| Age | Commit message (Collapse) | Author |
|---|
|
- Drop shpchp module init/exit logging (Ilpo Järvinen)
- Replace shpchp dbg() with ctrl_dbg() and remove unused dbg(), err(),
info(), warn() wrappers (Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused .get_power(), .set_power() function pointers (Guilherme
Giacomo Simoes)
- Drop superfluous pci_hotplug_slot_list (Lukas Wunner)
- Drop superfluous try_module_get() calls (Lukas Wunner)
- Drop superfluous NULL pointer checks (Lukas Wunner)
- Pass struct hotplug_slot pointers directly to avoid backpointer
dereferencing in has_*_file() (Lukas Wunner)
- Inline pci_hp_{create,remove}_module_link() to reduce exported symbols
(Lukas Wunner)
- Disable hotplug interrupts in portdrv only when pciehp is not enabled to
prevent issuing two hotplug commands too close together (Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed to
address a common deadlock when resuming after a device was removed during
system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo
Järvinen)
* pci/hotplug:
PCI: pciehp: Don't enable HPIE when resuming in poll mode
PCI: pciehp: Avoid unnecessary device replacement check
PCI/portdrv: Only disable pciehp interrupts early when needed
PCI: hotplug: Inline pci_hp_{create,remove}_module_link()
PCI: hotplug: Avoid backpointer dereferencing in has_*_file()
PCI: hotplug: Drop superfluous NULL pointer checks in has_*_file()
PCI: hotplug: Drop superfluous try_module_get() calls
PCI: hotplug: Drop superfluous pci_hotplug_slot_list
PCI: cpcihp: Remove unused .get_power() and .set_power()
PCI: shpchp: Remove 'shpchp_debug' module parameter
PCI: shpchp: Remove unused logging wrappers
PCI: shpchp: Change dbg() -> ctrl_dbg()
PCI: shpchp: Remove logging from module init/exit functions
|
|
- Enable Configuration RRS SV early instead of during child bus scanning
(Bjorn Helgaas)
- Cache offset of Resizable BAR capability to avoid redundant searches for
it (Bjorn Helgaas)
- Fix reference leaks in pci_register_host_bridge() and
pci_alloc_child_bus() (Ma Ke)
- Drop put_device() in pci_register_host_bridge() left over from converting
device_register() to device_add() (Dan Carpenter)
* pci/enumeration:
PCI: Remove stray put_device() in pci_register_host_bridge()
PCI: Fix reference leak in pci_alloc_child_bus()
PCI: Fix reference leak in pci_register_host_bridge()
PCI: Cache offset of Resizable BAR capability
PCI: Enable Configuration RRS SV early
|
|
- Rename DOE 'protocol' to 'feature' to follow spec terminology (Alistair
Francis)
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
* pci/doe:
PCI/DOE: Allow enabling DOE without CXL
PCI/DOE: Expose DOE features via sysfs
PCI/DOE: Rename Discovery Response Data Object Contents to type
PCI/DOE: Rename DOE protocol to feature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"This is mainly set of cleanups of asm-generic/io.h, resolving problems
with inconsistent semantics of ioread64/iowrite64 that were causing
runtime and build issues.
The "GENERIC_IOMAP" version that switches between inb()/outb() and
readb()/writeb() style accessors is now only used on architectures
that have PC-style ISA devices that are not memory mapped (x86, uml,
m68k-q40 and powerpc-powernv), while alpha and parisc use a more
complicated variant and everything else just maps the ioread
interfaces to plan MMIO (readb/writeb etc).
In addition there are two small changes from Raag Jadav to simplify
the asm-generic/io.h indirect inclusions and from Jann Horn to fix a
corner case with read_word_at_a_time"
* tag 'asm-generic-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
rwonce: fix crash by removing READ_ONCE() for unaligned read
rwonce: handle KCSAN like KASAN in read_word_at_a_time()
m68k: coldfire: select PCI_IOMAP for PCI
mips: export pci_iounmap()
mips: fix PCI_IOBASE definition
m68k/nommu: stop using GENERIC_IOMAP
mips: drop GENERIC_IOMAP wrapper
powerpc: asm/io.h: remove split ioread64/iowrite64 helpers
parisc: stop using asm-generic/iomap.h
sh: remove duplicate ioread/iowrite helpers
alpha: stop using asm-generic/iomap.h
io.h: drop unused headers
drm/draw: include missing headers
asm-generic/io.h: rework split ioread64/iowrite64 helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
|
|
Add TPM start method for ARM FF-A defined in the TCG ACPI specification
v1.4.
See: https://trustedcomputinggroup.org/wp-content/uploads/TCG-ACPI-Specification-Version-1.4-Revision-15_pub.pdf
[jarkko:
1. Fine-tuned the commit message.
2. Added link to the TCG ACPI specification.]
Link: https://github.com/acpica/acpica/pull/1000
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
[ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0
[ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0
[ 115.001880][ T5313] Call Trace:
[ 115.002222][ T5313] <TASK>
[ 115.007813][ T5313] io_send+0x4fe/0x10f0
[ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740
[ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0
[ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600
[ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0
As the comment states, io_req_post_cqe() should only be used by
multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are
not. Add a flag signifying whether a request wants to post multiple
CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but
that's left out for simplicity.
Cc: stable@vger.kernel.org
Fixes: a05d1f625c7aa ("io_uring/net: support bundles for send")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8b611dbb54d1cd47a88681f5d38c84d0c02bc563.1743067183.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
|
Pull zstd updates from Nick Terrell:
"Update zstd to the latest upstream release v1.5.7.
The two major motivations for updating Zstandard are to keep the code
up to date, and to expose API's needed by Intel for the QAT
compression accelerator.
Imported cleanly from the upstream tag v1.5.7-kernel, which is signed
by upstream's signing key EF8FE99528B52FFD"
Link: https://github.com/facebook/zstd/releases/tag/v1.5.7
Link: https://github.com/facebook/zstd/releases/tag/v1.5.7-kernel
Link: https://keyserver.ubuntu.com/pks/lookup?search=EF8FE99528B52FFD&fingerprint=on&op=index
* tag 'zstd-linus-v6.15-rc1' of https://github.com/terrelln/linux:
zstd: Import upstream v1.5.7
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
|
|
Currently the shared memory communication address was mapped by the
mailbox client drivers leading to all sorts of inconsistencies.
It also has resulted in the inconsistent attributes used while mapping
the shared memory regions.
In order to remove/eliminate any issues, let us ensures the shared
memory address is always mapped and unmapped when the PCC channels are
requested and release.
We need to map them as the ACPI PCCT associates these shared memory
with each channel subspace and may need use the status or the flags in
the headers of those shared memory communication address regions to
manage the transport/channel.
Note, until all the drivers using PCC start using this mapped shmem,
there might be double mapping of the shared memory address. This
shouldn't have any impact on existing mbox client drivers.
Since there are no users of pcc_chan_ioremap() and also it is mapped
by default, we can stop exporting it and merge the functionality into
pcc_mbox_request_channel().
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The Sparse static checker flags a type mismatch warning related to
endianness conversion:
| warning: incorrect type in argument 1 (different base types)
| expected restricted __le32 const [usertype] *p
| got unsigned int *
This is because an explicit endianness conversion (le32_to_cpu()) was
applied unnecessarily to a pcc_hdr.flags field that is already in
little-endian format.
The PCC driver is only enabled on little-endian kernels due to its
dependency on ACPI and EFI, making the explicit conversion unnecessary.
The redundant conversion occurs in pcc_chan_check_and_ack() for the
pcc_hdr.flags field. Drop this unnecessary endianness conversion of
pcc_hdr.flags.
Also drop the redundant PCC_ACK_FLAG_MASK definition and use the
more appropriate and already defined PCC_CMD_COMPLETION_NOTIFY.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Sorting headers alphabetically helps locating duplicates,
and makes it easier to figure out where to insert new headers.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Every client driver has the struct cmdq_client information, so
it's not necessary to store it in struct cmdq_pkt. cl is used to
store struct cmdq_client information and now no client driver use
it, so remove it.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
|
|
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
|
|
Samuel Holland <samuel.holland@sifive.com> says:
Currently, RISC-V NOMMU kernels are linked at CONFIG_PAGE_OFFSET, and
since they are not relocatable, must be loaded at this address as well.
CONFIG_PAGE_OFFSET is not a user-visible Kconfig option, so its value is
not obvious, and users must patch the kernel source if they want to load
it at a different address.
Make NOMMU kernels more portable by making them relocatable by default.
This allows a single kernel binary to work when loaded at any address.
* b4-shazam-merge:
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
Link: https://lore.kernel.org/r/20241026171441.3047904-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
These definitions are useful for relocating the kernel image as well,
regardless of the type of relocations used for modules.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241026171441.3047904-5-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When arm64 is built with LTO, it upgrades READ_ONCE() to ldar / ldapr
(load-acquire) to avoid issues that can be caused by the compiler
optimizing away implicit address dependencies.
Unlike plain loads, these load-acquire instructions actually require an
aligned address.
For now, fix it by removing the READ_ONCE() that the buggy commit
introduced.
Fixes: ece69af2ede1 ("rwonce: handle KCSAN like KASAN in read_word_at_a_time()")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/r/20250326203926.GA10484@ax162
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* clk-allwinner:
clk: sunxi-ng: add support for the A523/T527 PRCM CCU
clk: sunxi-ng: a523: add reset lines
clk: sunxi-ng: a523: add bus clock gates
clk: sunxi-ng: a523: remaining mod clocks
clk: sunxi-ng: a523: add USB mod clocks
clk: sunxi-ng: a523: add interface mod clocks
clk: sunxi-ng: a523: add system mod clocks
clk: sunxi-ng: a523: add video mod clocks
clk: sunxi-ng: a523: Add support for bus clocks
clk: sunxi-ng: Add support for the A523/T527 CCU PLLs
dt-bindings: clk: sunxi-ng: document two Allwinner A523 CCUs
clk: sunxi-ng: Add support for update bit
clk: sunxi-ng: mp: provide wrappers for setting feature flags
clk: sunxi-ng: mp: introduce dual-divider clock
clk: sunxi-ng: h616: Reparent GPU clock during frequency changes
clk: sunxi-ng: h616: Add clock/reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LCD TCON clk and reset
* clk-amlogic:
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
* clk-qcom: (41 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: qcom: gcc-sm8650: Do not turn off USB GDSCs during gdsc_disable()
clk: qcom: videocc: Constify 'struct qcom_cc_desc'
clk: qcom: gpucc: Constify 'struct qcom_cc_desc'
clk: qcom: dispcc: Constify 'struct qcom_cc_desc'
clk: qcom: camcc: Constify 'struct qcom_cc_desc'
dt-bindings: clock: qcom: sm8450-camcc: Remove qcom,x1e80100-camcc leftover
clk: qcom: Add support for Video Clock Controller on QCS8300
clk: qcom: Add support for GPU Clock Controller on QCS8300
...
|
|
* clk-rockchip:
dt-bindings: reset: fix double id on rk3562-cru reset ids
clk: rockchip: Add clock controller for the RK3562
dt-bindings: clock: Add RK3562 cru
clk: rockchip: rk3528: Add reset lookup table
clk: rockchip: Add clock controller driver for RK3528 SoC
clk: rockchip: Add PLL flag ROCKCHIP_PLL_FIXED_MODE
dt-bindings: clock: Document clock and reset unit of RK3528
clk: rockchip: rk3328: fix wrong clk_ref_usb3otg parent
clk: rockchip: rk3568: mark hclk_vi as critical
clk: rockchip: rk3188: use PCLK_CIF0/1 clock IDs on RK3066
dt-bindings: clock: rk3188-common: add PCLK_CIF0/PCLK_CIF1
* clk-samsung:
clk: samsung: Drop unused clk.h and of.h headers
clk: samsung: Add missing mod_devicetable.h header
clk: samsung: add initial exynos7870 clock driver
clk: samsung: introduce Exynos2200 clock driver
clk: samsung: clk-pll: add support for pll_4311
dt-bindings: clock: add clock definitions and documentation for exynos7870 CMU
dt-bindings: clock: add Exynos2200 SoC
clk: samsung: Fix UBSAN panic in samsung_clk_init()
clk: samsung: Fix spelling mistake "stablization" -> "stabilization"
clk: samsung: exynos990: Add CMU_PERIS block
dt-bindings: clock: exynos990: Add CMU_PERIS block
* clk-imx:
clk: imx8mp: inform CCF of maximum frequency of clocks
dt-bindings: clock: imx8m: document nominal/overdrive properties
clk: clk-imx8mp-audiomix: fix dsp/ocram_a clock parents
dt-bindings: clock: imx8mp: add axi clock
|
|
into clk-next
* clk-parent:
clk: check for disabled clock-provider in of_clk_get_hw_from_clkspec()
* clk-renesas: (24 commits)
clk: renesas: r9a09g047: Add clock and reset signals for the TSU IP
clk: renesas: rzv2h: Adjust for CPG_BUS_m_MSTOP starting from m = 1
clk: renesas: r7s9210: Distinguish clocks by clock type
clk: renesas: rzg2l: Remove unneeded nullify checks
clk: renesas: cpg-mssr: Remove obsolete nullify check
clk: renesas: r9a09g057: Add entries for the DMACs
clk: renesas: r9a09g047: Add CANFD clocks and resets
clk: renesas: r9a09g047: Add CRU0 clocks and resets
clk: renesas: rzv2h: Update error message
clk: renesas: rzg2l: Update error message
clk: renesas: r9a09g047: Add ICU clock/reset
clk: renesas: r9a07g043: Fix HP clock source for RZ/Five
clk: renesas: r9a09g047: Add SDHI clocks/resets
clk: renesas: r8a779h0: Add VSPX clock
clk: renesas: r8a779h0: Add FCPVX clock
clk: renesas: r8a08g045: Check the source of the CPU PLL settings
clk: renesas: r9a09g047: Add WDT clocks and resets
clk: renesas: r8a779h0: Add ISP core clocks
clk: renesas: r8a779g0: Add ISP core clocks
clk: renesas: r8a779a0: Add ISP core clocks
...
* clk-mediatek:
clk: mediatek: Add SMI LARBs reset for MT8188
dt-bindings: clock: mediatek: Add SMI LARBs reset for MT8188
clk: mediatek: mt8188-vdo1: Add VDO1_DPI1_HDMI clock for hdmitx
dt-bindings: clock: mediatek,mt8188: Add VDO1_DPI1_HDMI clock
* clk-cleanup:
dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
clk: davinci: remove support for da830
dt-bindings: clock: ti: Convert ti-clkctrl.txt to json-schema
clk: mmp: Fix NULL vs IS_ERR() check
clk: Print an error when clk registration fails
clk: Correct the data types of the variables in clk_calc_new_rates
clk: imgtec: use %pe for better readability of errors while printing
clk: stm32f4: fix an uninitialized variable
clk: keystone: syscon-clk: Do not use syscon helper to build regmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD changes:
- The atmel,dataflash binding has been converted to yaml and the
physmap one constrained. Some logs are improved, error path are
getting reworked a bit, few patches target the use of
str_enabled_disabled().
Raw NAND changes:
- i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
SPI NAND changes:
- OTP support has been brought, and ESMT and Micron manufacturer
drivers implement it.
- Read retry, and Macronix manufacturer driver implement it.
SPI NOR changes:
- Adding support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start
using the scope based mutex cleanup helpers.
There is also a bunch of minor improvements and fixes in drivers
and bindings"
* tag 'mtd/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (34 commits)
dt-bindings: mtd: atmel,dataflash: convert txt to yaml
mtd: mchp48l640: Use str_enable_disable() in mchp48l640_write_prepare()
mtd: rawnand: gpmi: Use str_enabled_disabled() in gpmi_nand_attach_chip()
mtd: mtdpart: Do not supply NULL to printf()
dt-bindings: mtd: gpmi-nand: Add compatible string for i.MX8 chips
mtd: nand: Fix a kdoc comment
mtd: spinand: Improve spinand_info macros style
mtd: spi-nor: drop unused <linux/of_platform.h>
mtd: spi-nor: explicitly include <linux/of.h>
mtd: spi-nor: explicitly include <linux/math64.h>
mtd: spi-nor: macronix: add support for mx66{l2, u1}g45g
mtd: spi-nor: macronix: Add post_sfdp fixups for Quad Input Page Program
mtd: Fix error handling in mtd_device_parse_register() error path
mtd: capture device name setting failure when adding mtd
mtd: Add check for devm_kcalloc()
mtd: Replace kcalloc() with devm_kcalloc()
dt-bindings: mtd: physmap: Ensure all properties are defined
mtd: rawnand: brcmnand: fix PM resume warning
dt-bindings: mtd: mxc-nand: Document fsl,imx31-nand
mtd: spinand: macronix: Add support for read retry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- PlayStation 5 controllers support (Alex Henrie)
- big revamp and modernization of the aged hid-pidff force feedback
driver (Tomasz Pakuła)
- conversion of hid-lg-g15 to standard multicolor LED API (Kate Hsuan)
- improvement of behavior of Human Presence Sensor (HPD) in amd_sfh
driver (Mario Limonciello)
- other assorted fixes, code cleanups and device ID additions
* tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (70 commits)
HID: remove superfluous (and wrong) Makefile entry for CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
HID: Intel-thc-hid: Intel-quickspi: Correct device state names gramatically
HID: wacom: Remove static WACOM_PKGLEN_MAX limit
HID: amd_sfh: Don't show wrong status for amd_sfh_hpd_info()
HID: amd_sfh: Default to HPD disabled
HID: amd_sfh: Allow configuring whether HPD is enabled or disabled
HID: pidff: Fix set_device_control()
HID: pidff: Fix 90 degrees direction name North -> East
HID: pidff: Compute INFINITE value instead of using hardcoded 0xffff
HID: pidff: Clamp effect playback LOOP_COUNT value
HID: pidff: Rename two functions to align them with naming convention
HID: lenovo: silence unreachable code warning
HID: lenovo: Fix to ensure the data as __le32 instead of u32
HID: bpf: add a v6.11+ compatible BPF fixup for the XPPen ACK05 remote
HID: bpf: new hid_bpf_async.h common header
HID: bpf: import new kfunc from v6.10 & v6.11
HID: bpf: add support for the XP-Pen Artist Pro 19 (gen2)
HID: bpf: Added updated Kamvas Pro 19 descriptor
HID: bpf: Suppress bogus F13 trigger on Sirius keyboard full fan shortcut
HID: bpf: Add support for the default firmware mode of the Huion K20
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific, little
about the core changes. Some highlights below:
Core:
- A couple of (rather minor) race fixes in ALSA sequencer code
- A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
- A large series of code conversion to use modern terminology for the
clocking configuration
- Conversions of PM ops with the modern macros in all ASoC drivers
- Clarification of the control operations
- Prepartory work for more generic SoundWire SCDA controls
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
- Conversions of PM ops with the modern macros in the rest drivers
- USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
- HD-audio quirks and fixes ASUS, HP, Lenovo, and others"
* tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (651 commits)
ALSA: hda: tas2781-i2c: Remove unnecessary NULL check before release_firmware()
ALSA: hda: cs35l56: Remove unnecessary NULL check before release_firmware()
ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA
ALSA: hda/realtek: Fix built-in mic assignment on ASUS VivoBook X515UA
ALSA: hda/realtek: Add support for various HP Laptops using CS35L41 HDA
ALSA: timer: Don't take register_mutex with copy_from/to_user()
ASoC: SDCA: Correct handling of selected mode DisCo property
ASoC: amd: yc: update quirk data for new Lenovo model
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3247
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3315
ASoC: SOF: mediatek: Commonize duplicated functions
ASoC: dmic: Fix NULL pointer dereference
ASoC: wm8904: add DMIC support
ASoC: wm8904: get platform data from DT
ASoC: dt-bindings: wm8904: Add DMIC, GPIO, MIC and EQ support
ASoC: wm8904: Don't touch GPIO configs set to 0xFFFF
of: Add of_property_read_u16_index
ALSA: oxygen: Fix dependency on CONFIG_PM_SLEEP
ASoC: ops: Apply platform_max after deciding control type
ASoC: ops: Remove some unnecessary local variables
...
|
|
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After merging the apparmor tree, today's linux-next build (x86_64
allmodconfig) failed like this:
security/apparmor/af_unix.c: In function 'unix_state_double_lock':
security/apparmor/af_unix.c:627:17: error: implicit declaration of function 'unix_state_lock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
627 | unix_state_lock(sk1);
| ^~~~~~~~~~~~~~~
| unix_state_double_lock
security/apparmor/af_unix.c: In function 'unix_state_double_unlock':
security/apparmor/af_unix.c:642:17: error: implicit declaration of function 'unix_state_unlock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
642 | unix_state_unlock(sk1);
| ^~~~~~~~~~~~~~~~~
| unix_state_double_lock
Caused by commit
c05e705812d1 ("apparmor: add fine grained af_unix mediation")
interacting with commit
84960bf24031 ("af_unix: Move internal definitions to net/unix/.")
from the net-next tree.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patch.msgid.link/20250326150148.72d9138d@canb.auug.org.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF for the case of sandboxer
tools, init systems, or runtime containers launching programs sandboxing
themselves in an inconsistent way. Setting this flag should only
depends on runtime configuration (i.e. not hardcoded).
We don't create a new ruleset's option because this should not be part
of the security policy: only the task that enforces the policy (not the
one that create it) knows if itself or its children may request denied
actions.
This is the first and only flag that can be set without actually
restricting the caller (i.e. without providing a ruleset).
Extend struct landlock_cred_security with a u8 log_subdomains_off.
struct landlock_file_security is still 16 bytes.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Closes: https://github.com/landlock-lsm/linux/issues/3
Link: https://lore.kernel.org/r/20250320190717.2287696-19-mic@digikod.net
[mic: Fix comment]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Most of the time we want to log denied access because they should not
happen and such information helps diagnose issues. However, when
sandboxing processes that we know will try to access denied resources
(e.g. unknown, bogus, or malicious binary), we might want to not log
related access requests that might fill up logs.
By default, denied requests are logged until the task call execve(2).
If the LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF flag is set, denied
requests will not be logged for the same executed file.
If the LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON flag is set, denied
requests from after an execve(2) call will be logged.
The rationale is that a program should know its own behavior, but not
necessarily the behavior of other programs.
Because LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF is set for a specific
Landlock domain, it makes it possible to selectively mask some access
requests that would be logged by a parent domain, which might be handy
for unprivileged processes to limit logs. However, system
administrators should still use the audit filtering mechanism. There is
intentionally no audit nor sysctl configuration to re-enable these logs.
This is delegated to the user space program.
Increment the Landlock ABI version to reflect this interface change.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-18-mic@digikod.net
[mic: Rename variables and fix __maybe_unused]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Asynchronously log domain information when it first denies an access.
This minimize the amount of generated logs, which makes it possible to
always log denials for the current execution since they should not
happen. These records are identified with the new AUDIT_LANDLOCK_DOMAIN
type.
The AUDIT_LANDLOCK_DOMAIN message contains:
- the "domain" ID which is described;
- the "status" which can either be "allocated" or "deallocated";
- the "mode" which is for now only "enforcing";
- for the "allocated" status, a minimal set of properties to easily
identify the task that loaded the domain's policy with
landlock_restrict_self(2): "pid", "uid", executable path ("exe"), and
command line ("comm");
- for the "deallocated" state, the number of "denials" accounted to this
domain, which is at least 1.
This requires each domain to save these task properties at creation
time in the new struct landlock_details. A reference to the PID is kept
for the lifetime of the domain to avoid race conditions when
investigating the related task. The executable path is resolved and
stored to not keep a reference to the filesystem and block related
actions. All these metadata are stored for the lifetime of the related
domain and should then be minimal. The required memory is not accounted
to the task calling landlock_restrict_self(2) contrary to most other
Landlock allocations (see related comment).
The AUDIT_LANDLOCK_DOMAIN record follows the first AUDIT_LANDLOCK_ACCESS
record for the same domain, which is always followed by AUDIT_SYSCALL
and AUDIT_PROCTITLE. This is in line with the audit logic to first
record the cause of an event, and then add context with other types of
record.
Audit event sample for a first denial:
type=LANDLOCK_ACCESS msg=audit(1732186800.349:44): domain=195ba459b blockers=ptrace opid=1 ocomm="systemd"
type=LANDLOCK_DOMAIN msg=audit(1732186800.349:44): domain=195ba459b status=allocated mode=enforcing pid=300 uid=0 exe="/root/sandboxer" comm="sandboxer"
type=SYSCALL msg=audit(1732186800.349:44): arch=c000003e syscall=101 success=no [...] pid=300 auid=0
Audit event sample for a following denial:
type=LANDLOCK_ACCESS msg=audit(1732186800.372:45): domain=195ba459b blockers=ptrace opid=1 ocomm="systemd"
type=SYSCALL msg=audit(1732186800.372:45): arch=c000003e syscall=101 success=no [...] pid=300 auid=0
Log domain deletion with the "deallocated" state when a domain was
previously logged. This makes it possible for log parsers to free
potential resources when a domain ID will never show again.
The number of denied access requests is useful to easily check how many
access requests a domain blocked and potentially if some of them are
missing in logs because of audit rate limiting, audit rules, or Landlock
log configuration flags (see following commit).
Audit event sample for a deletion of a domain that denied something:
type=LANDLOCK_DOMAIN msg=audit(1732186800.393:46): domain=195ba459b status=deallocated denials=2
Cc: Günther Noack <gnoack@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-11-mic@digikod.net
[mic: Update comment and GFP flag for landlock_log_drop_domain()]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add a new AUDIT_LANDLOCK_ACCESS record type dedicated to an access
request denied by a Landlock domain. AUDIT_LANDLOCK_ACCESS indicates
that something unexpected happened.
For now, only denied access are logged, which means that any
AUDIT_LANDLOCK_ACCESS record is always followed by a SYSCALL record with
"success=no". However, log parsers should check this syscall property
because this is the only sign that a request was denied. Indeed, we
could have "success=yes" if Landlock would support a "permissive" mode.
We could also add a new field to AUDIT_LANDLOCK_DOMAIN for this mode
(see following commit).
By default, the only logged access requests are those coming from the
same executed program that enforced the Landlock restriction on itself.
In other words, no audit record are created for a task after it called
execve(2). This is required to avoid log spam because programs may only
be aware of their own restrictions, but not the inherited ones.
Following commits will allow to conditionally generate
AUDIT_LANDLOCK_ACCESS records according to dedicated
landlock_restrict_self(2)'s flags.
The AUDIT_LANDLOCK_ACCESS message contains:
- the "domain" ID restricting the action on an object,
- the "blockers" that are missing to allow the requested access,
- a set of fields identifying the related object (e.g. task identified
with "opid" and "ocomm").
The blockers are implicit restrictions (e.g. ptrace), or explicit access
rights (e.g. filesystem), or explicit scopes (e.g. signal). This field
contains a list of at least one element, each separated with a comma.
The initial blocker is "ptrace", which describe all implicit Landlock
restrictions related to ptrace (e.g. deny tracing of tasks outside a
sandbox).
Add audit support to ptrace_access_check and ptrace_traceme hooks. For
the ptrace_access_check case, we log the current/parent domain and the
child task. For the ptrace_traceme case, we log the parent domain and
the current/child task. Indeed, the requester and the target are the
current task, but the action would be performed by the parent task.
Audit event sample:
type=LANDLOCK_ACCESS msg=audit(1729738800.349:44): domain=195ba459b blockers=ptrace opid=1 ocomm="systemd"
type=SYSCALL msg=audit(1729738800.349:44): arch=c000003e syscall=101 success=no [...] pid=300 auid=0
A following commit adds user documentation.
Add KUnit tests to check reading of domain ID relative to layer level.
The quick return for non-landlocked tasks is moved from task_ptrace() to
each LSM hooks.
It is not useful to inline the audit_enabled check because other
computation are performed by landlock_log_denial().
Use scoped guards for RCU read-side critical sections.
Cc: Günther Noack <gnoack@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-10-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Extract code from dump_common_audit_data() into the audit_log_lsm_data()
helper. This helps reuse common LSM audit data while not abusing
AUDIT_AVC records because of the common_lsm_audit() helper.
Depends-on: 7ccbe076d987 ("lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set")
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: James Morris <jmorris@namei.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-2-mic@digikod.net
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
From: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
This patch series is focused on improving the compatibility and usability of the
hid-pidff force feedback driver. Last patch introduces a new, universal driver
for PID devices that need some special handling like report fixups, remapping the
button range, managing new pidff quirks and setting desirable fuzz/flat values.
This work has been done in the span of the past months with the help of the great
Linux simracing community, with a little input from sim flight fans from FFBeast.
No changes interfere with compliant and currently working PID devices.
"Generic" codepath was tested as well with Moza and Simxperience AccuForce v2.
I'm not married to the name. It's what we used previously, but if "universal" is
confusing (pidff is already the generic driver), we can come up with something
better like "hid-quirky-pidff" :)
With v8 and tiny finx in v9, all the outstanding issues were resolved,
additional pidff issues were fixed and hid-pidff defines moved to a dedicated
header file. This patch series could be considered done bar any comments and
requests from input maintainers.
I could save more then a dozen lines of code by changing simple if statements
to only occupy on line instead of two in there's a need for that.
|
|
- intel-ish Kbuild cleanup (Jiri Kosina)
|
|
- differentiate warning for reserved item tag from unknown item tag, in
accordance to 6.2.2.4 from the HID specification 1.11 (Tatsuya S)
|
|
Instead of a bool field in struct io_sr_msg, use REQ_F_IMPORT_BUFFER to
track whether io_send_zc() has already imported the buffer. This flag
already serves a similar purpose for sendmsg_zc and {read,write}v_fixed.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20250325143943.1226467-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For PCITEST_MSI we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSI, since we want to test if MSI works.
For PCITEST_MSIX we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSIX, since we want to test if MSI works.
For PCITEST_LEGACY_IRQ we really want to set PCITEST_SET_IRQTYPE
explicitly to PCITEST_IRQ_TYPE_INTX, since we want to test if INTx
works.
However, for PCITEST_WRITE, PCITEST_READ, PCITEST_COPY, we really don't
care which IRQ type that is used, we just want to use a IRQ type that is
supported by the EPC.
The old behavior was to always use MSI for PCITEST_WRITE, PCITEST_READ,
PCITEST_COPY, was to always set IRQ type to MSI before doing the actual
test, however, there are EPC drivers that do not support MSI.
Add a new PCITEST_IRQ_TYPE_AUTO, that will use the CAPS register to see
which IRQ types the endpoint supports, and use one of the supported IRQ
types.
For backwards compatibility, if the endpoint does not expose any supported
IRQ type in the CAPS register, simply fallback to using MSI, as it was
unconditionally done before.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-16-cassel@kernel.org
|
|
In struct pci_epc_features, an EPC driver can already specify if they
support MSI (by setting msi_capable) and MSI-X (by setting msix_capable).
Thus, for consistency, allow an EPC driver to specify if it supports
INTx interrupts as well (by setting intx_capable).
Since this struct is zero initialized, EPC drivers that want to claim
INTx support will need to set intx_capable to true.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[kwilczynski: add missing kernel-doc for "intx_capable"]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-13-cassel@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets
- vim2m: print device name after registering device
- Synopsys DesignWare HDMI RX Driver and various fixes
- cec/printk fixes and the removal of the vidioc_g/s_ctrl and
vidioc_queryctrl callbacks
- AVerMedia H789-C PCIe support and rc-core structs padding
- Several camera sensor patches
- uvcvideo improvements
- visl: Fix ERANGE error when setting enum controls
- codec fixes
- V4L2 camera sensor patches mostly
- chips-media: wave5: Fixes
- Add SDM670 camera subsystem
- Qualcomm iris video decoder driver
- dt-bindings: update clocks for sc7280-camss
- various fixes and enhancements
* tag 'media/v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (264 commits)
media: pci: mgb4: include linux/errno.h
media: synopsys: hdmirx: Fix signedness bug in hdmirx_parse_dt()
media: platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets
media: vim2m: print device name after registering device
media: vivid: Introduce VIDEO_VIVID_OSD
media: vivid: Move all fb_info references into vivid-osd
media: platform: synopsys: hdmirx: Optimize struct snps_hdmirx_dev
media: platform: synopsys: hdmirx: Remove unused HDMI audio CODEC relics
media: platform: synopsys: hdmirx: Remove duplicated header inclusion
media: qcom: Clean up Kconfig dependencies
media: dvb-frontends: tda10048: Make the range of z explicit.
media: platform: stm32: Add check for clk_enable()
media: xilinx-tpg: fix double put in xtpg_parse_of()
media: siano: Fix error handling in smsdvb_module_init()
media: c8sectpfe: Call of_node_put(i2c_bus) only once in c8sectpfe_probe()
media: i2c: tda1997x: Call of_node_put(ep) only once in tda1997x_parse_dt()
dt-bindings: media: mediatek,vcodec: Revise description
dt-bindings: media: mediatek,jpeg: Relax IOMMU max item count
media: v4l2-dv-timings: prevent possible overflow in v4l2_detect_gtf()
media: rockchip: rga: fix rga offset lookup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM
pmdomain providers:
- arm: Remove redundant state verification for the SCMI PM domain
- bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP
- rockchip: Add support for regulators
- rockchip: Use SMC call to properly inform firmware
- sunxi: Add V853 ppu support
- thead: Add support for RISC-V TH1520 power-domains
firmware:
- Add support for the AON firmware protocol for RISC-V THEAD
cpuidle-psci:
- Update section in MAINTAINERS for cpuidle-psci
- Add trace support for PSCI domain-idlestates"
* tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (29 commits)
firmware: thead: add CONFIG_MAILBOX dependency
firmware: thead,th1520-aon: Fix use after free in th1520_aon_init()
pmdomain: arm: scmi_pm_domain: Remove redundant state verification
pmdomain: thead: fix TH1520_AON_PROTOCOL dependency
pmdomain: thead: Add power-domain driver for TH1520
dt-bindings: power: Add TH1520 SoC power domains
firmware: thead: Add AON firmware protocol driver
dt-bindings: firmware: thead,th1520: Add support for firmware node
pmdomain: rockchip: add regulator dependency
pmdomain: rockchip: add regulator support
pmdomain: rockchip: fix rockchip_pd_power error handling
pmdomain: rockchip: reduce indentation in rockchip_pd_power
pmdomain: rockchip: forward rockchip_do_pmu_set_power_domain errors
pmdomain: rockchip: cleanup mutex handling in rockchip_pd_power
dt-bindings: power: rockchip: add regulator support
pmdomain: rockchip: Fix build error
pmdomain: imx: gpcv2: use proper helper for property detection
MAINTAINERS: Update section for cpuidle-psci
pmdomain: rockchip: Check if SMC could be handled by TA
cpuidle: psci: Add trace for PSCI domain idle
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC host:
- atmel-mci: Convert DT bindings to json schema
- dw_mmc: Add support for the Exynos7870 variant
- dw_mmc-rockchip: Add support for the RK3562/3528 variants
- omap: Fix potential memory leak in the probe error path
- renesas_sdhi: Add support for RZ/G3E variants
- sdhci: Disable SD card clock before changing parameters
- sdhci-esdhc-imx: Add support for the i.MX94 variant
- sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants
- sdhci-omap: Disable aggressive PM for eMMC/SD-cards
- sdhci-pci-core: Wait for VDD to settle on card power off
- sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY
- sunxi-mmc: Add support for the A523 variant
MEMSTICK:
- rtsx_usb_ms: Fix potential use-after-free during remove"
* tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: core: Remove redundant null check
mmc: host: Wait for Vdd to settle on card power off
mmc: omap: Fix memory leak in mmc_omap_new_slot
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
mmc: renesas_sdhi: fix error code in renesas_sdhi_probe()
mmc: sdhci-pxav3: set NEED_RSP_BUSY capability
mmc: sdhci-omap: Disable MMC_CAP_AGGRESSIVE_PM for eMMC/SD
tty: mmc: sdio: use bool for cts and remove parentheses
dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523
dt-bindings: mmc: sunxi: Simplify compatible string listing
dt-bindings: mmc: sdhci-of-dwcmhsc: Add compatible string for RK3528
dt-bindings: mmc: rockchip-dw-mshc: Add compatible string for RK3528
mmc: renesas_sdhi: Add support for RZ/G3E SoC
dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support
dt-bindings: mmc: rockchip-dw-mshc: Add support for rk3562
dt-bindings: mmc: Add support for rk3562 eMMC
mmc: core: Trim trailing whitespace from card product names
dt-bindings: mmc: atmel,hsmci: Convert to json schema
dt-bindings: mmc: mmc-slot: Make compatible property optional
dt-bindings: mmc: fsl-imx-esdhc: Add i.MX94 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are no new drivers this time but several changes to the core
GPIO framework and various driver updates.
This release cycle, we're starting a relatively straightforward but
tedious rework of the GPIO consumer API: for historical reasons, the
gpiod_set_value() variants would return void. Not only that but the
GPIO provider interface does not even allow drivers to return a value
to GPIO core. This is because initial GPIO controllers would be MMIO
based and could not fail. We've had I2C, SPI and USB controllers for
years too but no way of indicating failures to callers.
This changes the consumer interface, adds new provider callbacks and
starts converting the drivers under drivers/gpio/ to using them. Once
this gets upstream, we'll keep on converting GPIO drivers that live
elsewhere and once there are no more users of the old callbacks, we'll
remove them and rename the new ones to the previous name. I imagine
the last step would happen in one sweeping change like what you did
for the remove_new() -> remove() renaming.
We've also addressed an issue where invalid return values from GPIO
drivers would get propagated to user-space by adding some
GPIO-core-level sanitization. Again: not a complex change but way
overdue.
Other than that: lots of driver and core refactoring, DT-bindings
changes and some other minor changes like coding style fixes or header
reordering.
GPIO core:
- add sanitization of return values of GPIO provider callbacks so
that invalid ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers
that return an integer and allow to indicate driver errors to the
GPIO core
- change the interface of all gpiod_set_value() variants to return an
integer thus becoming able to indicate failures in the underlying
layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler
interface to gpiod_set_array_value_cansleep() and use it across
several drivers treewide
- reduce the number of atomic reads of the descriptor flags in
gpiolib debugfs code
- simplify for_each_hwgpio_in_range() and
for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE
subsystem disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't
allow drivers to set it as it should only be handled by GPIO core
and start actually enforcing it in GPIO core for *all* drivers, not
only the ones implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its
device in order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the
new value setter callbacks
- convert several drivers to using automatic lock guards from
cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by()
and bits.h macros)
- refactor gpio-latch (use generic device properties, lock guards and
some local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from
GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO
devices into its own library
- use str_enable_disable(), str_high_low() and other string helpers
where applicable
- extend the gpio-mmio abstraction layer to allow calling into the
pinctrl back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list"
* tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (119 commits)
gpio: TODO: add an item to track reworking the sysfs interface
gpio: TODO: add an item to track the conversion to the new value setters
gpio: TODO: add delimiters between tasks for better readability
gpio: TODO: remove the pinctrl integration task
gpio: TODO: remove task duplication
gpio: TODO: remove the item about the new debugfs interface
gpio: da9055: use new line value setter callbacks
gpio: da9052: use new line value setter callbacks
gpio: cs5535: use new line value setter callbacks
gpio: crystalcove: use new line value setter callbacks
gpio: cros-ec: use new line value setter callbacks
gpio: creg-snps: use new line value setter callbacks
gpio: cgbc: use new line value setter callbacks
gpio: bt8xx: use new line value setter callbacks
gpio: bt8xx: use lock guards
gpio: bt8xx: allow to build the module with COMPILE_TEST=y
gpio: bd9571mwv: use new line value setter callbacks
gpio: bd71828: use new line value setter callbacks
gpio: bd71815: use new line value setter callbacks
gpio: bcm-kona: use new line value setter callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for HTU31
- Congatec Board Controller monitoring driver
- Driver for TI INA233 Current and Power Monitor
Support for additional chips or boards in existing drivers:
- pmbus/ltc2978: Add support for LT717x and LTM4673
- asus-ec-sensors: Add PRIME X670E-PRO WIFI
- k10temp: Add support for cyan skillfish
- nct6683: Add customer ID for AMD BC-250
- lm90: Add support for NCT7716, NCT7717 and NCT7718
Other notable improvements in existing drivers:
- emc2305: Add devicetree support, and use
devm_thermal_of_cooling_device_register
- acpi_power_meter: Convert to with_info API
- dell-smm: Increase the number of fans
- pmbus/core: Optimize debugfs support and use i2c_client
debugfs directory
- hwmon core: Fix the missing of 'average' word in
hwmon_power_attr_templates
- Various drivers: Use per-client debugfs entry provided by
I2C subsystem"
* tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
hwmon: emc2305: Use devm_thermal_of_cooling_device_register
hwmon: emc2305: Add OF support
dt-bindings: hwmon: Add Microchip emc2305 support
dt-bindings: hwmon: Drop stray blank line in the header
hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register
hwmon: add driver for HTU31
dt-bindings: hwmon: Add description for sensor HTU31
hwmon: Add driver for TI INA233 Current and Power Monitor
dt-bindings: hwmon: ti,ina2xx: Add INA233 device
hwmon: Add Congatec Board Controller monitoring driver
hwmon: (pmbus/ltc2978) add support for lt717x
dt-bindings: hwmon: ltc2978: add support for LT717x
hwmon: (pmbus/ltc2978) Add support for LT717x - docs
hwmon: (dell-smm) Increment the number of fans
hwmon: (ntc_thermistor) return error instead of clipping on OOB
hwmon: (pt5161l) Use per-client debugfs entry
hwmon: Fix the missing of 'average' word in hwmon_power_attr_templates
hwmon: (acpi_power_meter) Fix the fake power alarm reporting
hwmon: (gpio-fan) Add missing mutex locks
dt-bindings: hwmon: gpio-fan: Add optional regulator support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Here comes the usual mix of cleanups, new dt-bindings for existing
drivers and nexus nodes; and a new driver for the pwm subsystem.
Patches were contributed by Andy Shevchenko, Chen Wang, Chukun Pan,
Frank Li, Herve Codina, Kever Yang, and Nam Cao. Patch feedback was
provided by Andy Shevchenko, Conor Dooley, Daniel Mack, Duje
Mihanović, Heiko Stuebner, Herve Codina, Krzysztof Kozlowski, Neil
Armstrong, Rob Herring, and Zack Rusin. Thanks to all of them"
* tag 'pwm/for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
dt-bindings: pwm: imx: Add i.MX93, i.MX94 and i.MX95 support
dt-bindings: pwm: rockchip: Add rockchip,rk3528-pwm
pwm: stmpe: Allow to compile as a module
pwm: Check for CONFIG_PWM using IS_REACHABLE() in main header
dt-bindings: pwm: rockchip: Add rockchip,rk3562-pwm
pwm: Strengthen dependency for PWM_SIFIVE
pwm: clps711x: Drop of_match_ptr() usage for .of_match_table
pwm: pca9685: Drop ACPI_PTR() and of_match_ptr()
pwm: Add support for pwm nexus dt bindings
dt-bindings: pwm: Add support for PWM nexus node
pwm: Add upgrade path to #pwm-cells = <3> for users of of_pwm_single_xlate()
pwm: gpio: Switch to use hrtimer_setup()
pwm: sophgo: add driver for Sophgo SG2042 PWM
dt-bindings: pwm: sophgo: add PWM controller for SG2042
pwm: lpss: Only include <linux/pwm.h> where needed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The biggest change for SPI this release is the addition of offload
support from David Lechner, allowing the hardware to trigger SPI
transactions autonomously. The initial use case is for triggering IIO
operations but there are other applications where having the hardware
ready to go at a minimal signal is useful for synchronising with
external inputs (eg, interrupt handling) or reducing latency (eg, CAN
networking).
Otherwise there's the usual fixes, improvements and cleanups, plus
support for a bunch of new devices.
- Support for offloading support from David Lechner
- Support for GOcontrol1 Moduline modules, Mediatek MT7988, NXP
i.MX94, Qualcomm SPI NAMD, Rockchip RK3562, Sophogo SG2044 and ST
STM32 OSPI"
* tag 'spi-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
spi: spi-mem: Introduce a default ->exec_op() debug log
spi: dt-bindings: cdns,qspi-nor: Require some peripheral properties
spi: dt-bindings: cdns,qspi-nor: Deprecate the Cadence compatible alone
spi: dt-bindings: cdns,qspi-nor: Be more descriptive regarding what this controller is
spi: stm32-ospi: Include "gpio/consumer.h"
MAINTAINERS: adjust the file entry in GOCONTROLL MODULINE MODULE SLOT
spi: spi-qpic-snand: avoid memleak in qcom_spi_ecc_init_ctx_pipelined()
spi: spi-mux: Fix coverity issue, unchecked return value
spi: sophgo: fix incorrect type for ret in sg2044_spifmc_write()
spi: sg2044-nor: fix uninitialized variable in probe
spi: sg2044-nor: fix signedness bug in sg2044_spifmc_write()
spi: sg2044-nor: Convert to dev_err_probe()
spi: sg2044-nor: Fully convert to device managed resources
dt-bindings: spi: add compatibles for mt7988
spi: spidev: Add an entry for the gocontroll moduline module slot
MAINTAINERS: add maintainer for the GOcontroll Moduline module slot
dt-bindings: connector: Add the GOcontroll Moduline module slot bindings
dt-bindings: vendor-prefixes: add GOcontroll
spi: Use inclusive language
spi: cadence-qspi: Improve spi memory performance
...
|
