summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-12-13Merge tag 'ffa-fix-6.13' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FF-A fix for v6.13 A single fix to address a possible race around setting ffa_dev->properties in ffa_device_register() by updating ffa_device_register() to take all the partition information received from the firmware and updating the struct ffa_device accordingly before registering the device to the bus/driver model in the kernel. * tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Fix the race around setting ffa_dev->properties Link: https://lore.kernel.org/r/20241210101113.3232602-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-12-13drm/panel: synaptics-r63353: Fix regulator unbalanceMichael Trimarchi
The shutdown function can be called when the display is already unprepared. For example during reboot this trigger a kernel backlog. Calling the drm_panel_unprepare, allow us to avoid to trigger the kernel warning. Fixes: 2e87bad7cd33 ("drm/panel: Add Synaptics R63353 panel driver") Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com
2024-12-13drm/panel: st7701: Add prepare_prev_first flag to drm_panelMarek Vasut
The DSI host must be enabled for the panel to be initialized in prepare(). Set the prepare_prev_first flag to guarantee this. This fixes the panel operation on NXP i.MX8MP SoC / Samsung DSIM DSI host. Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20241124224812.150263-1-marex@denx.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241124224812.150263-1-marex@denx.de
2024-12-13drm/panel: novatek-nt35950: fix return value check in nt35950_probe()Yang Yingliang
mipi_dsi_device_register_full() never returns NULL pointer, it will return ERR_PTR() when it fails, so replace the check with IS_ERR(). Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241029123957.1588-1-yangyingliang@huaweicloud.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241029123957.1588-1-yangyingliang@huaweicloud.com
2024-12-13drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereferenceZhang Zekun
drm_mode_duplicate() could return NULL due to lack of memory, which will then call NULL pointer dereference. Add a check to prevent it. Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver") Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241025073408.27481-3-zhangzekun11@huawei.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241025073408.27481-3-zhangzekun11@huawei.com
2024-12-13xen/netfront: fix crash when removing deviceJuergen Gross
When removing a netfront device directly after a suspend/resume cycle it might happen that the queues have not been setup again, causing a crash during the attempt to stop the queues another time. Fix that by checking the queues are existing before trying to stop them. This is XSA-465 / CVE-2024-53240. Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: d50b7914fae0 ("xen-netfront: Fix NULL sring after live migration") Signed-off-by: Juergen Gross <jgross@suse.com>
2024-12-13efi/esrt: remove esre_attribute::store()Jiri Slaby (SUSE)
esre_attribute::store() is not needed since commit af97a77bc01c (efi: Move some sysfs files to be read-only by root). Drop it. Found by https://github.com/jirislaby/clang-struct. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: linux-efi@vger.kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-12-13Merge tag 'amd-drm-fixes-6.13-2024-12-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.13-2024-12-11: amdgpu: - ISP hw init fix - SR-IOV fixes - Fix contiguous VRAM mapping for UVD on older GPUs - Fix some regressions due to drm scheduler changes - Workload profile fixes - Cleaner shader fix amdkfd: - Fix DMA map direction for migration - Fix a potential null pointer dereference - Cacheline size fixes - Runtime PM fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211215449.741848-1-alexander.deucher@amd.com
2024-12-13Merge tag 'drm-xe-fixes-2024-12-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - Fix a KUNIT test error message (Mirsad Todorovac) - Fix an invalidation fence PM ref leak (Daniele) - Fix a register pool UAF (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z1s5elHXOyeIHnE0@fedora
2024-12-12Merge tag 'net-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, netfilter and wireless. Current release - fix to a fix: - rtnetlink: fix error code in rtnl_newlink() - tipc: fix NULL deref in cleanup_bearer() Current release - regressions: - ip: fix warning about invalid return from in ip_route_input_rcu() Current release - new code bugs: - udp: fix L4 hash after reconnect - eth: lan969x: fix cyclic dependency between modules - eth: bnxt_en: fix potential crash when dumping FW log coredump Previous releases - regressions: - wifi: mac80211: - fix a queue stall in certain cases of channel switch - wake the queues in case of failure in resume - splice: do not checksum AF_UNIX sockets - virtio_net: fix BUG()s in BQL support due to incorrect accounting of purged packets during interface stop - eth: - stmmac: fix TSO DMA API mis-usage causing oops - bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops due to incorrect aggregation ID mask on 5760X chips Previous releases - always broken: - Bluetooth: improve setsockopt() handling of malformed user input - eth: ocelot: fix PTP timestamping in presence of packet loss - ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not supported" * tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits) net: dsa: tag_ocelot_8021q: fix broken reception net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries net: renesas: rswitch: fix initial MPIC register setting Bluetooth: btmtk: avoid UAF in btmtk_process_coredump Bluetooth: iso: Fix circular lock in iso_conn_big_sync Bluetooth: iso: Fix circular lock in iso_listen_bis Bluetooth: SCO: Add support for 16 bits transparent voice setting Bluetooth: iso: Fix recursive locking warning Bluetooth: iso: Always release hdev at the end of iso_listen_bis Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating Bluetooth: hci_core: Fix sleeping function called from invalid context team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL team: Fix initial vlan_feature set in __team_compute_features bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features net, team, bonding: Add netdev_base_features helper net/sched: netem: account for backlog updates from child qdisc net: dsa: felix: fix stuck CPU-injected packets with short taprio windows splice: do not checksum AF_UNIX sockets net: usb: qmi_wwan: add Telit FE910C04 compositions ...
2024-12-12Merge tag 'arm-smmu-fixes' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes Arm SMMU fixes for 6.13-rc - Use raw_smp_processor_id() when balancing traffic for NVIDIA's custom command queue implementation.
2024-12-12drm/xe/reg_sr: Remove register poolLucas De Marchi
That pool implementation doesn't really work: if the krealloc happens to move the memory and return another address, the entries in the xarray become invalid, leading to use-after-free later: BUG: KASAN: slab-use-after-free in xe_reg_sr_apply_mmio+0x570/0x760 [xe] Read of size 4 at addr ffff8881244b2590 by task modprobe/2753 Allocated by task 2753: kasan_save_stack+0x39/0x70 kasan_save_track+0x14/0x40 kasan_save_alloc_info+0x37/0x60 __kasan_kmalloc+0xc3/0xd0 __kmalloc_node_track_caller_noprof+0x200/0x6d0 krealloc_noprof+0x229/0x380 Simplify the code to fix the bug. A better pooling strategy may be added back later if needed. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241209232739.147417-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit e5283bd4dfecbd3335f43b62a68e24dae23f59e4) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-12-12drm/xe: Call invalidation_fence_fini for PT inval fences in error stateDaniele Ceraolo Spurio
Invalidation_fence_init takes a PM reference, which is released in its _fini counterpart, so we need to make sure that the latter is called, even if the fence is in an error state. Since we already have a function that calls _fini() and signals the fence in the tlb inval code, we can expose that and call it from the PT code. Fixes: f002702290fc ("drm/xe: Hold a PM ref when GT TLB invalidations are inflight") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: <stable@vger.kernel.org> # v6.11+ Cc: Matthew Brost <matthew.brost@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241206015022.1567113-1-daniele.ceraolospurio@intel.com (cherry picked from commit 65338639b79ce88aef5263cd518cde570a3c7c8e) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-12-12drm/xe: fix the ERR_PTR() returned on failure to allocate tiny ptMirsad Todorovac
Running coccinelle spatch gave the following warning: ./drivers/gpu/drm/xe/tests/xe_migrate.c:226:5-11: inconsistent IS_ERR and PTR_ERR on line 228. The code reports PTR_ERR(pt) when IS_ERR(tiny) is checked: → 211 pt = xe_bo_create_pin_map(xe, tile, m->q->vm, XE_PAGE_SIZE, 212 ttm_bo_type_kernel, 213 XE_BO_FLAG_VRAM_IF_DGFX(tile) | 214 XE_BO_FLAG_PINNED); 215 if (IS_ERR(pt)) { 216 KUNIT_FAIL(test, "Failed to allocate fake pt: %li\n", 217 PTR_ERR(pt)); 218 goto free_big; 219 } 220 221 tiny = xe_bo_create_pin_map(xe, tile, m->q->vm, → 222 2 * SZ_4K, 223 ttm_bo_type_kernel, 224 XE_BO_FLAG_VRAM_IF_DGFX(tile) | 225 XE_BO_FLAG_PINNED); → 226 if (IS_ERR(tiny)) { → 227 KUNIT_FAIL(test, "Failed to allocate fake pt: %li\n", → 228 PTR_ERR(pt)); 229 goto free_pt; 230 } Now, the IS_ERR(tiny) and the corresponding PTR_ERR(pt) do not match. Returning PTR_ERR(tiny), as the last failed function call, seems logical. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241121212057.1526634-2-mtodorovac69@gmail.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit cb57c75098c1c449a007ba301f9073f96febaaa9) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-12-12Merge tag 'for-net-2024-12-12' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - SCO: Fix transparent voice setting - ISO: Locking fixes - hci_core: Fix sleeping function called from invalid context - hci_event: Fix using rcu_read_(un)lock while iterating - btmtk: avoid UAF in btmtk_process_coredump * tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btmtk: avoid UAF in btmtk_process_coredump Bluetooth: iso: Fix circular lock in iso_conn_big_sync Bluetooth: iso: Fix circular lock in iso_listen_bis Bluetooth: SCO: Add support for 16 bits transparent voice setting Bluetooth: iso: Fix recursive locking warning Bluetooth: iso: Always release hdev at the end of iso_listen_bis Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating Bluetooth: hci_core: Fix sleeping function called from invalid context Bluetooth: Improve setsockopt() handling of malformed user input ==================== Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-12net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundariesJesse Van Gavere
Commit 8d7ae22ae9f8 ("net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix for KSZ9896 is adapted from there as the same errata is present in KSZ9896C as "Module 5: Certain PHY registers must be written as pairs instead of singly" the explanation below is likewise taken from this commit. The commit provided code to apply "Module 6: Certain PHY registers must be written as pairs instead of singly" errata for KSZ9477 as this chip for certain PHY registers (0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead of 16 or 8 bit access. Otherwise, adjacent registers (no matter if reserved or not) are overwritten with 0x0. Without this patch some registers (e.g. 0x113c or 0x1134) required for 32 bit access are out of valid regmap ranges. As a result, following error is observed and KSZ9896 is not properly configured: ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0 The solution is to modify regmap_reg_range to allow accesses with 4 bytes boundaries. Fixes: 5c844d57aa78 ("net: dsa: microchip: fix writes to phy registers >= 0x10") Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com> Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@scioteq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-12net: renesas: rswitch: fix initial MPIC register settingNikita Yushchenko
MPIC.PIS must be set per phy interface type. MPIC.LSC must be set per speed. Do that strictly per datasheet, instead of hardcoding MPIC.PIS to GMII. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20241211053012.368914-1-nikita.yoush@cogentembedded.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12Bluetooth: btmtk: avoid UAF in btmtk_process_coredumpThadeu Lima de Souza Cascardo
hci_devcd_append may lead to the release of the skb, so it cannot be accessed once it is called. ================================================================== BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk] Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82 CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024 Workqueue: events btusb_rx_work [btusb] Call Trace: <TASK> dump_stack_lvl+0xfd/0x150 print_report+0x131/0x780 kasan_report+0x177/0x1c0 btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01] btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 82: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 __kasan_slab_alloc+0x4e/0x60 kmem_cache_alloc+0x19f/0x360 skb_clone+0x132/0xf70 btusb_recv_acl_mtk+0x104/0x1a0 [btusb] btusb_rx_work+0x9e/0xe0 [btusb] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 Freed by task 1733: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 kasan_save_free_info+0x28/0xb0 ____kasan_slab_free+0xfd/0x170 kmem_cache_free+0x183/0x3f0 hci_devcd_rx+0x91a/0x2060 [bluetooth] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 The buggy address belongs to the object at ffff888033cfab40 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 112 bytes inside of freed 232-byte region [ffff888033cfab40, ffff888033cfac28) The buggy address belongs to the physical page: page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0x4000000000000840(slab|head|zone=1) page_type: 0xffffffff() raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001 raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Check if we need to call hci_devcd_complete before calling hci_devcd_append. That requires that we check data->cd_info.cnt >= MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we increment data->cd_info.cnt only once the call to hci_devcd_append succeeds. Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12dma-buf: Fix __dma_buf_debugfs_list_del argument for !CONFIG_DEBUG_FST.J. Mercier
The arguments for __dma_buf_debugfs_list_del do not match for both the CONFIG_DEBUG_FS case and the !CONFIG_DEBUG_FS case. The !CONFIG_DEBUG_FS case should take a struct dma_buf *, but it's currently struct file *. This can lead to the build error: error: passing argument 1 of ‘__dma_buf_debugfs_list_del’ from incompatible pointer type [-Werror=incompatible-pointer-types] dma-buf.c:63:53: note: expected ‘struct file *’ but argument is of type ‘struct dma_buf *’ 63 | static void __dma_buf_debugfs_list_del(struct file *file) Fixes: bfc7bc539392 ("dma-buf: Do not build debugfs related code when !CONFIG_DEBUG_FS") Signed-off-by: T.J. Mercier <tjmercier@google.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241117170326.1971113-1-tjmercier@google.com
2024-12-12ACPICA: events/evxfregn: don't release the ContextMutex that was never acquiredDaniil Tatianin
This bug was first introduced in c27f3d011b08, where the author of the patch probably meant to do DeleteMutex instead of ReleaseMutex. The mutex leak was noticed later on and fixed in e4dfe108371, but the bogus MutexRelease line was never removed, so do it now. Link: https://github.com/acpica/acpica/pull/982 Fixes: c27f3d011b08 ("ACPICA: Fix race in generic_serial_bus (I2C) and GPIO op_region parameter handling") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Link: https://patch.msgid.link/20241122082954.658356-1-d-tatianin@yandex-team.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-12-12i2c: riic: Always round-up when calculating bus periodGeert Uytterhoeven
Currently, the RIIC driver may run the I2C bus faster than requested, which may cause subtle failures. E.g. Biju reported a measured bus speed of 450 kHz instead of the expected maximum of 400 kHz on RZ/G2L. The initial calculation of the bus period uses DIV_ROUND_UP(), to make sure the actual bus speed never becomes faster than the requested bus speed. However, the subsequent division-by-two steps do not use round-up, which may lead to a too-small period, hence a too-fast and possible out-of-spec bus speed. E.g. on RZ/Five, requesting a bus speed of 100 resp. 400 kHz will yield too-fast target bus speeds of 100806 resp. 403226 Hz instead of 97656 resp. 390625 Hz. Fix this by using DIV_ROUND_UP() in the subsequent divisions, too. Tested on RZ/A1H, RZ/A2M, and RZ/Five. Fixes: d982d66514192cdb ("i2c: riic: remove clock and frequency restrictions") Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: <stable@vger.kernel.org> # v4.15+ Link: https://lore.kernel.org/r/c59aea77998dfea1b4456c4b33b55ab216fcbf5e.1732284746.git.geert+renesas@glider.be Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-12-12team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALLDaniel Borkmann
Similar to bonding driver, add NETIF_F_GSO_ENCAP_ALL to TEAM_VLAN_FEATURES in order to support slave devices which propagate NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM as vlan_features. Fixes: 3625920b62c3 ("teaming: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-5-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12team: Fix initial vlan_feature set in __team_compute_featuresDaniel Borkmann
Similarly as with bonding, fix the calculation of vlan_features to reuse netdev_base_features() in order derive the set in the same way as ndo_fix_features before iterating through the slave devices to refine the feature set. Fixes: 3625920b62c3 ("teaming: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-4-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALLDaniel Borkmann
Drivers like mlx5 expose NIC's vlan_features such as NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM which are later not propagated when the underlying devices are bonded and a vlan device created on top of the bond. Right now, the more cumbersome workaround for this is to create the vlan on top of the mlx5 and then enslave the vlan devices to a bond. To fix this, add NETIF_F_GSO_ENCAP_ALL to BOND_VLAN_FEATURES such that bond_compute_features() can probe and propagate the vlan_features from the slave devices up to the vlan device. Given the following bond: # ethtool -i enp2s0f{0,1}np{0,1} driver: mlx5_core [...] # ethtool -k enp2s0f0np0 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: on rx-udp-gro-forwarding: off # ethtool -k enp2s0f1np1 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: on rx-udp-gro-forwarding: off # ethtool -k bond0 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: off [fixed] rx-udp-gro-forwarding: off Before: # ethtool -k bond0.100 | grep udp tx-udp_tnl-segmentation: off [requested on] tx-udp_tnl-csum-segmentation: off [requested on] tx-udp-segmentation: on rx-udp_tunnel-port-offload: off [fixed] rx-udp-gro-forwarding: off After: # ethtool -k bond0.100 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: off [fixed] rx-udp-gro-forwarding: off Various users have run into this reporting performance issues when configuring Cilium in vxlan tunneling mode and having the combination of bond & vlan for the core devices connecting the Kubernetes cluster to the outside world. Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-3-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12bonding: Fix initial {vlan,mpls}_feature set in bond_compute_featuresDaniel Borkmann
If a bonding device has slave devices, then the current logic to derive the feature set for the master bond device is limited in that flags which are fully supported by the underlying slave devices cannot be propagated up to vlan devices which sit on top of bond devices. Instead, these get blindly masked out via current NETIF_F_ALL_FOR_ALL logic. vlan_features and mpls_features should reuse netdev_base_features() in order derive the set in the same way as ndo_fix_features before iterating through the slave devices to refine the feature set. Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing") Fixes: 2e770b507ccd ("net: bonding: Inherit MPLS features from slave devices") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-2-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12net, team, bonding: Add netdev_base_features helperDaniel Borkmann
Both bonding and team driver have logic to derive the base feature flags before iterating over their slave devices to refine the set via netdev_increment_features(). Add a small helper netdev_base_features() so this can be reused instead of having it open-coded multiple times. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241210141245.327886-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-11net: dsa: felix: fix stuck CPU-injected packets with short taprio windowsVladimir Oltean
With this port schedule: tc qdisc replace dev $send_if parent root handle 100 taprio \ num_tc 8 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ map 0 1 2 3 4 5 6 7 \ base-time 0 cycle-time 10000 \ sched-entry S 01 1250 \ sched-entry S 02 1250 \ sched-entry S 04 1250 \ sched-entry S 08 1250 \ sched-entry S 10 1250 \ sched-entry S 20 1250 \ sched-entry S 40 1250 \ sched-entry S 80 1250 \ flags 2 ptp4l would fail to take TX timestamps of Pdelay_Resp messages like this: increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug ptp4l[4134.168]: port 2: send peer delay response failed It turns out that the driver can't take their TX timestamps because it can't transmit them in the first place. And there's nothing special about the Pdelay_Resp packets - they're just regular 68 byte packets. But with this taprio configuration, the switch would refuse to send even the ETH_ZLEN minimum packet size. This should have definitely not been the case. When applying the taprio config, the driver prints: mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS and thus, everything under 132 bytes - ETH_FCS_LEN should have been sent without problems. Yet it's not. For the forwarding path, the configuration is fine, yet packets injected from Linux get stuck with this schedule no matter what. The first hint that the static guard bands are the cause of the problem is that reverting Michael Walle's commit 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode") made things work. It must be that the guard bands are calculated incorrectly. I remembered that there is a magic constant in the driver, set to 33 ns for no logical reason other than experimentation, which says "never let the static guard bands get so large as to leave less than this amount of remaining space in the time slot, because the queue system will refuse to schedule packets otherwise, and they will get stuck". I had a hunch that my previous experimentally-determined value was only good for packets coming from the forwarding path, and that the CPU injection path needed more. I came to the new value of 35 ns through binary search, after seeing that with 544 ns (the bit time required to send the Pdelay_Resp packet at gigabit) it works. Again, this is purely experimental, there's no logic and the manual doesn't say anything. The new driver prints for this schedule look like this: mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS So yes, the maximum MTU is now even smaller by 1 byte than before. This is maybe counter-intuitive, but makes more sense with a diagram of one time slot. Before: Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <----><----------------------------------------------> 33 ns 1217 ns static guard band useful Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <-----><---------------------------------------------> 35 ns 1215 ns static guard band useful The static guard band implemented by this switch hardware directly determines the maximum allowable MTU for that traffic class. The larger it is, the earlier the switch will stop scheduling frames for transmission, because otherwise they might overrun the gate close time (and avoiding that is the entire purpose of Michael's patch). So, we now have guard bands smaller by 2 ns, thus, in this particular case, we lose a byte of the maximum MTU. Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://patch.msgid.link/20241210132640.3426788-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: usb: qmi_wwan: add Telit FE910C04 compositionsDaniele Palmas
Add the following Telit FE910C04 compositions: 0x10c0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c8: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c8 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://patch.msgid.link/20241209151821.3688829-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: mana: Fix irq_contexts memory leak in mana_gd_setup_irqsMaxim Levitsky
gc->irq_contexts is not freeded if one of the later operations fail. Suggested-by: Michael Kelley <mhklinux@outlook.com> Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Link: https://patch.msgid.link/20241209175751.287738-3-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: mana: Fix memory leak in mana_gd_setup_irqsMaxim Levitsky
Commit 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") added memory allocation in mana_gd_setup_irqs of 'irqs' but the code doesn't free this temporary array in the success path. This was caught by kmemleak. Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Link: https://patch.msgid.link/20241209175751.287738-2-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11udmabuf: fix memory leak on last export_udmabuf() error pathJann Horn
In export_udmabuf(), if dma_buf_fd() fails because the FD table is full, a dma_buf owning the udmabuf has already been created; but the error handling in udmabuf_create() will tear down the udmabuf without doing anything about the containing dma_buf. This leaves a dma_buf in memory that contains a dangling pointer; though that doesn't seem to lead to anything bad except a memory leak. Fix it by moving the dma_buf_fd() call out of export_udmabuf() so that we can give it different error handling. Note that the shape of this code changed a lot in commit 5e72b2b41a21 ("udmabuf: convert udmabuf driver to use folios"); but the memory leak seems to have existed since the introduction of udmabuf. Fixes: fbb0de795078 ("Add udmabuf misc device") Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241204-udmabuf-fixes-v2-3-23887289de1c@google.com
2024-12-11udmabuf: also check for F_SEAL_FUTURE_WRITEJann Horn
When F_SEAL_FUTURE_WRITE was introduced, it was overlooked that udmabuf must reject memfds with this flag, just like ones with F_SEAL_WRITE. Fix it by adding F_SEAL_FUTURE_WRITE to SEALS_DENIED. Fixes: ab3948f58ff8 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") Cc: stable@vger.kernel.org Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241204-udmabuf-fixes-v2-2-23887289de1c@google.com
2024-12-11udmabuf: fix racy memfd sealing checkJann Horn
The current check_memfd_seals() is racy: Since we first do check_memfd_seals() and then udmabuf_pin_folios() without holding any relevant lock across both, F_SEAL_WRITE can be set in between. This is problematic because we can end up holding pins to pages in a write-sealed memfd. Fix it using the inode lock, that's probably the easiest way. In the future, we might want to consider moving this logic into memfd, especially if anyone else wants to use memfd_pin_folios(). Reported-by: Julian Orth <ju.orth@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219106 Closes: https://lore.kernel.org/r/CAG48ez0w8HrFEZtJkfmkVKFDhE5aP7nz=obrimeTgpD+StkV9w@mail.gmail.com Fixes: fbb0de795078 ("Add udmabuf misc device") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241204-udmabuf-fixes-v2-1-23887289de1c@google.com
2024-12-11Merge tag 'vfio-v6.13-rc3' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: - Fix migration dirty page tracking support in the mlx5-vfio-pci variant driver in configurations where the system page size exceeds the device maximum message size, and anticipate device updates where the opposite may also be required (Yishai Hadas) * tag 'vfio-v6.13-rc3' of https://github.com/awilliam/linux-vfio: vfio/mlx5: Align the page tracking max message size with the device capability
2024-12-11EDAC/amd64: Simplify ECC check on unified memory controllersBorislav Petkov (AMD)
The intent of the check is to see whether at least one UMC has ECC enabled. So do that instead of tracking which ones are enabled in masks which are too small in size anyway and lead to not loading the driver on Zen4 machines with UMCs enabled over UMC8. Fixes: e2be5955a886 ("EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh") Reported-by: Avadhut Naik <avadhut.naik@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Avadhut Naik <avadhut.naik@amd.com> Reviewed-by: Avadhut Naik <avadhut.naik@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20241210212054.3895697-1-avadhut.naik@amd.com
2024-12-11media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_regNikita Zhandarovich
Syzbot reports [1] an uninitialized value issue found by KMSAN in dib3000_read_reg(). Local u8 rb[2] is used in i2c_transfer() as a read buffer; in case that call fails, the buffer may end up with some undefined values. Since no elaborate error handling is expected in dib3000_write_reg(), simply zero out rb buffer to mitigate the problem. [1] Syzkaller report dvb-usb: bulk message failed: -22 (6/0) ===================================================== BUG: KMSAN: uninit-value in dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 dibusb_dib3000mb_frontend_attach+0x155/0x2f0 drivers/media/usb/dvb-usb/dibusb-mb.c:31 dvb_usb_adapter_frontend_init+0xed/0x9a0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:90 [inline] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:186 [inline] dvb_usb_device_init+0x25a8/0x3760 drivers/media/usb/dvb-usb/dvb-usb-init.c:310 dibusb_probe+0x46/0x250 drivers/media/usb/dvb-usb/dibusb-mb.c:110 ... Local variable rb created at: dib3000_read_reg+0x86/0x4e0 drivers/media/dvb-frontends/dib3000mb.c:54 dib3000mb_attach+0x123/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 ... Fixes: 74340b0a8bc6 ("V4L/DVB (4457): Remove dib3000-common-module") Reported-by: syzbot+c88fc0ebe0d5935c70da@syzkaller.appspotmail.com Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://lore.kernel.org/r/20240517155800.9881-1-n.zhandarovich@fintech.ru Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-12-11platform/x86/intel/vsec: Add support for Panther LakeXi Pardee
Add Panther Lake PMT telemetry support. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://lore.kernel.org/r/20241210212646.239211-1-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-12-11platform/x86/intel/ifs: Add Clearwater Forest to CPU support listJithu Joseph
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to the x86 match table of Intel In Field Scan (IFS) driver, enabling IFS functionality on this processor. Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Link: https://lore.kernel.org/r/20241210203152.1136463-1-jithu.joseph@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-12-11platform/x86: touchscreen_dmi: Add info for SARY Tab 3 tabletHuy Minh
There's no info about the OEM behind the tablet, only online stores listing. This tablet uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB of storage. Signed-off-by: Huy Minh <buingoc67@gmail.com> Link: https://lore.kernel.org/r/20241210154500.32124-1-buingoc67@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-12-11USB: serial: option: add Telit FE910C04 rmnet compositionsDaniele Palmas
Add the following Telit FE910C04 compositions: 0x10c0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c8: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c8 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-12-11USB: serial: option: add MediaTek T7XX compositionsJack Wu
Add the MediaTek T7XX compositions: T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 74 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=7129 Rev= 0.01 S: Manufacturer=MediaTek Inc. S: Product=USB DATA CARD S: SerialNumber=004402459035402 C:* #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms ------------------------------- | If Number | Function | ------------------------------- | 2 | USB AP Log Port | ------------------------------- | 3 | USB AP GNSS Port| ------------------------------- | 4 | USB AP META Port| ------------------------------- | 5 | ADB port | ------------------------------- | 6 | USB MD AT Port | ------------------------------ | 7 | USB MD META Port| ------------------------------- | 8 | USB NTZ Port | ------------------------------- | 9 | USB Debug port | ------------------------------- Signed-off-by: Jack Wu <wojackbb@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-12-11USB: serial: option: add Netprisma LCUK54 modules for WWAN ReadyMank Wang
LCUK54-WRD's pid/vid 0x3731/0x010a 0x3731/0x010c LCUK54-WWD's pid/vid 0x3731/0x010b 0x3731/0x010d Above products use the exact same interface layout and option driver: MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=3731 ProdID=0101 Rev= 5.04 S: Manufacturer=NetPrisma S: Product=LCUK54-WRD S: SerialNumber=feeba631 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Mank Wang <mank.wang@netprisma.com> [ johan: use lower case hex notation ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-12-11USB: serial: option: add MeiG Smart SLM770AMichal Hrusecky
Update the USB serial option driver to support MeiG Smart SLM770A. ID 2dee:4d57 Marvell Mobile Composite Device Bus T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2dee ProdID=4d57 Rev= 1.00 S: Manufacturer=Marvell S: Product=Mobile Composite Device Bus C:* #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0e(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested successfully connecting to the Internet via rndis interface after dialing via AT commands on If#=3 or If#=4. Not sure of the purpose of the other serial interfaces. Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-12-11USB: serial: option: add TCL IK512 MBIM & ECMDaniel Swanemar
Add the following TCL IK512 compositions: 0x0530: Modem + Diag + AT + MBIM T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=10000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=1bbb ProdID=0530 Rev=05.04 S: Manufacturer=TCL S: Product=TCL 5G USB Dongle S: SerialNumber=3136b91a C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms 0x0640: ECM + Modem + Diag + AT T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=10000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=1bbb ProdID=0640 Rev=05.04 S: Manufacturer=TCL S: Product=TCL 5G USB Dongle S: SerialNumber=3136b91a C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Daniel Swanemar <d.swanemar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-12-11thunderbolt: Don't display nvm_version unless upgrade supportedMario Limonciello
The read will never succeed if NVM wasn't initialized due to an unknown format. Add a new callback for visibility to only show when supported. Cc: stable@vger.kernel.org Fixes: aef9c693e7e5 ("thunderbolt: Move vendor specific NVM handling into nvm.c") Reported-by: Richard Hughes <hughsient@gmail.com> Closes: https://github.com/fwupd/fwupd/issues/8200 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-12-10net: renesas: rswitch: handle stop vs interrupt raceNikita Yushchenko
Currently the stop routine of rswitch driver does not immediately prevent hardware from continuing to update descriptors and requesting interrupts. It can happen that when rswitch_stop() executes the masking of interrupts from the queues of the port being closed, napi poll for that port is already scheduled or running on a different CPU. When execution of this napi poll completes, it will unmask the interrupts. And unmasked interrupt can fire after rswitch_stop() returns from napi_disable() call. Then, the handler won't mask it, because napi_schedule_prep() will return false, and interrupt storm will happen. This can't be fixed by making rswitch_stop() call napi_disable() before masking interrupts. In this case, the interrupt storm will happen if interrupt fires between napi_disable() and masking. Fix this by checking for priv->opened_ports bit when unmasking interrupts after napi poll. For that to be consistent, move priv->opened_ports changes into spinlock-protected areas, and reorder other operations in rswitch_open() and rswitch_stop() accordingly. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Link: https://patch.msgid.link/20241209113204.175015-1-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: avoid use-after-put for a device tree nodeNikita Yushchenko
The device tree node saved in the rswitch_device structure is used at several driver locations. So passing this node to of_node_put() after the first use is wrong. Move of_node_put() for this node to exit paths. Fixes: b46f1e579329 ("net: renesas: rswitch: Simplify struct phy * handling") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-5-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: fix leaked pointer on error pathNikita Yushchenko
If error path is taken while filling descriptor for a frame, skb pointer is left in the entry. Later, on the ring entry reuse, the same entry could be used as a part of a multi-descriptor frame, and skb for that new frame could be stored in a different entry. Then, the stale pointer will reach the completion routine, and passed to the release operation. Fix that by clearing the saved skb pointer at the error path. Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-4-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: fix race window between tx start and completeNikita Yushchenko
If hardware is already transmitting, it can start handling the descriptor being written to immediately after it observes updated DT field, before the queue is kicked by a write to GWTRC. If the start_xmit() execution is preempted at unfortunate moment, this transmission can complete, and interrupt handled, before gq->cur gets updated. With the current implementation of completion, this will cause the last entry not completed. Fix that by changing completion loop to check DT values directly, instead of depending on gq->cur. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-3-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: fix possible early skb releaseNikita Yushchenko
When sending frame split into multiple descriptors, hardware processes descriptors one by one, including writing back DT values. The first descriptor could be already marked as completed when processing of next descriptors for the same frame is still in progress. Although only the last descriptor is configured to generate interrupt, completion of the first descriptor could be noticed by the driver when handling interrupt for the previous frame. Currently, driver stores skb in the entry that corresponds to the first descriptor. This results into skb could be unmapped and freed when hardware did not complete the send yet. This opens a window for corrupting the data being sent. Fix this by saving skb in the entry that corresponds to the last descriptor used to send the frame. Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-2-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-19 17:07:29 +0000