summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-03staging: vt6656: limit reg output to block sizeMalcolm Priestley
vnt_control_out appears to fail when BBREG is greater than 64 writes. Create new function that will relay an array in no larger than the indicated block size. It appears that this command has always failed but was ignored by driver until the introduction of error checking. Cc: stable <stable@vger.kernel.org> # v5.3+ Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/a41f0601-df46-ce6e-ab7c-35e697946e2a@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: vt6656: correct return of vnt_init_registers.Malcolm Priestley
The driver standard error returns remove bool false conditions. Cc: stable <stable@vger.kernel.org> # v5.3+ Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/072ec0b3-425f-277e-130c-1e3a116c90d6@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03staging: vt6656: Fix non zero logical return of, usb_control_msgMalcolm Priestley
Starting with commit 59608cb1de1856 ("staging: vt6656: clean function's error path in usbpipe.c") the usb control functions have returned errors throughout driver with only logical variable checking. However, usb_control_msg return the amount of bytes transferred this means that normal operation causes errors. Correct the return function so only return zero when transfer is successful. Cc: stable <stable@vger.kernel.org> # v5.3+ Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/08e88842-6f78-a2e3-a7a0-139fec960b2b@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03optee: Fix multi page dynamic shm pool allocSumit Garg
optee_shm_register() expected pages to be passed as an array of page pointers rather than as an array of contiguous pages. So fix that via correctly passing pages as per expectation. Fixes: a249dd200d03 ("tee: optee: Fix dynamic shm pool allocations") Reported-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-01-03agp: remove unused variable arqsz in agp_3_5_enable()Yunfeng Ye
This patch fix the following warning: drivers/char/agp/isoch.c: In function ‘agp_3_5_enable’: drivers/char/agp/isoch.c:322:13: warning: variable ‘arqsz’ set but not used [-Wunused-but-set-variable] u32 isoch, arqsz; ^~~~~ Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-03agp: remove unused variable mcapndxYunfeng Ye
This patch fix the following warning: drivers/char/agp/isoch.c: In function ‘agp_3_5_isochronous_node_enable’: drivers/char/agp/isoch.c:87:5: warning: variable ‘mcapndx’ set but not used [-Wunused-but-set-variable] u8 mcapndx; ^~~~~~~ Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-03spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent callswuxu.wu
dw_spi_irq() and dw_spi_transfer_one concurrent calls. I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null, dw->len==4, and dw->tx_end==1. When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one may concurrent visit dw_spi, so I think dw_spi structure lack of protection. Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq, store dw rx/tx instructions and other cores handle irq load dw rx/tx instructions may out of order. [ 1025.321302] Call trace: ... [ 1025.321319] __crash_kexec+0x98/0x148 [ 1025.321323] panic+0x17c/0x314 [ 1025.321329] die+0x29c/0x2e8 [ 1025.321334] die_kernel_fault+0x68/0x78 [ 1025.321337] __do_kernel_fault+0x90/0xb0 [ 1025.321346] do_page_fault+0x88/0x500 [ 1025.321347] do_translation_fault+0xa8/0xb8 [ 1025.321349] do_mem_abort+0x68/0x118 [ 1025.321351] el1_da+0x20/0x8c [ 1025.321362] dw_writer+0xc8/0xd0 [ 1025.321364] interrupt_transfer+0x60/0x110 [ 1025.321365] dw_spi_irq+0x48/0x70 ... Signed-off-by: wuxu.wu <wuxu.wu@huawei.com> Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-03regulator: bd70528: Remove .set_ramp_delay for bd70528_ldo_opsAxel Lin
The .set_ramp_delay should be for bd70528_buck_ops only. Setting .set_ramp_delay for for bd70528_ldo_ops causes problem because BD70528_MASK_BUCK_RAMP (0x10) overlaps with BD70528_MASK_LDO_VOLT (0x1f). So setting ramp_delay for LDOs may change the voltage output, fix it. Fixes: 99ea37bd1e7d ("regulator: bd70528: Support ROHM BD70528 regulator block") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20200101022406.15176-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-02Merge tag 'linux-can-fixes-for-5.5-20200102' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-01-02 this is a pull request of 9 patches for net/master. The first 5 patches target all the tcan4x5x driver. The first 3 patches of them are by Dan Murphy and Sean Nyekjaer and improve the device initialization (power on, reset and get device out of standby before register access). The next patch is by Dan Murphy and disables the INH pin device-state if the GPIO is unavailable. The last patch for the tcan4x5x driver is by Gustavo A. R. Silva and fixes an inconsistent PTR_ERR check in the tcan4x5x_parse_config() function. The next patch is by Oliver Hartkopp and targets the generic CAN device infrastructure. It ensures that an initialized headroom in outgoing CAN sk_buffs (e.g. if injected by AF_PACKET). The last 2 patches are by Johan Hovold and fix the kvaser_usb and gs_usb drivers by always using the current alternate setting not blindly the first one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02net: freescale: fec: Fix ethtool -d runtime PMAndrew Lunn
In order to dump the FECs registers the clocks have to be ticking, otherwise a data abort occurs. Add calls to runtime PM so they are enabled and later disabled. Fixes: e8fcfcd5684a ("net: fec: optimize the clock management to save power") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02vxlan: fix tos value before xmitHangbin Liu
Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02net: dsa: mv88e6xxx: force cmode write on 6141/6341Baruch Siach
mv88e6xxx_port_set_cmode() relies on cmode stored in struct mv88e6xxx_port to skip cmode update when the requested value matches the cached value. It turns out that mv88e6xxx_port_hidden_write() might change the port cmode setting as a side effect, so we can't rely on the cached value to determine that cmode update in not necessary. Force cmode update in mv88e6341_port_set_cmode(), to make serdes configuration work again. Other mv88e6xxx_port_set_cmode() callers keep the current behaviour. This fixes serdes configuration of the 6141 switch on SolidRun Clearfog GT-8K. Fixes: 7a3007d22e8 ("net: dsa: mv88e6xxx: fully support SERDES on Topaz family") Reported-by: Denis Odintsov <d.odintsov@traviangames.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02USB-PD tcpm: bad warning+size, PPS adaptersDouglas Gilbert
Augmented Power Delivery Objects (A)PDO_s are used by USB-C PD power adapters to advertize the voltages and currents they support. There can be up to 7 PDO_s but before PPS (programmable power supply) there were seldom more than 4 or 5. Recently Samsung released an optional PPS 45 Watt power adapter (EP-TA485) that has 7 PDO_s. It is for the Galaxy 10+ tablet and charges it quicker than the adapter supplied at purchase. The EP-TA485 causes an overzealous WARN_ON to soil the log plus it miscalculates the number of bytes to read. So this bug has been there for some time but goes undetected for the majority of USB-C PD power adapters on the market today that have 6 or less PDO_s. That may soon change as more USB-C PD adapters with PPS come to market. Tested on a EP-TA485 and an older Lenovo PN: SA10M13950 USB-C 65 Watt adapter (without PPS and has 4 PDO_s) plus several other PD power adapters. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191230033544.1809-1-dgilbert@interlog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-02can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling ↵Florian Faber
to irq mode Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: gs_usb: gs_usb_probe(): use descriptors of current altsettingJohan Hovold
Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by: Johan Hovold <johan@kernel.org> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: kvaser_usb: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Christer Beskow <chbe@kvaser.com> Cc: Nicklas Johansson <extnj@kvaser.com> Cc: Martin Henriksson <mh@kvaser.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_parse_config(): fix inconsistent IS_ERR and PTR_ERRGustavo A. R. Silva
Fix inconsistent IS_ERR and PTR_ERR in tcan4x5x_parse_config(). The proper pointer to be passed as argument is tcan4x5x->device_wake_gpio. This bug was detected with the help of Coccinelle. Fixes: 2de497356955 ("can: tcan45x: Make wake-up GPIO an optional GPIO") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_parse_config(): Disable the INH pin device-state ↵Dan Murphy
GPIO is unavailable If the device state GPIO is not connected to the host then disable the INH output from the TCAN device per section 8.3.5 of the data sheet. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_parse_config(): reset device before register accessSean Nyekjaer
It's a good idea to reset a ip-block/spi device before using it, this patch will reset the device. And a generic reset function if needed elsewhere. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_can_probe(): turn on the power before parsing the configDan Murphy
The tcan4x5x_parse_config() function now performs action on the device either reading or writing and a reset. If the devive has a switchable power supppy (i.e. regulator is managed) it needs to be turned on. So turn on the regulator if available. If the parsing fails, turn off the regulator. Fixes: 2de497356955 ("can: tcan45x: Make wake-up GPIO an optional GPIO") Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before ↵Sean Nyekjaer
register access The m_can tries to detect if Non ISO Operation is available while in standby mode, this function results in the following error: | tcan4x5x spi2.0 (unnamed net_device) (uninitialized): Failed to init module | tcan4x5x spi2.0: m_can device registered (irq=84, version=32) | tcan4x5x spi2.0 can2: TCAN4X5X successfully initialized. When the tcan device comes out of reset it goes in standby mode. The m_can driver tries to access the control register but fails due to the device being in standby mode. So this patch will put the tcan device in normal mode before the m_can driver does the initialization. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: stable@vger.kernel.org Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02Merge tag 'usb-serial-5.5-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.5-rc5 Here's a couple of new modem device ids, including a new quirk for devices that expect zero-length packets. Due to the holidays, only the first one has been in linux-next and with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.5-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add ZLP support for 0x1bc7/0x9010 USB: serial: option: add Telit ME910G1 0x110a composition
2020-01-02Merge tag 'phy-for-5.5-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 5.5-rc *) Fix error path in cpcap-usb driver when no host driver is loaded to avoid debug serial console from stop working *) Fix to let USB host idle before switching to UART mode in cpcap-usb driver in order to avoid flakey enumeration next time *) Prevent USB line glitches from waking up modem by enabling the USB lines (GPIO mux) after configuring the cpcap-usb PHY *) Improve host vs docked mode detection in cpcap-usb PHY driver to keep VBUS enabled in host mode *) Fix to prevent cpcap-usb PHY driver from enabling the PHY twice *) Increase PHY ready timeout in qcom-qmp PHY as it takes more than 1ms to initialize *) Round clock rate down to closest 1000 Hz in phy-rockchip-inno-hdmi to prevent wrong pixel clock to be used and result in no-signal when configuring a mode on RK3328 * tag 'phy-for-5.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz phy: cpcap-usb: Drop extra write to usb2 register phy: cpcap-usb: Improve host vs docked mode detection phy: cpcap-usb: Prevent USB line glitches from waking up modem phy: mapphone-mdm6600: Fix uninitialized status value regression phy: cpcap-usb: Fix flakey host idling and enumerating of devices phy: qcom-qmp: Increase PHY ready timeout phy: cpcap-usb: Fix error path when no host driver is loaded
2020-01-02clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent orderSamuel Holland
According to the BSP source code, both the AR100 and R_APB2 clocks have PLL_PERIPH0 as mux index 3, not 2 as it was on previous chips. The pre- divider used for PLL_PERIPH0 should be changed to index 3 to match. This was verified by running a rough benchmark on the AR100 with various clock settings: | mux | pre-divider | iterations/second | clock source | |=====|=============|===================|==============| | 0 | 0 | 19033 (stable) | osc24M | | 2 | 5 | 11466 (unstable) | iosc/osc16M | | 2 | 17 | 11422 (unstable) | iosc/osc16M | | 3 | 5 | 85338 (stable) | pll-periph0 | | 3 | 17 | 27167 (stable) | pll-periph0 | The relative performance numbers all match up (with pll-periph0 running at its default 600MHz). Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02clk: sunxi-ng: h6-r: Simplify R_APB1 clock definitionSamuel Holland
Like the APB0 clock on previous chips, this is a simple single-parent clock with an M divider. Use the equivalent helper macro instead of writing out the whole clock description manually. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02clk: sunxi-ng: sun8i-r: Fix divider on APB0 clockSamuel Holland
According to the BSP source code, the APB0 clock on the H3 and H5 has a normal M divider, not a power-of-two divider. This matches the hardware in the A83T (as described in both the BSP source code and the manual). Since the A83T and H3/A64 clocks are actually the same, we can merge the definitions. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02Merge tag 'amd-drm-fixes-5.5-2020-01-01' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.5-2020-01-01: amdgpu: - ATPX regression fix - SMU metrics table locking fixes - gfxoff fix for raven - RLC firmware loading stability fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200101151307.5242-1-alexander.deucher@amd.com
2020-01-02Merge tag 'drm-misc-fixes-2019-12-31' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes -sun4i: Fix double-free in connector/encoder cleanup (Stefan) -malidp: Make vtable static (Ben) Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191231152503.GA46740@art_vandelay
2020-01-02Merge tag 'mediatek-drm-fixes-5.5' of ↵Dave Airlie
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes Mediatek DRM fixes for Linux 5.5 Signed-off-by: Dave Airlie <airlied@redhat.com> From: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/1577762298.23194.2.camel@mtksdaap41
2020-01-01drm/amdgpu: correct RLC firmwares loading sequenceEvan Quan
Per confirmation with RLC firmware team, the RLC should be unhalted after all RLC related firmwares uploaded. However, in fact the RLC is unhalted immediately after RLCG firmware uploaded. And that may causes unexpected PSP hang on loading the succeeding RLC save restore list related firmwares. So, we correct the firmware loading sequence to load RLC save restore list related firmwares before RLCG ucode. That will help to get around this issue. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann. 2) Fix port selection on big endian in nft_tproxy, from Phil Sutter. 3) Fix precision tracking for unbound scalars in bpf verifier, from Daniel Borkmann. 4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio Messina. 5) Do not perform a neigh confirmation during a pmtu update over a tunnel, from Hangbin Liu. 6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur. 7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean. 8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from Geert Uytterhoeven * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename() net/sched: add delete_empty() to filters and use it in cls_flower tcp: Fix highest_sack and highest_sack_seq ptp: fix the race between the release of ptp_clock and cdev net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation net: dsa: sja1105: Remove restriction of zero base-time for taprio offload net: dsa: sja1105: Really make the PTP command read-write net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot cxgb4/cxgb4vf: fix flow control display for auto negotiation mlxsw: spectrum: Use dedicated policer for VRRP packets mlxsw: spectrum_router: Skip loopback RIFs during MAC validation net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device net_sched: sch_fq: properly set sk->sk_pacing_status bnx2x: Fix accounting of vlan resources among the PFs bnx2x: Use appropriate define for vlan credit of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy net: phy: aquantia: add suspend / resume ops for AQR105 dpaa_eth: fix DMA mapping leak ...
2019-12-31phy/rockchip: inno-hdmi: round clock rate down to closest 1000 HzJonas Karlman
Commit 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework") changed what rate clk_round_rate() is called with, an additional 999 Hz added to the requsted mode clock. This has caused a regression on RK3328 and presumably also on RK3228 because the inno-hdmi-phy clock requires an exact match of the requested rate in the pre pll config table. When an exact match is not found the parent clock rate (24MHz) is returned to the clk_round_rate() caller. This cause wrong pixel clock to be used and result in no-signal when configuring a mode on RK3328. Fix this by rounding the rate down to closest 1000 Hz in round_rate func, this allows an exact match to be found in pre pll config table. Fixes: 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-30ptp: fix the race between the release of ptp_clock and cdevVladis Dronov
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u Analyzed-by: Stephen Johnston <sjohnsto@redhat.com> Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/SVladimir Oltean
For first-generation switches (SJA1105E and SJA1105T): - TPID means C-Tag (typically 0x8100) - TPID2 means S-Tag (typically 0x88A8) While for the second generation switches (SJA1105P, SJA1105Q, SJA1105R, SJA1105S) it is the other way around: - TPID means S-Tag (typically 0x88A8) - TPID2 means C-Tag (typically 0x8100) In other words, E/T tags untagged traffic with TPID, and P/Q/R/S with TPID2. So the patch mentioned below fixed VLAN filtering for P/Q/R/S, but broke it for E/T. We strive for a common code path for all switches in the family, so just lie in the static config packing functions that TPID and TPID2 are at swapped bit offsets than they actually are, for P/Q/R/S. This will make both switches understand TPID to be ETH_P_8021Q and TPID2 to be ETH_P_8021AD. The meaning from the original E/T was chosen over P/Q/R/S because E/T is actually the one with public documentation available (UM10944.pdf). Fixes: f9a1a7646c0d ("net: dsa: sja1105: Reverse TPID and TPID2") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Remove restriction of zero base-time for taprio offloadVladimir Oltean
The check originates from the initial implementation which was not based on PTP time but on a standalone clock source. In the meantime we can now program the PTPSCHTM register at runtime with the dynamic base time (actually with a value that is 200 ns smaller, to avoid writing DELTA=0 in the Schedule Entry Points Parameters Table). And we also have logic for moving the actual base time in the future of the PHC's current time base, so the check for zero serves no purpose, since even if the user will specify zero, that's not what will end up in the static config table where the limitation is. Fixes: 86db36a347b4 ("net: dsa: sja1105: Implement state machine for TAS with PTP clock source") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Really make the PTP command read-writeVladimir Oltean
When activating tc-taprio offload on the switch ports, the TAS state machine will try to check whether it is running or not, but will find both the STARTED and STOPPED bits as false in the sja1105_tas_check_running function. So the function will return -EINVAL (an abnormal situation) and the kernel will keep printing this from the TAS FSM workqueue: [ 37.691971] sja1105 spi0.1: An operation returned -22 The reason is that the underlying function that gets called, sja1105_ptp_commit, does not actually do a SPI_READ, but a SPI_WRITE. So the command buffer remains initialized with zeroes instead of retrieving the hardware state. Fix that. Fixes: 41603d78b362 ("net: dsa: sja1105: Make the PTP command read-write") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slotVladimir Oltean
The PTP egress timestamp N must be captured from register PTPEGR_TS[n], where n = 2 * PORT + TSREG. There are 10 PTPEGR_TS registers, 2 per port. We are only using TSREG=0. As opposed to the management slots, which are 4 in number (SJA1105_NUM_PORTS, minus the CPU port). Any management frame (which includes PTP frames) can be sent to any non-CPU port through any management slot. When the CPU port is not the last port (#4), there will be a mismatch between the slot and the port number. Luckily, the only mainline occurrence with this switch (arch/arm/boot/dts/ls1021a-tsn.dts) does have the CPU port as #4, so the issue did not manifest itself thus far. Fixes: 47ed985e97f5 ("net: dsa: sja1105: Add logic for TX timestamping") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI modeVladimir Oltean
When used in Extended SPI mode on LS1021A, the DSPI controller wants to have the least significant 16-bit word written first to the TX FIFO. In fact, the LS1021A reference manual says: 33.5.2.4.2 Draining the TX FIFO When Extended SPI Mode (DSPIx_MCR[XSPI]) is enabled, if the frame size of SPI Data to be transmitted is more than 16 bits, then it causes two Data entries to be popped from TX FIFO simultaneously which are transferred to the shift register. The first of the two popped entries forms the 16 least significant bits of the SPI frame to be transmitted. So given the following TX buffer: +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+ | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 | 0x7 | 0x8 | 0x9 | 0xa | 0xb | +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+ | 32-bit word 1 | 32-bit word 2 | 32-bit word 3 | +-----------------------+-----------------------+-----------------------+ The correct way that a little-endian system should transmit it on the wire when bits_per_word is 32 is: 0x03020100 0x07060504 0x0b0a0908 But it is actually transmitted as following, as seen with a scope: 0x01000302 0x05040706 0x09080b0a It appears that this patch has been submitted at least once before: https://lkml.org/lkml/2018/9/21/286 but in that case Chuanhua Han did not manage to explain the problem clearly enough and the patch did not get merged, leaving XSPI mode broken. Fixes: 8fcd151d2619 ("spi: spi-fsl-dspi: XSPI FIFO handling (in TCFQ mode)") Cc: Esben Haabendal <eha@deif.com> Cc: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20191228135536.14284-1-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-12-30cxgb4/cxgb4vf: fix flow control display for auto negotiationRahul Lakkireddy
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: Surendra Mobiya <surendra@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30usb: chipidea: host: Disable port power only if previously enabledGuenter Roeck
On shutdown, ehci_power_off() is called unconditionally to power off each port, even if it was never called to power on the port. For chipidea, this results in a call to ehci_ci_portpower() with a request to power off ports even if the port was never powered on. This results in the following warning from the regulator code. WARNING: CPU: 0 PID: 182 at drivers/regulator/core.c:2596 _regulator_disable+0x1a8/0x210 unbalanced disables for usb_otg2_vbus Modules linked in: CPU: 0 PID: 182 Comm: init Not tainted 5.4.6 #1 Hardware name: Freescale i.MX7 Dual (Device Tree) [<c0313658>] (unwind_backtrace) from [<c030d698>] (show_stack+0x10/0x14) [<c030d698>] (show_stack) from [<c1133afc>] (dump_stack+0xe0/0x10c) [<c1133afc>] (dump_stack) from [<c0349098>] (__warn+0xf4/0x10c) [<c0349098>] (__warn) from [<c0349128>] (warn_slowpath_fmt+0x78/0xbc) [<c0349128>] (warn_slowpath_fmt) from [<c09f36ac>] (_regulator_disable+0x1a8/0x210) [<c09f36ac>] (_regulator_disable) from [<c09f374c>] (regulator_disable+0x38/0xe8) [<c09f374c>] (regulator_disable) from [<c0df7bac>] (ehci_ci_portpower+0x38/0xdc) [<c0df7bac>] (ehci_ci_portpower) from [<c0db4fa4>] (ehci_port_power+0x50/0xa4) [<c0db4fa4>] (ehci_port_power) from [<c0db5420>] (ehci_silence_controller+0x5c/0xc4) [<c0db5420>] (ehci_silence_controller) from [<c0db7644>] (ehci_stop+0x3c/0xcc) [<c0db7644>] (ehci_stop) from [<c0d5bdc4>] (usb_remove_hcd+0xe0/0x19c) [<c0d5bdc4>] (usb_remove_hcd) from [<c0df7638>] (host_stop+0x38/0xa8) [<c0df7638>] (host_stop) from [<c0df2f34>] (ci_hdrc_remove+0x44/0xe4) ... Keeping track of the power enable state avoids the warning and traceback. Fixes: c8679a2fb8dec ("usb: chipidea: host: add portpower override") Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Peter Chen <peter.chen@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191226155754.25451-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: cdns3: should not use the same dev_id for shared interrupt handlerPeter Chen
Both drd and gadget interrupt handler use the struct cdns3 pointer as dev_id, it causes devm_free_irq at cdns3_gadget_exit doesn't free gadget's interrupt handler, it freed drd's handler. So, when the host interrupt occurs, the gadget's interrupt hanlder is still called, and causes below oops. To fix it, we use gadget's private data priv_dev as interrupt dev_id for gadget. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000380 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000971d79000 [0000000000000380] pgd=0000000971d6f003, pud=0000000971d6e003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: mxc_jpeg_encdec crct10dif_ce fsl_imx8_ddr_perf CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-03486-g69f4e7d9c54a-dirty #254 Hardware name: Freescale i.MX8QM MEK (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : cdns3_device_irq_handler+0x1c/0xb8 lr : __handle_irq_event_percpu+0x78/0x2c0 sp : ffff800010003e30 x29: ffff800010003e30 x28: ffff8000129bb000 x27: ffff8000126e9000 x26: ffff0008f61b5600 x25: ffff800011fe1018 x24: ffff8000126ea120 x23: ffff800010003f04 x22: 0000000000000000 x21: 0000000000000093 x20: ffff0008f61b5600 x19: ffff0008f5061a80 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 003d090000000000 x13: 00003d0900000000 x12: 0000000000000000 x11: 00003d0900000000 x10: 0000000000000040 x9 : ffff800012708cb8 x8 : ffff800012708cb0 x7 : ffff0008f7c7a9d0 x6 : 0000000000000000 x5 : ffff0008f7c7a910 x4 : ffff8008ed359000 x3 : ffff800010003f40 x2 : 0000000000000000 x1 : ffff0008f5061a80 x0 : ffff800010161a60 Call trace: cdns3_device_irq_handler+0x1c/0xb8 __handle_irq_event_percpu+0x78/0x2c0 handle_irq_event_percpu+0x40/0x98 handle_irq_event+0x4c/0xd0 handle_fasteoi_irq+0xbc/0x168 generic_handle_irq+0x34/0x50 __handle_domain_irq+0x6c/0xc0 gic_handle_irq+0xd4/0x174 el1_irq+0xb8/0x180 arch_cpu_idle+0x3c/0x230 default_idle_call+0x38/0x40 do_idle+0x20c/0x298 cpu_startup_entry+0x28/0x48 rest_init+0xdc/0xe8 arch_call_rest_init+0x14/0x1c start_kernel+0x48c/0x4b8 Code: aa0103f3 aa1e03e0 d503201f f9409662 (f941c040) ---[ end trace 091dcf4dee011b0e ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0002,2100600c Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> #v5.4 Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1577437804-18146-1-git-send-email-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: dwc3: gadget: Fix request complete checkThinh Nguyen
We can only check for IN direction if the request had completed. For OUT direction, it's perfectly fine that the host can send less than the setup length. Let's return true fall all cases of OUT direction. Fixes: e0c42ce590fe ("usb: dwc3: gadget: simplify IOC handling") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Link: https://lore.kernel.org/r/ac5a3593a94fdaa3d92e6352356b5f7a01ccdc7c.1576291140.git.thinhn@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: musb: dma: Correct parameter passed to IRQ handlerPaul Cercueil
The IRQ handler was passed a pointer to a struct dma_controller, but the argument was then casted to a pointer to a struct musb_dma_controller. Fixes: 427c4f333474 ("usb: struct device - replace bus_id with dev_name(), dev_set_name()") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20191216161844.772-2-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: musb: jz4740: Silence error if code is -EPROBE_DEFERPaul Cercueil
Avoid printing any error message if the error code is -EPROBE_DEFER. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20191216162432.1256-1-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: udc: tegra: select USB_ROLE_SWITCHArnd Bergmann
Without this, this new driver fails to link: drivers/usb/gadget/udc/tegra-xudc.o: In function `tegra_xudc_remove': tegra-xudc.c:(.text+0x19d4): undefined reference to `usb_role_switch_unregister' drivers/usb/gadget/udc/tegra-xudc.o: In function `tegra_xudc_probe': tegra-xudc.c:(.text+0x2a34): undefined reference to `usb_role_switch_register' drivers/usb/gadget/udc/tegra-xudc.o: In function `tegra_xudc_usb_role_sw_work': tegra-xudc.c:(.text+0x4b64): undefined reference to `usb_role_switch_get_role' Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191216131831.3228566-1-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30USB: core: fix check for duplicate endpointsJohan Hovold
Amend the endpoint-descriptor sanity checks to detect all duplicate endpoint addresses in a configuration. Commit 0a8fd1346254 ("USB: fix problems with duplicate endpoint addresses") added a check for duplicate endpoint addresses within a single alternate setting, but did not look for duplicate addresses in other interfaces. The current check would also not detect all duplicate addresses when one endpoint is as a (bi-directional) control endpoint. This specifically avoids overwriting the endpoint entries in struct usb_device when enabling a duplicate endpoint, something which could potentially lead to crashes or leaks, for example, when endpoints are later disabled. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20191219161016.6695-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30tty: always relink the portSudip Mukherjee
If the serial device is disconnected and reconnected, it re-enumerates properly but does not link it. fwiw, linking means just saving the port index, so allow it always as there is no harm in saving the same value again even if it tries to relink with the same port. Fixes: fb2b90014d78 ("tty: link tty and port before configuring it as console") Reported-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191227174434.12057-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30null_blk: Fix REQ_OP_ZONE_CLOSE handlingDamien Le Moal
In order to match ZBC defined behavior, closing an empty zone must result in the "empty" zone condition instead of the "closed" condition. Fixes: da644b2cc1a4 ("null_blk: add zone open, close, and finish support") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-30watchdog: orion: fix platform_get_irq() complaintsRussell King
Fix: orion_wdt f1020300.watchdog: IRQ index 1 not found which is caused by platform_get_irq() now complaining when optional IRQs are not found. Neither interrupt for orion is required, so make them both optional. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: rn5t618_wdt: fix module aliasesAndreas Kemnade
Platform device aliases were missing so module autoloading did not work. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit (git 2.34.1) at 2025-07-18 15:17:55 +0000