| Age | Commit message (Collapse) | Author |
|---|
|
The Source can drop its output voltage to the minimum of the requested
PPS APDO voltage range when it is in Current Limit Mode. If this voltage
falls within the range of vPpsShutdown, the Source initiates a Hard
Reset and discharges Vbus. However, currently the Sink may disconnect
before the voltage reaches vPpsShutdown, leading to unexpected behavior.
Prevent premature disconnection by setting the Sink's disconnect
threshold to the minimum vPpsShutdown value. Additionally, consider the
voltage drop due to IR drop when calculating the appropriate threshold.
This ensures a robust and reliable interaction between the Source and
Sink during SPR PPS Current Limit Mode operation.
Fixes: 4288debeaa4e ("usb: typec: tcpci: Fix up sink disconnect thresholds for PD")
Cc: stable <stable@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250114142435.2093857-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
* kvm-arm64/pkvm-memshare-declutter:
: .
: pKVM memory transition simplifications, courtesy of Quentin Perret.
:
: From the cover letter:
: "Since its early days, pKVM has formalized memory 'transitions' (shares
: and donations) using 'struct pkvm_mem_transition' and bunch of helpers
: to manipulate it. The intention was for all transitions to use this
: machinery to ensure we're checking things consistently. However, as
: development progressed, it became clear that the rigidity of this model
: made it really difficult to use in some use-cases which ended-up
: side-stepping it entirely. That is the case for the
: hyp_{un}pin_shared_mem() and host_{un}share_guest() paths upstream which
: use lower level helpers directly, as well as for several other pKVM
: features that should land upstream in the future (ex: when a guest
: relinquishes a page during ballooning, when annotating a page that is
: being DMA'd to, ...). On top of this, the pkvm_mem_transition machinery
: requires a lot of boilerplate which makes the code hard to read, but
: also adds layers of indirection that no compilers seems to see through,
: hence leading to suboptimal generated code.
:
: Given all the above, this series removes the pkvm_mem_transition
: machinery from mem_protect.c, and converts all its users to use
: __*_{check,set}_page_state_range() low-level helpers directly."
: .
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-timers:
: .
: Nested Virt support for the EL2 timers. From the initial cover letter:
:
: "Here's another batch of NV-related patches, this time bringing in most
: of the timer support for EL2 as well as nested guests.
:
: The code is pretty convoluted for a bunch of reasons:
:
: - FEAT_NV2 breaks the timer semantics by redirecting HW controls to
: memory, meaning that a guest could setup a timer and never see it
: firing until the next exit
:
: - We go try hard to reflect the timer state in memory, but that's not
: great.
:
: - With FEAT_ECV, we can finally correctly emulate the virtual timer,
: but this emulation is pretty costly
:
: - As a way to make things suck less, we handle timer reads as early as
: possible, and only defer writes to the normal trap handling
:
: - Finally, some implementations are badly broken, and require some
: hand-holding, irrespective of NV support. So we try and reuse the NV
: infrastructure to make them usable. This could be further optimised,
: but I'm running out of patience for this sort of HW.
:
: [...]"
: .
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Document EL2 timer API
KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity
KVM: arm64: nv: Sanitise CNTHCTL_EL2
KVM: arm64: nv: Propagate CNTHCTL_EL2.EL1NV{P,V}CT bits
KVM: arm64: nv: Add trap routing for CNTHCTL_EL2.EL1{NVPCT,NVVCT,TVT,TVCT}
KVM: arm64: Handle counter access early in non-HYP context
KVM: arm64: nv: Accelerate EL0 counter accesses from hypervisor context
KVM: arm64: nv: Accelerate EL0 timer read accesses when FEAT_ECV in use
KVM: arm64: nv: Use FEAT_ECV to trap access to EL0 timers
KVM: arm64: nv: Publish emulated timer interrupt state in the in-memory state
KVM: arm64: nv: Sync nested timer state with FEAT_NV2
KVM: arm64: nv: Add handling of EL2-specific timer registers
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
'rockchip', 'riscv', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
|
|
Add EEE management to phylink, making use of the phylib implementation.
This will only be used where a MAC driver populates the methods and
capabilities bitfield, otherwise we keep our old behaviour.
Phylink will keep track of the EEE configuration, including the clock
stop abilities at each end of the MAC to PHY link, programming the PHY
appropriately and preserving the LPI configuration should the PHY go
away.
Phylink will call into the MAC driver when LPI needs to be enabled or
disabled, with the requirement that the MAC have LPI disabled prior
to the netdev being brought up (in other words, it will only call
mac_disable_tx_lpi() if it has already called mac_enable_tx_lpi().)
Support for phylink managed EEE is enabled by populating both tx_lpi
MAC operations method pointers, and filling in both LPI interfaces
and capabilities. If the methods are provided but the LPI interfaces
or capabilities remain empty, this indicates to phylink that EEE is
implemented by the driver but the hardware it is driving does not
support EEE, and thus the ethtool set_eee() and get_eee() methods will
return EOPNOTSUPP.
No validation of the LPI timer value is performed by this patch.
For interface modes which do not support LPI, we make no attempt to
manipulate the phylib EEE advertisement, but instead refuse to
activate LPI at the MAC, noting it at debug message level.
We also restrict the advertisement and reported userspace support
linkmode masks according to the lpi_capabilities provided to
phylink by the MAC driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADq-0014Pn-J1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for querying whether the PHY allows the transmit xMII clock
to be stopped while in LPI mode. This will be used by phylink to pass
to the MAC driver so it can configure the generation of the xMII clock
appropriately.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADg-0014Pb-AJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a definition for the clock stop capable bit in the PCS MMD. This
bit indicates whether the MAC is able to stop the transmit xMII clock
while it is signalling LPI.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADb-0014PV-6T@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BCM2712 has an extra clock exposed by the firmware called DISP, and used
by (at least) the HVS. Let's add it to the list of clocks to register in
Linux.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-5-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add devl guard for scoped_guard().
Example usage:
scoped_guard(devl, priv_to_devlink(pf)) {
err = init_devlink(pf);
if (err)
return err;
}
Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This patch enables to update a selected component from PLDM image
containing multiple components.
Example usage:
struct pldmfw;
data.mode = PLDMFW_UPDATE_MODE_SINGLE_COMPONENT;
data.compontent_identifier = DRIVER_FW_MGMT_COMPONENT_ID;
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc8).
Conflicts:
drivers/net/ethernet/realtek/r8169_main.c
1f691a1fc4be ("r8169: remove redundant hwmon support")
152d00a91396 ("r8169: simplify setting hwmon attribute visibility")
https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command")
f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref")
drivers/net/ethernet/intel/ice/ice_type.h
50327223a8bb ("ice: add lock to protect low latency interface")
dc26548d729e ("ice: Fix quad registers read on E825")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pcie_read_tlp_log() handles only 4 Header Log DWORDs but TLP Prefix Log
(PCIe r6.1 secs 7.8.4.12 & 7.9.14.13) may also be present.
Generalize pcie_read_tlp_log() and struct pcie_tlp_log to also handle TLP
Prefix Log. The relevant registers are formatted identically in AER and DPC
Capability, but has these variations:
a) The offsets of TLP Prefix Log registers vary.
b) DPC RP PIO TLP Prefix Log register can be < 4 DWORDs.
c) AER TLP Prefix Log Present (PCIe r6.1 sec 7.8.4.7) can indicate Prefix
Log is not present.
Therefore callers must pass the offset of the TLP Prefix Log register and
the entire length to pcie_read_tlp_log() to be able to read the correct
number of TLP Prefix DWORDs from the correct offset.
Link: https://lore.kernel.org/r/20250114170840.1633-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash ternary fix from
https://lore.kernel.org/r/20250116172019.88116-1-colin.i.king@gmail.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Notably this includes fixes for a few regressions spotted very
recently. No known outstanding ones.
Current release - regressions:
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in
ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth:
- bnxt: always recalculate features after XDP clearing, fix
null-deref
- mlx5: fix sub-function add port error handling
- fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth:
- ice: fix E825 initialization
- mlx5e: fix inversion dependency warning while enabling IPsec
tunnel
- gtp: destroy device along with udp socket's netns dismantle.
- xilinx: axienet: Fix IRQ coalescing packet count overflow"
* tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netdev: avoid CFI problems with sock priv helpers
net/mlx5e: Always start IPsec sequence number from 1
net/mlx5e: Rely on reqid in IPsec tunnel mode
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
net/mlx5: Clear port select structure when fail to create
net/mlx5: SF, Fix add port error handling
net/mlx5: Fix a lockdep warning as part of the write combining test
net/mlx5: Fix RDMA TX steering prio
net: make page_pool_ref_netmem work with net iovs
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
net: fec: handle page_pool_dev_alloc_pages error
net: netpoll: ensure skb_pool list is always initialized
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
selftests: mptcp: avoid spurious errors on disconnect
mptcp: fix spurious wake-up on under memory pressure
mptcp: be sure to send ack when mptcp-level window re-opens
...
|
|
Add a `probe` callback to platform_profile_ops, which lets drivers
initialize the choices member manually. This is a step towards
unexposing the struct platform_profile_handler from the consumer
drivers.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-6-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Replace *profile_get and *profile_set members with a general *ops
member.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-5-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices can now set drvdata to the class device, thus passing the
platform_profile_handler to callbacks is unnecessary. Instead pass the
class device.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-4-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add *drvdata to platform_profile_register() signature and assign it to
the class device.
While at it, pass specific driver state as drvdata to replace uses of
container_of() with dev_get_drvdata().
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Instead of holding a reference to the class device, embed it the
platform_profile_handler. This involves manually creating and
registering the device and replacing dev_get_drvdata() with the newly
created to_pprof_handler() macro.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-2-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.14
This adds support for the new Snapdragon 8 Elite platform with MTP and
QRD boards, QCS615 platform with the Ride board, QCS8300 platform with
its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform
with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2
Gen1 Smart Viewer Development Kit.
On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added.
The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit
2023 are introduced.
IPQ9574 gains PCIe and TRNG descriptions, together with a few other
smaller improvements. TRNG is also enabled on the IPQ5332 platform.
On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB
interrupts are corrected.
On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development
kit gains description of the onboard LEDs.
On QRB4210 RB2 support for HDMI audio playback is added.
SA8775P gains missing clock controllers, CPUs are tied to PSCI power
domains, DisplayPort is introduced and enabled on the Ride board.
On SDM670 the GPU components are described and enabled for Google Pixel
3a, together with camera clock controller and flash LED.
Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled.
"global" IRQ for PCIe RC controllers are described on SM8550 and SM8650,
to allow for hotplug events.
Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615,
and QCS8300.
The X Elite platform gains QUP power domains and OPPs, another PCIe
controller, another UART, and its SDHCI controllers. The ASUS Vivobook S
15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains
audio configuration, SD card reader support, and USB retimers. The
Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains
retimers described. The Lenovo Thinkpad T14s has additional USB ports
enabled, as well as sound and fingerprint sensor.
USB U1/U2 entry is disabled across a variety of platforms, to improve
USB stability.
sleep clock frequencies are reviewed and corrected for a variety of
platforms, so is also various remoteproc mmio address ranges.
* tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits)
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
arm64: dts: qcom: ipq5424: add scm node
arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts
arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts
arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts
arm64: dts: qcom: qcs8300-ride: Enable USB controllers
arm64: dts: qcom: qcs8300: Add support for usb nodes
arm64: dts: qcom: qcs8300: Add support for clock controllers
arm64: dts: qcom: sm8450: Add coresight nodes
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
arm64: dts: qcom: qcs615-ride: Enable UFS node
arm64: dts: qcom: qcs615: add UFS node
arm64: dts: qcom: ipq5424: Add USB controller and phy nodes
...
Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.14
- Add support for DMA engine and audio codec on F1C100s
and enable audio codec on Lichee Pi Nano
- Add syscon and SRAM nodes for A100
- Enable CPU DVFS for Tanix TX1
- Explicitly configure TCON0 pixel clock parent according to display
output used
This includes one commit shared with the clock tree
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
which adds the macros for the TCON0 pixel clock parents.
* tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
arm64: dts: allwinner: h313: enable DVFS for Tanix TX1
arm64: dts: allwinner: a100: Add syscon nodes
dt-bindings: sram: sunxi-sram: Add A100 compatible
ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
ARM: dts: suniv: f1c100s: Add support for Audio Codec
ARM: dts: suniv: f1c100s: Add support for DMA
Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.14 (take two)
- Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC
Carrier-II EVK development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V4H SoC,
- Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
arm64: dts: renesas: r8a779g0: Add VSPX instances
arm64: dts: renesas: r8a779g0: Add FCPVX instances
arm64: dts: renesas: r9a09g047e57-smarc: Add SCIF pincontrol
arm64: dts: renesas: r9a09g047: Add pincontrol node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros
dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
Link: https://lore.kernel.org/r/cover.1736180859.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Pull interconnect changes from Georgi:
interconnect changes for 6.14
This pull request contains the interconnect changes for the 6.14-rc1 merge
window. It contains one new driver and DT documentation updates for L3
and bandwidth monitors.
Driver changes:
- New driver for the SM8750 platform
- Add DT compatibles for QCS615 BWMON and SM8650 OSM
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
interconnect: qcom: Add interconnect provider driver for SM8750
dt-bindings: interconnect: add interconnect bindings for SM8750
|
|
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ]
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241220134421.3809834-1-koichiro.den@canonical.com
|
|
Add a helper to initialize the lockdep, that is initialize the spinlock
and set a value. Having to open code them isn't a big deal, but having
an initializer feels right for a proper primitive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-6-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Drop the superfluous externs from the remaining prototypes in lockref.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-5-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace int used as bool with the actual bool type for return values that
can only be true or false.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-4-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
lockref_put_not_zero is not used anywhere, and unless I'm missing
something didn't end up being used used at all. Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250115094702.504610-2-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix the return type of do_mount() function from long to int to match its ac
tual behavior. The function only returns int values, and all callers, inclu
ding those in fs/namespace.c and arch/alpha/kernel/osf_sys.c, already treat
the return value as int. This change improves type consistency across the
filesystem code and aligns the function signature with its existing impleme
ntation and usage.
Signed-off-by: Sentaro Onizuka <sentaro@amazon.com>
Link: https://lore.kernel.org/r/20250113151400.55512-1-sentaro@amazon.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The new ASUS ProArt 16" laptop series come with their keyboards stuck in
an Out-Of-Box-Experience mode. While in this mode most functions will
not work such as LED control or Fn key combos. The correct init sequence
is now done to disable this OOBE.
This patch addresses only the ProArt series so far and it is unknown if
there may be others, in which case a new quirk may be required.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Connor Belli <connorbelli2003@gmail.com>
Signed-off-by: Connor Belli <connorbelli2003@gmail.com>
Tested-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Eric Dumazet says:
====================
net: reduce RTNL pressure in unregister_netdevice()
One major source of RTNL contention resides in unregister_netdevice()
Due to RCU protection of various network structures, and
unregister_netdevice() being a synchronous function,
it is calling potentially slow functions while holding RTNL.
I think we can release RTNL in two points, so that three
slow functions are called while RTNL can be used
by other threads.
v1: https://lore.kernel.org/netdev/20250107130906.098fc8d6@kernel.org/T/#m398c95f5778e1ff70938e079d3c4c43c050ad2a6
====================
Link: https://patch.msgid.link/20250114205531.967841-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cleanup_net() is the single thread responsible
for netns dismantles, and a serious bottleneck.
Before we can get per-netns RTNL, make sure
all synchronize_net() called from this thread
are using rcu_synchronize_expedited().
v3: deal with CONFIG_NET_NS=n
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250114205531.967841-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect the following members of netdev and napi by netdev_lock:
- defer_hard_irqs,
- gro_flush_timeout,
- irq_suspend_timeout.
The first two are written via sysfs (which this patch switches
to new lock), and netdev genl which holds both netdev and rtnl locks.
irq_suspend_timeout is only written by netdev genl.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Take netdev_lock() in netif_napi_set_irq(). All NAPI "control fields"
are now protected by that lock (most of the other ones are set during
napi add/del). The napi_hash_node is fully protected by the hash
spin lock, but close enough for the kdoc...
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that NAPI instances can't come and go without holding
netdev->lock we can trivially switch from rtnl_lock() to
netdev_lock() for setting netdev->threaded via sysfs.
Note that since we do not lock netdev_lock around sysfs
calls in the core we don't have to "trylock" like we do
with rtnl_lock.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap napi_enable() / napi_disable() with netdev_lock().
Provide the "already locked" flavor of the API.
iavf needs the usual adjustment. A number of drivers call
napi_enable() under a spin lock, so they have to be modified
to take netdev_lock() first, then spin lock then call
napi_enable_locked().
Protecting napi_enable() implies that napi->napi_id is protected
by netdev_lock().
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # via-velocity
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hold netdev->lock when NAPIs are getting added or removed.
This will allow safe access to NAPI instances of a net_device
without rtnl_lock.
Create a family of helpers which assume the lock is already taken.
Switch iavf to them, as it makes extensive use of netdev->lock,
already.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some uAPI (netdev netlink) hide net_device's sub-objects while
the interface is down to ensure uniform behavior across drivers.
To remove the rtnl_lock dependency from those uAPIs we need a way
to safely tell if the device is down or up.
Add an indication of whether device is open or closed, protected
by netdev->lock. The semantics are the same as IFF_UP, but taking
netdev_lock around every write to ->flags would be a lot of code
churn.
We don't want to blanket the entire open / close path by netdev_lock,
because it will prevent us from applying it to specific structures -
core helpers won't be able to take that lock from any function
called by the drivers on open/close paths.
So the state of the flag is "pessimistic", as in it may report false
negatives, but never false positives.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect writes to netdev->reg_state with netdev_lock().
From now on holding netdev_lock() is sufficient to prevent
the net_device from getting unregistered, so code which
wants to hold just a single netdev around no longer needs
to hold rtnl_lock.
We do not protect the NETREG_UNREGISTERED -> NETREG_RELEASED
transition. We'd need to move mutex_destroy(netdev->lock)
to .release, but the real reason is that trying to stop
the unregistration process mid-way would be unsafe / crazy.
Taking references on such devices is not safe, either.
So the intended semantics are to lock REGISTERED devices.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers for locking the netdev instance, use it in drivers
and the shaper code. This will make grepping for the lock usage
much easier, as we extend the lock to cover more fields.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250115035319.559603-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_ref_netmem() should work with either netmem representation, but
currently it casts to a page with netmem_to_page(), which will fail with
net iovs. Use netmem_get_pp_ref_count_ref() instead.
Fixes: 8ab79ed50cf1 ("page_pool: devmem support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/20250108220644.3528845-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The patch converts st,stm32-rcc.txt to the JSON schema, but it does more
than that. The old bindings, in fact, only covered the stm32f{4,7}
platforms and not the stm32h7. Therefore, to avoid patch submission tests
failing, it was necessary to add the corresponding compatible (i. e.
st,stm32h743-rcc) and specify that, in this case, 3 are the clocks instead
of the 2 required for the stm32f{4,7} platforms.
Additionally, the old bindings made no mention of the st,syscfg property,
which is used by both the stm32f{4,7} and the stm32h7 platforms.
The patch also fixes the files referencing to the old st,stm32-rcc.txt.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114182021.670435-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Following fields of 'struct mr_mfc' can be updated
concurrently (no lock protection) from ip_mr_forward()
and ip6_mr_forward()
- bytes
- pkt
- wrong_if
- lastuse
They also can be read from other functions.
Convert bytes, pkt and wrong_if to atomic_long_t,
and use READ_ONCE()/WRITE_ONCE() for lastuse.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250114221049.1190631-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hds-thresh option configures the threshold value of
the header-data-split.
If a received packet size is larger than this threshold value, a packet
will be split into header and payload.
The header indicates TCP and UDP header, but it depends on driver spec.
The bnxt_en driver supports HDS(Header-Data-Split) configuration at
FW level, affecting TCP and UDP too.
So, If hds-thresh is set, it affects UDP and TCP packets.
Example:
# ethtool -G <interface name> hds-thresh <value>
# ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256
# ethtool -g enp14s0f0np0
Ring parameters for enp14s0f0np0:
Pre-set maximums:
...
HDS thresh: 1023
Current hardware settings:
...
TCP data split: on
HDS thresh: 256
The default/min/max values are not defined in the ethtool so the drivers
should define themself.
The 0 value means that all TCP/UDP packets' header and payload
will be split.
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When tcp-data-split is UNKNOWN mode, drivers arbitrarily handle it.
For example, bnxt_en driver automatically enables if at least one of
LRO/GRO/JUMBO is enabled.
If tcp-data-split is UNKNOWN and LRO is enabled, a driver returns
ENABLES of tcp-data-split, not UNKNOWN.
So, `ethtool -g eth0` shows tcp-data-split is enabled.
The problem is in the setting situation.
In the ethnl_set_rings(), it first calls get_ringparam() to get the
current driver's config.
At that moment, if driver's tcp-data-split config is UNKNOWN, it returns
ENABLE if LRO/GRO/JUMBO is enabled.
Then, it sets values from the user and driver's current config to
kernel_ethtool_ringparam.
Last it calls .set_ringparam().
The driver, especially bnxt_en driver receives
ETHTOOL_TCP_DATA_SPLIT_ENABLED.
But it can't distinguish whether it is set by the user or just the
current config.
When user updates ring parameter, the new hds_config value is updated
and current hds_config value is stored to old_hdsconfig.
Driver's .set_ringparam() callback can distinguish a passed
tcp-data-split value is came from user explicitly.
If .set_ringparam() is failed, hds_config is rollbacked immediately.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-2-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add POWER_SUPPLY_HEALTH_UNDERVOLTAGE status for power supply
to report under voltage lockout failures.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250108-starqltechn_integration_upstream-v14-1-f6e84ec20d96@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Pass the current neg_mode into phylink_mii_c22_pcs_get_state() and
phylink_mii_c22_pcs_decode_state(). Update all users of phylink PCS
that use these functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeY-000Et9-8g@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current neg_mode into the .pcs_get_state() method. Update all
users of phylink PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeT-000Et3-4L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When adding the new debugfs entry, its kdoc equivalent was forgotten.
Add it now.
Fixes: d06905d68610 ("i2c: add core-managed per-client directory in debugfs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20250115163146.6c48f066@canb.auug.org.au
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
In order to let host controller drivers using the host-generic
infrastructure use the {en,dis}able_device() callbacks that can be used to
configure sideband RID mapping hardware, provide these two callbacks as
part of the pci_ecam_ops structure.
Link: https://lore.kernel.org/r/20241204150145.800408-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Now that x86 is converted over to use the IRQCHIP_MOVE_DEFERRED flags,
remove IRQ*_MOVE_PCNTXT and related code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241210103335.626707225@linutronix.de
|
