summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2025-03-18inet: frags: change inet_frag_kill() to defer refcount updatesEric Dumazet
In the following patch, we no longer assume inet_frag_kill() callers own a reference. Consuming two refcounts from inet_frag_kill() would lead in UAF. Propagate the pointer to the refs that will be consumed later by the final inet_frag_putn() call. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250312082250.1803501-4-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18ipv4: frags: remove ipq_put()Eric Dumazet
Replace ipq_put() with inet_frag_putn() Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250312082250.1803501-3-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18inet: frags: add inet_frag_putn() helperEric Dumazet
inet_frag_putn() can release multiple references in one step. Use it in inet_frags_free_cb(). Replace inet_frag_put(X) with inet_frag_putn(X, 1) Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250312082250.1803501-2-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18ipv6: Set errno after ip_fib_metrics_init() in ip6_route_info_create().Kuniyuki Iwashima
While creating a new IPv6, we could get a weird -ENOMEM when RTA_NH_ID is set and either of the conditions below is true: 1) CONFIG_IPV6_SUBTREES is enabled and rtm_src_len is specified 2) nexthop_get() fails e.g.) # strace ip -6 route add fe80::dead:beef:dead:beef nhid 1 from :: recvmsg(3, {msg_iov=[{iov_base=[...[ {error=-ENOMEM, msg=[... [...]]}, [{nla_len=49, nla_type=NLMSGERR_ATTR_MSG}, "Nexthops can not be used with so"...] ]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148 Let's set err explicitly after ip_fib_metrics_init() in ip6_route_info_create(). Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250312013854.61125-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().Kuniyuki Iwashima
fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything when it fails. Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh") moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init() but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak. Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the error path. Note that we can remove the fib6_nh_release() call in nh_create_ipv6() later in net-next.git. Fixes: 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250312010333.56001-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18Merge tag 'linux-can-next-for-6.15-20250314' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2025-03-14 this is a pull request of 4 patches for net-next/main. In the first 2 patches by Dimitri Fedrau add CAN transceiver support to the flexcan driver. Frank Li's patch adds i.MX94 support to the flexcan device tree bindings. The last patch is by Davide Caratti and adds protocol counter for AF_CAN sockets. linux-can-next-for-6.15-20250314 * tag 'linux-can-next-for-6.15-20250314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: add protocol counter for AF_CAN sockets dt-bindings: can: fsl,flexcan: add i.MX94 support can: flexcan: add transceiver capabilities dt-bindings: can: fsl,flexcan: add transceiver capabilities ==================== Link: https://patch.msgid.link/20250314132327.2905693-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18Merge tag 'linux-can-fixes-for-6.14-20250314' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2025-03-14 this is a pull request of 6 patches for net/main. The first patch is by Vincent Mailhol and fixes an out of bound read in strscpy() in the ucan driver. Oliver Hartkopp contributes a patch for the af_can statistics to use atomic access in the hot path. The next 2 patches are by Biju Das, target the rcar_canfd driver and fix the page entries in the AFL list. The 2 patches by Haibo Chen for the flexcan driver fix the suspend and resume functions. linux-can-fixes-for-6.14-20250314 * tag 'linux-can-fixes-for-6.14-20250314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: flexcan: disable transceiver during system PM can: flexcan: only change CAN state when link up in system PM can: rcar_canfd: Fix page entries in the AFL list dt-bindings: can: renesas,rcar-canfd: Fix typo in pattern properties for R-Car V4M can: statistics: use atomic access in hot path can: ucan: fix out of bound read in strscpy() source ==================== Link: https://patch.msgid.link/20250314130909.2890541-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18Merge tag 'batadv-next-pullrequest-20250313' of ↵Paolo Abeni
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - drop batadv_priv_debug_log struct, by Sven Eckelmann - adopt netdev_hold() / netdev_put(), by Eric Dumazet - add support for jumbo frames, by Sven Eckelmann - use consistent name for mesh interface, by Sven Eckelmann - cleanup B.A.T.M.A.N. IV OGM aggregation handling, by Sven Eckelmann (4 patches) - add missing newlines for log macros, by Sven Eckelmann * tag 'batadv-next-pullrequest-20250313' of git://git.open-mesh.org/linux-merge: batman-adv: add missing newlines for log macros batman-adv: Limit aggregation size to outgoing MTU batman-adv: Use actual packet count for aggregated packets batman-adv: Switch to bitmap helper for aggregation handling batman-adv: Limit number of aggregated packets directly batman-adv: Use consistent name for mesh interface batman-adv: Add support for jumbo frames batman-adv: adopt netdev_hold() / netdev_put() batman-adv: Drop batadv_priv_debug_log struct batman-adv: Start new development cycle ==================== Link: https://patch.msgid.link/20250313164519.72808-1-sw@simonwunderlich.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18net: ipv6: fix TCP GSO segmentation with NATFelix Fietkau
When updating the source/destination address, the TCP/UDP checksum needs to be updated as well. Fixes: bee88cd5bd83 ("net: add support for segmenting TCP fraglist GSO packets") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/20250311212530.91519-1-nbd@nbd.name Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18udp_tunnel: use static call for GRO hooks when possiblePaolo Abeni
It's quite common to have a single UDP tunnel type active in the whole system. In such a case we can replace the indirect call for the UDP tunnel GRO callback with a static call. Add the related accounting in the control path and switch to static call when possible. To keep the code simple use a static array for the registered tunnel types, and size such array based on the kernel config. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/6fd1f9c7651151493ecab174e7b8386a1534170d.1741718157.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18udp_tunnel: create a fastpath GRO lookup.Paolo Abeni
Most UDP tunnels bind a socket to a local port, with ANY address, no peer and no interface index specified. Additionally it's quite common to have a single tunnel device per namespace. Track in each namespace the UDP tunnel socket respecting the above. When only a single one is present, store a reference in the netns. When such reference is not NULL, UDP tunnel GRO lookup just need to match the incoming packet destination port vs the socket local port. The tunnel socket never sets the reuse[port] flag[s]. When bound to no address and interface, no other socket can exist in the same netns matching the specified local port. Matching packets with non-local destination addresses will be aggregated, and eventually segmented as needed - no behavior changes intended. Note that the UDP tunnel socket reference is stored into struct netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep all the fastpath-related netns fields in the same struct and allow cacheline-based optimization. Currently both the IPv4 and IPv6 socket pointer share the same cacheline as the `udp_table` field. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/4d5c319c4471161829f50cb8436841de81a5edae.1741718157.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18wifi: cfg80211: init wiphy_work before allocating rfkill failsEdward Adam Davis
syzbort reported a uninitialize wiphy_work_lock in cfg80211_dev_free. [1] After rfkill allocation fails, the wiphy release process will be performed, which will cause cfg80211_dev_free to access the uninitialized wiphy_work related data. Move the initialization of wiphy_work to before rfkill initialization to avoid this issue. [1] INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 UID: 0 PID: 5935 Comm: syz-executor550 Not tainted 6.14.0-rc6-syzkaller-00103-g4003c9e78778 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 assign_lock_key kernel/locking/lockdep.c:983 [inline] register_lock_class+0xc39/0x1240 kernel/locking/lockdep.c:1297 __lock_acquire+0x135/0x3c40 kernel/locking/lockdep.c:5103 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162 cfg80211_dev_free+0x30/0x3d0 net/wireless/core.c:1196 device_release+0xa1/0x240 drivers/base/core.c:2568 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1e4/0x5a0 lib/kobject.c:737 put_device+0x1f/0x30 drivers/base/core.c:3774 wiphy_free net/wireless/core.c:1224 [inline] wiphy_new_nm+0x1c1f/0x2160 net/wireless/core.c:562 ieee80211_alloc_hw_nm+0x1b7a/0x2260 net/mac80211/main.c:835 mac80211_hwsim_new_radio+0x1d6/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5185 hwsim_new_radio_nl+0xb42/0x12b0 drivers/net/wireless/virtual/mac80211_hwsim.c:6242 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2533 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1882 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Fixes: 72d520476a2f ("wifi: cfg80211: cancel wiphy_work before freeing wiphy") Reported-by: syzbot+aaf0488c83d1d5f4f029@syzkaller.appspotmail.com Close: https://syzkaller.appspot.com/bug?extid=aaf0488c83d1d5f4f029 Tested-by: syzbot+aaf0488c83d1d5f4f029@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Link: https://patch.msgid.link/tencent_258DD9121DDDB9DD9A1939CFAA0D8625B107@qq.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18wifi: mac80211: check basic rates validity in sta_link_apply_parametersMikhail Lobanov
When userspace sets supported rates for a new station via NL80211_CMD_NEW_STATION, it might send a list that's empty or contains only invalid values. Currently, we process these values in sta_link_apply_parameters() without checking the result of ieee80211_parse_bitrates(), which can lead to an empty rates bitmap. A similar issue was addressed for NL80211_CMD_SET_BSS in commit ce04abc3fcc6 ("wifi: mac80211: check basic rates validity"). This patch applies the same approach in sta_link_apply_parameters() for NL80211_CMD_NEW_STATION, ensuring there is at least one valid rate by inspecting the result of ieee80211_parse_bitrates(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: b95eb7f0eee4 ("wifi: cfg80211/mac80211: separate link params from station params") Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru> Link: https://patch.msgid.link/20250317103139.17625-1-m.lobanov@rosa.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18wifi: mac80211: fix indentation in ieee80211_set_monitor_channel()Johannes Berg
There's some confusing indentation, I thought even that braces were missing. Fix indentation here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18wifi: nl80211: store chandef on the correct link when starting CACAditya Kumar Singh
Link ID to store chandef is still being used as 0 even in case of MLO which is incorrect. This leads to issue during CAC completion where link 0 as well gets stopped. Fixes: 0b7798232eee ("wifi: cfg80211/mac80211: use proper link ID for DFS") Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250314-fix_starting_cac_during_mlo-v1-1-3b51617d7ea5@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18Merge net-next/main to resolve conflictsJohannes Berg
There are a few conflicts between the work that went into wireless and that's here now, resolve them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18net: ethtool: Export the link_mode_params definitionsMaxime Chevallier
link_mode_params contains a lookup table of all 802.3 link modes that are currently supported with structured data about each mode's speed, duplex, number of lanes and mediums. As a preparation for a port representation, export that table for the rest of the net stack to use. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250307173611.129125-2-maxime.chevallier@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17tcp: Pass flags to __tcp_send_ackIlpo Järvinen
Accurate ECN needs to send custom flags to handle IP-ECN field reflection during handshake. Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-17tcp: add new TCP_TW_ACK_OOW state and allow ECN bits in TOSIlpo Järvinen
ECN bits in TOS are always cleared when sending in ACKs in TW. Clearing them is problematic for TCP flows that used Accurate ECN because ECN bits decide which service queue the packet is placed into (L4S vs Classic). Effectively, TW ACKs are always downgraded from L4S to Classic queue which might impact, e.g., delay the ACK will experience on the path compared with the other packets of the flow. Change the TW ACK sending code to differentiate: - In tcp_v4_send_reset(), commit ba9e04a7ddf4f ("ip: fix tos reflection in ack and reset packets") cleans ECN bits for TW reset and this is not affected. - In tcp_v4_timewait_ack(), ECN bits for all TW ACKs are cleaned. But now only ECN bits of ACKs for oow data or paws_reject are cleaned, and ECN bits of other ACKs will not be cleaned. - In tcp_v4_reqsk_send_ack(), commit 66b13d99d96a1 ("ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT") did not clean ECN bits of ACKs for oow data or paws_reject. But now the ECN bits rae cleaned for these ACKs. Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-17tcp: AccECN support to tcp_add_backlogIlpo Järvinen
AE flag needs to be preserved for AccECN. Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-17gro: prevent ACE field corruption & better AccECN handlingIlpo Järvinen
There are important differences in how the CWR field behaves in RFC3168 and AccECN. With AccECN, CWR flag is part of the ACE counter and its changes are important so adjust the flags changed mask accordingly. Also, if CWR is there, set the Accurate ECN GSO flag to avoid corrupting CWR flag somewhere. Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-17gso: AccECN supportIlpo Järvinen
Handling the CWR flag differs between RFC 3168 ECN and AccECN. With RFC 3168 ECN aware TSO (NETIF_F_TSO_ECN) CWR flag is cleared starting from 2nd segment which is incompatible how AccECN handles the CWR flag. Such super-segments are indicated by SKB_GSO_TCP_ECN. With AccECN, CWR flag (or more accurately, the ACE field that also includes ECE & AE flags) changes only when new packet(s) with CE mark arrives so the flag should not be changed within a super-skb. The new skb/feature flags are necessary to prevent such TSO engines corrupting AccECN ACE counters by clearing the CWR flag (if the CWR handling feature cannot be turned off). If NIC is completely unaware of RFC3168 ECN (doesn't support NETIF_F_TSO_ECN) or its TSO engine can be set to not touch CWR flag despite supporting also NETIF_F_TSO_ECN, TSO could be safely used with AccECN on such NIC. This should be evaluated per NIC basis (not done in this patch series for any NICs). For the cases, where TSO cannot keep its hands off the CWR flag, a GSO fallback is provided by this patch. Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-17tcp: helpers for ECN mode handlingIlpo Järvinen
Create helpers for TCP ECN modes. No functional changes. Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-17tcp: rework {__,}tcp_ecn_check_ce() -> tcp_data_ecn_check()Ilpo Järvinen
Rename tcp_ecn_check_ce to tcp_data_ecn_check as it is called only for data segments, not for ACKs (with AccECN, also ACKs may get ECN bits). The extra "layer" in tcp_ecn_check_ce() function just checks for ECN being enabled, that can be moved into tcp_ecn_field_check rather than having the __ variant. No functional changes. Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-17tcp: extend TCP flags to allow AE bit/ACE fieldIlpo Järvinen
With AccECN, there's one additional TCP flag to be used (AE) and ACE field that overloads the definition of AE, CWR, and ECE flags. As tcp_flags was previously only 1 byte, the byte-order stuff needs to be added to it's handling. Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-17tcp: create FLAG_TS_PROGRESSIlpo Järvinen
Whenever timestamp advances, it declares progress which can be used by the other parts of the stack to decide that the ACK is the most recent one seen so far. AccECN will use this flag when deciding whether to use the ACK to update AccECN state or not. Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-17tcp: reorganize tcp_in_ack_event() and tcp_count_delivered()Ilpo Järvinen
- Move tcp_count_delivered() earlier and split tcp_count_delivered_ce() out of it - Move tcp_in_ack_event() later - While at it, remove the inline from tcp_in_ack_event() and let the compiler to decide Accurate ECN's heuristics does not know if there is going to be ACE field based CE counter increase or not until after rtx queue has been processed. Only then the number of ACKed bytes/pkts is available. As CE or not affects presence of FLAG_ECE, that information for tcp_in_ack_event is not yet available in the old location of the call to tcp_in_ack_event(). Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-16percpu: use TYPEOF_UNQUAL() in variable declarationsUros Bizjak
Use TYPEOF_UNQUAL() to declare variables as a corresponding type without named address space qualifier to avoid "`__seg_gs' specified for auto variable `var'" errors. Link: https://lkml.kernel.org/r/20250127160709.80604-4-ubizjak@gmail.com Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Acked-by: Nadav Amit <nadav.amit@gmail.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-15net: filter: Avoid shadowing variable in bpf_convert_ctx_access()Breno Leitao
Rename the local variable 'off' to 'offset' to avoid shadowing the existing 'off' variable that is declared as an `int` in the outer scope of bpf_convert_ctx_access(). This fixes a compiler warning: net/core/filter.c:9679:8: warning: declaration shadows a local variable [-Wshadow] Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://patch.msgid.link/20250228-fix_filter-v1-1-ce13eae66fe9@debian.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-03-14net/smc: use the correct ndev to find pnetid by pnetid tableGuangguan Wang
When using smc_pnet in SMC, it will only search the pnetid in the base_ndev of the netdev hierarchy(both HW PNETID and User-defined sw pnetid). This may not work for some scenarios when using SMC in container on cloud environment. In container, there have choices of different container network, such as directly using host network, virtual network IPVLAN, veth, etc. Different choices of container network have different netdev hierarchy. Examples of netdev hierarchy show below. (eth0 and eth1 in host below is the netdev directly related to the physical device). _______________________________ | _________________ | | |POD | | | | | | | | eth0_________ | | | |____| |__| | | | | | | | | | | eth1|base_ndev| eth0_______ | | | | | RDMA || | host |_________| |_______|| --------------------------------- netdev hierarchy if directly using host network ________________________________ | _________________ | | |POD __________ | | | | |upper_ndev| | | | |eth0|__________| | | | |_______|_________| | | |lower netdev | | __|______ | | eth1| | eth0_______ | | |base_ndev| | RDMA || | host |_________| |_______|| --------------------------------- netdev hierarchy if using IPVLAN _______________________________ | _____________________ | | |POD _________ | | | | |base_ndev|| | | |eth0(veth)|_________|| | | |____________|________| | | |pairs | | _______|_ | | | | eth0_______ | | veth|base_ndev| | RDMA || | |_________| |_______|| | _________ | | eth1|base_ndev| | | host |_________| | --------------------------------- netdev hierarchy if using veth Due to some reasons, the eth1 in host is not RDMA attached netdevice, pnetid is needed to map the eth1(in host) with RDMA device so that POD can do SMC-R. Because the eth1(in host) is managed by CNI plugin(such as Terway, network management plugin in container environment), and in cloud environment the eth(in host) can dynamically be inserted by CNI when POD create and dynamically be removed by CNI when POD destroy and no POD related to the eth(in host) anymore. It is hard to config the pnetid to the eth1(in host). But it is easy to config the pnetid to the netdevice which can be seen in POD. When do SMC-R, both the container directly using host network and the container using veth network can successfully match the RDMA device, because the configured pnetid netdev is a base_ndev. But the container using IPVLAN can not successfully match the RDMA device and 0x03030000 fallback happens, because the configured pnetid netdev is not a base_ndev. Additionally, if config pnetid to the eth1(in host) also can not work for matching RDMA device when using veth network and doing SMC-R in POD. To resolve the problems list above, this patch extends to search user -defined sw pnetid in the clc handshake ndev when no pnetid can be found in the base_ndev, and the base_ndev take precedence over ndev for backward compatibility. This patch also can unify the pnetid setup of different network choices list above in container(Config user-defined sw pnetid in the netdevice can be seen in POD). Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-14can: add protocol counter for AF_CAN socketsDavide Caratti
The third column in the output of the following command: | # grep CAN /proc/net/protocols is systematically '0': use sock_prot_inuse_add() to account for the number of sockets for each protocol on top of AF_CAN family. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://patch.msgid.link/9db5d0e6c11b232ad895885616f1258882a32f61.1741952160.git.dcaratti@redhat.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-03-14can: statistics: use atomic access in hot pathOliver Hartkopp
In can_send() and can_receive() CAN messages and CAN filter matches are counted to be visible in the CAN procfs files. KCSAN detected a data race within can_send() when two CAN frames have been generated by a timer event writing to the same CAN netdevice at the same time. Use atomic operations to access the statistics in the hot path to fix the KCSAN complaint. Reported-by: syzbot+78ce4489b812515d5e4d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67cd717d.050a0220.e1a89.0006.GAE@google.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250310143353.3242-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.14-rc6). Conflicts: tools/testing/selftests/drivers/net/ping.py 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py") de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver") https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/ net/core/devmem.c a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()") 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations") https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/ Adjacent changes: tools/testing/selftests/net/Makefile 6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.") 2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4") drivers/net/ethernet/broadcom/bnxt/bnxt.c 661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13tcp: bpf: Support bpf_getsockopt for TCP_BPF_DELACK_MAXJason Xing
Support bpf_getsockopt if application tries to know what the delayed ack max time is. Signed-off-by: Jason Xing <kerneljasonxing@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250312153523.9860-4-kerneljasonxing@gmail.com
2025-03-13tcp: bpf: Support bpf_getsockopt for TCP_BPF_RTO_MINJason Xing
Support bpf_getsockopt if application tries to know what the RTO MIN of this socket is. Signed-off-by: Jason Xing <kerneljasonxing@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250312153523.9860-3-kerneljasonxing@gmail.com
2025-03-13tcp: bpf: Introduce bpf_sol_tcp_getsockopt to support TCP_BPF flagsJason Xing
The patch refactors a bit on supporting getsockopt for TCP BPF flags. For now, only TCP_BPF_SOCK_OPS_CB_FLAGS. Later, more flags will be added into this function. No functional changes here. Signed-off-by: Jason Xing <kerneljasonxing@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250312153523.9860-2-kerneljasonxing@gmail.com
2025-03-13Bluetooth: Fix error code in chan_alloc_skb_cb()Dan Carpenter
The chan_alloc_skb_cb() function is supposed to return error pointers on error. Returning NULL will lead to a NULL dereference. Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-13Merge tag 'nf-25-03-13' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for net: 1) Missing initialization of cpu and jiffies32 fields in conncount, from Kohei Enju. 2) Skip several tests in case kernel is tainted, otherwise tests bogusly report failure too as they also check for tainted kernel, from Florian Westphal. 3) Fix a hyphothetical integer overflow in do_ip_vs_get_ctl() leading to bogus error logs, from Dan Carpenter. 4) Fix incorrect offset in ipv4 option match in nft_exthdr, from Alexey Kashavkin. netfilter pull request 25-03-13 * tag 'nf-25-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_exthdr: fix offset with ipv4_find_option() ipvs: prevent integer overflow in do_ip_vs_get_ctl() selftests: netfilter: skip br_netfilter queue tests if kernel is tainted netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree() ==================== Link: https://patch.msgid.link/20250313095636.2186-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13Revert "openvswitch: switch to per-action label counting in conntrack"Xin Long
Currently, ovs_ct_set_labels() is only called for confirmed conntrack entries (ct) within ovs_ct_commit(). However, if the conntrack entry does not have the labels_ext extension, attempting to allocate it in ovs_ct_get_conn_labels() for a confirmed entry triggers a warning in nf_ct_ext_add(): WARN_ON(nf_ct_is_confirmed(ct)); This happens when the conntrack entry is created externally before OVS increments net->ct.labels_used. The issue has become more likely since commit fcb1aa5163b1 ("openvswitch: switch to per-action label counting in conntrack"), which changed to use per-action label counting and increment net->ct.labels_used when a flow with ct action is added. Since there’s no straightforward way to fully resolve this issue at the moment, this reverts the commit to avoid breaking existing use cases. Fixes: fcb1aa5163b1 ("openvswitch: switch to per-action label counting in conntrack") Reported-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/1bdeb2f3a812bca016a225d3de714427b2cd4772.1741457143.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13net: openvswitch: remove misbehaving actions length checkIlya Maximets
The actions length check is unreliable and produces different results depending on the initial length of the provided netlink attribute and the composition of the actual actions inside of it. For example, a user can add 4088 empty clone() actions without triggering -EMSGSIZE, on attempt to add 4089 such actions the operation will fail with the -EMSGSIZE verdict. However, if another 16 KB of other actions will be *appended* to the previous 4089 clone() actions, the check passes and the flow is successfully installed into the openvswitch datapath. The reason for a such a weird behavior is the way memory is allocated. When ovs_flow_cmd_new() is invoked, it calls ovs_nla_copy_actions(), that in turn calls nla_alloc_flow_actions() with either the actual length of the user-provided actions or the MAX_ACTIONS_BUFSIZE. The function adds the size of the sw_flow_actions structure and then the actually allocated memory is rounded up to the closest power of two. So, if the user-provided actions are larger than MAX_ACTIONS_BUFSIZE, then MAX_ACTIONS_BUFSIZE + sizeof(*sfa) rounded up is 32K + 24 -> 64K. Later, while copying individual actions, we look at ksize(), which is 64K, so this way the MAX_ACTIONS_BUFSIZE check is not actually triggered and the user can easily allocate almost 64 KB of actions. However, when the initial size is less than MAX_ACTIONS_BUFSIZE, but the actions contain ones that require size increase while copying (such as clone() or sample()), then the limit check will be performed during the reserve_sfa_size() and the user will not be allowed to create actions that yield more than 32 KB internally. This is one part of the problem. The other part is that it's not actually possible for the userspace application to know beforehand if the particular set of actions will be rejected or not. Certain actions require more space in the internal representation, e.g. an empty clone() takes 4 bytes in the action list passed in by the user, but it takes 12 bytes in the internal representation due to an extra nested attribute, and some actions require less space in the internal representations, e.g. set(tunnel(..)) normally takes 64+ bytes in the action list provided by the user, but only needs to store a single pointer in the internal implementation, since all the data is stored in the tunnel_info structure instead. And the action size limit is applied to the internal representation, not to the action list passed by the user. So, it's not possible for the userpsace application to predict if the certain combination of actions will be rejected or not, because it is not possible for it to calculate how much space these actions will take in the internal representation without knowing kernel internals. All that is causing random failures in ovs-vswitchd in userspace and inability to handle certain traffic patterns as a result. For example, it is reported that adding a bit more than a 1100 VMs in an OpenStack setup breaks the network due to OVS not being able to handle ARP traffic anymore in some cases (it tries to install a proper datapath flow, but the kernel rejects it with -EMSGSIZE, even though the action list isn't actually that large.) Kernel behavior must be consistent and predictable in order for the userspace application to use it in a reasonable way. ovs-vswitchd has a mechanism to re-direct parts of the traffic and partially handle it in userspace if the required action list is oversized, but that doesn't work properly if we can't actually tell if the action list is oversized or not. Solution for this is to check the size of the user-provided actions instead of the internal representation. This commit just removes the check from the internal part because there is already an implicit size check imposed by the netlink protocol. The attribute can't be larger than 64 KB. Realistically, we could reduce the limit to 32 KB, but we'll be risking to break some existing setups that rely on the fact that it's possible to create nearly 64 KB action lists today. Vast majority of flows in real setups are below 100-ish bytes. So removal of the limit will not change real memory consumption on the system. The absolutely worst case scenario is if someone adds a flow with 64 KB of empty clone() actions. That will yield a 192 KB in the internal representation consuming 256 KB block of memory. However, that list of actions is not meaningful and also a no-op. Real world very large action lists (that can occur for a rare cases of BUM traffic handling) are unlikely to contain a large number of clones and will likely have a lot of tunnel attributes making the internal representation comparable in size to the original action list. So, it should be fine to just remove the limit. Commit in the 'Fixes' tag is the first one that introduced the difference between internal representation and the user-provided action lists, but there were many more afterwards that lead to the situation we have today. Fixes: 7d5437c709de ("openvswitch: Add tunneling interface.") Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/20250308004609.2881861-1-i.maximets@ovn.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13gre: Fix IPv6 link-local address generation.Guillaume Nault
Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE devices in most cases and fall back to using add_v4_addrs() only in case the GRE configuration is incompatible with addrconf_addr_gen(). GRE used to use addrconf_addr_gen() until commit e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") restricted this use to gretap and ip6gretap devices, and created add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones. The original problem came when commit 9af28511be10 ("addrconf: refuse isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its addr parameter was 0. The commit says that this would create an invalid address, however, I couldn't find any RFC saying that the generated interface identifier would be wrong. Anyway, since gre over IPv4 devices pass their local tunnel address to __ipv6_isatap_ifid(), that commit broke their IPv6 link-local address generation when the local address was unspecified. Then commit e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") tried to fix that case by defining add_v4_addrs() and calling it to generate the IPv6 link-local address instead of using addrconf_addr_gen() (apart for gretap and ip6gretap devices, which would still use the regular addrconf_addr_gen(), since they have a MAC address). That broke several use cases because add_v4_addrs() isn't properly integrated into the rest of IPv6 Neighbor Discovery code. Several of these shortcomings have been fixed over time, but add_v4_addrs() remains broken on several aspects. In particular, it doesn't send any Router Sollicitations, so the SLAAC process doesn't start until the interface receives a Router Advertisement. Also, add_v4_addrs() mostly ignores the address generation mode of the interface (/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases. Fix the situation by using add_v4_addrs() only in the specific scenario where the normal method would fail. That is, for interfaces that have all of the following characteristics: * run over IPv4, * transport IP packets directly, not Ethernet (that is, not gretap interfaces), * tunnel endpoint is INADDR_ANY (that is, 0), * device address generation mode is EUI64. In all other cases, revert back to the regular addrconf_addr_gen(). Also, remove the special case for ip6gre interfaces in add_v4_addrs(), since ip6gre devices now always use addrconf_addr_gen() instead. Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/559c32ce5c9976b269e6337ac9abb6a96abe5096.1741375285.git.gnault@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13net: hsr: Add KUnit test for PRPJaakko Karrenpalo
Add unit tests for the PRP duplicate detection Signed-off-by: Jaakko Karrenpalo <jkarrenpalo@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250307161700.1045-2-jkarrenpalo@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13net: hsr: Fix PRP duplicate detectionJaakko Karrenpalo
Add PRP specific function for handling duplicate packets. This is needed because of potential L2 802.1p prioritization done by network switches. The L2 prioritization can re-order the PRP packets from a node causing the existing implementation to discard the frame(s) that have been received 'late' because the sequence number is before the previous received packet. This can happen if the node is sending multiple frames back-to-back with different priority. Signed-off-by: Jaakko Karrenpalo <jkarrenpalo@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250307161700.1045-1-jkarrenpalo@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13netfilter: nft_exthdr: fix offset with ipv4_find_option()Alexey Kashavkin
There is an incorrect calculation in the offset variable which causes the nft_skb_copy_to_reg() function to always return -EFAULT. Adding the start variable is redundant. In the __ip_options_compile() function the correct offset is specified when finding the function. There is no need to add the size of the iphdr structure to the offset. Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options") Signed-off-by: Alexey Kashavkin <akashavkin@gmail.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-03-12net: drop rtnl_lock for queue_mgmt operationsStanislav Fomichev
All drivers that use queue API are already converted to use netdev instance lock. Move netdev instance lock management to the netlink layer and drop rtnl_lock. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Mina Almasry. <almasrymina@google.com> Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12net: add granular lock for the netdev netlink socketStanislav Fomichev
As we move away from rtnl_lock for queue ops, introduce per-netdev_nl_sock lock. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250311144026.4154277-3-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12net: create netdev_nl_sock to wrap bindings listStanislav Fomichev
No functional changes. Next patches will add more granular locking to netdev_nl_sock. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250311144026.4154277-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12eth: bnxt: switch to netif_closeStanislav Fomichev
All (error) paths that call dev_close are already holding instance lock, so switch to netif_close to avoid the deadlock. v2: - add missing EXPORT_MODULE for netif_close Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12net: revert to lockless TC_SETUP_BLOCK and TC_SETUP_FTStanislav Fomichev
There is a couple of places from which we can arrive to ndo_setup_tc with TC_SETUP_BLOCK/TC_SETUP_FT: - netlink - netlink notifier - netdev notifier Locking netdev too deep in this call chain seems to be problematic (especially assuming some/all of the call_netdevice_notifiers NETDEV_UNREGISTER) might soon be running with the instance lock). Revert to lockless ndo_setup_tc for TC_SETUP_BLOCK/TC_SETUP_FT. NFT framework already takes care of most of the locking. Document the assumptions. ndo_setup_tc TC_SETUP_BLOCK nft_block_offload_cmd nft_chain_offload_cmd nft_flow_block_chain nft_flow_offload_chain nft_flow_rule_offload_abort nft_flow_rule_offload_commit nft_flow_rule_offload_commit nf_tables_commit nfnetlink_rcv_batch nfnetlink_rcv_skb_batch nfnetlink_rcv nft_offload_netdev_event NETDEV_UNREGISTER notifier ndo_setup_tc TC_SETUP_FT nf_flow_table_offload_cmd nf_flow_table_offload_setup nft_unregister_flowtable_hook nft_register_flowtable_net_hooks nft_flowtable_update nf_tables_newflowtable nfnetlink_rcv_batch (.call NFNL_CB_BATCH) nft_flowtable_update nf_tables_newflowtable nft_flowtable_event nf_tables_flowtable_event NETDEV_UNREGISTER notifier __nft_unregister_flowtable_net_hooks nft_unregister_flowtable_net_hooks nf_tables_commit nfnetlink_rcv_batch (.call NFNL_CB_BATCH) __nf_tables_abort nf_tables_abort nfnetlink_rcv_batch __nft_release_hook __nft_release_hooks nf_tables_pre_exit_net -> module unload nft_rcv_nl_event netlink_register_notifier (oh boy) nft_register_flowtable_net_hooks nft_flowtable_update nf_tables_newflowtable nf_tables_newflowtable Fixes: c4f0f30b424e ("net: hold netdev instance lock during nft ndo_setup_tc") Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reported-by: syzbot+0afb4bcf91e5a1afdcad@syzkaller.appspotmail.com Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250308044726.1193222-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12netfilter: conntrack: Bound nf_conntrack sysctl writesNicolas Bouchinet
nf_conntrack_max and nf_conntrack_expect_max sysctls were authorized to be written any negative value, which would then be stored in the unsigned int variables nf_conntrack_max and nf_ct_expect_max variables. While the do_proc_dointvec_conv function is supposed to limit writing handled by proc_dointvec proc_handler to INT_MAX. Such a negative value being written in an unsigned int leads to a very high value, exceeding this limit. Moreover, the nf_conntrack_expect_max sysctl documentation specifies the minimum value is 1. The proc_handlers have thus been updated to proc_dointvec_minmax in order to specify the following write bounds : * Bound nf_conntrack_max sysctl writings between SYSCTL_ZERO and SYSCTL_INT_MAX. * Bound nf_conntrack_expect_max sysctl writings between SYSCTL_ONE and SYSCTL_INT_MAX as defined in the sysctl documentation. With this patch applied, sysctl writes outside the defined in the bound will thus lead to a write error : ``` sysctl -w net.netfilter.nf_conntrack_expect_max=-1 sysctl: setting key "net.netfilter.nf_conntrack_expect_max": Invalid argument ``` Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit (git 2.34.1) at 2025-07-14 19:51:22 +0000