| Age | Commit message (Collapse) | Author |
|---|
|
Re-enabling NFSv3 LOCALIO is made more complex (than NFSv4) because v3
is stateless. As such, the hueristic used to identify a LOCALIO probe
point is more adhoc by nature: if/when NFSv3 client IO begins to
complete again in terms of normal RPC-based NFSv3 server IO, attempt
nfs_local_probe_async().
Care is taken to throttle the frequency of nfs_local_probe_async(),
otherwise there could be a flood of repeat calls to
nfs_local_probe_async().
The throttle is admin controlled using a new module parameter for
nfsv3, e.g.:
echo 512 > /sys/module/nfsv3/parameters/nfs3_localio_probe_throttle
Probe for NFSv3 LOCALIO every N IO requests (512 in this case). Must
be power-of-2, defaults to 0 (probing disabled).
On systems that expect to use LOCALIO with NFSv3 the admin should
configure the 'nfs3_localio_probe_throttle' module parameter.
This commit backfills module parameter documentation in localio.rst
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Introduce nfs_local_probe_async() for the NFS client to initiate
if/when it reconnects with server. For NFSv4 it is a simple matter to
call nfs_local_probe_async() from nfs4_do_reclaim (during NFSv4
grace).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Remove nfs_local_enable and nfs_local_disable, instead use
nfs_localio_enable_client and nfs_localio_disable_client.
Discontinue use of the NFS_CS_LOCAL_IO bit in the nfs_client struct's
cl_flags to reflect that LOCALIO is enabled; instead just test if the
net member of the nfs_uuid_t struct is set.
Also remove NFS_CS_LOCAL_IO.
Lastly, remove trace_nfs_local_enable and trace_nfs_local_disable
because comparable traces are available from nfs_localio.ko.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This tracking enables __nfsd_file_cache_purge() to call
nfs_localio_invalidate_clients(), upon shutdown or export change, to
nfs_close_local_fh() all open nfsd_files that are still cached by the
LOCALIO nfs clients associated with nfsd_net that is being shutdown.
Now that the client must track all open nfsd_files there was more work
than necessary being done with the global nfs_uuids_lock contended.
This manifested in various RCU issues, e.g.:
hrtimer: interrupt took 47969440 ns
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
Use nfs_uuid->lock to protect all nfs_uuid_t members, instead of
nfs_uuids_lock, once nfs_uuid_is_local() adds the client to
nn->local_clients.
Also add 'local_clients_lock' to 'struct nfsd_net' to protect
nn->local_clients. And store a pointer to spinlock in the 'list_lock'
member of nfs_uuid_t so nfs_localio_disable_client() can use it to
avoid taking the global nfs_uuids_lock.
In combination, these split out locks eliminate the use of the single
nfslocalio.c global nfs_uuids_lock in the IO paths (open and close).
Also refactored associated fs/nfs_common/nfslocalio.c methods' locking
to reduce work performed with spinlocks held in general.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Also update Documentation/filesystems/nfs/localio.rst accordingly
and reduce the technical documentation debt that was previously
captured in that document.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This commit switches from leaning heavily on NFSD's filecache (in
terms of GC'd nfsd_files) back to caching nfsd_files in the
client. A later commit will add the callback mechanism needed to
allow NFSD to force the NFS client to cleanup all cached nfsd_files.
Add nfs_fh_localio_init() and 'struct nfs_fh_localio' to cache opened
nfsd_file(s) (both a RO and RW nfsd_file is able to be opened and
cached for a given nfs_fh).
Update nfs_local_open_fh() to cache the nfsd_file once it is opened
using __nfs_local_open_fh().
Introduce nfs_close_local_fh() to clear the cached open nfsd_files and
call nfs_to_nfsd_file_put_local().
Refcounting is such that:
- nfs_local_open_fh() is paired with nfs_close_local_fh().
- __nfs_local_open_fh() is paired with nfs_to_nfsd_file_put_local().
- nfs_local_file_get() is paired with nfs_local_file_put().
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Remove cl_localio_lock from 'struct nfs_client' in favor of adding a
lock to the nfs_uuid_t struct (which is embedded in each nfs_client).
Push nfs_local_{enable,disable} implementation down to nfs_common.
Those methods now call nfs_localio_{enable,disable}_client.
This allows implementing nfs_localio_invalidate_clients in terms of
nfs_localio_disable_client.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Rename nfs_uuid_invalidate_one_client to nfs_localio_disable_client.
Rename nfs_uuid_invalidate_clients to nfs_localio_invalidate_clients.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
In later a commit LOCALIO must call both nfsd_file_get and
nfsd_file_put to manage extra nfsd_file references.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This commit simply adds the required O_DIRECT plumbing. It doesn't
address the fact that NFS doesn't ensure all writes are page aligned
(nor device logical block size aligned as required by O_DIRECT).
Because NFS will read-modify-write for IO that isn't aligned, LOCALIO
will not use O_DIRECT semantics by default if/when an application
requests the use of O_DIRECT. Allow the use of O_DIRECT semantics by:
1: Adding a flag to the nfs_pgio_header struct to allow the NFS
O_DIRECT layer to signal that O_DIRECT was used by the application
2: Adding a 'localio_O_DIRECT_semantics' NFS module parameter that
when enabled will cause LOCALIO to use O_DIRECT semantics (this may
cause IO to fail if applications do not properly align their IO).
This commit is derived from code developed by Weston Andros Adamson.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Prior patch in the series added TCP_RFC7323_PAWS_ACK drop reason.
This patch adds the corresponding SNMP counter, for folks
using nstat instead of tracing for TCP diagnostics.
nstat -az | grep PAWSOldAck
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250113135558.3180360-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XPS can cause reorders because of the relaxed OOO
conditions for pure ACK packets.
For hosts not using RFS, what can happpen is that ACK
packets are sent on behalf of the cpu processing NIC
interrupts, selecting TX queue A for ACK packet P1.
Then a subsequent sendmsg() can run on another cpu.
TX queue selection uses the socket hash and can choose
another queue B for packets P2 (with payload).
If queue A is more congested than queue B,
the ACK packet P1 could be sent on the wire after
P2.
A linux receiver when processing P1 (after P2) currently increments
LINUX_MIB_PAWSESTABREJECTED (TcpExtPAWSEstab)
and use TCP_RFC7323_PAWS drop reason.
It might also send a DUPACK if not rate limited.
In order to better understand this pattern, this
patch adds a new drop_reason : TCP_RFC7323_PAWS_ACK.
For old ACKS like these, we no longer increment
LINUX_MIB_PAWSESTABREJECTED and no longer sends a DUPACK,
keeping credit for other more interesting DUPACK.
perf record -e skb:kfree_skb -a
perf script
...
swapper 0 [148] 27475.438637: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438706: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.438908: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439010: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [148] 27475.439214: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
swapper 0 [208] 27475.439286: skb:kfree_skb: ... location=tcp_validate_incoming+0x4f0 reason: TCP_RFC7323_PAWS_ACK
...
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250113135558.3180360-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-01-14
The following pull-request contains mlx5 IFC updates.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add nic_cap_reg and vhca_icm_ctrl registers
net/mlx5: SHAMPO: Introduce new SHAMPO specific HCA caps
net/mlx5: Add support for MRTCQ register
net/mlx5: Update mlx5_ifc to support FEC for 200G per lane link modes
====================
Link: https://patch.msgid.link/20250114055700.1928736-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kobj_ns_initial() and kobj_ns_netlink() were adde din 2010 by
commit bc451f205823 ("kobj: Add basic infrastructure for dealing with
namespaces.")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250112144907.270272-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Seen the following build error:
./include/linux/prmt.h:5:27: error: unknown type name ‘guid_t’
5 | int acpi_call_prm_handler(guid_t handler_guid, void *param_buffer);
| ^~~~~~
The include file uses guid_t but it is not declared. Include
linux/uuid.h to fix this.
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://patch.msgid.link/20250107161923.3387552-1-rrichter@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
drm-next has the dmem cgroup patches we need to merge fixes for.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
In the original change, rawmidi_info.tied_device showed -1 for the
unknown or untied device. But this would require the user-space to
check the protocol version and judge the value conditionally, which
is rather error-prone.
Instead, set the tied_device = 0 to be default as unknown, and
indicate the real device with the offset 1, for achieving more
backward compatibility.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250114104711.19197-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove PSE-specific structures from the ethtool header to improve code
modularity, maintain independent headers, and reduce incremental build
time.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The is_enabled callback is now redundant as the admin_state can be obtained
directly from the driver and provides the same information.
To simplify functionality, the core will handle this internally, making
the is_enabled callback unnecessary at the driver level. Remove the
callback from all drivers.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ethtool_get_status callback currently handles all status and PSE
information within a single function. This approach has two key
drawbacks:
1. If the core requires some information for purposes other than
ethtool_get_status, redundant code will be needed to fetch the same
data from the driver (like is_enabled).
2. Drivers currently have access to all information passed to ethtool.
New variables will soon be added to ethtool status, such as PSE ID,
power domain IDs, and budget evaluation strategies, which are meant
to be managed solely by the core. Drivers should not have the ability
to modify these variables.
To resolve these issues, ethtool_get_status has been split into multiple
callbacks, with each handling a specific piece of information required
by ethtool or the core.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The regulator framework uses current limits, but the PSE standard and
known PSE controllers rely on power limits. Instead of converting
current to power within each driver, perform the conversion in the PSE
core. This avoids redundancy in driver implementation and aligns better
with the standard, simplifying driver development.
Remove at the same time the _pse_ethtool_get_status() function which is
not needed anymore.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Checking only the current limit is not sufficient. According to the
standard, voltage can reach up to 57V and current up to 1.92A, which
exceeds the power limit described in the standard (99.9W). Add a power
limit check to prevent this.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Removed the unused pse_ethtool_get_pw_limit() function declaration from
pse.h. This function was declared but never implemented or used,
making the declaration unnecessary.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kyle Swenson <kyle.swenson@est.tech>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On ARMv7 / v7m machines read CTR and CLIDR registers to provide
information regarding the cache topology. Earlier machines should
describe full cache topology in the device tree.
Note, this follows the ARM64 cacheinfo support and provides only minimal
support required to bootstrap cache info. All useful properties should
be decribed in Device Tree.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
More and more I2C client drivers use debugfs entries and currently they
need to manage a subdir for their files on their own. This means
inconsistent naming for these subdirs and they are scattered all over
the debugfs-tree as well. Not to mention the duplicated code.
Let the I2C core provide and maintain a proper directory per client.
Note: It was considered to save the additional pointer in 'struct
i2c_client' and only provide a subdir when requested via a helper
function. When sketching this approach, more and more corner cases
appeared, though, so the current solution with its simple and unabiguous
code was chosen.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
Create an API to get the net_device to the slave port of HSR device. The
API will take hsr net_device and enum hsr_port_type for which we want the
net_device as arguments.
This API can be used by client drivers who support HSR and want to get
the net_devcie of slave ports from the hsr device. Export this API for
the same.
This API needs the enum hsr_port_type to be accessible by the drivers using
hsr. Move the enum hsr_port_type from net/hsr/hsr_main.h to
include/linux/if_hsr.h for the same.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add multicast filtering support for VLAN interfaces in dual EMAC mode
for ICSSG driver.
The driver uses vlan_for_each() API to get the list of available
vlans. The driver then sync mc addr of vlan interface with a locally
mainatined list emac->vlan_mcast_list[vid] using __hw_addr_sync_multiple()
API.
__hw_addr_sync_multiple() is used instead of __hw_addr_sync() to sync
vdev->mc with local list because the sync_cnt for addresses in vdev->mc
will already be set by the vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c]
and __hw_addr_sync() only syncs when the sync_cnt == 0. Whereas
__hw_addr_sync_multiple() can sync addresses even if sync_cnt is not 0.
Export __hw_addr_sync_multiple() so that driver can use it.
Once the local list is synced, driver calls __hw_addr_sync_dev() with
the local list, vdev, sync and unsync callbacks.
__hw_addr_sync_dev() is used with the local maintained list as the list
to synchronize instead of using __dev_mc_sync() on vdev because
__dev_mc_sync() on vdev will call __hw_addr_sync_dev() on vdev->mc and
sync_cnt for addresses in vdev->mc will already be set by the
vlan_dev_set_rx_mode() [net/8021q/vlan_dev.c] and __hw_addr_sync_dev()
only syncs if the sync_cnt of addresses in the list (vdev->mc in this case)
is 0. Whereas __hw_addr_sync_dev() on local list will work fine as the
sync_cnt for addresses in the local list will still be 0.
Based on change in addresses in the local list, sync / unsync callbacks
are invoked. In the sync / unsync API in driver, based on whether the ndev
is vlan or not, driver passes appropriate vid to FDB helper functions.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains a small batch of Netfilter/IPVS updates
for net-next:
1) Remove unused genmask parameter in nf_tables_addchain()
2) Speed up reads from /proc/net/ip_vs_conn, from Florian Westphal.
3) Skip empty buckets in hashlimit to avoid atomic operations that results
in false positive reports by syzbot with lockdep enabled, patch from
Eric Dumazet.
4) Add conntrack event timestamps available via ctnetlink,
from Florian Westphal.
netfilter pull request 25-01-11
* tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: add conntrack event timestamp
netfilter: xt_hashlimit: htable_selective_cleanup() optimization
ipvs: speed up reads from ip_vs_conn proc file
netfilter: nf_tables: remove the genmask parameter
====================
Link: https://patch.msgid.link/20250111230800.67349-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add an optional polling interface for PHY statistics to simplify driver
implementation.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a new way to report PHY statistics in a structured and
standardized format using the netlink API. This new method does not
replace the old driver-specific stats, which can still be accessed with
`ethtool -S <eth name>`. The structured stats are available with
`ethtool -S <eth name> --all-groups`.
This new method makes it easier to diagnose problems by organizing stats
in a consistent and documented way.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce support for standardized PHY statistics reporting in ethtool
by extending the PHYLIB framework. Add the functions
phy_ethtool_get_phy_stats() and phy_ethtool_get_link_ext_stats() to
provide a consistent interface for retrieving PHY-level and
link-specific statistics. These functions are used within the ethtool
implementation to avoid direct access to the phy_device structure
outside of the PHYLIB framework.
A new structure, ethtool_phy_stats, is introduced to standardize PHY
statistics such as packet counts, byte counts, and error counters.
Drivers are updated to include callbacks for retrieving PHY and
link-specific statistics, ensuring values are explicitly set only for
supported fields, initialized with ETHTOOL_STAT_NOT_SET to avoid
ambiguity.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
Andi is unavailable for some time. So, I take over his work for this
mergewindow.
|
|
UGA is the EFI graphical output protocol that preceded GOP, and has been
long obsolete. Drop support for it from the x86 implementation of the
EFI stub - other architectures never bothered to implement it (save for
ia64)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The early_ioremap interface can fail and return NULL in certain cases. To
prevent NULL-pointer dereference crashes, fixed issues in the acpi_extlog
and copy_early_mem interfaces, improving robustness when handling early
memory.
Link: https://lkml.kernel.org/r/20241212101004.1544070-1-guoweikang.kernel@gmail.com
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch fully removes the mem_cgroup_{try, commit, cancel}_charge
functions, as well as their hugetlb variants.
Link: https://lkml.kernel.org/r/20241211203951.764733-4-joshua.hahnjy@gmail.com
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch introduces mem_cgroup_charge_hugetlb which combines the logic
of mem_cgroup_hugetlb_try_charge / mem_cgroup_hugetlb_commit_charge and
removes the need for mem_cgroup_hugetlb_cancel_charge. It also reduces
the footprint of memcg in hugetlb code and consolidates all memcg related
error paths into one.
Link: https://lkml.kernel.org/r/20241211203951.764733-3-joshua.hahnjy@gmail.com
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We no longer actually need to perform these checks in the f_op->mmap()
hook any longer.
We already moved the operation which clears VM_MAYWRITE on a read-only
mapping of a write-sealed memfd in order to work around the restrictions
imposed by commit 5de195060b2e ("mm: resolve faulty mmap_region() error
path behaviour").
There is no reason for us not to simply go ahead and additionally check to
see if any pre-existing seals are in place here rather than defer this to
the f_op->mmap() hook.
By doing this we remove more logic from shmem_mmap() which doesn't belong
there, as well as doing the same for hugetlbfs_file_mmap(). We also
remove dubious shared logic in mm.h which simply does not belong there
either.
It makes sense to do these checks at the earliest opportunity, we know
these are shmem (or hugetlbfs) mappings whose relevant VMA flags will not
change from the invoking do_mmap() so there is simply no need to wait.
This also means the implementation of further memfd seal flags can be done
within mm/memfd.c and also have the opportunity to modify VMA flags as
necessary early in the mapping logic.
[lorenzo.stoakes@oracle.com: fix typos in !memfd inline stub]
Link: https://lkml.kernel.org/r/7dee6c5d-480b-4c24-b98e-6fa47dbd8a23@lucifer.local
Link: https://lkml.kernel.org/r/20241206212846.210835-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jeff Xu <jeffxu@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add helper functions to speculatively perform operations without
read-locking mmap_lock, expecting that mmap_lock will not be
write-locked and mm is not modified from under us.
[akpm@linux-foundation.org: use read_seqcount_retry() in mmap_lock_speculate_retry(), per Wei Yang]
Link: https://lkml.kernel.org/r/20241122174416.1367052-3-surenb@google.com
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert mm_lock_seq to be seqcount_t and change all mmap_write_lock
variants to increment it, in-line with the usual seqcount usage pattern.
This lets us check whether the mmap_lock is write-locked by checking
mm_lock_seq.sequence counter (odd=locked, even=unlocked). This will be
used when implementing mmap_lock speculation functions.
As a result vm_lock_seq is also change to be unsigned to match the type
of mm_lock_seq.sequence.
Link: https://lkml.kernel.org/r/20241122174416.1367052-2-surenb@google.com
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add raw_seqcount_try_begin() to opens a read critical section of the given
seqcount_t if the counter is even. This enables eliding the critical
section entirely if the counter is odd, instead of doing the speculation
knowing it will fail.
Link: https://lkml.kernel.org/r/20241122174416.1367052-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, large folio swap-in is supported, but we lack a method to
analyze their success ratio. Similar to anon_fault_fallback, we introduce
per-order mTHP swpin_fallback and swpin_fallback_charge counters for
calculating their success ratio. The new counters are located at:
/sys/kernel/mm/transparent_hugepage/hugepages-<size>/stats/
swpin_fallback
swpin_fallback_charge
Link: https://lkml.kernel.org/r/20241202124730.2407037-1-haowenchao22@gmail.com
Signed-off-by: Wenchao Hao <haowenchao22@gmail.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Lance Yang <ioworker0@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now, if CONFIG_MMU_GATHER_RCU_TABLE_FREE is selected, the page table pages
will be freed by semi RCU, that is:
- batch table freeing: asynchronous free by RCU
- single table freeing: IPI + synchronous free
In this way, the page table can be lockless traversed by disabling IRQ in
paths such as fast GUP. But this is not enough to free the empty PTE page
table pages in paths other that munmap and exit_mmap path, because IPI
cannot be synchronized with rcu_read_lock() in pte_offset_map{_lock}().
In preparation for supporting empty PTE page table pages reclaimation, let
single table also be freed by RCU like batch table freeing. Then we can
also use pte_offset_map() etc to prevent PTE page from being freed.
Like pte_free_defer(), we can also safely use ptdesc->pt_rcu_head to free
the page table pages:
- The pt_rcu_head is unioned with pt_list and pmd_huge_pte.
- For pt_list, it is used to manage the PGD page in x86. Fortunately
tlb_remove_table() will not be used for free PGD pages, so it is safe
to use pt_rcu_head.
- For pmd_huge_pte, it is used for THPs, so it is safe.
After applying this patch, if CONFIG_PT_RECLAIM is enabled, the function
call of free_pte() is as follows:
free_pte
pte_free_tlb
__pte_free_tlb
___pte_free_tlb
paravirt_tlb_remove_table
tlb_remove_table [!CONFIG_PARAVIRT, Xen PV, Hyper-V, KVM]
[no-free-memory slowpath:]
tlb_table_invalidate
tlb_remove_table_one
__tlb_remove_table_one [frees via RCU]
[fastpath:]
tlb_table_flush
tlb_remove_table_free [frees via RCU]
native_tlb_remove_table [CONFIG_PARAVIRT on native]
tlb_remove_table [see above]
Link: https://lkml.kernel.org/r/0287d442a973150b0e1019cc406e6322d148277a.1733305182.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now in order to pursue high performance, applications mostly use some
high-performance user-mode memory allocators, such as jemalloc or
tcmalloc. These memory allocators use madvise(MADV_DONTNEED or MADV_FREE)
to release physical memory, but neither MADV_DONTNEED nor MADV_FREE will
release page table memory, which may cause huge page table memory usage.
The following are a memory usage snapshot of one process which actually
happened on our server:
VIRT: 55t
RES: 590g
VmPTE: 110g
In this case, most of the page table entries are empty. For such a PTE
page where all entries are empty, we can actually free it back to the
system for others to use.
As a first step, this commit aims to synchronously free the empty PTE
pages in madvise(MADV_DONTNEED) case. We will detect and free empty PTE
pages in zap_pte_range(), and will add zap_details.reclaim_pt to exclude
cases other than madvise(MADV_DONTNEED).
Once an empty PTE is detected, we first try to hold the pmd lock within
the pte lock. If successful, we clear the pmd entry directly (fast path).
Otherwise, we wait until the pte lock is released, then re-hold the pmd
and pte locks and loop PTRS_PER_PTE times to check pte_none() to re-detect
whether the PTE page is empty and free it (slow path).
For other cases such as madvise(MADV_FREE), consider scanning and freeing
empty PTE pages asynchronously in the future.
The following code snippet can show the effect of optimization:
mmap 50G
while (1) {
for (; i < 1024 * 25; i++) {
touch 2M memory
madvise MADV_DONTNEED 2M
}
}
As we can see, the memory usage of VmPTE is reduced:
before after
VIRT 50.0 GB 50.0 GB
RES 3.1 MB 3.1 MB
VmPTE 102640 KB 240 KB
[zhengqi.arch@bytedance.com: fix uninitialized symbol 'ptl']
Link: https://lkml.kernel.org/r/20241206112348.51570-1-zhengqi.arch@bytedance.com
Link: https://lore.kernel.org/linux-mm/224e6a4e-43b5-4080-bdd8-b0a6fb2f0853@stanley.mountain/
Link: https://lkml.kernel.org/r/92aba2b319a734913f18ba41e7d86a265f0b84e2.1733305182.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
re-installed
In some cases, we'll replace the none pte with an uffd-wp swap special pte
marker when necessary. Let's expose this information to the caller
through the return value, so that subsequent commits can use this
information to detect whether the PTE page is empty.
Link: https://lkml.kernel.org/r/9d4516554724eda87d6576468042a1741c475413.1733305182.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The parameter is unused, so let's stop passing it.
Link: https://lkml.kernel.org/r/20241203094732.200195-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Right now fs/exec.c invokes expand_downwards(), an otherwise internal
implementation detail of the VMA logic in order to ensure that an arg page
can be obtained by get_user_pages_remote().
In order to be able to move the stack expansion logic into mm/vma.c to
make it available to userland testing we need to find an alternative
approach here.
We do so by providing the mmap_read_lock_maybe_expand() function which
also helpfully documents what get_arg_page() is doing here and adds an
additional check against VM_GROWSDOWN to make explicit that the stack
expansion logic is only invoked when the VMA is indeed a downward-growing
stack.
This allows expand_downwards() to become a static function.
Importantly, the VMA referenced by mmap_read_maybe_expand() must NOT be
currently user-visible in any way, that is place within an rmap or VMA
tree. It must be a newly allocated VMA.
This is the case when exec invokes this function.
Link: https://lkml.kernel.org/r/5295d1c70c58e6aa63d14be68d4e1de9fa1c8e6d.1733248985.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CPU unplug first calls __cpu_disable(), and that's where powerpc calls
cleanup_cpu_mmu_context(), which clears this CPU from mm_cpumask() of all
mms in the system.
However this CPU may still be using a lazy tlb mm, and its mm_cpumask bit
will be cleared from it. The CPU does not switch away from the lazy tlb
mm until arch_cpu_idle_dead() calls idle_task_exit().
If that user mm exits in this window, it will not be subject to the lazy
tlb mm shootdown and may be freed while in use as a lazy mm by the CPU
that is being unplugged.
cleanup_cpu_mmu_context() could be moved later, but it looks better to
move the lazy tlb mm switching earlier. The problem with doing the lazy
mm switching in idle_task_exit() is explained in commit bf2c59fce4074
("sched/core: Fix illegal RCU from offline CPUs"), which added a wart to
switch away from the mm but leave it set in active_mm to be cleaned up
later.
So instead, switch away from the lazy tlb mm at sched_cpu_wait_empty(),
which is the last hotplug state before teardown
(CPUHP_AP_SCHED_WAIT_EMPTY). This CPU will never switch to a user thread
from this point, so it has no chance to pick up a new lazy tlb mm. This
removes the lazy tlb mm handling wart in CPU unplug.
With this, idle_task_exit() is not needed anymore and can be cleaned up.
This leaves the prototype alone, to be cleaned after this change.
herton: took the suggestions from https://lore.kernel.org/all/87jzvyprsw.ffs@tglx/
and made adjustments on the initial patch proposed by Nicholas.
Link: https://lkml.kernel.org/r/20230524060455.147699-1-npiggin@gmail.com
Link: https://lore.kernel.org/all/20230525205253.E2FAEC433EF@smtp.kernel.org/
Link: https://lkml.kernel.org/r/20241104142318.3295663-1-herton@redhat.com
Fixes: 2655421ae69f ("lazy tlb: shoot lazies, non-refcounting lazy tlb mm reference handling scheme")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
folio_add_wait_queue() has been unused since 2021's commit 850cba069c26
("cachefiles: Delete the cachefiles driver pending rewrite")
Remove it.
Link: https://lkml.kernel.org/r/20241116151446.95555-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The documentation for list_lru_add() and list_lru_del() has not been
updated since lru lists were originally introduced by commit a38e40824844
("list: add a new LRU list type"). Back then, list_lru stored all of the
items in a single list, but the implementation has since been expanded to
use many sublists internally.
Thus, update the docs to mention that the requirements about not using the
item with several lists at the same time also applies not using different
sublists. Also mention that list_lru items are reparented when the memcg
is deleted as discussed on the LKML [1].
Also fix incorrect use of 'Return value:' which should be 'Return:'.
Link: https://lore.kernel.org/all/Z0eXrllVhRI9Ag5b@dread.disaster.area/ [1]
Link: https://lkml.kernel.org/r/20241129-list_lru_memcg_docs-v2-1-e285ff1c481b@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Support large folios for tmpfs", v3.
Traditionally, tmpfs only supported PMD-sized large folios. However
nowadays with other file systems supporting any sized large folios, and
extending anonymous to support mTHP, we should not restrict tmpfs to
allocating only PMD-sized large folios, making it more special. Instead,
we should allow tmpfs can allocate any sized large folios.
Considering that tmpfs already has the 'huge=' option to control the
PMD-sized large folios allocation, we can extend the 'huge=' option to
allow any sized large folios. The semantics of the 'huge=' mount option
are:
huge=never: no any sized large folios
huge=always: any sized large folios
huge=within_size: like 'always' but respect the i_size
huge=advise: like 'always' if requested with madvise()
Note: for tmpfs mmap() faults, due to the lack of a write size hint, still
allocate the PMD-sized large folios if huge=always/within_size/advise is
set.
Moreover, the 'deny' and 'force' testing options controlled by
'/sys/kernel/mm/transparent_hugepage/shmem_enabled', still retain the same
semantics. The 'deny' can disable any sized large folios for tmpfs, while
the 'force' can enable PMD sized large folios for tmpfs.
This patch (of 6):
Factor out the order calculation into a new helper, which can be reused by
shmem in the following patch.
Link: https://lkml.kernel.org/r/cover.1732779148.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/5505f9ea50942820c1924d1803bfdd3a524e54f6.1732779148.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
