| Age | Commit message (Collapse) | Author |
|---|
|
Add support for tunneling user (inner) packets that are larger than the
tunnel's path MTU (outer) using IP-TFS fragmentation.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When possible rather than appending secondary (aggregated) inner packets
to the fragment list, share their page fragments with the outer IPTFS
packet. This allows for more efficient packet transmission.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add tunnel packet output functionality. This is code handles
the ingress to the tunnel.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add a new xfrm mode implementing AggFrag/IP-TFS from RFC9347.
This utilizes the new xfrm_mode_cbs to implement demand-driven IP-TFS
functionality. This functionality can be used to increase bandwidth
utilization through small packet aggregation, as well as help solve PMTU
issues through it's efficient use of fragmentation.
Link: https://www.rfc-editor.org/rfc/rfc9347.txt
Multiple commits follow to build the functionality into xfrm_iptfs.c
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Define `XFRM_MODE_IPTFS` and `IPSEC_MODE_IPTFS` constants, and add these to
switch case and conditionals adjacent with the existing TUNNEL modes.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add a set of callbacks xfrm_mode_cbs to xfrm_state. These callbacks
enable the addition of new xfrm modes, such as IP-TFS to be defined
in modules.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add netlink options for configuring IP-TFS SAs.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add new Kconfig option to enable IP-TFS (RFC9347) functionality.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch.
Reported-by: syzbot+5f9f31cb7d985f584d8e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CACT4Y+azwfrE3uz6A5ZErov5YN2LYBN5KrsymBerT36VU8qzBA@mail.gmail.com/
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: c2f672fc9464 ("xfrm: state lookup can be lockless")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
UDP send path suffers from one indirect call to ip_generic_getfrag()
We can use INDIRECT_CALL_1() to avoid it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241203173617.2595451-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netpoll_send_udp can return if send was successful.
It will allow client code to be aware of the send status.
Possible return values are the result of __netpoll_send_skb (cast to int)
and -ENOMEM. This doesn't cover the case when TX was not successful
instantaneously and was scheduled for later, __netpoll__send_skb returns
success in that case.
Signed-off-by: Maksym Kutsevol <max@kutsevol.com>
Link: https://patch.msgid.link/20241202-netcons-add-udp-send-fail-statistics-to-netconsole-v5-1-70e82239f922@kutsevol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. The commit
6699170376ab ("ethtool: fix application of verbose no_mask bitset") fixes
this issue by clearing the whole target bitmap before we start iterating.
The solution proposed brought an issue with the behavior of the mod
variable. As the bitset is always cleared the old value will always
differ to the new value.
Fix it by adding a new function to compare bitmaps and a temporary variable
which save the state of the old bitmap.
Fixes: 6699170376ab ("ethtool: fix application of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20241202153358.1142095-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric reported a syzkaller-triggered splat caused by recent ipmr changes:
WARNING: CPU: 2 PID: 6041 at net/ipv6/ip6mr.c:419
ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419
Modules linked in:
CPU: 2 UID: 0 PID: 6041 Comm: syz-executor183 Not tainted
6.12.0-syzkaller-10681-g65ae975e97d5 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419
Code: 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c
02 00 75 58 49 83 bc 24 c0 0e 00 00 00 74 09 e8 44 ef a9 f7 90 <0f> 0b
90 e8 3b ef a9 f7 48 8d 7b 38 e8 12 a3 96 f7 48 89 df be 0f
RSP: 0018:ffffc90004267bd8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88803c710000 RCX: ffffffff89e4d844
RDX: ffff88803c52c880 RSI: ffffffff89e4d87c RDI: ffff88803c578ec0
RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88803c578000
R13: ffff88803c710000 R14: ffff88803c710008 R15: dead000000000100
FS: 00007f7a855ee6c0(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7a85689938 CR3: 000000003c492000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ip6mr_rules_exit+0x176/0x2d0 net/ipv6/ip6mr.c:283
ip6mr_net_exit_batch+0x53/0xa0 net/ipv6/ip6mr.c:1388
ops_exit_list+0x128/0x180 net/core/net_namespace.c:177
setup_net+0x4fe/0x860 net/core/net_namespace.c:394
copy_net_ns+0x2b4/0x6b0 net/core/net_namespace.c:500
create_new_namespaces+0x3ea/0xad0 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x45d/0xa40 kernel/fork.c:3334
__do_sys_unshare kernel/fork.c:3405 [inline]
__se_sys_unshare kernel/fork.c:3403 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3403
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7a856332d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7a855ee238 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f7a856bd308 RCX: 00007f7a856332d9
RDX: 00007f7a8560f8c6 RSI: 0000000000000000 RDI: 0000000062040200
RBP: 00007f7a856bd300 R08: 00007fff932160a7 R09: 00007f7a855ee6c0
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a856bd30c
R13: 0000000000000000 R14: 00007fff93215fc0 R15: 00007fff932160a8
</TASK>
The root cause is a network namespace creation failing after successful
initialization of the ipmr subsystem. Such a case is not currently
matched by the ipmr_can_free_table() helper.
New namespaces are zeroed on allocation and inserted into net ns list
only after successful creation; when deleting an ipmr table, the list
next pointer can be NULL only on netns initialization failure.
Update the ipmr_can_free_table() checks leveraging such condition.
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+6e8cb445d4b43d006e0c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6e8cb445d4b43d006e0c
Fixes: 11b6e701bce9 ("ipmr: add debug check for mr table cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/8bde975e21bbca9d9c27e36209b2dd4f1d7a3f00.1733212078.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the __netpoll_setup() function, when accessing the device's npinfo
pointer, replace rcu_access_pointer() with rtnl_dereference(). This
change is more appropriate, as suggested by Herbert Xu[1].
The function is called with the RTNL mutex held, and the pointer is
being dereferenced later, so, dereference earlier and just reuse the
pointer for the if/else.
The replacement ensures correct pointer access while maintaining
the existing locking and RCU semantics of the netpoll subsystem.
Link: https://lore.kernel.org/lkml/Zz1cKZYt1e7elibV@gondor.apana.org.au/ [1]
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20241202-netpoll_rcu_herbet_fix-v2-1-2b9d58edc76a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rhashtable does not provide stable walk, duplicated elements are
possible in case of resizing. I considered that checking for errors when
calling rhashtable_walk_next() was sufficient to detect the resizing.
However, rhashtable_walk_next() returns -EAGAIN only at the end of the
iteration, which is too late, because a gc work containing duplicated
elements could have been already scheduled for removal to the worker.
Add a u32 gc worker sequence number per set, bump it on every workqueue
run. Annotate gc worker sequence number on the expired element. Use it
to skip those already seen in this gc workqueue run.
Note that this new field is never reset in case gc transaction fails, so
next gc worker run on the expired element overrides it. Wraparound of gc
worker sequence number should not be an issue with stale gc worker
sequence number in the element, that would just postpone the element
removal in one gc run.
Note that it is not possible to use flags to annotate that element is
pending gc run to detect duplicates, given that gc transaction can be
invalidated in case of update from the control plane, therefore, not
allowing to clear such flag.
On x86_64, pahole reports no changes in the size of nft_rhash_elem.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Tested-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Replace the (secctx,seclen) pointer pair with a single
lsm_context pointer to allow return of the LSM identifier
along with the context and context length. This allows
security_release_secctx() to know how to release the
context. Callers have been modified to use or save the
returned data from the new structure.
security_secid_to_secctx() and security_lsmproc_to_secctx()
will now return the length value on success instead of 0.
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak, kdoc fix, signedness fix from Dan Carpenter]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Add a new lsm_context data structure to hold all the information about a
"security context", including the string, its size and which LSM allocated
the string. The allocation information is necessary because LSMs have
different policies regarding the lifecycle of these strings. SELinux
allocates and destroys them on each use, whereas Smack provides a pointer
to an entry in a list that never goes away.
Update security_release_secctx() to use the lsm_context instead of a
(char *, len) pair. Change its callers to do likewise. The LSMs
supporting this hook have had comments added to remind the developer
that there is more work to be done.
The BPF security module provides all LSM hooks. While there has yet to
be a known instance of a BPF configuration that uses security contexts,
the possibility is real. In the existing implementation there is
potential for multiple frees in that case.
Cc: linux-integrity@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
To: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: linux-nfs@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Currently, ieee80211_ie_build_he_oper() lacks support for 320 MHz handling
(already noted as a TODO). This is because 320 MHz is not included in
IEEE 802.11-ax. However, IEEE 802.11-be introduces 320 MHz support and if
the chandef indicates a 320 MHz bandwidth and is used directly as it is, it
will result in an incorrect HE Operation Information Element.
In order to support EHT 320 MHz, HE Operation Element should indicate
bandwidth as 160 MHz only. In EHT Operation IE, the correct bandwidth will
be present. Devices capable of EHT can parse EHT Information Element and
connect in 320 MHz and other HE capable devices can parse HE and can
connect in 160 MHz.
Add support to downgrade the bandwidth in ieee80211_ie_build_he_oper()
during 320 MHz operation and advertise it.
Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20241119-mesh_320mhz_support-v1-1-f9463338d584@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When running ethtool on a monitor interface, the channel
wasn't reporting properly. This adds logic to properly report
the channel for monitor interfaces in ethtool.
Signed-off-by: Dylan Eskew <dylan.eskew@candelatech.com>
Link: https://patch.msgid.link/20241113144608.334060-1-dylan.eskew@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ML interfaces can have multiple affiliated links to it and
hence there is a need to report tx power of specified link
rather deflink.
Add changes to report tx power of requested link from mac80211,
also pass link id as an argument in get_tx_power op so that supported
drivers can use it to report link's tx power.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, TX power is reported on interface/wdev level as
part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links
can be part of an interface/wdev and hence its necessary to
report the TX power of each link.
Add support to send tx power for all valid links of an MLD as
part of NL80211_CMD_GET_INTERFACE request.
As far as userspace is concerned, there is no behavioral change
for Non-ML Interfaces. For ML interfaces, userspace should fetch
TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to
how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched.
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
test_cfg80211_parse_colocated_ap()
kunit_kzalloc() may return NULL, dereferencing it without NULL check may
lead to NULL dereference.
Add a NULL check for ies.
Fixes: 45d43937a44c ("wifi: cfg80211: add a kunit test for 6 GHz colocated AP parsing")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Link: https://patch.msgid.link/20241115063835.5888-1-zichenxie0106@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The wiphy guard simplifies some code here, so use it.
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241122094225.cea65b2d2fd4.Icc168c4bbeddec98ea096aee9077211a7b88b69e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Define a guard for the wiphy mutex, and use it in
most code in cfg80211, though not all due to some
interaction with RTNL and/or indentation.
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241122094225.88765cbaab65.I610c9b14f36902e75e1d13f0db29f8bef2298804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is needed for PASN based P2P pairing.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241203222744.6ee3ef9f1374.Ib3074ffbe7b296e0f162b2543e84346b190dfbeb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Macro for_each_sdata_link() accepts input '_local' but uses 'local'
in its processing. This currently works because all the functions
calling this macro have declared 'local' as a variable themselves.
But this results in compilation error when a new caller uses
'sdata->local' instead of declaring 'local' variable.
Use '_local' instead of 'local' in for_each_sdata_link().
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://patch.msgid.link/20241127180255.1460553-1-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
User space may unload ip_set.ko while it is itself requesting a set type
backend module, leading to a kernel crash. The race condition may be
provoked by inserting an mdelay() right after the nfnl_unlock() call.
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty.
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When matching erspan_opt in cls_flower, only the (version, dir, hwid)
fields are relevant. However, in fl_set_erspan_opt() it initializes
all bits of erspan_opt and its mask to 1. This inadvertently requires
packets to match not only the (version, dir, hwid) fields but also the
other fields that are unexpectedly set to 1.
This patch resolves the issue by ensuring that only the (version, dir,
hwid) fields are configured in fl_set_erspan_opt(), leaving the other
fields to 0 in erspan_opt.
Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The check for non-zero ring with RSS is only relevant for
ETHTOOL_SRXCLSRLINS command, in other cases the check tries to access
memory which was not initialized by the userspace tool. Only perform the
check in case of ETHTOOL_SRXCLSRLINS.
Without this patch, filter deletion (for example) could statistically
result in a false error:
# ethtool --config-ntuple eth3 delete 484
rmgr: Cannot delete RX class rule: Invalid argument
Cannot delete classification rule
Fixes: 9e43ad7a1ede ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in")
Link: https://lore.kernel.org/netdev/871a9ecf-1e14-40dd-bbd7-e90c92f89d47@nvidia.com/
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241202164805.1637093-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 612b1c0dec5bc7367f90fc508448b8d0d7c05414. On a
scenario with multiple threads blocking on a recvfrom(), we need to call
sock_def_readable() on every __udp_enqueue_schedule_skb() otherwise the
threads won't be woken up as __skb_wait_for_more_packets() is using
prepare_to_wait_exclusive().
Link: https://bugzilla.redhat.com/2308477
Fixes: 612b1c0dec5b ("udp: avoid calling sock_def_readable() if possible")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241202155620.1719-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make napi_hash_lock IRQ safe. It is used during the control path, and is
taken and released in napi_hash_add and napi_hash_del, which will
typically be called by calls to napi_enable and napi_disable.
This change avoids a deadlock in pcnet32 (and other any other drivers
which follow the same pattern):
CPU 0:
pcnet32_open
spin_lock_irqsave(&lp->lock, ...)
napi_enable
napi_hash_add <- before this executes, CPU 1 proceeds
spin_lock(napi_hash_lock)
[...]
spin_unlock_irqrestore(&lp->lock, flags);
CPU 1:
pcnet32_close
napi_disable
napi_hash_del
spin_lock(napi_hash_lock)
< INTERRUPT >
pcnet32_interrupt
spin_lock(lp->lock) <- DEADLOCK
Changing the napi_hash_lock to be IRQ safe prevents the IRQ from firing
on CPU 1 until napi_hash_lock is released, preventing the deadlock.
Cc: stable@vger.kernel.org
Fixes: 86e25f40aa1e ("net: napi: Add napi_config")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/netdev/85dd4590-ea6b-427d-876a-1d8559c7ad82@roeck-us.net/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241202182103.363038-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching")
Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Blamed commit forgot to change hsr_init_skb() to allocate
larger skb for RedBox case.
Indeed, send_hsr_supervision_frame() will add
two additional components (struct hsr_sup_tlv
and struct hsr_sup_payload)
syzbot reported the following crash:
skbuff: skb_over_panic: text:ffffffff8afd4b0a len:34 put:6 head:ffff88802ad29e00 data:ffff88802ad29f22 tail:0x144 end:0x140 dev:gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 2 UID: 0 PID: 7611 Comm: syz-executor Not tainted 6.12.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:skb_panic+0x157/0x1d0 net/core/skbuff.c:206
Code: b6 04 01 84 c0 74 04 3c 03 7e 21 8b 4b 70 41 56 45 89 e8 48 c7 c7 a0 7d 9b 8c 41 57 56 48 89 ee 52 4c 89 e2 e8 9a 76 79 f8 90 <0f> 0b 4c 89 4c 24 10 48 89 54 24 08 48 89 34 24 e8 94 76 fb f8 4c
RSP: 0018:ffffc90000858ab8 EFLAGS: 00010282
RAX: 0000000000000087 RBX: ffff8880598c08c0 RCX: ffffffff816d3e69
RDX: 0000000000000000 RSI: ffffffff816de786 RDI: 0000000000000005
RBP: ffffffff8c9b91c0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000302 R11: ffffffff961cc1d0 R12: ffffffff8afd4b0a
R13: 0000000000000006 R14: ffff88804b938130 R15: 0000000000000140
FS: 000055558a3d6500(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1295974ff8 CR3: 000000002ab6e000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
skb_over_panic net/core/skbuff.c:211 [inline]
skb_put+0x174/0x1b0 net/core/skbuff.c:2617
send_hsr_supervision_frame+0x6fa/0x9e0 net/hsr/hsr_device.c:342
hsr_proxy_announce+0x1a3/0x4a0 net/hsr/hsr_device.c:436
call_timer_fn+0x1a0/0x610 kernel/time/timer.c:1794
expire_timers kernel/time/timer.c:1845 [inline]
__run_timers+0x6e8/0x930 kernel/time/timer.c:2419
__run_timer_base kernel/time/timer.c:2430 [inline]
__run_timer_base kernel/time/timer.c:2423 [inline]
run_timer_base+0x111/0x190 kernel/time/timer.c:2439
run_timer_softirq+0x1a/0x40 kernel/time/timer.c:2449
handle_softirqs+0x213/0x8f0 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu kernel/softirq.c:637 [inline]
irq_exit_rcu+0xbb/0x120 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
Fixes: 5055cccfc2d1 ("net: hsr: Provide RedBox support (HSR-SAN)")
Reported-by: syzbot+7f4643b267cc680bfa1c@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lukasz Majewski <lukma@denx.de>
Link: https://patch.msgid.link/20241202100558.507765-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently rtnl_link_get_net_ifla() gets called twice when we create
peer devices, once in rtnl_add_peer_net() and once in each ->newlink()
implementation.
This looks safer, however, it leads to a classic Time-of-Check to
Time-of-Use (TOCTOU) bug since IFLA_NET_NS_PID is very dynamic. And
because of the lack of checking error pointer of the second call, it
also leads to a kernel crash as reported by syzbot.
Fix this by getting rid of the second call, which already becomes
redudant after Kuniyuki's work. We have to propagate the result of the
first rtnl_link_get_net_ifla() down to each ->newlink().
Reported-by: syzbot+21ba4d5adff0b6a7cfc6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=21ba4d5adff0b6a7cfc6
Fixes: 0eb87b02a705 ("veth: Set VETH_INFO_PEER to veth_link_ops.peer_type.")
Fixes: 6b84e558e95d ("vxcan: Set VXCAN_INFO_PEER to vxcan_link_ops.peer_type.")
Fixes: fefd5d082172 ("netkit: Set IFLA_NETKIT_PEER_INFO to netkit_link_ops.peer_type.")
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241129212519.825567-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Station's spatial streaming capability should be initialized before
handling VHT OMN, because the handling requires the capability information.
Fixes: a8bca3e9371d ("wifi: mac80211: track capability/opmode NSS separately")
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Link: https://patch.msgid.link/20241118080722.9603-1-benjamin-jw.lin@mediatek.com
[rewrite subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since adding support for opting out of virtual monitor support, a zero vif
addr was used to indicate passive vs active monitor to the driver.
This would break the vif->addr when changing the netdev mac address before
switching the interface from monitor to sta mode.
Fix the regression by adding a separate flag to indicate whether vif->addr
is valid.
Reported-by: syzbot+9ea265d998de25ac6a46@syzkaller.appspotmail.com
Fixes: 9d40f7e32774 ("wifi: mac80211: add flag to opt out of virtual monitor support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20241115115850.37449-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If we got an unprotected action frame with CSA and then we heard the
beacon with the CSA IE, we'll block the queues with the CSA reason
twice. Since this reason is refcounted, we won't wake up the queues
since we wake them up only once and the ref count will never reach 0.
This led to blocked queues that prevented any activity (even
disconnection wouldn't reset the queue state and the only way to recover
would be to reload the kernel module.
Fix this by not refcounting the CSA reason.
It becomes now pointless to maintain the csa_blocked_queues state.
Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 414e090bc41d ("wifi: mac80211: restrict public action ECSA frame handling")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In case we fail to resume, we'll WARN with
"Hardware became unavailable during restart." and we'll wait until user
space does something. It'll typically bring the interface down and up to
recover. This won't work though because the queues are still stopped on
IEEE80211_QUEUE_STOP_REASON_SUSPEND reason.
Make sure we clear that reason so that we give a chance to the recovery
to succeed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.cd628f560f97.I76a15fdb92de450e5329940125f3c58916be3942@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, during link deletion, the link ID is first removed from the
valid_links bitmap before performing any clean-up operations. However, some
functions require the link ID to remain in the valid_links bitmap. One
such example is cfg80211_cac_event(). The flow is -
nl80211_remove_link()
cfg80211_remove_link()
ieee80211_del_intf_link()
ieee80211_vif_set_links()
ieee80211_vif_update_links()
ieee80211_link_stop()
cfg80211_cac_event()
cfg80211_cac_event() requires link ID to be present but it is cleared
already in cfg80211_remove_link(). Ultimately, WARN_ON() is hit.
Therefore, clear the link ID from the bitmap only after completing the link
clean-up.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20241121-mlo_dfs_fix-v2-1-92c3bf7ab551@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With the new __counted_by annocation in cfg80211_mbssid_elems,
the "cnt" struct member must be set before accessing the "elem"
array. Failing to do so will trigger a runtime warning when enabling
CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Fixes: c14679d7005a ("wifi: cfg80211: Annotate struct cfg80211_mbssid_elems with __counted_by")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Link: https://patch.msgid.link/20241123172500.311853-1-lihaoyu499@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On 32-bit systems, the size of an unsigned long is 4 bytes,
while a u64 is 8 bytes. Therefore, when using
or_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE),
the code is incorrectly searching for a bit in a 32-bit
variable that is expected to be 64 bits in size,
leading to incorrect bit finding.
Solution: Ensure that the size of the bits variable is correctly
adjusted for each architecture.
Call Trace:
? show_regs+0x54/0x58
? __warn+0x6b/0xd4
? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211]
? report_bug+0x113/0x150
? exc_overflow+0x30/0x30
? handle_bug+0x27/0x44
? exc_invalid_op+0x18/0x50
? handle_exception+0xf6/0xf6
? exc_overflow+0x30/0x30
? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211]
? exc_overflow+0x30/0x30
? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211]
? ieee80211_mesh_work+0xff/0x260 [mac80211]
? cfg80211_wiphy_work+0x72/0x98 [cfg80211]
? process_one_work+0xf1/0x1fc
? worker_thread+0x2c0/0x3b4
? kthread+0xc7/0xf0
? mod_delayed_work_on+0x4c/0x4c
? kthread_complete_and_exit+0x14/0x14
? ret_from_fork+0x24/0x38
? kthread_complete_and_exit+0x14/0x14
? ret_from_fork_asm+0xf/0x14
? entry_INT80_32+0xf0/0xf0
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Link: https://patch.msgid.link/20241125162920.2711462-1-ih@simonwunderlich.de
[restore no-op path for no changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since the netlink attribute range validation provides inclusive
checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be
IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one.
One crash stack for demonstration:
==================================================================
BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939
Read of size 6 at addr 001102080000000c by task fuzzer.386/9508
CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106
print_report+0xe0/0x750 mm/kasan/report.c:398
kasan_report+0x139/0x170 mm/kasan/report.c:495
kasan_check_range+0x287/0x290 mm/kasan/generic.c:189
memcpy+0x25/0x60 mm/kasan/shadow.c:65
ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939
rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline]
nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453
genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756
genl_family_rcv_msg net/netlink/genetlink.c:833 [inline]
genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850
netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508
genl_rcv+0x24/0x40 net/netlink/genetlink.c:861
netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline]
netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352
netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874
sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Update the policy to ensure correct validation.
Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Suggested-by: Cengiz Can <cengiz.can@canonical.com>
Link: https://patch.msgid.link/20241130170526.96698-1-linma@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We encountered a LGR/link use-after-free issue, which manifested as
the LGR/link refcnt reaching 0 early and entering the clear process,
making resource access unsafe.
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 14 PID: 107447 at lib/refcount.c:25 refcount_warn_saturate+0x9c/0x140
Workqueue: events smc_lgr_terminate_work [smc]
Call trace:
refcount_warn_saturate+0x9c/0x140
__smc_lgr_terminate.part.45+0x2a8/0x370 [smc]
smc_lgr_terminate_work+0x28/0x30 [smc]
process_one_work+0x1b8/0x420
worker_thread+0x158/0x510
kthread+0x114/0x118
or
refcount_t: underflow; use-after-free.
WARNING: CPU: 6 PID: 93140 at lib/refcount.c:28 refcount_warn_saturate+0xf0/0x140
Workqueue: smc_hs_wq smc_listen_work [smc]
Call trace:
refcount_warn_saturate+0xf0/0x140
smcr_link_put+0x1cc/0x1d8 [smc]
smc_conn_free+0x110/0x1b0 [smc]
smc_conn_abort+0x50/0x60 [smc]
smc_listen_find_device+0x75c/0x790 [smc]
smc_listen_work+0x368/0x8a0 [smc]
process_one_work+0x1b8/0x420
worker_thread+0x158/0x510
kthread+0x114/0x118
It is caused by repeated release of LGR/link refcnt. One suspect is that
smc_conn_free() is called repeatedly because some smc_conn_free() from
server listening path are not protected by sock lock.
e.g.
Calls under socklock | smc_listen_work
-------------------------------------------------------
lock_sock(sk) | smc_conn_abort
smc_conn_free | \- smc_conn_free
\- smcr_link_put | \- smcr_link_put (duplicated)
release_sock(sk)
So here add sock lock protection in smc_listen_work() path, making it
exclusive with other connection operations.
Fixes: 3b2dec2603d5 ("net/smc: restructure client and server code in af_smc")
Co-developed-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Co-developed-by: Kai <KaiShen@linux.alibaba.com>
Signed-off-by: Kai <KaiShen@linux.alibaba.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We encountered a warning that close_work was canceled before
initialization.
WARNING: CPU: 7 PID: 111103 at kernel/workqueue.c:3047 __flush_work+0x19e/0x1b0
Workqueue: events smc_lgr_terminate_work [smc]
RIP: 0010:__flush_work+0x19e/0x1b0
Call Trace:
? __wake_up_common+0x7a/0x190
? work_busy+0x80/0x80
__cancel_work_timer+0xe3/0x160
smc_close_cancel_work+0x1a/0x70 [smc]
smc_close_active_abort+0x207/0x360 [smc]
__smc_lgr_terminate.part.38+0xc8/0x180 [smc]
process_one_work+0x19e/0x340
worker_thread+0x30/0x370
? process_one_work+0x340/0x340
kthread+0x117/0x130
? __kthread_cancel_work+0x50/0x50
ret_from_fork+0x22/0x30
This is because when smc_close_cancel_work is triggered, e.g. the RDMA
driver is rmmod and the LGR is terminated, the conn->close_work is
flushed before initialization, resulting in WARN_ON(!work->func).
__smc_lgr_terminate | smc_connect_{rdma|ism}
-------------------------------------------------------------
| smc_conn_create
| \- smc_lgr_register_conn
for conn in lgr->conns_all |
\- smc_conn_kill |
\- smc_close_active_abort |
\- smc_close_cancel_work |
\- cancel_work_sync |
\- __flush_work |
(close_work) |
| smc_close_init
| \- INIT_WORK(&close_work)
So fix this by initializing close_work before establishing the
connection.
Fixes: 46c28dbd4c23 ("net/smc: no socket state changes in tasklet context")
Fixes: 413498440e30 ("net/smc: add SMC-D support in af_smc")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzkaller reported a use-after-free of UDP kernel socket
in cleanup_bearer() without repro. [0][1]
When bearer_disable() calls tipc_udp_disable(), cleanup
of the UDP kernel socket is deferred by work calling
cleanup_bearer().
tipc_net_stop() waits for such works to finish by checking
tipc_net(net)->wq_count. However, the work decrements the
count too early before releasing the kernel socket,
unblocking cleanup_net() and resulting in use-after-free.
Let's move the decrement after releasing the socket in
cleanup_bearer().
[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at
sk_alloc+0x438/0x608
inet_create+0x4c8/0xcb0
__sock_create+0x350/0x6b8
sock_create_kern+0x58/0x78
udp_sock_create4+0x68/0x398
udp_sock_create+0x88/0xc8
tipc_udp_enable+0x5e8/0x848
__tipc_nl_bearer_enable+0x84c/0xed8
tipc_nl_bearer_enable+0x38/0x60
genl_family_rcv_msg_doit+0x170/0x248
genl_rcv_msg+0x400/0x5b0
netlink_rcv_skb+0x1dc/0x398
genl_rcv+0x44/0x68
netlink_unicast+0x678/0x8b0
netlink_sendmsg+0x5e4/0x898
____sys_sendmsg+0x500/0x830
[1]:
BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline]
BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
udp_hashslot include/net/udp.h:85 [inline]
udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979
sk_common_release+0xaf/0x3f0 net/core/sock.c:3820
inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437
inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489
__sock_release net/socket.c:658 [inline]
sock_release+0xa0/0x210 net/socket.c:686
cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
kthread+0x531/0x6b0 kernel/kthread.c:389
ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244
Uninit was created at:
slab_free_hook mm/slub.c:2269 [inline]
slab_free mm/slub.c:4580 [inline]
kmem_cache_free+0x207/0xc40 mm/slub.c:4682
net_free net/core/net_namespace.c:454 [inline]
cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310
worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391
kthread+0x531/0x6b0 kernel/kthread.c:389
ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244
CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: events cleanup_bearer
Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241127050512.28438-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If dccp_feat_push_confirm() fails after new value for SP feature was accepted
without reconciliation ('entry == NULL' branch), memory allocated for that value
with dccp_feat_clone_sp_val() is never freed.
Here is the kmemleak stack for this:
unreferenced object 0xffff88801d4ab488 (size 8):
comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s)
hex dump (first 8 bytes):
01 b4 4a 1d 80 88 ff ff ..J.....
backtrace:
[<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128
[<0000000019b38405>] kmemdup include/linux/string.h:465 [inline]
[<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline]
[<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline]
[<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline]
[<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416
[<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125
[<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650
[<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688
[<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline]
[<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570
[<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111
[<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline]
[<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696
[<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735
[<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865
[<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882
[<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline]
[<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline]
[<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889
[<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
[<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1
Clean up the allocated memory in case of dccp_feat_push_confirm() failure
and bail out with an error reset code.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: e77b8363b2ea ("dccp: Process incoming Change feature-negotiation options")
Signed-off-by: Ivan Solodovnikov <solodovnikov.ia@phystech.edu>
Link: https://patch.msgid.link/20241126143902.190853-1-solodovnikov.ia@phystech.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Dst objects get leaked in ip6_negative_advice() when this function is
executed for an expired IPv6 route located in the exception table. There
are several conditions that must be fulfilled for the leak to occur:
* an ICMPv6 packet indicating a change of the MTU for the path is received,
resulting in an exception dst being created
* a TCP connection that uses the exception dst for routing packets must
start timing out so that TCP begins retransmissions
* after the exception dst expires, the FIB6 garbage collector must not run
before TCP executes ip6_negative_advice() for the expired exception dst
When TCP executes ip6_negative_advice() for an exception dst that has
expired and if no other socket holds a reference to the exception dst, the
refcount of the exception dst is 2, which corresponds to the increment
made by dst_init() and the increment made by the TCP socket for which the
connection is timing out. The refcount made by the socket is never
released. The refcount of the dst is decremented in sk_dst_reset() but
that decrement is counteracted by a dst_hold() intentionally placed just
before the sk_dst_reset() in ip6_negative_advice(). After
ip6_negative_advice() has finished, there is no other object tied to the
dst. The socket lost its reference stored in sk_dst_cache and the dst is
no longer in the exception table. The exception dst becomes a leaked
object.
As a result of this dst leak, an unbalanced refcount is reported for the
loopback device of a net namespace being destroyed under kernels that do
not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"):
unregister_netdevice: waiting for lo to become free. Usage count = 2
Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The
patch that introduced the dst_hold() in ip6_negative_advice() was
92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22
merely refactored the code with regards to the dst refcount so the issue
was present even before 92f1655aa2b22. The bug was introduced in
54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually
expired.") where the expired cached route is deleted and the sk_dst_cache
member of the socket is set to NULL by calling dst_negative_advice() but
the refcount belonging to the socket is left unbalanced.
The IPv4 version - ipv4_negative_advice() - is not affected by this bug.
When the TCP connection times out ipv4_negative_advice() merely resets the
sk_dst_cache of the socket while decrementing the refcount of the
exception dst.
Fixes: 92f1655aa2b22 ("net: fix __dst_negative_advice() race")
Fixes: 54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually expired.")
Link: https://lore.kernel.org/netdev/20241113105611.GA6723@incl/T/#u
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241128085950.GA4505@incl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-12-02
The first patch is by me and allows the use of sleeping GPIOs to set
termination GPIOs.
Alexander Kozhinov fixes the gs_usb driver to use the endpoints
provided by the usb endpoint descriptions instead of hard coded ones.
Dario Binacchi contributes 11 statistics related patches for various
CAN driver. A potential use after free in the hi311x is fixed. The
statistics for the c_can, sun4i_can, hi311x, m_can, ifi_canfd,
sja1000, sun4i_can, ems_usb, f81604 are fixed: update statistics even
if the allocation of the error skb fails and fix the incrementing of
the rx,tx error counters.
A patch by me fixes the workaround for DS80000789E 6 erratum in the
mcp251xfd driver.
The last patch is by Dmitry Antipov, targets the j1939 CAN protocol
and fixes a skb reference counting issue.
* tag 'linux-can-fixes-for-6.13-20241202' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: j1939_session_new(): fix skb reference counting
can: mcp251xfd: mcp251xfd_get_tef_len(): work around erratum DS80000789E 6.
can: f81604: f81604_handle_can_bus_errors(): fix {rx,tx}_errors statistics
can: ems_usb: ems_usb_rx_err(): fix {rx,tx}_errors statistics
can: sun4i_can: sun4i_can_err(): fix {rx,tx}_errors statistics
can: sja1000: sja1000_err(): fix {rx,tx}_errors statistics
can: hi311x: hi3110_can_ist(): fix {rx,tx}_errors statistics
can: ifi_canfd: ifi_canfd_handle_lec_err(): fix {rx,tx}_errors statistics
can: m_can: m_can_handle_lec_err(): fix {rx,tx}_errors statistics
can: hi311x: hi3110_can_ist(): update state error statistics if skb allocation fails
can: hi311x: hi3110_can_ist(): fix potential use-after-free
can: sun4i_can: sun4i_can_err(): call can_change_state() even if cf is NULL
can: c_can: c_can_handle_bus_err(): update statistics if skb allocation fails
can: gs_usb: add usb endpoint address detection at driver probe step
can: dev: can_set_termination(): allow sleeping GPIOs
====================
Link: https://patch.msgid.link/20241202090040.1110280-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
