summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-12-30watchdog: tqmx86_wdt: Fix build errorYueHaibing
If TQMX86_WDT is y and WATCHDOG_CORE is m, building fails: drivers/watchdog/tqmx86_wdt.o: In function `tqmx86_wdt_probe': tqmx86_wdt.c:(.text+0x46e): undefined reference to `watchdog_init_timeout' tqmx86_wdt.c:(.text+0x4e0): undefined reference to `devm_watchdog_register_device' Select WATCHDOG_CORE to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e3c21e088f89 ("watchdog: tqmx86: Add watchdog driver for the IO controller") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191206124259.25880-1-yuehaibing@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: max77620_wdt: fix potential build errorsDavid Engraf
max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE to fix potential build errors. Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191127084617.16937-1-david.engraf@sysgo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: imx7ulp: Fix missing conversion of imx7ulp_wdt_enable()Fabio Estevam
Since commit 747d88a1a88c1b ("watchdog: imx7ulp: Pass the wdog instance in imx7ulp_wdt_enable()") imx7ulp_wdt_enable() accepts a watchdog_device structure, so fix one instance that missed such conversion. This also fixes the following sparse warning: drivers/watchdog/imx7ulp_wdt.c:115:31: warning: incorrect type in argument 1 (different address spaces) drivers/watchdog/imx7ulp_wdt.c:115:31: expected struct watchdog_device *wdog drivers/watchdog/imx7ulp_wdt.c:115:31: got void [noderef] <asn:2>*base Fixes: 747d88a1a88c1 ("watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191120140916.25001-1-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: w83627hf_wdt: Fix support NCT6116DSrikanth Krishnakar
We should select nct6116 for the new chip, not nct6102. Signed-off-by: Srikanth Krishnakar <skrishnakar@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30Revert "iwlwifi: mvm: fix scan config command size"Mehmet Akif Tasova
Since v5.4-rc1 was released, iwlwifi started throwing errors when scan commands were sent to the firmware with certain devices (depending on the OTP burned in the device, which contains the list of available channels). For instance: iwlwifi 0000:00:14.3: FW error in SYNC CMD SCAN_CFG_CMD This bug was reported in the ArchLinux bug tracker: https://bugs.archlinux.org/task/64703 And also in a specific case in bugzilla, when the lar_disabled option was set: https://bugzilla.kernel.org/show_bug.cgi?id=205193 Revert the commit that introduced this error, by using the number of channels from the OTP instead of the number of channels that is specified in the FW TLV that tells us how many channels it supports. This reverts commit 06eb547c4ae4382e70d556ba213d13c95ca1801b. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Mehmet Akif Tasova <makiftasova@gmail.com> [ Luca: reworded the commit message a bit. ] Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-12-29HID: intel-ish-hid: ipc: Add Tiger Lake PCI device IDSrinivas Pandruvada
Added Tiger Lake PCI device ID to the supported device list. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-29mlxsw: spectrum: Use dedicated policer for VRRP packetsIdo Schimmel
Currently, VRRP packets and packets that hit exceptions during routing (e.g., MTU error) are policed using the same policer towards the CPU. This means, for example, that misconfiguration of the MTU on a routed interface can prevent VRRP packets from reaching the CPU, which in turn can cause the VRRP daemon to assume it is the Master router. Fix this by using a dedicated policer for VRRP packets. Fixes: 11566d34f895 ("mlxsw: spectrum: Add VRRP traps") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-29mlxsw: spectrum_router: Skip loopback RIFs during MAC validationAmit Cohen
When a router interface (RIF) is created the MAC address of the backing netdev is verified to have the same MSBs as existing RIFs. This is required in order to avoid changing existing RIF MAC addresses that all share the same MSBs. Loopback RIFs are special in this regard as they do not have a MAC address, given they are only used to loop packets from the overlay to the underlay. Without this change, an error is returned when trying to create a RIF after the creation of a GRE tunnel that is represented by a loopback RIF. 'rif->dev->dev_addr' points to the GRE device's local IP, which does not share the same MSBs as physical interfaces. Adding an IP address to any physical interface results in: Error: mlxsw_spectrum: All router interface MAC addresses must have the same prefix. Fix this by skipping loopback RIFs during MAC validation. Fixes: 74bc99397438 ("mlxsw: spectrum_router: Veto unsupported RIF MAC addresses") Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-29drm/amdgpu: enable gfxoff for raven1 refreshchangzhu
When smu version is larger than 0x41e2b, it will load raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads raven_kicker_rlc.bin. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-29drm/amdgpu/smu: add metrics table lock for vega20 (v2)Alex Deucher
To protect access to the metrics table. v2: unlock on error Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-29drm/amdgpu/smu: add metrics table lock for navi (v2)Alex Deucher
To protect access to the metrics table. v2: unlock on error Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-29drm/amdgpu/smu: add metrics table lock for arcturus (v2)Alex Deucher
To protect access to the metrics table. v2: unlock on error Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-29drm/amdgpu/smu: add metrics table lockAlex Deucher
This table is used for lots of things, add it's own lock. Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-29Revert "drm/amdgpu: simplify ATPX detection"Alex Deucher
This reverts commit f5fda6d89afe6e9cedaa1c3303903c905262f6e8. You can't use BASE_CLASS in pci_get_class. Bug: https://gitlab.freedesktop.org/drm/amd/issues/995 Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes and one spelling update, all in drivers: two in lpfc and the rest in mp3sas, cxgbi and target" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target/iblock: Fix protection error with blocks greater than 512B scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy() scsi: lpfc: fix spelling mistakes of asynchronous scsi: lpfc: fix build failure with DEBUGFS disabled scsi: mpt3sas: Fix double free in attach error handling
2019-12-27net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCsMartin Blumenstingl
GXBB and newer SoCs use the fixed FCLK_DIV2 (1GHz) clock as input for the m250_sel clock. Meson8b and Meson8m2 use MPLL2 instead, whose rate can be adjusted at runtime. So far we have been running MPLL2 with ~250MHz (and the internal m250_div with value 1), which worked enough that we could transfer data with an TX delay of 4ns. Unfortunately there is high packet loss with an RGMII PHY when transferring data (receiving data works fine though). Odroid-C1's u-boot is running with a TX delay of only 2ns as well as the internal m250_div set to 2 - no lost (TX) packets can be observed with that setting in u-boot. Manual testing has shown that the TX packet loss goes away when using the following settings in Linux (the vendor kernel uses the same settings): - MPLL2 clock set to ~500MHz - m250_div set to 2 - TX delay set to 2ns on the MAC side Update the m250_div divider settings to only accept dividers greater or equal 2 to fix the TX delay generated by the MAC. iperf3 results before the change: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 182 MBytes 153 Mbits/sec 514 sender [ 5] 0.00-10.00 sec 182 MBytes 152 Mbits/sec receiver iperf3 results after the change (including an updated TX delay of 2ns): [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-10.00 sec 927 MBytes 778 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 927 MBytes 777 Mbits/sec receiver Fixes: 4f6a71b84e1afd ("net: stmmac: dwmac-meson8b: fix internal RGMII clock configuration") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27spi: Don't look at TX buffer for PTP system timestampingVladimir Oltean
The API for PTP system timestamping (associating a SPI transaction with the system time at which it was transferred) is flawed: it assumes that the xfer->tx_buf pointer will always be present. This is, of course, not always the case. So introduce a "progress" variable that denotes how many word have been transferred. Fix the Freescale DSPI driver, the only user of the API so far, in the same patch. Fixes: b42faeee718c ("spi: Add a PTP system timestamp to the transfer structure") Fixes: d6b71dfaeeba ("spi: spi-fsl-dspi: Implement the PTP system timestamping for TCFQ mode") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20191227012417.1057-1-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-27Merge tag 'drm-fixes-2019-12-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Post-xmas food coma recovery fixes. Only three fixes for i915 since I expect most people are holidaying. i915: - power management rc6 fix - framebuffer tracking fix - display power management ratelimit fix" * tag 'drm-fixes-2019-12-28' of git://anongit.freedesktop.org/drm/drm: drm/i915: Hold reference to intel_frontbuffer as we track activity drm/i915/gt: Ratelimit display power w/a drm/i915/pmu: Ensure monotonic rc6
2019-12-27Merge tag 'pm-5.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Fix compile test of the Tegra devfreq driver (Arnd Bergmann) and remove redundant Kconfig dependencies from multiple devfreq drivers (Leonard Crestez)" * tag 'pm-5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / devfreq: tegra: Add COMMON_CLK dependency PM / devfreq: Drop explicit selection of PM_OPP
2019-12-27Merge tag 'libata-5.5-20191226' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata fixes from Jens Axboe: "Two things in here: - First half of a series that fixes ahci_brcm, also marked for stable. The other part of the series is going into 5.6 (Florian) - sata_nv regression fix that is also marked for stable (Sascha)" * tag 'libata-5.5-20191226' of git://git.kernel.dk/linux-block: ata: ahci_brcm: Add missing clock management during recovery ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE ata: ahci_brcm: Fix AHCI resources management ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys() libata: Fix retrieving of active qcs
2019-12-27Merge tag 'block-5.5-20191226' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Only thing here are the changes from Arnd from last week, which now have the appropriate header include to ensure they actually compile if COMPAT is enabled" * tag 'block-5.5-20191226' of git://git.kernel.dk/linux-block: compat_ioctl: block: handle Persistent Reservations compat_ioctl: block: handle add zone open, close and finish ioctl compat_ioctl: block: handle BLKGETZONESZ/BLKGETNRZONES compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE pktcdvd: fix regression on 64-bit architectures
2019-12-27Merge tag 'gpio-v5.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "A set of fixes for the v5.5 series: - Fix the build for the Xtensa driver. - Make sure to set up the parent device for mpc8xxx. - Clarify the look-up error message. - Fix the usage of the line direction in the mockup device. - Fix a type warning on the Aspeed driver. - Remove the pointless __exit annotation on the xgs-iproc which is causing a compilation problem. - Fix up emultation of open drain outputs .get_direction() - Fix the IRQ callbacks on the PCA953xx to use bitops and work properly. - Fix the Kconfig on the Tegra driver" * tag 'gpio-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra186: Allow building on Tegra194-only configurations gpio: pca953x: Switch to bitops in IRQ callbacks gpiolib: fix up emulated open drain outputs MAINTAINERS: Append missed file to the database gpio: xgs-iproc: remove __exit annotation for iproc_gpio_remove gpio: aspeed: avoid return type warning gpio: mockup: Fix usage of new GPIO_LINE_DIRECTION gpio: Fix error message on out-of-range GPIO in lookup table gpio: mpc8xxx: Add platform device to gpiochip->parent gpio: xtensa: fix driver build
2019-12-27ioat: ioat_alloc_ring() failure handling.Alexander.Barabash@dell.com
If dma_alloc_coherent() returns NULL in ioat_alloc_ring(), ring allocation must not proceed. Until now, if the first call to dma_alloc_coherent() in ioat_alloc_ring() returned NULL, the processing could proceed, failing with NULL-pointer dereferencing further down the line. Signed-off-by: Alexander Barabash <alexander.barabash@dell.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/75e9c0e84c3345d693c606c64f8b9ab5@x13pwhopdag1307.AMER.DELL.COM Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26bnx2x: Fix accounting of vlan resources among the PFsManish Chopra
While testing max vlan configuration on the PF, firmware gets assert as driver was configuring number of vlans more than what is supported per port/engine, it was figured out that there is an implicit vlan (hidden default vlan consuming hardware cam entry resource) which is configured default for all the clients (PF/VFs) on client_init ramrod by the adapter implicitly, so when allocating resources among the PFs this implicit vlan should be considered or total vlan entries should be reduced by one to accommodate that default/implicit vlan entry. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26bnx2x: Use appropriate define for vlan creditManish Chopra
Although it has same value as MAX_MAC_CREDIT_E2, use MAX_VLAN_CREDIT_E2 appropriately. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26net: phy: aquantia: add suspend / resume ops for AQR105Madalin Bucur
The suspend/resume code for AQR107 works on AQR105 too. This patch fixes issues with the partner not seeing the link down when the interface using AQR105 is brought down. Fixes: bee8259dd31f ("net: phy: add driver for aquantia phy") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26dpaa_eth: fix DMA mapping leakMadalin Bucur
On the error path some fragments remain DMA mapped. Adding a fix that unmaps all the fragments. Rework cleanup path to be simpler. Fixes: 8151ee88bad5 ("dpaa_eth: use page backed rx buffers") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26clk: Don't try to enable critical clocks if prepare failedGuenter Roeck
The following traceback is seen if a critical clock fails to prepare. bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL ------------[ cut here ]------------ Enabling unprepared plld_per WARNING: CPU: 1 PID: 1 at drivers/clk/clk.c:1014 clk_core_enable+0xcc/0x2c0 ... Call trace: clk_core_enable+0xcc/0x2c0 __clk_register+0x5c4/0x788 devm_clk_hw_register+0x4c/0xb0 bcm2835_register_pll_divider+0xc0/0x150 bcm2835_clk_probe+0x134/0x1e8 platform_drv_probe+0x50/0xa0 really_probe+0xd4/0x308 driver_probe_device+0x54/0xe8 device_driver_attach+0x6c/0x78 __driver_attach+0x54/0xd8 ... Check return values from clk_core_prepare() and clk_core_enable() and bail out if any of those functions returns an error. Cc: Jerome Brunet <jbrunet@baylibre.com> Fixes: 99652a469df1 ("clk: migrate the count of orphaned clocks at init") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20191225163429.29694-1-linux@roeck-us.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-26net/mlxfw: Fix out-of-memory error in mfa2 flash burningVladyslav Tarasiuk
The burning process requires to perform internal allocations of large chunks of memory. This memory doesn't need to be contiguous and can be safely allocated by vzalloc() instead of kzalloc(). This patch changes such allocation to avoid possible out-of-memory failure. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26phy: cpcap-usb: Drop extra write to usb2 registerTony Lindgren
We are currently writing the same register twice. Let's enable the USB PHY only at the end of the function. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Improve host vs docked mode detectionTony Lindgren
When docked to a Motorola lapdock or media dock, we're in USB A-host mode with VBUS provided by the dock. When in regular USB A-host mode, we're providing the VBUS. And in regular USB A-host mode we must also keep kicking the VBUS to keep it active. Let's wait a bit before configuring the USB PHY to allow some time between the ID and VBUS changes. And let's add vbus_provider flag so we can detect docked mode and regularo USB A-host mode better. With better USB A-host mode detection, we can now also just kick the VBUS to keep it enabled and leave out the unnecessary line muxing. We only need to set and clear vbus_provider in the delayed work so no locking is needed for it currently. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Prevent USB line glitches from waking up modemTony Lindgren
The micro-USB connector on Motorola Mapphone devices can be muxed between the SoC and the mdm6600 modem. But even when used for the SoC, configuring the PHY with ID pin grounded will wake up the modem from idle state. Looks like the issue is probably caused by line glitches. We can prevent the glitches by using a previously unknown mode of the GPIO mux to prevent the USB lines from being connected to the moden while configuring the USB PHY, and enable the USB lines after configuring the PHY. Note that this only prevents waking up mdm6600 as regular USB A-host mode, and does not help when connected to a lapdock. The lapdock specific issue still needs to be debugged separately. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: mapphone-mdm6600: Fix uninitialized status value regressionTony Lindgren
Only the used bits get cleared with bitmap_zero() when we call gpiod_get_array_value_cansleep(). We must mask only the bits we're using for ddata->status as the other bits in the bitmap may not be initialized. And let's also drop useless debug code accidentally left over while at it. Fixes: b9762bebc633 ("gpiolib: Pass bitmaps, not integer arrays, to get/set array") Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Fix flakey host idling and enumerating of devicesTony Lindgren
We must let the USB host idle things properly before we switch to debug UART mode. Otherwise the USB host may never idle after disconnecting devices, and that causes the next enumeration to be flakey. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-25ata: ahci_brcm: Add missing clock management during recoveryFlorian Fainelli
The downstream implementation of ahci_brcm.c did contain clock management recovery, but until recently, did that outside of the libahci_platform helpers and this was unintentionally stripped out while forward porting the patch upstream. Add the missing clock management during recovery and sleep for 10 milliseconds per the design team recommendations to ensure the SATA PHY controller and AFE have been fully quiesced. Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINEFlorian Fainelli
Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making it conforming to the 'strict' AHCI implementation which this controller is based on. This solves long link establishment with specific hard drives (e.g.: Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the error recovery handling before finally establishing a succesful SATA link at the desired speed. We re-order the hpriv->flags assignment to also remove the NONCQ quirk since we can set the flag directly. Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms") Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: Fix AHCI resources managementFlorian Fainelli
The AHCI resources management within ahci_brcm.c is a little convoluted, largely because it historically had a dedicated clock that was managed within this file in the downstream tree. Once brough upstream though, the clock was left to be managed by libahci_platform.c which is entirely appropriate. This patch series ensures that the AHCI resources are fetched and enabled before any register access is done, thus avoiding bus errors on platforms which clock gate the controller by default. As a result we need to re-arrange the suspend() and resume() functions in order to avoid accessing registers after the clocks have been turned off respectively before the clocks have been turned on. Finally, we can refactor brcm_ahci_get_portmask() in order to fetch the number of ports from hpriv->mmio which is now accessible without jumping through hoops like we used to do. The commit pointed in the Fixes tag is both old and new enough not to require major headaches for backporting of this patch. Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()Florian Fainelli
This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5 ("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25libata: Fix retrieving of active qcsSascha Hauer
ata_qc_complete_multiple() is called with a mask of the still active tags. mv_sata doesn't have this information directly and instead calculates the still active tags from the started tags (ap->qc_active) and the finished tags as (ap->qc_active ^ done_mask) Since 28361c40368 the hw_tag and tag are no longer the same and the equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is started and this will be in done_mask on completion. ap->qc_active ^ done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as the internal tag will never be reported as completed. This is fixed by introducing ata_qc_get_active() which returns the active hardware tags and calling it where appropriate. This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same problem. There is another case in sata_nv that most likely needs fixing as well, but this looks a little different, so I wasn't confident enough to change that. Fixes: 28361c403683 ("libata: add extra internal command") Cc: stable@vger.kernel.org Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Add missing export of ata_qc_get_active(), as per Pali. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25regulator: axp20x: Fix axp20x_set_ramp_delayAxel Lin
Current code set incorrect bits when set ramp_delay for AXP20X_DCDC2, fix it. Fixes: d29f54df8b16 ("regulator: axp20x: add support for set_ramp_delay for AXP209") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20191221081049.32490-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-25efi/libstub/random: Initialize pointer variables to zero for mixed modeHans de Goede
Commit: 0d95981438c3 ("x86: efi/random: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table") causes the drivers/efi/libstub/random.c code to get used on x86 for the first time. But this code was not written with EFI mixed mode in mind (running a 64 bit kernel on 32 bit EFI firmware), this causes the kernel to crash during early boot when running in mixed mode. The problem is that in mixed mode pointers are 64 bit, but when running on a 32 bit firmware, EFI calls which return a pointer value by reference only fill the lower 32 bits of the passed pointer, leaving the upper 32 bits uninitialized which leads to crashes. This commit fixes this by initializing pointers which are passed by reference to EFI calls to NULL before passing them, so that the upper 32 bits are initialized to 0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 0d95981438c3 ("x86: efi/random: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table") Link: https://lkml.kernel.org/r/20191224132909.102540-3-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-25efi/earlycon: Fix write-combine mapping on x86Arvind Sankar
On x86, until PAT is initialized, WC translates into UC-. Since we calculate and store pgprot_writecombine(PAGE_KERNEL) when earlycon is initialized, this means we actually use UC- mappings instead of WC mappings, which makes scrolling very slow. Instead store a boolean flag to indicate whether we want to use writeback or write-combine mappings, and recalculate the actual pgprot_t we need on every mapping. Once PAT is initialized, we will start using write-combine mappings, which speeds up the scrolling considerably. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 69c1f396f25b ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation") Link: https://lkml.kernel.org/r/20191224132909.102540-2-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-24s390/qeth: fix initialization on old HWJulian Wiedmann
I stumbled over an old OSA model that claims to support DIAG_ASSIST, but then rejects the cmd to query its DIAG capabilities. In the old code this was ok, as the returned raw error code was > 0. Now that we translate the raw codes to errnos, the "rc < 0" causes us to fail the initialization of the device. The fix is trivial: don't bail out when the DIAG query fails. Such an error is not critical, we can still use the device (with a slightly reduced set of features). Fixes: 742d4d40831d ("s390/qeth: convert remaining legacy cmd callbacks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24s390/qeth: vnicc Fix init to defaultAlexandra Winter
During vnicc_init wanted_char should be compared to cur_char and not to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce the default values as desired values. Note, that it is expected, that a card comes online with default values. This patch was tested with private card firmware. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24s390/qeth: Fix vnicc_is_in_use if rx_bcast not setAlexandra Winter
Symptom: After vnicc/rx_bcast has been manually set to 0, bridge_* sysfs parameters can still be set or written. Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast. Vnic characteristics and bridgeport settings are mutually exclusive. rx_bcast defaults to 1, so manually setting it to 0 should disable bridge_* parameters. Instead it makes sense here to check the supported mask. If the card does not support vnicc at all, bridge commands are always allowed. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24s390/qeth: fix false reporting of VNIC CHAR config failureAlexandra Winter
Symptom: Error message "Configuring the VNIC characteristics failed" in dmesg whenever an OSA interface on z15 is set online. The VNIC characteristics get re-programmed when setting a L2 device online. This follows the selected 'wanted' characteristics - with the exception that the INVISIBLE characteristic unconditionally gets switched off. For devices that don't support INVISIBLE (ie. OSA), the resulting IO failure raises a noisy error message ("Configuring the VNIC characteristics failed"). For IQD, INVISIBLE is off by default anyways. So don't unnecessarily special-case the INVISIBLE characteristic, and thereby suppress the misleading error message on OSA devices. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24s390/qeth: lock the card while changing its hsuidJulian Wiedmann
qeth_l3_dev_hsuid_store() initially checks the card state, but doesn't take the conf_mutex to ensure that the card stays in this state while being reconfigured. Rework the code to take this lock, and drop a redundant state check in a helper function. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24s390/qeth: fix qdio teardown after early init errorJulian Wiedmann
qeth_l?_set_online() goes through a number of initialization steps, and on any error uses qeth_l?_stop_card() to tear down the residual state. The first initialization step is qeth_core_hardsetup_card(). When this fails after having established a QDIO context on the device (ie. somewhere after qeth_mpc_initialize()), qeth_l?_stop_card() doesn't shut down this QDIO context again (since the card state hasn't progressed from DOWN at this stage). Even worse, we then call qdio_free() as final teardown step to free the QDIO data structures - while some of them are still hooked into wider QDIO infrastructure such as the IRQ list. This is inevitably followed by use-after-frees and other nastyness. Fix this by unconditionally calling qeth_qdio_clear_card() to shut down the QDIO context, and also to halt/clear any pending activity on the various IO channels. Remove the naive attempt at handling the teardown in qeth_mpc_initialize(), it clearly doesn't suffice and we're handling it properly now in the wider teardown code. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24gtp: do not confirm neighbor when do pmtu updateHangbin Liu
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. Although GTP only support ipv4 right now, and __ip_rt_update_pmtu() does not call dst_confirm_neigh(), we still set it to false to keep consistency with IPv6 code. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24net: add bool confirm_neigh parameter for dst_ops.update_pmtuHangbin Liu
The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-18 18:05:55 +0000