| Age | Commit message (Collapse) | Author |
|---|
|
Kthreads attached to a preferred NUMA node for their task structure
allocation can also be assumed to run preferrably within that same node.
A more precise affinity is usually notified by calling
kthread_create_on_cpu() or kthread_bind[_mask]() before the first wakeup.
For the others, a default affinity to the node is desired and sometimes
implemented with more or less success when it comes to deal with hotplug
events and nohz_full / CPU Isolation interactions:
- kcompactd is affine to its node and handles hotplug but not CPU Isolation
- kswapd is affine to its node and ignores hotplug and CPU Isolation
- A bunch of drivers create their kthreads on a specific node and
don't take care about affining further.
Handle that default node affinity preference at the generic level
instead, provided a kthread is created on an actual node and doesn't
apply any specific affinity such as a given CPU or a custom cpumask to
bind to before its first wake-up.
This generic handling is aware of CPU hotplug events and CPU isolation
such that:
* When a housekeeping CPU goes up that is part of the node of a given
kthread, the related task is re-affined to that own node if it was
previously running on the default last resort online housekeeping set
from other nodes.
* When a housekeeping CPU goes down while it was part of the node of a
kthread, the running task is migrated (or the sleeping task is woken
up) automatically by the scheduler to other housekeepers within the
same node or, as a last resort, to all housekeepers from other nodes.
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
When a kthread or any other task has an affinity mask that is fully
offline or unallowed, the scheduler reaffines the task to all possible
CPUs as a last resort.
This default decision doesn't mix up very well with nohz_full CPUs that
are part of the possible cpumask but don't want to be disturbed by
unbound kthreads or even detached pinned user tasks.
Make the fallback affinity setting aware of nohz_full.
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
NT waits can optionally be made "alertable". This is a special channel for
thread wakeup that is mildly similar to SIGIO. A thread has an internal single
bit of "alerted" state, and if a thread is alerted while an alertable wait, the
wait will return a special value, consume the "alerted" state, and will not
consume any of its objects.
Alerts are implemented using events; the user-space NT emulator is expected to
create an internal ntsync event for each thread and pass that event to wait
functions.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-16-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtQueryEvent().
This returns the signaled state of the event and whether it is manual-reset.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-15-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtQueryMutant().
This returns the recursion count, owner, and abandoned state of the mutex.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-14-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtQuerySemaphore().
This returns the current count and maximum count of the semaphore.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-13-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtPulseEvent().
This wakes up any waiters as if the event had been set, but does not set the
event, instead resetting it if it had been signalled. Thus, for a manual-reset
event, all waiters are woken, whereas for an auto-reset event, at most one
waiter is woken.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-12-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtResetEvent().
This sets the event to the unsignaled state, and returns its previous state.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-11-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtSetEvent().
This sets the event to the signaled state, and returns its previous state.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-10-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This correspond to the NT syscall NtCreateEvent().
An NT event holds a single bit of state denoting whether it is signaled or
unsignaled.
There are two types of events: manual-reset and automatic-reset. When an
automatic-reset event is acquired via a wait function, its state is reset to
unsignaled. Manual-reset events are not affected by wait functions.
Whether the event is manual-reset, and its initial state, are specified at
creation time.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-9-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This does not correspond to any NT syscall. Rather, when a thread dies, it
should be called by the NT emulator for each mutex, with the TID of the dying
thread.
NT mutexes are robust (in the pthread sense). When an NT thread dies, any
mutexes it owned are immediately released. Acquisition of those mutexes by other
threads will return a special value indicating that the mutex was abandoned,
like EOWNERDEAD returned from pthread_mutex_lock(), and EOWNERDEAD is indeed
used here for that purpose.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-8-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtReleaseMutant().
This syscall decrements the mutex's recursion count by one, and returns the
previous value. If the mutex is not owned by the current task, the function
instead fails and returns -EPERM.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-7-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to the NT syscall NtCreateMutant().
An NT mutex is recursive, with a 32-bit recursion counter. When acquired via
NtWaitForMultipleObjects(), the recursion counter is incremented by one. The OS
records the thread which acquired it.
The OS records the thread which acquired it. However, in order to keep this
driver self-contained, the owning thread ID is managed by user-space, and passed
as a parameter to all relevant ioctls.
The initial owner and recursion count, if any, are specified when the mutex is
created.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-6-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is similar to NTSYNC_IOC_WAIT_ANY, but waits until all of the objects are
simultaneously signaled, and then acquires all of them as a single atomic
operation.
Because acquisition of multiple objects is atomic, some complex locking is
required. We cannot simply spin-lock multiple objects simultaneously, as that
may disable preëmption for a problematically long time.
Instead, modifying any object which may be involved in a wait-all operation takes
a device-wide sleeping mutex, "wait_all_lock", instead of the normal object
spinlock.
Because wait-for-all is a rare operation, in order to optimize wait-for-any,
this lock is only taken when necessary. "all_hint" is used to mark objects which
are involved in a wait-for-all operation, and if an object is not, only its
spinlock is taken.
The locking scheme used here was written by Peter Zijlstra.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-5-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This corresponds to part of the functionality of the NT syscall
NtWaitForMultipleObjects(). Specifically, it implements the behaviour where
the third argument (wait_any) is TRUE, and it does not handle alertable waits.
Those features have been split out into separate patches to ease review.
This patch therefore implements the wait/wake infrastructure which comprises the
core of ntsync's functionality.
NTSYNC_IOC_WAIT_ANY is a vectored wait function similar to poll(). Unlike
poll(), it "consumes" objects when they are signaled. For semaphores, this means
decreasing one from the internal counter. At most one object can be consumed by
this function.
This wait/wake model is fundamentally different from that used anywhere else in
the kernel, and for that reason ntsync does not use any existing infrastructure,
such as futexes, kernel mutexes or semaphores, or wait_event().
Up to 64 objects can be waited on at once. As soon as one is signaled, the
object with the lowest index is consumed, and that index is returned via the
"index" field.
A timeout is supported. The timeout is passed as a u64 nanosecond value, which
represents absolute time measured against either the MONOTONIC or REALTIME clock
(controlled by the flags argument). If U64_MAX is passed, the ioctl waits
indefinitely.
This ioctl validates that all objects belong to the relevant device. This is not
necessary for any technical reason related to NTSYNC_IOC_WAIT_ANY, but will be
necessary for NTSYNC_IOC_WAIT_ALL introduced in the following patch.
Some padding fields are added for alignment and for fields which will be added
in future patches (split out to ease review).
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-4-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the more common "release" terminology, which is also the term used by NT,
instead of "post" (which is used by POSIX).
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-3-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify the user API a bit by returning the fd as return value from the ioctl
instead of through the argument pointer.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-2-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
IOCTL_VMCI_SOCKETS_VERSION and IOCTL_VMCI_SOCKETS_GET_AF_VALUE were
never implemented, because VSOCK ended up being implemented as a
generic mechanism with a static AF value. Likewise,
IOCTL_VMCI_SOCKETS_GET_LOCAL_CID ended up being implemented as
IOCTL_VM_SOCKETS_GET_LOCAL_CID.
This isn't a UAPI header, so it should be fine to remove the unused
values. I've left a comment noting IOCTL_VM_SOCKETS_GET_LOCAL_CID is
in the VMCI range to avoid unintentional reuse.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Acked-by: Vishnu Dasa <vishnu.dasa@broadcom.com>
Link: https://lore.kernel.org/r/fzdcrz4yfedokmbm22h2iwsluix4jwejwaltuwcdr6kz3yu6eu@nue5xc6ayevo
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sometimes one needs to be able not only to catch PPS signals but to
produce them also. For example, running a distributed simulation,
which requires computers' clock to be synchronized very tightly.
This patch adds PPS generators class in order to have a well-defined
interface for these devices.
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/20241108073115.759039-2-giometti@enneenne.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This helps several of my boards in CI.
|
|
Dual-license the vduse kernel header file to dual
GPL-2.0 OR BSD-3-Clause license to make it possible
to ship it with DPDK (under BSD-3-Clause) for older
distros.
Signed-off-by: Yongji Xie <xieyongji@bytedance.com>
Message-Id: <20241119074238.38299-1-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This definition is in the wrong file; it is part of the TLFS doc.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1732577084-2122-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1732577084-2122-2-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Add master/slave ids for Qualcomm IPQ5424 Network-On-Chip
interfaces. This will be used by the gcc-ipq5424 driver
for providing interconnect services using the icc-clk framework.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213105808.674620-1-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SM6115 (and its derivatives or similar SoCs) has an LPASS clock
controller block which provides audio-related resets.
Add bindings for it.
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[alexey.klimov slightly changed the commit message]
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20241212002551.2902954-2-alexey.klimov@linaro.org
[bjorn: Adjusted Konrad's address]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While merging net to net-next I noticed that the kdoc above
__vlan_get_protocol_offset() has the wrong function name.
Fix that and all the other kdoc warnings in this file.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250106174620.1855269-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The get_mac_eee() is no longer called by the core DSA code, nor are
there any implementations of this method. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllU-007UzL-KV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit d7811e623dd4 ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-01-07
We've added 7 non-merge commits during the last 32 day(s) which contain
a total of 11 files changed, 190 insertions(+), 103 deletions(-).
The main changes are:
1) Migrate the test_xdp_meta.sh BPF selftest into test_progs
framework, from Bastien Curutchet.
2) Add ability to configure head/tailroom for netkit devices,
from Daniel Borkmann.
3) Fixes and improvements to the xdp_hw_metadata selftest,
from Song Yoong Siang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Extend netkit tests to validate set {head,tail}room
netkit: Add add netkit {head,tail}room to rt_link.yaml
netkit: Allow for configuring needed_{head,tail}room
selftests/bpf: Migrate test_xdp_meta.sh into xdp_context_test_run.c
selftests/bpf: test_xdp_meta: Rename BPF sections
selftests/bpf: Enable Tx hwtstamp in xdp_hw_metadata
selftests/bpf: Actuate tx_metadata_len in xdp_hw_metadata
====================
Link: https://patch.msgid.link/20250107130908.143644-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add support for more sizes and then update
the rt722 driver to use the new support. We also add support for
the deferring feature of MBQs to allow hardware to indicate it is
not currently ready to service a read/write.
Afraid I don't have hardware to test the rt722 change so it is
only build tested, but I thought it good to include a change to
demonstrate the new features in use.
|
|
There are no more board file users of this driver. The platform data
structure is only used internally. Two of the four fields it stores are
not used at all anymore. Pull the remainder into the driver data struct
and shrink code by removing parts that are now dead code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241211102337.37956-1-brgl@bgdev.pl
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The SDCA specification allows for controls to be deferred. In the case
of a deferred control the device will return COMMAND_IGNORED to the
8-bit operation that would cause the value to commit. Which is the
final 8-bits on a write, or the first 8-bits on a read. In the case of
receiving a defer, the regmap will poll the SDCA function busy bit,
after which the transaction will be retried, returning an error if the
function busy does not clear within a chip specific timeout. Since
this is common SDCA functionality which is the 99% use-case for MBQs
it makes sense to incorporate this functionality into the register
map. If no MBQ configuration is specified, the behaviour will default
to the existing behaviour.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-5-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SoundWire MBQ register maps typically contain a variety of register
sizes, which doesn't map ideally to the regmap abstraction which
expects register maps to have a consistent size. Currently the MBQ
register map only allows 16-bit registers to be defined, however
this leads to complex CODEC driver implementations with an 8-bit
register map and a 16-bit MBQ, every control will then have a custom
get and put handler that allows them to access different register
maps. Further more 32-bit MBQ quantities are not currently supported.
Add support for additional MBQ sizes and to avoid the complexity
of multiple register maps treat the val_size as a maximum size for
the register map. Within the regmap use an ancillary callback to
determine how many bytes to actually read/write to the hardware for
a specific register. In the case that no callback is defined the
behaviour defaults back to the existing behaviour of a fixed size
register map.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-4-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the list of entity_0 controls to better match version v1.0 of the
SDCA specification. Remove both INTSTAT_CLEAR and INT_ENABLE as these are
no longer used, and add some missing controls and bits into the enum. Also
rename the SDCA_CONTROL prefix to SDCA_CTL because this better matches the
macros in the sdw_registers.h header, and the names can get quite long so
saving a few characters is definitely a plus.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Compliment the existing macro to construct an SDCA control address
with macros to extract the constituent parts, and validation of such
an address. Also update the masks for the original macro to use
GENMASK to make mental comparisons with the included comment on the
address format easier.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-2-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Secure TSC in SNP-enabled guests. Secure TSC allows guests
to securely use RDTSC/RDTSCP instructions, ensuring that the parameters used
cannot be altered by the hypervisor once the guest is launched.
Secure TSC-enabled guests need to query TSC information from the AMD Security
Processor. This communication channel is encrypted between the AMD Security
Processor and the guest, with the hypervisor acting merely as a conduit to
deliver the guest messages to the AMD Security Processor. Each message is
protected with AEAD (AES-256 GCM).
[ bp: Zap a stray newline over amd_cc_platform_has() while at it,
simplify CC_ATTR_GUEST_SNP_SECURE_TSC check ]
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-6-nikunj@amd.com
|
|
Add poll syscall support on the `hist` file. The Waiter will be waken
up when the histogram is updated with POLLIN.
Currently, there is no way to wait for a specific event in userspace.
So user needs to peek the `trace` periodicaly, or wait on `trace_pipe`.
But it is not a good idea to peek at the `trace` for an event that
randomly happens. And `trace_pipe` is not coming back until a page is
filled with events.
This allows a user to wait for a specific event on the `hist` file. User
can set a histogram trigger on the event which they want to monitor
and poll() on its `hist` file. Since this poll() returns POLLIN, the next
poll() will return soon unless a read() happens on that hist file.
NOTE: To read the hist file again, you must set the file offset to 0,
but just for monitoring the event, you may not need to read the
histogram.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527247756.464571.14236296701625509931.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug
logging in case the passed in link rate or lane count are zero. There's
no further error checking as such, and the function returns 0.
There should be no case where the parameters are zero. The returned
value is generally used as a divisor, and if we were hitting this, we'd
be seeing division by zero.
Just remove the debug logging altogether, along with the mgr parameter,
so that the function can be used in non-MST contexts without the
topology manager.
v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com
|
|
Backmerge to get the DRM DP payload and ACT helpers to drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add the missing "RENESAS" part to the include guard.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/34953d1e9f472e4f29533ed06cf092dd3c0d1178.1736238939.git.geert+renesas@glider.be
|
|
As there is only one in-tree user, avoid a transition phase and switch
that user in the same commit. As there are some interdependencies
between the constness of the different symbols in the s390 driver,
covert the whole driver at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241205-sysfs-const-bin_attr-groups_macro-v1-1-ac5e855031e8@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Core Changes:
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc]
Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
|
|
Add an io-pgtable method to walk the pgtable returning the raw PTEs that
would be traversed for a given iova access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241210165127.600817-4-robdclark@gmail.com
[will: Removed 'arm_lpae_io_pgtable_walk_data::level' per Mostafa]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On a board running ntpd and gpsd, I'm seeing a consistent use-after-free
in sys_exit() from gpsd when rebooting:
pps pps1: removed
------------[ cut here ]------------
kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150
CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1
Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kobject_put+0x120/0x150
lr : kobject_put+0x120/0x150
sp : ffffffc0803d3ae0
x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001
x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440
x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600
x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20
x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
kobject_put+0x120/0x150
cdev_put+0x20/0x3c
__fput+0x2c4/0x2d8
____fput+0x1c/0x38
task_work_run+0x70/0xfc
do_exit+0x2a0/0x924
do_group_exit+0x34/0x90
get_signal+0x7fc/0x8c0
do_signal+0x128/0x13b4
do_notify_resume+0xdc/0x160
el0_svc+0xd4/0xf8
el0t_64_sync_handler+0x140/0x14c
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837e6 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
pps_core: source serial1 got cdev (251:1)
<...>
pps pps1: removed
pps_core: unregistering pps1
pps_core: deallocating pps1
Fixes: d953e0e837e6 ("pps: Fix a use-after free bug when unregistering a source.")
Cc: stable@vger.kernel.org
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add an adreno-smmu-priv interface for drm/msm to call into arm-smmu-qcom
and initiate the "Partially Resident Region" (PRR) bit setup or reset
sequence as per request.
This will be used by GPU to setup the PRR bit and related configuration
registers through adreno-smmu private interface instead of directly
poking the smmu hardware.
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
Link: https://lore.kernel.org/r/20241212151402.159102-4-quic_bibekkum@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
rtnl_lock_killable() is used only in register_netdev()
and will be converted to per-netns RTNL.
Let's unexport it and add the corresponding helper.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Having cec.h include linux/debugfs.h leads to all users of all cec
headers include and depend on debugfs.h and its dependencies for no
reason. Drop the include from cec.h, and include debugfs.h and
seq_file.h where needed.
Sort all the modified include lists while at it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The GCC_XO_CLK is required for the functionality of the WiFi
copy engine block. Therefore, add the GCC_XO_CLK macro.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241210064110.130466-2-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
xpcs_get_interfaces() should no longer be used outside of the XPCS
code, so make it static.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tTffk-007Roi-JM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the PCS to specify which interfaces it supports, which
can be used by MAC drivers to build the main supported_interfaces
bitmap. Phylink also validates that the PCS returned by the MAC driver
supports the interface that the MAC was asked for.
An empty supported_interfaces bitmap from the PCS indicates that it
does not provide this information, and we handle that appropriately.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tTffL-007RoD-1Y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The gcc_apss_dbg clk is access protected by trust zone, and accessing
it results in a kernel crash. Therefore remove the gcc_apss_dbg_clk macro.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20241217113909.3522305-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
