| Age | Commit message (Collapse) | Author |
|---|
|
Reduce SDW1 to 4 channels and remove the controls for SDW1
TX5 and TX6.
The TX5 and TX6 channels have been removed from B0 silicon.
There is no need to support them on A1 silicon.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is unused and should not be used. In order to avoid limitations in
4-address mode, the driver should always use ieee80211_tx_status_ext for
802.3 frames with a valid sta pointer.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230417133751.79160-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add netif_subqueue_completed_wake, complementing the subqueue versions
netif_subqueue_try_stop and netif_subqueue_maybe_stop.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
catch-all set element might jump/goto to chain that uses expressions
that require validation.
Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit cited in "fixes" tag added bulk support for flow counters but it
didn't account that's also possible to query a counter using a non-base id
if the counter was allocated as bulk.
When a user performs a query, validate the flow counter id given in the
mailbox is inside the valid range taking bulk value into account.
Fixes: 208d70f562e5 ("IB/mlx5: Support flow counters offset for bulk counters")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/79d7fbe291690128e44672418934256254d93115.1681377114.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In order to not transmit (preemptible) frames which will be received by
the link partner as corrupted (because it doesn't support FP), the
hardware requires the driver to program the QSYS_PREEMPTION_CFG_P_QUEUES
register only after the MAC Merge layer becomes active (verification
succeeds, or was disabled).
There are some cases when FP is known (through experimentation) to be
broken. Give priority to FP over cut-through switching, and disable FP
for known broken link modes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This doesn't apply anything to hardware and in general doesn't do
anything that the software variant doesn't do, except for checking that
there isn't more than 1 TXQ per TC (TXQs for a DSA switch are a dubious
concept anyway). The reason we add this is to be able to parse one more
field added to struct tc_mqprio_qopt_offload, namely preemptible_tcs.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MAC Merge IRQ of all ports is shared with the PTP TX timestamp IRQ
of all ports, which means that currently, when a PTP TX timestamp is
generated, felix_irq_handler() also polls for the MAC Merge layer status
of all ports, looking for changes. This makes the kernel do more work,
and under certain circumstances may make ptp4l require a
tx_timestamp_timeout argument higher than before.
Changes to the MAC Merge layer status are only to be expected under
certain conditions - its TX direction needs to be enabled - so we can
check early if that is the case, and omit register access otherwise.
Make ocelot_mm_update_port_status() skip register access if
mm->tx_enabled is unset, and also call it once more, outside IRQ
context, from ocelot_port_set_mm(), when mm->tx_enabled transitions from
true to false, because an IRQ is also expected in that case.
Also, a port may have its MAC Merge layer enabled but it may not have
generated the interrupt. In that case, there's no point in writing to
DEV_MM_STATUS to acknowledge that IRQ. We can reduce the number of
register writes per port with MM enabled by keeping an "ack" variable
which writes the "write-one-to-clear" bits. Those are 3 in number:
PRMPT_ACTIVE_STICKY, UNEXP_RX_PFRM_STICKY and UNEXP_TX_PFRM_STICKY.
The other fields in DEV_MM_STATUS are read-only and it doesn't matter
what is written to them, so writing zero is just fine.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unfortunately, the workarounds for the hardware bugs make it pointless
to keep fine-grained locking for the MAC Merge state of each port.
Our vsc9959_cut_through_fwd() implementation requires
ocelot->fwd_domain_lock to be held, in order to serialize with changes
to the bridging domains and to port speed changes (which affect which
ports can be cut-through). Simultaneously, the traffic classes which can
be cut-through cannot be preemptible at the same time, and this will
depend on the MAC Merge layer state (which changes from threaded
interrupt context).
Since vsc9959_cut_through_fwd() would have to hold the mm->lock of all
ports for a correct and race-free implementation with respect to
ocelot_mm_irq(), in practice it means that any time a port's mm->lock is
held, it would potentially block holders of ocelot->fwd_domain_lock.
In the interest of simple locking rules, make all MAC Merge layer state
changes (and preemptible traffic class changes) be serialized by the
ocelot->fwd_domain_lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the switch emits an IRQ, we don't know what caused it, and we
iterate through all ports to check the MAC Merge status.
Move that iteration inside the ocelot lib; we will change the locking in
a future change and it would be good to encapsulate that lock completely
within the ocelot lib.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend packet reformat types and flow table capabilities with
IPsec packet offload tunnel bits.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are some use-cases where it is desirable to use bpf_redirect()
in combination with ifb device, which currently is not supported, for
example, around filtering inbound traffic with BPF to then push it to
ifb which holds the qdisc for shaping in contrast to doing that on the
egress device.
Toke mentions the following case related to OpenWrt:
Because there's not always a single egress on the other side. These are
mainly home routers, which tend to have one or more WiFi devices bridged
to one or more ethernet ports on the LAN side, and a single upstream WAN
port. And the objective is to control the total amount of traffic going
over the WAN link (in both directions), to deal with bufferbloat in the
ISP network (which is sadly still all too prevalent).
In this setup, the traffic can be split arbitrarily between the links
on the LAN side, and the only "single bottleneck" is the WAN link. So we
install both egress and ingress shapers on this, configured to something
like 95-98% of the true link bandwidth, thus moving the queues into the
qdisc layer in the router. It's usually necessary to set the ingress
bandwidth shaper a bit lower than the egress due to being "downstream"
of the bottleneck link, but it does work surprisingly well.
We usually use something like a matchall filter to put all ingress
traffic on the ifb, so doing the redirect from BPF has not been an
immediate requirement thus far. However, it does seem a bit odd that
this is not possible, and we do have a BPF-based filter that layers on
top of this kind of setup, which currently uses u32 as the ingress
filter and so it could presumably be improved to use BPF instead if
that was available.
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://git.openwrt.org/?p=project/qosify.git;a=blob;f=README
Link: https://lore.kernel.org/bpf/875y9yzbuy.fsf@toke.dk
Link: https://lore.kernel.org/r/8cebc8b2b6e967e10cbafe2ffd6795050e74accd.1681739137.git.daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When copying CPUs from a Linux cpumask to a Hyper-V VPset,
cpumask_to_vpset() currently has a "_noself" variant that doesn't copy
the current CPU to the VPset. Generalize this variant by replacing it
with a "_skip" variant having a callback function that is invoked for
each CPU to decide if that CPU should be copied. Update the one caller
of cpumask_to_vpset_noself() to use the new "_skip" variant instead.
No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679922967-26582-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
For PCI pass-thru devices in a Confidential VM, Hyper-V requires
that PCI config space be accessed via hypercalls. In normal VMs,
config space accesses are trapped to the Hyper-V host and emulated.
But in a confidential VM, the host can't access guest memory to
decode the instruction for emulation, so an explicit hypercall must
be used.
Add functions to make the new MMIO read and MMIO write hypercalls.
Update the PCI config space access functions to use the hypercalls
when such use is indicated by Hyper-V flags. Also, set the flag to
allow the Hyper-V PCI driver to be loaded and used in a Confidential
VM (a.k.a., "Isolation VM"). The driver has previously been hardened
against a malicious Hyper-V host[1].
[1] https://lore.kernel.org/all/20220511223207.3386-2-parri.andrea@gmail.com/
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-13-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
With changes to how Hyper-V guest VMs flip memory between private
(encrypted) and shared (decrypted), creating a second kernel virtual
mapping for shared memory is no longer necessary. Everything needed
for the transition to shared is handled by set_memory_decrypted().
As such, remove the code to create and manage the second
mapping for the pre-allocated send and recv buffers. This mapping
is the last user of hv_map_memory()/hv_unmap_memory(), so delete
these functions as well. Finally, hv_map_memory() is the last
user of vmap_pfn() in Hyper-V guest code, so remove the Kconfig
selection of VMAP_PFN.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-11-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
With changes to how Hyper-V guest VMs flip memory between private
(encrypted) and shared (decrypted), creating a second kernel virtual
mapping for shared memory is no longer necessary. Everything needed
for the transition to shared is handled by set_memory_decrypted().
As such, remove swiotlb_unencrypted_base and the associated
code.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/1679838727-87310-8-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Merge the following 6 patches from tip/x86/sev, which are taken from
Michael Kelley's series [0]. The rest of Michael's series depend on
them.
x86/hyperv: Change vTOM handling to use standard coco mechanisms
init: Call mem_encrypt_init() after Hyper-V hypercall init is done
x86/mm: Handle decryption/re-encryption of bss_decrypted consistently
Drivers: hv: Explicitly request decrypted in vmap_pfn() calls
x86/hyperv: Reorder code to facilitate future work
x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM
0: https://lore.kernel.org/linux-hyperv/1679838727-87310-1-git-send-email-mikelley@microsoft.com/
|
|
acpi_sleep_state_supported() is defined only when CONFIG_ACPI=y. The
function is in acpi_bus.h, and acpi_bus.h can only be used in
CONFIG_ACPI=y cases. Add the stub function to linux/acpi.h to make
compilation successful for !CONFIG_ACPI cases.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1679298460-11855-3-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was only ever used by btrfs, and the usage just went away.
This effectively reverts df91f56adce1 ("libcrc32c: Add crc32c_impl
function").
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
REQ_CGROUP_PUNT is a bit annoying as it is hard to follow and adds
a branch to the bio submission hot path. To fix this, export
blkcg_punt_bio_submit and let btrfs call it directly. Add a new
REQ_FS_PRIVATE flag for btrfs to indicate to it's own low-level
bio submission code that a punt to the cgroup submission helper
is required.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
punt_to_cgroup is only used by extent_write_locked_range, but that
function also directly controls the bio flags for the actual submission.
Remove th punt_to_cgroup field, and just set REQ_CGROUP_PUNT directly
in extent_write_locked_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In btrfs_io_context structure, we have a pointer raid_map, which
indicates the logical bytenr for each stripe.
But considering we always call sort_parity_stripes(), the result
raid_map[] is always sorted, thus raid_map[0] is always the logical
bytenr of the full stripe.
So why we waste the space and time (for sorting) for raid_map?
This patch will replace btrfs_io_context::raid_map with a single u64
number, full_stripe_start, by:
- Replace btrfs_io_context::raid_map with full_stripe_start
- Replace call sites using raid_map[0] to use full_stripe_start
- Replace call sites using raid_map[i] to compare with nr_data_stripes.
The benefits are:
- Less memory wasted on raid_map
It's sizeof(u64) * num_stripes vs sizeof(u64).
It'll always save at least one u64, and the benefit grows larger with
num_stripes.
- No more weird alloc_btrfs_io_context() behavior
As there is only one fixed size + one variable length array.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull more thermal control changes for 6.4-rc1 from Daniel Lezcano:
"- Do preparating cleaning and DT bindings for RK3588 support
(Sebastian Reichel)
- Add driver support for RK3588 (Finley Xiao)
- Use devm_reset_control_array_get_exclusive() for the Rockchip driver
(Ye Xingchen)
- Detect power gated thermal zones and return -EAGAIN when reading the
temperature (Mikko Perttunen)
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring)
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn)
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai)
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI)
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano)
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano)"
* tag 'thermal-v6.4-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/core: Alloc-copy-free the thermal zone parameters structure
thermal/of: Unexport unused OF functions
thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
thermal: amlogic: Use dev_err_probe()
thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
dt-bindings: thermal: Drop unneeded quotes
thermal/core: Remove thermal_bind_params structure
thermal/drivers/tegra-bpmp: Handle offline zones
thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
thermal/drivers/rockchip: Support dynamic sized sensor array
thermal/drivers/rockchip: Simplify channel id logic
thermal/drivers/rockchip: Use dev_err_probe
thermal/drivers/rockchip: Simplify clock logic
thermal/drivers/rockchip: Simplify getting match data
|
|
ASoC need to use card->mutex with _INIT or _RUNTIME,
but there is no helper function for it.
This patch adds its helper function and use it.
Because people might misunderstand that _init() is mutex initialization,
this patch renames _INIT to _ROOT and adds new
snd_soc_card_mutex_lock_root() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a5zlx3tw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc-pcm.c has snd_soc_dpcm_mutex_lock/unlock(),
but other files can't use it because it is static function.
It requests snd_soc_pcm_runtime as parameter (A), but sometimes we
want to use it by snd_soc_card (B).
(A) static inline void snd_soc_dpcm_mutex_lock(struct snd_soc_pcm_runtime *rtd)
{
mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
} ^^^^^^^^^
(B) mutex_lock_nested(&card->pcm_mutex, card->pcm_subclass);
^^^^
We want to use it with both "rtd" and "card" for dapm lock/unlock.
To enable it, this patch uses _Generic macro.
This patch makes snd_soc_dpcm_mutex_{un}lock() global function, and use it on
each files.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkk1x3ud.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc.h has snd_soc_dapm_mutex_lock/unlock() definition and
many drivers are using it, but soc-dapm.c is not.
1st reason is snd_soc_dapm_mutex_lock/unlock() requests
snd_soc_dapm_context pointer as parameter (A), but sometimes soc-dapm.c
needs to use snd_soc_card (B).
(A) static inline void snd_soc_dapm_mutex_lock(struct snd_soc_dapm_context *dapm)
{
mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
} ^^^^^^^^^^
(B) mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
^^^^
2nd reason is it want to use SND_SOC_DAPM_CLASS_INIT for mutex_lock_nested(),
but helper is using _RUNTIME (A).
The conclusion is we want to use "dapm vs card" and "_RUNTIME vs _INIT"
for dapm lock/unlock. To enable this selfish request, this patch uses
_Generic macro. We can use snd_soc_dapm_mutex_lock/unlock() for both
dapm and card case.
snd_soc_dapm_mutex_lock(dapm); snd_soc_dapm_mutex_unlock(dapm);
snd_soc_dapm_mutex_lock(card); snd_soc_dapm_mutex_unlock(card);
Current soc-dapm.c is using both mutex_lock() and mutex_lock_nested().
This patch handles mutex_lock() as mutex_lock_nested(..., 0),
in other words, handles below as same.
mutex_lock(&card->dapm_mutex);
mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_INIT);
Because people might misunderstand that _init() is mutex initialization,
this patch renames _INIT to _ROOT and adds new
snd_soc_dapm_mutex_lock_root() for it.
This patch also moves snd_soc_dapm_subclass definition from soc-dapm.h
to soc.h to keep related code together.
Because very complex soc.h vs soc-dapm.h relationship,
it is difficult/impossible to define these helper into soc-dapm.h.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87cz4hx3v0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nftables can be built as a module, so fix the preprocessor conditional
accordingly.
Fixes: 478b360a47b7 ("netfilter: nf_tables: fix nf_trace always-on with XT_TRACE=n")
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In the latest RFC9260, the Host Name Address param has been deprecated.
For INIT chunk:
Note 3: An INIT chunk MUST NOT contain the Host Name Address
parameter. The receiver of an INIT chunk containing a Host Name
Address parameter MUST send an ABORT chunk and MAY include an
"Unresolvable Address" error cause.
For Supported Address Types:
The value indicating the Host Name Address parameter MUST NOT be
used when sending this parameter and MUST be ignored when receiving
this parameter.
Currently Linux SCTP doesn't really support Host Name Address param,
but only saves some flag and print debug info, which actually won't
even be triggered due to the verification in sctp_verify_param().
This patch is to delete those dead code.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
We have a long chain of memory dereferencing just to whether or not
this disk has a special submit_bio helper. As that's not necessarily
the common case, add a bd_has_submit_bio state in the bdev to avoid
traversing this memory dependency chain if we don't need to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This moves struct device out-of-line as it's just used at open/close
time, so we can keep some of the commonly used fields closer together.
On a standard setup, it also reduces the size from 864 bytes to 848
bytes. Yes, struct device is a pig...
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As the first step of converting hardcoded blocksize to that specified in
on-disk superblock, convert all call sites of hardcoded blocksize to
sb->s_blocksize except for:
1) use sbi->blkszbits instead of sb->s_blocksize in
erofs_superblock_csum_verify() since sb->s_blocksize has not been
updated with the on-disk blocksize yet when the function is called.
2) use inode->i_blkbits instead of sb->s_blocksize in erofs_bread(),
since the inode operated on may be an anonymous inode in fscache mode.
Currently the anonymous inode is allocated from an anonymous mount
maintained in erofs, while in the near future we may allocate anonymous
inodes from a generic API directly and thus have no access to the
anonymous inode's i_sb. Thus we keep the block size in i_blkbits for
anonymous inodes in fscache mode.
Be noted that this patch only gets rid of the hardcoded blocksize, in
preparation for actually setting the on-disk block size in the following
patch. The hard limit of constraining the block size to PAGE_SIZE still
exists until the next patch.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230313135309.75269-2-jefflexu@linux.alibaba.com
[ Gao Xiang: fold a patch to fix incorrect truncated offsets. ]
Link: https://lore.kernel.org/r/20230413035734.15457-1-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
We've managed to improve the UX for kptrs significantly over the last 9
months. All of the existing use cases which previously had KF_KPTR_GET
kfuncs (struct bpf_cpumask *, struct task_struct *, and struct cgroup *)
have all been updated to be synchronized using RCU. In other words,
their KF_KPTR_GET kfuncs have been removed in favor of KF_RCU |
KF_ACQUIRE kfuncs, with the pointers themselves also being readable from
maps in an RCU read region thanks to the types being RCU safe.
While KF_KPTR_GET was a logical starting point for kptrs, it's become
clear that they're not the correct abstraction. KF_KPTR_GET is a flag
that essentially does nothing other than enforcing that the argument to
a function is a pointer to a referenced kptr map value. At first glance,
that's a useful thing to guarantee to a kfunc. It gives kfuncs the
ability to try and acquire a reference on that kptr without requiring
the BPF prog to do something like this:
struct kptr_type *in_map, *new = NULL;
in_map = bpf_kptr_xchg(&map->value, NULL);
if (in_map) {
new = bpf_kptr_type_acquire(in_map);
in_map = bpf_kptr_xchg(&map->value, in_map);
if (in_map)
bpf_kptr_type_release(in_map);
}
That's clearly a pretty ugly (and racy) UX, and if using KF_KPTR_GET is
the only alternative, it's better than nothing. However, the problem
with any KF_KPTR_GET kfunc lies in the fact that it always requires some
kind of synchronization in order to safely do an opportunistic acquire
of the kptr in the map. This is because a BPF program running on another
CPU could do a bpf_kptr_xchg() on that map value, and free the kptr
after it's been read by the KF_KPTR_GET kfunc. For example, the
now-removed bpf_task_kptr_get() kfunc did the following:
struct task_struct *bpf_task_kptr_get(struct task_struct **pp)
{
struct task_struct *p;
rcu_read_lock();
p = READ_ONCE(*pp);
/* If p is non-NULL, it could still be freed by another CPU,
* so we have to do an opportunistic refcount_inc_not_zero()
* and return NULL if the task will be freed after the
* current RCU read region.
*/
|f (p && !refcount_inc_not_zero(&p->rcu_users))
p = NULL;
rcu_read_unlock();
return p;
}
In other words, the kfunc uses RCU to ensure that the task remains valid
after it's been peeked from the map. However, this is completely
redundant with just defining a KF_RCU kfunc that itself does a
refcount_inc_not_zero(), which is exactly what bpf_task_acquire() now
does.
So, the question of whether KF_KPTR_GET is useful is actually, "Are
there any synchronization mechanisms / safety flags that are required by
certain kptrs, but which are not provided by the verifier to kfuncs?"
The answer to that question today is "No", because every kptr we
currently care about is RCU protected.
Even if the answer ever became "yes", the proper way to support that
referenced kptr type would be to add support for whatever
synchronization mechanism it requires in the verifier, rather than
giving kfuncs a flag that says, "Here's a pointer to a referenced kptr
in a map, do whatever you need to do."
With all that said -- so as to allow us to consolidate the kfunc API,
and simplify the verifier a bit, this patch removes KF_KPTR_GET, and all
relevant logic from the verifier.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230416084928.326135-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The syscall user dispatch configuration can only be set by the task itself,
but lacks a ptrace set/get interface which makes it impossible to implement
checkpoint/restore for it.
Add the required ptrace requests and the get/set functions in the syscall
user dispatch code to make that possible.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230407171834.3558-4-gregory.price@memverge.com
|
|
Rename existing HCA capability relaxed_ordering_read to
relaxed_ordering_read_pci_enabled. This is in accordance with recent PRM
change to better describe the capability, as it's set only if both the
device supports relaxed ordering (RO) read and RO is enabled in PCI
config space.
In addition, add new HCA capability relaxed_ordering_read which is set
if the device supports RO read, regardless of RO in PCI config space.
This will be used in the following patch to allow RO in VFs and VMs.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Link: https://lore.kernel.org/r/caa0002fd8135086357dfcc368e2f5cc73b08480.1681131553.git.leon@kernel.org
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Make it clearer what is going on by adding a function to go back from the
"virtual" dma_addr to a kva and another to a struct page. This is used in the
ib_uses_virt_dma() style drivers (siw, rxe, hfi, qib).
Call them instead of a naked casting and virt_to_page() when working with dma_addr
values encoded by the various ib_map functions.
This also fixes the virt_to_page() casting problem Linus Walleij has been
chasing.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v2-05ea785520ed+10-ib_virt_page_jgg@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
swiotlb currently reports the total number of slabs and the instantaneous
in-use slabs in debugfs. But with increased usage of swiotlb for all I/O
in Confidential Computing (coco) VMs, it has become difficult to know
how much memory to allocate for swiotlb bounce buffers, either via the
automatic algorithm in the kernel or by specifying a value on the
kernel boot line. The current automatic algorithm generously allocates
swiotlb bounce buffer memory, and may be wasting significant memory in
many use cases.
To support better understanding of swiotlb usage, add tracking of the
the high water mark for usage of the default swiotlb bounce buffer memory
pool and any reserved memory pools. Report these high water marks in
debugfs along with the other swiotlb pool metrics. Allow the high water
marks to be reset to zero at runtime by writing to them.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
All btf_fields in an object are 0-initialized by memset in
bpf_obj_init. This might not be a valid initial state for some field
types, in which case kfuncs that use the type will properly initialize
their input if it's been 0-initialized. Some BPF graph collection types
and kfuncs do this: bpf_list_{head,node} and bpf_rb_node.
An earlier patch in this series added the bpf_refcount field, for which
the 0 state indicates that the refcounted object should be free'd.
bpf_obj_init treats this field specially, setting refcount to 1 instead
of relying on scattered "refcount is 0? Must have just been initialized,
let's set to 1" logic in kfuncs.
This patch extends this treatment to list and rbtree field types,
allowing most scattered initialization logic in kfuncs to be removed.
Note that bpf_{list_head,rb_root} may be inside a BPF map, in which case
they'll be 0-initialized without passing through the newly-added logic,
so scattered initialization logic must remain for these collection root
types.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-9-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Consider this code snippet:
struct node {
long key;
bpf_list_node l;
bpf_rb_node r;
bpf_refcount ref;
}
int some_bpf_prog(void *ctx)
{
struct node *n = bpf_obj_new(/*...*/), *m;
bpf_spin_lock(&glock);
bpf_rbtree_add(&some_tree, &n->r, /* ... */);
m = bpf_refcount_acquire(n);
bpf_rbtree_add(&other_tree, &m->r, /* ... */);
bpf_spin_unlock(&glock);
/* ... */
}
After bpf_refcount_acquire, n and m point to the same underlying memory,
and that node's bpf_rb_node field is being used by the some_tree insert,
so overwriting it as a result of the second insert is an error. In order
to properly support refcounted nodes, the rbtree and list insert
functions must be allowed to fail. This patch adds such support.
The kfuncs bpf_rbtree_add, bpf_list_push_{front,back} are modified to
return an int indicating success/failure, with 0 -> success, nonzero ->
failure.
bpf_obj_drop on failure
=======================
Currently the only reason an insert can fail is the example above: the
bpf_{list,rb}_node is already in use. When such a failure occurs, the
insert kfuncs will bpf_obj_drop the input node. This allows the insert
operations to logically fail without changing their verifier owning ref
behavior, namely the unconditional release_reference of the input
owning ref.
With insert that always succeeds, ownership of the node is always passed
to the collection, since the node always ends up in the collection.
With a possibly-failed insert w/ bpf_obj_drop, ownership of the node
is always passed either to the collection (success), or to bpf_obj_drop
(failure). Regardless, it's correct to continue unconditionally
releasing the input owning ref, as something is always taking ownership
from the calling program on insert.
Keeping owning ref behavior unchanged results in a nice default UX for
insert functions that can fail. If the program's reaction to a failed
insert is "fine, just get rid of this owning ref for me and let me go
on with my business", then there's no reason to check for failure since
that's default behavior. e.g.:
long important_failures = 0;
int some_bpf_prog(void *ctx)
{
struct node *n, *m, *o; /* all bpf_obj_new'd */
bpf_spin_lock(&glock);
bpf_rbtree_add(&some_tree, &n->node, /* ... */);
bpf_rbtree_add(&some_tree, &m->node, /* ... */);
if (bpf_rbtree_add(&some_tree, &o->node, /* ... */)) {
important_failures++;
}
bpf_spin_unlock(&glock);
}
If we instead chose to pass ownership back to the program on failed
insert - by returning NULL on success or an owning ref on failure -
programs would always have to do something with the returned ref on
failure. The most likely action is probably "I'll just get rid of this
owning ref and go about my business", which ideally would look like:
if (n = bpf_rbtree_add(&some_tree, &n->node, /* ... */))
bpf_obj_drop(n);
But bpf_obj_drop isn't allowed in a critical section and inserts must
occur within one, so in reality error handling would become a
hard-to-parse mess.
For refcounted nodes, we can replicate the "pass ownership back to
program on failure" logic with this patch's semantics, albeit in an ugly
way:
struct node *n = bpf_obj_new(/* ... */), *m;
bpf_spin_lock(&glock);
m = bpf_refcount_acquire(n);
if (bpf_rbtree_add(&some_tree, &n->node, /* ... */)) {
/* Do something with m */
}
bpf_spin_unlock(&glock);
bpf_obj_drop(m);
bpf_refcount_acquire is used to simulate "return owning ref on failure".
This should be an uncommon occurrence, though.
Addition of two verifier-fixup'd args to collection inserts
===========================================================
The actual bpf_obj_drop kfunc is
bpf_obj_drop_impl(void *, struct btf_struct_meta *), with bpf_obj_drop
macro populating the second arg with 0 and the verifier later filling in
the arg during insn fixup.
Because bpf_rbtree_add and bpf_list_push_{front,back} now might do
bpf_obj_drop, these kfuncs need a btf_struct_meta parameter that can be
passed to bpf_obj_drop_impl.
Similarly, because the 'node' param to those insert functions is the
bpf_{list,rb}_node within the node type, and bpf_obj_drop expects a
pointer to the beginning of the node, the insert functions need to be
able to find the beginning of the node struct. A second
verifier-populated param is necessary: the offset of {list,rb}_node within the
node type.
These two new params allow the insert kfuncs to correctly call
__bpf_obj_drop_impl:
beginning_of_node = bpf_rb_node_ptr - offset
if (already_inserted)
__bpf_obj_drop_impl(beginning_of_node, btf_struct_meta->record);
Similarly to other kfuncs with "hidden" verifier-populated params, the
insert functions are renamed with _impl prefix and a macro is provided
for common usage. For example, bpf_rbtree_add kfunc is now
bpf_rbtree_add_impl and bpf_rbtree_add is now a macro which sets
"hidden" args to 0.
Due to the two new args BPF progs will need to be recompiled to work
with the new _impl kfuncs.
This patch also rewrites the "hidden argument" explanation to more
directly say why the BPF program writer doesn't need to populate the
arguments with anything meaningful.
How does this new logic affect non-owning references?
=====================================================
Currently, non-owning refs are valid until the end of the critical
section in which they're created. We can make this guarantee because, if
a non-owning ref exists, the referent was added to some collection. The
collection will drop() its nodes when it goes away, but it can't go away
while our program is accessing it, so that's not a problem. If the
referent is removed from the collection in the same CS that it was added
in, it can't be bpf_obj_drop'd until after CS end. Those are the only
two ways to free the referent's memory and neither can happen until
after the non-owning ref's lifetime ends.
On first glance, having these collection insert functions potentially
bpf_obj_drop their input seems like it breaks the "can't be
bpf_obj_drop'd until after CS end" line of reasoning. But we care about
the memory not being _freed_ until end of CS end, and a previous patch
in the series modified bpf_obj_drop such that it doesn't free refcounted
nodes until refcount == 0. So the statement can be more accurately
rewritten as "can't be free'd until after CS end".
We can prove that this rewritten statement holds for any non-owning
reference produced by collection insert functions:
* If the input to the insert function is _not_ refcounted
* We have an owning reference to the input, and can conclude it isn't
in any collection
* Inserting a node in a collection turns owning refs into
non-owning, and since our input type isn't refcounted, there's no
way to obtain additional owning refs to the same underlying
memory
* Because our node isn't in any collection, the insert operation
cannot fail, so bpf_obj_drop will not execute
* If bpf_obj_drop is guaranteed not to execute, there's no risk of
memory being free'd
* Otherwise, the input to the insert function is refcounted
* If the insert operation fails due to the node's list_head or rb_root
already being in some collection, there was some previous successful
insert which passed refcount to the collection
* We have an owning reference to the input, it must have been
acquired via bpf_refcount_acquire, which bumped the refcount
* refcount must be >= 2 since there's a valid owning reference and the
node is already in a collection
* Insert triggering bpf_obj_drop will decr refcount to >= 1, never
resulting in a free
So although we may do bpf_obj_drop during the critical section, this
will never result in memory being free'd, and no changes to non-owning
ref logic are needed in this patch.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-6-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A local kptr is considered 'refcounted' when it is of a type that has a
bpf_refcount field. When such a kptr is created, its refcount should be
initialized to 1; when destroyed, the object should be free'd only if a
refcount decr results in 0 refcount.
Existing logic always frees the underlying memory when destroying a
local kptr, and 0-initializes all btf_record fields. This patch adds
checks for "is local kptr refcounted?" and new logic for that case in
the appropriate places.
This patch focuses on changing existing semantics and thus conspicuously
does _not_ provide a way for BPF programs in increment refcount. That
follows later in the series.
__bpf_obj_drop_impl is modified to do the right thing when it sees a
refcounted type. Container types for graph nodes (list, tree, stashed in
map) are migrated to use __bpf_obj_drop_impl as a destructor for their
nodes instead of each having custom destruction code in their _free
paths. Now that "drop" isn't a synonym for "free" when the type is
refcounted it makes sense to centralize this logic.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A 'struct bpf_refcount' is added to the set of opaque uapi/bpf.h types
meant for use in BPF programs. Similarly to other opaque types like
bpf_spin_lock and bpf_rbtree_node, the verifier needs to know where in
user-defined struct types a bpf_refcount can be located, so necessary
btf_record plumbing is added to enable this. bpf_refcount is sized to
hold a refcount_t.
Similarly to bpf_spin_lock, the offset of a bpf_refcount is cached in
btf_record as refcount_off in addition to being in the field array.
Caching refcount_off makes sense for this field because further patches
in the series will modify functions that take local kptrs (e.g.
bpf_obj_drop) to change their behavior if the type they're operating on
is refcounted. So enabling fast "is this type refcounted?" checks is
desirable.
No such verifier behavior changes are introduced in this patch, just
logic to recognize 'struct bpf_refcount' in btf_record.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The btf_field_offs struct contains (offset, size) for btf_record fields,
sorted by offset. btf_field_offs is always used in conjunction with
btf_record, which has btf_field 'fields' array with (offset, type), the
latter of which btf_field_offs' size is derived from via
btf_field_type_size.
This patch adds a size field to struct btf_field and sorts btf_record's
fields by offset, making it possible to get rid of btf_field_offs. Less
data duplication and less code complexity results.
Since btf_field_offs' lifetime closely followed the btf_record used to
populate it, most complexity wins are from removal of initialization
code like:
if (btf_record_successfully_initialized) {
foffs = btf_parse_field_offs(rec);
if (IS_ERR_OR_NULL(foffs))
// free the btf_record and return err
}
Other changes in this patch are pretty mechanical:
* foffs->field_off[i] -> rec->fields[i].offset
* foffs->field_sz[i] -> rec->fields[i].size
* Sort rec->fields in btf_parse_fields before returning
* It's possible that this is necessary independently of other
changes in this patch. btf_record_find in syscall.c expects
btf_record's fields to be sorted by offset, yet there's no
explicit sorting of them before this patch, record's fields are
populated in the order they're read from BTF struct definition.
BTF docs don't say anything about the sortedness of struct fields.
* All functions taking struct btf_field_offs * input now instead take
struct btf_record *. All callsites of these functions already have
access to the correct btf_record.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230415201811.343116-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of waiting for rsrc_data->refs to be downed to zero, check
whether there are rsrc nodes queued for completion, that's easier then
maintaining references.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8e33fd143d83e11af3e386aea28eb6d6c6a1be10.1681395792.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace completions with waitqueues for rsrc data quiesce, the main
wakeup condition is when data refs hit zero. Note that data refs are
only changes under ->uring_lock, so we prepare before mutex_unlock()
reacquire it after taking the lock back. This change will be needed
in the next patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1d0dbc74b3b4fd67c8f01819e680c5e0da252956.1681395792.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The sr030pc30 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v2.6.37. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The s5k6aa camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The noon010pc30 camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.16. A device tree file
referencing the device has been added in v3.17, but without
corresponding DT bindings, and with DT support in the driver. The driver
thus hasn't been used since v316. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The mt9t001 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.2. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The mt9m032 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.4. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
