summaryrefslogtreecommitdiff
path: root/net/ipv6/udp.c
AgeCommit message (Collapse)Author
2018-05-10net/udp: Update udp_encap_needed static key to modern apiDavidlohr Bueso
No changes in refcount semantics -- key init is false; replace static_key_enable with static_branch_enable static_key_slow_inc|dec with static_branch_inc|dec static_key_false with static_branch_unlikely Added a '_key' suffix to udp and udpv6 encap_needed, for better self documentation. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-01udp: disable gso with no_check_txWillem de Bruijn
Syzbot managed to send a udp gso packet without checksum offload into the gso stack by disabling tx checksum (UDP_NO_CHECK6_TX). This triggered the skb_warn_bad_offload. RIP: 0010:skb_warn_bad_offload+0x2bc/0x600 net/core/dev.c:2658 skb_gso_segment include/linux/netdevice.h:4038 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3120 __dev_queue_xmit+0xbf8/0x34c0 net/core/dev.c:3577 dev_queue_xmit+0x17/0x20 net/core/dev.c:3618 UDP_NO_CHECK6_TX sets skb->ip_summed to CHECKSUM_NONE just after the udp gso integrity checks in udp_(v6_)send_skb. Extend those checks to catch and fail in this case. After the integrity checks jump directly to the CHECKSUM_PARTIAL case to avoid reading the no_check_tx flags again (a TOCTTOU race). Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: add gso segment cmsgWillem de Bruijn
Allow specifying segment size in the send call. The new control message performs the same function as socket option UDP_SEGMENT while avoiding the extra system call. [ Export udp_cmsg_send for ipv6. -DaveM ] Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: generate gso with UDP_SEGMENTWillem de Bruijn
Support generic segmentation offload for udp datagrams. Callers can concatenate and send at once the payload of multiple datagrams with the same destination. To set segment size, the caller sets socket option UDP_SEGMENT to the length of each discrete payload. This value must be smaller than or equal to the relevant MTU. A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a per send call basis. Total byte length may then exceed MTU. If not an exact multiple of segment size, the last segment will be shorter. The implementation adds a gso_size field to the udp socket, ip(v6) cmsg cookie and inet_cork structure to be able to set the value at setsockopt or cmsg time and to work with both lockless and corked paths. Initial benchmark numbers show UDP GSO about as expensive as TCP GSO. tcp tso 3197 MB/s 54232 msg/s 54232 calls/s 6,457,754,262 cycles tcp gso 1765 MB/s 29939 msg/s 29939 calls/s 11,203,021,806 cycles tcp without tso/gso * 739 MB/s 12548 msg/s 12548 calls/s 11,205,483,630 cycles udp 876 MB/s 14873 msg/s 624666 calls/s 11,205,777,429 cycles udp gso 2139 MB/s 36282 msg/s 36282 calls/s 11,204,374,561 cycles [*] after reverting commit 0a6b2a1dc2a2 ("tcp: switch to GSO being always on") Measured total system cycles ('-a') for one core while pinning both the network receive path and benchmark process to that core: perf stat -a -C 12 -e cycles \ ./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4 Note the reduction in calls/s with GSO. Bytes per syscall drops increases from 1470 to 61818. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26udp: expose inet cork to udpWillem de Bruijn
UDP segmentation offload needs access to inet_cork in the udp layer. Pass the struct to ip(6)_make_skb instead of allocating it on the stack in that function itself. This patch is a noop otherwise. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04ipv6: udp: set dst cache for a connected sk if current not validAlexey Kodanev
A new RTF_CACHE route can be created between ip6_sk_dst_lookup_flow() and ip6_dst_store() calls in udpv6_sendmsg(), when datagram sending results to ICMPV6_PKT_TOOBIG error: udp_v6_send_skb(), for example with vti6 tunnel: vti6_xmit(), get ICMPV6_PKT_TOOBIG error skb_dst_update_pmtu(), can create a RTF_CACHE clone icmpv6_send() ... udpv6_err() ip6_sk_update_pmtu() ip6_update_pmtu(), can create a RTF_CACHE clone ... ip6_datagram_dst_update() ip6_dst_store() And after commit 33c162a980fe ("ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update"), the UDPv6 error handler can update socket's dst cache, but it can happen before the update in the end of udpv6_sendmsg(), preventing getting the new dst cache on the next udpv6_sendmsg() calls. In order to fix it, save dst in a connected socket only if the current socket's dst cache is invalid. The previous patch prepared ip6_sk_dst_lookup_flow() to do that with the new argument, and this patch enables it in udpv6_sendmsg(). Fixes: 33c162a980fe ("ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update") Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04ipv6: udp: convert 'connected' to bool type in udpv6_sendmsg()Alexey Kodanev
This should make it consistent with ip6_sk_dst_lookup_flow() that is accepting the new 'connected' parameter of type bool. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow()Alexey Kodanev
Add 'connected' parameter to ip6_sk_dst_lookup_flow() and update the cache only if ip6_sk_dst_check() returns NULL and a socket is connected. The function is used as before, the new behavior for UDP sockets in udpv6_sendmsg() will be enabled in the next patch. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31bpf: Hooks for sys_connectAndrey Ignatov
== The problem == See description of the problem in the initial patch of this patch set. == The solution == The patch provides much more reliable in-kernel solution for the 2nd part of the problem: making outgoing connecttion from desired IP. It adds new attach types `BPF_CGROUP_INET4_CONNECT` and `BPF_CGROUP_INET6_CONNECT` for program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that can be used to override both source and destination of a connection at connect(2) time. Local end of connection can be bound to desired IP using newly introduced BPF-helper `bpf_bind()`. It allows to bind to only IP though, and doesn't support binding to port, i.e. leverages `IP_BIND_ADDRESS_NO_PORT` socket option. There are two reasons for this: * looking for a free port is expensive and can affect performance significantly; * there is no use-case for port. As for remote end (`struct sockaddr *` passed by user), both parts of it can be overridden, remote IP and remote port. It's useful if an application inside cgroup wants to connect to another application inside same cgroup or to itself, but knows nothing about IP assigned to the cgroup. Support is added for IPv4 and IPv6, for TCP and UDP. IPv4 and IPv6 have separate attach types for same reason as sys_bind hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. == Implementation notes == The patch introduces new field in `struct proto`: `pre_connect` that is a pointer to a function with same signature as `connect` but is called before it. The reason is in some cases BPF hooks should be called way before control is passed to `sk->sk_prot->connect`. Specifically `inet_dgram_connect` autobinds socket before calling `sk->sk_prot->connect` and there is no way to call `bpf_bind()` from hooks from e.g. `ip4_datagram_connect` or `ip6_datagram_connect` since it'd cause double-bind. On the other hand `proto.pre_connect` provides a flexible way to add BPF hooks for connect only for necessary `proto` and call them at desired time before `connect`. Since `bpf_bind()` is allowed to bind only to IP and autobind in `inet_dgram_connect` binds only port there is no chance of double-bind. bpf_bind() sets `force_bind_address_no_port` to bind to only IP despite of value of `bind_address_no_port` socket field. bpf_bind() sets `with_lock` to `false` when calling to __inet_bind() and __inet6_bind() since all call-sites, where bpf_bind() is called, already hold socket lock. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-16udp: Move the udp sysctl to namespace.Tonghao Zhang
This patch moves the udp_rmem_min, udp_wmem_min to namespace and init the udp_l3mdev_accept explicitly. The udp_rmem_min/udp_wmem_min affect udp rx/tx queue, with this patch namespaces can set them differently. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: delete /proc THIS_MODULE referencesAlexey Dobriyan
/proc has been ignoring struct file_operations::owner field for 10 years. Specifically, it started with commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where inode->i_fop is initialized with proxy struct file_operations for regular files: - if (de->proc_fops) - inode->i_fop = de->proc_fops; + if (de->proc_fops) { + if (S_ISREG(inode->i_mode)) + inode->i_fop = &proc_reg_file_ops; + else + inode->i_fop = de->proc_fops; + } VFS stopped pinning module at this point. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-03udp: Move udp[46]_portaddr_hash() to net/ip[v6].hMartin KaFai Lau
This patch moves the udp[46]_portaddr_hash() to net/ip[v6].h. The function name is renamed to ipv[46]_portaddr_hash(). It will be used by a later patch which adds a second listener hashtable hashed by the address and port. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30net/reuseport: drop legacy codePaolo Abeni
Since commit e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") and commit c125e80b8868 ("soreuseport: fast reuseport TCP socket selection") the relevant reuseport socket matching the current packet is selected by the reuseport_select_sock() call. The only exceptions are invalid BPF filters/filters returning out-of-range indices. In the latter case the code implicitly falls back to using the hash demultiplexing, but instead of selecting the socket inside the reuseport_select_sock() function, it relies on the hash selection logic introduced with the early soreuseport implementation. With this patch, in case of a BPF filter returning a bad socket index value, we fall back to hash-based selection inside the reuseport_select_sock() body, so that we can drop some duplicate code in the ipv4 and ipv6 stack. This also allows faster lookup in the above scenario and will allow us to avoid computing the hash value for successful, BPF based demultiplexing - in a later patch. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-18udpv6: Fix the checksum computation when HW checksum does not applySubash Abhinov Kasiviswanathan
While trying an ESP transport mode encryption for UDPv6 packets of datagram size 1436 with MTU 1500, checksum error was observed in the secondary fragment. This error occurs due to the UDP payload checksum being missed out when computing the full checksum for these packets in udp6_hwcsum_outgoing(). Fixes: d39d938c8228 ("ipv6: Introduce udpv6_send_skb()") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-09-04Merge branch 'linus' into locking/core, to fix up conflictsIngo Molnar
Conflicts: mm/page_alloc.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28net: Add comment that early_demux can change via sysctlDavid Ahern
Twice patches trying to constify inet{6}_protocol have been reverted: 39294c3df2a8 ("Revert "ipv6: constify inet6_protocol structures"") to revert 3a3a4e3054137 and then 03157937fe0b5 ("Revert "ipv4: make net_protocol const"") to revert aa8db499ea67. Add a comment that the structures can not be const because the early_demux field can change based on a sysctl. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25udp6: set rx_dst_cookie on rx_dst updatesPaolo Abeni
Currently, in the udp6 code, the dst cookie is not initialized/updated concurrently with the RX dst used by early demux. As a result, the dst_check() in the early_demux path always fails, the rx dst cache is always invalidated, and we can't really leverage significant gain from the demux lookup. Fix it adding udp6 specific variant of sk_rx_dst_set() and use it to set the dst cookie when the dst entry is really changed. The issue is there since the introduction of early demux for ipv6. Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast") Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-08-18datagram: When peeking datagrams with offset < 0 don't skip empty skbsMatthew Dawson
Due to commit e6afc8ace6dd5cef5e812f26c72579da8806f5ac ("udp: remove headers from UDP packets before queueing"), when udp packets are being peeked the requested extra offset is always 0 as there is no need to skip the udp header. However, when the offset is 0 and the next skb is of length 0, it is only returned once. The behaviour can be seen with the following python script: from socket import *; f=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0); g=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0); f.bind(('::', 0)); addr=('::1', f.getsockname()[1]); g.sendto(b'', addr) g.sendto(b'b', addr) print(f.recvfrom(10, MSG_PEEK)); print(f.recvfrom(10, MSG_PEEK)); Where the expected output should be the empty string twice. Instead, make sk_peek_offset return negative values, and pass those values to __skb_try_recv_datagram/__skb_try_recv_from_queue. If the passed offset to __skb_try_recv_from_queue is negative, the checked skb is never skipped. __skb_try_recv_from_queue will then ensure the offset is reset back to 0 if a peek is requested without an offset, unless no packets are found. Also simplify the if condition in __skb_try_recv_from_queue. If _off is greater then 0, and off is greater then or equal to skb->len, then (_off || skb->len) must always be true assuming skb->len >= 0 is always true. Also remove a redundant check around a call to sk_peek_offset in af_unix.c, as it double checked if MSG_PEEK was set in the flags. V2: - Moved the negative fixup into __skb_try_recv_from_queue, and remove now redundant checks - Fix peeking in udp{,v6}_recvmsg to report the right value when the offset is 0 V3: - Marked new branch in __skb_try_recv_from_queue as unlikely. Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10jump_label: Do not use unserialized static_key_enabled()Paolo Bonzini
Any use of key->enabled (that is static_key_enabled and static_key_count) outside jump_label_lock should handle its own serialization. The only two that are not doing so are the UDP encapsulation static keys. Change them to use static_key_enable, which now correctly tests key->enabled under the jump label lock. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1501601046-35683-3-git-send-email-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-07net: ipv6: add second dif to inet6 socket lookupsDavid Ahern
Add a second device index, sdif, to inet6 socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. TCP moves the data in the cb. Prior to tcp_v4_rcv (e.g., early demux) the ingress index is obtained from IPCB using inet_sdif and after tcp_v4_rcv tcp_v4_sdif is used. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07net: ipv6: add second dif to udp socket lookupsDavid Ahern
Add a second device index, sdif, to udp socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Early demux lookups are handled in the next patch as part of INET_MATCH changes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31udp6: fix jumbogram receptionPaolo Abeni
Since commit 67a51780aebb ("ipv6: udp: leverage scratch area helpers") udp6_recvmsg() read the skb len from the scratch area, to avoid a cache miss. But the UDP6 rx path support RFC 2675 UDPv6 jumbograms, and their length exceeds the 16 bits available in the scratch area. As a side effect the length returned by recvmsg() is: <ingress datagram len> % (1<<16) This commit addresses the issue allocating one more bit in the IP6CB flags field and setting it for incoming jumbograms. Such field is still in the first cacheline, so at recvmsg() time we can check it and fallback to access skb->len if required, without a measurable overhead. Fixes: 67a51780aebb ("ipv6: udp: leverage scratch area helpers") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29udp6: fix socket leak on early demuxPaolo Abeni
When an early demuxed packet reaches __udp6_lib_lookup_skb(), the sk reference is retrieved and used, but the relevant reference count is leaked and the socket destructor is never called. Beyond leaking the sk memory, if there are pending UDP packets in the receive queue, even the related accounted memory is leaked. In the long run, this will cause persistent forward allocation errors and no UDP skbs (both ipv4 and ipv6) will be able to reach the user-space. Fix this by explicitly accessing the early demux reference before the lookup, and properly decreasing the socket reference count after usage. Also drop the skb_steal_sock() in __udp6_lib_lookup_skb(), and the now obsoleted comment about "socket cache". The newly added code is derived from the current ipv4 code for the similar path. v1 -> v2: fixed the __udp6_lib_rcv() return code for resubmission, as suggested by Eric Reported-by: Sam Edwards <CFSworks@gmail.com> Reported-by: Marc Haber <mh+netdev@zugschlus.de> Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sock.sk_refcnt from atomic_t to refcount_tReshetova, Elena
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This patch uses refcount_inc_not_zero() instead of atomic_inc_not_zero_hint() due to absense of a _hint() version of refcount API. If the hint() version must be used, we might need to revisit API. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
A set of overlapping changes in macvlan and the rocker driver, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27ipv6: udp: leverage scratch area helpersPaolo Abeni
The commit b65ac44674dd ("udp: try to avoid 2 cache miss on dequeue") leveraged the scratched area helpers for UDP v4 but I forgot to update accordingly the IPv6 code path. This change extends the scratch area usage to the IPv6 code, synching the two implementations and giving some performance benefit. IPv6 is again almost on the same level of IPv4, performance-wide. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25net: ipv6: reset daddr and dport in sk if connect() failsWei Wang
In __ip6_datagram_connect(), reset sk->sk_v6_daddr and inet->dport if error occurs. In udp_v6_early_demux(), check for sk_state to make sure it is in TCP_ESTABLISHED state. Together, it makes sure unconnected UDP socket won't be considered as a valid candidate for early demux. v3: add TCP_ESTABLISHED state check in udp_v6_early_demux() v2: fix compilation error Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-22udp/v6: prefetch rmem_alloc in udp6_queue_rcv_skb()Paolo Abeni
very similar to commit dd99e425be23 ("udp: prefetch rmem_alloc in udp_queue_rcv_skb()"), this allows saving a cache miss when the BH is bottle-neck for UDP over ipv6 packet processing, e.g. for small packets when a single RX NIC ingress queue is in use. Performances under flood when multiple NIC RX queues used are unaffected, but when a single NIC rx queue is in use, this gives ~8% performance improvement. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17udp: call dst_hold_safe() in udp_sk_rx_set_dst()Wei Wang
In udp_v4/6_early_demux() code, we try to hold dst->__refcnt for dst with DST_NOCACHE flag. This is because later in udp_sk_rx_dst_set() function, we will try to cache this dst in sk for connected case. However, a better way to achieve this is to not try to hold dst in early_demux(), but in udp_sk_rx_dst_set(), call dst_hold_safe(). This approach is also more consistant with how tcp is handling it. And it will make later changes simpler. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-05-18udp: make *udp*_queue_rcv_skb() functions staticPaolo Abeni
Since the udp memory accounting refactor, we don't need any more to export the *udp*_queue_rcv_skb(). Make them static and fix a couple of sparse warnings: net/ipv4/udp.c:1615:5: warning: symbol 'udp_queue_rcv_skb' was not declared. Should it be static? net/ipv6/udp.c:572:5: warning: symbol 'udpv6_queue_rcv_skb' was not declared. Should it be static? Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema") Fixes: c915fe13cbaa ("udplite: fix NULL pointer dereference") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16udp: use a separate rx queue for packet receptionPaolo Abeni
under udp flood the sk_receive_queue spinlock is heavily contended. This patch try to reduce the contention on such lock adding a second receive queue to the udp sockets; recvmsg() looks first in such queue and, only if empty, tries to fetch the data from sk_receive_queue. The latter is spliced into the newly added queue every time the receive path has to acquire the sk_receive_queue lock. The accounting of forward allocated memory is still protected with the sk_receive_queue lock, so udp_rmem_release() needs to acquire both locks when the forward deficit is flushed. On specific scenarios we can end up acquiring and releasing the sk_receive_queue lock multiple times; that will be covered by the next patch Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: ipv6: Fix UDP early demux lookup with udp_l3mdev_accept=0subashab@codeaurora.org
David Ahern reported that 5425077d73e0c ("net: ipv6: Add early demux handler for UDP unicast") breaks udp_l3mdev_accept=0 since early demux for IPv6 UDP was doing a generic socket lookup which does not require an exact match. Fix this by making UDPv6 early demux match connected sockets only. v1->v2: Take reference to socket after match as suggested by Eric v2->v3: Add comment before break Fixes: 5425077d73e0c ("net: ipv6: Add early demux handler for UDP unicast") Reported-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Eric Dumazet <edumazet@google.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: Add sysctl to toggle early demux for tcp and udpsubashab@codeaurora.org
Certain system process significant unconnected UDP workload. It would be preferrable to disable UDP early demux for those systems and enable it for TCP only. By disabling UDP demux, we see these slight gains on an ARM64 system- 782 -> 788Mbps unconnected single stream UDPv4 633 -> 654Mbps unconnected UDPv4 different sources The performance impact can change based on CPU architecure and cache sizes. There will not much difference seen if entire UDP hash table is in cache. Both sysctls are enabled by default to preserve existing behavior. v1->v2: Change function pointer instead of adding conditional as suggested by Stephen. v2->v3: Read once in callers to avoid issues due to compiler optimizations. Also update commit message with the tests. v3->v4: Store and use read once result instead of querying pointer again incorrectly. v4->v5: Refactor to avoid errors due to compilation with IPV6={m,n} Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Suggested-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Tom Herbert <tom@herbertland.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/genet/bcmmii.c drivers/net/hyperv/netvsc.c kernel/bpf/hashtab.c Almost entirely overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22ipv6: make sure to initialize sockc.tsflags before first useAlexander Potapenko
In the case udp_sk(sk)->pending is AF_INET6, udpv6_sendmsg() would jump to do_append_data, skipping the initialization of sockc.tsflags. Fix the problem by moving sockc.tsflags initialization earlier. The bug was detected with KMSAN. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: ipv6: Add early demux handler for UDP unicastsubashab@codeaurora.org
While running a single stream UDPv6 test, we observed that amount of CPU spent in NET_RX softirq was much greater than UDPv4 for an equivalent receive rate. The test here was run on an ARM64 based Android system. On further analysis with perf, we found that UDPv6 was spending significant time in the statistics netfilter targets which did socket lookup per packet. These statistics rules perform a lookup when there is no socket associated with the skb. Since there are multiple instances of these rules based on UID, there will be equal number of lookups per skb. By introducing early demux for UDPv6, we avoid the redundant lookups. This also helped to improve the performance (800Mbps -> 870Mbps) on a CPU limited system in a single stream UDPv6 receive test with 1450 byte sized datagrams using iperf. v1->v2: Use IPv6 cookie to validate dst instead of 0 as suggested by Eric Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-02-14ipv6: Handle IPv4-mapped src to in6addr_any dst.Jonathan T. Leighton
This patch adds a check on the type of the source address for the case where the destination address is in6addr_any. If the source is an IPv4-mapped IPv6 source address, the destination is changed to ::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This is done in three locations to handle UDP calls to either connect() or sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays handling an in6addr_any destination until very late, so the patch only needs to handle the case where the source is an IPv4-mapped IPv6 address. Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflict was an interaction between a bug fix in the netvsc driver in 'net' and an optimization of the RX path in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: use dst_confirm_neigh for UDP, RAW, ICMP, L2TPJulian Anastasov
When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. The datagram protocols can use MSG_CONFIRM to confirm the neighbour. When used with MSG_PROBE we do not reach the code where neighbour is confirmed, so we have to do the same slow lookup by using the dst_confirm_neigh() helper. When MSG_PROBE is not used, ip_append_data/ip6_append_data will set the skb flag dst_pending_confirm. Reported-by: YueHaibing <yuehaibing@huawei.com> Fixes: 5110effee8fd ("net: Do delayed neigh confirmation.") Fixes: f2bb4bedf35d ("ipv4: Cache output routes in fib_info nexthops.") Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07udp: properly cope with csum errorsEric Dumazet
Dmitry reported that UDP sockets being destroyed would trigger the WARN_ON(atomic_read(&sk->sk_rmem_alloc)); in inet_sock_destruct() It turns out we do not properly destroy skb(s) that have wrong UDP checksum. Thanks again to syzkaller team. Fixes : 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: Avoid receiving packets with an l3mdev on unbound UDP socketsRobert Shearman
Packets arriving in a VRF currently are delivered to UDP sockets that aren't bound to any interface. TCP defaults to not delivering packets arriving in a VRF to unbound sockets. IP route lookup and socket transmit both assume that unbound means using the default table and UDP applications that haven't been changed to be aware of VRFs may not function correctly in this case since they may not be able to handle overlapping IP address ranges, or be able to send packets back to the original sender if required. So add a sysctl, udp_l3mdev_accept, to control this behaviour with it being analgous to the existing tcp_l3mdev_accept, namely to allow a process to have a VRF-global listen socket. Have this default to off as this is the behaviour that users will expect, given that there is no explicit mechanism to set unmodified VRF-unaware application into a default VRF. Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18inet: collapse ipv4/v6 rcv_saddr_equal functions into oneJosef Bacik
We pass these per-protocol equal functions around in various places, but we can just have one function that checks the sk->sk_family and then do the right comparison function. I've also changed the ipv4 version to not cast to inet_sock since it is unneeded. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-07-16 10:09:04 +0000