| Age | Commit message (Collapse) | Author |
|---|
|
The request queue uses ->sysfs_dir_lock for protecting the addition/
deletion of kobject entries under sysfs while we register/unregister
blk-mq. However kobject addition/deletion is already protected with
kernfs/sysfs internal synchronization primitives. So use of q->sysfs_
dir_lock seems redundant.
Moreover, q->sysfs_dir_lock is also used at few other callsites along
with q->sysfs_lock for protecting the addition/deletion of kojects.
One such example is when we register with sysfs a set of independent
access ranges for a disk. Here as well we could get rid off q->sysfs_
dir_lock and only use q->sysfs_lock.
The only variable which q->sysfs_dir_lock appears to protect is q->
mq_sysfs_init_done which is set/unset while registering/unregistering
blk-mq with sysfs. But use of q->mq_sysfs_init_done could be easily
replaced using queue registered bit QUEUE_FLAG_REGISTERED.
So with this patch we remove q->sysfs_dir_lock from each callsite
and replace q->mq_sysfs_init_done using QUEUE_FLAG_REGISTERED.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250128143436.874357-2-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the
resume phase") overlooked the case in which the parent of a device with
DPM_FLAG_SMART_SUSPEND set did not use that flag and could be runtime-
suspended before a transition into a system-wide sleep state. In that
case, if the child is resumed during the subsequent transition from
that state into the working state, its runtime PM status will be set to
RPM_ACTIVE, but the runtime PM status of the parent will not be updated
accordingly, even though the parent will be resumed too, because of the
dev_pm_skip_suspend() check in device_resume_noirq().
Address this problem by tracking the need to set the runtime PM status
to RPM_ACTIVE during system-wide resume transitions for devices with
DPM_FLAG_SMART_SUSPEND set and all of the devices depended on by them.
Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase")
Closes: https://lore.kernel.org/linux-pm/Z30p2Etwf3F2AUvD@hovoldconsulting.com/
Reported-by: Johan Hovold <johan@kernel.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/12619233.O9o76ZdvQC@rjwysocki.net
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable using direct IO with localio
- Added localio related tracepoints
Bugfixes:
- Sunrpc fixes for working with a very large cl_tasks list
- Fix a possible buffer overflow in nfs_sysfs_link_rpc_client()
- Fixes for handling reconnections with localio
- Fix how the NFS_FSCACHE kconfig option interacts with NETFS_SUPPORT
- Fix COPY_NOTIFY xdr_buf size calculations
- pNFS/Flexfiles fix for retrying requesting a layout segment for
reads
- Sunrpc fix for retrying on EKEYEXPIRED error when the TGT is
expired
Cleanups:
- Various other nfs & nfsd localio cleanups
- Prepratory patches for async copy improvements that are under
development
- Make OFFLOAD_CANCEL, LAYOUTSTATS, and LAYOUTERR moveable to other
xprts
- Add netns inum and srcaddr to debugfs rpc_xprt info"
* tag 'nfs-for-6.14-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (28 commits)
SUNRPC: do not retry on EKEYEXPIRED when user TGT ticket expired
sunrpc: add netns inum and srcaddr to debugfs rpc_xprt info
pnfs/flexfiles: retry getting layout segment for reads
NFSv4.2: make LAYOUTSTATS and LAYOUTERROR MOVEABLE
NFSv4.2: mark OFFLOAD_CANCEL MOVEABLE
NFSv4.2: fix COPY_NOTIFY xdr buf size calculation
NFS: Rename struct nfs4_offloadcancel_data
NFS: Fix typo in OFFLOAD_CANCEL comment
NFS: CB_OFFLOAD can return NFS4ERR_DELAY
nfs: Make NFS_FSCACHE select NETFS_SUPPORT instead of depending on it
nfs: fix incorrect error handling in LOCALIO
nfs: probe for LOCALIO when v3 client reconnects to server
nfs: probe for LOCALIO when v4 client reconnects to server
nfs/localio: remove redundant code and simplify LOCALIO enablement
nfs_common: add nfs_localio trace events
nfs_common: track all open nfsd_files per LOCALIO nfs_client
nfs_common: rename nfslocalio nfs_uuid_lock to nfs_uuids_lock
nfsd: nfsd_file_acquire_local no longer returns GC'd nfsd_file
nfsd: rename nfsd_serv_ prefixed methods and variables with nfsd_net_
nfsd: update percpu_ref to manage references on nfsd_net
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the tty/serial driver set of changes for 6.14-rc1. Nothing
major in here, it was delayed a bit due to a regression found in
linux-next which has now been reverted and verified that it is fixed.
Other than the reverts, highlights include:
- 8250 work to get the nbcon mode working (partially reverted)
- altera_jtaguart minor fixes
- fsl_lpuart minor updates
- sh-sci driver minor updatesa
- other tiny driver updates and cleanups
All of these have been in linux-next for a while, and now with no
reports of problems (thanks to the reverts)"
* tag 'tty-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (44 commits)
Revert "serial: 8250: Switch to nbcon console"
Revert "serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()""
serial: sh-sci: Increment the runtime usage counter for the earlycon device
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use
serial: sh-sci: Move runtime PM enable to sci_probe_single()
serial: sh-sci: Drop __initdata macro for port_cfg
serial: kgdb_nmi: Remove unused knock code
tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN
tty: xilinx_uartps: split sysrq handling
serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()"
serial: 8250: Switch to nbcon console
serial: 8250: Provide flag for IER toggling for RS485
serial: 8250: Use high-level writing function for FIFO
serial: 8250: Use frame time to determine timeout
serial: 8250: Adjust the timeout for FIFO mode
tty: atmel_serial: Use of_property_present() for non-boolean properties
serial: sc16is7xx: Add polling mode if no IRQ pin is available
dt-bindings: serial: sc16is7xx: Add description for polling mode
tty: serial: atmel: make it selectable for ARCH_LAN969X
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Migrate to the generic rule for built-in DTB
- Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
- Derive timer max_delta from PRCFG1's timer_bits
- Correct the cacheinfo sharing information
- Add pgprot_nx() implementation
- Add debugfs entries to switch SFB/TSO state
- Change the maximum number of watchpoints
- Some bug fixes and other small changes
* tag 'loongarch-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Extend the maximum number of watchpoints
LoongArch: Change 8 to 14 for LOONGARCH_MAX_{BRP,WRP}
LoongArch: Add debugfs entries to switch SFB/TSO state
LoongArch: Fix warnings during S3 suspend
LoongArch: Adjust SETUP_SLEEP and SETUP_WAKEUP
LoongArch: Refactor bug_handler() implementation
LoongArch: Add pgprot_nx() implementation
LoongArch: Correct the __switch_to() prototype in comments
LoongArch: Correct the cacheinfo sharing information
LoongArch: Derive timer max_delta from PRCFG1's timer_bits
LoongArch: Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
LoongArch: Migrate to the generic rule for built-in DTB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this series, there are several major improvements such as folio
conversion by Matthew, speed-up of block truncation, and caching more
dentry pages.
In addition, we implemented a linear dentry search to address recent
unicode regression, and figured out some false alarms that we could
get rid of.
Enhancements:
- foilio conversion in various IO paths
- optimize f2fs_truncate_data_blocks_range()
- cache more dentry pages
- remove unnecessary blk_finish_plug
- procfs: show mtime in segment_bits
Bug fixes:
- introduce linear search for dentries
- don't call block truncation for aliased file
- fix using wrong 'submitted' value in f2fs_write_cache_pages
- fix to do sanity check correctly on i_inline_xattr_size
- avoid trying to get invalid block address
- fix inconsistent dirty state of atomic file"
* tag 'f2fs-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits)
f2fs: fix inconsistent dirty state of atomic file
f2fs: fix to avoid changing 'check only' behaior of recovery
f2fs: Clean up the loop outside of f2fs_invalidate_blocks()
f2fs: procfs: show mtime in segment_bits
f2fs: fix to avoid return invalid mtime from f2fs_get_section_mtime()
f2fs: Fix format specifier in sanity_check_inode()
f2fs: avoid trying to get invalid block address
f2fs: fix to do sanity check correctly on i_inline_xattr_size
f2fs: remove blk_finish_plug
f2fs: Optimize f2fs_truncate_data_blocks_range()
f2fs: fix using wrong 'submitted' value in f2fs_write_cache_pages
f2fs: add parameter @len to f2fs_invalidate_blocks()
f2fs: update_sit_entry_for_release() supports consecutive blocks.
f2fs: introduce update_sit_entry_for_release/alloc()
f2fs: don't call block truncation for aliased file
f2fs: Introduce linear search for dentries
f2fs: add parameter @len to f2fs_invalidate_internal_cache()
f2fs: expand f2fs_invalidate_compress_page() to f2fs_invalidate_compress_pages_range()
f2fs: ensure that node info flags are always initialized
f2fs: The GC triggered by ioctl also needs to mark the segno as victim
...
|
|
Pull nfsd updates from Chuck Lever:
"Jeff Layton contributed an implementation of NFSv4.2+ attribute
delegation, as described here:
https://www.ietf.org/archive/id/draft-ietf-nfsv4-delstid-08.html
This interoperates with similar functionality introduced into the
Linux NFS client in v6.11. An attribute delegation permits an NFS
client to manage a file's mtime, rather than flushing dirty data to
the NFS server so that the file's mtime reflects the last write, which
is considerably slower.
Neil Brown contributed dynamic NFSv4.1 session slot table resizing.
This facility enables NFSD to increase or decrease the number of slots
per NFS session depending on server memory availability. More session
slots means greater parallelism.
Chuck Lever fixed a long-standing latent bug where NFSv4 COMPOUND
encoding screws up when crossing a page boundary in the encoding
buffer. This is a zero-day bug, but hitting it is rare and depends on
the NFS client implementation. The Linux NFS client does not happen to
trigger this issue.
A variety of bug fixes and other incremental improvements fill out the
list of commits in this release. Great thanks to all contributors,
reviewers, testers, and bug reporters who participated during this
development cycle"
* tag 'nfsd-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (42 commits)
sunrpc: Remove gss_{de,en}crypt_xdr_buf deadcode
sunrpc: Remove gss_generic_token deadcode
sunrpc: Remove unused xprt_iter_get_xprt
Revert "SUNRPC: Reduce thread wake-up rate when receiving large RPC messages"
nfsd: implement OPEN_ARGS_SHARE_ACCESS_WANT_OPEN_XOR_DELEGATION
nfsd: handle delegated timestamps in SETATTR
nfsd: add support for delegated timestamps
nfsd: rework NFS4_SHARE_WANT_* flag handling
nfsd: add support for FATTR4_OPEN_ARGUMENTS
nfsd: prepare delegation code for handing out *_ATTRS_DELEG delegations
nfsd: rename NFS4_SHARE_WANT_* constants to OPEN4_SHARE_ACCESS_WANT_*
nfsd: switch to autogenerated definitions for open_delegation_type4
nfs_common: make include/linux/nfs4.h include generated nfs4_1.h
nfsd: fix handling of delegated change attr in CB_GETATTR
SUNRPC: Document validity guarantees of the pointer returned by reserve_space
NFSD: Insulate nfsd4_encode_fattr4() from page boundaries in the encode buffer
NFSD: Insulate nfsd4_encode_secinfo() from page boundaries in the encode buffer
NFSD: Refactor nfsd4_do_encode_secinfo() again
NFSD: Insulate nfsd4_encode_readlink() from page boundaries in the encode buffer
NFSD: Insulate nfsd4_encode_read_plus_data() from page boundaries in the encode buffer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- fix a spelling error in dm-raid
- change kzalloc to kcalloc
- remove useless test in alloc_multiple_bios
- disable REQ_NOWAIT for flushes
- dm-transaction-manager: use red-black trees instead of linear lists
- atomic writes support for dm-linear, dm-stripe and dm-mirror
- dm-crypt: code cleanups and two bugfixes
* tag 'for-6.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt: track tag_offset in convert_context
dm-crypt: don't initialize cc_sector again
dm-crypt: don't update io->sector after kcryptd_crypt_write_io_submit()
dm-crypt: use bi_sector in bio when initialize integrity seed
dm-crypt: fully initialize clone->bi_iter in crypt_alloc_buffer()
dm-crypt: set atomic as false when calling crypt_convert() in kworker
dm-mirror: Support atomic writes
dm-io: Warn on creating multiple atomic write bios for a region
dm-stripe: Enable atomic writes
dm-linear: Enable atomic writes
dm: Ensure cloned bio is same length for atomic write
dm-table: atomic writes support
dm-transaction-manager: use red-black trees instead of linear lists
dm: disable REQ_NOWAIT for flushes
dm: remove useless test in alloc_multiple_bios
dm: change kzalloc to kcalloc
dm raid: fix spelling errors in raid_ctr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for
existing drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: hcd: Bump local buffer size in rh_string()
Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"
usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS
usb: xhci: tegra: Fix OF boolean read warning
usb: host: xhci-plat: add support compatible ID PNP0D15
usb: typec: ucsi: Add a macro definition for UCSI v1.0
usb: dwc3: core: Defer the probe until USB power supply ready
usbip: Correct format specifier for seqnum from %d to %u
usbip: Fix seqnum sign extension issue in vhci_tx_urb
dt-bindings: usb: snps,dwc3: Split core description
usb: quirks: Add NO_LPM quirk for TOSHIBA TransMemory-Mx device
usb: dwc3: gadget: Reinitiate stream for all host NoStream behavior
USB: Use str_enable_disable-like helpers
USB: gadget: Use str_enable_disable-like helpers
USB: phy: Use str_enable_disable-like helpers
USB: typec: Use str_enable_disable-like helpers
USB: host: Use str_enable_disable-like helpers
USB: Replace own str_plural with common one
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
usb: phy: Remove API devm_usb_put_phy()
...
|
|
Quite a few places want to build a struct qstr by given string;
it would be convenient to have a primitive doing that, rather
than open-coding it via QSTR_INIT().
The closest approximation was in bcachefs, but that expands to
initializer list - {.len = strlen(string), .name = string}.
It would be more useful to have it as compound literal -
(struct qstr){.len = strlen(string), .name = string}.
Unlike initializer list it's a valid expression. What's more,
it's a valid lvalue - it's an equivalent of anonymous local
variable with such initializer, so the things like
path->dentry = d_alloc_pseudo(mnt->mnt_sb, &QSTR(name));
are valid. It can also be used as initializer, with identical
effect -
struct qstr x = (struct qstr){.name = s, .len = strlen(s)};
is equivalent to
struct qstr anon_variable = {.name = s, .len = strlen(s)};
struct qstr x = anon_variable;
// anon_variable is never used after that point
and any even remotely sane compiler will manage to collapse that
into
struct qstr x = {.name = s, .len = strlen(s)};
What compound literals can't be used for is initialization of
global variables, but those are covered by QSTR_INIT().
This commit lifts definition(s) of QSTR() into linux/dcache.h,
converts it to compound literal (all bcachefs users are fine
with that) and converts assorted open-coded instances to using
that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
9p wants to be able to build a path from given dentry to fs root and keep
it valid over a blocking operation.
->s_vfs_rename_mutex would be a natural candidate, but there are places
where we need that and where we have no way to tell if ->s_vfs_rename_mutex
is already held deeper in callchain. Moreover, it's only held for
cross-directory renames; name changes within the same directory happen
without it.
Solution:
* have d_move() done in ->rename() rather than in its caller
* maintain a 9p-private rwsem (per-filesystem)
* hold it exclusive over the relevant part of ->rename()
* hold it shared over the places where we want the path.
That almost works. FS_RENAME_DOES_D_MOVE is enough to put all d_move()
and d_exchange() calls under filesystem's control. However, there's
also __d_unalias(), which isn't covered by any of that.
If ->lookup() hits a directory inode with preexisting dentry elsewhere
(due to e.g. rename done on server behind our back), d_splice_alias()
called by ->lookup() will move/rename that alias.
Add a couple of optional methods, so that __d_unalias() would do
if alias->d_op->d_unalias_trylock != NULL
if (!alias->d_op->d_unalias_trylock(alias))
fail (resulting in -ESTALE from lookup)
__d_move(...)
if alias->d_op->d_unalias_unlock != NULL
alias->d_unalias_unlock(alias)
where it currently does __d_move(). 9p instances do down_write_trylock()
and up_write() of ->rename_mutex.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pass the stable name all the way down to ->rpc_ops->lookup() instances.
Note that passing &dentry->d_name is safe in e.g. nfs_lookup() - it *is*
stable there, as it is in ->create() et.al.
dget_parent() in nfs_instantiate() should be redundant - it'd better be
stable there; if it's not, we have more trouble, since ->d_name would
also be unsafe in such case.
nfs_submount() and nfs4_submount() may or may not require fixes - if
they ever get moved on server with fhandle preserved, we are in trouble
there...
UAF window is fairly narrow here and exfiltration requires the ability
to watch the traffic.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->d_revalidate() often needs to access dentry parent and name; that has
to be done carefully, since the locking environment varies from caller
to caller. We are not guaranteed that dentry in question will not be
moved right under us - not unless the filesystem is such that nothing
on it ever gets renamed.
It can be dealt with, but that results in boilerplate code that isn't
even needed - the callers normally have just found the dentry via dcache
lookup and want to verify that it's in the right place; they already
have the values of ->d_parent and ->d_name stable. There is a couple
of exceptions (overlayfs and, to less extent, ecryptfs), but for the
majority of calls that song and dance is not needed at all.
It's easier to make ecryptfs and overlayfs find and pass those values if
there's a ->d_revalidate() instance to be called, rather than doing that
in the instances.
This commit only changes the calling conventions; making use of supplied
values is left to followups.
NOTE: some instances need more than just the parent - things like CIFS
may need to build an entire path from filesystem root, so they need
more precautions than the usual boilerplate. This series doesn't
do anything to that need - these filesystems have to keep their locking
mechanisms (rename_lock loops, use of dentry_path_raw(), private rwsem
a-la v9fs).
One thing to keep in mind when using name is that name->name will normally
point into the pathname being resolved; the filename in question occupies
name->len bytes starting at name->name, and there is NUL somewhere after it,
but it the next byte might very well be '/' rather than '\0'. Do not
ignore name->len.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two fixes.
Conor Dooley found and fixed a problem in the pwm-microchip-core
driver that existed since the driver's birth in v6.5-rc1. It's about a
corner case that only happens if two pwm devices of the same chip are
set to the same long period.
The other problem is about the new pwm API that currently is only
supported by two hardware drivers. The fix prevents a NULL pointer
exception if one of the new functions is called for a pwm device with
a driver that only provides the old callbacks"
* tag 'pwm/for-6.14-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Ensure callbacks exist before calling them
pwm: microchip-core: fix incorrect comparison with max period
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power supply extensions, which allows adding properties
to a power supply device from a separate driver. This will be used
initially to extend the generic ACPI charger/battery driver with
vendor extensions for charge thresholds.
- convert all drivers from power_supply_for_each_device to new
power_supply_for_each_psy(), which avoids lots of casting being
done in the drivers.
- avoid LED trigger like values in uevent for
POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR
- introduce POWER_SUPPLY_PROP_CHARGE_TYPES, which is similar to the
POWER_SUPPLY_PROP_CHARGE_TYPE property, but also lists the
available options on the specific platform
Power-supply drivers
- dell-laptop: use new power_supply_charge_types_show/_parse helpers
- stc3117: new driver for equally named fuel gauge chip
- bq24190: add support for new POWER_SUPPLY_PROP_CHARGE_TYPES
- bq24190: add BQ24297 support
- bq27xxx: add voltage min design for bq27000/bq27200
- cros_charge-control: convert to new power supply extension API
- multiple drivers: constify 'struct bin_attribute'
- ds2782: convert to device managed resources
- max1720x: add charge full property
- max1720x: support extra thermistor temperatures
- max17042: add max77705 support
- ip5xxx-power: add support for IP5306
- ltc4162-l-charger: add ltc4162-f/s and ltc4015 support
- gpio-charger: support for default charge current limit
- misc small cleanups and fixes
Reset drivers:
- at91-poweroff: add sam9x7 support"
* tag 'for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (77 commits)
power: supply: max1720x: add support for reading internal and thermistor temperatures
power: supply: ltc4162l: Use GENMASK macro in bitmask operation
power: supply: max17042: add max77705 fuel gauge support
dt-bindings: power: supply: max17042: add max77705 support
power: supply: add undervoltage health status property
power: supply: max17042: add platform driver variant
power: supply: max17042: make interrupt shared
power: reset: keystone: Use syscon_regmap_lookup_by_phandle_args
power: supply: Use str_enable_disable-like helpers
platform/x86: dell-laptop: Use power_supply_charge_types_show/_parse() helpers
power: supply: bq2415x_charger: Immediately reschedule delayed work on notifier events
power: supply: Add STC3117 fuel gauge unit driver
dt-bindings: power: supply: Add STC3117 Fuel Gauge
power: supply: ug3105_battery: Let the core handle POWER_SUPPLY_PROP_TECHNOLOGY
power: supply: gpio-charger: add support for default charge current limit
dt-bindings: power: supply: gpio-charger: add support for default charge current limit
power: supply: Use power_supply_external_power_changed() in __power_supply_changed_work()
power: supply: core: fix build of extension sysfs group if CONFIG_SYSFS=n
power: supply: bq2415x_charger: report charging state changes to userspace
bq27xxx: add voltage min design for bq27000 and bq27200
...
|
|
Pull virtio updates from Michael Tsirkin:
"A small number of improvements all over the place:
- vdpa/octeon support for multiple interrupts
- virtio-pci support for error recovery
- vp_vdpa support for notification with data
- vhost/net fix to set num_buffers for spec compliance
- virtio-mem now works with kdump on s390
And small cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (23 commits)
virtio_blk: Add support for transport error recovery
virtio_pci: Add support for PCIe Function Level Reset
vhost/net: Set num_buffers for virtio 1.0
vdpa/octeon_ep: read vendor-specific PCI capability
virtio-pci: define type and header for PCI vendor data
vdpa/octeon_ep: handle device config change events
vdpa/octeon_ep: enable support for multiple interrupts per device
vdpa: solidrun: Replace deprecated PCI functions
s390/kdump: virtio-mem kdump support (CONFIG_PROC_VMCORE_DEVICE_RAM)
virtio-mem: support CONFIG_PROC_VMCORE_DEVICE_RAM
virtio-mem: remember usable region size
virtio-mem: mark device ready before registering callbacks in kdump mode
fs/proc/vmcore: introduce PROC_VMCORE_DEVICE_RAM to detect device RAM ranges in 2nd kernel
fs/proc/vmcore: factor out freeing a list of vmcore ranges
fs/proc/vmcore: factor out allocating a vmcore range and adding it to a list
fs/proc/vmcore: move vmcore definitions out of kcore.h
fs/proc/vmcore: prefix all pr_* with "vmcore:"
fs/proc/vmcore: disallow vmcore modifications while the vmcore is open
fs/proc/vmcore: replace vmcoredd_mutex by vmcore_mutex
fs/proc/vmcore: convert vmcore_cb_lock into vmcore_mutex
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-01-27
1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs.
From Jianbo Liu.
2) Fix an out-of-bounds read on xfrm state lookup.
From Florian Westphal.
3) Fix secpath handling on packet offload mode.
From Alexandre Cassen.
4) Fix the usage of skb->sk in the xfrm layer.
5) Don't disable preemption while looking up cache state
to fix PREEMPT_RT.
From Sebastian Sewior.
* tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Don't disable preemption while looking up cache state.
xfrm: Fix the usage of skb->sk
xfrm: delete intermediate secpath entry in packet offload mode
xfrm: state: fix out-of-bounds read during lookup
xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO
====================
Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Page ppol tried to cache the NAPI ID in page pool info to avoid
having a dependency on the life cycle of the NAPI instance.
Since commit under Fixes the NAPI ID is not populated until
napi_enable() and there's a good chance that page pool is
created before NAPI gets enabled.
Protect the NAPI pointer with the existing page pool mutex,
the reading path already holds it. napi_id itself we need
to READ_ONCE(), it's protected by netdev_lock() which are
not holding in page pool.
Before this patch napi IDs were missing for mlx5:
# ./cli.py --spec netlink/specs/netdev.yaml --dump page-pool-get
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912},
{'id': 143, 'ifindex': 2, 'inflight': 5568, 'inflight-mem': 22806528},
{'id': 142, 'ifindex': 2, 'inflight': 5120, 'inflight-mem': 20971520},
{'id': 141, 'ifindex': 2, 'inflight': 4992, 'inflight-mem': 20447232},
...
After:
[{'id': 144, 'ifindex': 2, 'inflight': 3072, 'inflight-mem': 12582912,
'napi-id': 565},
{'id': 143, 'ifindex': 2, 'inflight': 4224, 'inflight-mem': 17301504,
'napi-id': 525},
{'id': 142, 'ifindex': 2, 'inflight': 4288, 'inflight-mem': 17563648,
'napi-id': 524},
...
Fixes: 86e25f40aa1e ("net: napi: Add napi_config")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250123231620.1086401-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ndo_do_ioctl is no longer used by the appletalk subsystem after commit
45bd1c5ba758 ("net: appletalk: Drop aarp_send_probe_phase1()").
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/tencent_4AC6ED413FEA8116B4253D3ED6947FDBCF08@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ARM updates from Russell King:
- fix typos in vfpmodule.c
- drop obsolete VFP accessor fallback for old assemblers
- add cache line identifier register accessor functions
- add cacheinfo support
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9440/1: cacheinfo fix format field mask
ARM: 9433/2: implement cacheinfo support
ARM: 9432/2: add CLIDR accessor functions
ARM: 9438/1: assembler: Drop obsolete VFP accessor fallback
ARM: 9437/1: vfp: Fix typographical errors in vfpmodule.c
|
|
The existence of the ceph_mds_request_head_old structure in the MDS
client code is no longer required due to improvements in handling
different MDS request header versions. This patch removes the now
redundant ceph_mds_request_head_old structure and replaces its usage
with the flexible and extensible ceph_mds_request_head structure.
Changes include:
- Modification of find_legacy_request_head to directly cast the
pointer to ceph_mds_request_head_legacy without going through the
old structure.
- Update sizeof calculations in create_request_message to use
offsetofend for consistency and future-proofing, rather than
referencing the old structure.
- Use of the structured ceph_mds_request_head directly instead of the
old one.
Additionally, this consolidation normalizes the handling of
request_head_version v1 to align with versions v2 and v3, leading to
a more consistent and maintainable codebase.
These changes simplify the codebase and reduce potential confusion
stemming from the existence of an obsolete structure.
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Implement support for Function Level Reset (FLR) in virtio_pci devices.
This change adds reset_prepare and reset_done callbacks, allowing
drivers to properly handle FLR operations.
Without this patch, performing and recovering from an FLR is not possible
for virtio_pci devices. This implementation ensures proper FLR handling
and recovery for both physical and virtual functions.
The device reset can be triggered in case of error or manually via
sysfs:
echo 1 > /sys/bus/pci/devices/$PCI_ADDR/reset
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <1732690652-3065-2-git-send-email-israelr@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Added macro definition for VIRTIO_PCI_CAP_VENDOR_CFG to identify the PCI
vendor data type in the virtio_pci_cap structure. Defined a new struct
virtio_pci_vndr_data for the vendor data capability header as per the
specification.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Message-Id: <20250103153226.1933479-3-sthotton@marvell.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
in 2nd kernel
s390 allocates+prepares the elfcore hdr in the dump (2nd) kernel, not in
the crashed kernel.
RAM provided by memory devices such as virtio-mem can only be detected
using the device driver; when vmcore_init() is called, these device
drivers are usually not loaded yet, or the devices did not get probed
yet. Consequently, on s390 these RAM ranges will not be included in
the crash dump, which makes the dump partially corrupt and is
unfortunate.
Instead of deferring the vmcore_init() call, to an (unclear?) later point,
let's reuse the vmcore_cb infrastructure to obtain device RAM ranges as
the device drivers probe the device and get access to this information.
Then, we'll add these ranges to the vmcore, adding more PT_LOAD
entries and updating the offsets+vmcore size.
Use a separate Kconfig option to be set by an architecture to include this
code only if the arch really needs it. Further, we'll make the config
depend on the relevant drivers (i.e., virtio_mem) once they implement
support (next). The alternative of having a PROVIDE_PROC_VMCORE_DEVICE_RAM
config option was dropped for now for simplicity.
The current target use case is s390, which only creates an elf64
elfcore, so focusing on elf64 is sufficient.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-9-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's factor it out into include/linux/crash_dump.h, from where we can
use it also outside of vmcore.c later.
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-8-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's factor it out into include/linux/crash_dump.h, from where we can
use it also outside of vmcore.c later.
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-7-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
These vmcore defines are not related to /proc/kcore, move them out.
We'll move "struct vmcoredd_node" to vmcore.c, because it is only used
internally. While "struct vmcore" is only used internally for now,
we're planning on using it from inline functions in crash_dump.h next,
so move it to crash_dump.h.
While at it, rename "struct vmcore" to "struct vmcore_range", which is a
more suitable name and will make the usage of it outside of vmcore.c
clearer.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-6-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr).
The major core change is the renaming of the slave_ methods plus a bit
of constification. The rest are minor updates and fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (103 commits)
scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init()
scsi: fnic: Test for memory allocation failure and return error code
scsi: fnic: Return appropriate error code from failure of scsi drv init
scsi: fnic: Return appropriate error code for mem alloc failure
scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macro
scsi: fnic: Fix use of uninitialized value in debug message
scsi: fnic: Delete incorrect debugfs error handling
scsi: fnic: Remove unnecessary else to fix warning in FDLS FIP
scsi: fnic: Remove extern definition from .c files
scsi: fnic: Remove unnecessary else and unnecessary break in FDLS
scsi: mpi3mr: Fix possible crash when setting up bsg fails
scsi: ufs: bsg: Set bsg_queue to NULL after removal
scsi: ufs: bsg: Delete bsg_dev when setting up bsg fails
scsi: st: Don't set pos_unknown just after device recognition
scsi: aic7xxx: Fix build 'aicasm' warning
scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service
scsi: scsi_debug: Constify sdebug_driver_template
scsi: documentation: Corrections for struct updates
scsi: driver-api: documentation: Change what is added to docbook
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Petr Pavlu:
- Sign modules with sha512 instead of sha1 by default
- Don't fail module loading when failing to set the
ro_after_init section read-only
- Constify 'struct module_attribute'
- Cleanups and preparation for const struct bin_attribute
- Put known GPL offenders in an array
- Extend the preempt disabled section in
dereference_symbol_descriptor()
* tag 'modules-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: sign with sha512 instead of sha1 by default
module: Don't fail module loading when setting ro_after_init section RO failed
module: Split module_enable_rodata_ro()
module: sysfs: Use const 'struct bin_attribute'
module: sysfs: Add notes attributes through attribute_group
module: sysfs: Simplify section attribute allocation
module: sysfs: Drop 'struct module_sect_attr'
module: sysfs: Drop member 'module_sect_attr::address'
module: sysfs: Drop member 'module_sect_attrs::nsections'
module: Constify 'struct module_attribute'
module: Handle 'struct module_version_attribute' as const
params: Prepare for 'const struct module_attribute *'
module: Put known GPL offenders in an array
module: Extend the preempt disabled section in dereference_symbol_descriptor().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rv and tools/rtla updates from Steven Rostedt:
- Add a test suite to test the tool
Add a small test suite that can be used to test rtla's basic features
to at least have something to test when applying changes.
- Automate manual steps in monitor creation
While creating a new monitor in RV, besides generating code from
dot2k, there are a few manual steps which can be tedious and error
prone, like adding the tracepoints, makefile lines and kconfig, or
selecting events that start the monitor in the initial state.
Updates were made to try and automate as much as possible among those
steps to make creating a new RV monitor much quicker. It is still
requires to select proper tracepoints, this step is harder to
automate in a general way and, in several cases, would still need
user intervention.
- Have rtla timerlat hist and top set OSNOISE_WORKLOAD flag
Have both rtla-timerlat-hist and rtla-timerlat-top set
OSNOISE_WORKLOAD to the proper value ("on" when running with -k,
"off" when running with -u) every time the option is available
instead of setting it only when running with -u.
This prevents rtla timerlat -k from giving no results when
NO_OSNOISE_WORKLOAD is set, either manually or by an abnormally
exited earlier run of rtla timerlat -u.
- Stop rtla timerlat on signal properly when overloaded
There is an issue where if rtla is run on machines with a high number
of CPUs (100+), timerlat can generate more samples than rtla is able
to process via tracefs_iterate_raw_events. This is especially common
when the interval is set to 100us (rteval and cyclictest default) as
opposed to the rtla default of 1000us, but also happens with the rtla
default.
Currently, this leads to rtla hanging and having to be terminated
with SIGTERM. SIGINT setting stop_tracing is not enough, since more
and more events are coming and tracefs_iterate_raw_events never
exits.
To fix this: Stop the timerlat tracer on SIGINT/SIGALRM to ensure no
more events are generated when rtla is supposed to exit.
Also on receiving SIGINT/SIGALRM twice, abort iteration immediately
with tracefs_iterate_stop, making rtla exit right away instead of
waiting for all events to be processed.
- Account for missed events
Due to tracefs buffer overflow, it can happen that rtla misses
events, making the tracing results inaccurate.
Count both the number of missed events and the total number of
processed events, and display missed events as well as their
percentage. The numbers are displayed for both osnoise and timerlat,
even though for the earlier, missed events are generally not
expected.
For hist, the number is displayed at the end of the run; for top, it
is displayed on each printing of the top table.
- Changes to make osnoise more robust
There was a dependency in the code that the first field of the
osnoise_tool structure was the trace field. If that that ever
changed, then the code work break. Change the code to encapsulate
this dependency where the code that uses the structure does not have
this dependency.
* tag 'trace-tools-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits)
rtla: Report missed event count
rtla: Add function to report missed events
rtla: Count all processed events
rtla: Count missed trace events
tools/rtla: Add osnoise_trace_is_off()
rtla/timerlat_top: Set OSNOISE_WORKLOAD for kernel threads
rtla/timerlat_hist: Set OSNOISE_WORKLOAD for kernel threads
rtla/osnoise: Distinguish missing workload option
rtla/timerlat_top: Abort event processing on second signal
rtla/timerlat_hist: Abort event processing on second signal
rtla/timerlat_top: Stop timerlat tracer on signal
rtla/timerlat_hist: Stop timerlat tracer on signal
rtla: Add trace_instance_stop
tools/rtla: Add basic test suite
verification/dot2k: Implement event type detection
verification/dot2k: Auto patch current kernel source
verification/dot2k: Simplify manual steps in monitor creation
rv: Simplify manual steps in monitor creation
verification/dot2k: Add support for name and description options
verification/dot2k: More robust template variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier and osnoise fixes from Steven Rostedt:
- Reset idle tasks on reset for runtime verifier
When the runtime verifier is reset, it resets the task's data that is
being monitored. But it only iterates for_each_process() which does
not include the idle tasks. As the idle tasks can be monitored, they
need to be reset as well.
- Fix the enabling and disabling of tracepoints in osnoise
If timerlat is enabled and the WORKLOAD flag is not set, then the
osnoise tracer will enable the migrate task tracepoint to monitor it
for its own workload. The test to enable the tracepoint is done
against user space modifiable parameters. On disabling of the tracer,
those same parameters are used to determine if the tracepoint should
be disabled. The problem is if user space were to modify the
parameters after it enables the tracer then it may not disable the
tracepoint.
Instead, a static variable is used to keep track if the tracepoint
was enabled or not. Then when the tracer shuts down, it will use this
variable to decide to disable the tracepoint or not, instead of
looking at the user space parameters.
* tag 'trace-rv-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/osnoise: Fix resetting of tracepoints
rv: Reset per-task monitors also for idle tasks
|
|
Pull bitmap updates from Yury Norov:
"This includes const_true() series from Vincent Mailhol, another
__always_inline rework from Nathan Chancellor for RISCV, and a couple
of random fixes from Dr. David Alan Gilbert and I Hsin Cheng"
* tag 'bitmap-for-6.14' of https://github.com:/norov/linux:
cpumask: Rephrase comments for cpumask_any*() APIs
cpu: Remove unused init_cpu_online
riscv: Always inline bitops
linux/bits.h: simplify GENMASK_INPUT_CHECK()
compiler.h: add const_true()
|
|
The enable_gpe_wakeup() function calls acpi_enable_all_wakeup_gpes(),
and the later one may call the preempt_schedule_common() function,
resulting in a thread switch and causing the CPU to be in an interrupt
enabled state after the enable_gpe_wakeup() function returns, leading
to the warnings as follow.
[ C0] WARNING: ... at kernel/time/timekeeping.c:845 ktime_get+0xbc/0xc8
[ C0] ...
[ C0] Call Trace:
[ C0] [<90000000002243b4>] show_stack+0x64/0x188
[ C0] [<900000000164673c>] dump_stack_lvl+0x60/0x88
[ C0] [<90000000002687e4>] __warn+0x8c/0x148
[ C0] [<90000000015e9978>] report_bug+0x1c0/0x2b0
[ C0] [<90000000016478e4>] do_bp+0x204/0x3b8
[ C0] [<90000000025b1924>] exception_handlers+0x1924/0x10000
[ C0] [<9000000000343bbc>] ktime_get+0xbc/0xc8
[ C0] [<9000000000354c08>] tick_sched_timer+0x30/0xb0
[ C0] [<90000000003408e0>] __hrtimer_run_queues+0x160/0x378
[ C0] [<9000000000341f14>] hrtimer_interrupt+0x144/0x388
[ C0] [<9000000000228348>] constant_timer_interrupt+0x38/0x48
[ C0] [<90000000002feba4>] __handle_irq_event_percpu+0x64/0x1e8
[ C0] [<90000000002fed48>] handle_irq_event_percpu+0x20/0x80
[ C0] [<9000000000306b9c>] handle_percpu_irq+0x5c/0x98
[ C0] [<90000000002fd4a0>] generic_handle_domain_irq+0x30/0x48
[ C0] [<9000000000d0c7b0>] handle_cpu_irq+0x70/0xa8
[ C0] [<9000000001646b30>] handle_loongarch_irq+0x30/0x48
[ C0] [<9000000001646bc8>] do_vint+0x80/0xe0
[ C0] [<90000000002aea1c>] finish_task_switch.isra.0+0x8c/0x2a8
[ C0] [<900000000164e34c>] __schedule+0x314/0xa48
[ C0] [<900000000164ead8>] schedule+0x58/0xf0
[ C0] [<9000000000294a2c>] worker_thread+0x224/0x498
[ C0] [<900000000029d2f0>] kthread+0xf8/0x108
[ C0] [<9000000000221f28>] ret_from_kernel_thread+0xc/0xa4
[ C0]
[ C0] ---[ end trace 0000000000000000 ]---
The root cause is acpi_enable_all_wakeup_gpes() uses a mutex to protect
acpi_hw_enable_all_wakeup_gpes(), and acpi_ut_acquire_mutex() may cause
a thread switch. Since there is no longer concurrent execution during
loongarch_acpi_suspend(), we can call acpi_hw_enable_all_wakeup_gpes()
directly in enable_gpe_wakeup().
The solution is similar to commit 22db06337f590d01 ("ACPI: sleep: Avoid
breaking S3 wakeup due to might_sleep()").
Fixes: 366bb35a8e48 ("LoongArch: Add suspend (ACPI S3) support")
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
These structs are never modified, move them to read-only memory.
This makes the API clearer and also prepares for the constification of
'struct attribute' itself.
While at it, also constify 'modinfo_attrs_count'.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20241216-sysfs-const-attr-module-v1-3-3790b53e0abf@weissschuh.net
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
The structure is always read-only due to its placement in the read-only
section __modver. Reflect this at its usage sites.
Also prepare for the const handling of 'struct module_attribute' itself.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20241216-sysfs-const-attr-module-v1-2-3790b53e0abf@weissschuh.net
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
dereference_symbol_descriptor() needs to obtain the module pointer
belonging to pointer in order to resolve that pointer.
The returned mod pointer is obtained under RCU-sched/ preempt_disable()
guarantees and needs to be used within this section to ensure that the
module is not removed in the meantime.
Extend the preempt_disable() section to also cover
dereference_module_function_descriptor().
Fixes: 04b8eb7a4ccd9 ("symbol lookup: introduce dereference_symbol_descriptor()")
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Helge Deller <deller@gmx.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250108090457.512198-2-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
Add missing documentation for raw_seqcount_try_begin() start parameter.
Link: https://lkml.kernel.org/r/20250116182730.801497-1-surenb@google.com
Fixes: dba4761a3e40 ("seqlock: add raw_seqcount_try_begin")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20250116170522.23e884d5@canb.auug.org.au/
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Callers can pass this in for uncached folio creation, in which case if a
folio is newly created it gets marked as uncached. If a folio exists for
this index and lookup succeeds, then it will not get marked as uncached.
If an !uncached lookup finds a cached folio, clear the flag. For that
case, there are competeting uncached and cached users of the folio, and it
should not get pruned.
Link: https://lkml.kernel.org/r/20241220154831.1086649-13-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Chris Mason <clm@meta.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a buffered write submitted with IOCB_DONTCACHE has been successfully
submitted, call filemap_fdatawrite_range_kick() to kick off the IO. File
systems call generic_write_sync() for any successful buffered write
submission, hence add the logic here rather than needing to modify the
file system.
Link: https://lkml.kernel.org/r/20241220154831.1086649-12-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Chris Mason <clm@meta.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Works like filemap_fdatawrite_range(), except it's a non-integrity data
writeback and hence only starts writeback on the specified range. Will
help facilitate generically starting uncached writeback from
generic_write_sync(), as header dependencies preclude doing this inline
from fs.h.
Link: https://lkml.kernel.org/r/20241220154831.1086649-11-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Chris Mason <clm@meta.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a file system supports uncached buffered IO, it may set FOP_DONTCACHE
and enable support for RWF_DONTCACHE. If RWF_DONTCACHE is attempted
without the file system supporting it, it'll get errored with -EOPNOTSUPP.
Link: https://lkml.kernel.org/r/20241220154831.1086649-8-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Chris Mason <clm@meta.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If ractl->dropbehind is set to true, then folios created are marked as
dropbehind as well.
Link: https://lkml.kernel.org/r/20241220154831.1086649-6-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Chris Mason <clm@meta.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a folio flag that file IO can use to indicate that the cached IO being
done should be dropped from the page cache upon completion.
Link: https://lkml.kernel.org/r/20241220154831.1086649-5-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Chris Mason <clm@meta.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that folio_putback_hugetlb() is only called on folios that were
previously isolated through folio_isolate_hugetlb(), let's rename it to
match folio_putback_lru().
Add some kernel doc to clarify how this function is supposed to be used.
Link: https://lkml.kernel.org/r/20250113131611.2554758-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's make the function name match "folio_isolate_lru()", and add some
kernel doc.
Link: https://lkml.kernel.org/r/20250113131611.2554758-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
