summaryrefslogtreecommitdiff
path: root/net/ipv6/addrconf.c
AgeCommit message (Collapse)Author
2024-03-01ipv6: use xa_array iterator to implement inet6_netconf_dump_devconf()Eric Dumazet
1) inet6_netconf_dump_devconf() can run under RCU protection instead of RTNL. 2) properly return 0 at the end of a dump, avoiding an an extra recvmsg() system call. 3) Do not use inet6_base_seq() anymore, for_each_netdev_dump() has nice properties. Restarting a GETDEVCONF dump if a device has been added/removed or if net->ipv6.dev_addr_genid has changed is moot. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6/addrconf: annotate data-races around devconf fields (II)Eric Dumazet
Final (?) round of this series. Annotate lockless reads on following devconf fields, because they be changed concurrently from /proc/net/ipv6/conf. - accept_dad - optimistic_dad - use_optimistic - use_oif_addrs_only - ra_honor_pio_life - keep_addr_on_down - ndisc_notify - ndisc_evict_nocarrier - suppress_frag_ndisc - addr_gen_mode - seg6_enabled - ioam6_enabled - ioam6_id - ioam6_id_wide - drop_unicast_in_l2_multicast - mldv[12]_unsolicited_report_interval - force_mld_version - force_tllao - accept_untracked_na - drop_unsolicited_na - accept_source_route Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6/addrconf: annotate data-races around devconf fields (I)Eric Dumazet
Annotate lockless reads and writes on following devconf fields: - regen_min_advance - regen_max_retry - dad_transmits - use_tempaddr - max_addresses - max_desync_factor - temp_valid_lft - rtr_solicits - rtr_solicit_max_interval - rtr_solicit_interval - rtr_solicit_delay - enhanced_dad - accept_redirects Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: addrconf_disable_policy() optimizationEric Dumazet
Writing over /proc/sys/net/ipv6/conf/default/disable_policy does not need to hold RTNL. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around devconf->disable_policyEric Dumazet
idev->cnf.disable_policy and net->ipv6.devconf_all->disable_policy can be read locklessly. Add appropriate annotations on reads and writes. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around devconf->proxy_ndpEric Dumazet
devconf->proxy_ndp can be read and written locklessly, add appropriate annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around idev->cnf.ignore_routes_with_linkdownEric Dumazet
idev->cnf.ignore_routes_with_linkdown can be used without any locks, add appropriate annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around cnf.forwardingEric Dumazet
idev->cnf.forwarding and net->ipv6.devconf_all->forwarding might be read locklessly, add appropriate READ_ONCE() and WRITE_ONCE() annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around cnf.mtu6Eric Dumazet
idev->cnf.mtu6 might be read locklessly, add appropriate READ_ONCE() and WRITE_ONCE() annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: addrconf_disable_ipv6() optimizationEric Dumazet
Writing over /proc/sys/net/ipv6/conf/default/disable_ipv6 does not need to hold RTNL. v3: remove a wrong change (Jakub Kicinski feedback) Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around cnf.disable_ipv6Eric Dumazet
disable_ipv6 is read locklessly, add appropriate READ_ONCE() and WRITE_ONCE() annotations. v2: do not preload net before rtnl_trylock() in addrconf_disable_ipv6() (Jiri) Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28inet6: expand rcu_read_lock() scope in inet6_dump_addr()Eric Dumazet
I missed that inet6_dump_addr() is calling in6_dump_addrs() from two points. First one under RTNL protection, and second one under rcu_read_lock(). Since we want to remove RTNL use from inet6_dump_addr() very soon, no longer assume in6_dump_addrs() is protected by RTNL (even if this is still the case). Use rcu_read_lock() earlier to fix this lockdep splat: WARNING: suspicious RCU usage 6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0 Not tainted net/ipv6/addrconf.c:5317 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syz-executor.2/8834: #0: ffff88802f554678 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x119/0x780 net/netlink/af_netlink.c:2338 #1: ffffffff8f377a88 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0x676/0xda0 net/netlink/af_netlink.c:2265 #2: ffff88807e5f0580 (&ndev->lock){++--}-{2:2}, at: in6_dump_addrs+0xb8/0x1de0 net/ipv6/addrconf.c:5279 stack backtrace: CPU: 1 PID: 8834 Comm: syz-executor.2 Not tainted 6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 lockdep_rcu_suspicious+0x220/0x340 kernel/locking/lockdep.c:6712 in6_dump_addrs+0x1b47/0x1de0 net/ipv6/addrconf.c:5317 inet6_dump_addr+0x1597/0x1690 net/ipv6/addrconf.c:5428 netlink_dump+0x6a6/0xda0 net/netlink/af_netlink.c:2266 __netlink_dump_start+0x59d/0x780 net/netlink/af_netlink.c:2374 netlink_dump_start include/linux/netlink.h:340 [inline] rtnetlink_rcv_msg+0xcf7/0x10d0 net/core/rtnetlink.c:6555 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2547 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8e0/0xcb0 net/netlink/af_netlink.c:1902 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 Fixes: c3718936ec47 ("ipv6: anycast: complete RCU handling of struct ifacaddr6") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240227222259.4081489-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26ipv6: anycast: complete RCU handling of struct ifacaddr6Eric Dumazet
struct ifacaddr6 are already freed after RCU grace period. Add __rcu qualifier to aca_next pointer, and idev->ac_list Add relevant rcu_assign_pointer() and dereference accessors. ipv6_chk_acast_dev() no longer needs to acquire idev->lock. /proc/net/anycast6 is now purely RCU protected, it no longer acquires idev->lock. Similarly in6_dump_addrs() can use RCU protection to iterate through anycast addresses. It was relying on a mixture of RCU and RTNL but next patches will get rid of RTNL there. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240223201054.220534-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26ipv6: fix potential "struct net" leak in inet6_rtm_getaddr()Eric Dumazet
It seems that if userspace provides a correct IFA_TARGET_NETNSID value but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr() returns -EINVAL with an elevated "struct net" refcount. Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-26ipv6: switch inet6_dump_ifinfo() to RCU protectionEric Dumazet
No longer hold RTNL while calling inet6_dump_ifinfo() Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-26ipv6: use xarray iterator to implement inet6_dump_ifinfo()Eric Dumazet
Prepare inet6_dump_ifinfo() to run with RCU protection instead of RTNL and use for_each_netdev_dump() interface. Also properly return 0 at the end of a dump, avoiding an extra recvmsg() system call and RTNL acquisition. Note that RTNL-less dumps need core changes, coming later in the series. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-26ipv6: prepare inet6_fill_ifinfo() for RCU protectionEric Dumazet
We want to use RCU protection instead of RTNL for inet6_fill_ifinfo(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-26ipv6: prepare inet6_fill_ifla6_attrs() for RCUEric Dumazet
We want to no longer hold RTNL while calling inet6_fill_ifla6_attrs() in the future. Add needed READ_ONCE()/WRITE_ONCE() annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/ipv4/udp.c f796feabb9f5 ("udp: add local "peek offset enabled" flag") 56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)") Adjacent changes: net/unix/garbage.c aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.") 11498715f266 ("af_unix: Remove io_uring code for GC.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-18ipv6: properly combine dev_base_seq and ipv6.dev_addr_genidEric Dumazet
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing. If we XOR their values, we could miss to detect if both values were changed with the same amount. Fixes: 63998ac24f83 ("ipv6: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-15net: ipv6/addrconf: clamp preferred_lft to the minimum requiredAlex Henrie
If the preferred lifetime was less than the minimum required lifetime, ipv6_create_tempaddr would error out without creating any new address. On my machine and network, this error happened immediately with the preferred lifetime set to 5 seconds or less, after a few minutes with the preferred lifetime set to 6 seconds, and not at all with the preferred lifetime set to 7 seconds. During my investigation, I found a Stack Exchange post from another person who seems to have had the same problem: They stopped getting new addresses if they lowered the preferred lifetime below 3 seconds, and they didn't really know why. The preferred lifetime is a preference, not a hard requirement. The kernel does not strictly forbid new connections on a deprecated address, nor does it guarantee that the address will be disposed of the instant its total valid lifetime expires. So rather than disable IPv6 privacy extensions altogether if the minimum required lifetime swells above the preferred lifetime, it is more in keeping with the user's intent to increase the temporary address's lifetime to the minimum necessary for the current network conditions. With these fixes, setting the preferred lifetime to 5 or 6 seconds "just works" because the extra fraction of a second is practically unnoticeable. It's even possible to reduce the time before deprecation to 1 or 2 seconds by setting /proc/sys/net/ipv6/conf/*/regen_min_advance and /proc/sys/net/ipv6/conf/*/dad_transmits to 0. I realize that that is a pretty niche use case, but I know at least one person who would gladly sacrifice performance and convenience to be sure that they are getting the maximum possible level of privacy. Link: https://serverfault.com/a/1031168/310447 Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15net: ipv6/addrconf: introduce a regen_min_advance sysctlAlex Henrie
In RFC 8981, REGEN_ADVANCE cannot be less than 2 seconds, and the RFC does not permit the creation of temporary addresses with lifetimes shorter than that: > When processing a Router Advertisement with a > Prefix Information option carrying a prefix for the purposes of > address autoconfiguration (i.e., the A bit is set), the host MUST > perform the following steps: > 5. A temporary address is created only if this calculated preferred > lifetime is greater than REGEN_ADVANCE time units. However, some users want to change their IPv6 address as frequently as possible regardless of the RFC's arbitrary minimum lifetime. For the benefit of those users, add a regen_min_advance sysctl parameter that can be set to below or above 2 seconds. Link: https://datatracker.ietf.org/doc/html/rfc8981 Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-15net: ipv6/addrconf: ensure that regen_advance is at least 2 secondsAlex Henrie
RFC 8981 defines REGEN_ADVANCE as follows: REGEN_ADVANCE = 2 + (TEMP_IDGEN_RETRIES * DupAddrDetectTransmits * RetransTimer / 1000) Thus, allowing it to be less than 2 seconds is technically a protocol violation. Link: https://datatracker.ietf.org/doc/html/rfc8981#name-defined-protocol-parameters Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-14net-sysfs: convert dev->operstate reads to lockless onesEric Dumazet
operstate_show() can omit dev_base_lock acquisition only to read dev->operstate. Annotate accesses to dev->operstate. Writers still acquire dev_base_lock for mutual exclusion. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12net/ipv6: set expires in modify_prefix_route() if RTF_EXPIRES is set.Kui-Feng Lee
Make the decision to set or clean the expires of a route based on the RTF_EXPIRES flag, rather than the value of the "expires" argument. This patch doesn't make difference logically, but make inet6_addr_modify() and modify_prefix_route() consistent. The function inet6_addr_modify() is the only caller of modify_prefix_route(), and it passes the RTF_EXPIRES flag and an expiration value. The RTF_EXPIRES flag is turned on or off based on the value of valid_lft. The RTF_EXPIRES flag is turned on if valid_lft is a finite value (not infinite, not 0xffffffff). Even if valid_lft is 0, the RTF_EXPIRES flag remains on. The expiration value being passed is equal to the valid_lft value if the flag is on. However, if the valid_lft value is infinite, the expiration value becomes 0 and the RTF_EXPIRES flag is turned off. Despite this, modify_prefix_route() decides to set the expiration value if the received expiration value is not zero. This mixing of infinite and zero cases creates an inconsistency. Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12net/ipv6: Remove expired routes with a separated list of routes.Kui-Feng Lee
FIB6 GC walks trees of fib6_tables to remove expired routes. Walking a tree can be expensive if the number of routes in a table is big, even if most of them are permanent. Checking routes in a separated list of routes having expiration will avoid this potential issue. Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02ipv6: make addrconf_wq single threadedEric Dumazet
Both addrconf_verify_work() and addrconf_dad_work() acquire rtnl, there is no point trying to have one thread per cpu. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240201173031.3654257-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum required"Alex Henrie
The commit had a bug and might not have been the right approach anyway. Fixes: 629df6701c8a ("net: ipv6/addrconf: clamp preferred_lft to the minimum required") Fixes: ec575f885e3e ("Documentation: networking: explain what happens if temp_prefered_lft is too small or too large") Reported-by: Dan Moulding <dan@danm.net> Closes: https://lore.kernel.org/netdev/20231221231115.12402-1-dan@danm.net/ Link: https://lore.kernel.org/netdev/CAMMLpeTdYhd=7hhPi2Y7pwdPCgnnW5JYh-bu3hSc7im39uxnEA@mail.gmail.com/ Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20231230043252.10530-1-alexhenrie24@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIXMaciej Żenczykowski
Lorenzo points out that we effectively clear all unknown flags from PIO when copying them to userspace in the netlink RTM_NEWPREFIX notification. We could fix this one at a time as new flags are defined, or in one fell swoop - I choose the latter. We could either define 6 new reserved flags (reserved1..6) and handle them individually (and rename them as new flags are defined), or we could simply copy the entire unmodified byte over - I choose the latter. This unfortunately requires some anonymous union/struct magic, so we add a static assert on the struct size for a little extra safety. Cc: David Ahern <dsahern@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-25net: ipv6/addrconf: clamp preferred_lft to the minimum requiredAlex Henrie
If the preferred lifetime was less than the minimum required lifetime, ipv6_create_tempaddr would error out without creating any new address. On my machine and network, this error happened immediately with the preferred lifetime set to 1 second, after a few minutes with the preferred lifetime set to 4 seconds, and not at all with the preferred lifetime set to 5 seconds. During my investigation, I found a Stack Exchange post from another person who seems to have had the same problem: They stopped getting new addresses if they lowered the preferred lifetime below 3 seconds, and they didn't really know why. The preferred lifetime is a preference, not a hard requirement. The kernel does not strictly forbid new connections on a deprecated address, nor does it guarantee that the address will be disposed of the instant its total valid lifetime expires. So rather than disable IPv6 privacy extensions altogether if the minimum required lifetime swells above the preferred lifetime, it is more in keeping with the user's intent to increase the temporary address's lifetime to the minimum necessary for the current network conditions. With these fixes, setting the preferred lifetime to 3 or 4 seconds "just works" because the extra fraction of a second is practically unnoticeable. It's even possible to reduce the time before deprecation to 1 or 2 seconds by also disabling duplicate address detection (setting /proc/sys/net/ipv6/conf/*/dad_transmits to 0). I realize that that is a pretty niche use case, but I know at least one person who would gladly sacrifice performance and convenience to be sure that they are getting the maximum possible level of privacy. Link: https://serverfault.com/a/1031168/310447 Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20231024212312.299370-3-alexhenrie24@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-25net: ipv6/addrconf: clamp preferred_lft to the maximum allowedAlex Henrie
Without this patch, there is nothing to stop the preferred lifetime of a temporary address from being greater than its valid lifetime. If that was the case, the valid lifetime was effectively ignored. Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20231024212312.299370-2-alexhenrie24@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03net: add sysctl to disable rfc4862 5.5.3e lifetime handlingPatrick Rohr
This change adds a sysctl to opt-out of RFC4862 section 5.5.3e's valid lifetime derivation mechanism. RFC4862 section 5.5.3e prescribes that the valid lifetime in a Router Advertisement PIO shall be ignored if it less than 2 hours and to reset the lifetime of the corresponding address to 2 hours. An in-progress 6man draft (see draft-ietf-6man-slaac-renum-07 section 4.2) is currently looking to remove this mechanism. While this draft has not been moving particularly quickly for other reasons, there is widespread consensus on section 4.2 which updates RFC4862 section 5.5.3e. Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Jen Linkova <furry@google.com> Signed-off-by: Patrick Rohr <prohr@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230925214711.959704-1-prohr@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-07Merge tag 'net-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking updates from Jakub Kicinski: "Including fixes from netfilter and bpf. Current release - regressions: - eth: stmmac: fix failure to probe without MAC interface specified Current release - new code bugs: - docs: netlink: fix missing classic_netlink doc reference Previous releases - regressions: - deal with integer overflows in kmalloc_reserve() - use sk_forward_alloc_get() in sk_get_meminfo() - bpf_sk_storage: fix the missing uncharge in sk_omem_alloc - fib: avoid warn splat in flow dissector after packet mangling - skb_segment: call zero copy functions before using skbuff frags - eth: sfc: check for zero length in EF10 RX prefix Previous releases - always broken: - af_unix: fix msg_controllen test in scm_pidfd_recv() for MSG_CMSG_COMPAT - xsk: fix xsk_build_skb() dereferencing possible ERR_PTR() - netfilter: - nft_exthdr: fix non-linear header modification - xt_u32, xt_sctp: validate user space input - nftables: exthdr: fix 4-byte stack OOB write - nfnetlink_osf: avoid OOB read - one more fix for the garbage collection work from last release - igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU - bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t - handshake: fix null-deref in handshake_nl_done_doit() - ip: ignore dst hint for multipath routes to ensure packets are hashed across the nexthops - phy: micrel: - correct bit assignments for cable test errata - disable EEE according to the KSZ9477 errata Misc: - docs/bpf: document compile-once-run-everywhere (CO-RE) relocations - Revert "net: macsec: preserve ingress frame ordering", it appears to have been developed against an older kernel, problem doesn't exist upstream" * tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits) net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs() Revert "net: team: do not use dynamic lockdep key" net: hns3: remove GSO partial feature bit net: hns3: fix the port information display when sfp is absent net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue net: hns3: fix debugfs concurrency issue between kfree buffer and read net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read() net: hns3: Support query tx timeout threshold by debugfs net: hns3: fix tx timeout issue net: phy: Provide Module 4 KSZ9477 errata (DS80000754C) netfilter: nf_tables: Unbreak audit log reset netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID netfilter: nfnetlink_osf: avoid OOB read netfilter: nftables: exthdr: fix 4-byte stack OOB write selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc bpf: bpf_sk_storage: Fix invalid wait context lockdep report s390/bpf: Pass through tail call counter in trampolines ...
2023-09-04net: ipv6/addrconf: avoid integer underflow in ipv6_create_tempaddrAlex Henrie
The existing code incorrectly casted a negative value (the result of a subtraction) to an unsigned value without checking. For example, if /proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred lifetime would jump to 4 billion seconds. On my machine and network the shortest lifetime that avoided underflow was 3 seconds. Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR") Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-29Merge tag 'sysctl-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "Long ago we set out to remove the kitchen sink on kernel/sysctl.c arrays and placings sysctls to their own sybsystem or file to help avoid merge conflicts. Matthew Wilcox pointed out though that if we're going to do that we might as well also *save* space while at it and try to remove the extra last sysctl entry added at the end of each array, a sentintel, instead of bloating the kernel by adding a new sentinel with each array moved. Doing that was not so trivial, and has required slowing down the moves of kernel/sysctl.c arrays and measuring the impact on size by each new move. The complex part of the effort to help reduce the size of each sysctl is being done by the patient work of el señor Don Joel Granados. A lot of this is truly painful code refactoring and testing and then trying to measure the savings of each move and removing the sentinels. Although Joel already has code which does most of this work, experience with sysctl moves in the past shows is we need to be careful due to the slew of odd build failures that are possible due to the amount of random Kconfig options sysctls use. To that end Joel's work is split by first addressing the major housekeeping needed to remove the sentinels, which is part of this merge request. The rest of the work to actually remove the sentinels will be done later in future kernel releases. The preliminary math is showing this will all help reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array where we are able to remove each sentinel in the future. That also means there is no more bloating the kernel with the extra ~64 bytes per array moved as no new sentinels are created" * tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sysctl: Use ctl_table_size as stopping criteria for list macro sysctl: SIZE_MAX->ARRAY_SIZE in register_net_sysctl vrf: Update to register_net_sysctl_sz networking: Update to register_net_sysctl_sz netfilter: Update to register_net_sysctl_sz ax.25: Update to register_net_sysctl_sz sysctl: Add size to register_net_sysctl function sysctl: Add size arg to __register_sysctl_init sysctl: Add size to register_sysctl sysctl: Add a size arg to __register_sysctl_table sysctl: Add size argument to init_header sysctl: Add ctl_table_size to ctl_table_header sysctl: Use ctl_table_header in list_for_each_table_entry sysctl: Prefer ctl_table_header in proc_sysctl
2023-08-20net: release reference to inet6_dev pointerPatrick Rohr
addrconf_prefix_rcv returned early without releasing the inet6_dev pointer when the PIO lifetime is less than accept_ra_min_lft. Fixes: 5027d54a9c30 ("net: change accept_ra_min_rtr_lft to affect all RA lifetimes") Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: Simon Horman <horms@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Patrick Rohr <prohr@google.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-15networking: Update to register_net_sysctl_szJoel Granados
Move from register_net_sysctl to register_net_sysctl_sz for all the networking related files. Do this while making sure to mirror the NULL assignments with a table_size of zero for the unprivileged users. We need to move to the new function in preparation for when we change SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do so would erroneously allow ARRAY_SIZE() to be called on a pointer. We hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all the relevant net sysctl registering functions to register_net_sysctl_sz in subsequent commits. An additional size function was added to the following files in order to calculate the size of an array that is defined in another file: include/net/ipv6.h net/ipv6/icmp.c net/ipv6/route.c net/ipv6/sysctl_net_ipv6.c Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-07-28net: change accept_ra_min_rtr_lft to affect all RA lifetimesPatrick Rohr
accept_ra_min_rtr_lft only considered the lifetime of the default route and discarded entire RAs accordingly. This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and applies the value to individual RA sections; in particular, router lifetime, PIO preferred lifetime, and RIO lifetime. If any of those lifetimes are lower than the configured value, the specific RA section is ignored. In order for the sysctl to be useful to Android, it should really apply to all lifetimes in the RA, since that is what determines the minimum frequency at which RAs must be processed by the kernel. Android uses hardware offloads to drop RAs for a fraction of the minimum of all lifetimes present in the RA (some networks have very frequent RAs (5s) with high lifetimes (2h)). Despite this, we have encountered networks that set the router lifetime to 30s which results in very frequent CPU wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the WiFi firmware) entirely on such networks, it seems better to ignore the misconfigured routers while still processing RAs from other IPv6 routers on the same network (i.e. to support IoT applications). The previous implementation dropped the entire RA based on router lifetime. This turned out to be hard to expand to the other lifetimes present in the RA in a consistent manner; dropping the entire RA based on RIO/PIO lifetimes would essentially require parsing the whole thing twice. Fixes: 1671bcfd76fd ("net: add sysctl accept_ra_min_rtr_lft") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Patrick Rohr <prohr@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28IPv6: add extack info for IPv6 address add/deleteHangbin Liu
Add extack info for IPv6 address add/delete, which would be useful for users to understand the problem without having to read kernel code. Suggested-by: Beniamino Galvani <bgalvani@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-24ipv6 addrconf: fix bug where deleting a mngtmpaddr can create a new ↵Maciej Żenczykowski
temporary address currently on 6.4 net/main: # ip link add dummy1 type dummy # echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr # ip link set dummy1 up # ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1 # ip -6 addr show dev dummy1 11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic valid_lft 604800sec preferred_lft 86172sec inet6 2000::1/64 scope global mngtmpaddr valid_lft forever preferred_lft forever inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link valid_lft forever preferred_lft forever # ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1 (can wait a few seconds if you want to, the above delete isn't [directly] the problem) # ip -6 addr show dev dummy1 11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet6 2000::1/64 scope global mngtmpaddr valid_lft forever preferred_lft forever inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link valid_lft forever preferred_lft forever # ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1 # ip -6 addr show dev dummy1 11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic valid_lft 604797sec preferred_lft 86169sec inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link valid_lft forever preferred_lft forever This patch prevents this new 'global temporary dynamic' address from being created by the deletion of the related (same subnet prefix) 'mngtmpaddr' (which is triggered by there already being no temporary addresses). Cc: Jiri Pirko <jiri@resnulli.us> Fixes: 53bd67491537 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses") Reported-by: Xiao Ma <xiaom@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230720160022.1887942-1-maze@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-23net: add sysctl accept_ra_min_rtr_lftPatrick Rohr
This change adds a new sysctl accept_ra_min_rtr_lft to specify the minimum acceptable router lifetime in an RA. If the received RA router lifetime is less than the configured value (and not 0), the RA is ignored. This is useful for mobile devices, whose battery life can be impacted by networks that configure RAs with a short lifetime. On such networks, the device should never gain IPv6 provisioning and should attempt to drop RAs via hardware offload, if available. Signed-off-by: Patrick Rohr <prohr@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-09ipv6/addrconf: fix a potential refcount underflow for idevZiyang Xuan
Now in addrconf_mod_rs_timer(), reference idev depends on whether rs_timer is not pending. Then modify rs_timer timeout. There is a time gap in [1], during which if the pending rs_timer becomes not pending. It will miss to hold idev, but the rs_timer is activated. Thus rs_timer callback function addrconf_rs_timer() will be executed and put idev later without holding idev. A refcount underflow issue for idev can be caused by this. if (!timer_pending(&idev->rs_timer)) in6_dev_hold(idev); <--------------[1] mod_timer(&idev->rs_timer, jiffies + when); To fix the issue, hold idev if mod_timer() return 0. Fixes: b7b1bfce0bb6 ("ipv6: split duplicate address detection and router solicitation timer") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-04ipv6: lower "link become ready"'s level messageMatthieu Baerts
This following message is printed in the console each time a network device configured with an IPv6 addresses is ready to be used: ADDRCONF(NETDEV_CHANGE): <iface>: link becomes ready When netns are being extensively used -- e.g. by re-creating netns' with veth to discuss with each others for testing purposes like mptcp_join.sh selftest does -- it generates a lot of messages like that: more than 700 when executing mptcp_join.sh with the latest version. It looks like this message is not that helpful after all: maybe it can be used as a sign to know if there is something wrong, e.g. if a device is being regularly reconfigured by accident? But even then, there are better ways to monitor and diagnose such issues. When looking at commit 3c21edbd1137 ("[IPV6]: Defer IPv6 device initialization until the link becomes ready.") which introduces this new message, it seems it had been added to verify that the new feature was working as expected. It could have then used a lower level than "info" from the beginning but it was fine like that back then: 17 years ago. It seems then OK today to simply lower its level, similar to commit 7c62b8dd5ca8 ("net/ipv6: lower the level of "link is not ready" messages") and as suggested by Mat [1], Stephen and David [2]. Link: https://lore.kernel.org/mptcp/614e76ac-184e-c553-af72-084f792e60b0@kernel.org/T/ [1] Link: https://lore.kernel.org/netdev/68035bad-b53e-91cb-0e4a-007f27d62b05@tessares.net/T/ [2] Suggested-by: Mat Martineau <martineau@kernel.org> Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Suggested-by: David Ahern <dsahern@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-24ipv6: prevent router_solicitations for team portXin Long
The issue fixed for bonding in commit c2edacf80e15 ("bonding / ipv6: no addrconf for slaves separately from master") also exists in team driver. However, we can't just disable ipv6 addrconf for team ports, as 'teamd' will need it when nsns_ping watch is used in the user space. Instead of preventing ipv6 addrconf, this patch only prevents RS packets for team ports, as it did in commit b52e1cce31ca ("ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL"). Note that we do not prevent DAD packets, to avoid the changes getting intricate / hacky. Also, usually sysctl dad_transmits is set to 1 and only 1 DAD packet will be sent, and by now no libteam user complains about DAD packets on team ports, unlike RS packets. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-21neighbour: switch to standard rcu, instead of rcu_bhEric Dumazet
rcu_bh is no longer a win, especially for objects freed with standard call_rcu(). Switch neighbour code to no longer disable BH when not necessary. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-01ip/ip6_gre: Fix non-point-to-point tunnel not generating IPv6 link local addressThomas Winter
We recently found that our non-point-to-point tunnels were not generating any IPv6 link local address and instead generating an IPv6 compat address, breaking IPv6 communication on the tunnel. Previously, addrconf_gre_config always would call addrconf_addr_gen and generate a EUI64 link local address for the tunnel. Then commit e5dd729460ca changed the code path so that add_v4_addrs is called but this only generates a compat IPv6 address for non-point-to-point tunnels. I assume the compat address is specifically for SIT tunnels so have kept that only for SIT - GRE tunnels now always generate link local addresses. Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-01ip/ip6_gre: Fix changing addr gen mode not generating IPv6 link local addressThomas Winter
For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they come up to generate the IPv6 link local address for the interface. Recently we found that they were no longer generating IPv6 addresses. This issue would also have affected SIT tunnels. Commit e5dd729460ca changed the code path so that GRE tunnels generate an IPv6 address based on the tunnel source address. It also changed the code path so GRE tunnels don't call addrconf_addr_gen in addrconf_dev_config which is called by addrconf_sysctl_addr_gen_mode when the IN6_ADDR_GEN_MODE is changed. This patch aims to fix this issue by moving the code in addrconf_notify which calls the addr gen for GRE and SIT into a separate function and calling it in the places that expect the IPv6 address to be generated. The previous addrconf_dev_config is renamed to addrconf_eth_config since it only expected eth type interfaces and follows the addrconf_gre/sit_config format. A part of this changes means that the loopback address will be attempted to be configured when changing addr_gen_mode for lo. This should not be a problem because the address should exist anyway and if does already exist then no error is produced. Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
generated by cgit (git 2.34.1) at 2025-07-15 17:33:56 +0000