summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2023-09-13wifi: mac80211: fixes in FILS discovery updatesAloka Dixit
FILS discovery configuration gets updated only if the maximum interval is set to a non-zero value, hence there is no way to reset this value to 0 once set. Replace the check for interval with a new flag which is set only if the configuration should be updated. Add similar changes for the unsolicited broadcast probe response handling. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230727174100.11721-3-quic_alokad@quicinc.com [move NULL'ing to else branch to not have intermediate NULL visible] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: mac80211: remove shifted rate supportJohannes Berg
We really cannot even get into this as we can't have a BSS with a 5/10 MHz (scan) width, and therefore all the code handling shifted rates cannot happen. Remove it all, since it's broken anyway, at least with MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: cfg80211: remove scan_width supportJohannes Berg
There really isn't any support for scanning at different channel widths than 20 MHz since there's no way to set it. Remove this support for now, if somebody wants to maintain this whole thing later we can revisit how it should work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: mac80211: fix mesh id corruption on 32 bit systemsFelix Fietkau
Since the changed field size was increased to u64, mesh_bss_info_changed pulls invalid bits from the first 3 bytes of the mesh id, clears them, and passes them on to ieee80211_link_info_change_notify, because ifmsh->mbss_changed was not updated to match its size. Fix this by turning into ifmsh->mbss_changed into an unsigned long array with 64 bit size. Fixes: 15ddba5f4311 ("wifi: mac80211: consistently use u64 for BSS changes") Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230913050134.53536-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: fix channel switch link dataJohannes Berg
Use the correct link ID and per-link puncturing data instead of hardcoding link ID 0 and using deflink puncturing. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.0b6a211c8e75.I5724d32bb2dae440888efbc47334d8c115db9d50@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: Do not force off-channel for management Tx with MLOIlan Peer
When user space transmits a management frame it is expected to use the MLD addresses if the connection is an MLD one. Thus, in case the management Tx is using the MLD address and no channel is configured off-channel should not be used (as one of the active links would be used). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.73c8efce252f.Ie4b0a842debb24ef25c5e6cb2ad69b9f46bc4b2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: take MBSSID/EHT data also from probe respJohannes Berg
The code that sets up the assoc link will currently take the BSS element data from the beacon only. This is correct for some of the data, notably the timing and the "have_beacon", but all the data about MBSSID and EHT really doesn't need to be taken from there, and if the EHT puncturing is misconfigured on the AP but we didn't receive a beacon yet, this causes us to connect but immediately disconnect upon receiving the first beacon, rather than connecting without EHT in the first place. Change the code to take MBSSID and EHT data also from the probe response, for a better picture of what the BSS capabilities are and to avoid that EHT puncturing problem. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.3c7e52d49482.Iba6b672f6dc74b45bba26bc497e953e27da43ef9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: Print local link address during authenticationIlan Peer
To ease debugging, mostly in cases that authentication fails. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.9c08605e2691.I0032e9d6e01325862189e4a20b02ddbe8f2f5e75@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: fix # of MSDU in A-MSDU calculationJohannes Berg
During my refactoring I wanted to get rid of the switch, but replaced it with the wrong calculation. Fix that. Fixes: 175ad2ec89fe ("wifi: mac80211: limit A-MSDU subframes for client too") Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.51bf1b8b0adb.Iffbd337fdad2b86ae12f5a39c69fb82b517f7486@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: fix various kernel-doc issuesJohannes Berg
There are various kernel-doc issues here, fix them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.7ce9761f9ebb.I0f44e76c518f72135cc855c809bfa7a5e977b894@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: remove unnecessary struct forward declarationJohannes Berg
This just causes kernel-doc to complain at this spot, but isn't actually needed anyway, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.33a5591dfdeb.If4e7e1a1cb4c04f0afd83db7401c780404dca699@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: add more warnings about inserting sta infoBenjamin Berg
The sta info needs to be inserted before its links may be modified. Add a few warnings to prevent accidental usage of these functions. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.eeb43b3cc9e3.I5fd8236f70e64bf6268f33c883f7a878d963b83e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: add ieee80211_fragment_element to public APIBenjamin Berg
This function will be used by the kunit tests within cfg80211. As it is generally useful, move it from mac80211 to cfg80211. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.5af9391659f5.Ie534ed6591ba02be8572d4d7242394f29e3af04b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: add an element parsing unit testJohannes Berg
Add a unit test for the parsing of a fragmented sta profile sub-element inside a fragmented multi-link element. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.333bc75df13f.I0ddfeb6a88a4d89e7c7850e8ef45a4b19b5a061a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: add support for mld in ieee80211_chswitch_doneEmmanuel Grumbach
This allows to finalize the CSA per link. In case the switch didn't work, tear down the MLD connection. Also pass the ieee80211_bss_conf to post_channel_switch to let the driver know which link completed the switch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211/mac80211: hold link BSSes when assoc fails for MLO connectionWen Gong
When connect to MLO AP with more than one link, and the assoc response of AP is not success, then cfg80211_unhold_bss() is not called for all the links' cfg80211_bss except the primary link which means the link used by the latest successful association request. Thus the hold value of the cfg80211_bss is not reset to 0 after the assoc fail, and then the __cfg80211_unlink_bss() will not be called for the cfg80211_bss by __cfg80211_bss_expire(). Then the AP always looks exist even the AP is shutdown or reconfigured to another type, then it will lead error while connecting it again. The detail info are as below. When connect with muti-links AP, cfg80211_hold_bss() is called by cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When assoc response from AP is not success(such as status_code==1), the ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL because ieee80211_assoc_success()->ieee80211_vif_update_links() is not called for the links. Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and struct cfg80211_connect_resp_params cr in __cfg80211_connect_result() will only have the data of the primary link, and finally function cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss() for the primary link. Then cfg80211_bss of the other links will never free because its hold is always > 0 now. Hence assign value for the bss and status from assoc_data since it is valid for this case. Also assign value of addr from assoc_data when the link is NULL because the addrs of assoc_data and link both represent the local link addr and they are same value for success connection. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: fix RCU usage warning in mesh fast-xmitJohannes Berg
In mesh_fast_tx_flush_addr() we already hold the lock, so don't need additional hashtable RCU protection. Use the rhashtable_lookup_fast() variant to avoid RCU protection warnings. Fixes: d5edb9ae8d56 ("wifi: mac80211: mesh fast xmit support") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: annotate iftype_data pointer with sparseJohannes Berg
There were are a number of cases in mac80211 and iwlwifi (at least) that used the sband->iftype_data pointer directly, instead of using the accessors to find the right array entry to use. Make sparse warn when such a thing is done. To not have a lot of casts, add two helper functions/macros - ieee80211_set_sband_iftype_data() - for_each_sband_iftype_data() Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: fix BA session teardown raceJohannes Berg
As previously reported by Alexander, whose commit 69403bad97aa ("wifi: mac80211: sdata can be NULL during AMPDU start") I'm reverting as part of this commit, there's a race between station destruction and aggregation setup, where the aggregation setup can happen while the station is being removed and queue the work after ieee80211_sta_tear_down_BA_sessions() has already run in __sta_info_destroy_part1(), and thus the worker will run with a now freed station. In his case, this manifested in a NULL sdata pointer, but really there's no guarantee whatsoever. The real issue seems to be that it's possible at all to have a situation where this occurs - we want to stop the BA sessions when doing _part1, but we cannot be sure, and WLAN_STA_BLOCK_BA isn't necessarily effective since we don't know that the setup isn't concurrently running and already got past the check. Simply call ieee80211_sta_tear_down_BA_sessions() again in the second part of station destruction, since at that point really nothing else can hold a reference to the station any more. Also revert the sdata checks since those are just misleading at this point. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: fix TXQ error path and cleanupJohannes Berg
We currently call ieee80211_txq_teardown_flows() as part of ieee80211_remove_interfaces(), but that's not really right in case of HW registration failures, specifically rate control. Call it separately to fix that issue. Reported-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: remove wdev mutexJohannes Berg
Since we're now protecting everything with the wiphy mutex (and were really using it for almost everything before), there's no longer any real reason to have a separate wdev mutex. It may feel better, but really has no value. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: set wiphy for virtual monitorsJohannes Berg
Drivers might plausibly want to have this, but also the locking assertions will need it later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: reduce iflist_mtxJohannes Berg
We now hold the wiphy mutex everywhere that we use or needed the iflist_mtx, so we don't need this mutex any more in mac80211. However, drivers may also iterate, and in some cases (e.g. mt76) do so from high-priority contexts. Thus, keep the mutex around but remove its usage in mac80211 apart from those driver-visible parts that are still needed. Most of this change was done automatically with spatch, with the parts that are still needed as described above reverted manually. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: remove local->mtxJohannes Berg
We now hold the wiphy mutex everywhere that we use or needed the local->mtx, so we don't need this mutex any more. Remove it. Most of this change was done automatically with spatch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: remove ampdu_mlme.mtxJohannes Berg
We now hold the wiphy mutex everywhere that we use or needed the A-MPDU locking, so we don't need this mutex any more. Remove it. Most of this change was done automatically with spatch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: remove chanctx_mtxJohannes Berg
We now hold the wiphy mutex everywhere that we use or needed the chanctx_mtx, so we don't need this mutex any more. Remove it. Most of this change was done automatically with spatch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: remove key_mtxJohannes Berg
We now hold the wiphy mutex everywhere that we use or needed the key_mtx, so we don't need this mutex any more. Remove it. Most of this change was done automatically with spatch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: remove sta_mtxJohannes Berg
We now hold the wiphy mutex everywhere that we use or needed the sta_mtx, so we don't need this mutex any more. Remove it. Most of this change was done automatically with spatch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: take wiphy lock for MAC addr changeJohannes Berg
We want to ensure everything holds the wiphy lock, so also extend that to the MAC change callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: extend wiphy lock in interface removalJohannes Berg
We want to extend the wiphy locking to the interface list, so move that into the section locked with the wiphy lock. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: hold wiphy_lock around concurrency checksJohannes Berg
We want to replace the locking in mac80211 by just the wiphy mutex, so hold the lock here around concurrency checks for the future where the chanctx_mtx used inside goes away. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: ethtool: hold wiphy mutexJohannes Berg
We should hold the wiphy mutex here since we're going to call the driver and want to remove the sta_mtx. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: check wiphy mutex in opsJohannes Berg
Check that we hold the wiphy mutex in the ops when calling the driver, since we're now on our way to always hold it, and simplify the locking. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move color change finalize to wiphy workJohannes Berg
Again this should be per link and will get cancellation issues, move it to a wiphy work. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move CSA finalize to wiphy workJohannes Berg
This work should be made per link as well, and then will have cancellation issues. Moving it to a wiphy work already fixes those beforehand. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move filter reconfig to wiphy workJohannes Berg
This again is intended for future cleanups that are possible when mac80211 and drivers can assume the wiphy is locked. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move tspec work to wiphy workJohannes Berg
One more work that will now execute with the wiphy locked, for future cleanups. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move key tailroom work to wiphy workJohannes Berg
This way we hold the wiphy mutex there, as a step towards removing some of the additional locks we have. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move TDLS work to wiphy workJohannes Berg
Again, to have the wiphy locked for it. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move sched-scan stop work to wiphy workJohannes Berg
This also has the wiphy locked here then. We need to use the _locked version of cfg80211_sched_scan_stopped() now, which also fixes an old deadlock there. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move dynamic PS to wiphy workJohannes Berg
Along with everything else, move the dynamic PS work to be a wiphy work, to simplify locking later. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move link activation work to wiphy workJohannes Berg
We want to have the wiphy locked for these as well, so move it to be a wiphy work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move offchannel works to wiphy workJohannes Berg
Make the offchannel works wiphy works to have the wiphy locked for executing them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: lock wiphy in IP address notifierJohannes Berg
Lock the wiphy in the IP address notifier as another place that should have it locked before calling into the driver. This needs a bit of attention since the notifier can be called while the wiphy is already locked, when we remove an interface. Handle this by not running the notifier in this case, and instead calling out to the driver directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move monitor work to wiphy workJohannes Berg
Again this serves to simplify the locking in mac80211 in the future, since this is a relatively complex work. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move scan work to wiphy workJohannes Berg
Move the scan work to wiphy work, which also simplifies the way we handle the work vs. the scan configuration. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move radar detect work to wiphy workJohannes Berg
Move the radar detect work to wiphy work in order to lock the wiphy for it without doing it manually. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move DFS CAC work to wiphy workJohannes Berg
Move the DFS CAC work over to hold the wiphy lock there without worry about work cancellation. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: add more ops assertionsJohannes Berg
Add more might_sleep() checks and check sdata-in-driver for one additional place. type=feature ticket=jira:WIFI-314309 Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: convert A-MPDU work to wiphy workJohannes Berg
Convert the A-MPDU work to wiphy work so it holds the wiphy mutex and we can later guarantee that to drivers. It might seem that we could run these concurrently for different stations, but they're all on the ordered mac80211 workqueue, so this shouldn't matter for that. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-07-18 17:53:10 +0000