB we have to be ready with devices using those bits. That means that we also have to ignore them like we do with the direction bit. In consequence the only illegal address you can encoding in four bits is endpoint zero, for which no descriptor must exist. Hence the check for exceeding the upper limit on endpoint addresses is removed. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20240502115259.31076-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: compact 'trb_in_td()' argumentsNiklas Neronin
Pass pointer to the TD (struct xhci_td *) directly, instead of its components separately. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-19-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: remove duplicate TRB_TO_SLOT_ID() callsNiklas Neronin
Remove unnecessary repeated calls to TRB_TO_SLOT_ID(). The slot ID is stored in the 'slot_id' variable at the function's start. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-18-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01xhci: pci: Use PCI_VENDOR_ID_RENESASAndy Shevchenko
Instead of plain hexadecimal, use already defined PCI_VENDOR_ID_RENESAS. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-17-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01xhci: pci: Group out Thunderbolt xHCI IDsAndy Shevchenko
It's better to keep track on Thunderbolt xHCI IDs in a separate group. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-16-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01xhci: pci: Use full names in PCI IDs for Intel platformsAndy Shevchenko
There are three out of many Intel platforms that are using TLAs instead of the full names in the PCI IDs. Modify them accordingly. This also fixes the logic of grouping as seemed to be by an LSB byte of the ID. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-15-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: remove goto 'cleanup' in handle_tx_event()Niklas Neronin
By removing the goto 'cleanup' statement, and replacing it with 'continue', 'break' and 'return', helps simplify the code and further showcase in which case the while loop iterates. This change prepares for the comprehensive handle_tx_event() rework. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-14-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: replace goto with return when possible in handle_tx_event()Niklas Neronin
Simplifying the handle_tx_event() function by addressing the complexity of its while loop. Replaces specific 'goto cleanup' statements with 'return' statements, applicable only where 'ep->skip' is set to 'false', ensuring loop termination. The original while loop, combined with 'goto cleanup', adds unnecessary complexity. This change aims to untangle the loop's logic, facilitating a more straightforward review of the upcoming comprehensive rework. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-13-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: remove 'handling_skipped_tds' from handle_tx_event()Niklas Neronin
When handle_tx_event() encounters a COMP_MISSED_SERVICE_ERROR or COMP_NO_PING_RESPONSE_ERROR event, it moves to 'goto cleanup'. Here, it sets a flag, 'handling_skipped_tds', based on conditions that exclude these two error events. Subsequently, the process evaluates the loop that persists as long as 'handling_skipped_tds' remains true. However, since 'trb_comp_code' does not change after its assignment, if it indicates either of the two error conditions, the loop terminates immediately. To simplify this process and enhance clarity, the modification involves returning immediately upon detecting COMP_MISSED_SERVICE_ERROR or COMP_NO_PING_RESPONSE_ERROR. This adjustment allows for the direct use of 'ep->skip', removing the necessity for the 'handling_skipped_tds' flag. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-12-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: prevent potential failure in handle_tx_event() for Transfer ↵Niklas Neronin
events without TRB Some transfer events don't always point to a TRB, and consequently don't have a endpoint ring. In these cases, function handle_tx_event() should not proceed, because if 'ep->skip' is set, the pointer to the endpoint ring is used. To prevent a potential failure and make the code logical, return after checking the completion code for a Transfer event without TRBs. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-11-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01xhci: remove XHCI_TRUST_TX_LENGTH quirkMathias Nyman
If this quirk was set then driver would treat transfer events with 'Success' completion code as 'Short packet' if there were untransferred bytes left. This is so common that turn it into default behavior. xhci_warn_ratelimited() is no longer used after this, so remove it. A success event with untransferred bytes left doesn't always mean a misbehaving controller. If there was an error mid a multi-TRB TD it's allowed to issue a success event for the last TRB in that TD. See xhci 1.2 spec 4.9.1 Transfer Descriptors "Note: If an error is detected while processing a multi-TRB TD, the xHC shall generate a Transfer Event for the TRB that the error was detected on with the appropriate error Condition Code, then may advance to the next TD. If in the process of advancing to the next TD, a Transfer TRB is encountered with its IOC flag set, then the Condition Code of the Transfer Event generated for that Transfer TRB should be Success, because there was no error actually associated with the TRB that generated the Event. However, an xHC implementation may redundantly assert the original error Condition Code." Co-developed-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01xhci: improve PORTSC register debugging outputMathias Nyman
Print the full hex value of PORTSC register in addition to the human readable decoded string while debugging PORTSC value. If PORTSC value is 0xffffffff then don't decode it. This lets us inspect Rsvd bits of PORTSC. Same is done for USBSTS register values. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: use array_size() when allocating and freeing memoryNiklas Neronin
Replace size_mul() with array_size() in memory allocation and freeing processes, it fits better semantically. Macro array_size() is identical to size_mult(), which clamps the max size, so it's imperative that array_size() is used when freeing said memory. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: remove redundant variable 'erst_size'Niklas Neronin
'erst_size' represents the maximum capacity of entries that ERST can hold, while 'num_entries' indicates the actual number of entries currently held in the ERST. These two values are identical because the xhci driver does not support ERST expansion. Thus, 'erst_size' is removed. Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: address off-by-one in xhci_num_trbs_free()Niklas Neronin
Reduce the number of do-while loops by 1. The number of loops should be number of segment + 1, the +1 is in case deq and enq are on the same segment. But due to the use of a do-while loop, the expression is evaluated after executing the loop, thus the loop is executed 1 extra time. Changing the do-while loop expression from "<=" to "<", reduces the loop amount by 1. The expression "<=" would also work if it was a while loop instead of a do-while loop. Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-01usb: xhci: improve debug message in xhci_ring_expansion_needed()Niklas Neronin
Address debug message inaccuracies in xhci_ring_expansion_needed(). Specifically, remove the portion of the debug message that indicates the number of enqueue TRBs to be added to the dequeue segment. This part of the message may mislead and the calculated value is incorrect. Given that this value is not of significant importance and the statement is not consistently accurate, it has been omitted. The specific issues with the debug message that this commit resolves: - The calculation of the number of TRBs is incorrect. The current calculation erroneously includes the link TRB, which is reserved. Furthermore, the calculated number of TRBs can exceed the dequeue segment, resulting in a misleading debug message. - The current phrasing suggests that "ring expansion by X is needed, adding X TRBs moves enqueue Y TRBs into the dequeue segment". The intended message, however, is "IF the ring is NOT expanded by X, THEN adding X TRBs moves enqueue Y TRBs into the dequeue segment". Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240429140245.3955523-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-19 00:53:02 +0000