| Age | Commit message (Collapse) | Author |
|---|
|
Now not only CPUs can use energy efficiency models, but GPUs
can also use. On the other hand, even with only one CPU, we can also
use energy_model to align control in thermal.
So remove the dependence of SMP, and add the DEVFREQ.
Signed-off-by: Jeson Gao <jeson.gao@unisoc.com>
[Added missing SMP config option in DTPM_CPU dependency]
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20250307132649.4056210-1-lukasz.luba@arm.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The usage of __rcu in the Energy Model code is quite inconsistent
which causes the following sparse warnings to trigger:
kernel/power/energy_model.c:169:15: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:169:15: expected struct em_perf_table [noderef] __rcu *table
kernel/power/energy_model.c:169:15: got struct em_perf_table *
kernel/power/energy_model.c:171:9: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:171:9: expected struct callback_head *head
kernel/power/energy_model.c:171:9: got struct callback_head [noderef] __rcu *
kernel/power/energy_model.c:171:9: warning: cast removes address space '__rcu' of expression
kernel/power/energy_model.c:182:19: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:182:19: expected struct kref *kref
kernel/power/energy_model.c:182:19: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:200:15: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:200:15: expected struct em_perf_table [noderef] __rcu *table
kernel/power/energy_model.c:200:15: got void *[assigned] _res
kernel/power/energy_model.c:204:20: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:204:20: expected struct kref *kref
kernel/power/energy_model.c:204:20: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:320:19: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:320:19: expected struct kref *kref
kernel/power/energy_model.c:320:19: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:325:45: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:325:45: expected struct em_perf_state *table
kernel/power/energy_model.c:325:45: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:425:45: warning: incorrect type in argument 3 (different address spaces)
kernel/power/energy_model.c:425:45: expected struct em_perf_state *table
kernel/power/energy_model.c:425:45: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:442:15: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:442:15: expected void const *objp
kernel/power/energy_model.c:442:15: got struct em_perf_table [noderef] __rcu *[assigned] em_table
kernel/power/energy_model.c:626:55: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:626:55: expected struct em_perf_state *table
kernel/power/energy_model.c:626:55: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:681:16: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:681:16: expected struct em_perf_state *new_ps
kernel/power/energy_model.c:681:16: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:699:37: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:699:37: expected struct em_perf_state *table
kernel/power/energy_model.c:699:37: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:733:38: warning: incorrect type in argument 3 (different address spaces)
kernel/power/energy_model.c:733:38: expected struct em_perf_state *table
kernel/power/energy_model.c:733:38: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:855:53: warning: dereference of noderef expression
kernel/power/energy_model.c:864:32: warning: dereference of noderef expression
This is because the __rcu annotation for sparse is only applicable to
pointers that need rcu_dereference() or equivalent for protection, which
basically means pointers assigned with rcu_assign_pointer().
Make all of the above sparse warnings go away by cleaning up the usage
of __rcu and using rcu_dereference_protected() where applicable.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/5885405.DvuYhMxLoT@rjwysocki.net
|
|
The rseq_cs field is documented as being set to 0 by user-space prior to
registration, however this is not currently enforced by the kernel. This
can result in a segfault on return to user-space if the value stored in
the rseq_cs field doesn't point to a valid struct rseq_cs.
The correct solution to this would be to fail the rseq registration when
the rseq_cs field is non-zero. However, some older versions of glibc
will reuse the rseq area of previous threads without clearing the
rseq_cs field and will also terminate the process if the rseq
registration fails in a secondary thread. This wasn't caught in testing
because in this case the leftover rseq_cs does point to a valid struct
rseq_cs.
What we can do is clear the rseq_cs field on registration when it's
non-zero which will prevent segfaults on registration and won't break
the glibc versions that reuse rseq areas on thread creation.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250306211223.109455-1-mjeanson@efficios.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e45a ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e77 ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cover the paths that come via bpf system call and XSK bind.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-10-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Notice that em_dev_register_perf_domain() and the functions called by it
do not update objects pointed to by its cb and cpus parameters, so the
const modifier can be added to them.
This allows the return value of cpumask_of() or a pointer to a
struct em_data_callback declared as const to be passed to
em_dev_register_perf_domain() directly without explicit type
casting which is rather handy.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/4648962.LvFx2qVVIh@rjwysocki.net
|
|
Requesting a fwctl scope of access that includes mutating device debug
data will cause the kernel to be tainted. Changing the device operation
through things in the debug scope may cause the device to malfunction in
undefined ways. This should be reflected in the TAINT flags to help any
debuggers understand that something has been done.
Link: https://patch.msgid.link/r/4-v5-642aa0c94070+4447f-fwctl_jgg@nvidia.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
2 seq_puts() calls can be merged.
It saves a few lines of code and a few cycles, should it matter.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/845caa94b74cea8d72c158bf1994fe250beee28c.1739979791.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Restricted pointers ("%pK") are not meant to be used through printk().
It can unintentionally expose security sensitive, raw pointer values.
Use regular pointer formatting instead.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250217-restricted-pointers-trace-v1-1-bbe9ea279848@linutronix.de
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix typo in comment about header page pointer in function
rb_get_reader_page.
Link: https://lore.kernel.org/20250118012352.3430519-1-zhouzhouyi@gmail.com
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix spelling mistakes in idmappings.rst
- Fix RCU warnings in override_creds()/revert_creds()
- Create new pid namespaces with default limit now that pid_max is
namespaced
* tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pid: Do not set pid_max in new pid namespaces
doc: correcting two prefix errors in idmappings.rst
cred: Fix RCU warnings in override/revert_creds
|
|
Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:
https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf
Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that.
Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250212220433.3624297-1-jolsa@kernel.org
|
|
When creating a new perf_event for the hardlockup watchdog, it should not
happen that the old perf_event is not released.
Introduce a WARN_ONCE() that should never trigger.
[ mingo: Changed the type of the warning to WARN_ONCE(). ]
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241021193004.308303-2-lihuafei1@huawei.com
|
|
During stress-testing, we found a kmemleak report for perf_event:
unreferenced object 0xff110001410a33e0 (size 1328):
comm "kworker/4:11", pid 288, jiffies 4294916004
hex dump (first 32 bytes):
b8 be c2 3b 02 00 11 ff 22 01 00 00 00 00 ad de ...;....".......
f0 33 0a 41 01 00 11 ff f0 33 0a 41 01 00 11 ff .3.A.....3.A....
backtrace (crc 24eb7b3a):
[<00000000e211b653>] kmem_cache_alloc_node_noprof+0x269/0x2e0
[<000000009d0985fa>] perf_event_alloc+0x5f/0xcf0
[<00000000084ad4a2>] perf_event_create_kernel_counter+0x38/0x1b0
[<00000000fde96401>] hardlockup_detector_event_create+0x50/0xe0
[<0000000051183158>] watchdog_hardlockup_enable+0x17/0x70
[<00000000ac89727f>] softlockup_start_fn+0x15/0x40
...
Our stress test includes CPU online and offline cycles, and updating the
watchdog configuration.
After reading the code, I found that there may be a race between cleaning up
perf_event after updating watchdog and disabling event when the CPU goes offline:
CPU0 CPU1 CPU2
(update watchdog) (hotplug offline CPU1)
... _cpu_down(CPU1)
cpus_read_lock() // waiting for cpu lock
softlockup_start_all
smp_call_on_cpu(CPU1)
softlockup_start_fn
...
watchdog_hardlockup_enable(CPU1)
perf create E1
watchdog_ev[CPU1] = E1
cpus_read_unlock()
cpus_write_lock()
cpuhp_kick_ap_work(CPU1)
cpuhp_thread_fun
...
watchdog_hardlockup_disable(CPU1)
watchdog_ev[CPU1] = NULL
dead_event[CPU1] = E1
__lockup_detector_cleanup
for each dead_events_mask
release each dead_event
/*
* CPU1 has not been added to
* dead_events_mask, then E1
* will not be released
*/
CPU1 -> dead_events_mask
cpumask_clear(&dead_events_mask)
// dead_events_mask is cleared, E1 is leaked
In this case, the leaked perf_event E1 matches the perf_event leak
reported by kmemleak. Due to the low probability of problem recurrence
(only reported once), I added some hack delays in the code:
static void __lockup_detector_reconfigure(void)
{
...
watchdog_hardlockup_start();
cpus_read_unlock();
+ mdelay(100);
/*
* Must be called outside the cpus locked section to prevent
* recursive locking in the perf code.
...
}
void watchdog_hardlockup_disable(unsigned int cpu)
{
...
perf_event_disable(event);
this_cpu_write(watchdog_ev, NULL);
this_cpu_write(dead_event, event);
+ mdelay(100);
cpumask_set_cpu(smp_processor_id(), &dead_events_mask);
atomic_dec(&watchdog_cpus);
...
}
void hardlockup_detector_perf_cleanup(void)
{
...
perf_event_release_kernel(event);
per_cpu(dead_event, cpu) = NULL;
}
+ mdelay(100);
cpumask_clear(&dead_events_mask);
}
Then, simultaneously performing CPU on/off and switching watchdog, it is
almost certain to reproduce this leak.
The problem here is that releasing perf_event is not within the CPU
hotplug read-write lock. Commit:
941154bd6937 ("watchdog/hardlockup/perf: Prevent CPU hotplug deadlock")
introduced deferred release to solve the deadlock caused by calling
get_online_cpus() when releasing perf_event. Later, commit:
efe951d3de91 ("perf/x86: Fix perf,x86,cpuhp deadlock")
removed the get_online_cpus() call on the perf_event release path to solve
another deadlock problem.
Therefore, it is now possible to move the release of perf_event back
into the CPU hotplug read-write lock, and release the event immediately
after disabling it.
Fixes: 941154bd6937 ("watchdog/hardlockup/perf: Prevent CPU hotplug deadlock")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241021193004.308303-1-lihuafei1@huawei.com
|
|
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
|
|
It is already difficult for users to troubleshoot which of multiple pid
limits restricts their workload. The per-(hierarchical-)NS pid_max would
contribute to the confusion.
Also, the implementation copies the limit upon creation from
parent, this pattern showed cumbersome with some attributes in legacy
cgroup controllers -- it's subject to race condition between parent's
limit modification and children creation and once copied it must be
changed in the descendant.
Let's do what other places do (ucounts or cgroup limits) -- create new
pid namespaces without any limit at all. The global limit (actually any
ancestor's limit) is still effectively in place, we avoid the
set/unshare race and bumps of global (ancestral) limit have the desired
effect on pid namespace that do not care.
Link: https://lore.kernel.org/r/20240408145819.8787-1-mkoutny@suse.com/
Link: https://lore.kernel.org/r/20250221170249.890014-1-mkoutny@suse.com/
Fixes: 7863dcc72d0f4 ("pid: allow pid_max to be set per pid namespace")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250305145849.55491-1-mkoutny@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
child_cfs_rq_on_list attempts to convert a 'prev' pointer to a cfs_rq.
This 'prev' pointer can originate from struct rq's leaf_cfs_rq_list,
making the conversion invalid and potentially leading to memory
corruption. Depending on the relative positions of leaf_cfs_rq_list and
the task group (tg) pointer within the struct, this can cause a memory
fault or access garbage data.
The issue arises in list_add_leaf_cfs_rq, where both
cfs_rq->leaf_cfs_rq_list and rq->leaf_cfs_rq_list are added to the same
leaf list. Also, rq->tmp_alone_branch can be set to rq->leaf_cfs_rq_list.
This adds a check `if (prev == &rq->leaf_cfs_rq_list)` after the main
conditional in child_cfs_rq_on_list. This ensures that the container_of
operation will convert a correct cfs_rq struct.
This check is sufficient because only cfs_rqs on the same CPU are added
to the list, so verifying the 'prev' pointer against the current rq's list
head is enough.
Fixes a potential memory corruption issue that due to current struct
layout might not be manifesting as a crash but could lead to unpredictable
behavior when the layout changes.
Fixes: fdaba61ef8a2 ("sched/fair: Ensure that the CFS parent is added after unthrottling")
Signed-off-by: Zecheng Li <zecheng@google.com>
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250304214031.2882646-1-zecheng@google.com
|
|
Many devices implement highly accurate clocks, which the kernel manages
as PTP Hardware Clocks (PHCs). Userspace applications rely on these
clocks to timestamp events, trace workload execution, correlate
timescales across devices, and keep various clocks in sync.
The kernel’s current implementation of PTP clocks does not enforce file
permissions checks for most device operations except for POSIX clock
operations, where file mode is verified in the POSIX layer before
forwarding the call to the PTP subsystem. Consequently, it is common
practice to not give unprivileged userspace applications any access to
PTP clocks whatsoever by giving the PTP chardevs 600 permissions. An
example of users running into this limitation is documented in [1].
Additionally, POSIX layer requires WRITE permission even for readonly
adjtime() calls which are used in PTP layer to return current frequency
offset applied to the PHC.
Add permission checks for functions that modify the state of a PTP
device. Continue enforcing permission checks for POSIX clock operations
(settime, adjtime) in the POSIX layer. Only require WRITE access for
dynamic clocks adjtime() if any flags are set in the modes field.
[1] https://lists.nwtime.org/sympa/arc/linuxptp-users/2024-01/msg00036.html
Changes in v4:
- Require FMODE_WRITE in ajtime() only for calls modifying the clock in
any way.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
File descriptor based pc_clock_*() operations of dynamic posix clocks
have access to the file pointer and implement permission checks in the
generic code before invoking the relevant dynamic clock callback.
Character device operations (open, read, poll, ioctl) do not implement a
generic permission control and the dynamic clock callbacks have no
access to the file pointer to implement them.
Extend struct posix_clock_context with a struct file pointer and
initialize it in posix_clock_open(), so that all dynamic clock callbacks
can access it.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Record the exit code and cgroupid in release_task() and stash in struct
pidfs_exit_info so it can be retrieved even after the task has been
reaped.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-5-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Instead od adding it into __pidfd_prepare() place it where the actual
file allocation happens and update the outdated comment.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-3-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rely on scope-based cleanup for the allocated file descriptor.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-2-c8c3d8361705@kernel.org
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make sure that perf_try_init_event() doesn't leave event->pmu nor
event->destroy set on failure.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250205102449.110145835@infradead.org
|
|
'misc.2025.03.04a', 'srcu.2025.02.05a' and 'torture.2025.02.05a'
|
|
PREEMPT_LAZY can be enabled stand-alone or alongside PREEMPT_DYNAMIC
which allows for dynamic switching of preemption models.
The choice of PREEMPT_RCU or not, however, is fixed at compile time.
Given that PREEMPT_RCU makes some trade-offs to optimize for latency
as opposed to throughput, configurations with limited preemption
might prefer the stronger forward-progress guarantees of PREEMPT_RCU=n.
Accordingly, explicitly limit PREEMPT_RCU=y to the latency oriented
preemption models: PREEMPT, PREEMPT_RT, and the runtime configurable
model PREEMPT_DYNAMIC.
This means the throughput oriented models, PREEMPT_NONE,
PREEMPT_VOLUNTARY, and PREEMPT_LAZY will run with PREEMPT_RCU=n.
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The rcutorture_one_extend_check() function's second last check assumes
that "preempt_count() & PREEMPT_MASK" is non-zero only if
RCUTORTURE_RDR_PREEMPT or RCUTORTURE_RDR_SCHED bit is set.
This works for preemptible RCU and for non-preemptible RCU running in
a non-preemptible kernel. But it fails for non-preemptible RCU running
in a preemptible kernel because then rcu_read_lock() is just
preempt_disable(), which increases preempt count.
This commit therefore adjusts this check to take into account the case
fo non-preemptible RCU running in a preemptible kernel.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The rcutorture_one_extend_check() function's last check assumes that
if cur_ops->readlock_nesting() returns greater than zero, either the
RCUTORTURE_RDR_RCU_1 or the RCUTORTURE_RDR_RCU_2 bit must be set, that
is, there must be at least one rcu_read_lock() in effect.
This works for preemptible RCU and for non-preemptible RCU running in
a non-preemptible kernel. But it fails for non-preemptible RCU running
in a preemptible kernel because then RCU's cur_ops->readlock_nesting()
function, which is rcu_torture_readlock_nesting(), will return
the PREEMPT_MASK mask bits from preempt_count(). The result will
be greater than zero if preemption is disabled, including by the
RCUTORTURE_RDR_PREEMPT and RCUTORTURE_RDR_SCHED bits.
This commit therefore adjusts this check to take into account the case
fo non-preemptible RCU running in a preemptible kernel.
[boqun: Fix the if condition and add comment]
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171415.8ec87c87-lkp@intel.com
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
To reduce RCU noise for nohz_full configurations, osnoise depends
on cond_resched() providing quiescent states for PREEMPT_RCU=n
configurations. For PREEMPT_RCU=y configurations -- where
cond_resched() is a stub -- we do this by directly calling
rcu_momentary_eqs().
With (PREEMPT_LAZY=y, PREEMPT_DYNAMIC=n), however, we have a
configuration with (PREEMPTION=y, PREEMPT_RCU=n) where neither
of the above can help.
Handle that by providing an explicit quiescent state here for all
configurations.
As mentioned above this is not needed for non-stubbed cond_resched(),
but, providing a quiescent state here just pulls in one that a future
cond_resched() would provide, so doesn't cause any extra work for
this configuration.
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Switch for using of get_state_synchronize_rcu_full() and
poll_state_synchronize_rcu_full() pair to debug a normal
synchronize_rcu() call.
Just using "not" full APIs to identify if a grace period is
passed or not might lead to a false-positive kernel splat.
It can happen, because get_state_synchronize_rcu() compresses
both normal and expedited states into one single unsigned long
value, so a poll_state_synchronize_rcu() can miss GP-completion
when synchronize_rcu()/synchronize_rcu_expedited() concurrently
run.
To address this, switch to poll_state_synchronize_rcu_full() and
get_state_synchronize_rcu_full() APIs, which use separate variables
for expedited and normal states.
Reported-by: cheung wall <zzqq0103.hey@gmail.com>
Closes: https://lore.kernel.org/lkml/Z5ikQeVmVdsWQrdD@pc636/T/
Fixes: 988f569ae041 ("rcu: Reduce synchronize_rcu() latency")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20250227131613.52683-3-urezki@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Currently "nfakewriters" parameter can be set to any value but
there is no possibility to adjust it automatically based on how
many CPUs a system has where a test is run on.
To address this, if the "nfakewriters" is set to negative it will
be adjusted to num_online_cpus() during torture initialization.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lore.kernel.org/r/20250227131613.52683-1-urezki@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Kernels built with CONFIG_PREEMPT_RT=y can lose significant console output
and shutdown time, which hides shutdown-time RCU issues from rcutorture.
Therefore, make pr_flush() public and invoke it after then last print
in kernel_power_off().
[ paulmck: Apply John Ogness feedback. ]
[ paulmck: Appy Sebastian Andrzej Siewior feedback. ]
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/5f743488-dc2a-4f19-bdda-cf50b9314832@paulmck-laptop
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The WARN_ON_ONCE() in ct_kernel_exit_state() follows the call to
ct_state_inc(), which means that RCU is not watching this WARN_ON_ONCE().
This can (and does) result in extraneous lockdep warnings when this
WARN_ON_ONCE() triggers. These extraneous warnings are the opposite
of helpful.
Therefore, invert the WARN_ON_ONCE() condition and move it before the
call to ct_state_inc(). This does mean that the ct_state_inc() return
value can no longer be used in the WARN_ON_ONCE() condition, so discard
this return value and instead use a call to rcu_is_watching_curr_cpu().
This call is executed only in CONFIG_RCU_EQS_DEBUG=y kernels, so there
is no added overhead in production use.
[Boqun: Add the subsystem tag in the title]
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/bd911cd9-1fe9-447c-85e0-ea811a1dc896@paulmck-laptop
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Analysis of an rcutorture callback-based forward-progress test failure was
hampered by the lack of ->cblist segment lengths. This commit therefore
adds this information, so that what would have been ".W85620.N." (there
are some callbacks waiting for grace period sequence number 85620 and
some number more that have not yet been assigned to a grace period)
now prints as ".W2(85620).N6." (there are 2 callbacks waiting for grace
period 85620 and 6 not yet assigned to a grace period). Note that
"D" (done), "N" (next and not yet assigned to a grace period, and "B"
(bypass, also not yet assigned to a grace period) have just the number
of callbacks without the parenthesized grace-period sequence number.
In contrast, "W" (waiting for the current grace period) and "R" (ready
to wait for the next grace period to start) both have parenthesized
grace-period sequence numbers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The timer and hrtimer softirq processing has moved to dedicated threads
for kernels built with CONFIG_IRQ_FORCED_THREADING=y. This results in
timers not expiring until later in early boot, which in turn causes the
RCU Tasks self-tests to hang in kernels built with CONFIG_PROVE_RCU=y,
which further causes the entire kernel to hang. One fix would be to
make timers work during this time, but there are no known users of RCU
Tasks grace periods during that time, so no justification for the added
complexity. Not yet, anyway.
This commit therefore moves the call to rcu_init_tasks_generic() from
kernel_init_freeable() to a core_initcall(). This works because the
timer and hrtimer kthreads are created at early_initcall() time.
Fixes: 49a17639508c3 ("softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <linux-trace-kernel@vger.kernel.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The get_state_synchronize_rcu_full() and poll_state_synchronize_rcu_full()
functions use the root rcu_node structure's ->gp_seq field to detect
the beginnings and ends of grace periods, respectively. This choice is
necessary for the poll_state_synchronize_rcu_full() function because
(give or take counter wrap), the following sequence is guaranteed not
to trigger:
get_state_synchronize_rcu_full(&rgos);
synchronize_rcu();
WARN_ON_ONCE(!poll_state_synchronize_rcu_full(&rgos));
The RCU callbacks that awaken synchronize_rcu() instances are
guaranteed not to be invoked before the root rcu_node structure's
->gp_seq field is updated to indicate the end of the grace period.
However, these callbacks might start being invoked immediately
thereafter, in particular, before rcu_state.gp_seq has been updated.
Therefore, poll_state_synchronize_rcu_full() must refer to the
root rcu_node structure's ->gp_seq field. Because this field is
updated under this structure's ->lock, any code following a call to
poll_state_synchronize_rcu_full() will be fully ordered after the
full grace-period computation, as is required by RCU's memory-ordering
semantics.
By symmetry, the get_state_synchronize_rcu_full() function should also
use this same root rcu_node structure's ->gp_seq field. But it turns out
that symmetry is profoundly (though extremely infrequently) destructive
in this case. To see this, consider the following sequence of events:
1. CPU 0 starts a new grace period, and updates rcu_state.gp_seq
accordingly.
2. As its first step of grace-period initialization, CPU 0 examines
the current CPU hotplug state and decides that it need not wait
for CPU 1, which is currently offline.
3. CPU 1 comes online, and updates its state. But this does not
affect the current grace period, but rather the one after that.
After all, CPU 1 was offline when the current grace period
started, so all pre-existing RCU readers on CPU 1 must have
completed or been preempted before it last went offline.
The current grace period therefore has nothing it needs to wait
for on CPU 1.
4. CPU 1 switches to an rcutorture kthread which is running
rcutorture's rcu_torture_reader() function, which starts a new
RCU reader.
5. CPU 2 is running rcutorture's rcu_torture_writer() function
and collects a new polled grace-period "cookie" using
get_state_synchronize_rcu_full(). Because the newly started
grace period has not completed initialization, the root rcu_node
structure's ->gp_seq field has not yet been updated to indicate
that this new grace period has already started.
This cookie is therefore set up for the end of the current grace
period (rather than the end of the following grace period).
6. CPU 0 finishes grace-period initialization.
7. If CPU 1’s rcutorture reader is preempted, it will be added to
the ->blkd_tasks list, but because CPU 1’s ->qsmask bit is not
set in CPU 1's leaf rcu_node structure, the ->gp_tasks pointer
will not be updated. Thus, this grace period will not wait on
it. Which is only fair, given that the CPU did not come online
until after the grace period officially started.
8. CPUs 0 and 2 then detect the new grace period and then report
a quiescent state to the RCU core.
9. Because CPU 1 was offline at the start of the current grace
period, CPUs 0 and 2 are the only CPUs that this grace period
needs to wait on. So the grace period ends and post-grace-period
cleanup starts. In particular, the root rcu_node structure's
->gp_seq field is updated to indicate that this grace period
has now ended.
10. CPU 2 continues running rcu_torture_writer() and sees that,
from the viewpoint of the root rcu_node structure consulted by
the poll_state_synchronize_rcu_full() function, the grace period
has ended. It therefore updates state accordingly.
11. CPU 1 is still running the same RCU reader, which notices this
update and thus complains about the too-short grace period.
The fix is for the get_state_synchronize_rcu_full() function to use
rcu_state.gp_seq instead of the root rcu_node structure's ->gp_seq field.
With this change in place, if step 5's cookie indicates that the grace
period has not yet started, then any prior code executed by CPU 2 must
have happened before CPU 1 came online. This will in turn prevent CPU
1's code in steps 3 and 11 from spanning CPU 2's grace-period wait,
thus preventing CPU 1 from being subjected to a too-short grace period.
This commit therefore makes this change. Note that there is no change to
the poll_state_synchronize_rcu_full() function, which as noted above,
must continue to use the root rcu_node structure's ->gp_seq field.
This is of course an asymmetry between these two functions, but is an
asymmetry that is absolutely required for correct operation. It is a
common human tendency to greatly value symmetry, and sometimes symmetry
is a wonderful thing. Other times, symmetry results in poor performance.
But in this case, symmetry is just plain wrong.
Nevertheless, the asymmetry does require an additional adjustment.
It is possible for get_state_synchronize_rcu_full() to see a given
grace period as having started, but for an immediately following
poll_state_synchronize_rcu_full() to see it as having not yet started.
Given the current rcu_seq_done_exact() implementation, this will
result in a false-positive indication that the grace period is done
from poll_state_synchronize_rcu_full(). This is dealt with by making
rcu_seq_done_exact() reach back three grace periods rather than just
two of them.
However, simply changing get_state_synchronize_rcu_full() function to
use rcu_state.gp_seq instead of the root rcu_node structure's ->gp_seq
field results in a theoretical bug in kernels booted with
rcutree.rcu_normal_wake_from_gp=1 due to the following sequence of
events:
o The rcu_gp_init() function invokes rcu_seq_start() to officially
start a new grace period.
o A new RCU reader begins, referencing X from some RCU-protected
list. The new grace period is not obligated to wait for this
reader.
o An updater removes X, then calls synchronize_rcu(), which queues
a wait element.
o The grace period ends, awakening the updater, which frees X
while the reader is still referencing it.
The reason that this is theoretical is that although the grace period
has officially started, none of the CPUs are officially aware of this,
and thus will have to assume that the RCU reader pre-dated the start of
the grace period. Detailed explanation can be found at [2] and [3].
Except for kernels built with CONFIG_PROVE_RCU=y, which use the polled
grace-period APIs, which can and do complain bitterly when this sequence
of events occurs. Not only that, there might be some future RCU
grace-period mechanism that pulls this sequence of events from theory
into practice. This commit therefore also pulls the call to
rcu_sr_normal_gp_init() to precede that to rcu_seq_start().
Although this fixes commit 91a967fd6934 ("rcu: Add full-sized polling
for get_completed*() and poll_state*()"), it is not clear that it is
worth backporting this commit. First, it took me many weeks to convince
rcutorture to reproduce this more frequently than once per year.
Second, this cannot be reproduced at all without frequent CPU-hotplug
operations, as in waiting all of 50 milliseconds from the end of the
previous operation until starting the next one. Third, the TREE03.boot
settings cause multi-millisecond delays during RCU grace-period
initialization, which greatly increase the probability of the above
sequence of events. (Don't do this in production workloads!) Fourth,
the TREE03 rcutorture scenario was modified to use four-CPU guest OSes,
to have a single-rcu_node combining tree, no testing of RCU priority
boosting, and no random preemption, and these modifications were
necessary to reproduce this issue in a reasonable timeframe. Fifth,
extremely heavy use of get_state_synchronize_rcu_full() and/or
poll_state_synchronize_rcu_full() is required to reproduce this, and as
of v6.12, only kfree_rcu() uses it, and even then not particularly
heavily.
[boqun: Apply the fix [1], and add the comment before the moved
rcu_sr_normal_gp_init(). Additional links are added for explanation.]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lore.kernel.org/rcu/d90bd6d9-d15c-4b9b-8a69-95336e74e8f4@paulmck-laptop/ [1]
Link: https://lore.kernel.org/rcu/20250303001507.GA3994772@joelnvbox/ [2]
Link: https://lore.kernel.org/rcu/Z8bcUsZ9IpRi1QoP@pc636/ [3]
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-5-brgerst@gmail.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add tracing support to track sched_ext core events
(/sched_ext/sched_ext_event). This may be useful for debugging sched_ext
schedulers that trigger a particular event.
The trace point can be used as other trace points, so it can be used in,
for example, `perf trace` and BPF programs, as follows:
======
$> sudo perf trace -e sched_ext:sched_ext_event --filter 'name == "SCX_EV_ENQ_SLICE_DFL"'
======
======
struct tp_sched_ext_event {
struct trace_entry ent;
u32 __data_loc_name;
s64 delta;
};
SEC("tracepoint/sched_ext/sched_ext_event")
int rtp_add_event(struct tp_sched_ext_event *ctx)
{
char event_name[128];
unsigned short offset = ctx->__data_loc_name & 0xFFFF;
bpf_probe_read_str((void *)event_name, 128, (char *)ctx + offset);
bpf_printk("name %s delta %lld", event_name, ctx->delta);
return 0;
}
======
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The event count could be negative in the future,
so change the event type from u64 to s64.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Some monitor files like the main header and the Kconfig are missing the
license identifier.
Add it to those and make sure the automatic generation script includes
the line in newly created monitors.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250218123121.253551-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Wire up the code to print function arguments in the function tracer.
This functionality can be enabled/disabled during runtime with
options/func-args.
ping-689 [004] b.... 77.170220: dummy_xmit(skb = 0x82904800, dev = 0x882d0000) <-dev_hard_start_xmit
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185823.154996172@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, when function_graph is started, it looks at the option
funcgraph-args, and if it is set, it will enable tracing of the arguments.
But if tracing is already running, and the user enables funcgraph-args, it
will have no effect. Instead, it should enable argument tracing when it is
enabled, even if it means disabling the function graph tracing for a short
time in order to do the transition.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.978998710@goodmis.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Wire up the code to print function arguments in the function graph
tracer. This functionality can be enabled/disabled during runtime with
options/funcgraph-args.
Example usage:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.810321199@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a function to decode argument types with the help of BTF. Will
be used to display arguments in the function and function graph
tracer.
It can only handle simply arguments and up to FTRACE_REGS_MAX_ARGS number
of arguments. When it hits a max, it will print ", ...":
page_to_skb(vi=0xffff8d53842dc980, rq=0xffff8d53843a0800, page=0xfffffc2e04337c00, offset=6160, len=64, truesize=1536, ...)
And if it hits an argument that is not recognized, it will print the raw
value and the type of argument it is:
make_vfsuid(idmap=0xffffffff87f99db8, fs_userns=0xffffffff87e543c0, kuid=0x0 (STRUCT))
__pti_set_user_pgtbl(pgdp=0xffff8d5384ab47f8, pgd=0x110e74067 (STRUCT))
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.639418500@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The ftrace_free_filter() is used to reset the ops filters. But it must be
done if the ops is not currently active (tracing). If it is, it will mess
up the ftrace accounting of what functions are attached and what is not.
WARN and exit the ftrace_free_filter() if the ops is active when it is
called.
Currently, it doesn't seem if anything does this, but it may in the
future.
Link: https://lore.kernel.org/all/20250219095330.2e9f171c@gandalf.local.home/
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250219135040.3a9fbe00@gandalf.local.home
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250218122052.58348-1-haiyuewa@163.com
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add detailed comments to clarify the purpose of klp_add_nops() function.
These comments are based on Petr's explanation[0].
Link: https://lore.kernel.org/all/Z6XUA7D0eU_YDMVp@pathway.suse.cz/ [0]
Suggested-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250227024733.16989-2-laoar.shao@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
