| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More stack usage improvements: instead of creating a new alloc_request
(currently on the stack), save/restore just the fields we need to reuse.
This is a bit tricky, because we're doing a normal alloc_foreground.c
allocation, which calls into ec.c to get a stripe, which then does more
normal allocations - some of the fields get reused, and used
differently.
So we have to save and restore them - but the stack usage improvements
will be well worth it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a struct for common state for satisfying an on disk allocation,
instead of passing the same long list of items to every function.
This will help with stack usage, performance, and perhaps enable some
code cleanups.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're occasionally seeing the WARN_ON() for bump allocator usage
exceeding BTREE_TRANS_MEM_MAX; add some tracing so we can see what's
going on.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was achieved before by zero-ing out the source buffer and then
copying the bytes into the destination buffer. This can also be done with
memcpy_and_pad which will zero out only the destination buffer if its
size is bigger than the size of the source buffer. This is already used in
the same way in journal_transaction_name().
Moreover, zero-ing the source buffer was done twice, first in
__bch2_fs_log_msg() and then in bch2_trans_log_msg(). And this method
may also require allocating some extra memory for the source buffer.
In conclusion, using memcpy_and_pad is better even tough the result is
the same because it brings uniformity with what's already used in
journal_transaction_name, it avoids code duplication and reallocating
extra memory.
Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Strncpy is now deprecated.
The buffer destination is not required to be NULL-terminated, but we also
want to zero out the rest of the buffer as it is already done in other
places.
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Let's not move poisoned extents unnecessarily, since we can't guard
against introducing more bitrot.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now, if an extent is poisoned we can move it even if there was a
checksum error. We'll have to give it a new checksum, but the poison bit
means that userspace will still see the appropriate error when they try
to read it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Copygc needs to be able to move extents that have bitrotted. We don't
want to delete them - in the future we'll have an API for "read me the
data even if there's checksum errors", and in general we don't want to
delete anything unless the user asks us to.
That will require writing it with a new checksum, which means we can't
forget that there was a checksum error so we return the correct error to
userspace.
Rebalance also wants to skip bad extents; we can now use the poison flag
for that.
This is currently disabled by default, as we want read fua support so
that we can distinguish between transient and permanent errors from the
device. It may be enabled with the module parameter:
poison_extents_on_checksum_error
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the extent we're reading from changes, due to be being overwritten or
moved (possibly partially) - we need to reset bch_io_failures so that we
don't accidentally mark a new extent as poisoned prematurely.
This means we have to separately track (in the retry path) the extent we
previously read from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Check for mismatches between casefold dirents and casefold directories.
A mismatch will cause lookups to fail, as we'll be doing the lookup with
the casefolded name, which won't match the non-casefolded dirent, and
vice versa.
Reported-by: Christopher Snowhill <chris@kode54.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_dirent_create_snapshot(), used in fsck, neglected to create a
casefolded dirent.
Just move this into dirent_create_key().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Changing the casefold option requires extra checks/work - factor out a
helper from bch2_fileattr_set() for the xattr code to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Don't dirty the whole folio - fixes write amplification with
applications doing mmaped writes.
https://www.reddit.com/r/bcachefs/comments/1klzcg1/incredible_amounts_of_write_amplification_when/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This wasn't checking indirect extents.
Fixes: https://github.com/koverstreet/bcachefs/issues/887
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_key_cache_fill() will allocate and traverse another path (for the
underlying btree), so we can't hold pointers to paths across a call - we
have to pass indices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
fsck_err() needs the btree transaction passed to it if there is one - so
that it can unlock/relock around prompting userspace for fixing the
error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fsck wants to do transaction commits from an outer context; it may have
other repair to do (i.e. duplicate backpointers).
But when calling backpointer_not_found() from runtime code, i.e. runtime
self healing, we should be doing the commit - the outer context expects
to just be doing lookups.
This fixes bugs where we get stuck spinning, reported as "RCU lock hold
time warnings.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since bch2_seek_pagecache_data() searches for dirty data, we only want
to call it for holes in the extents btree - otherwise we have an
accidental O(n^2), as we repeatedly search the same range.
Reported-by: Marcin Mirosław <marcin@mejor.pl>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
set_should_be_locked() needs to be called before peek_key_cache(), which
traverses other paths and may do a trans unlock/relock.
This fixes an assertion pop in path_peek_slot(), when the path we're
using is unexpectedly not uptodate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Before invoking bch2_accounting_mem_mod_locked in
bch2_gc_accounting_done, we already write locked mark_lock,
in bch2_accounting_mem_insert, we lock mark_lock again.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prevent jobs that do lots of scanning (i.e. evacuatee, scrub) from
causing OOMs.
The shrinker code seems to be having issues when it doesn't do any
freeing because it's just flipping off the acccessed bit - and the
accessed bit shouldn't be set on first use anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When the journal is low on space, we might do discards from
journal_res_get() -> journal_entry_open().
Make sure we set j->can_discard correctly, so that if we're low on space
but not because discards aren't keeping up we don't livelock.
Fixes: 8e4d28036c29 ("bcachefs: Don't aggressively discard the journal")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes btree locking assert pops users were seeing during evacuate:
https://github.com/koverstreet/bcachefs/issues/878
May 09 22:45:02 sharon kernel: bcachefs (68116e25-fa2d-4c6f-86c7-e8b431d792ae): bch2_btree_insert_node(): node not locked at level 1
May 09 22:45:02 sharon kernel: bch2_btree_node_rewrite [bcachefs]: watermark=btree no_check_rw alloc l=0-1 mode=none nodes_written=0 cl.remaining=2 journal_seq=0
May 09 22:45:02 sharon kernel: path: idx 1 ref 1:0 S B btree=alloc level=0 pos 0:3699637:0 0:3698012:1-0:3699637:0 bch2_move_btree.isra.0+0x1db/0x490 [bcachefs] uptodate 0 locks_want 2
May 09 22:45:02 sharon kernel: l=0 locks intent seq 4 node ffff8bd700c93600
May 09 22:45:02 sharon kernel: l=1 locks unlocked seq 1712 node ffff8bd6fd5e7a00
May 09 22:45:02 sharon kernel: l=2 locks unlocked seq 2295 node ffff8bd6cc725400
May 09 22:45:02 sharon kernel: l=3 locks unlocked seq 0 node 0000000000000000
Evacuate walks btree nodes with bch2_btree_iter_next_node() and rewrites
them, bch2_btree_update_start() upgrades the path to take intent locks
as far as it needs to.
But next_node() does low level unlock/relock calls on individual nodes,
and didn't handle the case where a path is supposed to be holding
multiple intent locks. If a path has locks_want > 1, it needs to be
either holding locks on all the btree nodes (at each level) requested,
or none of them.
Fix this with a bch2_btree_path_downgrade().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix bch2_bkey_clear_needs_rebalance(): indirect extents are never
supposed to have bch_extent_rebalance stripped off, because that's how
we get the IO path options when we don't have the original inode it
belonged to.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now that the ChaCha state matrix is strongly-typed, add a helper
function chacha_zeroize_state() which zeroizes it. Then convert all
applicable callers to use it instead of direct memzero_explicit. No
functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ChaCha state matrix is 16 32-bit words. Currently it is represented
in the code as a raw u32 array, or even just a pointer to u32. This
weak typing is error-prone. Instead, introduce struct chacha_state:
struct chacha_state {
u32 x[16];
};
Convert all ChaCha and HChaCha functions to use struct chacha_state.
No functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Deduplicate the same functionality implemented in several places by
moving the cmp_int() helper macro into linux/sort.h.
The macro performs a three-way comparison of the arguments mostly useful
in different sorting strategies and algorithms.
Link: https://lkml.kernel.org/r/20250427201451.900730-1-pchelkin@ispras.ru
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: Coly Li <colyli@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Coly Li <colyli@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-10-mingo@kernel.org
|
|
We frequently use 'bcachefs list_journal -a' for debugging, as it
provides a record of all btree transactions, and a history of what
happened.
But it's not so useful if we immediately discard journal buckets right
after they're no longer dirty.
This tweaks journal reclaim to only discard when we're low on space,
keeping the journal mostly un-discarded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we go emergency read-only, make sure we do a final write_super() to
persist counters and error counts - this can be critical for piecing
together what fsck was doing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
These just indicate that we're shutting down.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We often filter out EROFS errors to avoid log spew after an emergency
shutdown - journal_shutdown is just another emergency shutdown error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This reverts
1fdbe0b184c8 bcachefs: Make sure c->vfs_sb is set before starting fs
switched up bch2_fs_get_tree() so that we got a superblock before
calling bch2_fs_start, so that c->vfs_sb would always be initialized
while the filesystem was active.
This turned out not to be necessary, because blk_holder_ops were
implemented using our own locking, not vfs locking.
And this had the side effect of creating a super_block and doing our
full recovery (including potentially fsck) before setting SB_BORN, which
causes things like sync calls to hang until our recovery is finished.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
wake_up() doesn't require a barrier - but wake_up_bit() does.
This only affected non x86, and primarily lead to lost wakeups after
btree node reads.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There was a buggy version of bcachefs-tools which picked misaligned
bucket sizes when formatting, and we're also about to do dynamic block
sizes - which will allow picking logical block size or physical block
size of the device per-write, allowing for better compression ratios at
the cost of slightly worse write performance (i.e. forcing the device to
do RMW or extra buffering).
To account for this, tweak bch2_alloc_sectors_start() to properly align
open_buckets to the blocksize of the write we're about to do.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If promote target isn't set, rebalance should still leave a cached copy
on the faster device.
Fall back to foreground_target if it's set, or allow a cached copy on
any device if neither are set.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_stdio_redirect_vprintf() was missing a check for stdio->done, i.e.
exiting.
This caused the thread attempting to print to spin, and since it was
being called from the kthread ran by thread_with_stdio, the userspace
side hung as well.
Change it to return -EPIPE - i.e. writing to a pipe that's been closed.
Reported-by: Jan Solanti <jhs@psonet.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr
with __counted_by()").
After the x_name, there is a value. According to the disscussion[1],
__counted_by assumes that the flexible array member contains exactly
the amount of elements that are specified. Now there are users came across
a false positive detection of an out of bounds write caused by
the __counted_by here[2], so revert that.
[1] https://lore.kernel.org/lkml/Zv8VDKWN1GzLRT-_@archlinux/T/#m0ce9541c5070146320efd4f928cc1ff8de69e9b2
[2] https://privatebin.net/?a0d4e97d590d71e1#9bLmp2Kb5NU6X6cZEucchDcu88HzUQwHUah8okKPReEt
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
00594 ------------[ cut here ]------------
00594 do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000003e51ef4a>] prepare_to_wait_event+0x5c/0x1c0
00594 WARNING: CPU: 12 PID: 1117 at kernel/sched/core.c:8741 __might_sleep+0x74/0x88
00594 Modules linked in:
00594 CPU: 12 UID: 0 PID: 1117 Comm: umount Not tainted 6.15.0-rc4-ktest-g3a72e369412d #21845 PREEMPT
00594 Hardware name: linux,dummy-virt (DT)
00594 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00594 pc : __might_sleep+0x74/0x88
00594 lr : __might_sleep+0x74/0x88
00594 sp : ffffff80c8d67a90
00594 x29: ffffff80c8d67a90 x28: ffffff80f5903500 x27: 0000000000000000
00594 x26: 0000000000000000 x25: ffffff80cf5002a0 x24: ffffffc087dad000
00594 x23: ffffff80c8d67b40 x22: 0000000000000000 x21: 0000000000000000
00594 x20: 0000000000000242 x19: ffffffc080b92020 x18: 00000000ffffffff
00594 x17: 30303c5b20746120 x16: 74657320323d6574 x15: 617473203b474e49
00594 x14: 0000000000000001 x13: 00000000000c0000 x12: ffffff80facc0000
00594 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0800b0774
00594 x8 : c0000000fffbffff x7 : ffffffc087dac670 x6 : 00000000015fffa8
00594 x5 : ffffff80facbffa8 x4 : ffffff80fbd30b90 x3 : 0000000000000000
00594 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff80f5903500
00594 Call trace:
00594 __might_sleep+0x74/0x88 (P)
00594 __mutex_lock+0x64/0x8d8
00594 mutex_lock_nested+0x28/0x38
00594 bch2_fs_ec_flush+0xf8/0x128
00594 __bch2_fs_read_only+0x54/0x1d8
00594 bch2_fs_read_only+0x3e0/0x438
00594 __bch2_fs_stop+0x5c/0x250
00594 bch2_put_super+0x18/0x28
00594 generic_shutdown_super+0x6c/0x140
00594 bch2_kill_sb+0x1c/0x38
00594 deactivate_locked_super+0x54/0xd0
00594 deactivate_super+0x70/0x90
00594 cleanup_mnt+0xec/0x188
00594 __cleanup_mnt+0x18/0x28
00594 task_work_run+0x90/0xd8
00594 do_notify_resume+0x138/0x148
00594 el0_svc+0x9c/0xa0
00594 el0t_64_sync_handler+0x104/0x130
00594 el0t_64_sync+0x154/0x158
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
