| Age | Commit message (Collapse) | Author |
|---|
|
Patch series "mm/debug: introduce and use VM_WARN_ON_VMG()".
We use a number of asserts, enabled only when CONFIG_DEBUG_VM is set,
during VMA merge operations to ensure state is as expected.
However, when syzkaller or the like encounters these asserts, often the
information provided by the report is insufficient to narrow down what the
problem is.
We noticed this recently in [0], where a non-repro issue resisted
debugging due to simply not having sufficient information to go on.
This series improves the situation by providing VM_WARN_ON_VMG() which
acts like VM_WARN_ON() (i.e. only actually being invoked if
CONFIG_DEBUG_VM is set), while dumping significant information about the
VMA merge state, the mm_struct describing the virtual address space, all
associated VMAs and, if CONFIG_DEBUG_VM_MAPLE_TREE is set, the associated
maple tree.
[0]:https://lore.kernel.org/all/6774c98f.050a0220.25abdd.0991.GAE@google.com/
This patch (of 2):
We use a number of asserts, enabled only when CONFIG_DEBUG_VM is set,
during VMA merge operations to ensure state is as expected.
However, when syzkaller or the like encounters these asserts, often the
information provided by the report is insufficient to narrow down what the
problem is.
This might not be so much of an issue if the reported problem is
reproducible, but if it is a rarely encountered race or some other case
which precludes a repro, it is a very big problem (see [0] for the
motivating case).
It is therefore sensible to provide a means by which we can easily and
conveniently dump a lot more information in these circumstances.
The aggregation of merge state into a single struct threaded through the
operation makes this trivial - we can simply introduce a variant on
VM_WARN_ON() which takes the VMA merge state object (vmg) and use that to
dump information.
This patch therefore introduces VM_WARN_ON_VMG() which provides this
functionality.
It additionally dumps full mm state, VMA state for each of the three VMAs
the vmg contains (prev, next, vma) and if CONFIG_DEBUG_VM_MAPLE_TREE is
enabled, dumps the maple tree from the provided VMA iterator if non-NULL.
This patch has no functional impact if CONFIG_DEBUG_VM is not set.
[0]:https://lore.kernel.org/all/6774c98f.050a0220.25abdd.0991.GAE@google.com/
Link: https://lkml.kernel.org/r/cover.1735932169.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/13b09b52d4d103ee86acaf0ae612539648ae29e0.1735932169.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As of now during link list corruption it prints about cluprit address and
its wrong value, but sometime it is not enough to catch the actual issue
point.
If it prints allocation and free path of that corrupted node, it will be a
lot easier to find and fix the issues.
Adding the same information when data mismatch is found in link list
debug data:
[ 14.243055] slab kmalloc-32 start ffff0000cda19320 data offset 32 pointer offset 8 size 32 allocated at add_to_list+0x28/0xb0
[ 14.245259] __kmalloc_cache_noprof+0x1c4/0x358
[ 14.245572] add_to_list+0x28/0xb0
...
[ 14.248632] do_el0_svc_compat+0x1c/0x34
[ 14.249018] el0_svc_compat+0x2c/0x80
[ 14.249244] Free path:
[ 14.249410] kfree+0x24c/0x2f0
[ 14.249724] do_force_corruption+0xbc/0x100
...
[ 14.252266] el0_svc_common.constprop.0+0x40/0xe0
[ 14.252540] do_el0_svc_compat+0x1c/0x34
[ 14.252763] el0_svc_compat+0x2c/0x80
[ 14.253071] ------------[ cut here ]------------
[ 14.253303] list_del corruption. next->prev should be ffff0000cda192a8, but was 6b6b6b6b6b6b6b6b. (next=ffff0000cda19348)
[ 14.254255] WARNING: CPU: 3 PID: 84 at lib/list_debug.c:65 __list_del_entry_valid_or_report+0x158/0x164
Moved prototype of mem_dump_obj() to bug.h, as mm.h can not be included in
bug.h.
Link: https://lkml.kernel.org/r/20241230101043.53773-1-maninder1.s@samsung.com
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Rohit Thapliyal <r.thapliyal@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The pte_free(), pmd_free(), __pud_free() and __p4d_free() in
asm-generic/pgalloc.h and the generic __tlb_remove_table() are basically
the same, so let's introduce pagetable_dtor_free() to deduplicate them.
In addition, the pagetable_dtor_free() in s390 does the same thing, so
let's s390 also calls generic pagetable_dtor_free().
Link: https://lkml.kernel.org/r/1663a0565aca881d1338ceb7d1db4aa9c333abd6.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The pagetable_p*_dtor() are exactly the same except for the handling of
ptlock. If we make ptlock_free() handle the case where ptdesc->ptl is
NULL and remove VM_BUG_ON_PAGE() from pmd_ptlock_free(), we can unify
pagetable_p*_dtor() into one function. Let's introduce pagetable_dtor()
to do this.
Later, pagetable_dtor() will be moved to tlb_remove_ptdesc(), so that
ptlock and page table pages can be freed together (regardless of whether
RCU is used). This prevents the use-after-free problem where the ptlock
is freed immediately but the page table pages is freed later via RCU.
Link: https://lkml.kernel.org/r/47f44fff9dc68d9d9e9a0d6c036df275f820598a.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Like other levels of page tables, add statistics for P4D level page table.
Link: https://lkml.kernel.org/r/d55fe3c286305aae84457da9e1066df99b3de125.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memory hotplug presently auto-onlines memory into a zone the kernel deems
appropriate if CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y.
The memhp_default_state boot param enables runtime config, but it's not
possible to do this at build-time.
Remove CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE, and replace it with
CONFIG_MHP_DEFAULT_ONLINE_TYPE_* choices that sync with the boot param.
Selections:
CONFIG_MHP_DEFAULT_ONLINE_TYPE_OFFLINE
=> mhp_default_online_type = "offline"
Memory will not be onlined automatically.
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO
=> mhp_default_online_type = "online"
Memory will be onlined automatically in a zone deemed.
appropriate by the kernel.
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_KERNEL
=> mhp_default_online_type = "online_kernel"
Memory will be onlined automatically.
The zone may allow kernel data (e.g. ZONE_NORMAL).
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE
=> mhp_default_online_type = "online_movable"
Memory will be onlined automatically.
The zone will be ZONE_MOVABLE.
Default to CONFIG_MHP_DEFAULT_ONLINE_TYPE_OFFLINE to match the existing
default CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=n behavior.
Existing users of CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y should use
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO.
[gourry@gourry.net: update KConfig comments]
Link: https://lkml.kernel.org/r/20241226182918.648799-1-gourry@gourry.net
Link: https://lkml.kernel.org/r/20241220210709.300066-1-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
My machine has 4 NUMA nodes, each equipped with 32GB of memory. I have
configured each NUMA node with 16GB of CMA and 16GB of in-use hugetlb
pages. The allocation of contiguous memory via cma_alloc() can fail
probabilistically.
When there are free hugetlb folios in the hugetlb pool, during the
migration of in-use hugetlb folios, new folios are allocated from the free
hugetlb pool. After the migration is completed, the old folios are
released back to the free hugetlb pool instead of being returned to the
buddy system. This can cause test_pages_isolated() check to fail,
ultimately leading to the failure of cma_alloc().
Call trace:
cma_alloc()
__alloc_contig_migrate_range() // migrate in-use hugepage
test_pages_isolated()
__test_page_isolated_in_pageblock()
PageBuddy(page) // check if the page is in buddy
To address this issue, we introduce a function named
replace_free_hugepage_folios(). This function will replace the hugepage
in the free hugepage pool with a new one and release the old one to the
buddy system. After the migration of in-use hugetlb pages is completed,
we will invoke replace_free_hugepage_folios() to ensure that these
hugepages are properly released to the buddy system. Following this step,
when test_pages_isolated() is executed for inspection, it will
successfully pass.
Additionally, when alloc_contig_range() is used to migrate multiple in-use
hugetlb pages, it can result in some in-use hugetlb pages being released
back to the free hugetlb pool and subsequently being reallocated and used
again. For example:
[huge 0] [huge 1]
To migrate huge 0, we obtain huge x from the pool. After the migration is
completed, we return the now-freed huge 0 back to the pool. When it's
time to migrate huge 1, we can simply reuse the now-freed huge 0 from the
pool. As a result, when replace_free_hugepage_folios() is executed, it
cannot release huge 0 back to the buddy system. To address this issue, we
should prevent the reuse of isolated free hugepages during the migration
process.
Link: https://lkml.kernel.org/r/1734503588-16254-1-git-send-email-yangge1116@126.com
Link: https://lkml.kernel.org/r/1736582300-11364-1-git-send-email-yangge1116@126.com
Signed-off-by: yangge <yangge1116@126.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current implementation of swap cgroup tracking is a bit complex and
fragile:
On charging path, swap_cgroup_record always records an actual memcg id,
and it depends on the caller to make sure all entries passed in must
belong to one single folio. As folios are always charged or uncharged as
a whole, and always charged and uncharged in order, swap_cgroup doesn't
need an extra lock.
On uncharging path, swap_cgroup_record always sets the record to zero.
These entries won't be charged again until uncharging is done. So there
is no extra lock needed either. Worth noting that swap cgroup clearing
may happen without folio involved, eg. exiting processes will zap its
page table without swapin.
The xchg/cmpxchg provides atomic operations and barriers to ensure no
tearing or synchronization issue of these swap cgroup records.
It works but quite error-prone. Things can be much clear and robust by
decoupling recording and clearing into two helpers. Recording takes the
actual folio being charged as argument, and clearing always set the record
to zero, and refine the debug sanity checks to better reflect their usage
Benchmark even showed a very slight improvement as it saved some
extra arguments and lookups:
make -j96 with defconfig on tmpfs in 1.5G memory cgroup using 4k folios:
Before: sys 9617.23 (stdev 37.764062)
After : sys 9541.54 (stdev 42.973976)
make -j96 with defconfig on tmpfs in 2G memory cgroup using 64k folios:
Before: sys 7358.98 (stdev 54.927593)
After : sys 7337.82 (stdev 39.398956)
Link: https://lkml.kernel.org/r/20241218114633.85196-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function is never used after commit 6b611388b626 ("memcg-v1: remove
charge move code").
Link: https://lkml.kernel.org/r/20241218114633.85196-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- There's been no major core change, just a bunch of driver related
improvements.
Amongst them the conversion to of_property_present() for
non-boolean properties, the addition of the support for Fujitsu
MB85RS128TY FRAM, a couple of improvements to the phram driver and
the usual load of misc changes.
Raw NAND changes:
- A new controller driver, from Nuvoton, has been merged
- Bastien Curutchet has contributed a series improving the Davinci
controller driver, both on the organization of the code, but also
on the performance side. The binding has also been converted to
yaml, received a new OOB layout and now supports on-die ECC engines
- The Qualcomm controller driver has been deeply cleaned to extract
some parts of the code into a shared file with the Qualcomm SPI
memory controller
- Aside from these main changes, the Cadence binding has been
converted to yaml, the brcmnand controller driver has received a
small fix, otherwise some more minor changes have also made their
way in
SPI NAND changes:
- The SPI NAND subsystem has seen a great improvement, with the
advent of DTR operations (DDR operations, which may be extended to
the address cycles). The first vendor driver to benefit from these
improvements is the Winbond driver
- A new manufacturer driver is added SkyHigh, with a new constraint
for the core, it is impossible to disable the on-die ECC engine
- A Foresee device is also now supported
SPI NOR changes:
- Several flash entries have been added: Atmel AT25SF321, Spansion
S28HL256T and S28HL02GT
- Support for vcc-supply regulators and their DT bindings has been
added
- The mx25u25635f entry has been dropped. The flash shares its ID
with mx25u25645g and both parts have an SFDP table. Removing their
entry lets them be driven by the generic SFDP-based driver"
* tag 'mtd/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (47 commits)
mtd: spinand: skyhigh: Align with recent read from cache variant changes
mtd: spinand: winbond: Add support for DTR operations
mtd: spinand: winbond: Add comment about naming
mtd: spinand: winbond: Update the *JW chip definitions
mtd: spinand: Add support for read DTR operations
mtd: spinand: Enhance the logic when picking a variant
mtd: spinand: Add an optional frequency to read from cache macros
mtd: spinand: Create distinct fast and slow read from cache variants
mtd: hyperbus: Use of_property_present() for non-boolean properties
mtd: st_spi_fsm: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
mtd: rawnand: davinci: add ROM supported OOB layout
mtd: spi-nor: sysfs: constify 'struct bin_attribute'
mtd: spi-nor: spansion: Add support for S28HL02GT
mtd: spi-nor: spansion: Add support for S28HL256T
mtd: spi-nor: extend description of size member of struct flash_info
mtd: rawnand: davinci: Reduce polling interval in NAND_OP_WAITRDY_INSTR
mtd: rawnand: qcom: Fix build issue on x86 architecture
mtd: rawnand: qcom: use FIELD_PREP and GENMASK
mtd: nand: Add qpic_common API file
mtd: rawnand: qcom: Add qcom prefix to common api
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Batch sizing of multiple BARs while memory decoding is disabled
instead of disabling/enabling decoding for each BAR individually;
this optimizes virtualized environments where toggling decoding
enable is expensive (Alex Williamson)
- Add host bridge .enable_device() and .disable_device() hooks for
bridges that need to configure things like Requester ID to StreamID
mapping when enabling devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and
.disable_device() hooks so drivers that use pci_host_common_probe()
instead of their own .probe() have a way to set the
.enable_device() callbacks (Marc Zyngier)
- Drop 'No bus range found' message so we don't complain when DTs
don't specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range
in include/linux/of_address.h (Bjorn Helgaas)
Driver binding:
- Update resource request API documentation to encourage callers to
supply a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so
callers of pci_intx() (which is sometimes managed) can explicitly
choose the one they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna,
ntb, qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always
unmanaged and pcim_intx() is always managed (Philipp Stanner)
Error handling:
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core
logging rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can
read the correct number of DWORDs from the TLP Prefix Log (Ilpo
Järvinen)
- Read TLP Prefixes in addition to the Header Log in
pcie_read_tlp_log() (Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and
Prefix Log (Ilpo Järvinen)
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor
BIOSes that don't configure it correctly (Takashi Iwai)
ASPM:
- Save parent L1 PM Substates config so when we restore it along with
an endpoint's config, the parent info isn't junk (Jian-Hong Pan)
Power management:
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because
the system can't wake up from suspend (Werner Sembach)
Endpoint framework:
- Destroy the EPC device in devm_pci_epc_destroy(), which previously
didn't call devres_release() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which
previously caused a subsequent pci_epf_add_vepf() to fail with
-EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we
don't depend on the BAR_MASK reset value being larger than the
requested BAR size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent
reads from bypassing the iATU if we reduced the BAR size (Niklas
Cassel)
- Verify address alignment when programming iATU so we don't attempt
to write bits that are read-only because of the BAR size, which
could lead to directing accesses to the wrong address (Niklas
Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from
trying to change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint
driver sets the BAR (Niklas Cassel)
Endpoint framework tests:
- Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
dma_chan_rx (Mohamed Khalfella)
- Correct the DMA MEMCPY test so it doesn't fail if the Endpoint
supports both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)
- Add pci-epf-test and pci_endpoint_test support for capabilities
(Niklas Cassel)
- Add Endpoint test for consecutive BARs (Niklas Cassel)
- Remove redundant comparison from Endpoint BAR test because a > 1MB
BAR can always be exactly covered by iterating with a 1MB buffer
(Hans Zhang)
- Move and convert PCI Endpoint tests from tools/pci to Kselftests
(Manivannan Sadhasivam)
Apple PCIe controller driver:
- Convert StreamID mapping configuration from a bus notifier to the
.enable_device() and .disable_device() callbacks (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Add Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank
Li)
- Add DT binding for optional i.MX95 Refclk and driver support to
enable it if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint
mode (Frank Li)
- Rely on dbi2 and iATU base addresses from DT via
dw_pcie_get_resources() instead of hardcoding them (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX,
IMX7D, IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since
imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead
of syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
Marvell MVEBU PCIe controller driver:
- Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)
MediaTek PCIe Gen3 controller driver:
- Use clk_bulk_prepare_enable() instead of separate
clk_bulk_prepare() and clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the
*_power_up() callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before
PHY reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo
Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is
a non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and
suspend/resume to avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
Microchip PolarFlare PCIe controller driver:
- Set up the inbound address translation based on whether the
platform allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default
and must specify 'dma-noncoherent' if needed (Conor Dooley)
Mobiveil PCIe controller driver:
- Convert mobiveil-pcie.txt to YAML and update 'interrupt-names'
and 'reg-names' (Frank Li)
Qualcomm PCIe controller driver:
- Add DT SM8550 and SM8650 optional 'global' interrupt for link
events (Neil Armstrong)
- Add DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
Mylavarapu)
- If 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
Renesas R-Car PCIe controller driver:
- Avoid passing stack buffer as resource name (King Dix)
Rockchip PCIe controller driver:
- Simplify clock and reset handling by using bulk interfaces (Anand
Moon)
- Pass typed rockchip_pcie (not void) pointer to
rockchip_pcie_disable_clocks() (Anand Moon)
- Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails
(Dan Carpenter)
Rockchip DesignWare PCIe controller driver:
- Use dll_link_up IRQ to detect Link Up and enumerate devices so
users don't have to manually rescan (Niklas Cassel)
- Tell DWC core not to wait for link up since the 'sys' interrupt is
required and detects Link Up events (Niklas Cassel)
Synopsys DesignWare PCIe controller driver:
- Don't wait for link up in DWC core if driver can detect Link Up
event (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya
chundru)
- Always stop link in dw_pcie_suspend_noirq(), which is required at
least for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending
PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program
an internal Address Translation Unit (iATU) (Frank Li)
TI DRA7xx PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Xilinx Versal CPM5
(Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
Miscellaneous:
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free()
instead of explicit kfree() cleanup (Ilpo Järvinen)
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM
ACPI hotplug driver (Thomas Weißschuh)
- Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong
Zhang)
- Correct documentation of the 'config_acs=' kernel parameter
(Akihiko Odaki)"
* tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (111 commits)
PCI: Batch BAR sizing operations
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
Documentation: Fix pci=config_acs= example
PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
PCI: Don't include 'pm_wakeup.h' directly
selftests: pci_endpoint: Migrate to Kselftest framework
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
misc: pci_endpoint_test: Fix IOCTL return value
dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
PCI: switchtec: Add Microchip PCI100X device IDs
misc: pci_endpoint_test: Remove redundant 'remainder' test
misc: pci_endpoint_test: Add consecutive BAR test
misc: pci_endpoint_test: Add support for capabilities
PCI: endpoint: pci-epf-test: Add support for capabilities
PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
PCI: dwc: Simplify config resource lookup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Sensor driver fixes
- remove dead TI wl128x FM radio driver
- Add support for the imx462 sensor at the IMX290 binding
- V4L2 pixel data transmitter and receiver documentation improvements
- Add support for MIPI Discovery and Configuration for C-PHY line
orders
- imx8-isi fixes and improvements
- stm32: dcmipp: add core support for the stm32mp25
- qcom: camss: Add sc7280 support
- Various fixes and enhancements
* tag 'media/v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (152 commits)
media: nuvoton: Fix an error check in npcm_video_ece_init()
media: dvb-usb-v2: af9035: fix ISO C90 compilation error on af9035_i2c_master_xfer
media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
media: fix secfeed undefined when filter alloc fail
media: dt-bindings: trivial white-space and example cleanup
MAINTAINERS: repair file entry in MEDIA DRIVERS FOR STM32 - CSI
media: solo6x10: Use const 'struct bin_attribute' callback
media: saa7164: Remove unused values
staging: media: imx: fix OF node leak in imx_media_add_of_subdevs()
media: platform: exynos4-is: Remove unused __is_get_frame_size
media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread
media: mmp: Bring back registration of the device
media: cec: include linux/debugfs.h and linux/seq_file.h where needed
Revert "media: qcom: camss: Restructure camss_link_entities"
media: venus: Remove unused hfi_core_ping()
media: dt-bindings: qcom-venus: Deprecate video-decoder and video-encoder where applicable
media: venus: Populate video encoder/decoder nodename entries
media: venus: Add support for static video encoder/decoder declarations
media: venus: match instance creation and destruction order
media: venus: destroy hfi session after m2m_ctx release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"A very small set of changes this kernel cycle.
Two cleanups, one switches to kmap_local_page() (from kmap_atomic())
and the other removes a bit of dead code"
* tag 'kgdb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Remove unused flags stack
kdb: use kmap_local_page()
|
|
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Introduce a new set of Hyper-V headers in include/hyperv and replace
the old hyperv-tlfs.h with the new headers (Nuno Das Neves)
- Fixes for the Hyper-V VTL mode (Roman Kisel)
- Fixes for cpu mask usage in Hyper-V code (Michael Kelley)
- Document the guest VM hibernation behaviour (Michael Kelley)
- Miscellaneous fixes and cleanups (Jacob Pan, John Starks, Naman Jain)
* tag 'hyperv-next-signed-20250123' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Documentation: hyperv: Add overview of guest VM hibernation
hyperv: Do not overlap the hvcall IO areas in hv_vtl_apicid_to_vp_id()
hyperv: Do not overlap the hvcall IO areas in get_vtl()
hyperv: Enable the hypercall output page for the VTL mode
hv_balloon: Fallback to generic_online_page() for non-HV hot added mem
Drivers: hv: vmbus: Log on missing offers if any
Drivers: hv: vmbus: Wait for boot-time offers during boot and resume
uio_hv_generic: Add a check for HV_NIC for send, receive buffers setup
iommu/hyper-v: Don't assume cpu_possible_mask is dense
Drivers: hv: Don't assume cpu_possible_mask is dense
x86/hyperv: Don't assume cpu_possible_mask is dense
hyperv: Remove the now unused hyperv-tlfs.h files
hyperv: Switch from hyperv-tlfs.h to hyperv/hvhdk.h
hyperv: Add new Hyper-V headers in include/hyperv
hyperv: Clean up unnecessary #includes
hyperv: Move hv_connection_id to hyperv-tlfs.h
|
|
kdb_restore_flags() and kdb_save_flags() were added in 2010 by
commit 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
but have remained unused.
Remove them, and their associated storage.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250112012049.319515-1-linux@treblig.org
Signed-off-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
|
|
Currently, LZ4_DISTANCE_MAX and LZ4_DECOMPRESS_INPLACE_MARGIN are
defined in the erofs subsystem for LZ4 in-place decompression, which is
somewhat unsuitable since they should belong to the LZ4 itself and
may change with future LZ4 codebase updates.
Move them to include/linux/lz4.h to match the upstream LZ4 library [1].
No logic changes.
[1] https://github.com/lz4/lz4/blob/v1.10.0/lib/lz4.h#L670
Link: https://lkml.kernel.org/r/20250114130454.1191150-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Cc; Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The bodies of __signed_type_use() and __unsigned_type_use() are much the
same size as their names - so put the bodies in the only line that expands
them.
Similarly __signed_type() is defined separately for 64bit and then used
exactly once just below.
Change the test for __signed_type from CONFIG_64BIT to one based on gcc
defined macros so that the code is valid if it gets used outside of a
kernel build.
Link: https://lkml.kernel.org/r/9386d1ebb8974fbabbed2635160c3975@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Always pass a 'type' through to __clamp_once(), pass '__auto_type' from
clamp() itself.
The expansion of __types_ok3() is reasonable so it isn't worth the added
complexity of avoiding it when a fixed type is used for all three values.
Link: https://lkml.kernel.org/r/8f69f4deac014f558bab186444bac2e8@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
At some point the definitions for clamp() got added in the middle of the
ones for min() and max(). Re-order the definitions so they are more
sensibly grouped.
Link: https://lkml.kernel.org/r/8bb285818e4846469121c8abc3dfb6e2@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use BUILD_BUG_ON_MSG(statically_true(ulo > uhi), ...) for the sanity check
of the bounds in clamp(). Gives better error coverage and one less
expansion of the arguments.
Link: https://lkml.kernel.org/r/34d53778977747f19cce2abb287bb3e6@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the test for signed values being non-negative only relies on
__builtion_constant_p() (not is_constexpr()) it can use the 'ux' variable
instead of the caller supplied expression. This means that the #define
parameters are only expanded twice. Once in the code and once quoted in
the error message.
Link: https://lkml.kernel.org/r/051afc171806425da991908ed8688a98@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
- Change three to several.
- Remove the comment about retaining constant expressions, no longer true.
- Realign to nearer 80 columns and break on major punctiation.
- Add a leading comment to the block before __signed_type() and __is_nonneg()
Otherwise the block explaining the cast is a bit 'floating'.
Reword the rest of that comment to improve readability.
Link: https://lkml.kernel.org/r/85b050c81c1d4076aeb91a6cded45fee@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "minmax.h: Cleanups and minor optimisations".
Some tidyups and minor changes to minmax.h.
This patch (of 7):
Link: https://lkml.kernel.org/r/c50365d214e04f9ba256d417c8bebbc0@AcuMS.aculab.com
Link: https://lkml.kernel.org/r/f04b2e1310244f62826267346fde0553@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- samsung: add gs101-mbox driver
- microchip: add sbi-ipc driver
- zynqmp: fix invalid __percpu annotation
- qcom: add IPQ5424 APCS compatible
- mpfs fix copy and paste bug
- th1520: Fix NULL vs IS_ERR() and a memory corruption bug
- tegra-hsp: clear mailbox before using message
* tag 'mailbox-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
riscv: export __cpuid_to_hartid_map
riscv: sbi: vendorid_list: Add Microchip Technology to the vendor list
mailbox: th1520: Fix memory corruption due to incorrect array size
mailbox: zynqmp: Remove invalid __percpu annotation in zynqmp_ipi_probe()
MAINTAINERS: add entry for Samsung Exynos mailbox driver
mailbox: add Samsung Exynos driver
dt-bindings: mailbox: add google,gs101-mbox
mailbox: qcom: Add support for IPQ5424 APCS IPC
dt-bindings: mailbox: qcom: Add IPQ5424 APCS compatible
mailbox: qcom-ipcc: Reset CLEAR_ON_RECV_RD if set from boot firmware
mailbox: add Microchip IPC support
dt-bindings: mailbox: add binding for Microchip IPC mailbox controller
mailbox: tegra-hsp: Clear mailbox before using message
mailbox: mpfs: fix copy and paste bug in probe
mailbox: th1520: Fix a NULL vs IS_ERR() bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"The main change is the addition of PCI bus support for mipi-i3c-hci.
I'm also carrying an hwmon patch as it makes use of the bitops
addition that is then mainly used by i3c drivers.
Core:
- Improve initialization of numbered I2C adapters
Drivers:
- use parity8 helper
- dw: fix possible use-after-free
- mipi-i3c-hci: add support for PCI bus host
- svc: many fixes for IBI and hotjoin"
* tag 'i3c/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Improve initialization of numbered I2C adapters
i3c: master: Fix missing 'ret' assignment in set_speed()
i3c: cdns: use parity8 helper instead of open coding it
i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
i3c: dw: use parity8 helper instead of open coding it
hwmon: (spd5118) Use generic parity calculation
bitops: add generic parity calculation for u8
i3c: mipi-i3c-hci: Add support for MIPI I3C HCI on PCI bus
i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming
i3c: fix kdoc parameter description for module_i3c_i2c_driver()
i3c: dw: Fix use-after-free in dw_i3c_master driver due to race condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the
efivarfs filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another
OS running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
* tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (23 commits)
x86/efi: skip memattr table on kexec boot
efivarfs: add variable resync after hibernation
efivarfs: abstract initial variable creation routine
efi: libstub: Use '-std=gnu11' to fix build with GCC 15
selftests/efivarfs: add concurrent update tests
selftests/efivarfs: fix tests for failed write removal
efivarfs: fix error on write to new variable leaving remnants
efivarfs: remove unused efivarfs_list
efivarfs: move variable lifetime management into the inodes
selftests/efivarfs: add check for disallowing file truncation
efivarfs: prevent setting of zero size on the inodes in the cache
efi: sysfb_efi: fix W=1 warnings when EFI is not set
efi/libstub: Use __free() helper for pool deallocations
efi/libstub: Use cleanup helpers for freeing copies of the memory map
efi/libstub: Simplify PCI I/O handle buffer traversal
efi/libstub: Refactor and clean up GOP resolution picker code
efi/libstub: Simplify GOP handling code
efi/libstub: Use C99-style for loop to traverse handle buffer
x86/efistub: Drop long obsolete UGA support
efivarfs: make variable_is_present use dcache lookup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are changes to SoC specific drivers and DT bindings that don't
have a separate subsystem tree, or that get grouped here for
simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding
support for additional SoCs in the exssting drivers, and support
for wrapped encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx
and renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the
code and adding a few interfaces to other drivers"
* tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (58 commits)
drivers/soc/litex: Use devm_register_restart_handler()
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove
soc: mediatek: mtk-devapc: Fix leaking IO map on error paths
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Fixes:
- omap: use threaded IRQ for LCD DMA
- omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
- vga16fb: fix orig_video_isVGA confusion
Updates & cleanups:
- hdmi: Remove unused hdmi_infoframe_check
- omapfb:
- Remove unused hdmi5_core_handle_irqs
- Use of_property_present() to test existence of DT property
- Use syscon_regmap_lookup_by_phandle_args
- efifb: Change the return value type to void
- lcdcfb: Use backlight helper
- udlfb: Use const 'struct bin_attribute' callback
- radeon: Use const 'struct bin_attribute' callbacks
- sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()"
* tag 'fbdev-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: lcdcfb: Use backlight helper
fbdev: vga16fb: fix orig_video_isVGA confusion
fbdev: omapfb: Use syscon_regmap_lookup_by_phandle_args
fbdev: omapfb: Use of_property_present() to test existence of DT property
fbdev: sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()
fbdev: omap: use threaded IRQ for LCD DMA
fbdev: omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
fbdev: efifb: Change the return value type to void
fbdev: omapfb: Remove unused hdmi5_core_handle_irqs
video: hdmi: Remove unused hdmi_infoframe_check
fbdev: radeon: Use const 'struct bin_attribute' callbacks
fbdev: udlfb: Use const 'struct bin_attribute' callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI
2.0
- compress-offload API extensions for ASRC support
ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual"
* tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (235 commits)
ALSA: hda: tas2781-spi: Fix bogus error handling in tas2781_hda_spi_probe()
ALSA: hda: tas2781-spi: Fix error code in tas2781_read_acpi()
ALSA: hda: tas2781-spi: Delete some dead code
ALSA: usb: fcp: Fix return code from poll ops
ALSA: usb: fcp: Fix incorrect resp->opcode retrieval
ALSA: usb: fcp: Fix meter_levels type to __le32
ALSA: hda/realtek: Enable Mute LED on HP Laptop 14s-fq1xxx
ALSA: hda: tas2781-spi: Fix -Wsometimes-uninitialized in tasdevice_spi_switch_book()
ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions
ALSA: hda: tas2781-spi: select CRC32 instead of CRC32_SARWATE
ALSA: usb: fcp: Fix hwdep read ops types
ALSA: scarlett2: Add device_setup option to use FCP driver
ALSA: FCP: Add Focusrite Control Protocol driver
ALSA: hda/tas2781: Add tas2781 hda SPI driver
ALSA: hda/realtek - Fixed headphone distorted sound on Acer Aspire A115-31 laptop
ASoC: xilinx: xlnx_spdif: Simpify using devm_clk_get_enabled()
ALSA: hda: Support for Ideapad hotkey mute LEDs
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83JX, 83MC and 83NM
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83LC
ASoC: dapm: add support for preparing streams
...
|
|
Some libraries want to ensure they are single threaded before forking,
so making the kernel's kvm huge page recovery process a vhost task of
the user process breaks those. The minijail library used by crosvm is
one such affected application.
Defer the task to after the first VM_RUN call, which occurs after the
parent process has forked all its jailed processes. This needs to happen
only once for the kvm instance, so introduce some general-purpose
infrastructure for that, too. It's similar in concept to pthread_once;
except it is actually usable, because the callback takes a parameter.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250123153543.2769928-1-kbusch@meta.com>
[Move call_once API to include/linux. - Paolo]
Cc: stable@vger.kernel.org
Fixes: d96c77bd4eeb ("KVM: x86: switch hugepage recovery thread to vhost_task")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove physical address skcipher walking
- Fix boot-up self-test race
Algorithms:
- Optimisations for x86/aes-gcm
- Optimisations for x86/aes-xts
- Remove VMAC
- Remove keywrap
Drivers:
- Remove n2
Others:
- Fixes for padata UAF
- Fix potential rhashtable deadlock by moving schedule_work outside
lock"
* tag 'v6.14-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (75 commits)
rhashtable: Fix rhashtable_try_insert test
dt-bindings: crypto: qcom,inline-crypto-engine: Document the SM8750 ICE
dt-bindings: crypto: qcom,prng: Document SM8750 RNG
dt-bindings: crypto: qcom-qce: Document the SM8750 crypto engine
crypto: asymmetric_keys - Remove unused key_being_used_for[]
padata: avoid UAF for reorder_work
padata: fix UAF in padata_reorder
padata: add pd get/put refcnt helper
crypto: skcipher - call cond_resched() directly
crypto: skcipher - optimize initializing skcipher_walk fields
crypto: skcipher - clean up initialization of skcipher_walk::flags
crypto: skcipher - fold skcipher_walk_skcipher() into skcipher_walk_virt()
crypto: skcipher - remove redundant check for SKCIPHER_WALK_SLOW
crypto: skcipher - remove redundant clamping to page size
crypto: skcipher - remove unnecessary page alignment of bounce buffer
crypto: skcipher - document skcipher_walk_done() and rename some vars
crypto: omap - switch from scatter_walk to plain offset
crypto: powerpc/p10-aes-gcm - simplify handling of linear associated data
crypto: bcm - Drop unused setting of local 'ptr' variable
crypto: hisilicon/qm - support new function communication
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for naming idlestates through DT
pmdomain providers:
- arm: Explicitly request the current state at init for the SCMI PM
domain
- mediatek: Add Airoha CPU PM Domain support for CPU frequency
scaling
- ti: Add per-device latency constraint management to the ti_sci PM
domain
cpuidle-psci:
- Enable system-wakeup through GENPD_FLAG_ACTIVE_WAKEUP"
* tag 'pmdomain-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: airoha: Fix compilation error with Clang-20 and Thumb2 mode
pmdomain: arm: scmi_pm_domain: Send an explicit request to set the current state
pmdomain: airoha: Add Airoha CPU PM Domain support
pmdomain: ti_sci: handle wake IRQs for IO daisy chain wakeups
pmdomain: ti_sci: add wakeup constraint management
pmdomain: ti_sci: add per-device latency constraint management
pmdomain: imx-gpcv2: Suppress bind attrs
pmdomain: imx8m[p]-blk-ctrl: Suppress bind attrs
pmdomain: core: Support naming idle states
dt-bindings: power: domain-idle-state: Allow idle-state-name
cpuidle: psci: Activate GENPD_FLAG_ACTIVE_WAKEUP with OSI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- PASID support for the blocked_domain
ARM-SMMU Updates:
- SMMUv2:
- Implement per-client prefetcher configuration on Qualcomm SoCs
- Support for the Adreno SMMU on Qualcomm's SDM670 SOC
- SMMUv3:
- Pretty-printing of event records
- Drop the ->domain_alloc_paging implementation in favour of
domain_alloc_paging_flags(flags==0)
- IO-PGTable:
- Generalisation of the page-table walker to enable external
walkers (e.g. for debugging unexpected page-faults from the GPU)
- Minor fix for handling concatenated PGDs at stage-2 with 16KiB
pages
- Misc:
- Clean-up device probing and replace the crufty probe-deferral
hack with a more robust implementation of
arm_smmu_get_by_fwnode()
- Device-tree binding updates for a bunch of Qualcomm platforms
Intel VT-d Updates:
- Remove domain_alloc_paging()
- Remove capability audit code
- Draining PRQ in sva unbind path when FPD bit set
- Link cache tags of same iommu unit together
AMD-Vi Updates:
- Use CMPXCHG128 to update DTE
- Cleanups of the domain_alloc_paging() path
RiscV IOMMU:
- Platform MSI support
- Shutdown support
Rockchip IOMMU:
- Add DT bindings for Rockchip RK3576
More smaller fixes and cleanups"
* tag 'iommu-updates-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (66 commits)
iommu: Use str_enable_disable-like helpers
iommu/amd: Fully decode all combinations of alloc_paging_flags
iommu/amd: Move the nid to pdom_setup_pgtable()
iommu/amd: Change amd_iommu_pgtable to use enum protection_domain_mode
iommu/amd: Remove type argument from do_iommu_domain_alloc() and related
iommu/amd: Remove dev == NULL checks
iommu/amd: Remove domain_alloc()
iommu/amd: Remove unused amd_iommu_domain_update()
iommu/riscv: Fixup compile warning
iommu/arm-smmu-v3: Add missing #include of linux/string_choices.h
iommu/arm-smmu-v3: Use str_read_write helper w/ logs
iommu/io-pgtable-arm: Add way to debug pgtable walk
iommu/io-pgtable-arm: Re-use the pgtable walk for iova_to_phys
iommu/io-pgtable-arm: Make pgtable walker more generic
iommu/arm-smmu: Add ACTLR data and support for qcom_smmu_500
iommu/arm-smmu: Introduce ACTLR custom prefetcher settings
iommu/arm-smmu: Add support for PRR bit setup
iommu/arm-smmu: Refactor qcom_smmu structure to include single pointer
iommu/arm-smmu: Re-enable context caching in smmu reset operation
iommu/vt-d: Link cache tags of same iommu unit together
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull fgraph updates from Steven Rostedt:
"Remove calltime and rettime from fgraph infrastructure
The calltime and rettime were used by the function graph tracer to
calculate the timings of functions where it traced their entry and
exit. The calltime and rettime were stored in the generic structures
that were used for the mechanisms to add an entry and exit callback.
Now that function graph infrastructure is used by other subsystems
than just the tracer, the calltime and rettime are not needed for
them. Remove the calltime and rettime from the generic fgraph
infrastructure and have the callers that require them handle them"
* tag 'ftrace-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Remove calltime and rettime from generic operations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: Cleanups using guard() and __free(): Use cleanup.h macros to
cleanup code and remove all gotos from kprobes code.
- tracing/probes: Also cleanups tracing/*probe events code with guard()
and __free(). These patches are just to simplify the parser codes.
- kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
This reduces preempt disable time to only when getting the module
refcount in check_kprobe_access_safe().
Previously it disabled preempt needlessly for other checks including
jump_label_text_reserved(), which took a long time because of the
linear search.
* tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos
tracing: Use __free() for kprobe events to cleanup
tracing: Use __free() in trace_probe for cleanup
kprobes: Remove remaining gotos
kprobes: Remove unneeded goto
kprobes: Use guard for rcu_read_lock
kprobes: Use guard() for external locks
jump_label: Define guard() for jump_label_lock
tracing/eprobe: Adopt guard() and scoped_guard()
tracing/uprobe: Adopt guard() and scoped_guard()
tracing/kprobe: Adopt guard() and scoped_guard()
kprobes: Adopt guard() and scoped_guard()
kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify pre-content notification support from Jan Kara:
"This introduces a new fsnotify event (FS_PRE_ACCESS) that gets
generated before a file contents is accessed.
The event is synchronous so if there is listener for this event, the
kernel waits for reply. On success the execution continues as usual,
on failure we propagate the error to userspace. This allows userspace
to fill in file content on demand from slow storage. The context in
which the events are generated has been picked so that we don't hold
any locks and thus there's no risk of a deadlock for the userspace
handler.
The new pre-content event is available only for users with global
CAP_SYS_ADMIN capability (similarly to other parts of fanotify
functionality) and it is an administrator responsibility to make sure
the userspace event handler doesn't do stupid stuff that can DoS the
system.
Based on your feedback from the last submission, fsnotify code has
been improved and now file->f_mode encodes whether pre-content event
needs to be generated for the file so the fast path when nobody wants
pre-content event for the file just grows the additional file->f_mode
check. As a bonus this also removes the checks whether the old
FS_ACCESS event needs to be generated from the fast path. Also the
place where the event is generated during page fault has been moved so
now filemap_fault() generates the event if and only if there is no
uptodate folio in the page cache.
Also we have dropped FS_PRE_MODIFY event as current real-world users
of the pre-content functionality don't really use it so let's start
with the minimal useful feature set"
* tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
fanotify: Fix crash in fanotify_init(2)
fs: don't block write during exec on pre-content watched files
fs: enable pre-content events on supported file systems
ext4: add pre-content fsnotify hook for DAX faults
btrfs: disable defrag on pre-content watched files
xfs: add pre-content fsnotify hook for DAX faults
fsnotify: generate pre-content permission event on page fault
mm: don't allow huge faults for files with pre content watches
fanotify: disable readahead if we have pre-content watches
fanotify: allow to set errno in FAN_DENY permission response
fanotify: report file range info with pre-content events
fanotify: introduce FAN_PRE_ACCESS permission event
fsnotify: generate pre-content permission event on truncate
fsnotify: pass optional file access range in pre-content event
fsnotify: introduce pre-content permission events
fanotify: reserve event bit of deprecated FAN_DIR_MODIFY
fanotify: rename a misnamed constant
fanotify: don't skip extra event info if no info_mode is set
fsnotify: check if file is actually being watched for pre-content events on open
fsnotify: opt-in for permission events at file open time
...
|
|
Revert commit 41a337b40e98 ("Add EXPORT macros for exporting PM
functions") because the macros added by it are still unused almost
two years after they had been introduced.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250116154354.149297-1-andriy.shevchenko@linux.intel.com
[ rjw: New changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If one of the waveform functions is called for a chip that only supports
.apply(), we want that an error code is returned and not a NULL pointer
exception.
Fixes: 6c5126c6406d ("pwm: Provide new consumer API functions for waveforms")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20250123172709.391349-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
hrtimers are migrated away from the dying CPU to any online target at
the CPUHP_AP_HRTIMERS_DYING stage in order not to delay bandwidth timers
handling tasks involved in the CPU hotplug forward progress.
However wakeups can still be performed by the outgoing CPU after
CPUHP_AP_HRTIMERS_DYING. Those can result again in bandwidth timers being
armed. Depending on several considerations (crystal ball power management
based election, earliest timer already enqueued, timer migration enabled or
not), the target may eventually be the current CPU even if offline. If that
happens, the timer is eventually ignored.
The most notable example is RCU which had to deal with each and every of
those wake-ups by deferring them to an online CPU, along with related
workarounds:
_ e787644caf76 (rcu: Defer RCU kthreads wakeup when CPU is dying)
_ 9139f93209d1 (rcu/nocb: Fix RT throttling hrtimer armed from offline CPU)
_ f7345ccc62a4 (rcu/nocb: Fix rcuog wake-up from offline softirq)
The problem isn't confined to RCU though as the stop machine kthread
(which runs CPUHP_AP_HRTIMERS_DYING) reports its completion at the end
of its work through cpu_stop_signal_done() and performs a wake up that
eventually arms the deadline server timer:
WARNING: CPU: 94 PID: 588 at kernel/time/hrtimer.c:1086 hrtimer_start_range_ns+0x289/0x2d0
CPU: 94 UID: 0 PID: 588 Comm: migration/94 Not tainted
Stopper: multi_cpu_stop+0x0/0x120 <- stop_machine_cpuslocked+0x66/0xc0
RIP: 0010:hrtimer_start_range_ns+0x289/0x2d0
Call Trace:
<TASK>
start_dl_timer
enqueue_dl_entity
dl_server_start
enqueue_task_fair
enqueue_task
ttwu_do_activate
try_to_wake_up
complete
cpu_stopper_thread
Instead of providing yet another bandaid to work around the situation, fix
it in the hrtimers infrastructure instead: always migrate away a timer to
an online target whenever it is enqueued from an offline CPU.
This will also allow to revert all the above RCU disgraceful hacks.
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Vlad Poenaru <vlad.wing@gmail.com>
Reported-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20250117232433.24027-1-frederic@kernel.org
Closes: 20241213203739.1519801-1-usamaarif642@gmail.com
|
|
- Fix potential string truncation in dw_pcie_edma_irq_verify() (Niklas
Cassel)
- Don't wait for link up in DWC core if driver can detect Link Up event
(Krishna chaitanya chundru)
- If qcom 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya chundru)
- Use dw-rockchip dll_link_up IRQ to detect Link Up and enumerate devices
so users don't have to manually rescan (Niklas Cassel)
- In dw-rockchip, the 'sys' interrupt is required and detects Link Up
events, so tell DWC core not to wait for link up (Niklas Cassel)
- Always stop link in dw_pcie_suspend_noirq(), which is required at least
for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending PME_TURN_OFF
message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add stubs for dw_pcie_suspend_noirq() dw_pcie_resume_noirq() when
CONFIG_PCIE_DW_HOST is not defined so drivers don't need #ifdefs (Bjorn
Helgaas)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add imx6 suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program an
internal Address Translation Unit (iATU) (Frank Li)
* pci/controller/dwc:
PCI: dwc: Simplify config resource lookup
of: address: Add parent_bus_addr to struct of_pci_range
PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM support
PCI: imx6: Use DWC common suspend resume method
PCI: dwc: Add dw_pcie_suspend_noirq(), dw_pcie_resume_noirq() stubs for !CONFIG_PCIE_DW_HOST
PCI: dwc: Remove LTSSM state test in dw_pcie_suspend_noirq()
PCI: dwc: Always stop link in the dw_pcie_suspend_noirq
PCI: dw-rockchip: Don't wait for link since we can detect Link Up
PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ
PCI: qcom: Update ICC and OPP values after Link Up event
PCI: qcom: Don't wait for link if we can detect Link Up
PCI: dwc: Don't wait for link up if driver can detect Link Up event
PCI: dwc: Fix potential truncation in dw_pcie_edma_irq_verify()
# Conflicts:
# drivers/pci/controller/dwc/pci-imx6.c
|
|
- Add host bridge .enable_device() and .disable_device() hooks for bridges
that need to configure things like Requester ID to StreamID mapping when
enabling devices (Frank Li)
- Add imx6 Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and .disable_device()
hooks so drivers that use pci_host_common_probe() instead of their own
.probe() have a way to set the .enable_device() callbacks (Marc Zyngier)
- Convert pcie-apple StreamID mapping configuration from a bus notifier to
the .enable_device() and .disable_device() callbacks (Marc Zyngier)
* pci/controller/iommu-map:
PCI: apple: Convert to {en,dis}able_device() callbacks
PCI: host-generic: Allow {en,dis}able_device() to be provided via pci_ecam_ops
PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
PCI: Add enable_device() and disable_device() callbacks for bridges
|
|
- Destroy the EPC device in devm_pci_epc_destroy(), which previously didn't
call devres_release() (Zijun Hu)
- Simplify pci_epc_get() with class_find_device_by_name() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which previously
caused a subsequent pci_epf_add_vepf() to fail with -EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we don't
depend on the BAR_MASK reset value being larger than the requested BAR
size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent reads
from bypassing the iATU if we reduced the BAR size (Niklas Cassel)
- Verify address alignment when programming iATU so we don't attempt to
write bits that are read-only because of the BAR size, which could lead
to directing accesses to the wrong address (Niklas Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from trying to
change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint driver
sets the BAR (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Verify that requested BAR size is a power of two
PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
PCI: artpec6: Implement dw_pcie_ep operation get_features
PCI: dwc: ep: Add 'address' alignment to 'size' check in dw_pcie_prog_ep_inbound_atu()
PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar()
PCI: dwc: ep: Write BAR_MASK before iATU registers in pci_epc_set_bar()
PCI: endpoint: Finish virtual EP removal in pci_epf_remove_vepf()
PCI: endpoint: Simplify pci_epc_get()
PCI: endpoint: Destroy the EPC device in devm_pci_epc_destroy()
PCI: endpoint: Replace magic number '6' by PCI_STD_NUM_BARS
|
|
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core logging
rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Add #defines for TLP Header/Prefix log sizes (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can read the
correct number of DWORDs from the TLP Prefix Log (Ilpo Järvinen)
- Read TLP Prefixes in addition to the Header Log in pcie_read_tlp_log()
(Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and Prefix
Log (Ilpo Järvinen)
* pci/err:
PCI: Add pcie_print_tlp_log() to print TLP Header and Prefix Log
PCI: Add TLP Prefix reading to pcie_read_tlp_log()
PCI: Store number of supported End-End TLP Prefixes
PCI: Use unsigned int i in pcie_read_tlp_log()
PCI: Use same names in pcie_read_tlp_log() prototype and definition
PCI: Add defines for TLP Header/Prefix log sizes
PCI: Move TLP Log handling to its own file
PCI: Don't expose pcie_read_tlp_log() outside PCI subsystem
|
|
init_once is called when an object doesn't come from the cache, and
hence needs initial clearing of certain members. While the whole
struct could get cleared by memset() in that case, a few of the cache
members are large enough that this may cause unnecessary overhead if
the caches used aren't large enough to satisfy the workload. For those
cases, some churn of kmalloc+kfree is to be expected.
Ensure that the 3 users that need clearing put the members they need
cleared at the start of the struct, and wrap the rest of the struct in
a struct group so the offset is known.
While at it, improve the interaction with KASAN such that when/if
KASAN writes to members inside the struct that should be retained over
caching, it won't trip over itself. For rw and net, the retaining of
the iovec over caching is disabled if KASAN is enabled. A helper will
free and clear those members in that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull AT_EXECVE_CHECK from Kees Cook:
- Implement AT_EXECVE_CHECK flag to execveat(2) (Mickaël Salaün)
- Implement EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits
(Mickaël Salaün)
- Add selftests and samples for AT_EXECVE_CHECK (Mickaël Salaün)
* tag 'AT_EXECVE_CHECK-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ima: instantiate the bprm_creds_for_exec() hook
samples/check-exec: Add an enlighten "inc" interpreter and 28 tests
selftests: ktap_helpers: Fix uninitialized variable
samples/check-exec: Add set-exec
selftests/landlock: Add tests for execveat + AT_EXECVE_CHECK
selftests/exec: Add 32 tests for AT_EXECVE_CHECK and exec securebits
security: Add EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebits
exec: Add a new AT_EXECVE_CHECK flag to execveat(2)
|
