| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Three fixes for looping in the NFSv4 state manager delegation code
- Fix for the NFSv4 state XDR code (Neil Brown)
- Fix a leaked reference in nfs_lock_and_join_requests()
- Fix a use-after-free in the delegation return code
Features:
- Implement the NFSv4.2 copy offload OFFLOAD_STATUS operation to
allow monitoring of an in-progress copy
- Add a mount option to force NFSv3/NFSv4 to use READDIRPLUS in a
getdents() call
- SUNRPC now allows some basic management of an existing RPC client's
connections using sysfs
- Improvements to the automated teardown of a NFS client when the
container it was initiated from gets killed
- Improvements to prevent tasks from getting stuck in a killable wait
state after calling exit_signals()"
* tag 'nfs-for-6.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (29 commits)
nfs: Add missing release on error in nfs_lock_and_join_requests()
NFSv4: Check for delegation validity in nfs_start_delegation_return_locked()
NFS: Don't allow waiting for exiting tasks
SUNRPC: Don't allow waiting for exiting tasks
NFSv4: Treat ENETUNREACH errors as fatal for state recovery
NFSv4: clp->cl_cons_state < 0 signifies an invalid nfs_client
NFSv4: Further cleanups to shutdown loops
NFS: Shut down the nfs_client only after all the superblocks
SUNRPC: rpc_clnt_set_transport() must not change the autobind setting
SUNRPC: rpcbind should never reset the port to the value '0'
pNFS/flexfiles: Report ENETDOWN as a connection error
pNFS/flexfiles: Treat ENETUNREACH errors as fatal in containers
NFS: Treat ENETUNREACH errors as fatal in containers
NFS: Add a mount option to make ENETUNREACH errors fatal
sunrpc: Add a sysfs file for one-step xprt deletion
sunrpc: Add a sysfs file for adding a new xprt
sunrpc: Add a sysfs files for rpc_clnt information
sunrpc: Add a sysfs attr for xprtsec
NFS: Add implid to sysfs
NFS: Extend rdirplus mount option with "force|none"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Allow connection to server to time out (Joanne Koong)
- If server doesn't support creating a hard link, return EPERM rather
than ENOSYS (Matt Johnston)
- Allow file names longer than 1024 chars (Bernd Schubert)
- Fix a possible race if request on io_uring queue is interrupted
(Bernd Schubert)
- Misc fixes and cleanups
* tag 'fuse-update-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove unneeded atomic set in uring creation
fuse: fix uring race condition for null dereference of fc
fuse: Increase FUSE_NAME_MAX to PATH_MAX
fuse: Allocate only namelen buf memory in fuse_notify_
fuse: add default_request_timeout and max_request_timeout sysctls
fuse: add kernel-enforced timeout option for requests
fuse: optmize missing FUSE_LINK support
fuse: Return EPERM rather than ENOSYS from link()
fuse: removed unused function fuse_uring_create() from header
fuse: {io-uring} Fix a possible req cancellation race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Add a new maintainer for configfs
- Fix exportfs module description
- Place flexible array memeber at the end of an internal struct in the
mount code
- Add new maintainer for netfslib as Jeff Layton is stepping down as
current co-maintainer
- Fix error handling in cachefiles_get_directory()
- Cleanup do_notify_pidfd()
- Fix syscall number definitions in pidfd selftests
- Fix racy usage of fs_struct->in exec during multi-threaded exec
- Ensure correct exit code is reported when pidfs_exit() is called from
release_task() for a delayed thread-group leader exit
- Fix conflicting iomap flag definitions
* tag 'vfs-6.15-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix conflicting values of iomap flags
fs: namespace: Avoid -Wflex-array-member-not-at-end warning
MAINTAINERS: configfs: add Andreas Hindborg as maintainer
exportfs: add module description
exit: fix the usage of delay_group_leader->exit_code in do_notify_parent() and pidfs_exit()
netfs: add Paulo as maintainer and remove myself as Reviewer
cachefiles: Fix oops in vfs_mkdir from cachefiles_get_directory
exec: fix the racy usage of fs_struct->in_exec
selftests/pidfd: fixes syscall number defines
pidfs: cleanup the usage of do_notify_pidfd()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull more printk updates from Petr Mladek:
- Silence warnings about candidates for ‘gnu_print’ format attribute
* tag 'printk-for-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsnprintf: Silence false positive GCC warning for va_format()
vsnprintf: Drop unused const char fmt * in va_format()
vsnprintf: Mark binary printing functions with __printf() attribute
tracing: Mark binary printing functions with __printf() attribute
seq_file: Mark binary printing functions with __printf() attribute
seq_buf: Mark binary printing functions with __printf() attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Two cleanups this cycle. The larger of which is the removal of a
private allocator within kdb and replacing it with regular memory
allocation. The other adopts the simplified version of strscpy() in a
couple of places in kdb"
* tag 'kgdb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Remove optional size arguments from strscpy() calls
kdb: remove usage of static environment buffer
|
|
Add helper of for_each_mp_bvec() for io_uring to import fixed kernel
buffer.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250325135155.935398-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a possible race between removing a cgroup diectory that is
a partition root and the creation of a new partition. The partition
to be removed can be dying but still online, it doesn't not currently
participate in checking for exclusive CPUs conflict, but the exclusive
CPUs are still there in subpartitions_cpus and isolated_cpus. These
two cpumasks are global states that affect the operation of cpuset
partitions. The exclusive CPUs in dying cpusets will only be removed
when cpuset_css_offline() function is called after an RCU delay.
As a result, it is possible that a new partition can be created with
exclusive CPUs that overlap with those of a dying one. When that dying
partition is finally offlined, it removes those overlapping exclusive
CPUs from subpartitions_cpus and maybe isolated_cpus resulting in an
incorrect CPU configuration.
This bug was found when a warning was triggered in
remote_partition_disable() during testing because the subpartitions_cpus
mask was empty.
One possible way to fix this is to iterate the dying cpusets as well and
avoid using the exclusive CPUs in those dying cpusets. However, this
can still cause random partition creation failures or other anomalies
due to racing. A better way to fix this race is to reset the partition
state at the moment when a cpuset is being killed.
Introduce a new css_killed() CSS function pointer and call it, if
defined, before setting CSS_DYING flag in kill_css(). Also update the
css_is_dying() helper to use the CSS_DYING flag introduced by commit
33c35aa48178 ("cgroup: Prevent kill_css() from being called more than
once") for proper synchronization.
Add a new cpuset_css_killed() function to reset the partition state of
a valid partition root if it is being killed.
Fixes: ee8dde0cd2ce ("cpuset: Add new v2 cpuset.sched.partition flag")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
|
|
Pull VFIO updates from Alex Williamson:
- Relax IGD support code to match display class device rather than
specifically requiring a VGA device (Tomita Moeko)
- Accelerate DMA mapping of device MMIO by iterating at PMD and PUD
levels to take advantage of huge pfnmap support added in v6.12
(Alex Williamson)
- Extend virtio vfio-pci variant driver to include migration support
for block devices where enabled by the PF (Yishai Hadas)
- Virtualize INTx PIN register for devices where the platform does not
route legacy PCI interrupts for the device and the interrupt is
reported as IRQ_NOTCONNECTED (Alex Williamson)
* tag 'vfio-v6.15-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Handle INTx IRQ_NOTCONNECTED
vfio/virtio: Enable support for virtio-block live migration
vfio/type1: Use mapping page mask for pfnmaps
mm: Provide address mask in struct follow_pfnmap_args
vfio/type1: Use consistent types for page counts
vfio/type1: Use vfio_batch for vaddr_get_pfns()
vfio/type1: Convert all vaddr_get_pfns() callers to use vfio_batch
vfio/type1: Catch zero from pin_user_pages_remote()
vfio/pci: match IGD devices in display controller class
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Two significant new items:
- Allow reporting IOMMU HW events to userspace when the events are
clearly linked to a device.
This is linked to the VIOMMU object and is intended to be used by a
VMM to forward HW events to the virtual machine as part of
emulating a vIOMMU. ARM SMMUv3 is the first driver to use this
mechanism. Like the existing fault events the data is delivered
through a simple FD returning event records on read().
- PASID support in VFIO.
The "Process Address Space ID" is a PCI feature that allows the
device to tag all PCI DMA operations with an ID. The IOMMU will
then use the ID to select a unique translation for those DMAs. This
is part of Intel's vIOMMU support as VT-D HW requires the
hypervisor to manage each PASID entry.
The support is generic so any VFIO user could attach any
translation to a PASID, and the support should work on ARM SMMUv3
as well. AMD requires additional driver work.
Some minor updates, along with fixes:
- Prevent using nested parents with fault's, no driver support today
- Put a single "cookie_type" value in the iommu_domain to indicate
what owns the various opaque owner fields"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (49 commits)
iommufd: Test attach before detaching pasid
iommufd: Fix iommu_vevent_header tables markup
iommu: Convert unreachable() to BUG()
iommufd: Balance veventq->num_events inc/dec
iommufd: Initialize the flags of vevent in iommufd_viommu_report_event()
iommufd/selftest: Add coverage for reporting max_pasid_log2 via IOMMU_HW_INFO
iommufd: Extend IOMMU_GET_HW_INFO to report PASID capability
vfio: VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT support pasid
vfio-iommufd: Support pasid [at|de]tach for physical VFIO devices
ida: Add ida_find_first_range()
iommufd/selftest: Add coverage for iommufd pasid attach/detach
iommufd/selftest: Add test ops to test pasid attach/detach
iommufd/selftest: Add a helper to get test device
iommufd/selftest: Add set_dev_pasid in mock iommu
iommufd: Allow allocating PASID-compatible domain
iommu/vt-d: Add IOMMU_HWPT_ALLOC_PASID support
iommufd: Enforce PASID-compatible domain for RID
iommufd: Support pasid attach/replace
iommufd: Enforce PASID-compatible domain in PASID path
iommufd/device: Add pasid_attach array to track per-PASID attach
...
|
|
This merges in the removal of the IBM CAPI "cxl" driver.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly assorted updates of thermal drivers used on ARM
platforms:
- Use dev_err_probe() helpers to simplify the init code in the Qoriq
thermal driver (Frank Li)
- Power down the Qoriq's TMU at suspend time (Alice Guo)
- Add ipq5332, ipq5424 compatible to the QCom's tsens thermal driver
and TSENS enable / calibration support for V2 (Praveenkumar I)
- Add missing rk3328 mapping entry (Trevor Woerner)
- Remove duplicate struct declaration from the thermal core header
file (Xueqin Luo)
- Disable the monitoring mode during suspend in the LVTS Mediatek
driver to prevent temperature acquisition glitches (Nícolas F. R.
A. Prado)
- Disable Stage 3 thermal threshold in the LVTS Mediatek driver
because it disables the suspend ability and does not have an
interrupt handler (Nícolas F. R. A. Prado)
- Fix low temperature offset interrupt in the LVTS Mediatek driver to
prevent multiple interrupts from triggering when the system is at
its normal functionning temperature (Nícolas F. R. A. Prado)
- Enable interrupts in the LVTS Mediatek driver only on sensors that
are in use (Nícolas F. R. A. Prado)
- Add the BCM74110 compatible DT binding and the corresponding code
to support a chip based on a different process node than previous
chips (Florian Fainelli)
- Correct indentation and style in DTS example (Krzysztof Kozlowski)
- Unify hexadecimal annotatation in the rcar_gen3 driver (Niklas
Söderlund)
- Factor out the code logic to read fuses on Gen3 and Gen4 in the
rcar_gen3 thermal driver (Niklas Söderlund)
- Drop unused driver data from the QCom's spmi temperature alarm
driver (Johan Hovold)"
* tag 'thermal-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data
thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4
thermal: rcar_gen3: Use lowercase hex constants
dt-bindings: thermal: Correct indentation and style in DTS example
thermal/drivers/brcmstb_thermal: Add support for BCM74110
dt-bindings: thermal: Update for BCM74110
thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors
thermal/drivers/mediatek/lvts: Start sensor interrupts disabled
thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold
thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold
thermal/drivers/mediatek/lvts: Disable monitor mode during suspend
thermal: core: Remove duplicate struct declaration
thermal/drivers/rockchip: Add missing rk3328 mapping entry
thermal/drivers/tsens: Add TSENS enable and calibration support for V2
dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
thermal/drivers/qoriq: Power down TMU on system suspend
thermal/drivers/qoriq: Use dev_err_probe() simplify the code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"The silvaco driver gets support for the integration of the IP in the
Nuvoton npcm845 SoC. There is also a fix for a possible NULL pointer
dereference that can happen with early IBIs. Summary:
Core:
- Fix a possible NULL pointer dereference due to IBI coming when the
target driver is not yet probed.
Drivers:
- mipi-i3c-hci: Use I2C DMA-safe api
- svc: add Nuvoton npcm845 support"
* tag 'i3c/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Add NULL pointer check in i3c_master_queue_ibi()
i3c: master: Drop duplicate check before calling OF APIs
i3c: master: svc: Fix implicit fallthrough in svc_i3c_master_ibi_work()
i3c: master: svc: Fix missing STOP for master request
i3c: master: svc: Use readsb helper for reading MDB
i3c: master: svc: Fix missing the IBI rules
i3c: master: svc: Fix i3c_master_get_free_addr return check
i3c: master: svc: Fix npcm845 DAA process corruption
i3c: master: svc: Fix npcm845 invalid slvstart event
i3c: master: svc: Fix npcm845 FIFO empty issue
i3c: master: svc: Add support for Nuvoton npcm845 i3c
dt-bindings: i3c: silvaco: Add npcm845 compatible string
dt-bindings: i3c: dw: Add power-domains
i3c: master: svc: Flush FIFO before sending Dynamic Address Assignment(DAA)
i3c: mipi-i3c-hci: Use I2C DMA-safe api
i3c: Remove the const qualifier from i2c_msg pointer in i2c_xfers API
MAINTAINERS: Add Frank Li to Silvaco I3C
MAINTAINERS: Remove Conor Culhane from Silvaco I3C
|
|
bcachefs calls sort() during recovery to sort all keys it found in the
journal, and this may be very large - gigabytes on large machines.
This has been causing "task blocked" warnings, so needs a
cond_resched().
[kent.overstreet@linux.dev: fix kerneldoc]
Link: https://lkml.kernel.org/r/cgsr5a447pxqomc4gvznsp5yroqmif4omd7o5lsr2swifjhoic@yzjjrx2bvrq7
Link: https://lkml.kernel.org/r/20250326152606.2594920-1-kent.overstreet@linux.dev
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mseal system mappings", v9.
As discussed during mseal() upstream process [1], mseal() protects the
VMAs of a given virtual memory range against modifications, such as the
read/write (RW) and no-execute (NX) bits. For complete descriptions of
memory sealing, please see mseal.rst [2].
The mseal() is useful to mitigate memory corruption issues where a
corrupted pointer is passed to a memory management system. For example,
such an attacker primitive can break control-flow integrity guarantees
since read-only memory that is supposed to be trusted can become writable
or .text pages can get remapped.
The system mappings are readonly only, memory sealing can protect them
from ever changing to writable or unmmap/remapped as different attributes.
System mappings such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode), are created by the kernel during
program initialization, and could be sealed after creation.
Unlike the aforementioned mappings, the uprobe mapping is not established
during program startup. However, its lifetime is the same as the
process's lifetime [3]. It could be sealed from creation.
The vsyscall on x86-64 uses a special address (0xffffffffff600000), which
is outside the mm managed range. This means mprotect, munmap, and mremap
won't work on the vsyscall. Since sealing doesn't enhance the vsyscall's
security, it is skipped in this patch. If we ever seal the vsyscall, it
is probably only for decorative purpose, i.e. showing the 'sl' flag in
the /proc/pid/smaps. For this patch, it is ignored.
It is important to note that the CHECKPOINT_RESTORE feature (CRIU) may
alter the system mappings during restore operations. UML(User Mode Linux)
and gVisor, rr are also known to change the vdso/vvar mappings.
Consequently, this feature cannot be universally enabled across all
systems. As such, CONFIG_MSEAL_SYSTEM_MAPPINGS is disabled by default.
To support mseal of system mappings, architectures must define
CONFIG_ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS and update their special
mappings calls to pass mseal flag. Additionally, architectures must
confirm they do not unmap/remap system mappings during the process
lifetime. The existence of this flag for an architecture implies that it
does not require the remapping of thest system mappings during process
lifetime, so sealing these mappings is safe from a kernel perspective.
This version covers x86-64 and arm64 archiecture as minimum viable feature.
While no specific CPU hardware features are required for enable this
feature on an archiecture, memory sealing requires a 64-bit kernel. Other
architectures can choose whether or not to adopt this feature. Currently,
I'm not aware of any instances in the kernel code that actively
munmap/mremap a system mapping without a request from userspace. The PPC
does call munmap when _install_special_mapping fails for vdso; however,
it's uncertain if this will ever fail for PPC - this needs to be
investigated by PPC in the future [4]. The UML kernel can add this
support when KUnit tests require it [5].
In this version, we've improved the handling of system mapping sealing
from previous versions, instead of modifying the _install_special_mapping
function itself, which would affect all architectures, we now call
_install_special_mapping with a sealing flag only within the specific
architecture that requires it. This targeted approach offers two key
advantages: 1) It limits the code change's impact to the necessary
architectures, and 2) It aligns with the software architecture by keeping
the core memory management within the mm layer, while delegating the
decision of sealing system mappings to the individual architecture, which
is particularly relevant since 32-bit architectures never require sealing.
Prior to this patch series, we explored sealing special mappings from
userspace using glibc's dynamic linker. This approach revealed several
issues:
- The PT_LOAD header may report an incorrect length for vdso, (smaller
than its actual size). The dynamic linker, which relies on PT_LOAD
information to determine mapping size, would then split and partially
seal the vdso mapping. Since each architecture has its own vdso/vvar
code, fixing this in the kernel would require going through each
archiecture. Our initial goal was to enable sealing readonly mappings,
e.g. .text, across all architectures, sealing vdso from kernel since
creation appears to be simpler than sealing vdso at glibc.
- The [vvar] mapping header only contains address information, not
length information. Similar issues might exist for other special
mappings.
- Mappings like uprobe are not covered by the dynamic linker, and there
is no effective solution for them.
This feature's security enhancements will benefit ChromeOS, Android, and
other high security systems.
Testing:
This feature was tested on ChromeOS and Android for both x86-64 and ARM64.
- Enable sealing and verify vdso/vvar, sigpage, vector are sealed properly,
i.e. "sl" shown in the smaps for those mappings, and mremap is blocked.
- Passing various automation tests (e.g. pre-checkin) on ChromeOS and
Android to ensure the sealing doesn't affect the functionality of
Chromebook and Android phone.
I also tested the feature on Ubuntu on x86-64:
- With config disabled, vdso/vvar is not sealed,
- with config enabled, vdso/vvar is sealed, and booting up Ubuntu is OK,
normal operations such as browsing the web, open/edit doc are OK.
Link: https://lore.kernel.org/all/20240415163527.626541-1-jeffxu@chromium.org/ [1]
Link: Documentation/userspace-api/mseal.rst [2]
Link: https://lore.kernel.org/all/CABi2SkU9BRUnqf70-nksuMCQ+yyiWjo3fM4XkRkL-NrCZxYAyg@mail.gmail.com/ [3]
Link: https://lore.kernel.org/all/CABi2SkV6JJwJeviDLsq9N4ONvQ=EFANsiWkgiEOjyT9TQSt+HA@mail.gmail.com/ [4]
Link: https://lore.kernel.org/all/202502251035.239B85A93@keescook/ [5]
This patch (of 7):
Provide infrastructure to mseal system mappings. Establish two kernel
configs (CONFIG_MSEAL_SYSTEM_MAPPINGS,
ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS) and VM_SEALED_SYSMAP macro for future
patches.
Link: https://lkml.kernel.org/r/20250305021711.3867874-1-jeffxu@google.com
Link: https://lkml.kernel.org/r/20250305021711.3867874-2-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Elliot Hughes <enh@google.com>
Cc: Florian Faineli <f.fainelli@gmail.com>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport <mike.rapoport@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The tlb_remove_ptdesc()/tlb_remove_table() is specially designed for page
table pages, and now all architectures have been converted to use it to
remove page table pages. So let's remove tlb_remove_page_ptdesc(), it
currently has no users and should not be used for page table pages.
Link: https://lkml.kernel.org/r/3df04c8494339073b71be4acb2d92e108ecd1b60.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers of tlb_remove_ptdesc() pass it a pointer of struct ptdesc, so
let's change the pt parameter from void * to struct ptdesc * to perform a
type safety check.
Link: https://lkml.kernel.org/r/60bb44299cf2d731df6592e446e7f694054d0dbe.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "remove tlb_remove_page_ptdesc()", v2.
As suggested by Peter Zijlstra below [1], this series aims to remove
tlb_remove_page_ptdesc().
: Fundamentally tlb_remove_page() is about removing *pages* as from a PTE,
: there should not be a page-table anywhere near here *ever*.
:
: Yes, some architectures use tlb_remove_page() for page-tables too, but
: that is more or less an implementation detail that can be fixed.
After this series, all architectures use tlb_remove_table() or
tlb_remove_ptdesc() to remove the page table pages. In the future, once
all architectures using tlb_remove_table() have also converted to using
struct ptdesc (eg. powerpc), it may be possible to use only
tlb_remove_ptdesc().
[1] https://lore.kernel.org/linux-mm/20250103111457.GC22934@noisy.programming.kicks-ass.net/
This patch (of 6):
Now only arm will call tlb_remove_ptdesc()/tlb_remove_table() when
CONFIG_MMU_GATHER_TABLE_FREE is disabled. In this case, the type of the
table parameter is actually struct ptdesc * instead of struct page *.
Since struct ptdesc still overlaps with struct page and has not been
separated from it, forcing the table parameter to struct page * will not
cause any problems at this time. But this is definitely incorrect and
needs to be fixed. So just like the generic __tlb_remove_table(), let
generic tlb_remove_table() use struct ptdesc by default when
CONFIG_MMU_GATHER_TABLE_FREE is disabled.
Link: https://lkml.kernel.org/r/cover.1740454179.git.zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/5be8c3ab7bd68510bf0db4cf84010f4dfe372917.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Using x86_64 as an example, for a 32KB struct page[] area describing a 2MB
hugeTLB, HVO reduces the area to 4KB by the following steps:
1. Split the (r/w vmemmap) PMD mapping the area into 512 (r/w) PTEs;
2. For the 8 PTEs mapping the area, remap PTE 1-7 to the page mapped
by PTE 0, and at the same time change the permission from r/w to
r/o;
3. Free the pages PTE 1-7 used to map, hence the reduction from 32KB
to 4KB.
However, the following race can happen due to improperly memory loads
ordering:
CPU 1 (HVO) CPU 2 (speculative PFN walker)
page_ref_freeze()
synchronize_rcu()
rcu_read_lock()
page_is_fake_head() is false
vmemmap_remap_pte()
XXX: struct page[] becomes r/o
page_ref_unfreeze()
page_ref_count() is not zero
atomic_add_unless(&page->_refcount)
XXX: try to modify r/o struct page[]
Specifically, page_is_fake_head() must be ordered after page_ref_count()
on CPU 2 so that it can only return true for this case, to avoid the later
attempt to modify r/o struct page[].
This patch adds the missing memory barrier and makes the tests on
page_is_fake_head() and page_ref_count() done in the proper order.
Link: https://lkml.kernel.org/r/20250108074822.722696-1-yuzhao@google.com
Fixes: bd225530a4c7 ("mm/hugetlb_vmemmap: fix race with speculative PFN walkers")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/20241128142028.GA3506@willie-the-truck/
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"The dmaengine subsystem updates for this cycle consist of a new driver
(Microchip) along with couple of yaml binding conversions, core api
updates and bunch of driver updates etc.
New HW support:
- Microchip sama7d65 dma controller
- Yaml conversion of atmel dma binding and Freescale Elo DMA
Controller binding
Core:
- Remove device_prep_dma_imm_data() API as users are removed
- Reduce scope of some less frequently used DMA request channel APIs
with aim to cleanup these in future
Updates:
- Drop Fenghua Yu from idxd maintainers, as he changed jobs
- AMD ptdma support for multiqueue and ae4dma deprecated PCI IDs
removal"
* tag 'dmaengine-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (29 commits)
dmaengine: ptdma: Utilize the AE4DMA engine's multi-queue functionality
dmaengine: ae4dma: Use the MSI count and its corresponding IRQ number
dmaengine: ae4dma: Remove deprecated PCI IDs
dmaengine: Remove device_prep_dma_imm_data from struct dma_device
dmaengine: ti: edma: support sw triggered chans in of_edma_xlate()
dmaengine: ti: k3-udma: Enable second resource range for BCDMA and PKTDMA
dmaengine: fsl-edma: free irq correctly in remove path
dmaengine: fsl-edma: cleanup chan after dma_async_device_unregister
dt-bindings: dma: snps,dw-axi-dmac: Allow devices to be marked as noncoherent
dmaengine: dmatest: Fix dmatest waiting less when interrupted
dt-bindings: dma: Convert fsl,elo*-dma to YAML
dt-bindings: dma: fsl-mxs-dma: Add compatible string for i.MX8 chips
dmaengine: Fix typo in comment
dmaengine: ti: k3-udma-glue: Drop skip_fdq argument from k3_udma_glue_reset_rx_chn
dmaengine: bcm2835-dma: fix warning when CONFIG_PM=n
dt-bindings: dma: fsl,edma: Add i.MX94 support
dt-bindings: dma: atmel: add microchip,sama7d65-dma
dmaengine: img-mdc: remove incorrect of_match_ptr annotation
dmaengine: idxd: Delete unnecessary NULL check
dmaengine: pxa: Enable compile test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"A fairly moderate sized request for the generic phy subsystem with
some new device and driver support along with driver updates with
Samsung and Qualcomm ones being major ones.
New HW Support:
- Qualcomm X1P42100 PCIe Gen4x4, QCS615 qmp usbc, PCIe UNIPHY 28LP
driver, SM8750 QMP UFS PHY
- Rockchip rk3576 hdptx, rk3562 naneng-combo support
- Samsung MIPI D-/C-PHY driver, ExynosAutov920 ufs phy driver
Updates:
- Samsung USB3 Type-C lane orientation detection and configuration
for Google gs101
- Qualcomm support for dual lane PHY support for QCS8300 SoC"
* tag 'phy-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (47 commits)
phy: rockchip-naneng-combo: Support rk3562
dt-bindings: phy: rockchip: Add rk3562 naneng-combophy compatible
phy: rockchip: Add Samsung MIPI D-/C-PHY driver
dt-bindings: phy: Add Rockchip MIPI C-/D-PHY schema
phy: qcom: uniphy-28lp: add COMMON_CLK dependency
phy: rockchip: usbdp: Remove unnecessary bool conversion
phy: rockchip: usbdp: Avoid call hpd_event_trigger in dp_phy_init
phy: rockchip: usbdp: Only verify link rates/lanes/voltage when the corresponding set flags are set
phy: qcom-qmp-pcie: add dual lane PHY support for QCS8300
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP PCIe PHY Gen4 x2
phy: qcom-qmp-ufs: Add PHY Configuration support for sm8750
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the SM8750 QMP UFS PHY
phy: qcom: Introduce PCIe UNIPHY 28LP driver
dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
phy: qcom: qmp-usbc: Add qmp configuration for QCS615
phy: freescale: imx8m-pcie: assert phy reset and perst in power off
phy: freescale: imx8m-pcie: cleanup reset logic
phy: core: Remove unused phy_pm_runtime_(allow|forbid)
dt-bindings: phy: document Allwinner A523 USB-2.0 PHY
phy: phy-rockchip-samsung-hdptx: Add support for RK3576
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for SoundWire Bulk Register Access (BRA) protocol in core
along with Intel driver support and ASoC bits required
- AMD driver updates and support for ACP 7.0 and 7.1 platforms
* tag 'soundwire-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (28 commits)
soundwire: take in count the bandwidth of a prepared stream
ASoC: rt711-sdca: add DP0 support
soundwire: debugfs: add interface for BPT/BRA transfers
ASoC: SOF: Intel: hda-sdw-bpt: add CHAIN_DMA support
soundwire: intel_ace2x: add BPT send_async/wait callbacks
soundwire: intel: add BPT context definition
ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA
soundwire: intel_auxdevice: add indirection for BPT send_async/wait
soundwire: cadence: add BTP/BRA helpers to format data
soundwire: bus: add bpt_stream pointer
soundwire: bus: add send_async/wait APIs for BPT protocol
soundwire: stream: reuse existing code for BPT stream
soundwire: stream: special-case the bus compute_params() routine
soundwire: stream: extend sdw_alloc_stream() to take 'type' parameter
soundwire: extend sdw_stream_type to BPT
soundwire: cadence: add BTP support for DP0
Documentation: driver: add SoundWire BRA description
soundwire: amd: change the log level for command response log
soundwire: slave: fix an OF node reference leak in soundwire slave device
soundwire: Use str_enable_disable-like helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
RTC_NUM_YEARS has never been used, the other defines are not used since
commit 34bbdc12d04e ("rtc: mt6359: Add RTC hardware range and add support
for start-year")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250303223637.1135362-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Thanks to CONFIG_DEBUG_SECTION_MISMATCH, empty functions can be
generated out of line. rcu_irq_work_resched() can be called from
noinstr code, so make sure it's always inlined.
Fixes: 564506495ca9 ("rcu/context-tracking: Move deferred nocb resched to context tracking")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/e84f15f013c07e4c410d972e75620c53b62c1b3e.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/d1eca076-fdde-484a-b33e-70e0d167c36d@infradead.org
|
|
Thanks to CONFIG_DEBUG_SECTION_MISMATCH, empty functions can be
generated out of line. These can be called from noinstr code, so make
sure they're always inlined.
Fixes the following warnings:
vmlinux.o: warning: objtool: irqentry_nmi_enter+0xa2: call to ct_nmi_enter() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_nmi_exit+0x16: call to ct_nmi_exit() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_exit+0x78: call to ct_irq_exit() leaves .noinstr.text section
Fixes: 6f0e6c1598b1 ("context_tracking: Take IRQ eqs entrypoints over RCU")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/8509bce3f536bcd4ae7af3a2cf6930d48c5e631a.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/d1eca076-fdde-484a-b33e-70e0d167c36d@infradead.org
|
|
sched_smt_active() can be called from noinstr code, so it should always
be inlined. The CONFIG_SCHED_SMT version already has __always_inline.
Do the same for its !CONFIG_SCHED_SMT counterpart.
Fixes the following warning:
vmlinux.o: error: objtool: intel_idle_ibrs+0x13: call to sched_smt_active() leaves .noinstr.text section
Fixes: 321a874a7ef8 ("sched/smt: Expose sched_smt_present static key")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/1d03907b0a247cf7fb5c1d518de378864f603060.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503311434.lyw2Tveh-lkp@intel.com/
|
|
Pull nfsd updates from Chuck Lever:
"Neil Brown contributed more scalability improvements to NFSD's open
file cache, and Jeff Layton contributed a menagerie of repairs to
NFSD's NFSv4 callback / backchannel implementation.
Mike Snitzer contributed a change to NFS re-export support that
disables support for file locking on a re-exported NFSv4 mount. This
is because NFSv4 state recovery is currently difficult if not
impossible for re-exported NFS mounts. The change aims to prevent data
integrity exposures after the re-export server crashes.
Work continues on the evolving NFSD netlink administrative API.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.15 development cycle"
* tag 'nfsd-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits)
NFSD: Add a Kconfig setting to enable delegated timestamps
sysctl: Fixes nsm_local_state bounds
nfsd: use a long for the count in nfsd4_state_shrinker_count()
nfsd: remove obsolete comment from nfs4_alloc_stid
nfsd: remove unneeded forward declaration of nfsd4_mark_cb_fault()
nfsd: reorganize struct nfs4_delegation for better packing
nfsd: handle errors from rpc_call_async()
nfsd: move cb_need_restart flag into cb_flags
nfsd: replace CB_GETATTR_BUSY with NFSD4_CALLBACK_RUNNING
nfsd: eliminate cl_ra_cblist and NFSD4_CLIENT_CB_RECALL_ANY
nfsd: prevent callback tasks running concurrently
nfsd: disallow file locking and delegations for NFSv4 reexport
nfsd: filecache: drop the list_lru lock during lock gc scans
nfsd: filecache: don't repeatedly add/remove files on the lru list
nfsd: filecache: introduce NFSD_FILE_RECENT
nfsd: filecache: use list_lru_walk_node() in nfsd_file_gc()
nfsd: filecache: use nfsd_file_dispose_list() in nfsd_file_close_inode_sync()
NFSD: Re-organize nfsd_file_gc_worker()
nfsd: filecache: remove race handling.
fs: nfs: acl: Avoid -Wflex-array-member-not-at-end warning
...
|
|
This reverts commit 0de2a5c4b824da2205658ebebb99a55c43cdf60f.
I forgot that a TCP socket could receive messages in its error queue.
sock_queue_err_skb() can be called without socket lock being held,
and changes sk->sk_rmem_alloc.
The fact that skbs in error queue are limited by sk->sk_rcvbuf
means that error messages can be dropped if socket receive
queues are full, which is an orthogonal issue.
In future kernels, we could use a separate sk->sk_error_mem_alloc
counter specifically for the error queue.
Fixes: 0de2a5c4b824 ("tcp: avoid atomic operations on sk->sk_rmem_alloc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250331075946.31960-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Restructure the persistent memory to have a "scratch" area
Instead of hard coding the KASLR offset in the persistent memory by
the ring buffer, push that work up to the callers of the persistent
memory as they are the ones that need this information. The offsets
and such is not important to the ring buffer logic and it should not
be part of that.
A scratch pad is now created when the caller allocates a ring buffer
from persistent memory by stating how much memory it needs to save.
- Allow where modules are loaded to be saved in the new scratch pad
Save the addresses of modules when they are loaded into the
persistent memory scratch pad.
- A new module_for_each_mod() helper function was created
With the acknowledgement of the module maintainers a new module
helper function was created to iterate over all the currently loaded
modules. This has a callback to be called for each module. This is
needed for when tracing is started in the persistent buffer and the
currently loaded modules need to be saved in the scratch area.
- Expose the last boot information where the kernel and modules were
loaded
The last_boot_info file is updated to print out the addresses of
where the kernel "_text" location was loaded from a previous boot, as
well as where the modules are loaded. If the buffer is recording the
current boot, it only prints "# Current" so that it does not expose
the KASLR offset of the currently running kernel.
- Allow the persistent ring buffer to be released (freed)
To have this in production environments, where the kernel command
line can not be changed easily, the ring buffer needs to be freed
when it is not going to be used. The memory for the buffer will
always be allocated at boot up, but if the system isn't going to
enable tracing, the memory needs to be freed. Allow it to be freed
and added back to the kernel memory pool.
- Allow stack traces to print the function names in the persistent
buffer
Now that the modules are saved in the persistent ring buffer, if the
same modules are loaded, the printing of the function names will
examine the saved modules. If the module is found in the scratch area
and is also loaded, then it will do the offset shift and use kallsyms
to display the function name. If the address is not found, it simply
displays the address from the previous boot in hex.
* tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use _text and the kernel offset in last_boot_info
tracing: Show last module text symbols in the stacktrace
ring-buffer: Remove the unused variable bmeta
tracing: Skip update_last_data() if cleared and remove active check for save_mod()
tracing: Initialize scratch_size to zero to prevent UB
tracing: Fix a compilation error without CONFIG_MODULES
tracing: Freeable reserved ring buffer
mm/memblock: Add reserved memory release function
tracing: Update modules to persistent instances when loaded
tracing: Show module names and addresses of last boot
tracing: Have persistent trace instances save module addresses
module: Add module_for_each_mod() function
tracing: Have persistent trace instances save KASLR offset
ring-buffer: Add ring_buffer_meta_scratch()
ring-buffer: Add buffer meta data for persistent ring buffer
ring-buffer: Use kaslr address instead of text delta
ring-buffer: Fix bytes_dropped calculation issue
|
|
There is now an io_uring private part of cmd async_data, move saved sqe
into it. Drivers are accessing it via struct io_uring_cmd::cmd.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ecbe078dd57acefdbc4366d083327086c0879378.1743357121.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are situations where fuse servers can become unresponsive or
stuck, for example if the server is deadlocked. Currently, there's no
good way to detect if a server is stuck and needs to be killed manually.
This commit adds an option for enforcing a timeout (in seconds) for
requests where if the timeout elapses without the server responding to
the request, the connection will be automatically aborted.
Please note that these timeouts are not 100% precise. For example, the
request may take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond
the requested timeout due to internal implementation, in order to
mitigate overhead.
[SzM: Bump the API version number]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Extract the 'pin-init' API from the 'kernel' crate and make it into
a standalone crate.
In order to do this, the contents are rearranged so that they can
easily be kept in sync with the version maintained out-of-tree that
other projects have started to use too (or plan to, like QEMU).
This will reduce the maintenance burden for Benno, who will now
have his own sub-tree, and will simplify future expected changes
like the move to use 'syn' to simplify the implementation.
- Add '#[test]'-like support based on KUnit.
We already had doctests support based on KUnit, which takes the
examples in our Rust documentation and runs them under KUnit.
Now, we are adding the beginning of the support for "normal" tests,
similar to those the '#[test]' tests in userspace Rust. For
instance:
#[kunit_tests(my_suite)]
mod tests {
#[test]
fn my_test() {
assert_eq!(1 + 1, 2);
}
}
Unlike with doctests, the 'assert*!'s do not map to the KUnit
assertion APIs yet.
- Check Rust signatures at compile time for functions called from C
by name.
In particular, introduce a new '#[export]' macro that can be placed
in the Rust function definition. It will ensure that the function
declaration on the C side matches the signature on the Rust
function:
#[export]
pub unsafe extern "C" fn my_function(a: u8, b: i32) -> usize {
// ...
}
The macro essentially forces the compiler to compare the types of
the actual Rust function and the 'bindgen'-processed C signature.
These cases are rare so far. In the future, we may consider
introducing another tool, 'cbindgen', to generate C headers
automatically. Even then, having these functions explicitly marked
may be a good idea anyway.
- Enable the 'raw_ref_op' Rust feature: it is already stable, and
allows us to use the new '&raw' syntax, avoiding a couple macros.
After everyone has migrated, we will disallow the macros.
- Pass the correct target to 'bindgen' on Usermode Linux.
- Fix 'rusttest' build in macOS.
'kernel' crate:
- New 'hrtimer' module: add support for setting up intrusive timers
without allocating when starting the timer. Add support for
'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and 'Pin<&mut _>' as pointer
types for use with timer callbacks. Add support for setting clock
source and timer mode.
- New 'dma' module: add a simple DMA coherent allocator abstraction
and a test sample driver.
- 'list' module: make the linked list 'Cursor' point between
elements, rather than at an element, which is more convenient to us
and allows for cursors to empty lists; and document it with
examples of how to perform common operations with the provided
methods.
- 'str' module: implement a few traits for 'BStr' as well as the
'strip_prefix()' method.
- 'sync' module: add 'Arc::as_ptr'.
- 'alloc' module: add 'Box::into_pin'.
- 'error' module: extend the 'Result' documentation, including a few
examples on different ways of handling errors, a warning about
using methods that may panic, and links to external documentation.
'macros' crate:
- 'module' macro: add the 'authors' key to support multiple authors.
The original key will be kept until everyone has migrated.
Documentation:
- Add error handling sections.
MAINTAINERS:
- Add Danilo Krummrich as reviewer of the Rust "subsystem".
- Add 'RUST [PIN-INIT]' entry with Benno Lossin as maintainer. It has
its own sub-tree.
- Add sub-tree for 'RUST [ALLOC]'.
- Add 'DMA MAPPING HELPERS DEVICE DRIVER API [RUST]' entry with
Abdiel Janulgue as primary maintainer. It will go through the
sub-tree of the 'RUST [ALLOC]' entry.
- Add 'HIGH-RESOLUTION TIMERS [RUST]' entry with Andreas Hindborg as
maintainer. It has its own sub-tree.
And a few other cleanups and improvements"
* tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (71 commits)
rust: dma: add `Send` implementation for `CoherentAllocation`
rust: macros: fix `make rusttest` build on macOS
rust: block: refactor to use `&raw mut`
rust: enable `raw_ref_op` feature
rust: uaccess: name the correct function
rust: rbtree: fix comments referring to Box instead of KBox
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: str: implement `strip_prefix` for `BStr`
rust: str: implement `AsRef<BStr>` for `[u8]` and `BStr`
rust: str: implement `Index` for `BStr`
rust: str: implement `PartialEq` for `BStr`
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Petr Pavlu:
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and
preempt_disable() in the module code and its users has
been replaced with just rcu_read_lock()
- The rest of changes are smaller fixes and updates
* tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (32 commits)
MAINTAINERS: Update the MODULE SUPPORT section
module: Remove unnecessary size argument when calling strscpy()
module: Replace deprecated strncpy() with strscpy()
params: Annotate struct module_param_attrs with __counted_by()
bug: Use RCU instead RCU-sched to protect module_bug_list.
static_call: Use RCU in all users of __module_text_address().
kprobes: Use RCU in all users of __module_text_address().
bpf: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_address().
x86: Use RCU in all users of __module_address().
cfi: Use RCU while invoking __module_address().
powerpc/ftrace: Use RCU in all users of __module_text_address().
LoongArch: ftrace: Use RCU in all users of __module_text_address().
LoongArch/orc: Use RCU in all users of __module_address().
arm64: module: Use RCU in all users of __module_text_address().
ARM: module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_address().
module: Use RCU in search_module_extables().
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes and updates from Ingo Molnar:
- Fix a large number of x86 Kconfig dependency and help text accuracy
bugs/problems, by Mateusz Jończyk and David Heideberg
- Fix a VM_PAT interaction with fork() crash. This also touches core
kernel code
- Fix an ORC unwinder bug for interrupt entries
- Fixes and cleanups
- Fix an AMD microcode loader bug that can promote verification
failures into success
- Add early-printk support for MMIO based UARTs on an x86 board that
had no other serial debugging facility and also experienced early
boot crashes
* tag 'x86-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Fix __apply_microcode_amd()'s return value
x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()
x86/fpu: Update the outdated comment above fpstate_init_user()
x86/early_printk: Add support for MMIO-based UARTs
x86/dumpstack: Fix inaccurate unwinding from exception stacks due to misplaced assignment
x86/entry: Fix ORC unwinder for PUSH_REGS with save_ret=1
x86/Kconfig: Fix lists in X86_EXTENDED_PLATFORM help text
x86/Kconfig: Correct X86_X2APIC help text
x86/speculation: Remove the extra #ifdef around CALL_NOSPEC
x86/Kconfig: Document release year of glibc 2.3.3
x86/Kconfig: Make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32
x86/Kconfig: Document CONFIG_PCI_MMCONFIG
x86/Kconfig: Update lists in X86_EXTENDED_PLATFORM
x86/Kconfig: Move all X86_EXTENDED_PLATFORM options together
x86/Kconfig: Always enable ARCH_SPARSEMEM_ENABLE
x86/Kconfig: Enable X86_X2APIC by default and improve help text
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf try_alloc_pages() support from Alexei Starovoitov:
"The pull includes work from Sebastian, Vlastimil and myself with a lot
of help from Michal and Shakeel.
This is a first step towards making kmalloc reentrant to get rid of
slab wrappers: bpf_mem_alloc, kretprobe's objpool, etc. These patches
make page allocator safe from any context.
Vlastimil kicked off this effort at LSFMM 2024:
https://lwn.net/Articles/974138/
and we continued at LSFMM 2025:
https://lore.kernel.org/all/CAADnVQKfkGxudNUkcPJgwe3nTZ=xohnRshx9kLZBTmR_E1DFEg@mail.gmail.com/
Why:
SLAB wrappers bind memory to a particular subsystem making it
unavailable to the rest of the kernel. Some BPF maps in production
consume Gbytes of preallocated memory. Top 5 in Meta: 1.5G, 1.2G,
1.1G, 300M, 200M. Once we have kmalloc that works in any context BPF
map preallocation won't be necessary.
How:
Synchronous kmalloc/page alloc stack has multiple stages going from
fast to slow: cmpxchg16 -> slab_alloc -> new_slab -> alloc_pages ->
rmqueue_pcplist -> __rmqueue, where rmqueue_pcplist was already
relying on trylock.
This set changes rmqueue_bulk/rmqueue_buddy to attempt a trylock and
return ENOMEM if alloc_flags & ALLOC_TRYLOCK. It then wraps this
functionality into try_alloc_pages() helper. We make sure that the
logic is sane in PREEMPT_RT.
End result: try_alloc_pages()/free_pages_nolock() are safe to call
from any context.
try_kmalloc() for any context with similar trylock approach will
follow. It will use try_alloc_pages() when slab needs a new page.
Though such try_kmalloc/page_alloc() is an opportunistic allocator,
this design ensures that the probability of successful allocation of
small objects (up to one page in size) is high.
Even before we have try_kmalloc(), we already use try_alloc_pages() in
BPF arena implementation and it's going to be used more extensively in
BPF"
* tag 'bpf_try_alloc_pages' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
mm: Fix the flipped condition in gfpflags_allow_spinning()
bpf: Use try_alloc_pages() to allocate pages for bpf needs.
mm, bpf: Use memcg in try_alloc_pages().
memcg: Use trylock to access memcg stock_lock.
mm, bpf: Introduce free_pages_nolock()
mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation
locking/local_lock: Introduce localtry_lock_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf relisient spinlock support from Alexei Starovoitov:
"This patch set introduces Resilient Queued Spin Lock (or rqspinlock
with res_spin_lock() and res_spin_unlock() APIs).
This is a qspinlock variant which recovers the kernel from a stalled
state when the lock acquisition path cannot make forward progress.
This can occur when a lock acquisition attempt enters a deadlock
situation (e.g. AA, or ABBA), or more generally, when the owner of the
lock (which we’re trying to acquire) isn’t making forward progress.
Deadlock detection is the main mechanism used to provide instant
recovery, with the timeout mechanism acting as a final line of
defense. Detection is triggered immediately when beginning the waiting
loop of a lock slow path.
Additionally, BPF programs attached to different parts of the kernel
can introduce new control flow into the kernel, which increases the
likelihood of deadlocks in code not written to handle reentrancy.
There have been multiple syzbot reports surfacing deadlocks in
internal kernel code due to the diverse ways in which BPF programs can
be attached to different parts of the kernel. By switching the BPF
subsystem’s lock usage to rqspinlock, all of these issues are
mitigated at runtime.
This spin lock implementation allows BPF maps to become safer and
remove mechanisms that have fallen short in assuring safety when
nesting programs in arbitrary ways in the same context or across
different contexts.
We run benchmarks that stress locking scalability and perform
comparison against the baseline (qspinlock). For the rqspinlock case,
we replace the default qspinlock with it in the kernel, such that all
spin locks in the kernel use the rqspinlock slow path. As such,
benchmarks that stress kernel spin locks end up exercising rqspinlock.
More details in the cover letter in commit 6ffb9017e932 ("Merge branch
'resilient-queued-spin-lock'")"
* tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (24 commits)
selftests/bpf: Add tests for rqspinlock
bpf: Maintain FIFO property for rqspinlock unlock
bpf: Implement verifier support for rqspinlock
bpf: Introduce rqspinlock kfuncs
bpf: Convert lpm_trie.c to rqspinlock
bpf: Convert percpu_freelist.c to rqspinlock
bpf: Convert hashtab.c to rqspinlock
rqspinlock: Add locktorture support
rqspinlock: Add entry to Makefile, MAINTAINERS
rqspinlock: Add macros for rqspinlock usage
rqspinlock: Add basic support for CONFIG_PARAVIRT
rqspinlock: Add a test-and-set fallback
rqspinlock: Add deadlock detection and recovery
rqspinlock: Protect waiters in trylock fallback from stalls
rqspinlock: Protect waiters in queue from stalls
rqspinlock: Protect pending bit owners from stalls
rqspinlock: Hardcode cond_acquire loops for arm64
rqspinlock: Add support for timeouts
rqspinlock: Drop PV and virtualization support
rqspinlock: Add rqspinlock.h header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Core:
- misc rejig of header includes
- minor const fixes
Misc:
- constify amba_id table
pcc:
- cleanup and refactoring of shmem and irq handling
qcom:
- add MSM8226 compatible
fsl,mu:
- add i.MX94 compatible
mediatek:
- remove cl in struct cmdq_pkt
tegra:
- define dimensioning masks in SoC data"
* tag 'mailbox-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (25 commits)
mailbox: Remove unneeded semicolon
mailbox: pcc: Refactor and simplify check_and_ack()
mailbox: pcc: Always map the shared memory communication address
mailbox: pcc: Refactor error handling in irq handler into separate function
mailbox: pcc: Use acpi_os_ioremap() instead of ioremap()
mailbox: pcc: Return early if no GAS register from pcc_mbox_cmd_complete_check
mailbox: pcc: Drop unnecessary endianness conversion of pcc_hdr.flags
mailbox: pcc: Always clear the platform ack interrupt first
mailbox: pcc: Fix the possible race in updation of chan_in_use flag
dt-bindings: mailbox: qcom: add compatible for MSM8226 SoC
dt-bindings: mailbox: fsl,mu: Add i.MX94 compatible
MAINTAINERS: add mailbox API's tree type and location
mailbox: remove unused header files
mailbox: explicitly include <linux/bits.h>
mailbox: sort headers alphabetically
mailbox: don't protect of_parse_phandle_with_args with con_mutex
mailbox: use error ret code of of_parse_phandle_with_args()
mailbox: arm_mhuv2: Constify amba_id table
mailbox: arm_mhu_db: Constify amba_id table
mailbox: arm_mhu: Constify amba_id table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- remove unused set_charged infrastructure
- drop of_node from power_supply struct
Power-supply drivers:
- axp717: support devices without thermistors
- bq27xxx: support max design voltage for bq270x0 and bq27x10
- pcf50633: drop charger driver
- max1720x: add battery health support
- switch all power-supply devices from of_node to fwnode
- convert regmap users to maple tree register cache
- convert drivers to devm_kmemdup_array
- misc cleanups and fixes
Reset drivers:
- at91-sama5d2_shdwc: add sama7d65 support
* tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: mt6370: Remove redundant 'flush_workqueue()' calls
Revert "power: supply: bq27xxx: do not report bogus zero values"
power: supply: max77693: Fix wrong conversion of charge input threshold value
power: supply: pcf50633: Remove charger
power: supply: all: switch psy_cfg from of_node to fwnode
power: supply: core: get rid of of_node
power: reset: at91-sama5d2_shdwc: Add sama7d65 PMC
power: supply: smb347: convert to use maple tree register cache
power: supply: rt9455: convert to use maple tree register cache
power: supply: max1720x: convert to use maple tree register cache
power: supply: ltc4162l: convert to use maple tree register cache
power: supply: bq25980: convert to use maple tree register cache
power: supply: bq25890: convert to use maple tree register cache
power: supply: bq2515x: convert to use maple tree register cache
power: supply: bq24257: convert to use maple tree register cache
power: supply: bd99954: convert to use maple tree register cache
power: supply: Remove unused set_charged method
power: supply: ds2760: Remove unused ds2760_battery_set_charged
power: supply: core: Remove unused power_supply_set_battery_charged
power: supply: sc27xx: use devm_kmemdup_array()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Here's the pile of clk driver patches. The usual suspects^Wsilicon
vendors are all here, adding new SoC support and fixing existing code.
There are a few patches to the clk framework here as well. They've
been baking in linux-next for weeks so I'm hoping we don't have to
revert them. The disable OF node patch is probably the scariest one
although it seems unlikely that a system would be relying on a driver
_not_ probing because the clk never appeared, but you never know.
Nothing looks out of the ordinary on the driver side but that's
because it's mostly a bunch of data.
Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()
New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive,
MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver
Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
dt-bindings: reset: fix double id on rk3562-cru reset ids
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: davinci: remove support for da830
...
|
