summaryrefslogtreecommitdiff
path: root/rust
AgeCommit message (Collapse)Author
2025-01-10rust: kernel: move `build_error` hidden function to prevent mistakesMiguel Ojeda
Users were using the hidden exported `kernel::build_error` function instead of the intended `kernel::build_error!` macro, e.g. see the previous commit. To force to use the macro, move it into the `build_assert` module, thus making it a compilation error and avoiding a collision in the same "namespace". Using the function now would require typing the module name (which is hidden), not just a single character. Now attempting to use the function will trigger this error with the right suggestion by the compiler: error[E0423]: expected function, found macro `kernel::build_error` --> samples/rust/rust_minimal.rs:29:9 | 29 | kernel::build_error(); | ^^^^^^^^^^^^^^^^^^^ not a function | help: use `!` to invoke the macro | 29 | kernel::build_error!(); | + An alternative would be using an alias, but it would be more complex and moving it into the module seems right since it belongs there and reduces the amount of code at the crate root. Keep the `#[doc(hidden)]` inside `build_assert` in case the module is not hidden in the future. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123222849.350287-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-10rust: use the `build_error!` macro, not the hidden functionMiguel Ojeda
Code and some examples were using the function, rather than the macro. The macro is what is documented. Thus move users to the macro. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123222849.350287-1-ojeda@kernel.org [ Applied the change to the new miscdevice cases. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-10rust: kbuild: run Clippy for `rusttest` codeMiguel Ojeda
Running Clippy for `rusttest` code is useful to catch issues there too, even if the code is not as critical. In the future, this code may also run in kernelspace and could be copy-pasted. Thus it is useful to keep it under the same standards. For instance, it will now make us add `// SAFETY` comments. It also makes everything more consistent. Thus clean the few issues spotted by Clippy and start running it. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123180639.260191-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-01-07rust: driver: address soundness issue in `RegistrationOps`Danilo Krummrich
The `RegistrationOps` trait holds some obligations to the caller and implementers. While being documented, the trait and the corresponding functions haven't been marked as unsafe. Hence, markt the trait and functions unsafe and add the corresponding safety comments. This patch does not include any fuctional changes. Reported-by: Gary Guo <gary@garyguo.net> Closes: https://lore.kernel.org/rust-for-linux/20241224195821.3b43302b.gary@garyguo.net/ Signed-off-by: Danilo Krummrich <dakr@kernel.org> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20250103164655.96590-4-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07rust: io: move module entry to its correct locationDanilo Krummrich
The module entry of `io` falsely ended up in the "use" block instead of the "mod" block, hence move it to its correct location. Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250103164655.96590-3-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07rust: pci: do not depend on CONFIG_PCI_MSIDanilo Krummrich
The PCI abstractions do not actually depend on CONFIG_PCI_MSI; it also breaks drivers that only depend on CONFIG_PCI, hence drop it. While at it, move the module entry to its correct location. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501030744.4ucqC1cB-lkp@intel.com/ Fixes: 1bd8b6b2c5d3 ("rust: pci: add basic PCI device / driver abstractions") Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250103164655.96590-2-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-03Merge tag 'wq-for-6.13-rc5-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: - Suppress a corner case spurious flush dependency warning - Two trivial changes * tag 'wq-for-6.13-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: add printf attribute to __alloc_workqueue() workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker rust: add safety comment in workqueue traits
2024-12-23rust: block: fix use of BLK_MQ_F_SHOULD_MERGEAndreas Hindborg
BLK_MQ_F_SHOULD_MERGE has was removed [1] and is now in effect by default. So remove the flag from tag sets of Rust block device drivers. Link: https://lore.kernel.org/r/20241219060214.1928848-1-hch@lst.de [1] Fixes: 9377b95cda73 ("block: remove BLK_MQ_F_SHOULD_MERGE") Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20241220-merge-flag-fix-v1-1-41b7778dac06@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-12-22Merge tag 'lockdep-for-tip.20241220' of ↵Peter Zijlstra
git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux into locking/core Lockdep changes for v6.14: - Use swap() macro in the ww_mutex test. - Minor fixes and documentation for lockdep configs on internal data structure sizes. - Some "-Wunused-function" warning fixes for Clang. Rust locking changes for v6.14: - Add Rust locking files into LOCKING PRIMITIVES maintainer entry. - Add `Lock<(), ..>::from_raw()` function to support abstraction on low level locking. - Expose `Guard::new()` for public usage and add type alias for spinlock and mutex guards. - Add lockdep checking when creating a new lock `Guard`.
2024-12-20rust: platform: add basic platform device / driver abstractionsDanilo Krummrich
Implement the basic platform bus abstractions required to write a basic platform driver. This includes the following data structures: The `platform::Driver` trait represents the interface to the driver and provides `platform::Driver::probe` for the driver to implement. The `platform::Device` abstraction represents a `struct platform_device`. In order to provide the platform bus specific parts to a generic `driver::Registration` the `driver::RegistrationOps` trait is implemented by `platform::Adapter`. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Link: https://lore.kernel.org/r/20241219170425.12036-15-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: driver: implement `Adapter`Danilo Krummrich
In order to not duplicate code in bus specific implementations (e.g. platform), implement a generic `driver::Adapter` to represent the connection of matched drivers and devices. Bus specific `Adapter` implementations can simply implement this trait to inherit generic functionality, such as matching OF or ACPI device IDs and ID table entries. Suggested-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Link: https://lore.kernel.org/r/20241219170425.12036-14-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: of: add `of::DeviceId` abstractionDanilo Krummrich
`of::DeviceId` is an abstraction around `struct of_device_id`. This is used by subsequent patches, in particular the platform bus abstractions, to create OF device ID tables. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Tested-by: Fabien Parent <fabien.parent@linaro.org> Link: https://lore.kernel.org/r/20241219170425.12036-13-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: pci: implement I/O mappable `pci::Bar`Danilo Krummrich
Implement `pci::Bar`, `pci::Device::iomap_region` and `pci::Device::iomap_region_sized` to allow for I/O mappings of PCI BARs. To ensure that a `pci::Bar`, and hence the I/O memory mapping, can't out-live the PCI device, the `pci::Bar` type is always embedded into a `Devres` container, such that the `pci::Bar` is revoked once the device is unbound and hence the I/O mapped memory is unmapped. A `pci::Bar` can be requested with (`pci::Device::iomap_region_sized`) or without (`pci::Device::iomap_region`) a const generic representing the minimal requested size of the I/O mapped memory region. In case of the latter only runtime checked I/O reads / writes are possible. Co-developed-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Link: https://lore.kernel.org/r/20241219170425.12036-11-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: pci: add basic PCI device / driver abstractionsDanilo Krummrich
Implement the basic PCI abstractions required to write a basic PCI driver. This includes the following data structures: The `pci::Driver` trait represents the interface to the driver and provides `pci::Driver::probe` for the driver to implement. The `pci::Device` abstraction represents a `struct pci_dev` and provides abstractions for common functions, such as `pci::Device::set_master`. In order to provide the PCI specific parts to a generic `driver::Registration` the `driver::RegistrationOps` trait is implemented by `pci::Adapter`. `pci::DeviceId` implements PCI device IDs based on the generic `device_id::RawDevceId` abstraction. Co-developed-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Link: https://lore.kernel.org/r/20241219170425.12036-10-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: add devres abstractionDanilo Krummrich
Add a Rust abstraction for the kernel's devres (device resource management) implementation. The Devres type acts as a container to manage the lifetime and accessibility of device bound resources. Therefore it registers a devres callback and revokes access to the resource on invocation. Users of the Devres abstraction can simply free the corresponding resources in their Drop implementation, which is invoked when either the Devres instance goes out of scope or the devres callback leads to the resource being revoked, which implies a call to drop_in_place(). Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Link: https://lore.kernel.org/r/20241219170425.12036-9-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: add `io::{Io, IoRaw}` base typesDanilo Krummrich
I/O memory is typically either mapped through direct calls to ioremap() or subsystem / bus specific ones such as pci_iomap(). Even though subsystem / bus specific functions to map I/O memory are based on ioremap() / iounmap() it is not desirable to re-implement them in Rust. Instead, implement a base type for I/O mapped memory, which generically provides the corresponding accessors, such as `Io::readb` or `Io:try_readb`. `Io` supports an optional const generic, such that a driver can indicate the minimal expected and required size of the mapping at compile time. Correspondingly, calls to the 'non-try' accessors, support compile time checks of the I/O memory offset to read / write, while the 'try' accessors, provide boundary checks on runtime. `IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or io::IoMem) which creates the actual I/O memory mapping and initializes `IoRaw` accordingly. To ensure that I/O mapped memory can't out-live the device it may be bound to, subsystems must embed the corresponding I/O memory type (e.g. pci::Bar) into a `Devres` container, such that it gets revoked once the device is unbound. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Daniel Almeida <daniel.almeida@collabora.com> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: add `Revocable` typeWedson Almeida Filho
Revocable allows access to objects to be safely revoked at run time. This is useful, for example, for resources allocated during device probe; when the device is removed, the driver should stop accessing the device resources even if another state is kept in memory due to existing references (i.e., device context data is ref-counted and has a non-zero refcount after removal of the device). Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com> Co-developed-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Link: https://lore.kernel.org/r/20241219170425.12036-7-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: types: add `Opaque::pin_init`Danilo Krummrich
Analogous to `Opaque::new` add `Opaque::pin_init`, which instead of a value `T` takes a `PinInit<T>` and returns a `PinInit<Opaque<T>>`. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Suggested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Tested-by: Fabien Parent <fabien.parent@linaro.org> Link: https://lore.kernel.org/r/20241219170425.12036-6-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: add rcu abstractionWedson Almeida Filho
Add a simple abstraction to guard critical code sections with an rcu read lock. Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com> Co-developed-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Tested-by: Fabien Parent <fabien.parent@linaro.org> Link: https://lore.kernel.org/r/20241219170425.12036-5-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: implement `IdArray`, `IdTable` and `RawDeviceId`Danilo Krummrich
Most subsystems use some kind of ID to match devices and drivers. Hence, we have to provide Rust drivers an abstraction to register an ID table for the driver to match. Generally, those IDs are subsystem specific and hence need to be implemented by the corresponding subsystem. However, the `IdArray`, `IdTable` and `RawDeviceId` types provide a generalized implementation that makes the life of subsystems easier to do so. Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Fabien Parent <fabien.parent@linaro.org> Signed-off-by: Fabien Parent <fabien.parent@linaro.org> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Tested-by: Fabien Parent <fabien.parent@linaro.org> Link: https://lore.kernel.org/r/20241219170425.12036-4-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: implement generic driver registrationDanilo Krummrich
Implement the generic `Registration` type and the `RegistrationOps` trait. The `Registration` structure is the common type that represents a driver registration and is typically bound to the lifetime of a module. However, it doesn't implement actual calls to the kernel's driver core to register drivers itself. Instead the `RegistrationOps` trait is provided to subsystems, which have to implement `RegistrationOps::register` and `RegistrationOps::unregister`. Subsystems have to provide an implementation for both of those methods where the subsystem specific variants to register / unregister a driver have to implemented. For instance, the PCI subsystem would call __pci_register_driver() from `RegistrationOps::register` and pci_unregister_driver() from `DrvierOps::unregister`. Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Tested-by: Fabien Parent <fabien.parent@linaro.org> Link: https://lore.kernel.org/r/20241219170425.12036-3-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-20rust: module: add trait `ModuleMetadata`Danilo Krummrich
In order to access static metadata of a Rust kernel module, add the `ModuleMetadata` trait. In particular, this trait provides the name of a Rust kernel module as specified by the `module!` macro. Signed-off-by: Danilo Krummrich <dakr@kernel.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Tested-by: Fabien Parent <fabien.parent@linaro.org> Link: https://lore.kernel.org/r/20241219170425.12036-2-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19rust: sync: Add lock::Backend::assert_is_held()Lyude Paul
Since we've exposed Lock::from_raw() and Guard::new() publically, we want to be able to make sure that we assert that a lock is actually held when constructing a Guard for it to handle instances of unsafe Guard::new() calls outside of our lock module. Hence add a new method assert_is_held() to Backend, which uses lockdep to check whether or not a lock has been acquired. When lockdep is disabled, this has no overhead. [Boqun: Resolve the conflicts with exposing Guard::new(), reword the commit log a bit and format "unsafe { <statement>; }" into "unsafe { <statement> }" for the consistency. ] Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20241125204139.656801-1-lyude@redhat.com
2024-12-19rust: sync: Add SpinLockGuard type aliasLyude Paul
A simple helper alias for code that needs to deal with Guard types returned from SpinLocks. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20241120222742.2490495-3-lyude@redhat.com
2024-12-19rust: sync: Add MutexGuard type aliasLyude Paul
A simple helper alias for code that needs to deal with Guard types returned from Mutexes. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20241120222742.2490495-2-lyude@redhat.com
2024-12-19rust: sync: Make Guard::new() publicLyude Paul
Since we added a `Lock::from_raw()` function previously, it makes sense to also introduce an interface for creating a `Guard` from a reference to a `Lock` for instances where we've derived the `Lock` from a raw pointer and know that the lock is already acquired, there are such usages in KMS API. [Boqun: Add backquotes to type names, reformat the commit log, reword a bit on the usage of KMS API] Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Filipe Xavier <felipe_life@live.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20241119231146.2298971-3-lyude@redhat.com
2024-12-19rust: sync: Add Lock::from_raw() for Lock<(), B>Lyude Paul
The KMS bindings [1] have a few bindings that require manually acquiring specific locks before calling certain functions. At the moment though, the only way of acquiring these locks in bindings is to simply call the C locking functions directly - since said locks are not initialized on the Rust side of things. However - if we add `#[repr(C)]` to `Lock<(), B>`, then given `()` is a ZST - `Lock<(), B>` becomes equivalent in data layout to its inner `B::State` type. Since locks in C don't have data explicitly associated with them anyway, we can take advantage of this to add a `Lock::from_raw()` function that can translate a raw pointer to `B::State` into its proper `Lock<(), B>` equivalent. This lets us simply acquire a reference to the lock in question and work with it like it was initialized on the Rust side of things, allowing us to use less unsafe code to implement bindings with lock requirements. [Boqun: Use "Link:" instead of a URL and format the commit log] Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patchwork.freedesktop.org/series/131522/ [1] Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20241119231146.2298971-2-lyude@redhat.com
2024-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h 32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure") 922b4b955a03 ("net: renesas: rswitch: rework ts tags management") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge tag 'net-6.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and netfilter. Current release - regressions: - rtnetlink: try the outer netns attribute in rtnl_get_peer_net() - rust: net::phy fix module autoloading Current release - new code bugs: - phy: avoid undefined behavior in *_led_polarity_set() - eth: octeontx2-pf: fix netdev memory leak in rvu_rep_create() Previous releases - regressions: - smc: check sndbuf_space again after NOSPACE flag is set in smc_poll - ipvs: fix clamp() of ip_vs_conn_tab on small memory systems - dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic - eth: - tun: fix tun_napi_alloc_frags() - ionic: no double destroy workqueue - idpf: trigger SW interrupt when exiting wb_on_itr mode - rswitch: rework ts tags management - team: fix feature exposure when no ports are present Previous releases - always broken: - core: fix repeated netlink messages in queue dump - mdiobus: fix an OF node reference leak - smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg - can: fix missed interrupts with m_can_pci - eth: oa_tc6: fix infinite loop error when tx credits becomes 0" * tag 'net-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) net: mctp: handle skb cleanup on sock_queue failures net: mdiobus: fix an OF node reference leak octeontx2-pf: fix error handling of devlink port in rvu_rep_create() octeontx2-pf: fix netdev memory leak in rvu_rep_create() psample: adjust size if rate_as_probability is set netdev-genl: avoid empty messages in queue dump net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic selftests: openvswitch: fix tcpdump execution net: usb: qmi_wwan: add Quectel RG255C net: phy: avoid undefined behavior in *_led_polarity_set() netfilter: ipset: Fix for recursive locking warning ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems can: m_can: fix missed interrupts with m_can_pci can: m_can: set init flag earlier in probe rtnetlink: Try the outer netns attribute in rtnl_get_peer_net(). net: netdevsim: fix nsim_pp_hold_write() idpf: trigger SW interrupt when exiting wb_on_itr mode idpf: add support for SW triggered interrupts qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate() net: ethernet: bgmac-platform: fix an OF node reference leak ...
2024-12-18rust: block: fix formatting in GenDisk docYutaro Ohno
Align bullet points and improve indentation in the `Invariants` section of the `GenDisk` struct documentation for better readability. [ Yutaro is also working on implementing the lint we suggested to catch this sort of issue in upstream Rust: https://github.com/rust-lang/rust-clippy/issues/13601 https://github.com/rust-lang/rust-clippy/pull/13711 Thanks a lot! - Miguel ] Fixes: 3253aba3408a ("rust: block: introduce `kernel::block::mq` module") Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/ZxkcU5yTFCagg_lX@ohnotp Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-18rust: alloc: align Debug implementation for Box with DisplayGuangbo Cui
Ensure consistency between `Debug` and `Display` for `Box` by updating `Debug` to match the new `Display` style. Acked-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Guangbo Cui <2407018371@qq.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/tencent_1FC0BC283DA65DD81A8A14EEF25563934E05@qq.com [ Reworded title. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-18rust: alloc: implement Display for BoxGuangbo Cui
Currently `impl Display` is missing for `Box<T, A>`, as a result, things like using `Box<..>` directly as an operand in `pr_info!()` are impossible, which is less ergonomic compared to `Box` in Rust std. Therefore add `impl Display` for `Box`. Acked-by: Danilo Krummrich <dakr@kernel.org> Suggested-by: Boqun Feng <boqun.feng@gmail.com> Link: https://github.com/Rust-for-Linux/linux/issues/1126 Signed-off-by: Guangbo Cui <2407018371@qq.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/tencent_2AD25C6A6898D3A598CBA54BB6AF59BB900A@qq.com [ Reworded title. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-18rust: sync: document `PhantomData` in `Arc`Tamir Duberstein
Add a comment explaining the relevant semantics of `PhantomData`. This should help future readers who may, as I did, assume that this field is redundant at first glance. Signed-off-by: Tamir Duberstein <tamird@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241107-simplify-arc-v2-1-7256e638aac1@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-18rust: workqueue: Enable execution of doctestsDirk Behme
Having the Rust doctests enabled these workqueue tests are built but not executed as the final callers of the print_*() functions are missing. Add them. The result is # rust_doctest_kernel_workqueue_rs_0.location: rust/kernel/workqueue.rs:35 rust_doctests_kernel: The value is: 42 ok 94 rust_doctest_kernel_workqueue_rs_0 # rust_doctest_kernel_workqueue_rs_3.location: rust/kernel/workqueue.rs:78 rust_doctests_kernel: The value is: 24 rust_doctests_kernel: The second value is: 42 ok 97 rust_doctest_kernel_workqueue_rs_3 Without this change the "The value ..." outputs are not there meaning that this test code is not run. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/cb953202-0dbe-4127-8a8e-6a75258c2116@gmail.com [ Reworded slightly. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-17rust: error: modify `from_errno` to use `try_from_errno`Daniel Sedlak
Modify the from_errno function to use try_from_errno to reduce code duplication while still maintaining all existing behavior and error handling and also reduces unsafe code. Link: https://github.com/Rust-for-Linux/linux/issues/1125 Suggested-by: Miguel Ojeda <ojeda@kernel.org> Co-developed-by: Guilherme Augusto Martins da Silva <guilhermev2huehue@gmail.com> Signed-off-by: Guilherme Augusto Martins da Silva <guilhermev2huehue@gmail.com> Signed-off-by: Daniel Sedlak <daniel@sedlak.dev> Reviewed-by: Fiona Behrens <me@kloenk.dev> Link: https://lore.kernel.org/r/20241207112445.55502-1-daniel@sedlak.dev Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-17rust: net::phy scope ThisModule usage in the module_phy_driver macroRahul Rameshbabu
Similar to the use of $crate::Module, ThisModule should be referred to as $crate::ThisModule in the macro evaluation. The reason the macro previously did not cause any errors is because all the users of the macro would use kernel::prelude::*, bringing ThisModule into scope. Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/20241214194242.19505-1-sergeantsagara@protonmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-17rust: net::phy fix module autoloadingFUJITA Tomonori
The alias symbol name was renamed. Adjust module_phy_driver macro to create the proper symbol name to fix module autoloading. Fixes: 054a9cd395a7 ("modpost: rename alias symbol for MODULE_DEVICE_TABLE()") Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Link: https://patch.msgid.link/20241212130015.238863-1-fujita.tomonori@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-16rust: cleanup unnecessary castsGary Guo
With `long` mapped to `isize`, `size_t`/`__kernel_size_t` mapped to `usize` and `char` mapped to `u8`, many of the existing casts are no longer necessary. Signed-off-by: Gary Guo <gary@garyguo.net> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240913213041.395655-6-gary@garyguo.net [ Moved `uaccess` changes to the previous commit, since they were irrefutable patterns that Rust >= 1.82.0 warns about. Removed a couple casts that now use `c""` literals. Rebased on top of `rust-next`. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-16rust: map `long` to `isize` and `char` to `u8`Gary Guo
The following FFI types are replaced compared to `core::ffi`: 1. `char` type is now always mapped to `u8`, since kernel uses `-funsigned-char` on the C code. `core::ffi` maps it to platform default ABI, which can be either signed or unsigned. 2. `long` is now always mapped to `isize`. It's very common in the kernel to use `long` to represent a pointer-sized integer, and in fact `intptr_t` is a typedef of `long` in the kernel. Enforce this mapping rather than mapping to `i32/i64` depending on platform can save us a lot of unnecessary casts. Signed-off-by: Gary Guo <gary@garyguo.net> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240913213041.395655-5-gary@garyguo.net [ Moved `uaccess` changes from the next commit, since they were irrefutable patterns that Rust >= 1.82.0 warns about. Reworded slightly and reformatted a few documentation comments. Rebased on top of `rust-next`. Added the removal of two casts to avoid Clippy warnings. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-16rust: finish using custom FFI integer typesMiguel Ojeda
In the last kernel cycle we migrated most of the `core::ffi` cases in commit d072acda4862 ("rust: use custom FFI integer types"): Currently FFI integer types are defined in libcore. This commit creates the `ffi` crate and asks bindgen to use that crate for FFI integer types instead of `core::ffi`. This commit is preparatory and no type changes are made in this commit yet. Finish now the few remaining/new cases so that we perform the actual remapping in the next commit as planned. Acked-by: Jocelyn Falempe <jfalempe@redhat.com> # drm Link: https://lore.kernel.org/rust-for-linux/CANiq72m_rg42SvZK=bF2f0yEoBLVA33UBhiAsv8THhVu=G2dPA@mail.gmail.com/ Link: https://lore.kernel.org/all/cc9253fa-9d5f-460b-9841-94948fb6580c@redhat.com/ Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-16rust: miscdevice: add fops->show_fdinfo() hookAlice Ryhl
File descriptors should generally provide a fops->show_fdinfo() hook for debugging purposes. Thus, add such a hook to the miscdevice abstractions. Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241203-miscdevice-showfdinfo-v1-1-7e990732d430@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-16rust: miscdevice: Provide accessor to pull out miscdevice::this_deviceLee Jones
There are situations where a pointer to a `struct device` will become necessary (e.g. for calling into dev_*() functions). This accessor allows callers to pull this out from the `struct miscdevice`. Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Lee Jones <lee@kernel.org> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20241210-miscdevice-file-param-v3-3-b2a79b666dc5@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-16rust: miscdevice: access the `struct miscdevice` from fops->open()Alice Ryhl
Providing access to the underlying `struct miscdevice` is useful for various reasons. For example, this allows you access the miscdevice's internal `struct device` for use with the `dev_*` printing macros. Note that since the underlying `struct miscdevice` could get freed at any point after the fops->open() call (if misc_deregister is called), only the open call is given access to it. To use `dev_*` printing macros from other fops hooks, take a refcount on `miscdevice->this_device` to keep it alive. See the linked thread for further discussion on the lifetime of `struct miscdevice`. Link: https://lore.kernel.org/r/2024120951-botanist-exhale-4845@gregkh Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Lee Jones <lee@kernel.org> Tested-by: Lee Jones <lee@kernel.org> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20241210-miscdevice-file-param-v3-2-b2a79b666dc5@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-16rust: miscdevice: access file in fopsAlice Ryhl
This allows fops to access information about the underlying struct file for the miscdevice. For example, the Binder driver needs to inspect the O_NONBLOCK flag inside the fops->ioctl() hook. Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Lee Jones <lee@kernel.org> Tested-by: Lee Jones <lee@kernel.org> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20241210-miscdevice-file-param-v3-1-b2a79b666dc5@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-10rust: kbuild: set `bindgen`'s Rust target versionMiguel Ojeda
Each `bindgen` release may upgrade the list of Rust targets. For instance, currently, in their master branch [1], the latest ones are: Nightly => { vectorcall_abi: #124485, ptr_metadata: #81513, layout_for_ptr: #69835, }, Stable_1_77(77) => { offset_of: #106655 }, Stable_1_73(73) => { thiscall_abi: #42202 }, Stable_1_71(71) => { c_unwind_abi: #106075 }, Stable_1_68(68) => { abi_efiapi: #105795 }, By default, the highest stable release in their list is used, and users are expected to set one if they need to support older Rust versions (e.g. see [2]). Thus, over time, new Rust features are used by default, and at some point, it is likely that `bindgen` will emit Rust code that requires a Rust version higher than our minimum (or perhaps enabling an unstable feature). Currently, there is no problem because the maximum they have, as seen above, is Rust 1.77.0, and our current minimum is Rust 1.78.0. Therefore, set a Rust target explicitly now to prevent going forward in time too much and thus getting potential build failures at some point. Since we also support a minimum `bindgen` version, and since `bindgen` does not support passing unknown Rust target versions, we need to use the list of our minimum `bindgen` version, rather than the latest. So, since `bindgen` 0.65.1 had this list [3], we need to use Rust 1.68.0: /// Rust stable 1.64 /// * `core_ffi_c` ([Tracking issue](https://github.com/rust-lang/rust/issues/94501)) => Stable_1_64 => 1.64; /// Rust stable 1.68 /// * `abi_efiapi` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/65815)) => Stable_1_68 => 1.68; /// Nightly rust /// * `thiscall` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/42202)) /// * `vectorcall` calling convention (no tracking issue) /// * `c_unwind` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/74990)) => Nightly => nightly; ... /// Latest stable release of Rust pub const LATEST_STABLE_RUST: RustTarget = RustTarget::Stable_1_68; Thus add the `--rust-target 1.68` parameter. Add a comment as well explaining this. An alternative would be to use the currently running (i.e. actual) `rustc` and `bindgen` versions to pick a "better" Rust target version. However, that would introduce more moving parts depending on the user setup and is also more complex to implement. Starting with `bindgen` 0.71.0 [4], we will be able to set any future Rust version instead, i.e. we will be able to set here our minimum supported Rust version. Christian implemented it [5] after seeing this patch. Thanks! Cc: Christian Poveda <git@pvdrz.com> Cc: Emilio Cobos Álvarez <emilio@crisal.io> Cc: stable@vger.kernel.org # needed for 6.12.y; unneeded for 6.6.y; do not apply to 6.1.y Fixes: c844fa64a2d4 ("rust: start supporting several `bindgen` versions") Link: https://github.com/rust-lang/rust-bindgen/blob/21c60f473f4e824d4aa9b2b508056320d474b110/bindgen/features.rs#L97-L105 [1] Link: https://github.com/rust-lang/rust-bindgen/issues/2960 [2] Link: https://github.com/rust-lang/rust-bindgen/blob/7d243056d335fdc4537f7bca73c06d01aae24ddc/bindgen/features.rs#L131-L150 [3] Link: https://github.com/rust-lang/rust-bindgen/blob/main/CHANGELOG.md#0710-2024-12-06 [4] Link: https://github.com/rust-lang/rust-bindgen/pull/2993 [5] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123180323.255997-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-12-04rust: replace lsm context+len with lsm_contextAlice Ryhl
This brings the Rust SecurityCtx abstraction [1] up to date with the new API where context+len is replaced with an lsm_context [2] struct. Link: https://lore.kernel.org/r/20240915-alice-file-v10-5-88484f7a3dcf@google.com [1] Link: https://lore.kernel.org/r/20241023212158.18718-3-casey@schaufler-ca.com [2] Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Closes: https://lore.kernel.org/r/CA+G9fYv_Y2tzs+uYhMGtfUK9dSYV2mFr6WyKEzJazDsdk9o5zw@mail.gmail.com Signed-off-by: Alice Ryhl <aliceryhl@google.com> [PM: subj line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-12-03rust: add safety comment in workqueue traitsKonstantin Andrikopoulos
Add missing safety comments for the implementation of the unsafe traits WorkItemPointer and RawWorkItem for Arc<T> in workqueue.rs Link: https://github.com/Rust-for-Linux/linux/issues/351. Co-developed-by: Vangelis Mamalakis <mamalakis@google.com> Signed-off-by: Vangelis Mamalakis <mamalakis@google.com> Suggested-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Konstantin Andrikopoulos <kernel@mandragore.io> Signed-off-by: Tejun Heo <tj@kernel.org>
2024-11-30Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linuxLinus Torvalds
Pull more block updates from Jens Axboe: - NVMe pull request via Keith: - Use correct srcu list traversal (Breno) - Scatter-gather support for metadata (Keith) - Fabrics shutdown race condition fix (Nilay) - Persistent reservations updates (Guixin) - Add the required bits for MD atomic write support for raid0/1/10 - Correct return value for unknown opcode in ublk - Fix deadlock with zone revalidation - Fix for the io priority request vs bio cleanups - Use the correct unsigned int type for various limit helpers - Fix for a race in loop - Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make it easier for actual humans to read - Fix potential UAF when iterating tags - A few fixes for bfq-iosched UAF issues - Fix for brd discard not decrementing the allocated page count - Various little fixes and cleanups * tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits) brd: decrease the number of allocated pages which discarded block, bfq: fix bfqq uaf in bfq_limit_depth() block: Don't allow an atomic write be truncated in blkdev_write_iter() mq-deadline: don't call req_get_ioprio from the I/O completion handler block: Prevent potential deadlock in blk_revalidate_disk_zones() block: Remove extra part pointer NULLify in blk_rq_init() nvme: tuning pr code by using defined structs and macros nvme: introduce change ptpl and iekey definition block: return bool from get_disk_ro and bdev_read_only block: remove a duplicate definition for bdev_read_only block: return bool from blk_rq_aligned block: return unsigned int from blk_lim_dma_alignment_and_pad block: return unsigned int from queue_dma_alignment block: return unsigned int from bdev_io_opt block: req->bio is always set in the merge code block: don't bother checking the data direction for merges block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()" md/raid10: Atomic write support md/raid1: Atomic write support ...
2024-11-30Merge tag 'kbuild-v6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add generic support for built-in boot DTB files - Enable TAB cycling for dialog buttons in nconfig - Fix issues in streamline_config.pl - Refactor Kconfig - Add support for Clang's AutoFDO (Automatic Feedback-Directed Optimization) - Add support for Clang's Propeller, a profile-guided optimization. - Change the working directory to the external module directory for M= builds - Support building external modules in a separate output directory - Enable objtool for *.mod.o and additional kernel objects - Use lz4 instead of deprecated lz4c - Work around a performance issue with "git describe" - Refactor modpost * tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits) kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms gitignore: Don't ignore 'tags' directory kbuild: add dependency from vmlinux to resolve_btfids modpost: replace tdb_hash() with hash_str() kbuild: deb-pkg: add python3:native to build dependency genksyms: reduce indentation in export_symbol() modpost: improve error messages in device_id_check() modpost: rename alias symbol for MODULE_DEVICE_TABLE() modpost: rename variables in handle_moddevtable() modpost: move strstarts() to modpost.h modpost: convert do_usb_table() to a generic handler modpost: convert do_of_table() to a generic handler modpost: convert do_pnp_device_entry() to a generic handler modpost: convert do_pnp_card_entries() to a generic handler modpost: call module_alias_printf() from all do_*_entry() functions modpost: pass (struct module *) to do_*_entry() functions modpost: remove DEF_FIELD_ADDR_VAR() macro modpost: deduplicate MODULE_ALIAS() for all drivers modpost: introduce module_alias_printf() helper modpost: remove unnecessary check in do_acpi_entry() ...
2024-11-29Merge tag 'char-misc-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc/IIO/whatever driver subsystem updates from Greg KH: "Here is the 'big and hairy' char/misc/iio and other small driver subsystem updates for 6.13-rc1. Loads of things in here, and even a fun merge conflict! - rust misc driver bindings and other rust changes to make misc drivers actually possible. I think this is the tipping point, expect to see way more rust drivers going forward now that these bindings are present. Next merge window hopefully we will have pci and platform drivers working, which will fully enable almost all driver subsystems to start accepting (or at least getting) rust drivers. This is the end result of a lot of work from a lot of people, congrats to all of them for getting this far, you've proved many of us wrong in the best way possible, working code :) - IIO driver updates, too many to list individually, that subsystem keeps growing and growing... - Interconnect driver updates - nvmem driver updates - pwm driver updates - platform_driver::remove() fixups, loads of them - counter driver updates - misc driver updates (keba?) - binder driver updates and fixes - loads of other small char/misc/etc driver updates and additions, full details in the shortlog. All of these have been in linux-next for a while, with no other reported issues other than that merge conflict" * tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits) mei: vsc: Fix typo "maintstepping" -> "mainstepping" firmware: Switch back to struct platform_driver::remove() misc: isl29020: Fix the wrong format specifier scripts/tags.sh: Don't tag usages of DEFINE_MUTEX fpga: Switch back to struct platform_driver::remove() mei: vsc: Improve error logging in vsc_identify_silicon() mei: vsc: Do not re-enable interrupt from vsc_tp_reset() dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188 spmi: pmic-arb: fix return path in for_each_available_child_of_node() iio: Move __private marking before struct element priv in struct iio_dev docs: iio: ad7380: add adaq4370-4 and adaq4380-4 iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4 iio: adc: ad7380: use local dev variable to shorten long lines iio: adc: ad7380: fix oversampling formula dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian misc: atmel-ssc: Use of_property_present() for non-boolean properties misc: keba: Add hardware dependency ...
generated by cgit (git 2.34.1) at 2025-05-11 18:35:06 +0000