| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"This is mainly set of cleanups of asm-generic/io.h, resolving problems
with inconsistent semantics of ioread64/iowrite64 that were causing
runtime and build issues.
The "GENERIC_IOMAP" version that switches between inb()/outb() and
readb()/writeb() style accessors is now only used on architectures
that have PC-style ISA devices that are not memory mapped (x86, uml,
m68k-q40 and powerpc-powernv), while alpha and parisc use a more
complicated variant and everything else just maps the ioread
interfaces to plan MMIO (readb/writeb etc).
In addition there are two small changes from Raag Jadav to simplify
the asm-generic/io.h indirect inclusions and from Jann Horn to fix a
corner case with read_word_at_a_time"
* tag 'asm-generic-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
rwonce: fix crash by removing READ_ONCE() for unaligned read
rwonce: handle KCSAN like KASAN in read_word_at_a_time()
m68k: coldfire: select PCI_IOMAP for PCI
mips: export pci_iounmap()
mips: fix PCI_IOBASE definition
m68k/nommu: stop using GENERIC_IOMAP
mips: drop GENERIC_IOMAP wrapper
powerpc: asm/io.h: remove split ioread64/iowrite64 helpers
parisc: stop using asm-generic/iomap.h
sh: remove duplicate ioread/iowrite helpers
alpha: stop using asm-generic/iomap.h
io.h: drop unused headers
drm/draw: include missing headers
asm-generic/io.h: rework split ioread64/iowrite64 helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
|
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
[ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0
[ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0
[ 115.001880][ T5313] Call Trace:
[ 115.002222][ T5313] <TASK>
[ 115.007813][ T5313] io_send+0x4fe/0x10f0
[ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740
[ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0
[ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600
[ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0
As the comment states, io_req_post_cqe() should only be used by
multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are
not. Add a flag signifying whether a request wants to post multiple
CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but
that's left out for simplicity.
Cc: stable@vger.kernel.org
Fixes: a05d1f625c7aa ("io_uring/net: support bundles for send")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8b611dbb54d1cd47a88681f5d38c84d0c02bc563.1743067183.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
|
Pull zstd updates from Nick Terrell:
"Update zstd to the latest upstream release v1.5.7.
The two major motivations for updating Zstandard are to keep the code
up to date, and to expose API's needed by Intel for the QAT
compression accelerator.
Imported cleanly from the upstream tag v1.5.7-kernel, which is signed
by upstream's signing key EF8FE99528B52FFD"
Link: https://github.com/facebook/zstd/releases/tag/v1.5.7
Link: https://github.com/facebook/zstd/releases/tag/v1.5.7-kernel
Link: https://keyserver.ubuntu.com/pks/lookup?search=EF8FE99528B52FFD&fingerprint=on&op=index
* tag 'zstd-linus-v6.15-rc1' of https://github.com/terrelln/linux:
zstd: Import upstream v1.5.7
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
|
|
Sorting headers alphabetically helps locating duplicates,
and makes it easier to figure out where to insert new headers.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Every client driver has the struct cmdq_client information, so
it's not necessary to store it in struct cmdq_pkt. cl is used to
store struct cmdq_client information and now no client driver use
it, so remove it.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
|
|
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD changes:
- The atmel,dataflash binding has been converted to yaml and the
physmap one constrained. Some logs are improved, error path are
getting reworked a bit, few patches target the use of
str_enabled_disabled().
Raw NAND changes:
- i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
SPI NAND changes:
- OTP support has been brought, and ESMT and Micron manufacturer
drivers implement it.
- Read retry, and Macronix manufacturer driver implement it.
SPI NOR changes:
- Adding support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start
using the scope based mutex cleanup helpers.
There is also a bunch of minor improvements and fixes in drivers
and bindings"
* tag 'mtd/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (34 commits)
dt-bindings: mtd: atmel,dataflash: convert txt to yaml
mtd: mchp48l640: Use str_enable_disable() in mchp48l640_write_prepare()
mtd: rawnand: gpmi: Use str_enabled_disabled() in gpmi_nand_attach_chip()
mtd: mtdpart: Do not supply NULL to printf()
dt-bindings: mtd: gpmi-nand: Add compatible string for i.MX8 chips
mtd: nand: Fix a kdoc comment
mtd: spinand: Improve spinand_info macros style
mtd: spi-nor: drop unused <linux/of_platform.h>
mtd: spi-nor: explicitly include <linux/of.h>
mtd: spi-nor: explicitly include <linux/math64.h>
mtd: spi-nor: macronix: add support for mx66{l2, u1}g45g
mtd: spi-nor: macronix: Add post_sfdp fixups for Quad Input Page Program
mtd: Fix error handling in mtd_device_parse_register() error path
mtd: capture device name setting failure when adding mtd
mtd: Add check for devm_kcalloc()
mtd: Replace kcalloc() with devm_kcalloc()
dt-bindings: mtd: physmap: Ensure all properties are defined
mtd: rawnand: brcmnand: fix PM resume warning
dt-bindings: mtd: mxc-nand: Document fsl,imx31-nand
mtd: spinand: macronix: Add support for read retry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- PlayStation 5 controllers support (Alex Henrie)
- big revamp and modernization of the aged hid-pidff force feedback
driver (Tomasz Pakuła)
- conversion of hid-lg-g15 to standard multicolor LED API (Kate Hsuan)
- improvement of behavior of Human Presence Sensor (HPD) in amd_sfh
driver (Mario Limonciello)
- other assorted fixes, code cleanups and device ID additions
* tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (70 commits)
HID: remove superfluous (and wrong) Makefile entry for CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
HID: Intel-thc-hid: Intel-quickspi: Correct device state names gramatically
HID: wacom: Remove static WACOM_PKGLEN_MAX limit
HID: amd_sfh: Don't show wrong status for amd_sfh_hpd_info()
HID: amd_sfh: Default to HPD disabled
HID: amd_sfh: Allow configuring whether HPD is enabled or disabled
HID: pidff: Fix set_device_control()
HID: pidff: Fix 90 degrees direction name North -> East
HID: pidff: Compute INFINITE value instead of using hardcoded 0xffff
HID: pidff: Clamp effect playback LOOP_COUNT value
HID: pidff: Rename two functions to align them with naming convention
HID: lenovo: silence unreachable code warning
HID: lenovo: Fix to ensure the data as __le32 instead of u32
HID: bpf: add a v6.11+ compatible BPF fixup for the XPPen ACK05 remote
HID: bpf: new hid_bpf_async.h common header
HID: bpf: import new kfunc from v6.10 & v6.11
HID: bpf: add support for the XP-Pen Artist Pro 19 (gen2)
HID: bpf: Added updated Kamvas Pro 19 descriptor
HID: bpf: Suppress bogus F13 trigger on Sirius keyboard full fan shortcut
HID: bpf: Add support for the default firmware mode of the Huion K20
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific, little
about the core changes. Some highlights below:
Core:
- A couple of (rather minor) race fixes in ALSA sequencer code
- A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
- A large series of code conversion to use modern terminology for the
clocking configuration
- Conversions of PM ops with the modern macros in all ASoC drivers
- Clarification of the control operations
- Prepartory work for more generic SoundWire SCDA controls
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
- Conversions of PM ops with the modern macros in the rest drivers
- USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
- HD-audio quirks and fixes ASUS, HP, Lenovo, and others"
* tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (651 commits)
ALSA: hda: tas2781-i2c: Remove unnecessary NULL check before release_firmware()
ALSA: hda: cs35l56: Remove unnecessary NULL check before release_firmware()
ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA
ALSA: hda/realtek: Fix built-in mic assignment on ASUS VivoBook X515UA
ALSA: hda/realtek: Add support for various HP Laptops using CS35L41 HDA
ALSA: timer: Don't take register_mutex with copy_from/to_user()
ASoC: SDCA: Correct handling of selected mode DisCo property
ASoC: amd: yc: update quirk data for new Lenovo model
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3247
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3315
ASoC: SOF: mediatek: Commonize duplicated functions
ASoC: dmic: Fix NULL pointer dereference
ASoC: wm8904: add DMIC support
ASoC: wm8904: get platform data from DT
ASoC: dt-bindings: wm8904: Add DMIC, GPIO, MIC and EQ support
ASoC: wm8904: Don't touch GPIO configs set to 0xFFFF
of: Add of_property_read_u16_index
ALSA: oxygen: Fix dependency on CONFIG_PM_SLEEP
ASoC: ops: Apply platform_max after deciding control type
ASoC: ops: Remove some unnecessary local variables
...
|
|
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract code from dump_common_audit_data() into the audit_log_lsm_data()
helper. This helps reuse common LSM audit data while not abusing
AUDIT_AVC records because of the common_lsm_audit() helper.
Depends-on: 7ccbe076d987 ("lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set")
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: James Morris <jmorris@namei.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-2-mic@digikod.net
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
From: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
This patch series is focused on improving the compatibility and usability of the
hid-pidff force feedback driver. Last patch introduces a new, universal driver
for PID devices that need some special handling like report fixups, remapping the
button range, managing new pidff quirks and setting desirable fuzz/flat values.
This work has been done in the span of the past months with the help of the great
Linux simracing community, with a little input from sim flight fans from FFBeast.
No changes interfere with compliant and currently working PID devices.
"Generic" codepath was tested as well with Moza and Simxperience AccuForce v2.
I'm not married to the name. It's what we used previously, but if "universal" is
confusing (pidff is already the generic driver), we can come up with something
better like "hid-quirky-pidff" :)
With v8 and tiny finx in v9, all the outstanding issues were resolved,
additional pidff issues were fixed and hid-pidff defines moved to a dedicated
header file. This patch series could be considered done bar any comments and
requests from input maintainers.
I could save more then a dozen lines of code by changing simple if statements
to only occupy on line instead of two in there's a need for that.
|
|
- intel-ish Kbuild cleanup (Jiri Kosina)
|
|
- differentiate warning for reserved item tag from unknown item tag, in
accordance to 6.2.2.4 from the HID specification 1.11 (Tatsuya S)
|
|
Instead of a bool field in struct io_sr_msg, use REQ_F_IMPORT_BUFFER to
track whether io_send_zc() has already imported the buffer. This flag
already serves a similar purpose for sendmsg_zc and {read,write}v_fixed.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20250325143943.1226467-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In struct pci_epc_features, an EPC driver can already specify if they
support MSI (by setting msi_capable) and MSI-X (by setting msix_capable).
Thus, for consistency, allow an EPC driver to specify if it supports
INTx interrupts as well (by setting intx_capable).
Since this struct is zero initialized, EPC drivers that want to claim
INTx support will need to set intx_capable to true.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[kwilczynski: add missing kernel-doc for "intx_capable"]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-13-cassel@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM
pmdomain providers:
- arm: Remove redundant state verification for the SCMI PM domain
- bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP
- rockchip: Add support for regulators
- rockchip: Use SMC call to properly inform firmware
- sunxi: Add V853 ppu support
- thead: Add support for RISC-V TH1520 power-domains
firmware:
- Add support for the AON firmware protocol for RISC-V THEAD
cpuidle-psci:
- Update section in MAINTAINERS for cpuidle-psci
- Add trace support for PSCI domain-idlestates"
* tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (29 commits)
firmware: thead: add CONFIG_MAILBOX dependency
firmware: thead,th1520-aon: Fix use after free in th1520_aon_init()
pmdomain: arm: scmi_pm_domain: Remove redundant state verification
pmdomain: thead: fix TH1520_AON_PROTOCOL dependency
pmdomain: thead: Add power-domain driver for TH1520
dt-bindings: power: Add TH1520 SoC power domains
firmware: thead: Add AON firmware protocol driver
dt-bindings: firmware: thead,th1520: Add support for firmware node
pmdomain: rockchip: add regulator dependency
pmdomain: rockchip: add regulator support
pmdomain: rockchip: fix rockchip_pd_power error handling
pmdomain: rockchip: reduce indentation in rockchip_pd_power
pmdomain: rockchip: forward rockchip_do_pmu_set_power_domain errors
pmdomain: rockchip: cleanup mutex handling in rockchip_pd_power
dt-bindings: power: rockchip: add regulator support
pmdomain: rockchip: Fix build error
pmdomain: imx: gpcv2: use proper helper for property detection
MAINTAINERS: Update section for cpuidle-psci
pmdomain: rockchip: Check if SMC could be handled by TA
cpuidle: psci: Add trace for PSCI domain idle
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC host:
- atmel-mci: Convert DT bindings to json schema
- dw_mmc: Add support for the Exynos7870 variant
- dw_mmc-rockchip: Add support for the RK3562/3528 variants
- omap: Fix potential memory leak in the probe error path
- renesas_sdhi: Add support for RZ/G3E variants
- sdhci: Disable SD card clock before changing parameters
- sdhci-esdhc-imx: Add support for the i.MX94 variant
- sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants
- sdhci-omap: Disable aggressive PM for eMMC/SD-cards
- sdhci-pci-core: Wait for VDD to settle on card power off
- sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY
- sunxi-mmc: Add support for the A523 variant
MEMSTICK:
- rtsx_usb_ms: Fix potential use-after-free during remove"
* tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: core: Remove redundant null check
mmc: host: Wait for Vdd to settle on card power off
mmc: omap: Fix memory leak in mmc_omap_new_slot
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
mmc: renesas_sdhi: fix error code in renesas_sdhi_probe()
mmc: sdhci-pxav3: set NEED_RSP_BUSY capability
mmc: sdhci-omap: Disable MMC_CAP_AGGRESSIVE_PM for eMMC/SD
tty: mmc: sdio: use bool for cts and remove parentheses
dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523
dt-bindings: mmc: sunxi: Simplify compatible string listing
dt-bindings: mmc: sdhci-of-dwcmhsc: Add compatible string for RK3528
dt-bindings: mmc: rockchip-dw-mshc: Add compatible string for RK3528
mmc: renesas_sdhi: Add support for RZ/G3E SoC
dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support
dt-bindings: mmc: rockchip-dw-mshc: Add support for rk3562
dt-bindings: mmc: Add support for rk3562 eMMC
mmc: core: Trim trailing whitespace from card product names
dt-bindings: mmc: atmel,hsmci: Convert to json schema
dt-bindings: mmc: mmc-slot: Make compatible property optional
dt-bindings: mmc: fsl-imx-esdhc: Add i.MX94 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are no new drivers this time but several changes to the core
GPIO framework and various driver updates.
This release cycle, we're starting a relatively straightforward but
tedious rework of the GPIO consumer API: for historical reasons, the
gpiod_set_value() variants would return void. Not only that but the
GPIO provider interface does not even allow drivers to return a value
to GPIO core. This is because initial GPIO controllers would be MMIO
based and could not fail. We've had I2C, SPI and USB controllers for
years too but no way of indicating failures to callers.
This changes the consumer interface, adds new provider callbacks and
starts converting the drivers under drivers/gpio/ to using them. Once
this gets upstream, we'll keep on converting GPIO drivers that live
elsewhere and once there are no more users of the old callbacks, we'll
remove them and rename the new ones to the previous name. I imagine
the last step would happen in one sweeping change like what you did
for the remove_new() -> remove() renaming.
We've also addressed an issue where invalid return values from GPIO
drivers would get propagated to user-space by adding some
GPIO-core-level sanitization. Again: not a complex change but way
overdue.
Other than that: lots of driver and core refactoring, DT-bindings
changes and some other minor changes like coding style fixes or header
reordering.
GPIO core:
- add sanitization of return values of GPIO provider callbacks so
that invalid ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers
that return an integer and allow to indicate driver errors to the
GPIO core
- change the interface of all gpiod_set_value() variants to return an
integer thus becoming able to indicate failures in the underlying
layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler
interface to gpiod_set_array_value_cansleep() and use it across
several drivers treewide
- reduce the number of atomic reads of the descriptor flags in
gpiolib debugfs code
- simplify for_each_hwgpio_in_range() and
for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE
subsystem disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't
allow drivers to set it as it should only be handled by GPIO core
and start actually enforcing it in GPIO core for *all* drivers, not
only the ones implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its
device in order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the
new value setter callbacks
- convert several drivers to using automatic lock guards from
cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by()
and bits.h macros)
- refactor gpio-latch (use generic device properties, lock guards and
some local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from
GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO
devices into its own library
- use str_enable_disable(), str_high_low() and other string helpers
where applicable
- extend the gpio-mmio abstraction layer to allow calling into the
pinctrl back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list"
* tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (119 commits)
gpio: TODO: add an item to track reworking the sysfs interface
gpio: TODO: add an item to track the conversion to the new value setters
gpio: TODO: add delimiters between tasks for better readability
gpio: TODO: remove the pinctrl integration task
gpio: TODO: remove task duplication
gpio: TODO: remove the item about the new debugfs interface
gpio: da9055: use new line value setter callbacks
gpio: da9052: use new line value setter callbacks
gpio: cs5535: use new line value setter callbacks
gpio: crystalcove: use new line value setter callbacks
gpio: cros-ec: use new line value setter callbacks
gpio: creg-snps: use new line value setter callbacks
gpio: cgbc: use new line value setter callbacks
gpio: bt8xx: use new line value setter callbacks
gpio: bt8xx: use lock guards
gpio: bt8xx: allow to build the module with COMPILE_TEST=y
gpio: bd9571mwv: use new line value setter callbacks
gpio: bd71828: use new line value setter callbacks
gpio: bd71815: use new line value setter callbacks
gpio: bcm-kona: use new line value setter callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for HTU31
- Congatec Board Controller monitoring driver
- Driver for TI INA233 Current and Power Monitor
Support for additional chips or boards in existing drivers:
- pmbus/ltc2978: Add support for LT717x and LTM4673
- asus-ec-sensors: Add PRIME X670E-PRO WIFI
- k10temp: Add support for cyan skillfish
- nct6683: Add customer ID for AMD BC-250
- lm90: Add support for NCT7716, NCT7717 and NCT7718
Other notable improvements in existing drivers:
- emc2305: Add devicetree support, and use
devm_thermal_of_cooling_device_register
- acpi_power_meter: Convert to with_info API
- dell-smm: Increase the number of fans
- pmbus/core: Optimize debugfs support and use i2c_client
debugfs directory
- hwmon core: Fix the missing of 'average' word in
hwmon_power_attr_templates
- Various drivers: Use per-client debugfs entry provided by
I2C subsystem"
* tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
hwmon: emc2305: Use devm_thermal_of_cooling_device_register
hwmon: emc2305: Add OF support
dt-bindings: hwmon: Add Microchip emc2305 support
dt-bindings: hwmon: Drop stray blank line in the header
hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register
hwmon: add driver for HTU31
dt-bindings: hwmon: Add description for sensor HTU31
hwmon: Add driver for TI INA233 Current and Power Monitor
dt-bindings: hwmon: ti,ina2xx: Add INA233 device
hwmon: Add Congatec Board Controller monitoring driver
hwmon: (pmbus/ltc2978) add support for lt717x
dt-bindings: hwmon: ltc2978: add support for LT717x
hwmon: (pmbus/ltc2978) Add support for LT717x - docs
hwmon: (dell-smm) Increment the number of fans
hwmon: (ntc_thermistor) return error instead of clipping on OOB
hwmon: (pt5161l) Use per-client debugfs entry
hwmon: Fix the missing of 'average' word in hwmon_power_attr_templates
hwmon: (acpi_power_meter) Fix the fake power alarm reporting
hwmon: (gpio-fan) Add missing mutex locks
dt-bindings: hwmon: gpio-fan: Add optional regulator support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Here comes the usual mix of cleanups, new dt-bindings for existing
drivers and nexus nodes; and a new driver for the pwm subsystem.
Patches were contributed by Andy Shevchenko, Chen Wang, Chukun Pan,
Frank Li, Herve Codina, Kever Yang, and Nam Cao. Patch feedback was
provided by Andy Shevchenko, Conor Dooley, Daniel Mack, Duje
Mihanović, Heiko Stuebner, Herve Codina, Krzysztof Kozlowski, Neil
Armstrong, Rob Herring, and Zack Rusin. Thanks to all of them"
* tag 'pwm/for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
dt-bindings: pwm: imx: Add i.MX93, i.MX94 and i.MX95 support
dt-bindings: pwm: rockchip: Add rockchip,rk3528-pwm
pwm: stmpe: Allow to compile as a module
pwm: Check for CONFIG_PWM using IS_REACHABLE() in main header
dt-bindings: pwm: rockchip: Add rockchip,rk3562-pwm
pwm: Strengthen dependency for PWM_SIFIVE
pwm: clps711x: Drop of_match_ptr() usage for .of_match_table
pwm: pca9685: Drop ACPI_PTR() and of_match_ptr()
pwm: Add support for pwm nexus dt bindings
dt-bindings: pwm: Add support for PWM nexus node
pwm: Add upgrade path to #pwm-cells = <3> for users of of_pwm_single_xlate()
pwm: gpio: Switch to use hrtimer_setup()
pwm: sophgo: add driver for Sophgo SG2042 PWM
dt-bindings: pwm: sophgo: add PWM controller for SG2042
pwm: lpss: Only include <linux/pwm.h> where needed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The biggest change for SPI this release is the addition of offload
support from David Lechner, allowing the hardware to trigger SPI
transactions autonomously. The initial use case is for triggering IIO
operations but there are other applications where having the hardware
ready to go at a minimal signal is useful for synchronising with
external inputs (eg, interrupt handling) or reducing latency (eg, CAN
networking).
Otherwise there's the usual fixes, improvements and cleanups, plus
support for a bunch of new devices.
- Support for offloading support from David Lechner
- Support for GOcontrol1 Moduline modules, Mediatek MT7988, NXP
i.MX94, Qualcomm SPI NAMD, Rockchip RK3562, Sophogo SG2044 and ST
STM32 OSPI"
* tag 'spi-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
spi: spi-mem: Introduce a default ->exec_op() debug log
spi: dt-bindings: cdns,qspi-nor: Require some peripheral properties
spi: dt-bindings: cdns,qspi-nor: Deprecate the Cadence compatible alone
spi: dt-bindings: cdns,qspi-nor: Be more descriptive regarding what this controller is
spi: stm32-ospi: Include "gpio/consumer.h"
MAINTAINERS: adjust the file entry in GOCONTROLL MODULINE MODULE SLOT
spi: spi-qpic-snand: avoid memleak in qcom_spi_ecc_init_ctx_pipelined()
spi: spi-mux: Fix coverity issue, unchecked return value
spi: sophgo: fix incorrect type for ret in sg2044_spifmc_write()
spi: sg2044-nor: fix uninitialized variable in probe
spi: sg2044-nor: fix signedness bug in sg2044_spifmc_write()
spi: sg2044-nor: Convert to dev_err_probe()
spi: sg2044-nor: Fully convert to device managed resources
dt-bindings: spi: add compatibles for mt7988
spi: spidev: Add an entry for the gocontroll moduline module slot
MAINTAINERS: add maintainer for the GOcontroll Moduline module slot
dt-bindings: connector: Add the GOcontroll Moduline module slot bindings
dt-bindings: vendor-prefixes: add GOcontroll
spi: Use inclusive language
spi: cadence-qspi: Improve spi memory performance
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling.
- A rework of the handling of LDO5 on the PCA9450, this was quite
wrong in how it handled the SD_VSEL conrol and only worked for some
system designs. This includes a DTS update since there was a not
quite ABI compatible change as part of the fix
- A devres change introducing devm_kmemdup_array() was pulled in so
it could be used with some regulator conversions to that function,
this pulled in some other devres and IIO stuff that was part of the
same pull request
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed
- Support for the NXP PF9453"
* tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: axp20x: AXP717: dcdc4 doesn't have delay
regulator: dt-bindings: rtq2208: Cleanup whitespace
regulator: dt-bindings: rtq2208: Mark fixed LDO VOUT property as deprecated
regulator: rtq6752: make const read-only array fault_mask static
regulator: pf9453: add PMIC PF9453 support
regulator: dt-bindings: pca9450: Add nxp,pf9453 compatible string
regulator: pcf50633-regulator: Remove
regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5
regulator: cros-ec: use devm_kmemdup_array()
regulator: devres: use devm_kmemdup_array()
regulator: Add (devm_)of_regulator_get()
devres: Introduce devm_kmemdup_array()
iio: imu: st_lsm9ds0: Replace device.h with what is needed
driver core: Split devres APIs to device/devres.h
err.h: move IOMEM_ERR_PTR() to err.h
regulator: pca9450: Remove duplicate code in probe
regulator: ad5398: Fix incorrect power down bit mask
regulator: pca9450: Fix enable register for LDO5
regulator: pca9450: Fix control register for LDO5
Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are dominated by cpufreq updates which in turn are dominated by
updates related to boost support in the core and drivers and
amd-pstate driver optimizations.
Apart from the above, there are some cpuidle updates including a
rework of the most recent idle intervals handling in the venerable
menu governor that leads to significant improvements in some
performance benchmarks, as the governor is now more likely to predict
a shorter idle duration in some cases, and there are updates of the
core device power management code, mostly related to system suspend
and resume, that should help to avoid potential issues arising when
the drivers of devices depending on one another want to use different
optimizations.
There is also a usual collection of assorted fixes and cleanups,
including removal of some unused code.
Specifics:
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code in drivers (Viresh Kumar)
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, zuoqian)
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai)
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski)
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng)
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar)
- Make it possible to avoid enabling capacity-aware scheduling (CAS)
in the intel_pstate driver and relocate a check for out-of-band
(OOB) platform handling in it to make it detect OOB before checking
HWP availability (Rafael Wysocki)
- Fix dbs_update() to avoid inadvertent conversions of negative
integer values to unsigned int which causes CPU frequency selection
to be inaccurate in some cases when the "conservative" cpufreq
governor is in use (Jie Zhan)
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki)
- Make it possible to tell the intel_idle driver to ignore its
built-in table of idle states for the given processor, clean up the
handling of auto-demotion disabling on Baytrail and Cherrytrail
chips in it, and update its MAINTAINERS entry (David Arcari, Artem
Bityutskiy, Rafael Wysocki)
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai)
- Clean up the Energy Model handling code somewhat (Rafael Wysocki)
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing)
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba)
- Address RCU-related sparse warnings in the Energy Model code
(Rafael Wysocki)
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao)
- Unify error handling during runtime suspend and runtime resume in
the core to help drivers to implement more consistent runtime PM
error handling (Rafael Wysocki)
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki)
- Rework the handling of the "smart suspend" driver flag in the PM
core to avoid issues hat may occur when drivers using it depend on
some other drivers and clean up the related PM core code (Rafael
Wysocki, Colin Ian King)
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to
avoid situations in which some of them may not be resumed (Rafael
Wysocki)
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu)
- Suppress sleeping parent warning in device_pm_add() in the case
when new children are added under a device with the
power.direct_complete set after it has been processed by
device_resume() (Xu Yang)
- Remove needless return in three void functions related to system
wakeup (Zijun Hu)
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver)
- Remove unused helper functions related to system sleep (David Alan
Gilbert)
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson)
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven)
- Update the cpupower utility to fix lib version-ing in it and memory
leaks in error legs, remove hard-coded values, and implement CPU
physical core querying (Thomas Renninger, John B. Wyatt IV, Shuah
Khan, Yiwei Lin, Zhongqiu Han)"
* tag 'pm-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (139 commits)
PM: sleep: Fix bit masking operation
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
dt-bindings: cpufreq: cpufreq-qcom-hw: Drop redundant minItems:1
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible
cpufreq: Init cpufreq only for present CPUs
PM: sleep: Fix handling devices with direct_complete set on errors
cpuidle: Init cpuidle only for present CPUs
PM: clk: Remove unused pm_clk_remove()
PM: sleep: core: Fix indentation in dpm_wait_for_children()
PM: s2idle: Extend comment in s2idle_enter()
PM: s2idle: Drop redundant locks when entering s2idle
PM: sleep: Remove unused pm_generic_ wrappers
cpufreq: tegra186: Share policy per cluster
cpupower: Make lib versioning scheme more obvious and fix version link
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
PM: EM: Address RCU-related sparse warnings
cpupower: Implement CPU physical core querying
pm: cpupower: remove hard-coded topology depth values
pm: cpupower: Fix cmd_monitor() error legs to free cpu_topology
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the functional perspective, the most significant changes here are
the ACPI fan driver update allowing it to handle fans with
fine-grained state checking supported, but without fine-grained
control, and the ACPI button driver update making it subscribe to
system event notifications (in addition to device notifications) which
on some systems is requisite for waking up the system from sleep.
The rest is fixes and cleanups including removal of some dead code.
Specifics:
- Use the str_on_off() helper function instead of hard-coded strings
in the ACPI power resources handling code (Thorsten Blum)
- Add fan speed reporting for ACPI fans that have _FST, but otherwise
do not support the entire ACPI 4 fan interface (Joshua Grisham)
- Fix a stale comment regarding trip points in acpi_thermal_add()
that diverged from the commented code after removing _CRT
evaluation from acpi_thermal_get_trip_points() (xueqin Luo)
- Make ACPI button driver also subscribe to system events (Mario
Limonciello)
- Use the str_yes_no() helper function instead of hard-coded strings
in the ACPI backlight (video) driver (Thorsten Blum)
- Add a missing header file include to the x86 arch CPPC code (Mario
Limonciello)
- Rework the sysfs attributes implementation in the ACPI
platform-profile driver and improve the unregistration code in it
(Nathan Chancellor, Kurt Borja)
- Prevent the ACPI HED driver from being built as a module and change
its initcall level to subsys_initcall to avoid initialization
ordering issues related to it (Xiaofei Tan)
- Update a maintainer email address in the ACPI PMIC entry in
MAINTAINERS (Mika Westerberg)
- Address a GCC 15's -Wunterminated-string-initialization warning in
the core PNP subsystem code and remove some dead code from it (Kees
Cook, David Alan Gilbert)"
* tag 'acpi-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNP: Expand length of fixup id string
PNP: Remove prehistoric deadcode
ACPI: button: Install notifier for system events as well
ACPI: fan: Add fan speed reporting for fans with only _FST
ACPI: HED: Always initialize before evged
x86/ACPI: CPPC: Add missing include
ACPI: video: Use str_yes_no() helper in acpi_video_bus_add()
ACPI: platform_profile: Improve platform_profile_unregister()
ACPI: platform-profile: Fix CFI violation when accessing sysfs files
ACPI: power: Use str_on_off() helper function
ACPI: thermal: Fix stale comment regarding trip points
MAINTAINERS: Use my kernel.org address for ACPI PMIC work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Add support for running as the root partition in Hyper-V (Microsoft
Hypervisor) by exposing /dev/mshv (Nuno and various people)
- Add support for CPU offlining in Hyper-V (Hamza Mahfooz)
- Misc fixes and cleanups (Roman Kisel, Tianyu Lan, Wei Liu, Michael
Kelley, Thorsten Blum)
* tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: fix an indentation issue in mshyperv.h
x86/hyperv: Add comments about hv_vpset and var size hypercall input args
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs
hyperv: Add definitions for root partition driver to hv headers
x86: hyperv: Add mshv_handler() irq handler and setup function
Drivers: hv: Introduce per-cpu event ring tail
Drivers: hv: Export some functions for use by root partition module
acpi: numa: Export node_to_pxm()
hyperv: Introduce hv_recommend_using_aeoi()
arm64/hyperv: Add some missing functions to arm64
x86/mshyperv: Add support for extended Hyper-V features
hyperv: Log hypercall status codes as strings
x86/hyperv: Fix check of return value from snp_set_vmsa()
x86/hyperv: Add VTL mode callback for restarting the system
x86/hyperv: Add VTL mode emergency restart callback
hyperv: Remove unused union and structs
hyperv: Add CONFIG_MSHV_ROOT to gate root partition support
hyperv: Change hv_root_partition into a function
hyperv: Convert hypercall statuses to linux error codes
drivers/hv: add CPU offlining support
...
|
|
The PHY_ID_FMT defines the format specifier "%s:%02x" to form
the PHY ID string, where the maximum of the first part is defined
in MII_BUS_ID_SIZE, including NUL terminator, and the second part
is implied to be 3 as the maximum address is limited to 32, meaning
that 2 hex digits is more than enough, plus ':' (colon) delimiter.
However, some drivers, which are using PHY_ID_FMT, customise buffer
size and do that incorrectly. Introduce a new constant PHY_ID_SIZE
that makes the minimum required size explicit, so drivers are
encouraged to use it.
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250324144751.1271761-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
Fixes: d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
Fixes: 2ab640379a0a ("x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yuxin wang <wang1315768607@163.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250321112323.153741-1-david@redhat.com
Closes: https://lore.kernel.org/lkml/CABOYnLx_dnqzpCW99G81DmOr+2UzdmZMk=T3uxwNxwz+R1RAwg@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/CAJg=8jwijTP5fre8woS4JVJQ8iUA6v+iNcsOgtj9Zfpc3obDOQ@mail.gmail.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- cleanup: remove an used function
- add support for a XenServer specific virtual PCI device
- fix the handling of a sparse Xen hypervisor symbol table
- avoid warnings when building the kernel with gcc 15
- fix use of devices behind a VMD bridge when running as a Xen PV dom0
* tag 'for-linus-6.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag
PCI: vmd: Disable MSI remapping bypass under Xen
xen/pci: Do not register devices with segments >= 0x10000
xen/pciback: Remove unused pcistub_get_pci_dev
xenfs/xensyms: respect hypervisor's "next" indication
xen/mcelog: Add __nonstring annotations for unterminated strings
xen: Add support for XenServer 6.1 platform device
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
* tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (53 commits)
Bluetooth: MGMT: Add LL Privacy Setting
Bluetooth: hci_event: Fix handling of HCI_EV_LE_DIRECT_ADV_REPORT
Bluetooth: btnxpuart: Fix kernel panic during FW release
Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7
Bluetooth: btnxpuart: Add correct bootloader error codes
t blameBluetooth: btintel: Fix leading white space
Bluetooth: btintel: Add support to configure TX power
Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal
Bluetooth: btmtk: Remove the resetting step before downloading the fw
Bluetooth: SCO: add TX timestamping
Bluetooth: L2CAP: add TX timestamping
Bluetooth: ISO: add TX timestamping
Bluetooth: add support for skb TX SND/COMPLETION timestamping
net-timestamp: COMPLETION timestamp on packet tx completion
HCI: coredump: Log devcd dumps into the monitor
Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel
Bluetooth: hci_vhci: Mark Sync Flow Control as supported
Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
Bluetooth: btintel_pci: Fix build warning
Bluetooth: btintel_pcie: Trigger device coredump on hardware exception
...
====================
Link: https://patch.msgid.link/20250325192925.2497890-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add infrastructure support to EDAC in order to be able to register
memory scrubbing RAS functionality with the kernel and expose sysfs
nodes to control such scrubbing functionality.
The main use case is CXL devices which provide different scrubbers
for their built-in memories so that tools like rasdaemon can
configure and control memory scrubbing and other, more advanced RAS
functionality (Shiju Jose and Jonathan Cameron)
- Add support to ie31200_edac for client SoCs like Raptor Lake-S which
have multiple memory controllers and out-of-band ECC capability
(Qiuxu Zhuo)
- The usual round of cleanups, simplifications and fixlets
* tag 'edac_updates_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (25 commits)
MAINTAINERS: Add a secondary maintainer for bluefield_edac
EDAC/ie31200: Switch Raptor Lake-S to interrupt mode
EDAC/ie31200: Add Intel Raptor Lake-S SoCs support
EDAC/ie31200: Break up ie31200_probe1()
EDAC/ie31200: Fold the two channel loops into one loop
EDAC/ie31200: Make struct dimm_data contain decoded information
EDAC/ie31200: Make the memory controller resources configurable
EDAC/ie31200: Simplify the pci_device_id table
EDAC/ie31200: Fix the 3rd parameter name of *populate_dimm_info()
EDAC/ie31200: Fix the error path order of ie31200_init()
EDAC/ie31200: Fix the DIMM size mask for several SoCs
EDAC/ie31200: Fix the size of EDAC_MC_LAYER_CHIP_SELECT layer
EDAC/device: Fix dev_set_name() format string
EDAC/pnd2: Make read-only const array intlv static
EDAC/igen6: Constify struct res_config
EDAC/amd64: Simplify return statement in dct_ecc_enabled()
EDAC: Update memory repair control interface for memory sparing feature
EDAC: Add a memory repair control feature
EDAC: Use string choice helper functions
EDAC: Add a Error Check Scrub control feature
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- First part of the MPAM work: split the architectural part of resctrl
from the filesystem part so that ARM's MPAM varian of resource
control can be added later while sharing the user interface with x86
(James Morse)
* tag 'x86_cache_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/resctrl: Move get_{mon,ctrl}_domain_from_cpu() to live with their callers
x86/resctrl: Move get_config_index() to a header
x86/resctrl: Handle throttle_mode for SMBA resources
x86/resctrl: Move RFTYPE flags to be managed by resctrl
x86/resctrl: Make resctrl_arch_pseudo_lock_fn() take a plr
x86/resctrl: Make prefetch_disable_bits belong to the arch code
x86/resctrl: Allow an architecture to disable pseudo lock
x86/resctrl: Add resctrl_arch_ prefix to pseudo lock functions
x86/resctrl: Move mbm_cfg_mask to struct rdt_resource
x86/resctrl: Move mba_mbps_default_event init to filesystem code
x86/resctrl: Change mon_event_config_{read,write}() to be arch helpers
x86/resctrl: Add resctrl_arch_is_evt_configurable() to abstract BMEC
x86/resctrl: Move the is_mbm_*_enabled() helpers to asm/resctrl.h
x86/resctrl: Rewrite and move the for_each_*_rdt_resource() walkers
x86/resctrl: Move monitor init work to a resctrl init call
x86/resctrl: Move monitor exit work to a resctrl exit call
x86/resctrl: Add an arch helper to reset one resource
x86/resctrl: Move resctrl types to a separate header
x86/resctrl: Move rdt_find_domain() to be visible to arch and fs code
x86/resctrl: Expose resctrl fs's init function to the rest of the kernel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
|
|
The struct thermal_zone_device is already declared on line 32, so the
duplicate declaration has been removed.
Fixes: b1ae92dcfa8e ("thermal: core: Make struct thermal_zone_device definition internal")
Signed-off-by: xueqin Luo <luoxueqin@kylinos.cn>
Link: https://lore.kernel.org/r/20250206081436.51785-1-luoxueqin@kylinos.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
* for-next/smt-control:
: Support SMT control on arm64
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
|
|
'for-next/sysreg', 'for-next/misc', 'for-next/pgtable-cleanups', 'for-next/kselftest', 'for-next/uaccess-mops', 'for-next/pie-poe-cleanup', 'for-next/cputype-kryo', 'for-next/cca-dma-address', 'for-next/drop-pxd_table_bit' and 'for-next/spectre-bhb-assume-vulnerable', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf/arm_cspmu: Fix missing io.h include
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
perf/dwc_pcie: fix duplicate pci_dev devices
perf/dwc_pcie: fix some unreleased resources
perf/arm-cmn: Minor event type housekeeping
perf: arm_pmu: Move PMUv3-specific data
perf: apple_m1: Don't disable counter in m1_pmu_enable_event()
perf: arm_v7_pmu: Don't disable counter in (armv7|krait_|scorpion_)pmu_enable_event()
perf: arm_v7_pmu: Drop obvious comments for enabling/disabling counters and interrupts
perf: arm_pmuv3: Don't disable counter in armv8pmu_enable_event()
perf: arm_pmu: Don't disable counter in armpmu_add()
perf: arm_pmuv3: Call kvm_vcpu_pmu_resync_el0() before enabling counters
perf: arm_pmuv3: Add support for ARM Rainier PMU
* for-next/amuv1-avg-freq:
: Add support for AArch64 AMUv1-based average freq
arm64: Utilize for_each_cpu_wrap for reference lookup
arm64: Update AMU-based freq scale factor on entering idle
arm64: Provide an AMU-based version of arch_freq_get_on_cpu
cpufreq: Introduce an optional cpuinfo_avg_freq sysfs entry
cpufreq: Allow arch_freq_get_on_cpu to return an error
arch_topology: init capacity_freq_ref to 0
* for-next/pkey_unrestricted:
: mm/pkey: Add PKEY_UNRESTRICTED macro
selftest/powerpc/mm/pkey: fix build-break introduced by commit 00894c3fc917
selftests/powerpc: Use PKEY_UNRESTRICTED macro
selftests/mm: Use PKEY_UNRESTRICTED macro
mm/pkey: Add PKEY_UNRESTRICTED macro
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64/sysreg: Add register fields for HFGWTR2_EL2
arm64/sysreg: Add register fields for HFGRTR2_EL2
arm64/sysreg: Add register fields for HFGITR2_EL2
arm64/sysreg: Add register fields for HDFGWTR2_EL2
arm64/sysreg: Add register fields for HDFGRTR2_EL2
arm64/sysreg: Update register fields for ID_AA64MMFR0_EL1
* for-next/misc:
: Miscellaneous arm64 patches
arm64: mm: Don't use %pK through printk
arm64/fpsimd: Remove unused declaration fpsimd_kvm_prepare()
* for-next/pgtable-cleanups:
: arm64 pgtable accessors cleanup
arm64/mm: Define PTDESC_ORDER
arm64/kernel: Always use level 2 or higher for early mappings
arm64/hugetlb: Consistently use pud_sect_supported()
arm64/mm: Convert __pte_to_phys() and __phys_to_pte_val() as functions
* for-next/kselftest:
: arm64 kselftest updates
kselftest/arm64: mte: Skip the hugetlb tests if MTE not supported on such mappings
kselftest/arm64: mte: Use the correct naming for tag check modes in check_hugetlb_options.c
* for-next/uaccess-mops:
: Implement the uaccess memory copy/set using MOPS instructions
arm64: lib: Use MOPS for usercopy routines
arm64: mm: Handle PAN faults on uaccess CPY* instructions
arm64: extable: Add fixup handling for uaccess CPY* instructions
* for-next/pie-poe-cleanup:
: PIE/POE helpers cleanup
arm64/sysreg: Move POR_EL0_INIT to asm/por.h
arm64/sysreg: Rename POE_RXW to POE_RWX
arm64/sysreg: Improve PIR/POR helpers
* for-next/cputype-kryo:
: Add cputype info for some Qualcomm Kryo cores
arm64: cputype: Add comments about Qualcomm Kryo 5XX and 6XX cores
arm64: cputype: Add QCOM_CPU_PART_KRYO_3XX_GOLD
* for-next/cca-dma-address:
: Fix DMA address for devices used in realms with Arm CCA
arm64: realm: Use aliased addresses for device DMA to shared buffers
dma: Introduce generic dma_addr_*crypted helpers
dma: Fix encryption bit clearing for dma_to_phys
* for-next/drop-pxd_table_bit:
: Drop the arm64 PXD_TABLE_BIT (clean-up in preparation for 128-bit PTEs)
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
arm64/mm: Check PUD_TYPE_TABLE in pud_bad()
arm64/mm: Check PXD_TYPE_TABLE in [p4d|pgd]_bad()
arm64/mm: Clear PXX_TYPE_MASK and set PXD_TYPE_SECT in [pmd|pud]_mkhuge()
arm64/mm: Clear PXX_TYPE_MASK in mk_[pmd|pud]_sect_prot()
arm64/ptdump: Test PMD_TYPE_MASK for block mapping
KVM: arm64: ptdump: Test PMD_TYPE_MASK for block mapping
* for-next/spectre-bhb-assume-vulnerable:
: Rework Spectre BHB mitigations to not assume "safe"
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Fix a memory ordering issue in posix-timers
Posix-timer lookup is lockless and reevaluates the timer validity
under the timer lock, but the update which validates the timer is not
protected by the timer lock. That allows the store to be reordered
against the initialization stores, so that the lookup side can
observe a partially initialized timer. That's mostly a theoretical
problem, but incorrect nevertheless.
- Fix a long standing inconsistency of the coarse time getters
The coarse time getters read the base time of the current update
cycle without reading the actual hardware clock. NTP frequency
adjustment can set the base time backwards. The fine grained
interfaces compensate this by reading the clock and applying the new
conversion factor, but the coarse grained time getters use the base
time directly. That allows the user to observe time going backwards.
Cure it by always forwarding base time, when NTP changes the
frequency with an immediate step.
- Rework of posix-timer hashing
The posix-timer hash is not scalable and due to the CRIU timer
restore mechanism prone to massive contention on the global hash
bucket lock.
Replace the global hash lock with a fine grained per bucket locking
scheme to address that.
- Rework the proc/$PID/timers interface.
/proc/$PID/timers is provided for CRIU to be able to restore a timer.
The printout happens with sighand lock held and interrupts disabled.
That's not required as this can be done with RCU protection as well.
- Provide a sane mechanism for CRIU to restore a timer ID
CRIU restores timers by creating and deleting them until the kernel
internal per process ID counter reached the requested ID. That's
horribly slow for sparse timer IDs.
Provide a prctl() which allows CRIU to restore a timer with a given
ID. When enabled the ID pointer is used as input pointer to read the
requested ID from user space. When disabled, the normal allocation
scheme (next ID) is active as before. This is backwards compatible
for both kernel and user space.
- Make hrtimer_update_function() less expensive.
The sanity checks are valuable, but expensive for high frequency
usage in io/uring. Make the debug checks conditional and enable them
only when lockdep is enabled.
- Small updates, cleanups and improvements
* tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
selftests/timers: Improve skew_consistency by testing with other clockids
timekeeping: Fix possible inconsistencies in _COARSE clockids
posix-timers: Drop redundant memset() invocation
selftests/timers/posix-timers: Add a test for exact allocation mode
posix-timers: Provide a mechanism to allocate a given timer ID
posix-timers: Dont iterate /proc/$PID/timers with sighand:: Siglock held
posix-timers: Make per process list RCU safe
posix-timers: Avoid false cacheline sharing
posix-timers: Switch to jhash32()
posix-timers: Improve hash table performance
posix-timers: Make signal_struct:: Next_posix_timer_id an atomic_t
posix-timers: Make lock_timer() use guard()
posix-timers: Rework timer removal
posix-timers: Simplify lock/unlock_timer()
posix-timers: Use guards in a few places
posix-timers: Remove SLAB_PANIC from kmem cache
posix-timers: Remove a few paranoid warnings
posix-timers: Cleanup includes
posix-timers: Add cond_resched() to posix_timer_add() search loop
posix-timers: Initialise timer before adding it to the hash table
...
|
|
netdev netlink is the only reader of netdev_{,rx_}queue->napi,
and it already holds netdev->lock. Switch protection of
the writes to netdev->lock to "ops protected".
The expectation will be now that accessing queue->napi
will require netdev->lock for "ops locked" drivers, and
rtnl_lock for all other drivers.
Current "ops locked" drivers don't require any changes.
gve and netdevsim use _locked() helpers right next to
netif_queue_set_napi() so they must be holding the instance
lock. iavf doesn't call it. bnxt is a bit messy but all paths
seem locked.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250324224537.248800-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
