| Age | Commit message (Collapse) | Author |
|---|
|
SMB2_GLOBAL_CAP_ENCRYPTION flag should be used only for 3.0 and
3.0.2 dialects. This flags set cause compatibility problems with
other SMB clients.
Reported-by: James Christopher Adduono <jc@adduono.com>
Tested-by: James Christopher Adduono <jc@adduono.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If installing malicious ksmbd-tools, ksmbd.mountd can return invalid ipc
response to ksmbd kernel server. ksmbd should validate payload size of
ipc response from ksmbd.mountd to avoid memory overrun or
slab-out-of-bounds. This patch validate 3 ipc response that has payload.
Cc: stable@vger.kernel.org
Reported-by: Chao Ma <machao2019@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Don't send oplock break if rename fails. This patch fix
smb2.oplock.batch20 test.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The UAF bug is due to smb2_reconnect_server() accessing a session that
is already being teared down by another thread that is executing
__cifs_put_smb_ses(). This can happen when (a) the client has
connection to the server but no session or (b) another thread ends up
setting @ses->ses_status again to something different than
SES_EXITING.
To fix this, we need to make sure to unconditionally set
@ses->ses_status to SES_EXITING and prevent any other threads from
setting a new status while we're still tearing it down.
The following can be reproduced by adding some delay to right after
the ipc is freed in __cifs_put_smb_ses() - which will give
smb2_reconnect_server() worker a chance to run and then accessing
@ses->ipc:
kinit ...
mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10
[disconnect srv]
ls /mnt/1 &>/dev/null
sleep 30
kdestroy
[reconnect srv]
sleep 10
umount /mnt/1
...
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39
04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0
Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad
de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75
7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8
RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83
RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b
RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800
RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000
R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000
FS: 0000000000000000(0000) GS:ffff888157c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c1/0x3f0
? asm_exc_general_protection+0x26/0x30
? __list_del_entry_valid_or_report+0x33/0xf0
__cifs_put_smb_ses+0x1ae/0x500 [cifs]
smb2_reconnect_server+0x4ed/0x710 [cifs]
process_one_work+0x205/0x6b0
worker_thread+0x191/0x360
? __pfx_worker_thread+0x10/0x10
kthread+0xe2/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
In cifssmb.c:
Using strncpy with a length argument equal to strlen(src) is generally
dangerous because it can cause string buffers to not be NUL-terminated.
In this case, however, there was extra effort made to ensure the buffer
was NUL-terminated via a manual NUL-byte assignment. In an effort to rid
the kernel of strncpy() use, let's swap over to using strscpy() which
guarantees NUL-termination on the destination buffer.
To handle the case where ea_name is NULL, let's use the ?: operator to
substitute in an empty string, thereby allowing strscpy to still
NUL-terminate the destintation string.
Interesting note: this flex array buffer may go on to also have some
value encoded after the NUL-termination:
| if (ea_value_len)
| memcpy(parm_data->list.name + name_len + 1,
| ea_value, ea_value_len);
Now for smb2ops.c and smb2transport.c:
Both of these cases are simple, strncpy() is used to copy string
literals which have a length less than the destination buffer's size. We
can simply swap in the new 2-argument version of strscpy() introduced in
Commit e6584c3964f2f ("string: Allow 2-argument strscpy()").
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
fscache emits a lot of duplicate cookie warnings with cifs because the
index key for the fscache cookies does not include everything that the
cifs_find_inode() function does. The latter is used with iget5_locked() to
distinguish between inodes in the local inode cache.
Fix this by adding the creation time and file type to the fscache cookie
key.
Additionally, add a couple of comments to note that if one is changed the
other must be also.
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: 70431bfd825d ("cifs: Support fscache indexing rewrite")
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add trace points to help debug mknod and mkfifo:
smb3_mknod_done
smb3_mknod_enter
smb3_mknod_err
Example output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
mkfifo-6163 [003] ..... 960.425558: smb3_mknod_enter: xid=12 sid=0xb55130f6 tid=0x46e6241c path=\fifo1
mkfifo-6163 [003] ..... 960.432719: smb3_mknod_done: xid=12 sid=0xb55130f6 tid=0x46e6241c
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Various get_inode_info_fixes
- Fix for querying xattrs of cached dirs
- Four minor cleanup fixes (including adding some header corrections
and a missing flag)
- Performance improvement for deferred close
- Two query interface fixes
* tag '6.9-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb311: additional compression flag defined in updated protocol spec
smb311: correct incorrect offset field in compression header
cifs: Move some extern decls from .c files to .h
cifs: remove redundant variable assignment
cifs: fixes for get_inode_info
cifs: open_cached_dir(): add FILE_READ_EA to desired access
cifs: reduce warning log level for server not advertising interfaces
cifs: make sure server interfaces are requested only for SMB3+
cifs: defer close file handles having RH lease
|
|
Pull smb server updates from Steve French:
- add support for durable file handles (an important data integrity
feature)
- fixes for potential out of bounds issues
- fix possible null dereference in close
- getattr fixes
- trivial typo fix and minor cleanup
* tag 'v6.9-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: remove module version
ksmbd: fix potencial out-of-bounds when buffer offset is invalid
ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()
ksmbd: Fix spelling mistake "connction" -> "connection"
ksmbd: fix possible null-deref in smb_lazy_parent_lease_break_close
ksmbd: add support for durable handles v1/v2
ksmbd: mark SMB2_SESSION_EXPIRED to session when destroying previous session
ksmbd: retrieve number of blocks using vfs_getattr in set_file_allocation_info
ksmbd: replace generic_fillattr with vfs_getattr
|
|
Added new compression flag that was recently documented, in
addition fix some typos and clarify the sid_attr_data struct
definition.
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The offset field in the compression header is 32 bits not 16.
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reported-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move the following:
extern mempool_t *cifs_sm_req_poolp;
extern mempool_t *cifs_req_poolp;
extern mempool_t *cifs_mid_poolp;
extern bool disable_legacy_dialects;
from various .c files to cifsglob.h.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd module version marking is not needed. Since there is a
Linux kernel version, there is no point in increasing it anymore.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
I found potencial out-of-bounds when buffer offset fields of a few requests
is invalid. This patch set the minimum value of buffer offset field to
->Buffer offset to validate buffer length.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If ->NameOffset of smb2_create_req is smaller than Buffer offset of
smb2_create_req, slab-out-of-bounds read can happen from smb2_open.
This patch set the minimum value of the name offset to the buffer offset
to validate name length of smb2_create_req().
Cc: stable@vger.kernel.org
Reported-by: Xuanzhe Yu <yuxuanzhe@outlook.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is a spelling mistake in a ksmbd_debug debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
rcu_dereference can return NULL, so make sure we check against that.
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This removes an unnecessary variable assignment. The assigned
value will be overwritten by cifs_fattr_to_inode before it
is accessed, making the line redundant.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix potential memory leaks, add error checking, remove unnecessary
initialisation of status_file_deleted and do not use cifs_iget() to get
inode in reparse_info_to_fattr since fattrs may not be fully set.
Fixes: ffceb7640cbf ("smb: client: do not defer close open handles to deleted files")
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since smb2_query_eas() reads EA and uses cached directory,
open_cached_dir() should request FILE_READ_EA access.
Otherwise listxattr() and getxattr() will fail with EACCES
(0xc0000022 STATUS_ACCESS_DENIED SMB status).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218543
Cc: stable@vger.kernel.org
Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Several users have reported this log getting dumped too regularly to
kernel log. The likely root cause has been identified, and it suggests
that this situation is expected for some configurations
(for example SMB2.1).
Since the function returns appropriately even for such cases, it is
fairly harmless to make this a debug log. When needed, the verbosity
can be increased to capture this log.
Cc: stable@vger.kernel.org
Reported-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some code paths for querying server interfaces make a false
assumption that it will only get called for SMB3+. Since this
function now can get called from a generic code paths, the correct
thing to do is to have specific handler for this functionality
per SMB dialect, and call this handler.
This change adds such a handler and implements this handler only
for SMB 3.0 and 3.1.1.
Cc: stable@vger.kernel.org
Cc: Jan Čermák <sairon@sairon.cz>
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Previously we only deferred closing file handles with RHW
lease. To enhance performance benefits from deferred closes,
we now include handles with RH leases as well.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- fix for folios/netfs data corruption in cifs_extend_writeback
- additional tracepoint added
- updates for special files and symlinks: improvements to allow
selecting use of either WSL or NFS reparse point format on creating
special files
- allocation size improvement for cached files
- minor cleanup patches
- fix to allow changing the password on remount when password for the
session is expired.
- lease key related fixes: caching hardlinked files, deletes of
deferred close files, and an important fix to better reuse lease keys
for compound operations, which also can avoid lease break timeouts
when low on credits
- fix potential data corruption with write/readdir races
- compression cleanups and a fix for compression headers
* tag '6.9-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
cifs: update internal module version number for cifs.ko
smb: common: simplify compression headers
smb: common: fix fields sizes in compression_pattern_payload_v1
smb: client: negotiate compression algorithms
smb3: add dynamic trace point for ioctls
cifs: Fix writeback data corruption
smb: client: return reparse type in /proc/mounts
smb: client: set correct d_type for reparse DFS/DFSR and mount point
smb: client: parse uid, gid, mode and dev from WSL reparse points
smb: client: introduce SMB2_OP_QUERY_WSL_EA
smb: client: Fix a NULL vs IS_ERR() check in wsl_set_xattrs()
smb: client: add support for WSL reparse points
smb: client: reduce number of parameters in smb2_compound_op()
smb: client: fix potential broken compound request
smb: client: move most of reparse point handling code to common file
smb: client: introduce reparse mount option
smb: client: retry compound request without reusing lease
smb: client: do not defer close open handles to deleted files
smb: client: reuse file lease key in compound operations
smb3: update allocation size more accurately on write completion
...
|
|
Yes, yes, I know the slab people were planning on going slow and letting
every subsystem fight this thing on their own. But let's just rip off
the band-aid and get it over and done with. I don't want to see a
number of unnecessary pull requests just to get rid of a flag that no
longer has any meaning.
This was mainly done with a couple of 'sed' scripts and then some manual
cleanup of the end result.
Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Durable file handles allow reopening a file preserved on a short
network outage and transparent client reconnection within a timeout.
i.e. Durable handles aren't necessarily cleaned up when the opening
process terminates.
This patch add support for durable handle version 1 and 2.
To prove durable handles work on ksmbd, I have tested this patch with
the following smbtorture tests:
smb2.durable-open.open-oplock
smb2.durable-open.open-lease
smb2.durable-open.reopen1
smb2.durable-open.reopen1a
smb2.durable-open.reopen1a-lease
smb2.durable-open.reopen2
smb2.durable-open.reopen2a
smb2.durable-open.reopen2-lease
smb2.durable-open.reopen2-lease-v2
smb2.durable-open.reopen3
smb2.durable-open.reopen4
smb2.durable-open.delete_on_close2
smb2.durable-open.file-position
smb2.durable-open.lease
smb2.durable-open.alloc-size
smb2.durable-open.read-only
smb2.durable-v2-open.create-blob
smb2.durable-v2-open.open-oplock
smb2.durable-v2-open.open-lease
smb2.durable-v2-open.reopen1
smb2.durable-v2-open.reopen1a
smb2.durable-v2-open.reopen1a-lease
smb2.durable-v2-open.reopen2
smb2.durable-v2-open.reopen2b
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently ksmbd exit connection as well destroying previous session.
When testing durable handle feaure, I found that
destroy_previous_session() should destroy only session, i.e. the
connection should be still alive. This patch mark SMB2_SESSION_EXPIRED
on the previous session to be destroyed later and not used anymore.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use vfs_getattr() to retrieve stat information, rather than make
assumptions about how a filesystem fills inode structs.
Cc: stable@vger.kernel.org
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
generic_fillattr should not be used outside of ->getattr
implementations.
Use vfs_getattr instead, and adapt functions to return an
error code to the caller.
Cc: stable@vger.kernel.org
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull file locking updates from Christian Brauner:
"A few years ago struct file_lock_context was added to allow for
separate lists to track different types of file locks instead of using
a singly-linked list for all of them.
Now leases no longer need to be tracked using struct file_lock.
However, a lot of the infrastructure is identical for leases and locks
so separating them isn't trivial.
This splits a group of fields used by both file locks and leases into
a new struct file_lock_core. The new core struct is embedded in struct
file_lock. Coccinelle was used to convert a lot of the callers to deal
with the move, with the remaining 25% or so converted by hand.
Afterwards several internal functions in fs/locks.c are made to work
with struct file_lock_core. Ultimately this allows to split struct
file_lock into struct file_lock and struct file_lease. The file lease
APIs are then converted to take struct file_lease"
* tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (51 commits)
filelock: fix deadlock detection in POSIX locking
filelock: always define for_each_file_lock()
smb: remove redundant check
filelock: don't do security checks on nfsd setlease calls
filelock: split leases out of struct file_lock
filelock: remove temporary compatibility macros
smb/server: adapt to breakup of struct file_lock
smb/client: adapt to breakup of struct file_lock
ocfs2: adapt to breakup of struct file_lock
nfsd: adapt to breakup of struct file_lock
nfs: adapt to breakup of struct file_lock
lockd: adapt to breakup of struct file_lock
fuse: adapt to breakup of struct file_lock
gfs2: adapt to breakup of struct file_lock
dlm: adapt to breakup of struct file_lock
ceph: adapt to breakup of struct file_lock
afs: adapt to breakup of struct file_lock
9p: adapt to breakup of struct file_lock
filelock: convert seqfile handling to use file_lock_core
filelock: convert locks_translate_pid to take file_lock_core
...
|
|
From 2.47 to 2.48
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Unify compression headers (chained and unchained) into a single struct
so we can use it for the initial compression transform header
interchangeably.
Also make the OriginalPayloadSize field to be always visible in the
compression payload header, and have callers subtract its size when not
needed.
Rename the related structs to match the naming convetion used in the
other SMB2 structs.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See protocol documentation in MS-SMB2 section 2.2.42.2.2
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change "compress=" mount option to a boolean flag, that, if set,
will enable negotiating compression algorithms with the server.
Do not de/compress anything for now.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It can be helpful in debugging to know which ioctls are called to better
correlate them with smb3 fsctls (and opens). Add a dynamic trace point
to trace ioctls into cifs.ko
Here is sample output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
new-inotify-ioc-90418 [001] ..... 142157.397024: smb3_ioctl: xid=18 fid=0x0 ioctl cmd=0xc009cf0b
new-inotify-ioc-90457 [007] ..... 142217.943569: smb3_ioctl: xid=22 fid=0x389bf5b6 ioctl cmd=0xc009cf0b
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs writeback doesn't correctly handle the case where
cifs_extend_writeback() hits a point where it is considering an additional
folio, but this would overrun the wsize - at which point it drops out of
the xarray scanning loop and calls xas_pause(). The problem is that
xas_pause() advances the loop counter - thereby skipping that page.
What needs to happen is for xas_reset() to be called any time we decide we
don't want to process the page we're looking at, but rather send the
request we are building and start a new one.
Fix this by copying and adapting the netfslib writepages code as a
temporary measure, with cifs writeback intending to be offloaded to
netfslib in the near future.
This also fixes the issue with the use of filemap_get_folios_tag() causing
retry of a bunch of pages which the extender already dealt with.
This can be tested by creating, say, a 64K file somewhere not on cifs
(otherwise copy-offload may get underfoot), mounting a cifs share with a
wsize of 64000, copying the file to it and then comparing the original file
and the copy:
dd if=/dev/urandom of=/tmp/64K bs=64k count=1
mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000
cp /tmp/64K /mnt/64K
cmp /tmp/64K /mnt/64K
Without the fix, the cmp fails at position 64000 (or shortly thereafter).
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add support for returning reparse mount option in /proc/mounts.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402262152.YZOwDlCM-lkp@intel.com/
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Set correct dirent->d_type for IO_REPARSE_TAG_DFS{,R} and
IO_REPARSE_TAG_MOUNT_POINT reparse points.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Parse the extended attributes from WSL reparse points to correctly
report uid, gid mode and dev from ther instantiated inodes.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add a new command to smb2_compound_op() for querying WSL extended
attributes from reparse points.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This was intended to be an IS_ERR() check. The ea_create_context()
function doesn't return NULL.
Fixes: 1eab17fe485c ("smb: client: add support for WSL reparse points")
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add support for creating special files via WSL reparse points when
using 'reparse=wsl' mount option. They're faster than NFS reparse
points because they don't require extra roundtrips to figure out what
->d_type a specific dirent is as such information is already stored in
query dir responses and then making getdents() calls faster.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace @desired_access, @create_disposition, @create_options and
@mode parameters with a single @oparms.
No functional changes.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Now that smb2_compound_op() can accept up to 5 commands in a single
compound request, set the appropriate NextCommand and related flags to
all subsequent commands as well as handling the case where a valid
@cfile is passed and therefore skipping create and close requests in
the compound chain.
This fix a potential broken compound request that could be sent from
smb2_get_reparse_inode() if the client found a valid open
file (@cfile) prior to calling smb2_compound_op().
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In preparation to add support for creating special files also via WSL
reparse points in next commits.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Allow the user to create special files and symlinks by choosing
between WSL and NFS reparse points via 'reparse={nfs,wsl}' mount
options. If unset or 'reparse=default', the client will default to
creating them via NFS reparse points.
Creating WSL reparse points isn't supported yet, so simply return
error when attempting to mount with 'reparse=wsl' for now.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is a shortcoming in the current implementation of the file
lease mechanism exposed when the lease keys were attempted to be
reused for unlink, rename and set_path_size operations for a client. As
per MS-SMB2, lease keys are associated with the file name. Linux smb
client maintains lease keys with the inode. If the file has any hardlinks,
it is possible that the lease for a file be wrongly reused for an
operation on the hardlink or vice versa. In these cases, the mentioned
compound operations fail with STATUS_INVALID_PARAMETER.
This patch adds a fallback to the old mechanism of not sending any
lease with these compound operations if the request with lease key fails
with STATUS_INVALID_PARAMETER.
Resending the same request without lease key should not hurt any
functionality, but might impact performance especially in cases where
the error is not because of the usage of wrong lease key and we might
end up doing an extra roundtrip.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a file/dentry has been deleted before closing all its open
handles, currently, closing them can add them to the deferred
close list. This can lead to problems in creating file with the
same name when the file is re-created before the deferred close
completes. This issue was seen while reusing a client's already
existing lease on a file for compound operations and xfstest 591
failed because of the deferred close handle that remained valid
even after the file was deleted and was being reused to create a
file with the same name. The server in this case returns an error
on open with STATUS_DELETE_PENDING. Recreating the file would
fail till the deferred handles are closed (duration specified in
closetimeo).
This patch fixes the issue by flagging all open handles for the
deleted file (file path to be precise) by setting
status_file_deleted to true in the cifsFileInfo structure. As per
the information classes specified in MS-FSCC, SMB2 query info
response from the server has a DeletePending field, set to true
to indicate that deletion has been requested on that file. If
this is the case, flag the open handles for this file too.
When doing close in cifs_close for each of these handles, check the
value of this boolean field and do not defer close these handles
if the corresponding filepath has been deleted.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, when a rename, unlink or set path size compound operation
is requested on a file that has a lot of dirty pages to be written
to the server, we do not send the lease key for these requests. As a
result, the server can assume that this request is from a new client, and
send a lease break notification to the same client, on the same
connection. As a response to the lease break, the client can consume
several credits to write the dirty pages to the server. Depending on the
server's credit grant implementation, the server can stop granting more
credits to this connection, and this can cause a deadlock (which can only
be resolved when the lease timer on the server expires).
One of the problems here is that the client is sending no lease key,
even if it has a lease for the file. This patch fixes the problem by
reusing the existing lease key on the file for rename, unlink and set path
size compound operations so that the client does not break its own lease.
A very trivial example could be a set of commands by a client that
maintains open handle (for write) to a file and then tries to copy the
contents of that file to another one, eg.,
tail -f /dev/null > myfile &
mv myfile myfile2
Presently, the network capture on the client shows that the move (or
rename) would trigger a lease break on the same client, for the same file.
With the lease key reused, the lease break request-response overhead is
eliminated, thereby reducing the roundtrips performed for this set of
operations.
The patch fixes the bug described above and also provides perf benefit.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Changes to allocation size are approximated for extending writes of cached
files until the server returns the actual value (on SMB3 close or query info
for example), but it was setting the estimated value for number of blocks
to larger than the file size even if the file is likely sparse which
breaks various xfstests (e.g. generic/129, 130, 221, 228).
When i_size and i_blocks are updated in write completion do not increase
allocation size more than what was written (rounded up to 512 bytes).
Signed-off-by: Steve French <stfrench@microsoft.com>
|
