summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-04-25Merge tag 'usb-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes and new device ids for 6.15-rc4. Nothing major in here, just the normal set of issues that have cropped up after -rc1: - new device ids for usb-serial drivers - new device quirks added - typec driver fixes - chipidea driver fixes - xhci driver fixes - wdm driver fixes - cdns3 driver fixes - MAINTAINERS file update All of these, except for the MAINTAINERS file update, have been in linux-next for a while with no reported issues" * tag 'usb-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits) MAINTAINERS: Assign maintainer for the port controller drivers USB: serial: simple: add OWON HDS200 series oscilloscope support USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe USB: serial: option: add Sierra Wireless EM9291 usb: typec: class: Unlocked on error in typec_register_partner() usb: quirks: Add delay init quirk for SanDisk 3.2Gen1 Flash Drive USB: wdm: add annotation USB: wdm: wdm_wwan_port_tx_complete mutex in atomic context USB: wdm: close race between wdm_open and wdm_wwan_port_stop USB: wdm: handle IO errors in wdm_wwan_port_start USB: VLI disk crashes if LPM is used usb: dwc3: gadget: check that event count does not exceed event buffer length USB: storage: quirk for ADATA Portable HDD CH94 usb: quirks: add DELAY_INIT quirk for Silicon Motion Flash Drive USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02) usb: dwc3: xilinx: Prevent spike in reset signal usb: cdns3: Fix deadlock when using NCM gadget usb: chipidea: ci_hdrc_imx: implement usb_phy_init() error handling usb: chipidea: ci_hdrc_imx: fix call balance of regulator routines usb: chipidea: ci_hdrc_imx: fix usbmisc handling ...
2025-04-25Merge tag 'tty-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are three small tty/serial driver fixes for 6.15-rc4 to resolve some reported issues. They are: - permissions change for TIOCL_SELMOUSEREPORT to resolve a relaxing of permissions that showed up 6.14 that wasn't _quite_ right. - sifive serial driver fix - msm serial driver fix All of these have been in linux-next for over a week with no reported issues" * tag 'tty-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sifive: lock port in startup()/shutdown() callbacks tty: Require CAP_SYS_ADMIN for all usages of TIOCL_SELMOUSEREPORT serial: msm: Configure correct working mode before starting earlycon
2025-04-25Merge tag 'char-misc-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes to resolve reported problems for 6.15-rc4. Included in here are: - misc chrdev region range fix reported by many people - nvmem driver fixes and dt updates - mei new device id and fixes - comedi driver fix - pps driver fix - binder debug log fix - pci1xxxx driver fixes - firmware driver fix All of these have been in linux-next for over a week with no reported issues" * tag 'char-misc-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits) firmware: stratix10-svc: Add of_platform_default_populate() mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type mei: vsc: Fix fortify-panic caused by invalid counted_by() use pps: generators: tio: fix platform_set_drvdata() mcb: fix a double free bug in chameleon_parse_gdd() misc: microchip: pci1xxxx: Fix incorrect IRQ status handling during ack misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration char: misc: register chrdev region with all possible minors mei: me: add panther lake H DID comedi: jr3_pci: Fix synchronous deletion of timer binder: fix offset calculation in debug log intel_th: avoid using deprecated page->mapping, index fields dt-bindings: nvmem: Add compatible for MSM8960 dt-bindings: nvmem: Add compatible for IPQ5018 nvmem: qfprom: switch to 4-byte aligned reads nvmem: core: update raw_len if the bit reading is required nvmem: core: verify cell's raw_len nvmem: core: fix bit offsets of more than one byte dt-bindings: nvmem: fixed-cell: increase bits start value to 31 dt-bindings: nvmem: Add compatible for MS8937 ...
2025-04-25Merge tag 'driver-core-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core fixes to resolve a number of reported problems. Included in here are: - driver core sync fix revert to resolve a much reported problem, hopefully this is finally resolved - MAINTAINERS file update, documenting that the driver-core tree is now under a "shared" maintainership model, thanks to Rafael and Danilo for offering to do this! - auxbus documentation and MAINTAINERS file update - MAINTAINERS file update for Rust PCI code - firmware rust binding fixup - software node link fix All of these have been in linux-next for over a week with no reported issues" * tag 'driver-core-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: drivers/base/memory: Avoid overhead from for_each_present_section_nr() software node: Prevent link creation failure from causing kobj reference count imbalance device property: Add a note to the fwnode.h drivers/base: Add myself as auxiliary bus reviewer drivers/base: Extend documentation with preferred way to use auxbus driver core: fix potential NULL pointer dereference in dev_uevent() driver core: introduce device_set_driver() helper Revert "drivers: core: synchronize really_probe() and dev_uevent()" MAINTAINERS: update the location of the driver-core git tree rust: firmware: Use `ffi::c_char` type in `FwFunc` MAINTAINERS: pci: add entry for Rust PCI code
2025-04-25cpufreq: ACPI: Re-sync CPU boost state on system resumeViresh Kumar
During CPU hotunplug events (such as those occurring during suspend/resume cycles), platform firmware may modify the CPU boost state. If boost was disabled prior to CPU removal, it correctly remains disabled upon re-plug. However, if firmware re-enables boost while the CPU is offline, the CPU may return with boost enabled—even if it was originally disabled—once it is hotplugged back in. This leads to inconsistent behavior and violates user or kernel policy expectations. To maintain consistency, ensure the boost state is re-synchronized with the kernel policy when a CPU is hotplugged back in. Note: This re-synchronization is not necessary during the initial call to ->init() for a CPU, as the cpufreq core handles it via cpufreq_online(). At that point, acpi_cpufreq_driver.boost_enabled is initialized to the value returned by boost_state(0). Fixes: 2b16c631832d ("cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init()") Reported-by: Nicholas Chin <nic.c3.14@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220013 Tested-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://patch.msgid.link/9c7de55fb06015c1b77e7dafd564b659838864e0.1745511526.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-04-25drm/i915/vga: Consolidate intel_vga_disable() callsVille Syrjälä
Currently we disable the VGA plane from various places, sometimes multiple times in the same init/resume sequence. Get rid of all this mess and do it just once. The most correct place seems to be just after intel_early_display_was() as that one applies various workarounds that need to be in place before we touch any planes (including the VGA plane). Actually, we do still have a second caller in vlv_display_power_well_init(). I think we still need that as the reset value of VGACNTR is 0x0 and thus technically the VGA plane will be (at least partially) enabled after the power well has been toggled. In both cases we have the necessary power reference already held (INIT power domain for load/resume case, and the display power well itself being what we need for vlv_display_power_well_init()). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-04-25drm/i915/vga: Nuke vga_redisable_power_on()Ville Syrjälä
Now that intel_vga_disable() itself will print a debug message, intel_vga_redisable_power_on() is completely redundant. Get rid of it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-04-25drm/i915/vga: Include the current pipe in the VGA disable debug messageVille Syrjälä
Add some debugs to the VGA plane disable so that we can at least see from the logs when it happens (and on which pipe). I was curious about this at some point when I was seeing some random underruns near the time when we disable the VGA plane, but I think in the end that turned out to be a red herring. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-04-25drm/i915/vga: Extract intel_vga_regs.hVille Syrjälä
Extract the VGACNTR register definitions into their own header file, to declutter i915_reg.h a bit. v2: Group the register offst definitions together (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-04-25drm/i915/vga: Add more VGACNTRL bitsVille Syrjälä
Define a pile of extra VGACNTRL bits. We don't really have any real use for most of these but nicer to have them all in one place rather than trawling the specs when one wants to know what's in there. I will have some real use for the CHV pipe select bits later. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-04-25drm/i915/vga: Clean up VGACNTRL bitsVille Syrjälä
Use REG_BIT() & co. for the VGACNTRL register bits. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250417114454.12836-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-04-25spi: spi-mem: Add fix to avoid divide errorRaju Rangoju
For some SPI flash memory operations, dummy bytes are not mandatory. For example, in Winbond SPINAND flash memory devices, the `write_cache` and `update_cache` operation variants have zero dummy bytes. Calculating the duration for SPI memory operations with zero dummy bytes causes a divide error when `ncycles` is calculated in the spi_mem_calc_op_duration(). Add changes to skip the 'ncylcles' calculation for zero dummy bytes. Following divide error is fixed by this change: Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI ... ? do_trap+0xdb/0x100 ? do_error_trap+0x75/0xb0 ? spi_mem_calc_op_duration+0x56/0xb0 ? exc_divide_error+0x3b/0x70 ? spi_mem_calc_op_duration+0x56/0xb0 ? asm_exc_divide_error+0x1b/0x20 ? spi_mem_calc_op_duration+0x56/0xb0 ? spinand_select_op_variant+0xee/0x190 [spinand] spinand_match_and_init+0x13e/0x1a0 [spinand] spinand_manufacturer_match+0x6e/0xa0 [spinand] spinand_probe+0x357/0x7f0 [spinand] ? kernfs_activate+0x87/0xd0 spi_mem_probe+0x7a/0xb0 spi_probe+0x7d/0x130 Fixes: 226d6cb3cb79 ("spi: spi-mem: Estimate the time taken by operations") Suggested-by: Krishnamoorthi M <krishnamoorthi.m@amd.com> Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com> Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250424121333.417372-1-Raju.Rangoju@amd.com Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-25devtmpfs: don't use vfs_getattr_nosec to query i_modeChristoph Hellwig
The recent move of the bdev_statx call to the low-level vfs_getattr_nosec helper caused it being used by devtmpfs, which leads to deadlocks in md teardown due to the block device lookup and put interfering with the unusual lifetime rules in md. But as handle_remove only works on inodes created and owned by devtmpfs itself there is no need to use vfs_getattr_nosec vs simply reading the mode from the inode directly. Switch to that to avoid the bdev lookup or any other unintentional side effect. Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reported-by: Xiao Ni <xni@redhat.com> Fixes: 777d0961ff95 ("fs: move the bdex_statx call to vfs_getattr_nosec") Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/20250423045941.1667425-1-hch@lst.de Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Xiao Ni <xni@redhat.com> Tested-by: Ayush Jain <Ayush.jain3@amd.com> Tested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-25accel/ivpu: Fix the D0i2 disable test modeAndrzej Kacprowski
Correct setup of D0i2 disable which was by mistake set up to value 1 and use BIT(1) instead. Fixes: 011529fe8112 ("accel/ivpu: Implement D0i2 disable test mode") Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@linux.intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250416102629.384626-1-maciej.falkowski@linux.intel.com
2025-04-25accel/ivpu: Correct DCT interrupt handlingKarol Wachowski
Fix improper use of dct_active_percent field in DCT interrupt handler causing DCT to never get enabled. Set dct_active_percent internally before IPC to ensure correct driver value even if IPC fails. Set default DCT value to 30 accordingly to HW architecture specification. Fixes: a19bffb10c46 ("accel/ivpu: Implement DCT handling") Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250416102616.384577-1-maciej.falkowski@linux.intel.com
2025-04-25accel/ivpu: Implement heartbeat-based TDR mechanismKarol Wachowski
Introduce a heartbeat-based Timeout Detection and Recovery (TDR) mechanism. The enhancement aims to improve the reliability of device hang detection by monitoring heartbeat updates. Each progressing inference will update heartbeat counter allowing driver to monitor its progression. Limit maximum number of reschedules when heartbeat indicates progression to 30. This increases the maximum running time of single inference to about 60 seconds. The heartbeat mechanism provides a more robust method for detecting device hangs, potentially reducing false positive recoveries due to long running inferences. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250416102555.384526-1-maciej.falkowski@linux.intel.com
2025-04-24ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmdMing Lei
ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but we may have scheduled task work via io_uring_cmd_complete_in_task() for dispatching request, then kernel crash can be triggered. Fix it by not trying to canceling the command if ublk block request is started. Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd") Reported-by: Jared Holzman <jholzman@nvidia.com> Tested-by: Jared Holzman <jholzman@nvidia.com> Closes: https://lore.kernel.org/linux-block/d2179120-171b-47ba-b664-23242981ef19@nvidia.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250425013742.1079549-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-24ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATAMing Lei
We call io_uring_cmd_complete_in_task() to schedule task_work for handling UBLK_U_IO_NEED_GET_DATA. This way is really not necessary because the current context is exactly the ublk queue context, so call ublk_dispatch_req() directly for handling UBLK_U_IO_NEED_GET_DATA. Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd") Tested-by: Jared Holzman <jholzman@nvidia.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250425013742.1079549-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-24net/mlx5: E-switch, Fix error handling for enabling roceChris Mi
The cited commit assumes enabling roce always succeeds. But it is not true. Add error handling for it. Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250423083611.324567-6-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24net/mlx5e: Fix lock order in mlx5e_tx_reporter_ptpsq_unhealthy_recoverCosmin Ratiu
RTNL needs to be acquired before state_lock. Fixes: fdce06bda7e5 ("net/mlx5e: Acquire RTNL lock before RQs/SQs activation/deactivation") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250423083611.324567-5-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24net/mlx5e: TC, Continue the attr process even if encap entry is invalidJianbo Liu
Previously the offload of the rule with header rewrite and mirror to both internal and external destinations is skipped if the encap entry is not valid. But it shouldn't because driver will try to offload it again if neighbor is updated and encap entry is valid, to replace the old FTE added for slow path. But the extra split attr doesn't exist at that time as the process is skipped, driver then fails to offload it. To fix this issue, remove the checking and continue the attr process if encap entry is invalid. Fixes: b11bde56246e ("net/mlx5e: TC, Offload rewrite and mirror to both internal and external dests") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250423083611.324567-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24net/mlx5: E-Switch, Initialize MAC Address for Default GIDMaor Gottlieb
Initialize the source MAC address when creating the default GID entry. Since this entry is used only for loopback traffic, it only needs to be a unicast address. A zeroed-out MAC address is sufficient for this purpose. Without this fix, random bits would be assigned as the source address. If these bits formed a multicast address, the firmware would return an error, preventing the user from switching to switchdev mode: Error: mlx5_core: Failed setting eswitch to offloads. kernel answers: Invalid argument Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250423083611.324567-3-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24net/mlx5e: Use custom tunnel header for vxlan gbpVlad Dogaru
Symbolic (e.g. "vxlan") and custom (e.g. "tunnel_header_0") tunnels cannot be combined, but the match params interface does not have fields for matching on vxlan gbp. To match vxlan bgp, the tc_tun layer uses tunnel_header_0. Allow matching on both VNI and GBP by matching the VNI with a custom tunnel header instead of the symbolic field name. Matching solely on the VNI continues to use the symbolic field name. Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling") Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250423083611.324567-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24drm/xe: Abort printing coredump in VM printer output if fullMatthew Brost
Abort printing coredump in VM printer output if full. Helps speedup large coredumps which need to walked multiple times in xe_devcoredump_read. v2: - s/drm_printer_is_full/drm_coredump_printer_is_full (Jani) Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250423171725.597955-5-matthew.brost@intel.com
2025-04-24drm/xe: Update xe_ttm_access_memory to use GPU for non-visible accessMatthew Brost
Add migrate layer functions to access VRAM and update xe_ttm_access_memory to use for non-visible access and large (more than 16k) BO access. 8G devcoreump on BMG observed 3 minute CPU copy time vs. 3s GPU copy time. v4: - Fix non-page aligned accesses - Add support for small / unaligned access - Update commit message indicating migrate used for large accesses (Auld) - Fix warning in xe_res_cursor for non-zero offset v5: - Fix 32 bit build (CI) v6: - Rebase and use SVM migration copy functions v7: - Fix build error (CI) v8: - Remove ifdef around VRAM copy functions (CI) - Use break statement in dma unmmaping (Jonathan) - Use if/else rather than goto (Jonathan) - Use single return point (Jonathan) Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250423171725.597955-3-matthew.brost@intel.com
2025-04-24drm/xe: Add devcoredump chunkingMatthew Brost
Chunk devcoredump into 1.5G pieces to avoid hitting the kvmalloc limit of 2G. Simple algorithm reads 1.5G at time in xe_devcoredump_read callback as needed. Some memory allocations are changed to GFP_ATOMIC as they done in xe_devcoredump_read which holds lock in the path of reclaim. The allocations are small, so in practice should never fail. v2: - Update commit message wrt gfp atomic (John H) v6: - Drop GFP_ATOMIC change for hwconfig (John H) Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250423171725.597955-2-matthew.brost@intel.com
2025-04-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "The single core change is an obvious bug fix (and falls within the LF guidelines for patches from sanctioned entities). The other driver changes are a bit larger but likewise pretty obvious" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpi3mr: Add level check to control event logging scsi: ufs: core: Add NULL check in ufshcd_mcq_compl_pending_transfer() scsi: core: Clear flags for scsi_cmnd that did not complete scsi: ufs: Introduce quirk to extend PA_HIBERN8TIME for UFS devices scsi: ufs: qcom: Add quirks for Samsung UFS devices scsi: target: iscsi: Fix timeout on deleted connection scsi: mpi3mr: Reset the pending interrupt flag scsi: mpi3mr: Fix pending I/O counter scsi: ufs: mcq: Add NULL check in ufshcd_mcq_abort()
2025-04-24vxlan: vnifilter: Fix unlocked deletion of default FDB entryIdo Schimmel
When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB entry associated with the default remote (assuming one was configured) is deleted without holding the hash lock. This is wrong and will result in a warning [1] being generated by the lockdep annotation that was added by commit ebe642067455 ("vxlan: Create wrappers for FDB lookup"). Reproducer: # ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1 # bridge vni add vni 10010 remote 198.51.100.1 dev vx0 # bridge vni del vni 10010 dev vx0 Fix by acquiring the hash lock before the deletion and releasing it afterwards. Blame the original commit that introduced the issue rather than the one that exposed it. [1] WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0 [...] RIP: 0010:vxlan_find_mac+0x17f/0x1a0 [...] Call Trace: <TASK> __vxlan_fdb_delete+0xbe/0x560 vxlan_vni_delete_group+0x2ba/0x940 vxlan_vni_del.isra.0+0x15f/0x580 vxlan_process_vni_filter+0x38b/0x7b0 vxlan_vnifilter_process+0x3bb/0x510 rtnetlink_rcv_msg+0x2f7/0xb70 netlink_rcv_skb+0x131/0x360 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x121/0x1b0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250423145131.513029-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24Merge tag 'wireless-2025-04-24' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Some more fixes, notably: * iwlwifi: various regression and iwlmld fixes * mac80211: fix TX frames in monitor mode * brcmfmac: error handling for firmware load * tag 'wireless-2025-04-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: restore missing initialization of async_handlers_list wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release wifi: iwlwifi: fix the check for the SCRATCH register upon resume wifi: iwlwifi: don't warn if the NIC is gone in resume wifi: iwlwifi: mld: fix BAID validity check wifi: iwlwifi: back off on continuous errors wifi: iwlwifi: mld: only create debugfs symlink if it does not exist wifi: iwlwifi: mld: inform trans on init failure wifi: iwlwifi: mld: properly handle async notification in op mode start Revert "wifi: iwlwifi: make no_160 more generic" Revert "wifi: iwlwifi: add support for BE213" wifi: mac80211: restore monitor for outgoing frames ==================== Link: https://patch.msgid.link/20250424120535.56499-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24Merge tag 'net-6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "No fixes from any subtree. Current release - regressions: - net: fix the missing unlock for detached devices Previous releases - regressions: - sched: fix UAF vulnerability in HFSC qdisc - lwtunnel: disable BHs when required - mptcp: pm: defer freeing of MPTCP userspace path manager entries - tipc: fix NULL pointer dereference in tipc_mon_reinit_self() - eth: virtio-net: disable delayed refill when pausing rx Previous releases - always broken: - phylink: fix suspend/resume with WoL enabled and link down - eth: - mlx5: fix null-ptr-deref in mlx5_create_{inner_,}ttc_table() - xen-netfront: handle NULL returned by xdp_convert_buff_to_frame() - enetc: fix frame corruption on bpf_xdp_adjust_head/tail() and XDP_PASS - stmmac: fix dwmac1000 ptp timestamp status offset - pds_core: prevent possible adminq overflow/stuck condition Misc: - a bunch of MAINTAINERS updates" * tag 'net-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits) net: stmmac: fix multiplication overflow when reading timestamp net: stmmac: fix dwmac1000 ptp timestamp status offset net: dp83822: Fix OF_MDIO config check pds_core: make wait_context part of q_info pds_core: Remove unnecessary check in pds_client_adminq_cmd() pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result pds_core: Prevent possible adminq overflow/stuck condition net: dsa: mt7530: sync driver-specific behavior of MT7531 variants selftests/tc-testing: Add test for HFSC queue emptying during peek operation net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too net_sched: hfsc: Fix a UAF vulnerability in class handling selftests: mptcp: diag: use mptcp_lib_get_info_value mptcp: pm: Defer freeing of MPTCP userspace path manager entries net: ethernet: mtk_eth_soc: net: revise NETSYSv3 hardware configuration tipc: fix NULL pointer dereference in tipc_mon_reinit_self() virtio-net: disable delayed refill when pausing rx net: phy: leds: fix memory leak net: phylink: mac_link_(up|down)() clarifications net: phylink: fix suspend/resume with WoL enabled and link down net: lwtunnel: disable BHs when required ...
2025-04-24Merge tag 'v6.15-p5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Revert acomp multibuffer tests which were buggy - Fix off-by-one regression in new scomp code - Lower quality setting on atmel-sha204a as it may not be random * tag 'v6.15-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: atmel-sha204a - Set hwrng quality to lowest possible crypto: scomp - Fix off-by-one bug when calculating last page Revert "crypto: testmgr - Add multibuffer acomp testing"
2025-04-24iommu/amd: WARN if KVM attempts to set vCPU affinity without posted intrruptsSean Christopherson
WARN if KVM attempts to set vCPU affinity when posted interrupts aren't enabled, as KVM shouldn't try to enable posting when they're unsupported, and the IOMMU driver darn well should only advertise posting support when AMD_IOMMU_GUEST_IR_VAPIC() is true. Note, KVM consumes is_guest_mode only on success. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20250404193923.1413163-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-04-24iommu/amd: Return an error if vCPU affinity is set for non-vCPU IRTESean Christopherson
Return -EINVAL instead of success if amd_ir_set_vcpu_affinity() is invoked without use_vapic; lying to KVM about whether or not the IRTE was configured to post IRQs is all kinds of bad. Fixes: d98de49a53e4 ("iommu/amd: Enable vAPIC interrupt remapping mode by default") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20250404193923.1413163-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-04-24spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase()Gabor Juhos
The qcom_spi_block_erase() function returns with error in case of failure. Change the qcom_spi_send_cmdaddr() function to propagate these errors to the callers instead of returning with success. Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://patch.msgid.link/20250423-qpic-snand-propagate-error-v1-1-4b26ed45fdb5@gmail.com Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-24drm: drv: implement __drm_dev_alloc()Danilo Krummrich
In the Rust DRM device abstraction we need to allocate a struct drm_device. Currently, there are two options, the deprecated drm_dev_alloc() (which does not support subclassing) and devm_drm_dev_alloc(). The latter supports subclassing, but also manages the initial reference through devres for the parent device. In Rust we want to conform with the subclassing pattern, but do not want to get the initial reference managed for us, since Rust has its own, idiomatic ways to properly deal with it. There are two options to achieve this. 1) Allocate the memory ourselves with a KBox. 2) Implement __drm_dev_alloc(), which supports subclassing, but is unmanged. While (1) would be possible, it would be cumbersome, since it would require exporting drm_dev_init() and drmm_add_final_kfree(). Hence, go with option (2) and implement __drm_dev_alloc(). Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20250410235546.43736-2-dakr@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-04-24Merge drm/drm-next into drm-xe-nextThomas Hellström
Backmerge to bring in linux 6.15-rc. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-04-24drm/imagination: Add reset controller support for GPU initializationMichal Wilczynski
All IMG Rogue GPUs include a reset line that participates in the power-up sequence. On some SoCs (e.g., T-Head TH1520 and Banana Pi BPI-F3), this reset line is exposed and must be driven explicitly to ensure proper initialization. On others, such as the currently supported TI SoC, the reset logic is handled in hardware or firmware without exposing the line directly. In platforms where the reset line is externally accessible, if it is not driven correctly, the GPU may remain in an undefined state, leading to instability or performance issues. This commit adds a dedicated reset controller to the drm/imagination driver. By managing the reset line (where applicable) as part of normal GPU bring-up, the driver ensures reliable initialization across platforms regardless of whether the reset is controlled externally or handled internally. Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com> Reviewed-by: Matt Coster <matt.coster@imgtec.com> Link: https://lore.kernel.org/r/20250418-apr_18_reset_img-v6-2-85a06757b698@samsung.com Signed-off-by: Matt Coster <matt.coster@imgtec.com>
2025-04-24drm/imagination: avoid unused-const-variable warningArnd Bergmann
When CONFIG_DEBUG_FS is disabled, the stid_fmts[] array is not referenced anywhere, causing a W=1 warning with gcc: In file included from drivers/gpu/drm/imagination/pvr_fw_trace.c:7: drivers/gpu/drm/imagination/pvr_rogue_fwif_sf.h:75:39: error: 'stid_fmts' defined but not used [-Werror=unused-const-variable=] 75 | static const struct rogue_km_stid_fmt stid_fmts[] = { | ^~~~~~~~~ Rather than adding more #ifdef blocks, address this by changing the existing #ifdef into equivalent IS_ENABLED() checks so gcc can see where the symbol is used but still eliminate it from the object file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matt Coster <matt.coster@imgtec.com> Link: https://lore.kernel.org/r/20250409122314.2848028-1-arnd@kernel.org Signed-off-by: Matt Coster <matt.coster@imgtec.com>
2025-04-24net: stmmac: fix multiplication overflow when reading timestampAlexis Lothoré
The current way of reading a timestamp snapshot in stmmac can lead to integer overflow, as the computation is done on 32 bits. The issue has been observed on a dwmac-socfpga platform returning chaotic timestamp values due to this overflow. The corresponding multiplication is done with a MUL instruction, which returns 32 bit values. Explicitly casting the value to 64 bits replaced the MUL with a UMLAL, which computes and returns the result on 64 bits, and so returns correctly the timestamps. Prevent this overflow by explicitly casting the intermediate value to u64 to make sure that the whole computation is made on u64. While at it, apply the same cast on the other dwmac variant (GMAC4) method for snapshot retrieval. Fixes: 477c3e1f6363 ("net: stmmac: Introduce dwmac1000 timestamping operations") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250423-stmmac_ts-v2-2-e2cf2bbd61b1@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24net: stmmac: fix dwmac1000 ptp timestamp status offsetAlexis Lothore
When a PTP interrupt occurs, the driver accesses the wrong offset to learn about the number of available snapshots in the FIFO for dwmac1000: it should be accessing bits 29..25, while it is currently reading bits 19..16 (those are bits about the auxiliary triggers which have generated the timestamps). As a consequence, it does not compute correctly the number of available snapshots, and so possibly do not generate the corresponding clock events if the bogus value ends up being 0. Fix clock events generation by reading the correct bits in the timestamp register for dwmac1000. Fixes: 477c3e1f6363 ("net: stmmac: Introduce dwmac1000 timestamping operations") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250423-stmmac_ts-v2-1-e2cf2bbd61b1@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24net: dp83822: Fix OF_MDIO config checkJohannes Schneider
When CONFIG_OF_MDIO is set to be a module the code block is not compiled. Use the IS_ENABLED macro that checks for both built in as well as module. Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250423044724.1284492-1-johannes.schneider@leica-geosystems.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24drm/i915/display: Disintegrate sink alpm enable from psr with lobfAnimesh Manna
Make a generic alpm enable function for sink which can be used for PSR2/PR/Lobf. v1: Initial version. v2: Move code comment to intel_psr_needs_alpm(). [Jouni] Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-12-animesh.manna@intel.com
2025-04-24drm/i915/alpm: Add intel_psr_need_alpm() to simplify alpm checkAnimesh Manna
Simplify the alpm check which will be used multiple places like source configuration, sink enablement etc. Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-11-animesh.manna@intel.com
2025-04-24drm/i915/lobf: Check for sink error and disable LOBFAnimesh Manna
Disable LOBF/ALPM for any erroneous condition from sink side. v1: Initial version. v2: Add centralized alpm error handling. [Jouni] v3: Improve debug print. [Jouni] v4: Disable alpm permanently for sink error. [Jouni] Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-10-animesh.manna@intel.com
2025-04-24drm/i915/lobf: Add mutex for alpm updateAnimesh Manna
The ALPM_CTL can be updated from different context, so add mutex to sychonize the update. Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-9-animesh.manna@intel.com
2025-04-24drm/i915/lobf: Add debug interface for lobfAnimesh Manna
Add an interface in debugfs which will help in debugging LOBF feature. v1: Initial version. v2: - Remove FORCE_EN flag. [Jouni] - Change prefix from I915 to INTEL. [Jani] - Use u8 instead of bool for lobf-debug flag. [Jani] v3: - Use intel_connector instead of display. [Jani] - Remove edp connector check as it was already present in caller function. [Jani] - Remove loop of searching edp encoder which is directly accessible from intel_connector. [Jani] v4: - Simplify alpm debug to bool instead of bit-mask. [Jani] v5: - Remove READ_ONCE(). [Jani] - Modify variable name to *_disable_*. [Jouni] v6: Improved debug print. [Jouni] Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-8-animesh.manna@intel.com
2025-04-24drm/i915/lobf: Update lobf if any change in dependent parametersAnimesh Manna
For every commit the dependent condition for LOBF is checked and accordingly update has_lobf flag which will be used to update the ALPM_CTL register during commit. v1: Initial version. v2: Avoid reading h/w register without has_lobf check. [Jani] v3: Update LOBF in post plane update instead of separate function. [Jouni] v4: - Add lobf disable print. [Jouni] - Simplify condition check for enabling/disabling lobf. [Jouni] v5: Disable LOBF in pre_plane_update(). [Jouni] v6: use lobf flag of old_crtc_state and write 0 into ALPM_CTL. [Jouni] Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-7-animesh.manna@intel.com
2025-04-24drm/i915/lobf: Add fixed refresh rate check in compute_config()Animesh Manna
LOBF can be enabled with vrr fixed rate mode, so add check if vmin = vmax = flipline in compute_config(). Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-6-animesh.manna@intel.com
2025-04-24drm/i915/lobf: Disintegrate alpm_disable from psr_disableAnimesh Manna
Currently clearing of alpm registers is done through psr_disable() which is always not correct, without psr also alpm can exist. So dis-integrate alpm_disable() from psr_disable(). v1: Initial version. v2: - Remove h/w register read from alpm_disable(). [Jani] Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-5-animesh.manna@intel.com
2025-04-24drm/i915/lobf: Add debug print for LOBFAnimesh Manna
Lobf is enabled part of ALPM configuration and if has_lobf is set to true respective bit for LOBF will be set. Add debug print while setting the bitfield of LOBF. Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-4-animesh.manna@intel.com
generated by cgit (git 2.34.1) at 2025-07-19 14:38:19 +0000