Age | Commit message (Collapse) | Author |
|
New PCI IDs are added in Bspec for DG2 platform, add them in driver
Bspec: 44477
Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326103241.3832494-1-ravi.kumar.vodapalli@intel.com
|
|
New PCI IDs are added in Bspec for DG2 platform, add them in driver
Bspec: 44477
Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326103825.3832879-1-ravi.kumar.vodapalli@intel.com
|
|
In response to my patch removing the "wait for HPD" logic at the
beginning of the MSM DP transfer() callback [1], we had some debate
about what the "This is an optional function" meant in the
documentation of the wait_hpd_asserted() callback. Let's clarify.
As talked about in the MSM DP patch [1], before wait_hpd_asserted()
was introduced there was no great way for panel drivers to wait for
HPD in the case that the "built-in" HPD signal was used. Panel drivers
could only wait for HPD if a GPIO was used. At the time, we ended up
just saying that if we were using the "built-in" HPD signal that DP
AUX controllers needed to wait for HPD themselves at the beginning of
their transfer() callback. The fact that the wait for HPD at the
beginning of transfer() was awkward/problematic was the whole reason
wait_hpd_asserted() was added.
Let's make it obvious that if a DP AUX controller implements
wait_hpd_asserted() that they don't need a loop waiting for HPD at the
start of their transfer() function. We'll still allow DP controllers
to work the old way but mark it as deprecated.
[1] https://lore.kernel.org/r/20240315143621.v2.3.I535606f6d4f7e3e5588bb75c55996f61980183cd@changeid
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319135836.v2.1.I521dad0693cc24fe4dd14cba0c7048d94f5b6b41@changeid
|
|
Pull drm fixes from Dave Airlie:
"Fixes from the last week (or 3 weeks in amdgpu case), after amdgpu,
it's xe and nouveau then a few scattered core fixes.
core:
- fix rounding in drm_fixp2int_round()
bridge:
- fix documentation for DRM_BRIDGE_OP_EDID
sun4i:
- fix 64-bit division on 32-bit architectures
tests:
- fix dependency on DRM_KMS_HELPER
probe-helper:
- never return negative values from .get_modes() plus driver fixes
xe:
- invalidate userptr vma on page pin fault
- fail early on sysfs file creation error
- skip VMA pinning on xe_exec if no batches
nouveau:
- clear bo resource bus after eviction
- documentation fixes
- don't check devinit disable on GSP
amdgpu:
- Freesync fixes
- UAF IOCTL fixes
- Fix mmhub client ID mapping
- IH 7.0 fix
- DML2 fixes
- VCN 4.0.6 fix
- GART bind fix
- GPU reset fix
- SR-IOV fix
- OD table handling fixes
- Fix TA handling on boards without display hardware
- DML1 fix
- ABM fix
- eDP panel fix
- DPPCLK fix
- HDCP fix
- Revert incorrect error case handling in ioremap
- VPE fix
- HDMI fixes
- SDMA 4.4.2 fix
- Other misc fixes
amdkfd:
- Fix duplicate BO handling in process restore"
* tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/amdgpu/pm: Don't use OD table on Arcturus
drm/amdgpu: drop setting buffer funcs in sdma442
drm/amd/display: Fix noise issue on HDMI AV mute
drm/amd/display: Revert Remove pixle rate limit for subvp
Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode"
Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init()"
drm/amd/display: Add a dc_state NULL check in dc_state_release
drm/amd/display: Return the correct HDCP error code
drm/amd/display: Implement wait_for_odm_update_pending_complete
drm/amd/display: Lock all enabled otg pipes even with no planes
drm/amd/display: Amend coasting vtotal for replay low hz
drm/amd/display: Fix idle check for shared firmware state
drm/amd/display: Update odm when ODM combine is changed on an otg master pipe with no plane
drm/amd/display: Init DPPCLK from SMU on dcn32
drm/amd/display: Add monitor patch for specific eDP
drm/amd/display: Allow dirty rects to be sent to dmub when abm is active
drm/amd/display: Override min required DCFCLK in dml1_validate
drm/amdgpu: Bypass display ta if display hw is not available
drm/amdgpu: correct the KGQ fallback message
drm/amdgpu/pm: Check the validity of overdiver power limit
...
|
|
Amend drm_dp_read_mst_cap() to return an enum, indicating "SST", "SST
with sideband messaging", or "MST". Modify all call sites to take the
new return value into account.
v2:
- Rename enumerators (Ville)
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b32a3704934871a67d06420b760e148b76c5ced8.1710839496.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The BOs in a bulk move must share all the same reservation object
to make sure that we lock the whole bulk during eviction.
Actually document and enforce that with a warning.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312105555.3065-1-christian.koenig@amd.com
|
|
As well noted by Pekka[1], the rounding of drm_fixp2int_round is wrong.
To round a number, you need to add 0.5 to the number and floor that,
drm_fixp2int_round() is adding 0.0000076. Make it add 0.5.
[1]: https://lore.kernel.org/all/20240301135327.22efe0dd.pekka.paalanen@collabora.com/
Fixes: 8b25320887d7 ("drm: Add fixed-point helper to get rounded integer values")
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240316-drm_fixed-v2-1-c1bc2665b5ed@riseup.net
|
|
Create a type drm_edid_ident as the identity of an EDID. Currently it
contains panel id and monitor name.
Create a function that can match a given EDID and an identity:
1. Reject if the panel id doesn't match.
2. If name is not null in identity, try to match it in the detailed timing
blocks. Note that some panel vendors put the monitor name after
EDID_DETAIL_MONITOR_STRING.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307230653.1807557-3-hsinyi@chromium.org
|
|
It's found that some panels have variants that they share the same panel id
although their EDID and names are different. Besides panel id, now we need
more information from the EDID base block to distinguish these panel
variants.
Add drm_edid_read_base_block() to return the EDID base block, which is
wrapped in struct drm_edid.
Caller can further use it to get panel id or check if the block contains
certain strings, such as panel name.
Merge drm_edid_get_panel_id() and edid_extract_panel_id() into one
function.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307230653.1807557-2-hsinyi@chromium.org
|
|
While the commit d807ad80d811 ("drm/bridge: add ->edid_read hook and
drm_bridge_edid_read()") and the commit 27b8f91c08d9 ("drm/bridge:
remove ->get_edid callback") replaced ->get_edid() callback with the
->edid_read(), they failed to update documentation. Fix the drm_bridge
docs to point to edid_read().
Fixes: 27b8f91c08d9 ("drm/bridge: remove ->get_edid callback")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240310-drm-bridge-fix-docs-v1-1-70d3d741cb7a@linaro.org
|
|
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
|
|
The .get_modes() callback is supposed to return the number of modes,
never a negative error code. If a negative value is returned, it'll just
be interpreted as a negative count, and added to previous calculations.
Document the rules, but handle the negative values gracefully with an
error message.
Cc: stable@vger.kernel.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/50208c866facc33226a3c77b82bb96aeef8ef310.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pull documentation updates from Jonathan Corbet:
"A moderatly busy cycle for development this time around.
- Some cleanup of the main index page for easier navigation
- Rework some of the other top-level pages for better readability
and, with luck, fewer merge conflicts in the future.
- Submit-checklist improvements, hopefully the first of many.
- New Italian translations
- A fair number of kernel-doc fixes and improvements. We have also
dropped the recommendation to use an old version of Sphinx.
- A new document from Thorsten on bisection
... and lots of fixes and updates"
* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
docs: verify/bisect: fixes, finetuning, and support for Arch
docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
docs: submit-checklist: use subheadings
docs: submit-checklist: structure by category
docs: new text on bisecting which also covers bug validation
docs: drop the version constraints for sphinx and dependencies
docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
docs: Restore "smart quotes" for quotes
docs/zh_CN: accurate translation of "function"
docs: Include simplified link titles in main index
docs: Correct formatting of title in admin-guide/index.rst
docs: kernel_feat.py: fix build error for missing files
MAINTAINERS: Set the field name for subsystem profile section
kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
Fixed case issue with 'fault-injection' in documentation
kernel-doc: handle #if in enums as well
Documentation: update mailing list addresses
doc: kerneldoc.py: fix indentation
scripts/kernel-doc: simplify signature printing
...
|
|
Temporarily lock the fbdev buffer object during updates to prevent
memory managers from evicting/moving the buffer. Moving a buffer
object while update its content results in undefined behaviour.
Fbdev-generic updates its buffer object from a shadow buffer. Gem-shmem
and gem-dma helpers do not move buffer objects, so they are safe to be
used with fbdev-generic. Gem-vram and qxl are based on TTM, but pin
buffer objects are part of the vmap operation. So both are also safe
to be used with fbdev-generic.
Amdgpu and nouveau do not pin or lock the buffer object during an
update. Their TTM-based memory management could move the buffer object
while the update is ongoing.
The new vmap_local and vunmap_local helpers hold the buffer object's
reservation lock during the buffer update. This prevents moving the
buffer object on all memory managers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # virtio-gpu
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227113853.8464-11-tzimmermann@suse.de
|
|
Acquire the buffer object's reservation lock in drm_gem_pin() and
remove locking the drivers' GEM callbacks where necessary. Same for
unpin().
DRM drivers and memory managers modified by this patch will now have
correct dma-buf locking semantics: the caller is responsible for
holding the reservation lock when calling the pin or unpin callback.
DRM drivers and memory managers that are not modified will now be
protected against concurent invocation of their pin and unpin callbacks.
PRIME does not implement struct dma_buf_ops.pin, which requires
the caller to hold the reservation lock. It does implement struct
dma_buf_ops.attach, which requires to callee to acquire the
reservation lock. The PRIME code uses drm_gem_pin(), so locks
are now taken as specified. Same for unpin and detach.
The patch harmonizes GEM pin and unpin to have non-interruptible
reservation locking across all drivers, as is already the case for
vmap and vunmap. This affects gem-shmem, gem-vram, loongson, qxl and
radeon.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # virtio-gpu
Link: https://patchwork.freedesktop.org/patch/msgid/20240227113853.8464-10-tzimmermann@suse.de
|
|
Export drm_gem_shmem_pin_locked() and acquire the reservation lock
directly in GEM pin callback. Same for unpin. Prepares for further
changes.
Dma-buf locking semantics require callers to hold the buffer's
reservation lock when invoking the pin and unpin callbacks. Prepare
gem-shmem accordingly by pushing locking out of the implementation.
A follow-up patch will fix locking for all GEM code at once.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # virtio-gpu
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227113853.8464-2-tzimmermann@suse.de
|
|
Mark some members private to silence kernel-doc warnings, and add FIXME
comments.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffc58be256d71e6a98eb9f13337add64458d3476.1709898638.git.jani.nikula@intel.com
|
|
struct seq_file needs a forward declaration in some configs. Sort the
forward declarations while at it.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403072259.EEC2Vf1X-lkp@intel.com/
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b92373759bba305ddf8d24fdca345f195400e206.1709898638.git.jani.nikula@intel.com
|
|
There's no proper way to document function pointer members, but at least
silence the warnings.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e80e74ac4b6c5f1df3bc2dd98651ba289aae8e83.1709898638.git.jani.nikula@intel.com
|
|
Fix some formatting errors and excess documentation.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0f6d243c4e5eb1564ef2f4bb5bb834ee2c0305b.1709898638.git.jani.nikula@intel.com
|
|
Include <linux/pgtable.h> for pgprot_t.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb87ab4b4490c53e9ece66d53c4f178ead244cb5.1709898638.git.jani.nikula@intel.com
|
|
Some renames, some formatting fixes, add some missing documentation.
v3: Fix struct ttm_buffer_object .sg documentation (Christian)
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240308160750.3741833-1-jani.nikula@intel.com
|
|
Make documentation match code. Slightly fix up the documentation
comments while at it.
v2:
- Move comments next to members instead of struct comment (Lucas)
- Small fixups while at it
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7c26256dc00f970f94d145b73e341c36f553dfe4.1709898638.git.jani.nikula@intel.com
|
|
Make the documentation match code.
v2: Small fixups while at it (Lucas)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c7ba8db172101c40b686463f169ec579a509f29.1709898638.git.jani.nikula@intel.com
|
|
There's no proper way to document function pointer members, but at least
silence the warnings.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a84bd76162290940f709f5cb6e432e5e1f75a3b9.1709898638.git.jani.nikula@intel.com
|
|
Document structs drm_encoder_slave_funcs, drm_encoder_slave, and
drm_i2c_encoder_driver.
v2: Actually document the structs instead of just silencing kernel-doc
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/19bc9672c8ae4f7aee235665a4d2360e8790193d.1709898638.git.jani.nikula@intel.com
|
|
Backmerging to get the latest fixes from drm-next; specifically the
build fix from the patchset at [1]. Also fixes the build by removing
an unused variable from rzg2l_du_vsp_atomic_flush().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/130720/ # 1
|
|
Rename dma_fence to fence to match code.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36d18b315fd9a6788484667f644b3fea347fb007.1709749576.git.jani.nikula@intel.com
|
|
Include <linux/err.h> for ERR_PTR.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e9b3ea30984b913f6e32ed35e0575438dff8278c.1709749576.git.jani.nikula@intel.com
|
|
Remove excess funcs kernel-doc.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/02000be3455de639f32bde88f632ae8744142083.1709749576.git.jani.nikula@intel.com
|
|
Include <linux/types.h> for types used.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3a38688e90bb775380aad5b6aad5dce3d9d87ca7.1709749576.git.jani.nikula@intel.com
|
|
As the documentation says, all the fields are considered private. Mark
them private also for kernel-doc to silence warnings.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6dc5b1df34abc10d416c2db5b390440cf56e21ce.1709749576.git.jani.nikula@intel.com
|
|
Add a number of require includes and forward declare struct
drm_crtc. s/crc/crcs/ kernel-doc to match code.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/290b006bb348a03bd7c4c062d337df21fdaced53.1709749576.git.jani.nikula@intel.com
|
|
Drop excess vcpi member documentation.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/606eee280718ba372093fdebbda42c7581dbd827.1709749576.git.jani.nikula@intel.com
|
|
Include <drm/drm_bridge.h> and forward declare struct platform device.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9534ca7dfba96580950e116c84ce0fa68fdf93a4.1709749576.git.jani.nikula@intel.com
|
|
Include <linux/types.h> for u8.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/115327b880b69b1c8ad157e5ff7f6b419868fab0.1709749576.git.jani.nikula@intel.com
|
|
s/_features/_feat/ to match code.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f909224abc8d542a89b66b957a32f152f42e9bba.1709749576.git.jani.nikula@intel.com
|
|
ARL-H uses the same media and display IP as MTL, and a version 12.74
graphics IP (referred to as Xe_LPG+). From a driver point of view, we
should be able to just treat the whole platform as MTL and rely on
GRAPHICS_VERx100 checks to handle any spots where ARL's Xe_LPG+ needs
different handling from MTL's Xe_LPG (i.e., workarounds).
v2: Resolve conflict and Reorder PCI ids in sorted order
v3: Append signed-off-by commiter to this commit
Bspec: 55420
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229070806.3402641-4-dnyaneshwar.bhadane@intel.com
|
|
Previously we would never try to move a BO into the preferred placements
when it ever landed in a busy placement since those were considered
compatible.
Rework the whole handling and finally unify the idle and busy handling.
ttm_bo_validate() is now responsible to try idle placement first and then
use the busy placement if that didn't worked.
Drawback is that we now always try the idle placement first for each
validation which might cause some additional CPU overhead on overcommit.
v2: fix kerneldoc warning and coding style
v3: take care of XE as well
v4: keep the ttm_bo_mem_space functionality as it is for now, only add
new handling for ttm_bo_validate as suggested by Thomas
v5: fix bug pointed out by Matthew
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> v3
Link: https://patchwork.freedesktop.org/patch/msgid/20240229134003.3688-1-christian.koenig@amd.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
https://anongit.freedesktop.org/git/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
Cross-subsystem Changes:
backlight:
- corgi: include backlight header
fbdev:
- Cleanup includes in public header file
- fbtft: Include backlight header
Core Changes:
edid:
- Remove built-in EDID data
dp:
- Avoid AUX transfers on powered-down displays
- Add VSC SDP helpers
modesetting:
- Add sanity checks for polling
- Cleanups
scheduler:
- Cleanups
tests:
- Add helpers for mode-setting tests
Driver Changes:
i915:
- Use shared VSC SDP helper
mgag200:
- Work around PCI write bursts
mxsfb:
- Use managed mode config
nouveau:
- Include backlight header where necessary
qiac:
- Cleanups
sun4:
- HDMI: updates to atomic mode setting
tegra:
- Fix GEM refounting in error paths
tidss:
- Fix multi display
- Fix initial Z position
v3d:
- Support display MMU page size
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229084806.GA21616@localhost.localdomain
|
|
If an eDP panel is not powered on then any attempts to talk to it over
the DP AUX channel will timeout. Unfortunately these attempts may be
quite slow. Userspace can initiate these attempts either via a
/dev/drm_dp_auxN device or via the created i2c device.
Making the DP AUX drivers timeout faster is a difficult proposition.
In theory we could just poll the panel's HPD line in the AUX transfer
function and immediately return an error there. However, this is
easier said than done. For one thing, there's no hard requirement to
hook the HPD line up for eDP panels and it's OK to just delay a fixed
amount. For another thing, the HPD line may not be fast to probe. On
parade-ps8640 we need to wait for the bridge chip's firmware to boot
before we can get the HPD line and this is a slow process.
The fact that the transfers are taking so long to timeout is causing
real problems. The open source fwupd daemon sometimes scans DP busses
looking for devices whose firmware need updating. If it happens to
scan while a panel is turned off this scan can take a long time. The
fwupd daemon could try to be smarter and only scan when eDP panels are
turned on, but we can also improve the behavior in the kernel.
Let's let eDP panels drivers specify that a panel is turned off and
then modify the common AUX transfer code not to attempt a transfer in
this case.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid
|
|
We're going to need a full-blown, functional, KMS device to test more
components of the atomic modesetting infrastructure.
Let's add a new helper to create a dumb, mocked, CRTC. By default it
will create a CRTC relying only on the default helpers, but drivers are
free to deviate from that.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-4-8f4af575fce2@kernel.org
|
|
We're going to need a full-blown, functional, KMS device to test more
components of the atomic modesetting infrastructure.
Let's add a new helper to create a dumb, mocked, primary plane. By
default, it will create a linear XRGB8888 plane, using the default
helpers.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-3-8f4af575fce2@kernel.org
|
|
We have a few functions declared in our kunit helpers header, some of
them dereferencing the struct drm_driver.
However, we don't include the drm_drv.h header file defining that
structure, leading to compilation errors if we don't include both
headers.
Fixes: d98780310719 ("drm/tests: helpers: Allow to pass a custom drm_driver")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-1-8f4af575fce2@kernel.org
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull #2 for v6.9:
Features and functionality:
- DP tunneling and bandwidth allocation support (Imre)
- Add more ADL-N PCI IDs (Gustavo)
- Enable fastboot also on older platforms (Ville)
- Bigjoiner force enable debugfs option for testing (Stan)
Refactoring and cleanups:
- Remove unused structs and struct members (Jiri Slaby)
- Use per-device debug logging (Ville)
- State check improvements (Ville)
- Hardcoded cd2x divider cleanups (Ville)
- CDCLK documentation updates (Ville, Rodrigo)
Fixes:
- HDCP MST Type1 fixes (Suraj)
- Fix MTL C20 PHY PLL values (Ravi)
- More hardware access prevention during init (Imre)
- Always enable decompression with tile4 on Xe2 (Juha-Pekka)
- Improve LNL package C residency (Suraj)
drm core changes:
- DP tunneling and bandwidth allocation helpers (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sf1devbj.fsf@intel.com
|
|
Handle DP tunnel IRQs a sink (or rather a BW management component like
the Thunderbolt Connection Manager) raises to signal the completion of a
BW request by the driver, or to signal any state change related to the
link BW.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-18-imre.deak@intel.com
|
|
Add support for Display Port tunneling. For now this includes the
support for Bandwidth Allocation Mode (BWA), leaving adding Panel Replay
support for later.
BWA allows using displays that share the same (Thunderbolt) link with
their maximum resolution. Atm, this may not be possible due to the
coarse granularity of partitioning the link BW among the displays on the
link: the BW allocation policy is in a SW/FW/HW component on the link
(on Thunderbolt it's the SW or FW Connection Manager), independent of
the driver. This policy will set the DPRX maximum rate and lane count
DPCD registers the GFX driver will see (0x00000, 0x00001, 0x02200,
0x02201) based on the available link BW.
The granularity of the current BW allocation policy is coarse, based on
the required link rate in the 1.62Gbs..8.1Gbps range and it may prevent
using higher resolutions all together: the display connected first will
get a share of the link BW which corresponds to its full DPRX capability
(regardless of the actual mode it uses). A subsequent display connected
will only get the remaining BW, which could be well below its full
capability.
BWA solves the above coarse granularity (reducing it to a 250Mbs..1Gps
range) and first-come/first-served issues by letting the driver request
the BW for each display on a link which reflects the actual modes the
displays use.
This patch adds the DRM core helper functions, while a follow-up change
in the patchset takes them into use in the i915 driver.
v2:
- Fix prepare_to_wait vs. wake-up cond check order in
allocate_tunnel_bw(). (Ville)
- Move tunnel==NULL checks from callers in drivers to here. (Ville)
- Avoid var inits in declaration blocks that can fail or have
side-effects. (Ville)
- Use u8 for driver and group IDs. (Ville)
- Simplify API removing drm_dp_tunnel_get/put_untracked(). (Ville)
- Reuse str_yes_no() instead of a local yes_no_chr(). (Ville)
- s/drm_dp_tunnel_atomic_clear_state()/free_tunnel_state() and unexport
the function. (Ville)
- s/clear_tunnel_group_state()/free_group_state() and move kfree() to
this function. (Ville)
- Add separate group_free_bw() helper and describe what the tunnel
estimated BW includes. (Ville)
- Improve help text for CONFIG_DRM_DISPLAY_DP_TUNNEL. (Ville)
- Add code comment explaining the purpose of DPCD reg read helpers.
(Ville)
- Add code comment describing the tunnel group name prefix format.
(Ville)
- Report the allocated BW as undetermined until the first allocation
request.
- Skip allocation requests matching the previous request.
- Clear any stale BW request status flags before a new request.
- Add missing error return check of drm_dp_tunnel_atomic_get_group_state()
in drm_dp_tunnel_atomic_set_stream_bw().
- Add drm_dp_tunnel_get_allocated_bw().
- s/drm_dp_tunnel_atomic_get_tunnel_bw/drm_dp_tunnel_atomic_get_required_bw
- Fix return value description in function doc of drm_dp_tunnel_detect().
- Add function documentation to all exported functions.
v3:
- Improve grouping of fields in drm_dp_tunnel_group struct. (Uma)
- Fix validating the BW granularity DPCD reg value. (Uma)
- Document return value of check_and_clear_status_change(). (Uma)
- Fix resetting drm_dp_tunnel_ref::tunnel in drm_dp_tunnel_ref_put().
(Ville)
- Allow for ALLOCATED_BW to change after a BWA enable/disable sequence.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-2-imre.deak@intel.com
|
|
Copy intel_dp_max_data_rate() to DRM core. It will be needed by a
follow-up DP tunnel patch, checking the maximum rate the DPRX (sink)
supports. Accordingly use the drm_dp_max_dprx_data_rate() name for
clarity. This patchset will also switch calling the new DRM function
in i915 instead of intel_dp_max_data_rate().
While at it simplify the function documentation/comments, removing
parts described already by drm_dp_bw_channel_coding_efficiency().
v2: (Ville)
- Remove max_link_rate_kbps.
- Simplify the function documentation.
v3:
- Rebased on latest drm-tip.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-1-imre.deak@intel.com
|
|
Backmerging to get drm-misc-next up to v6.8-rc6.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222135841.GA6677@localhost.localdomain
|