| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Bad blocks increment is skipped if the block is already known bad
(improves user statistics relevance)
- Expose the OOB layout via debugfs
Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND
controllers, including extra features, such as chip select
and 6-byte NAND ID reading support
- Drop the s3c2410 driver
SPI NAND:
- Important SPI NAND continuous read improvements and fixes
- Add support for FudanMicro FM25S01A
- Add support for continuous reads in Gigadevice vendor driver
ECC:
- Add support for the Realtek ECC engine
SPI NOR:
- Some flashes can't perform reads or writes with start or end being
an odd number in Octal DTR mode. File systems like UBIFS can
request such reads or writes, causing the transaction to error out.
Pad the read or write transactions with extra bytes to avoid this
problem.
And the usual amount of various miscellaneous fixes"
* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
mtd: rawnand: sunxi: drop unused module alias
mtd: rawnand: stm32_fmc2: drop unused module alias
mtd: rawnand: rockchip: drop unused module alias
mtd: rawnand: pl353: drop unused module alias
mtd: rawnand: omap2: drop unused module alias
mtd: rawnand: atmel: drop unused module alias
mtd: onenand: omap2: drop unused module alias
mtd: hyperbus: hbmc-am654: drop unused module alias
mtd: jedec_probe: use struct_size() helper for cfiq allocation
mtd: cfi: use struct_size() helper for cfiq allocation
mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
mtd: rawnand: omap2: fix device leak on probe failure
mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
mtd: nand: realtek-ecc: Add Realtek external ECC engine support
dt-bindings: mtd: Add realtek,rtl9301-ecc
mtd: spinand: repeat reading in regular mode if continuous reading fails
mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
mtd: spinand: fix direct mapping creation sizes
mtd: rawnand: fsmc: Default to autodetect buswidth
mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The changes include adding poison injection support, fixing CXL access
coordinates when onlining CXL memory, and delaing the enumeration of
downstream switch ports for CXL hierarchy to ensure that the CXL link
is established at the time of enumeration to address a few issues
observed on AMD and Intel platforms.
Misc changes:
- Use str_plural() instead of open code for emitting strings.
- Use str_enabled_disabled() instead of ternary operator
- Fix emit of type resource_size_t argument for
validate_region_offset()
- Typo fixup in CXL driver-api documentation
- Rename CFMWS coherency restriction defines
- Add convention doc describe dealing with x86 low memory hole
and CXL
Poison Inject support:
- Move hpa_to_spa callback to new reoot decoder ops structure
- Define a SPA to HPA callback for interleave calculation with
XOR math
- Add support for SPA to DPA address translation with XOR
- Add locked variants of poison inject and clear functions
- Add inject and clear poison support by region offset
CXL access coordinates update fix:
- A comment update for hotplug memory callback prority defines
- Add node_update_perf_attrs() for updating perf attrs on a node
- Update cxl_access_coordinates() to use the new node update function
- Remove hmat_update_target_coordinates() and related code
CXL delayed downstream port enumeration and initialization:
- Add helper to detect top of CXL device topology and remove
open coding
- Add helper to delete single dport
- Add a cached copy of target_map to cxl_decoder
- Refactor decoder setup to reduce cxl_test burden
- Defer dport allocation for switch ports
- Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
- Adjust the mock version of devm_cxl_switch_port_decoders_setup()
due to cxl core usage
- Setup target_map for cxl_test decoder initialization
- Change SSLBIS handler to handle single dport
- Move port register setup to when first dport appears"
* tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (25 commits)
cxl: Move port register setup to when first dport appear
cxl: Change sslbis handler to only handle single dport
cxl/test: Setup target_map for cxl_test decoder initialization
cxl/test: Adjust the mock version of devm_cxl_switch_port_decoders_setup()
cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
cxl: Defer dport allocation for switch ports
cxl/test: Refactor decoder setup to reduce cxl_test burden
cxl: Add a cached copy of target_map to cxl_decoder
cxl: Add helper to delete dport
cxl: Add helper to detect top of CXL device topology
cxl: Documentation/driver-api/cxl: Describe the x86 Low Memory Hole solution
cxl/acpi: Rename CFMW coherency restrictions
Documentation/driver-api: Fix typo error in cxl
acpi/hmat: Remove now unused hmat_update_target_coordinates()
cxl, acpi/hmat: Update CXL access coordinates directly instead of through HMAT
drivers/base/node: Add a helper function node_update_perf_attrs()
mm/memory_hotplug: Update comment for hotplug memory callback priorities
cxl: Fix emit of type resource_size_t argument for validate_region_offset()
cxl/region: Add inject and clear poison by region offset
cxl/core: Add locked variants of the poison inject and clear funcs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Paul McKenney:
"Documentation updates:
- Update whatisRCU.rst and checklist.rst for recent RCU API additions
- Fix RCU documentation formatting and typos
- Replace dead Ottawa Linux Symposium links in RTFP.txt
Miscellaneous RCU updates:
- Document that rcu_barrier() hurries RCU_LAZY callbacks
- Remove redundant interrupt disabling from
rcu_preempt_deferred_qs_handler()
- Move list_for_each_rcu from list.h to rculist.h, and adjust the
include directive in kernel/cgroup/dmem.c accordingly
- Make initial set of changes to accommodate upcoming
system_percpu_wq changes
SRCU updates:
- Create an srcu_read_lock_fast_notrace() for eventual use in
tracing, including adding guards
- Document the reliance on per-CPU operations as implicit RCU readers
in __srcu_read_{,un}lock_fast()
- Document the srcu_flip() function's memory-barrier D's relationship
to SRCU-fast readers
- Remove a redundant preempt_disable() and preempt_enable() pair from
srcu_gp_start_if_needed()
Torture-test updates:
- Fix jitter.sh spin time so that it actually varies as advertised.
It is still quite coarse-grained, but at least it does now vary
- Update torture.sh help text to include the not-so-new --do-normal
parameter, which permits (for example) testing KCSAN kernels
without doing non-debug kernels
- Fix a number of false-positive diagnostics that were being
triggered by rcutorture starting before boot completed. Running
multiple near-CPU-bound rcutorture processes when there is only the
boot CPU is after all a bit excessive
- Substitute kcalloc() for kzalloc()
- Remove a redundant kfree() and NULL out kfree()ed objects"
* tag 'rcu.2025.09.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (31 commits)
rcu: WQ_UNBOUND added to sync_wq workqueue
rcu: WQ_PERCPU added to alloc_workqueue users
rcu: replace use of system_wq with system_percpu_wq
refperf: Set reader_tasks to NULL after kfree()
refperf: Remove redundant kfree() after torture_stop_kthread()
srcu/tiny: Remove preempt_disable/enable() in srcu_gp_start_if_needed()
srcu: Document srcu_flip() memory-barrier D relation to SRCU-fast
srcu: Document __srcu_read_{,un}lock_fast() implicit RCU readers
rculist: move list_for_each_rcu() to where it belongs
refscale: Use kcalloc() instead of kzalloc()
rcutorture: Use kcalloc() instead of kzalloc()
docs: rcu: Replace multiple dead OLS links in RTFP.txt
doc: Fix typo in RCU's torture.rst documentation
Documentation: RCU: Retitle toctree index
Documentation: RCU: Reduce toctree depth
Documentation: RCU: Wrap kvm-remote.sh rerun snippet in literal code block
rcu: docs: Requirements.rst: Abide by conventions of kernel documentation
doc: Add RCU guards to checklist.rst
doc: Update whatisRCU.rst for recent RCU API additions
rcutorture: Delay forward-progress testing until boot completes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull mm-init update from Mike Rapoport:
"Simplify deferred initialization of struct pages
Refactor and simplify deferred initialization of the memory map.
Beside the negative diffstat it gives 3ms (55ms vs 58ms) reduction in
the initialization of deferred pages on single node system with 64GiB
of RAM"
* tag 'memblock-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: drop for_each_free_mem_pfn_range_in_zone_from()
mm/mm_init: drop deferred_init_maxorder()
mm/mm_init: deferred_init_memmap: use a job per zone
mm/mm_init: use deferred_init_memmap_chunk() in deferred_grow_zone()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
|
|
Functionally no change. Remove the ambiguity of 'wait_for_completion'.
It helps development of the DEPT dependency tracker, but seems favorable
in any case.
Signed-off-by: Byungchul Park <byungchul@sk.com>
[wsa: reworded commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit a6ad54137af9 ("Merge branch 'guest-memfd-mmap' into HEAD")
- guest_memfd in Firecracker:
https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
- direct map removal:
https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
- mmap support:
https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
ARM:
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This
will hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then
allows a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
- Detect page table walk feature on new hardware
- Add sign extension with kernel MMIO/IOCSR emulation
- Improve in-kernel IPI emulation
- Improve in-kernel PCH-PIC emulation
- Move kvm_iocsr tracepoint out of generic code
RISC-V:
- Added SBI FWFT extension for Guest/VM with misaligned delegation
and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V
- Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
- Improve interrupt cpu for wakeup, in particular the heuristic to
decide which vCPU to deliver a floating interrupt to.
- Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
- Add #DE coverage in the fastops test (the only exception that's
guest- triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR),
Sierra Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
x86 (guest side):
- For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI
auto-mapping could map devices as WB and prevent the device drivers
from mapping their devices with UC/UC-.
- Make kvm_async_pf_task_wake() a local static helper and remove its
export.
- Use native qspinlocks when running in a VM with dedicated
vCPU=>pCPU bindings even when PV_UNHALT is unsupported.
Generic:
- Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as
__GFP_NOWARN is now included in GFP_NOWAIT.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (178 commits)
KVM: s390: Fix to clear PTE when discarding a swapped page
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
KVM: selftests: Add ex_str() to print human friendly name of exception vectors
selftests/kvm: remove stale TODO in xapic_state_test
KVM: selftests: Handle Intel Atom errata that leads to PMU event overcount
...
|
|
Pull virtio updates from Michael Tsirkin:
"Just fixes and cleanups this time around. The mapping cleanups are
preparing the ground for new features, though"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-vdpa: Drop redundant conversion to bool
vduse: Use fixed 4KB bounce pages for non-4KB page size
vduse: switch to use virtio map API instead of DMA API
vdpa: introduce map ops
vdpa: support virtio_map
virtio: introduce map ops in virtio core
virtio_ring: rename dma_handle to map_handle
virtio: introduce virtio_map container union
virtio: rename dma helpers
virtio_ring: switch to use dma_{map|unmap}_page()
virtio_ring: constify virtqueue pointer for DMA helpers
virtio_balloon: Remove redundant __GFP_NOWARN
vhost: vringh: Fix copy_to_iter return value check
vhost: vringh: Modify the return value check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Inte VT-d:
- IOMMU driver updated to the latest VT-d specification
- Don't enable PRS if PDS isn't supported
- Replace snprintf with scnprintf
- Fix legacy mode page table dump through debugfs
- Miscellaneous cleanups
- AMD-Vi:
- Support kdump boot when SNP is enabled
- Apple-DART:
- 4-level page-table support
- RISC-V IOMMU:
- ACPI support
- Small number of miscellaneous cleanups and fixes
* tag 'iommu-updates-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (22 commits)
iommu/vt-d: Disallow dirty tracking if incoherent page walk
iommu/vt-d: debugfs: Avoid dumping context command register
iommu/vt-d: Removal of Advanced Fault Logging
iommu/vt-d: PRS isn't usable if PDS isn't supported
iommu/vt-d: Remove LPIG from page group response descriptor
iommu/vt-d: Drop unused cap_super_offset()
iommu/vt-d: debugfs: Fix legacy mode page table dump logic
iommu/vt-d: Replace snprintf with scnprintf in dmar_latency_snapshot()
iommu/io-pgtable-dart: Fix off by one error in table index check
iommu/riscv: Add ACPI support
ACPI: scan: Add support for RISC-V in acpi_iommu_configure_id()
ACPI: RISC-V: Add support for RIMT
iommu/omap: Use int type to store negative error codes
iommu/apple-dart: Clear stream error indicator bits for T8110 DARTs
iommu/amd: Skip enabling command/event buffers for kdump
crypto: ccp: Skip SEV and SNP INIT for kdump boot
iommu/amd: Reuse device table for kdump
iommu/amd: Add support to remap/unmap IOMMU buffers for kdump
iommu/apple-dart: Add 4-level page table support
iommu/io-pgtable-dart: Add 4-level page table support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- Refactoring of DMA mapping API to physical addresses as the primary
interface instead of page+offset parameters
This gets much closer to Matthew Wilcox's long term wish for
struct-pageless IO to cacheable DRAM and is supporting memdesc
project which seeks to substantially transform how struct page works.
An advantage of this approach is the possibility of introducing
DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the
common paths, what in turn lets to use recently introduced
dma_iova_link() API to map PCI P2P MMIO without creating struct page
Developped by Leon Romanovsky and Jason Gunthorpe
- Minor clean-up by Petr Tesarik and Qianfeng Rong
* tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
kmsan: fix missed kmsan_handle_dma() signature conversion
mm/hmm: properly take MMIO path
mm/hmm: migrate to physical address-based DMA mapping API
dma-mapping: export new dma_*map_phys() interface
xen: swiotlb: Open code map_resource callback
dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs()
kmsan: convert kmsan_handle_dma to use physical addresses
dma-mapping: convert dma_direct_*map_page to be phys_addr_t based
iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys()
iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys
dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys
dma-debug: refactor to use physical addresses for page mapping
iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link().
dma-mapping: introduce new DMA attribute to indicate MMIO memory
swiotlb: Remove redundant __GFP_NOWARN
dma-direct: clean up the logic in __dma_direct_alloc_pages()
|
|
Now the node id only needs to be set for early memory, so move
memory_block_add_nid() into the caller and rename it into
memory_block_add_nid_early(). This allows us to further simplify the code
by dropping the 'context' argument to
do_register_memory_block_under_node().
Link: https://lkml.kernel.org/r/20250729064637.51662-4-hare@kernel.org
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The sysfs attributes for memory blocks require the node ID to be set and
initialized, so move the node activation before adding new memory blocks.
This also has the nice side effect that the BUG_ON() can be converted into
a WARN_ON() as we now can handle registration errors.
Link: https://lkml.kernel.org/r/20250729064637.51662-3-hare@kernel.org
Fixes: b9ff036082cd ("mm/memory_hotplug.c: make add_memory_resource use __try_online_node")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file->f_path constification from Al Viro:
"Only one thing was modifying ->f_path of an opened file - acct(2).
Massaging that away and constifying a bunch of struct path * arguments
in functions that might be given &file->f_path ends up with the
situation where we can turn ->f_path into an anon union of const
struct path f_path and struct path __f_path, the latter modified only
in a few places in fs/{file_table,open,namei}.c, all for struct file
instances that are yet to be opened"
* tag 'pull-f_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
Have cc(1) catch attempts to modify ->f_path
kernel/acct.c: saner struct file treatment
configfs:get_target() - release path as soon as we grab configfs_item reference
apparmor/af_unix: constify struct path * arguments
ovl_is_real_file: constify realpath argument
ovl_sync_file(): constify path argument
ovl_lower_dir(): constify path argument
ovl_get_verity_digest(): constify path argument
ovl_validate_verity(): constify {meta,data}path arguments
ovl_ensure_verity_loaded(): constify datapath argument
ksmbd_vfs_set_init_posix_acl(): constify path argument
ksmbd_vfs_inherit_posix_acl(): constify path argument
ksmbd_vfs_kern_path_unlock(): constify path argument
ksmbd_vfs_path_lookup_locked(): root_share_path can be const struct path *
check_export(): constify path argument
export_operations->open(): constify path argument
rqst_exp_get_by_name(): constify path argument
nfs: constify path argument of __vfs_getattr()
bpf...d_path(): constify path argument
done_path_create(): constify path argument
...
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add a Kconfig option to redirect dfprintk() to the trace buffer
- Enable use of the RWF_DONTCACHE flag on the NFS client
- Add striped layout handling to pNFS flexfiles
- Add proper localio handling for READ and WRITE O_DIRECT
Bugfixes:
- Handle NFS4ERR_GRACE errors during delegation recall
- Fix NFSv4.1 backchannel max_resp_sz verification check
- Fix mount hang after CREATE_SESSION failure
- Fix d_parent->d_inode locking in nfs4_setup_readdir()
Other Cleanups and Improvements:
- Improvements to write handling tracepoints
- Fix a few trivial spelling mistakes
- Cleanups to the rpcbind cleanup call sites
- Convert the SUNRPC xdr_buf to use a scratch folio instead of
scratch page
- Remove unused NFS_WBACK_BUSY() macro
- Remove __GFP_NOWARN flags
- Unexport rpc_malloc() and rpc_free()"
* tag 'nfs-for-6.18-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (46 commits)
NFS: add basic STATX_DIOALIGN and STATX_DIO_READ_ALIGN support
nfs/localio: add tracepoints for misaligned DIO READ and WRITE support
nfs/localio: add proper O_DIRECT support for READ and WRITE
nfs/localio: refactor iocb initialization
nfs/localio: refactor iocb and iov_iter_bvec initialization
nfs/localio: avoid issuing misaligned IO using O_DIRECT
nfs/localio: make trace_nfs_local_open_fh more useful
NFSD: filecache: add STATX_DIOALIGN and STATX_DIO_READ_ALIGN support
sunrpc: unexport rpc_malloc() and rpc_free()
NFSv4/flexfiles: Add support for striped layouts
NFSv4/flexfiles: Update layout stats & error paths for striped layouts
NFSv4/flexfiles: Write path updates for striped layouts
NFSv4/flexfiles: Commit path updates for striped layouts
NFSv4/flexfiles: Read path updates for striped layouts
NFSv4/flexfiles: Update low level helper functions to be DS stripe aware.
NFSv4/flexfiles: Add data structure support for striped layouts
NFSv4/flexfiles: Use ds_commit_idx when marking a write commit
NFSv4/flexfiles: Remove cred local variable dependency
nfs4_setup_readdir(): insufficient locking for ->d_parent->d_inode dereferencing
NFS: Enable use of the RWF_DONTCACHE flag on the NFS client
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This focuses on two primary updates for Android devices.
First, it sets hash-based file name lookup as the default method to
improve performance, while retaining an option to fall back to a
linear lookup.
Second, it resolves a persistent issue with the 'checkpoint=enable'
feature.
The update further boosts performance by prefetching node blocks,
merging FUA writes more efficiently, and optimizing block allocation
policies.
The release is rounded out by a comprehensive set of bug fixes that
address memory safety, data integrity, and potential system hangs,
along with minor documentation and code clean-ups.
Enhancements:
- add mount option and sysfs entry to tune the lookup mode
- dump more information and add a timeout when enabling/disabling
checkpoints
- readahead node blocks in F2FS_GET_BLOCK_PRECACHE mode
- merge FUA command with the existing writes
- allocate HOT_DATA for IPU writes
- Use allocate_section_policy to control write priority in
multi-devices setups
- add reserved nodes for privileged users
- Add bggc_io_aware to adjust the priority of BG_GC when issuing IO
- show the list of donation files
Bug fixes:
- add missing dput() when printing the donation list
- fix UAF issue in f2fs_merge_page_bio()
- add sanity check on ei.len in __update_extent_tree_range()
- fix infinite loop in __insert_extent_tree()
- fix zero-sized extent for precache extents
- fix to mitigate overhead of f2fs_zero_post_eof_page()
- fix to avoid migrating empty section
- fix to truncate first page in error path of f2fs_truncate()
- fix to update map->m_next_extent correctly in f2fs_map_blocks()
- fix wrong layout information on 16KB page
- fix to do sanity check on node footer for non inode dnode
- fix to avoid NULL pointer dereference in
f2fs_check_quota_consistency()
- fix to detect potential corrupted nid in free_nid_list
- fix to clear unusable_cap for checkpoint=enable
- fix to zero data after EOF for compressed file correctly
- fix to avoid overflow while left shift operation
- fix condition in __allow_reserved_blocks()"
* tag 'f2fs-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (43 commits)
f2fs: add missing dput() when printing the donation list
f2fs: fix UAF issue in f2fs_merge_page_bio()
f2fs: readahead node blocks in F2FS_GET_BLOCK_PRECACHE mode
f2fs: add sanity check on ei.len in __update_extent_tree_range()
f2fs: fix infinite loop in __insert_extent_tree()
f2fs: fix zero-sized extent for precache extents
f2fs: fix to mitigate overhead of f2fs_zero_post_eof_page()
f2fs: fix to avoid migrating empty section
f2fs: fix to truncate first page in error path of f2fs_truncate()
f2fs: fix to update map->m_next_extent correctly in f2fs_map_blocks()
f2fs: fix wrong layout information on 16KB page
f2fs: clean up error handing of f2fs_submit_page_read()
f2fs: avoid unnecessary folio_clear_uptodate() for cleanup
f2fs: merge FUA command with the existing writes
f2fs: allocate HOT_DATA for IPU writes
f2fs: Use allocate_section_policy to control write priority in multi-devices setups
Documentation: f2fs: Reword title
Documentation: f2fs: Indent compression_mode option list
Documentation: f2fs: Wrap snippets in literal code blocks
Documentation: f2fs: Span write hint table section rows
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- a couple of small cleanups and fixes
- implement fanotify watchdog that reports processes that fail to
respond to fanotify permission events in a given time
* tag 'fsnotify_for_v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: add watchdog for permission events
fanotify: Validate the return value of mnt_ns_from_dentry() before dereferencing
fsnotify: fix "rewriten"->"rewritten"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Extend copy_file_range interface to be fully 64bit capable (Miklos)
- Add selftest for fusectl (Chen Linxuan)
- Move fuse docs into a separate directory (Bagas Sanjaya)
- Allow fuse to enter freezable state in some cases (Sergey
Senozhatsky)
- Clean up writeback accounting after removing tmp page copies (Joanne)
- Optimize virtiofs request handling (Li RongQing)
- Add synchronous FUSE_INIT support (Miklos)
- Allow server to request prune of unused inodes (Miklos)
- Fix deadlock with AIO/sync release (Darrick)
- Add some prep patches for block/iomap support (Darrick)
- Misc fixes and cleanups
* tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (26 commits)
fuse: move CREATE_TRACE_POINTS to a separate file
fuse: move the backing file idr and code into a new source file
fuse: enable FUSE_SYNCFS for all fuseblk servers
fuse: capture the unique id of fuse commands being sent
fuse: fix livelock in synchronous file put from fuseblk workers
mm: fix lockdep issues in writeback handling
fuse: add prune notification
fuse: remove redundant calls to fuse_copy_finish() in fuse_notify()
fuse: fix possibly missing fuse_copy_finish() call in fuse_notify()
fuse: remove FUSE_NOTIFY_CODE_MAX from <uapi/linux/fuse.h>
fuse: remove fuse_readpages_end() null mapping check
fuse: fix references to fuse.rst -> fuse/fuse.rst
fuse: allow synchronous FUSE_INIT
fuse: zero initialize inode private data
fuse: remove unused 'inode' parameter in fuse_passthrough_open
virtio_fs: fix the hash table using in virtio_fs_enqueue_req()
mm: remove BDI_CAP_WRITEBACK_ACCT
fuse: use default writeback accounting
virtio_fs: Remove redundant spinlock in virtio_fs_request_complete()
fuse: remove unneeded offset assignment when filling write pages
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Amir Goldstein:
- Work by André Almeida to support case-insensitive overlayfs
Underlying case-insensitive filesystems casefolding is per directory,
but for overlayfs it is all-or-nothing. It supports layers where all
directories are casefolded (with same encoding) or layers where no
directories are casefolded.
- A fix for a "bug" in Neil's ovl directory lock changes, which only
manifested itself with casefold enabled layers which may return an
unhashed negative dentry from lookup.
* tag 'ovl-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: make sure that ovl_create_real() returns a hashed dentry
ovl: Support mounting case-insensitive enabled layers
ovl: Check for casefold consistency when creating new dentries
ovl: Add S_CASEFOLD as part of the inode flag to be copied
ovl: Set case-insensitive dentry operations for ovl sb
ovl: Ensure that all layers have the same encoding
ovl: Create ovl_casefold() to support casefolded strncmp()
ovl: Prepare for mounting case-insensitive enabled layers
fs: Create sb_same_encoding() helper
fs: Create sb_encoding() helper
|
|
Follow previous commit 9a0abc39450a ("PM: runtime: Add auto-cleanup
macros for "resume and get" operations") and define a runtime PM
usage counter guard in which pm_runtime_get_noresume() and
pm_runtime_put_noidle() will be used for incrementing and
decrementing it, respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameorn@huawei.com>
|
|
Pull d_name audit update from Al Viro:
"Simplifying ->d_name audits, easy part.
Turn dentry->d_name into an anon union of const struct qsrt (d_name
itself) and a writable alias (__d_name).
With constification of some struct qstr * arguments of functions that
get &dentry->d_name passed to them, that ends up with all
modifications provably done only in fs/dcache.c (and a fairly small
part of it).
Any new places doing modifications will be easy to find - grep for
__d_name will suffice"
* tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make it easier to catch those who try to modify ->d_name
generic_ci_validate_strict_name(): constify name argument
afs_dir_search: constify qstr argument
afs_edit_dir_{add,remove}(): constify qstr argument
exfat_find(): constify qstr argument
security_dentry_init_security(): constify qstr argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fs_context updates from Al Viro:
"Change vfs_parse_fs_string() calling conventions
Get rid of the length argument (almost all callers pass strlen() of
the string argument there), add vfs_parse_fs_qstr() for the cases that
do want separate length"
* tag 'pull-fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_nfs4_mount(): switch to vfs_parse_fs_string()
change the calling conventions for vfs_parse_fs_string()
|
|
Fix typos in doc comments.
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Link: https://patch.msgid.link/20251001105715.50462-1-bhanuseshukumar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull vfs mount updates from Al Viro:
"Several piles this cycle, this mount-related one being the largest and
trickiest:
- saner handling of guards in fs/namespace.c, getting rid of
needlessly strong locking in some of the users
- lock_mount() calling conventions change - have it set the
environment for attaching to given location, storing the results in
caller-supplied object, without altering the passed struct path.
Make unlock_mount() called as __cleanup for those objects. It's not
exactly guard(), but similar to it
- MNT_WRITE_HOLD done right.
mnt_hold_writers() does *not* mess with ->mnt_flags anymore, so
insertion of a new mount into ->s_mounts of underlying superblock
does not, in itself, expose ->mnt_flags of that mount to concurrent
modifications
- getting rid of pathological cases when umount() spends quadratic
time removing the victims from propagation graph - part of that had
been dealt with last cycle, this should finish it
- a bunch of stuff constified
- assorted cleanups
* tag 'pull-mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
constify {__,}mnt_is_readonly()
WRITE_HOLD machinery: no need for to bump mount_lock seqcount
struct mount: relocate MNT_WRITE_HOLD bit
preparations to taking MNT_WRITE_HOLD out of ->mnt_flags
setup_mnt(): primitive for connecting a mount to filesystem
simplify the callers of mnt_unhold_writers()
copy_mnt_ns(): use guards
copy_mnt_ns(): use the regular mechanism for freeing empty mnt_ns on failure
open_detached_copy(): separate creation of namespace into helper
open_detached_copy(): don't bother with mount_lock_hash()
path_has_submounts(): use guard(mount_locked_reader)
fs/namespace.c: sanitize descriptions for {__,}lookup_mnt()
ecryptfs: get rid of pointless mount references in ecryptfs dentries
umount_tree(): take all victims out of propagation graph at once
do_mount(): use __free(path_put)
do_move_mount_old(): use __free(path_put)
constify can_move_mount_beneath() arguments
path_umount(): constify struct path argument
may_copy_tree(), __do_loopback(): constify struct path argument
path_mount(): constify struct path argument
...
|
|
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs
it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics STM32MP25
in host and endpoint modes (Christian Bruel)
* pci/controller/stm32:
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings
pinctrl: Add pinctrl_pm_select_init_state helper function
Documentation: pinctrl: Describe PM helper functions for standard states.
|
|
- Ensure relaxed tail alignment does not increase min_align when computing
bridge window size, to fix a regression (Ilpo Järvinen)
- Fix bridge window size computation to fix a regression for devices with
undefined PCI class, e.g., Samsung [144d:a5a5] (Ilpo Järvinen)
- Fix error handling during resource resize to fix a regression in amdgpu
(Ilpo Järvinen)
- Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen)
- Remove several sparc pcibios_enable_device() implementations that don't
do anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use pci_enable_resources()
instead (Ilpo Järvinen)
- Refactor and simplify find_bus_resource_of_type() (Ilpo Järvinen)
- Claim bridge windows before setting them up (Ilpo Järvinen)
- Disable non-claimed bridge windows so the kernel's view matches the
hardware configuration (Ilpo Järvinen)
- Use pci_release_resource() instead of release_resource() to reduce code
duplication and increase consistency (Ilpo Järvinen)
- Enable bridges even if bridge window assignment fails (Ilpo Järvinen)
- Preserve bridge window resource type flags when assignment fails because
we may need it later (Ilpo Järvinen)
- Add bridge window selection functions to make the selection consistent
across the several places that do this (Ilpo Järvinen)
- Warn if bridge window cannot be released when resizing BAR (Ilpo
Järvinen)
- Set up bridge resources before enumerating children so we can check
whether child resources are inside bridge windows (Ilpo Järvinen)
* pci/resource:
PCI: Set up bridge resources earlier
PCI: Don't print stale information about resource
PCI: Alter misleading recursion to pci_bus_release_bridge_resources()
PCI: Pass bridge window to pci_bus_release_bridge_resources()
PCI: Add pci_setup_one_bridge_window()
PCI: Refactor remove_dev_resources() to use pbus_select_window()
PCI: Refactor distributing available memory to use loops
PCI: Use pbus_select_window_for_type() during mem window sizing
PCI: Use pbus_select_window() in space available checker
PCI: Rename resource variable from r to res
PCI: Use pbus_select_window_for_type() during IO window sizing
PCI: Use pbus_select_window() during BAR resize
PCI: Warn if bridge window cannot be released when resizing BAR
PCI: Fix finding bridge window in pci_reassign_bridge_resources()
PCI: Add bridge window selection functions
PCI: Add defines for bridge window indexing
PCI: Preserve bridge window resource type flags
PCI: Enable bridge even if bridge window fails to assign
PCI: Use pci_release_resource() instead of release_resource()
PCI: Disable non-claimed bridge window
PCI: Always claim bridge window before its setup
PCI: Refactor find_bus_resource_of_type() logic checks
PCI: Move find_bus_resource_of_type() earlier
MIPS: PCI: Use pci_enable_resources()
sparc/PCI: Remove pcibios_enable_device() as they do nothing extra
m68k/PCI: Use pci_enable_resources() in pcibios_enable_device()
PCI: Fix failure detection during resource resize
PCI: Fix pdev_resources_assignable() disparity
PCI: Ensure relaxed tail alignment does not increase min_align
|
|
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
- Make pci_has_p2pmem() static (Leon Romanovsky)
* pci/p2pdma:
PCI/P2PDMA: Reduce scope of pci_has_p2pmem()
PCI/P2PDMA: Fix incorrect pointer usage in devm_kfree() call
|
|
* Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND controllers,
including extra features, such as chip select and 6-byte NAND ID
reading support.
- Drop the s3c2410 driver.
* SPI NAND:
- Important SPI NAND continuous read improvements and fixes.
- Add support for FudanMicro FM25S01A.
- Add support for continuous reads in Gigadevice vendor driver.
* ECC:
- Add support for the Realtek ECC engine.
This PR comes with the usual amount of various miscellaneous fixes.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The commit afa3701c0e45 ("cgroup: cgroup.stat.local time accounting")
introduced a seqcount to track freeze timing but initialized it as a
plain seqcount_t using seqcount_init().
However, the write-side critical section in cgroup_do_freeze() holds
the css_set_lock spinlock while calling write_seqcount_begin(). On
PREEMPT_RT kernels, spinlocks do not disable preemption, causing the
lockdep assertion for a plain seqcount_t, which checks for preemption
being disabled, to fail.
This triggers the following warning:
WARNING: CPU: 0 PID: 9692 at include/linux/seqlock.h:221
Fix this by changing the type to seqcount_spinlock_t and initializing
it with seqcount_spinlock_init() to associate css_set_lock with the
seqcount. This allows lockdep to correctly validate that the spinlock
is held during write operations, resolving the assertion failure on all
kernel configurations.
Reported-by: syzbot+27a2519eb4dad86d0156@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=27a2519eb4dad86d0156
Fixes: afa3701c0e45 ("cgroup: cgroup.stat.local time accounting")
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://lore.kernel.org/r/20251002165510.KtY3IT--@linutronix.de/
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- A new layer for caching objects for allocation and free via percpu
arrays called sheaves.
The aim is to combine the good parts of SLAB (lower-overhead and
simpler percpu caching, compared to SLUB) without the past issues
with arrays for freeing remote NUMA node objects and their flushing.
It also allows more efficient kfree_rcu(), and cheaper object
preallocations for cases where the exact number of objects is
unknown, but an upper bound is.
Currently VMAs and maple nodes are using this new caching, with a
plan to enable it for all caches and remove the complex SLUB fastpath
based on cpu (partial) slabs and this_cpu_cmpxchg_double().
(Vlastimil Babka, with Liam Howlett and Pedro Falcato for the maple
tree changes)
- Re-entrant kmalloc_nolock(), which allows opportunistic allocations
from NMI and tracing/kprobe contexts.
Building on prior page allocator and memcg changes, it will result in
removing BPF-specific caches on top of slab (Alexei Starovoitov)
- Various fixes and cleanups. (Kuan-Wei Chiu, Matthew Wilcox, Suren
Baghdasaryan, Ye Liu)
* tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (40 commits)
slab: Introduce kmalloc_nolock() and kfree_nolock().
slab: Reuse first bit for OBJEXTS_ALLOC_FAIL
slab: Make slub local_(try)lock more precise for LOCKDEP
mm: Introduce alloc_frozen_pages_nolock()
mm: Allow GFP_ACCOUNT to be used in alloc_pages_nolock().
locking/local_lock: Introduce local_lock_is_locked().
maple_tree: Convert forking to use the sheaf interface
maple_tree: Add single node allocation support to maple state
maple_tree: Prefilled sheaf conversion and testing
tools/testing: Add support for prefilled slab sheafs
maple_tree: Replace mt_free_one() with kfree()
maple_tree: Use kfree_rcu in ma_free_rcu
testing/radix-tree/maple: Hack around kfree_rcu not existing
tools/testing: include maple-shim.c in maple.c
maple_tree: use percpu sheaves for maple_node_cache
mm, vma: use percpu sheaves for vm_area_struct cache
tools/testing: Add support for changes to slab for sheaves
slab: allow NUMA restricted allocations to use percpu sheaves
tools/testing/vma: Implement vm_refcnt reset
slab: skip percpu sheaves for remote object freeing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
|
>From commit 074a7aca7afa ("block: move stats from disk to part0"),
we know that:
* {disk|all}_stat_*() are gone.
* disk_stat_lock/unlock() are renamed to part_stat_lock/unlock().
Therefore, outdated comments should be updated accordingly.
Fixes: 074a7aca7afa ("block: move stats from disk to part0")
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Added a new V4L2 clock helper
- New camera sensor drivers
- iris: Enable H.264/H.265 encoder support and fixes in iris driver
common code
- camss: add support for new SoC flavors
- venus: add new SoC support
- tc358743: support more infoframe types
- Various fixes, driver improvements and cleanups
* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
media: venus: pm_helpers: add fallback for the opp-table
media: qcom: camss: vfe: Fix BPL alignment for QCM2290
media: tuner: xc5000: Fix use-after-free in xc5000_release
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
media: vsp1: Export missing vsp1_isp_free_buffer symbol
media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
media: renesas: ceu: Convert to RUNTIME_PM_OPS()
media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
media: uvcvideo: Shorten the transfer size non compliance message
media: uvcvideo: Do not re-reference dev->udev
media: uvcvideo: Use intf instead of udev for printks
media: uvcvideo: Move video_device under video_queue
media: uvcvideo: Drop stream->mutex
media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
...
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm in this cycle from the feature POV, but
there were lots of cleanup works in the wide-range of code for
converting with the auto-cleanup macros like guard().
The mostly user-visible changes are the support of a couple of new
compress-offload API extensions, and the support of new ASoC codec /
platform drivers as well as USB-audio quirks.
Here we go with some highlights:
Core:
- Compress-offload API extension for 64bit timestamp support
- Compress-offload API extension for OPUS codec support
- Workaround for PCM locking issue with PREEMPT_RT and softirq
- KCSAN warning fix for ALSA sequencer core
ASoC:
- Continued cleanup works for ASoC core APIs
- Lots of cleanups and conversions of DT bindings
- Substantial maintainance work on the Intel AVS drivers
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754 and TAS2783A
- Remove support for TI WL1273 for old Nokia systems
USB-audio:
- Support for Tascam US-144mkII, Presonus S1824c support
- More flexible quirk option handling
- Fix for USB MIDI timer bug triggered by fuzzer
Others:
- A large series of cleanups with guard() & co macros over (non-ASoC)
sound drivers (PCI, ISA, HD-audio, USB-audio, drivers, etc)
- TAS5825 HD-audio side-codec support"
* tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (454 commits)
ALSA: usb-audio: don't hardcode gain for output channel of Presonus Studio
ALSA: usb-audio: add the initial mix for Presonus Studio 1824c
ALSA: doc: improved docs about quirk_flags in snd-usb-audio
ALSA: usb-audio: make param quirk_flags change-able in runtime
ALSA: usb-audio: improve module param quirk_flags
ALSA: usb-audio: add two-way convert between name and bit for QUIRK_FLAG_*
ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free
ALSA: usb-audio: add mono main switch to Presonus S1824c
ALSA: compress: document 'chan_map' member in snd_dec_opus
ASoC: cs35l56: Add support for CS35L56 B2 silicon
ASoC: cs35l56: Set fw_regs table after getting REVID
ALSA: hda/realtek: Add quirk for HP Spectre 14t-ea100
ASoc: tas2783A: Fix an error code in probe()
ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007
ASoC: qcom: sc8280xp: use sa8775p/ subdir for QCS9100 / QCS9075
ASoC: stm32: sai: manage context in set_sysclk callback
ASoC: renesas: msiof: ignore 1st FSERR
ASoC: renesas: msiof: Add note for The possibility of R/L opposite Capture
ASoC: renesas: msiof: setup both (Playback/Capture) in the same time
ASoC: renesas: msiof: tidyup DMAC stop timing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Store ring provided buffers locally for the users, rather than stuff
them into struct io_kiocb.
These types of buffers must always be fully consumed or recycled in
the current context, and leaving them in struct io_kiocb is hence not
a good ideas as that struct has a vastly different life time.
Basically just an architecture cleanup that can help prevent issues
with ring provided buffers in the future.
- Support for mixed CQE sizes in the same ring.
Before this change, a CQ ring either used the default 16b CQEs, or it
was setup with 32b CQE using IORING_SETUP_CQE32. For use cases where
a few 32b CQEs were needed, this caused everything else to use big
CQEs. This is wasteful both in terms of memory usage, but also memory
bandwidth for the posted CQEs.
With IORING_SETUP_CQE_MIXED, applications may use request types that
post both normal 16b and big 32b CQEs on the same ring.
- Add helpers for async data management, to make it harder for opcode
handlers to mess it up.
- Add support for multishot for uring_cmd, which ublk can use. This
helps improve efficiency, by providing a persistent request type that
can trigger multiple CQEs.
- Add initial support for ring feature querying.
We had basic support for probe operations, but the API isn't great.
Rather than expand that, add support for QUERY which is easily
expandable and can cover a lot more cases than the existing probe
support. This will help applications get a better idea of what
operations are supported on a given host.
- zcrx improvements from Pavel:
- Improve refill entry alignment for better caching
- Various cleanups, especially around deduplicating normal
memory vs dmabuf setup.
- Generalisation of the niov size (Patch 12). It's still hard
coded to PAGE_SIZE on init, but will let the user to specify
the rx buffer length on setup.
- Syscall / synchronous bufer return. It'll be used as a slow
fallback path for returning buffers when the refill queue is
full. Useful for tolerating slight queue size misconfiguration
or with inconsistent load.
- Accounting more memory to cgroups.
- Additional independent cleanups that will also be useful for
mutli-area support.
- Various fixes and cleanups
* tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring/cmd: drop unused res2 param from io_uring_cmd_done()
io_uring: fix nvme's 32b cqes on mixed cq
io_uring/query: cap number of queries
io_uring/query: prevent infinite loops
io_uring/zcrx: account niov arrays to cgroup
io_uring/zcrx: allow synchronous buffer return
io_uring/zcrx: introduce io_parse_rqe()
io_uring/zcrx: don't adjust free cache space
io_uring/zcrx: use guards for the refill lock
io_uring/zcrx: reduce netmem scope in refill
io_uring/zcrx: protect netdev with pp_lock
io_uring/zcrx: rename dma lock
io_uring/zcrx: make niov size variable
io_uring/zcrx: set sgt for umem area
io_uring/zcrx: remove dmabuf_offset
io_uring/zcrx: deduplicate area mapping
io_uring/zcrx: pass ifq to io_zcrx_alloc_fallback()
io_uring/zcrx: check all niovs filled with dma addresses
io_uring/zcrx: move area reg checks into io_import_area
io_uring/zcrx: don't pass slot to io_zcrx_create_area
...
|
|
Pull bitmap updates from Yury Norov:
- FIELD_PREP_WM16() consolidation (Nicolas)
- bitmaps for Rust (Burak)
- __fls() fix for arc (Kees)
* tag 'bitmap-for-6.18' of https://github.com/norov/linux: (25 commits)
rust: add dynamic ID pool abstraction for bitmap
rust: add find_bit_benchmark_rust module.
rust: add bitmap API.
rust: add bindings for bitops.h
rust: add bindings for bitmap.h
phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro
clk: sp7021: switch to FIELD_PREP_WM16 macro
PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro
PCI: rockchip: Switch to FIELD_PREP_WM16* macros
net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro
ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro
drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros
phy: rockchip-usb: switch to FIELD_PREP_WM16 macro
drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro
drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro
phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro
drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro
drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros
phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro
drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nathan Chancellor:
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module
- Bump the minimum version of LLVM for building the kernel to 15.0.0
- Upgrade several userspace API checks in headers_check.pl to errors
- Unify and consolidate CONFIG_WERROR / W=e handling
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs)
- Enable -Werror unconditionally when building host programs
(hostprogs)
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS
- Miscellaneous small changes to scripts and configuration files
* tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits)
modpost: Initialize builtin_modname to stop SIGSEGVs
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o
modpost: Create modalias for builtin modules
modpost: Add modname to mod_device_table alias
scsi: Always define blogic_pci_tbl structure
kbuild: extract modules.builtin.modinfo from vmlinux.unstripped
kbuild: keep .modinfo section in vmlinux.unstripped
kbuild: always create intermediate vmlinux.unstripped
s390: vmlinux.lds.S: Reorder sections
KMSAN: Remove tautological checks
objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY
lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs
riscv: Unconditionally use linker relaxation
riscv: Remove version check for LTO_CLANG selects
powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault()
mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER
arm64: Remove tautological LLVM Kconfig conditions
ARM: Clean up definition of ARM_HAS_GROUP_RELOCS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Two small patches for the asm-generic header files: Varad Gautam
improves the MMIO tracing to be faster when the tracepoints are built
into the kernel but disabled, while Qi Xi updates the DO_ONCE logic so
that clearing the WARN_ONCE() flags does not change the other DO_ONCE
users"
* tag 'asm-generic-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
once: fix race by moving DO_ONCE to separate section
asm-generic/io.h: Skip trace helpers if rwmmio events are disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of these are cpufreq changes, which has been a recurring
pattern for a few recent cycles.
Those changes include new hardware support (AN7583 SoC support in the
airoha cpufreq driver, ipq5424 support in the qcom-nvmem cpufreq
driver, MT8196 support in the mediatek cpufreq driver, AM62D2 support
in the ti cpufreq driver), DT bindings and Rust code updates, cleanups
of the core and governors, and multiple driver fixes and cleanups.
Beyond that, there are hibernation fixes (some remaining 6.16 cycle
fallout and an issue related to hybrid suspend in the amdgpu driver),
cleanups of the PM core code, runtime PM documentation update, cpuidle
and power capping cleanups, and tooling updates.
Specifics:
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange freq
QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver to
simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas
Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq
core to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md
Sadre Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix
supported hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya
Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not
sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi
devfreq driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance
in the mtk-cci devfreq driver probe and remove a redundant
condition from an if () statement in that driver (Dan Carpenter,
Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf()
in cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle
driver and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that
funtion easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API
(Brian Norris)
- Clear power.must_resume in noirq suspend error path to avoid
resuming a dependant device under a suspended parent or supplier
(Rafael Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode
and combine exit paths in power_down() to avoid code duplication
(Rafael Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that
do bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)"
* tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
PM: runtime: Documentation: ABI: Document time units for *_time
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/power/x86/amd_pstate_tracer: Fix python gnuplot package names
cpufreq: Replace pointer subtraction with iteration macro
cpuidle: Fail cpuidle device registration if there is one already
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"New driver:
- Analog Devices I3C Controller
Subsystem:
- fix big-endian FIFO transfers
- fix default I2C adapter timeout value
Drivers:
- dw: shutdown support
- mipi-i3c-hci: Intel Wildcat Lake-U support, IOMMU support
- renesas: RZ/V2H(P) and RZ/V2N support"
* tag 'i3c/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (22 commits)
i3c: fix big-endian FIFO transfers
i3c: master: adi: fix number of bytes written to fifo
i3c: Remove superfluous FIXME
i3c: master: adi: fix header location
i3c: dw: Add shutdown support to dw_i3c_master driver
i3c: renesas: Simplify return statement in 'renesas_i3c_daa'
dt-bindings: i3c: renesas,i3c: Add RZ/V2H(P) and RZ/V2N support
i3c: master: svc: Recycle unused IBI slot
i3c: master: svc: Use manual response for IBI events
i3c: master: Add driver for Analog Devices I3C Controller IP
dt-bindings: i3c: Add adi-i3c-master
i3c: Fix default I2C adapter timeout value
i3c: mipi-i3c-hci: Convert remaining DBG() prints to dev_dbg()
i3c: mipi-i3c-hci: Remove function enter DBG() printouts
i3c: mipi-i3c-hci: Uniform ring number printouts
i3c: mipi-i3c-hci: Remove nonexistent ring interrupt
i3c: mipi-i3c-hci: Change interrupt status prints to dev_dbg()
i3c: mipi-i3c-hci: Use own DMA bounce buffer management for I2C transfers
i3c: mipi-i3c-hci: Use physical device pointer with DMA API
i3c: mipi-i3c-hci: Use core helpers for DMA mapping and bounce buffering
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Mostly DT bindings additions this time because Andi was super busy and
I also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates:
- add the compatible for Giantec GT24C256C to the device-tree
bindings"
* tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
i2c: i801: Add support for Intel Wildcat Lake-U
dt-bindings: i2c: i2c-mt65xx: Add MediaTek MT8196/6991 compatibles
i2c: designware: Add disabling clocks when probe fails
i2c: designware: Fix clock issue when PM is disabled
i2c: busses: Fix some spelling errors
i2c: mux: Simplify boolean assignment in i2c_mux_alloc
i2c: designware: use dev_err_probe() when probing platform device
i2c: designware: convert to dev_err_probe() on request IRQ error
i2c: spacemit: ensure SDA is released after bus reset
i2c: spacemit: check SDA instead of SCL after bus reset
i2c: spacemit: disable SDA glitch fix to avoid restart delay
i2c: spacemit: remove stop function to avoid bus error
i2c: spacemit: ensure bus release check runs when wait_bus_idle() fails
i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD
i2c: boardinfo: Annotate code used in init phase only
dt-bindings: i2c: i2c-mt65xx: Document MediaTek MT6878 I2C
dt-bindings: i2c: samsung,s3c2410-i2c: Drop S3C2410
i2c: s3c2410: Drop S3C2410 OF support
dt-bindings: i2c: spacemit,k1-i2c: Minor whitespace cleanup in example
dt-bindings: i2c: exynos5: add samsung,exynos8890-hsi2c compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
|
|
Pull IPMI updates from Corey Minyard:
"Bug fixes and enhancements for IPMI
This fixes a number of small bugs, but has some more major changes:
- Loongson-2K BMC support is added. This is an MFD device and is
dependent on the changes coming from that tree.
The way the driver handles BMCs that have become non-functional has
been completely redone. A number of changes in the past have
attempted to handle various issues around this, but nothing has
been very good. After working with some people on this, the code
has been reworked to disable the driver and fail all pending
operations if the BMC becomes non functional. It will retry the BMC
once a second to see if it's back up"
* tag 'for-linus-6.18-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Add Loongson-2K BMC support
ipmi:si: Gracefully handle if the BMC is non-functional
ipmi: Rename "user_data" to "recv_msg" in an SMI message
ipmi: Allow an SMI sender to return an error
ipmi:si: Move flags get start to its own function
ipmi:si: Merge some if statements
ipmi: Set a timer for maintenance mode
ipmi: Add a maintenance mode sysfs file
ipmi: Disable sysfs access and requests in maintenance mode
ipmi: Differentiate between reset and firmware update in maintenance
dt-bindings: ipmi: aspeed,ast2400-kcs-bmc: Add missing "clocks" property
ipmi: Rework user message limit handling
Revert "ipmi: fix msg stack when IPMI is disconnected"
ipmi:msghandler:Change seq_lock to a mutex
|
