summaryrefslogtreecommitdiff
path: root/include/drm
AgeCommit message (Collapse)Author
2024-05-15drm/i915/pciids: don't include WHL/CML PCI IDs in CFLJani Nikula
It's confusing for INTEL_CFL_IDS() to include all WHL and CML PCI IDs. Even if we treat them the same in a lot of places, CML is a platform of its own, and the lists of PCI IDs should not conflate them. Largely go by the idea that if a platform has a name, group its PCI IDs together. That said, AML is special, having both KBL and CFL variants. Leave that alone. v2: Also split out WHL not just CML (Rodrigo) Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/7cca91dc78ed2b5982f14e400f03a1704645e475.1715340032.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-15drm/i915/pciids: add INTEL_IVB_IDS()Jani Nikula
Add INTEL_IVB_IDS() to identify all IVBs except IVB Q transcode. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/ed89a25b2c6bce318fe59e883d18b62d9453196b.1715340032.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-15drm/i915/pciids: add INTEL_SNB_IDS()Jani Nikula
Add INTEL_SNB_IDS() to identify all SNBs. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/ffcb2d954ad9bca78ccd39836dc0a3dc7c6c0253.1715340032.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-15drm/i915/pciids: add INTEL_ILK_IDS(), use acronymJani Nikula
Most other PCI ID macros use platform acronyms. Follow suit for ILK. Add INTEL_ILK_IDS() to identify all ILKs. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/27ada56363cfa6a5b093cb31908a4b89aa912621.1715340032.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-15drm/i915/pciids: add INTEL_PNV_IDS(), use acronymJani Nikula
Most other PCI ID macros use platform acronyms. Follow suit for PNV. Add INTEL_PNV_IDS() to identify all PNVs. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/5f9b34a2cd388244be03263a5147776bfe64d5ac.1715340032.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-15drm/panelreplay: dpcd register definition for panelreplay SUJouni Högander
Add definitions for panel replay selective update v2: Remove unnecessary Cc from commit message Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-6-jouni.hogander@intel.com
2024-05-14drm/edid: remove drm_do_get_edid()Jani Nikula
All users of drm_do_get_edid() have been converted to drm_edid_read_custom(). Remove the unused function to prevent new users from creeping in. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240513202723.261440-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-11drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stubDmitry Baryshkov
If CONFIG_DRM_AUX_HPD_BRIDGE is not enabled, the aux-bridge.h header provides a stub for the bridge's functions. Correct the arguments list of one of those stubs to match the argument list of the non-stubbed function. Fixes: e5ca263508f7 ("drm/bridge: aux-hpd: separate allocation and registration") Reported-by: kernel test robot <lkp@intel.com> Cc: stable <stable@kernel.org> Closes: https://lore.kernel.org/oe-kbuild-all/202405110428.TMCfb1Ut-lkp@intel.com/ Cc: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240511-fix-aux-hpd-stubs-v1-1-98dae71dfaec@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-08drm: deprecate driver dateJani Nikula
The driver date serves no useful purpose, because it's hardly ever updated. The information is misleading at best. As described in Documentation/gpu/drm-internals.rst: The driver date, formatted as YYYYMMDD, is meant to identify the date of the latest modification to the driver. However, as most drivers fail to update it, its value is mostly useless. The DRM core prints it to the kernel log at initialization time and passes it to userspace through the DRM_IOCTL_VERSION ioctl. Stop printing the driver date at init, and start returning the empty string "" as driver date through the DRM_IOCTL_VERSION ioctl. The driver date initialization in drivers and the struct drm_driver date member can be removed in follow-up. Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Simon Ser <contact@emersion.fr> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240429164336.1406480-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-02drm/fbdev: Clean up fbdev documentationThomas Zimmermann
Rewrite some docs that are not up-to-date any longer. Remove the TODO item for fbdev-generic conversion, as the helper has been replaced. Make documentation for DMA, SHMEM and TTM emulation available. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-44-tzimmermann@suse.de
2024-05-02drm/fbdev-generic: Convert to fbdev-ttmThomas Zimmermann
Only TTM-based drivers use fbdev-generic. Rename it to fbdev-ttm and change the symbol infix from _generic_ to _ttm_. Link the source file into TTM helpers, so that it is only build if TTM-based drivers have been selected. Select DRM_TTM_HELPER for loongson. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-43-tzimmermann@suse.de
2024-05-02drm/fbdev: Add fbdev-shmemThomas Zimmermann
Add an fbdev emulation for SHMEM-based memory managers. The code is similar to fbdev-generic, but does not require an additional shadow buffer for mmap(). Fbdev-shmem operates directly on the buffer object's SHMEM pages. Fbdev's deferred-I/O mechanism updates the hardware state on write operations. The memory pages of GEM SHMEM cannot be detected by fbdefio. Therefore fbdev-shmem implements the .get_page() hook in struct fb_deferred_io. The fbdefio helpers call this hook to retrieve the page directly from fbdev-shmem instead of trying to detect it internally. v3: - clarify on get_page mechanism in commit description (Javier) v2: - use drm_driver_legacy_fb_format() (Geert) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-9-tzimmermann@suse.de
2024-04-26Merge tag 'drm-misc-next-2024-04-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.10-rc1: UAPI Changes: Cross-subsystem Changes: - Devicetree updates for rockchip (#sound-dai-cells) - Add dt bindings for new panels. - Change bridge/tc358775 dt bindings. Core Changes: - Fix SIZE_HINTS cursor property doc. - Parse topology blocks for all DispID < 2.0. - Implement support for tracking cleared free memory, use it in amdgpu. - Drop seq_file.h from drm_print.h, and include debugfs.h explicitly where needed (drivers). Driver Changes: - Small fixes to rockchip, panthor, v3d, bridge chaining, xlx. - Add Khadas TS050 V2, EDO RM69380 OLED, CSOT MNB601LS1-1 panels, - Add SAM9X7 SoC's LVDS controller. - More driver conversions to struct drm_edid. - Support tc358765 in tc358775 bridge. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1ab99848-8fb8-41a6-8967-c4ce6f3634fd@linux.intel.com
2024-04-26Merge tag 'drm-intel-next-2024-04-24' of ↵Dave Airlie
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next Core Changes: - Some DP/DP_MST DRM helpers (Imre) Driver Changes (i915 Display): - PLL refactoring (Ville) - Limit eDP MSO pipe only for display version 20 (Luca) - More display refactor towards independence from i915 dev_priv (Jani) - QGV/SAGV related refactor (Stanislav) - Few MTL/DSC and a UHBR monitor fix (Imre) - BXT/GLK per-lane vswing and PHY reg cleanup (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zik0LKEtN1PwXXGb@intel.com
2024-04-25drm/print: drop include seq_file.hJani Nikula
Never include where a forward declaration will suffice. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-2-jani.nikula@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-2-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/print: drop include debugfs.h and include where neededJani Nikula
Surprisingly many places depend on debugfs.h to be included via drm_print.h. Fix them. v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe v2: Also fix ivpu and vmwgfx Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-24Merge tag 'drm-xe-next-2024-04-23' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Remove unused flags (Francois Dugast) - Extend uAPI to query HuC micro-controler firmware version (Francois Dugast) - drm/xe/uapi: Define topology types as indexes rather than masks (Francois Dugast) - drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE (Francois Dugast) - devcoredump updates. Some touching the output format. (José Roberto de Souza, Matthew Brost) - drm/xe/hwmon: Add infra to support card power and energy attributes - Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst) - drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper) - Invalidate userptr VMA on page pin fault (Matthew Brost) - Improve xe_bo_move tracepoint (Priyanka Danamudi) - Align fence output format in ftrace log Cross-driver Changes: - drm/i915/hwmon: Get rid of devm (Ashutosh Dixit) (Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>) - drm/i915/display: convert inner wakeref get towards get_if_in_use (SOB Rodrigo Vivi) - drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref (Committer, SOB Jani Nikula) Driver Changes: - Fix for unneeded CCS metadata allocation (Akshata Jahagirdar) - Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda) - A couple of build fixes (Arnd Bergmann) - Fix register definition (Ashutosh Dixit) - Add BMG mocs table (Balasubramani Vivekanandan) - Replace sprintf() across driver (Bommu Krishnaiah) - Add an xe2 workaround (Bommu Krishnaiah) - Makefile fix (Dafna Hirschfeld) - force_wake_get error value check (Daniele Ceraolo Spurio) - Handle GSCCS ER interrupt (Daniele Ceraolo Spurio) - GSC Workaround (Daniele Ceraolo Spurio) - Build error fix (Dawei Li) - drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast) - Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala, Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada, Vinay Belgaumkar, Badal Nilawar) - xe2hpg compression (Himal Ghimiray Prasad) - Error code cleanups and fixes (Himal Prasad Ghimiray) - struct xe_device cleanup (Jani Nikula) - Avoid validating bos when only requesting an exec dma-fence (José Roberto de Souza) - Remove debug message from migrate_clear (José Roberto de Souza) - Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza) - Mark dpt and related vma as uncached (Juha-Pekka Heikkila) - Hwmon updates (Karthik Poosa) - KConfig fix when ACPI_WMI selcted (Lu Yao) - Update intel_uncore_read*() return types (Luca Coelho) - Mocs updates (Lucas De Marchi, Matt Roper) - Drop dynamic load-balancing workaround (Lucas De Marchi) - Fix a PVC workaround (Lucas De Marchi) - Group live kunit tests into a single module (Lucas De Marchi) - Various code cleanups (Lucas De Marchi) - Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock (Maarten Lankhorst) - Fix a bo leak (Marten Lankhorst) - Add LRC parsing for more GPU instructions (Matt Roper) - Add various definitions for hardware and IP (Matt Roper) - Define all possible engines in media IP descriptors (Matt Roper) - Various cleanups, asserts and code fixes (Matthew Auld) - Various cleanups and code fixes (Matthew Brost) - Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni) - Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost) - Handle timing out of already signaled jobs gracefully (Matthew Brost) - Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost) - Do not grab forcewakes when issuing GGTT TLB invalidation via GuC (Matthew Brost) - Drop ggtt invalidate from display code (Matthew Brost) - drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost) - Add debug messages for MMU notifier and VMA invalidate (Matthew Brost) - Use ordered wq for preempt fence waiting (Matthew Brost) - Initial development for SR-IOV support including some refactoring (Michal Wajdeczko) - Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko) - Move userptr over to start using hmm_range_fault (Oak Zeng) - Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli) - Pcode - and VRAM initialization check update (Riana Tauro) - Large PM update including i915 display patches, and a fix for one of those. (Rodrigo Vivi) - Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan) - GSC / HDCP updates (Suraj Kandpal) - Minor code cleanup (Tejas Upadhyay) - Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop (Thomas Hellström) - Backmerge (Thomas Hellström) - GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong) Signed-off-by: Dave Airlie <airlied@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG # v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0 # vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM= # =HouD # -----END PGP SIGNATURE----- # gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST # gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF # gpg: Can't check signature: No public key # Conflicts: # drivers/gpu/drm/xe/xe_device_types.h # drivers/gpu/drm/xe/xe_vm.c # drivers/gpu/drm/xe/xe_vm_types.h From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
2024-04-23Merge drm/drm-next into drm-misc-nextMaxime Ripard
Maíra needs a backmerge to apply v3d patches, and Danilo for some nouveau patches. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-04-22drm/buddy: Implement tracking clear page featureArunpravin Paneer Selvam
- Add tracking clear page feature. - Driver should enable the DRM_BUDDY_CLEARED flag if it successfully clears the blocks in the free path. On the otherhand, DRM buddy marks each block as cleared. - Track the available cleared pages size - If driver requests cleared memory we prefer cleared memory but fallback to uncleared if we can't find the cleared blocks. when driver requests uncleared memory we try to use uncleared but fallback to cleared memory if necessary. - When a block gets freed we clear it and mark the freed block as cleared, when there are buddies which are cleared as well we can merge them. Otherwise, we prefer to keep the blocks as separated. - Add a function to support defragmentation. v1: - Depends on the flag check DRM_BUDDY_CLEARED, enable the block as cleared. Else, reset the clear flag for each block in the list(Christian) - For merging the 2 cleared blocks compare as below, drm_buddy_is_clear(block) != drm_buddy_is_clear(buddy)(Christian) - Defragment the memory beginning from min_order till the required memory space is available. v2: (Matthew) - Add a wrapper drm_buddy_free_list_internal for the freeing of blocks operation within drm buddy. - Write a macro block_incompatible() to allocate the required blocks. - Update the xe driver for the drm_buddy_free_list change in arguments. - add a warning if the two blocks are incompatible on defragmentation - call full defragmentation in the fini() function - place a condition to test if min_order is equal to 0 - replace the list with safe_reverse() variant as we might remove the block from the list. v3: - fix Gitlab user reported lockup issue. - Keep DRM_BUDDY_HEADER_CLEAR define sorted(Matthew) - modify to pass the root order instead max_order in fini() function(Matthew) - change bool 1 to true(Matthew) - add check if min_block_size is power of 2(Matthew) - modify the min_block_size datatype to u64(Matthew) v4: - rename the function drm_buddy_defrag with __force_merge. - Include __force_merge directly in drm buddy file and remove the defrag use in amdgpu driver. - Remove list_empty() check(Matthew) - Remove unnecessary space, headers and placement of new variables(Matthew) - Add a unit test case(Matthew) v5: - remove force merge support to actual range allocation and not to bail out when contains && split(Matthew) - add range support to force merge function. v6: - modify the alloc_range() function clear page non merged blocks allocation(Matthew) - correct the list_insert function name(Matthew). Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Suggested-by: Christian König <christian.koenig@amd.com> Suggested-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419063538.11957-1-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-04-22drm: Fix plane SIZE_HINTS property docsVille Syrjälä
Fix the typos in the plane SIZE_HINTS kernel docs. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 9677547d8362 ("drm: Introduce plane SIZE_HINTS property") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240418114218.9162-1-ville.syrjala@linux.intel.com Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-22Merge tag 'drm-misc-next-2024-04-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.10-rc1: UAPI Changes: - Add SIZE_HINTS property for cursor planes. Cross-subsystem Changes: Core Changes: - Document the requirements and expectations of adding new driver-specific properties. - Assorted small fixes to ttm. - More Kconfig fixes. - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - Fixes for drm-panic, and option to test it. - Assorted small fixes and updates to edid. - Add drm_crtc_vblank_crtc and use it in vkms, nouveau. Driver Changes: - Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi. - Add drm panic to simpledrm, mgag200, imx, ast. - Use dev_err_probe in bridge/panel drivers. - Add Innolux G121X1-L03, LG sw43408 panels. - Use struct drm_edid in i915 bios parsing. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2dc1b7c6-1743-4ddd-ad42-36f700234fbe@linux.intel.com
2024-04-19drm/dp_mst: Add drm_dp_mst_aux_for_parent()Imre Deak
Add a function to get the AUX device of the parent of an MST port, used by a follow-up i915 patch in the patchset. v2: Move drm_dp_mst_aux_for_parent() forward declaration to this patch (Ankit) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-10-imre.deak@intel.com
2024-04-19drm/dp_mst: Factor out drm_dp_mst_port_is_logical()Imre Deak
Factor out a function to check if an MST port is logical, used by a follow-up i915 patch in the patchset. v2: Move drm_dp_mst_aux_for_parent() forward declaration to the next patch. (Ankit) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-9-imre.deak@intel.com
2024-04-19drm/dp: Add drm_dp_128b132b_supported()Imre Deak
Factor out a function to check for 128b/132b channel coding support used by a follow-up patch in the patchset. v2: s/drm_dp_uhbr_channel_coding_supported()/drm_dp128b132b_supported() (Jani) Cc: dri-devel@lists.freedesktop.org Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417141936.457796-1-imre.deak@intel.com
2024-04-19drm/i915/dp: Fix DSC line buffer depth programmingImre Deak
Fix the calculation of the DSC line buffer depth. This is limited both by the source's and sink's maximum line buffer depth, but the former one was not taken into account. On all Intel platform's the source's maximum buffer depth is 13, so the overall limit is simply the minimum of the source/sink's limit, regardless of the DSC version. This leaves the DSI DSC line buffer depth calculation as-is, trusting VBT. On DSC version 1.2 for sinks reporting a maximum line buffer depth of 16 the line buffer depth was incorrectly programmed as 0, leading to a corruption in color gradients / lines on the decompressed screen image. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-2-imre.deak@intel.com
2024-04-19Merge tag 'drm-intel-next-2024-04-17-1' of ↵Dave Airlie
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next Core Changes (DRM): - Fix documentation of DP tunnel functions (Imre) - DP MST read sideband messaging cap (Jani) - Preparation patches for Adaptive Sync SDP Support for DP (Mitul) Driver Changes: i915 core (non-display): - Documentation improvements (Nirmoy) - Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas) - Do not print 'pxp init failed with 0' when it succeed (Jose) - Clean-up, including removal of dead code for unsupported platforms (Lucas) - Adding new DG2 PCI ID (Ravi) {i915,xe} display: - Spelling fix (Colin Ian) - Document CDCLK components (Gustavo) - Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala) - BIOS/VBT/opregion related refactor (Jani, Ville, RK) - Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe) - Digital port related refactor/clean-up (Ville) - Fix 2s boot time regression on DP panel replay init (Animesh) - Remove redundant drm_rect_visible() overlay use (Arthur) - DSC HW state readout fixes (Imre) - Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville) - Disable AuxCCS framebuffers if built for Xe (Juha-Pekka) - Fix DSI init order (Ville) - DRRS related refactor and fixes (Bhanuprakash) - Fix DSB vblank waits with VRR (Ville) - General improvements on register name and use of REG_BIT (Ville) - Some display power well related improvements (Ville) - FBC changes for better w/a handling (Ville) - Make crtc disable more atomic (Ville) - Fix hwmon locking inversion in sysfs getter (Janusz) - Increase DP idle pattern wait timeout to 2ms (Shekhar) - PSR related fixes and improvents (Jouni) - Start using container_of_const() for some extra const safety (Ville) - Use drm_printer more on display code (Ville) - Fix Jasper Lake boot freeze (Jonathon) - Update Pipe src size check in skl_update_scaler (Ankit) - Enable MST mode for 128b/132b single-stream sideband (Jani) - Pass encoder around more for port/phy checks (Jani) - Some initial work to make display code more independent from i915 (Jani) - Pre-populate the cursor physical dma address (Ville) - Do not bump min backlight brightness to max on enable (Gareth) - Fix MTL supported DP rates - removal of UHBR13.5 (Arun) - Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit) - Bigjoiner modeset sequence redesign and MST support (Ville) - Enable Adaptive Sync SDP Support for DP (Mitul) - Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav) - HDCP related fixes (Suraj) - Fix i915_display_info debugfs when connectors are not active (Ville) - Clean up on Xe compat layer (Jani) - Add jitter WAs for MST/FEC/DSC links (Imre) - DMC wakelock implementation (Luca) Signed-off-by: Dave Airlie <airlied@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r # E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu # bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF # 02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv # 8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ # ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx # 7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ== # =JvZN # -----END PGP SIGNATURE----- # gpg: Signature made Wed 17 Apr 2024 23:22:09 AEST # gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown] # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zh_Q72gYKMMbge9A@intel.com
2024-04-19drm/mipi-dsi: add mipi_dsi_compression_mode_ext()Dmitry Baryshkov
Add the extended version of mipi_dsi_compression_mode(). It provides a way to specify the algorithm and PPS selector. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240408-lg-sw43408-panel-v5-3-4e092da22991@linaro.org
2024-04-19drm/mipi-dsi: use correct return type for the DSC functionsDmitry Baryshkov
The functions mipi_dsi_compression_mode() and mipi_dsi_picture_parameter_set() return 0-or-error rather than a buffer size. Follow example of other similar MIPI DSI functions and use int return type instead of size_t. Fixes: f4dea1aaa9a1 ("drm/dsi: add helpers for DSI compression mode and PPS packets") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240408-lg-sw43408-panel-v5-2-4e092da22991@linaro.org
2024-04-18drm/i915: use system include for drm headersJani Nikula
Use <> instead of "" for including headers from include/, even if the file is in the same directory. Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ed02b81fcbbc0d27be4af460c521aefbfdc76375.1712743191.git.jani.nikula@intel.com
2024-04-18drm/vblank: Introduce drm_crtc_vblank_crtc()Ville Syrjälä
Make life easier by providing a function that hands out the correct drm_vblank_crtc for a given a drm_crtc. Also abstract the lower level internals of the vblank code in a similar fashion. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408190611.24914-1-ville.syrjala@linux.intel.com Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-17drm/edid: make drm_edid_are_equal() staticJani Nikula
drm_edid_are_equal() is only used within drm_edid.c. Make it static. Do not encourage more uses of struct edid. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/aa79be9a5d0b08c71b82b86b5a8ff0f332e13c6a.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17drm/edid: group struct drm_edid based declarations togetherJani Nikula
Keep the declarations for struct drm_edid based functions together. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/2634de73734dfbf0a772511a80eab966c8206cf2.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17drm/edid: move all internal declarations to drm_crtc_internal.hJani Nikula
The declarations for internal EDID functions are a bit scattered. Put them all in drm_crtc_internal.h. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/9ae137ea51f9cc2ccb3899b0acda553e6a8ce2db.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17drm/displayid: move drm_displayid.h to drm_displayd_internal.hJani Nikula
There are no exported symbols for displayid, and it's all internal interfaces. Move the header to drivers/gpu/drm/drm_displayd_internal.h. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/220713d4e3cc364ac103ba689065ae96e075f1fa.1713259151.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-15drm/fb_dma: s/drm_panic_gem_get_scanout_buffer/drm_fb_dma_get_scanout_bufferMaíra Canal
On version 11 of the "drm/panic: Add a drm panic handler" series [1], Thomas suggested to change the name of the function `drm_panic_gem_get_scanout_buffer` to `drm_fb_dma_get_scanout_buffer` and this request was applied on version 12, which is the version that landed [2]. Although the name of the function changed on the C file, it didn't changed on the header file, leading to a compilation error as such: drivers/gpu/drm/imx/ipuv3/ipuv3-plane.c:780:24: error: use of undeclared identifier 'drm_fb_dma_get_scanout_buffer'; did you mean 'drm_panic_gem_get_scanout_buffer'? 780 | .get_scanout_buffer = drm_fb_dma_get_scanout_buffer, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | drm_panic_gem_get_scanout_buffer ./include/drm/drm_fb_dma_helper.h:23:5: note: 'drm_panic_gem_get_scanout_buffer' declared here 23 | int drm_panic_gem_get_scanout_buffer(struct drm_plane *plane, | ^ 1 error generated. Fix the compilation error by changing `drm_panic_gem_get_scanout_buffer` to `drm_fb_dma_get_scanout_buffer` on the header file. Link: https://lore.kernel.org/dri-devel/20240328120638.468738-1-jfalempe@redhat.com/ [1] Link: https://lore.kernel.org/dri-devel/aea2aa01-7f03-453b-8b30-8f4d90b1b47f@redhat.com/ [2] Fixes: 879b3b6511fe ("drm/fb_dma: Add generic get_scanout_buffer() for drm_panic") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240415151013.3210278-1-mcanal@igalia.com
2024-04-15drm/fb_dma: Add generic get_scanout_buffer() for drm_panicJocelyn Falempe
This was initialy done for imx6, but should work on most drivers using drm_fb_dma_helper. v8: * Replace get_scanout_buffer() logic with drm_panic_set_buffer() (Thomas Zimmermann) v9: * go back to get_scanout_buffer() * move get_scanout_buffer() to plane helper functions v12: * Rename drm_panic_gem_get_scanout_buffer to drm_fb_dma_get_scanout_buffer (Thomas Zimmermann) * Remove the #ifdef CONFIG_DRM_PANIC, and build it unconditionnaly, as it's a small function. (Thomas Zimmermann) Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-6-jfalempe@redhat.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-04-15drm/panic: Add a drm panic handlerJocelyn Falempe
This module displays a user friendly message when a kernel panic occurs. It currently doesn't contain any debug information, but that can be added later. v2 * Use get_scanout_buffer() instead of the drm client API. (Thomas Zimmermann) * Add the panic reason to the panic message (Nerdopolis) * Add an exclamation mark (Nerdopolis) v3 * Rework the drawing functions, to write the pixels line by line and to use the drm conversion helper to support other formats. (Thomas Zimmermann) v4 * Use drm_fb_r1_to_32bit for fonts (Thomas Zimmermann) * Remove the default y to DRM_PANIC config option (Thomas Zimmermann) * Add foreground/background color config option * Fix the bottom lines not painted if the framebuffer height is not a multiple of the font height. * Automatically register the device to drm_panic, if the function get_scanout_buffer exists. (Thomas Zimmermann) v5 * Change the drawing API, use drm_fb_blit_from_r1() to draw the font. * Also add drm_fb_fill() to fill area with background color. * Add draw_pixel_xy() API for drivers that can't provide a linear buffer. * Add a flush() callback for drivers that needs to synchronize the buffer. * Add a void *private field, so drivers can pass private data to draw_pixel_xy() and flush(). v6 * Fix sparse warning for panic_msg and logo. v7 * Add select DRM_KMS_HELPER for the color conversion functions. v8 * Register directly each plane to the panic notifier (Sima) * Add raw_spinlock to properly handle concurrency (Sima) * Register plane instead of device, to avoid looping through plane list, and simplify code. * Replace get_scanout_buffer() logic with drm_panic_set_buffer() (Thomas Zimmermann) * Removed the draw_pixel_xy() API, will see later if it can be added back. v9 * Revert to using get_scanout_buffer() (Sima) * Move get_scanout_buffer() and panic_flush() to the plane helper functions (Thomas Zimmermann) * Register all planes with get_scanout_buffer() to the panic notifier * Use drm_panic_lock() to protect against race (Sima) v10 * Move blit and fill functions back in drm_panic (Thomas Zimmermann). * Simplify the text drawing functions. * Use kmsg_dumper instead of panic_notifier (Sima). v12 * Use array for map and pitch in struct drm_scanout_buffer to support multi-planar format later. (Thomas Zimmermann) * Better indent struct drm_scanout_buffer declaration. (Thomas Zimmermann) Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-3-jfalempe@redhat.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-04-15drm/panic: Add drm panic lockingDaniel Vetter
Rough sketch for the locking of drm panic printing code. The upshot of this approach is that we can pretty much entirely rely on the atomic commit flow, with the pair of raw_spin_lock/unlock providing any barriers we need, without having to create really big critical sections in code. This also avoids the need that drivers must explicitly update the panic handler state, which they might forget to do, or not do consistently, and then we blow up in the worst possible times. It is somewhat racy against a concurrent atomic update, and we might write into a buffer which the hardware will never display. But there's fundamentally no way to avoid that - if we do the panic state update explicitly after writing to the hardware, we might instead write to an old buffer that the user will barely ever see. Note that an rcu protected deference of plane->state would give us the the same guarantees, but it has the downside that we then need to protect the plane state freeing functions with call_rcu too. Which would very widely impact a lot of code and therefore doesn't seem worth the complexity compared to a raw spinlock with very tiny critical sections. Plus rcu cannot be used to protect access to peek/poke registers anyway, so we'd still need it for those cases. Peek/poke registers for vram access (or a gart pte reserved just for panic code) are also the reason I've gone with a per-device and not per-plane spinlock, since usually these things are global for the entire display. Going with per-plane locks would mean drivers for such hardware would need additional locks, which we don't want, since it deviates from the per-console takeoverlocks design. Longer term it might be useful if the panic notifiers grow a bit more structure than just the absolute bare EXPORT_SYMBOL(panic_notifier_list) - somewhat aside, why is that not EXPORT_SYMBOL_GPL ... If panic notifiers would be more like console drivers with proper register/unregister interfaces we could perhaps reuse the very fancy console lock with all it's check and takeover semantics that John Ogness is developing to fix the console_lock mess. But for the initial cut of a drm panic printing support I don't think we need that, because the critical sections are extremely small and only happen once per display refresh. So generally just 60 tiny locked sections per second, which is nothing compared to a serial console running a 115kbaud doing really slow mmio writes for each byte. So for now the raw spintrylock in drm panic notifier callback should be good enough. Another benefit of making panic notifiers more like full blown consoles (that are used in panics only) would be that we get the two stage design, where first all the safe outputs are used. And then the dangerous takeover tricks are deployed (where for display drivers we also might try to intercept any in-flight display buffer flips, which if we race and misprogram fifos and watermarks can hang the memory controller on some hw). For context the actual implementation on the drm side is by Jocelyn and this patch is meant to be combined with the overall approach in v7 (v8 is a bit less flexible, which I think is the wrong direction): https://lore.kernel.org/dri-devel/20240104160301.185915-1-jfalempe@redhat.com/ Note that the locking is very much not correct there, hence this separate rfc. Starting from v10, I (Jocelyn) have included this patch in the drm_panic series, and done the corresponding changes. v2: - fix authorship, this was all my typing - some typo oopsies - link to the drm panic work by Jocelyn for context v10: - Use spinlock_irqsave/restore (John Ogness) v11: - Use macro instead of inline functions for drm_panic_lock/unlock (John Ogness) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-2-jfalempe@redhat.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-04-15drm/edid: add drm_edid_print_product_id()Jani Nikula
Add a function to print a decoded EDID vendor and product id to a drm printer, optionally with the raw data. v2: - refactor date printing - use seq_buf to avoid kasprintf() (Ville) - handle week == 0 (Ville) - use be16_to_cpu() on manufacturer_name Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Melissa Wen <mwen@igalia.com> # v1 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/32bbc83ee6557809ef6d7a5edb1bc8ef4d56d10f.1712655867.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-15drm/edid: add drm_edid_get_product_id()Jani Nikula
Add a struct drm_edid based function to get the vendor and product ID from an EDID. Add a separate struct for defining this part of the EDID, with defined byte order for manufacturer name, product code and serial number. v2: Define manufacturer_name as __be16 instead of u8[2] (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/df0e7dedbf7f2c190039d6e6eae3e126eba113c9.1712655867.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-12Merge drm/drm-next into drm-xe-nextThomas Hellström
Backmerging drm-next in order to get up-to-date and in particular to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-04-11drm: Introduce plane SIZE_HINTS propertyVille Syrjälä
Add a new immutable plane property by which a plane can advertise a handful of recommended plane sizes. This would be mostly exposed by cursor planes as a slightly more capable replacement for the DRM_CAP_CURSOR_WIDTH/HEIGHT caps, which can only declare a one size fits all limit for the whole device. Currently eg. amdgpu/i915/nouveau just advertize the max cursor size via the cursor size caps. But always using the max sized cursor can waste a surprising amount of power, so a better strategy is desirable. Most other drivers don't specify any cursor size at all, in which case the ioctl code just claims that 64x64 is a great choice. Whether that is actually true is debatable. A poll of various compositor developers informs us that blindly probing with setcursor/atomic ioctl to determine suitable cursor sizes is not acceptable, thus the introduction of the new property to supplant the cursor size caps. The compositor will now be free to select a more optimal cursor size from the short list of options. Note that the reported sizes (either via the property or the caps) make no claims about things such as plane scaling. So these things should only really be consulted for simple "cursor like" use cases. Userspace consumer in the form of mutter seems ready: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3165 v2: Try to add some docs v3: Specify that value 0 is reserved for future use (basic idea from Jonas) Drop the note about typical hardware (Pekka) v4: Update the docs to indicate the list is "in order of preference" Add a a link to the mutter MR v5: Limit to cursors only for now (Simon) Cc: Jonas Ådahl <jadahl@redhat.com> Cc: Sameer Lattannavar <sameer.lattannavar@intel.com> Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com> Reviewed-by: Simon Ser <contact@emersion.fr> Acked-by: Daniel Stone <daniels@collabora.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240318204408.9687-2-ville.syrjala@linux.intel.com
2024-04-10drm: remove unused header gma_drm.hJani Nikula
gma_drm.h has become an empty, unused header. Remove. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408104230.3191827-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-04drm/dp: Add Adaptive Sync SDP loggingMitul Golani
Add structure representing Adaptive Sync Secondary Data Packet (AS SDP). Also, add Adaptive Sync SDP logging in drm_dp_helper.c to facilitate debugging. --v2: - Update logging. [Jani, Ankit] - Use 'as_sdp' instead of 'async' [Ankit] - Correct define placeholders to where they are actually used. [Jani] - Update members in 'as_sdp' structure to make it uniform. [Jani] --v3: - Added changes to dri-devel mailing list. No code changes. --v4: - Instead of directly using operation mode, use an enum to accommodate all operation modes (Ankit). --v5: Nit-pick changes to commit message. --v6: - Add correct place holder and name change for AS_SDP_OP_MODE. - Separate i915 changes from drm changes. - Remove extra lines. --v7: - Add drm/dp in subject line (Ankit) Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-3-mitulkumar.ajitkumar.golani@intel.com
2024-04-04drm/dp: Add support to indicate if sink supports AS SDPMitul Golani
Add an API that indicates support for Adaptive Sync SDP in the sink, which can be utilized by the rest of the DP programming. --v1: - Format commit message properly. Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240322031157.3823909-2-mitulkumar.ajitkumar.golani@intel.com
2024-04-02Merge drm/drm-next into drm-intel-nextRodrigo Vivi
Catching up on 6.9-rc2 Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-04-02drm/ast: Automatically clean up poll helperThomas Zimmermann
Automatically clean up the conncetor-poll thread as part of the DRM device release. The new helper drmm_kms_helper_poll_init() provides a shared implementation for all drivers. v6: - fix kernel doc comment (Sui, kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-14-tzimmermann@suse.de
2024-04-02drm/ast: Implement polling for VGA and SIL164 connectorsThomas Zimmermann
Implement polling for VGA and SIL164 connectors. Set the flag DRM_CONNECTOR_POLL_DISCONNECT for each to detect the removal of the monitor cable. Implement struct drm_connector_helper_funcs.detect_ctx for each type of connector by testing for EDID data. The helper drm_connector_helper_detect_ctx() implements .detect_ctx() on top of the connector's DDC channel. The function can be used by other drivers as companion to drm_connector_helper_get_modes(). v6: - change helper name to drm_connector_helper_detec_from_ddc() (Maxime, Sui) v5: - share implementation in drm_connector_helper_detect_ctx() (Maxime) - test for DDC presence with drm_probe_ddc() (Maxime, Jani) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-13-tzimmermann@suse.de
2024-04-02Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get v6.9-rc2 changes into drm-misc-next. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-03-28drm/display: Make DisplayPort CEC-over-AUX Kconfig name consistentMaxime Ripard
While most display helpers Kconfig symbols have the DRM_DISPLAY prefix, the DisplayPort CEC tunnelling implementation uses CONFIG_DRM_DISPLAY_DP_AUX_CEC. Since the number of users is limited, we can easily rename it to make it consistent. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-4-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-18 16:34:42 +0000