summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-03-25stmmac: Remove pcim_* functions for driver detachPhilipp Stanner
Functions prefixed with "pcim_" are managed devres functions which perform automatic cleanup once the driver unloads. It is, thus, not necessary to call any cleanup functions in remove() callbacks. Remove the pcim_ cleanup function calls in the remove() callbacks. Signed-off-by: Philipp Stanner <phasta@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Tested-by: Henry Chen <chenx97@aosc.io> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250324092928.9482-5-phasta@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25stmmac: loongson: Remove surplus loopPhilipp Stanner
loongson_dwmac_probe() contains a loop which doesn't have an effect, because it tries to call pcim_iomap_regions() with the same parameters several times. The break statement at the loop's end furthermore ensures that the loop only runs once anyways. Remove the surplus loop. Signed-off-by: Philipp Stanner <phasta@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Tested-by: Henry Chen <chenx97@aosc.io> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250324092928.9482-4-phasta@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25Merge tag 'irq-drivers-2025-03-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq driver updates from Thomas Gleixner: - Support for hard indices on RISC-V. The hart index identifies a hart (core) within a specific interrupt domain in RISC-V's Priviledged Architecture. - Rework of the RISC-V MSI driver This moves the driver over to the generic MSI library and solves the affinity problem of unmaskable PCI/MSI controllers. Unmaskable PCI/MSI controllers are prone to lose interrupts when the MSI message is updated to change the affinity because the message write consists of three 32-bit subsequent writes, which update address and data. As these writes are non-atomic versus the device raising an interrupt, the device can observe a half written update and issue an interrupt on the wrong vector. This is mitiated by a carefully orchestrated step by step update and the observation of an eventually pending interrupt on the CPU which issues the update. The algorithm follows the well established method of the X86 MSI driver. - A new driver for the RISC-V Sophgo SG2042 MSI controller - Overhaul of the Renesas RZQ2L driver Simplification of the probe function by using devm_*() mechanisms, which avoid the endless list of error prone gotos in the failure paths. - Expand the Renesas RZV2H driver to support RZ/G3E SoCs - A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to ensure that the addressing is limited to the lower 32-bit of the physical address space. - Add support for the Allwinner AS23 NMI controller - Expand the IMX irqsteer driver to handle up to 960 input interrupts - The usual small updates, cleanups and device tree changes * tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) irqchip/imx-irqsteer: Support up to 960 input interrupts irqchip/sunxi-nmi: Support Allwinner A523 NMI controller dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller irqchip/davinci-cp-intc: Remove public header irqchip/renesas-rzv2h: Add RZ/G3E support irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP} irqchip/renesas-rzv2h: Update TSSR_TIEN macro irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable irqchip/renesas-rzv2h: Use devm_pm_runtime_enable() irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted() irqchip/renesas-rzv2h: Simplify rzv2h_icu_init() irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type() dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC riscv: sophgo: dts: Add msi controller for SG2042 irqchip: Add the Sophgo SG2042 MSI interrupt controller dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI ...
2025-03-25t blameBluetooth: btintel: Fix leading white spaceKiran K
Remove the unwanted leading whitespace. Fixes: 6ed83047389c ("Bluetooth: btintel_pcie: Setup buffers for firmware traces") Fixes: bb3569ac3604 ("Bluetooth: btintel: Add DSBR support for ScP") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel: Add support to configure TX powerVijay Satija
BRDS - Bluetooth Regulatory Domain Specific absorption rate Bluetooth has regulatory limitations which prohibit or allow usage of certain bands or channels as well as limiting Tx power. The Tx power values can be configured in ACPI table. This patch reads from ACPI entry configures the controller accordingly. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removalSean Wang
Ensure interrupts are not re-enabled when the IRQ handler has already been removed. This prevents unexpected IRQ handler execution due to stale or unhandled interrupts. Modify btmtksdio_txrx_work to check if bdev->func->irq_handler exists before calling sdio_writel to enable interrupts. Co-developed-by: Pedro Tsai <pedro.tsai@mediatek.com> Signed-off-by: Pedro Tsai <pedro.tsai@mediatek.com> Co-developed-by: Felix Freimann <felix.freimann@mediatek.com> Signed-off-by: Felix Freimann <felix.freimann@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btmtk: Remove the resetting step before downloading the fwHao Qin
Remove the resetting step before downloading the fw, as it may cause other usb devices to fail to initialise when connected during boot on kernels 6.11 and newer. Signed-off-by: Hao Qin <hao.qin@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: hci_vhci: Mark Sync Flow Control as supportedLuiz Augusto von Dentz
This sets HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED which indicates that controllers created by vhci driver support Sync Flow Control. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pci: Fix build warningLuiz Augusto von Dentz
This fixes the following warning: drivers/bluetooth/btintel_pcie.c:695:20: warning: unused function 'btintel_pcie_in_rom' [-Wunused-function] 695 | static inline bool btintel_pcie_in_rom(struct btintel_pcie_data *data) | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Trigger device coredump on hardware exceptionKiran K
Driver dumps device core dump on firmware exception. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Add support to set BD addressNeeraj Sanjay Kale
This adds support for setting BD address during hci registration. NXP FW does not allow vendor commands unless it receives a reset command after FW download and initialization done. As a workaround, the .set_bdaddr callback function will first send the HCI reset command, followed by the actual vendor command to set BD address. The driver checks for the local-bd-address property in device tree, and if preset, it sets the HCI_QUIRK_USE_BDADDR_PROPERTY quirk. With this quirk set, the driver's set_bdaddr callback function is called after FW download is complete and before HCI initialization, which sends the hci reset and 3f 22 commands. During initialization, kernel reads the newly set BD address from the controller. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Johan Korsnes <johan.korsnes@remarkable.no> Signed-off-by: Kristian Krohn <kristian.krohn@remarkable.no> Tested-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Add support for HCI coredump featureNeeraj Sanjay Kale
This adds support for Bluetooth Coredump feature to BTNXPUART driver to collect FW dumps on demand, or in case FW goes in a bad state. To trigger manual FW dump, following command can be used: echo 1 > /sys/class/bluetooth/hci0/device/coredump Once FW dump is complete, it can be written to a file: cat /sys/class/bluetooth/hci0/devcoredump/data > fw_dump While FW dump is in progress, any HCI command will return -EBUSY. After FW dump is complete, driver will give HCI_NXP_IND_RESET command which soft-resets the chip, allowing FW re-download. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Move vendor specific initialization to .post_initNeeraj Sanjay Kale
This moves change baudrate and power save vendor commands from nxp_setup() to nxp_post_init(). This also moves the baudrate restore logic from nxp_serdev_remove() to nxp_shutdown() which ensure baudrate is restored even when HCI dev is down, preventing baudrate mismatch between host and controller when device is probed again next time. In case of removal when the hdev is up and running, we have to call the shutdown procedure explicitly before unregistering the hdev. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Co-developed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Add support for device coredumpKiran K
1. Driver registers device coredump callback 2. Dumps firmware traces as part of coredump Co-developed-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btusb: Fix regression in the initialization of fake Bluetooth ↵Pedro Nishiyama
controllers Set HCI_READ_VOICE_SETTING and HCI_READ_PAGE_SCAN_TYPE as broken. Once the min/max length of the commands began to be asserted, these fake controllers can no longer be initialized because they return a smaller report for these commands. This affects various fake controllers reusing the 0A12:0001 VID/PID. Fixes: c8992cffbe74 ("Bluetooth: hci_event: Use of a function table to handle Command Complete") Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Read hardware exception dataKiran K
On hardware error, controller writes hardware error event and optional vendor specific hci events in device memory in TLV format and raises MSIX interrupt. Driver reads the device memory and passes the events to the stack for further processing. Co-developed-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Setup buffers for firmware tracesKiran K
This patch allocates the host memory which is used by controller to dump the firmware traces. The memory needs to be shared with controller via context information. Co-developed-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-25Bluetooth: qca: add WCN3950 supportDmitry Baryshkov
WCN3950 is another example of the WCN39xx BT/WiFI family of chips. It requires different firmware files and has different current requirements, so add it as a separate SoC type. The firmware for these chips has been recently added to the linux-firmware repository and will be a part of the upcoming release: - qca/cmbtfw12.tlv - qca/cmbtfw13.tlv - qca/cmnv12.bin - qca/cmnv13.bin - qca/cmnv13s.bin - qca/cmnv13t.bin Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: qca: simplify WCN399x NVM loadingDmitry Baryshkov
The WCN399x code has two separate cases for loading the NVM data. In preparation to adding support for WCN3950, which also requires similar quirk, split the "variant" to be specified explicitly and merge two snprintfs into a single one. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25bluetooth: btnxpuart: Support for controller wakeup gpio configLoic Poulain
When using the out-of-band WAKE_IN and WAKE_OUT pins, we have to tell the firmware which pins to use (from controller point of view). This allows to report remote wakeup support when WAKE_OUT(c2h) is configured. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: hci_qca: use the power sequencer for wcn6750Janaki Ramaiah Thota
Older boards are having entry "enable-gpios" in dts, we can safely assume latest boards which are supporting PMU node enrty will support power sequencer. Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btusb: Add 2 HWIDs for MT7922Jiande Lu
Add below HWIDs for MediaTek MT7922 USB Bluetooth chip. VID 0x0489, PID 0xe152 VID 0x0489, PID 0xe153 Patch has been tested successfully and controller is recognized device pair successfully. MT7922 module bring up message as below. Bluetooth: Core ver 2.22 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512 Bluetooth: hci0: Device setup in 2284925 usecs Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. Bluetooth: hci0: AOSP extensions version v1.00 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: MGMT ver 1.22 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: hci_vhci: convert timeouts to secs_to_jiffies()Easwar Hariharan
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced secs_to_jiffies(). As the value here is a multiple of 1000, use secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication. This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with the following Coccinelle rules: @depends on patch@ expression E; @@ -msecs_to_jiffies(E * 1000) +secs_to_jiffies(E) -msecs_to_jiffies(E * MSEC_PER_SEC) +secs_to_jiffies(E) Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: hci_uart: Fix another race during initializationArseniy Krasnov
Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'. Possible race is when someone calls 'hci_tty_uart_close()' after this bit is set, but 'hci_uart_register_dev()' wasn't done. This leads to access to uninitialized fields. To fix it let's set this bit after device was registered (as before patch c411c62cc133) and to fix previous problem let's add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to perform power up without original bit set (pls see commit c411c62cc133). Crash backtrace from syzbot report: RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline] RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936 Call Trace: <TASK> skb_queue_purge include/linux/skbuff.h:3364 [inline] mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100 hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557 tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline] tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613 tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781 tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690 tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861 __fput+0x86/0x2a0 fs/file_table.c:450 task_work_run+0x82/0xb0 kernel/task_work.c:239 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218 do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/ Fixes: 366ceff495f9 ("Bluetooth: hci_uart: fix race during initialization") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: hci_uart: fix race during initializationArseniy Krasnov
'hci_register_dev()' calls power up function, which is executed by kworker - 'hci_power_on()'. This function does access to bluetooth chip using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'. Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after 'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will be executed before setting this bit. In that case HCI init logic fails. Patch moves setting of 'HCI_UART_PROTO_READY' before calling function 'hci_uart_register_dev()'. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel: Add DSBR support for ScPKiran K
Add DSBR support for Scorpious Peak cores. Refer commit eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") for details about DSBR. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: Fix code style warningJeremy Clifton
Output of checkpatch shows warning: drivers/bluetooth/bfusb.c:368: WARNING: braces {} are not necessary for single statement blocks Remove braces for single line statement. Signed-off-by: Jeremy Clifton <deaner92@yahoo.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785xZijun Hu
Add 13 USB device IDs for Qualcomm WCN785x, and these IDs are extracted from Windows driver inf file for various types of WoS (Windows on Snapdragon) laptop. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25virtio_net: Allocate rss_hdr with devresAkihiko Odaki
virtnet_probe() lacks the code to free rss_hdr in its error path. Allocate rss_hdr with devres so that it will be automatically freed. Fixes: 86a48a00efdf ("virtio_net: Support dynamic rss indirection table size") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Link: https://patch.msgid.link/20250321-virtio-v2-4-33afb8f4640b@daynix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25virtio_net: Use new RSS config structsAkihiko Odaki
The new RSS configuration structures allow easily constructing data for VIRTIO_NET_CTRL_MQ_RSS_CONFIG as they strictly follow the order of data for the command. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Link: https://patch.msgid.link/20250321-virtio-v2-3-33afb8f4640b@daynix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25virtio_net: Fix endian with virtio_net_ctrl_rssAkihiko Odaki
Mark the fields of struct virtio_net_ctrl_rss as little endian as they are in struct virtio_net_rss_config, which it follows. Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Link: https://patch.msgid.link/20250321-virtio-v2-2-33afb8f4640b@daynix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25Bluetooth: btintel_pcie: Add device id of Whale PeakKiran K
Add device of Whale Peak. Output of sudo lspci -v -s 00:14.7: 00:14.7 Bluetooth: Intel Corporation Device e476 Subsystem: Intel Corporation Device 0011 Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 11 Memory at 11011c30000 (64-bit, non-prefetchable) [size=16K] Capabilities: [c8] Power Management version 3 Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [80] MSI-X: Enable+ Count=32 Masked- Capabilities: [100] Latency Tolerance Reporting Kernel driver in use: btintel_pcie Kernel modules: btintel_pcie Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel: Add support for Intel Scorpius PeakKiran K
Add support for Scorpious Peak core. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btusb: Add new VID/PID for WCN785xDorian Cruveiller
Add VID 0489 & PID e10d for Qualcomm WCN785x USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e10d Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btusb: mediatek: Add err code to btusb claim iso printoutDouglas Anderson
Add the error code to the message "Failed to claim iso interface". That allows us to know which error case usb_driver_claim_interface() hit. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25octeontx2-af: mcs: Remove redundant 'flush_workqueue()' callsChen Ni
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250324080854.408188-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25Merge tag 'irq-msi-2025-03-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI irq updates from Thomas Gleixner: - Switch the MSI descriptor locking to guards - Replace the broken PCI/TPH implementation, which lacks any form of serialization against concurrent modifications with a properly serialized mechanism in the PCI/MSI core code - Replace the MSI descriptor abuse in the SCSI/UFS Qualcom driver with dedicated driver internal storage * tag 'irq-msi-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Rename msi_[un]lock_descs() scsi: ufs: qcom: Remove the MSI descriptor abuse PCI/TPH: Replace the broken MSI-X control word update PCI/MSI: Provide a sane mechanism for TPH PCI: hv: Switch MSI descriptor locking to guard() PCI/MSI: Switch to MSI descriptor locking to guard() NTB/msi: Switch MSI descriptor locking to lock guard() soc: ti: ti_sci_inta_msi: Switch MSI descriptor locking to guard() genirq/msi: Use lock guards for MSI descriptor locking cleanup: Provide retain_ptr() genirq/msi: Make a few functions static
2025-03-25net: mdio: mdio-i2c: Add support for single-byte SMBus operationsMaxime Chevallier
PHYs that are within copper SFP modules have their MDIO bus accessible through address 0x56 (usually) on the i2c bus. The MDIO-I2C bridge is desgned for 16 bits accesses, but we can also perform 8bits accesses by reading/writing the high and low bytes sequentially. This commit adds support for this type of accesses, thus supporting smbus controllers such as the one in the VSC8552. This was only tested on Copper SFP modules that embed a Marvell 88e1111 PHY. Tested-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250322075745.120831-3-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25net: phy: sfp: Add support for SMBus module accessMaxime Chevallier
The SFP module's eeprom and internals are accessible through an i2c bus. It is possible that the SFP might be connected to an SMBus-only controller, such as the one found in some PHY devices in the VSC85xx family. Introduce a set of sfp read/write ops that are going to be used if the i2c bus is only capable of doing smbus byte accesses. As Single-byte SMBus transaction go against SFF-8472 and breaks the atomicity for diagnostics data access, hwmon is disabled in the case of SMBus access. Moreover, as this may cause other instabilities, print a warning at probe time to indicate that the setup may be unreliable because of the hardware design. As hwmon may be disabled for both broken EEPROM and smbus, the warnings are udpated accordingly. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250322075745.120831-2-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25Merge tag 'ipsec-next-2025-03-24' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2025-03-24 1) Prevent setting high order sequence number bits input in non-ESN mode. From Leon Romanovsky. 2) Support PMTU handling in tunnel mode for packet offload. From Leon Romanovsky. 3) Make xfrm_state_lookup_byaddr lockless. From Florian Westphal. 4) Remove unnecessary NULL check in xfrm_lookup_with_ifid(). From Dan Carpenter. * tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid() xfrm: state: make xfrm_state_lookup_byaddr lockless xfrm: check for PMTU in tunnel mode for packet offload xfrm: provide common xdo_dev_offload_ok callback implementation xfrm: rely on XFRM offload xfrm: simplify SA initialization routine xfrm: delay initialization of offload path till its actually requested xfrm: prevent high SEQ input in non-ESN mode ==================== Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25net: au1000_eth: Mark au1000_ReleaseDB() staticJohan Korsnes
This fixes the following build warning: ``` drivers/net/ethernet/amd/au1000_eth.c:574:6: warning: no previous prototype for 'au1000_ReleaseDB' [-Wmissing-prototypes] 574 | void au1000_ReleaseDB(struct au1000_private *aup, struct db_dest *pDB) | ^~~~~~~~~~~~~~~~ ``` Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250323190450.111241-1-johan.korsnes@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25net: fix NULL pointer dereference in l3mdev_l3_rcvWang Liang
When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan. Suggested-by: David Ahern <dsahern@kernel.org> Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes") Signed-off-by: Wang Liang <wangliang74@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250321090353.1170545-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25ibmvnic: Use kernel helpers for hex dumpsNick Child
Previously, when the driver was printing hex dumps, the buffer was cast to an 8 byte long and printed using string formatters. If the buffer size was not a multiple of 8 then a read buffer overflow was possible. Therefore, create a new ibmvnic function that loops over a buffer and calls hex_dump_to_buffer instead. This patch address KASAN reports like the one below: ibmvnic 30000003 env3: Login Buffer: ibmvnic 30000003 env3: 01000000af000000 <...> ibmvnic 30000003 env3: 2e6d62692e736261 ibmvnic 30000003 env3: 65050003006d6f63 ================================================================== BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic] Read of size 8 at addr c0000001331a9aa8 by task ip/17681 <...> Allocated by task 17681: <...> ibmvnic_login+0x2f0/0xffc [ibmvnic] ibmvnic_open+0x148/0x308 [ibmvnic] __dev_open+0x1ac/0x304 <...> The buggy address is located 168 bytes inside of allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf) <...> ================================================================= ibmvnic 30000003 env3: 000000000033766e Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250320212951.11142-1-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25Merge tag 'wireless-next-2025-03-20' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== More features for 6.15, major changes: * cfg80211/mac80211: fix and enable link reconfiguration * rtw88: support RTL8814AE/RTL8814AU * mt7996: preparations for MLO * ath12k: continued work on MLO * iwlwifi: add new iwlmld sub-driver/op-mode for some current and future devices * wfx: wowlan support * tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (311 commits) wifi: mt76: mt7996: fix locking in mt7996_mac_sta_rc_work() wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table wifi: mt76: mt792x: re-register CHANCTX_STA_CSA only for the mt7921 series wifi: mt76: mt7996: Update mt7996_tx to MLO support wifi: mt76: mt7996: rework mt7996_ampdu_action to support MLO wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO wifi: mt76: mt7996: set vif default link_id adding/removing vif links wifi: mt76: mt7996: rework mt7996_mcu_beacon_inband_discov to support MLO wifi: mt76: mt7996: rework mt7996_mcu_add_obss_spr to support MLO wifi: mt76: mt7996: rework mt7996_net_fill_forward_path to support MLO wifi: mt76: mt7996: rework mt7996_update_mu_group to support MLO wifi: mt76: mt7996: rework mt7996_mac_sta_poll to support MLO wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO wifi: mt76: mt7996: remove mt7996_mac_enable_rtscts() wifi: mt76: mt7996: rework mt7996_sta_hw_queue_read to support MLO wifi: mt76: mt7996: rework mt7996_set_hw_key to support MLO wifi: mt76: mt7996: Add mt7996_sta_link to mt7996_mcu_add_bss_info signature wifi: mt76: mt7996: rework mt7996_sta_set_4addr and mt7996_sta_set_decap_offload to support MLO wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO wifi: mt76: mt7996: Rely on wcid_to_sta in mt7996_mac_add_txs_skb() ... ==================== Link: https://patch.msgid.link/20250320131106.33266-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25net: stmmac: dwmac-rk: Add initial support for RK3528 integrated PHYJonas Karlman
Rockchip RK3528 (and RV1106) has a different integrated PHY compared to the integrated PHY on RK3228/RK3328. Current powerup/down operation is not compatible with the integrated PHY found in these newer SoCs. Add operations to powerup/down the integrated PHY found in RK3528. Use helpers that can be used by other GMAC variants in the future. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250319214415.3086027-6-jonas@kwiboo.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25net: stmmac: dwmac-rk: Add integrated_phy_powerdown operationJonas Karlman
Rockchip RK3528 (and RV1106) has a different integrated PHY compared to the integrated PHY on RK3228/RK3328. Current powerup/down operation is not compatible with the integrated PHY found in these newer SoCs. Add a new integrated_phy_powerdown operation and change the call chain for integrated_phy_powerup to prepare support for the integrated PHY found in these newer SoCs. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250319214415.3086027-5-jonas@kwiboo.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25net: stmmac: dwmac-rk: Move integrated_phy_powerup/down functionsJonas Karlman
Rockchip RK3528 (and RV1106) has a different integrated PHY compared to the integrated PHY on RK3228/RK3328. Current powerup/down operation is not compatible with the integrated PHY found in these SoCs. Move the rk_gmac_integrated_phy_powerup/down functions to top of the file to prepare for them to be called directly by a GMAC variant specific powerup/down operation. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250319214415.3086027-4-jonas@kwiboo.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25net: stmmac: dwmac-rk: Add GMAC support for RK3528David Wu
Rockchip RK3528 has two Ethernet controllers based on Synopsys DWC Ethernet QoS IP. Add initial support for the RK3528 GMAC variant. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patch.msgid.link/20250319214415.3086027-3-jonas@kwiboo.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25bonding: check xdp prog when set bond modeWang Liang
Following operations can trigger a warning[1]: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode balance-rr ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp ip netns exec ns1 ip link set bond0 type bond mode broadcast ip netns del ns1 When delete the namespace, dev_xdp_uninstall() is called to remove xdp program on bond dev, and bond_xdp_set() will check the bond mode. If bond mode is changed after attaching xdp program, the warning may occur. Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode with xdp program attached is not good. Add check for xdp program when set bond mode. [1] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930 Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ... RSP: 0018:ffffc90000063d80 EFLAGS: 00000282 RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48 RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8 R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000 FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0 Call Trace: <TASK> ? __warn+0x83/0x130 ? unregister_netdevice_many_notify+0x8d9/0x930 ? report_bug+0x18e/0x1a0 ? handle_bug+0x54/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? unregister_netdevice_many_notify+0x8d9/0x930 ? bond_net_exit_batch_rtnl+0x5c/0x90 cleanup_net+0x237/0x3d0 process_one_work+0x163/0x390 worker_thread+0x293/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0xec/0x1e0 ? __pfx_kthread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver") Signed-off-by: Wang Liang <wangliang74@huawei.com> Acked-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250321044852.1086551-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25net: stmmac: block PHY RXC clock-stopRussell King (Oracle)
The DesignWare core requires the receive clock to be running during certain operations. Ensure that we block PHY RXC clock-stop during these operations. This is a best-efforts change - not everywhere can be covered by this because of net's core locking, which means we can't access the MDIO bus to configure the PHY to disable RXC clock-stop in certain areas. These are marked with FIXME comments. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tvO6p-008Vjz-Qy@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-19 02:09:15 +0000