| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last PR for 6.13. This became bigger than wished due to
the timing after holiday breaks.
The only large LOC is the additional document for Cirrus codec which
is nice for users (and absolutely safe). All the rest are small fixes
in ASoC Rcar and codecs as well as HD-audio quirks (And no fix for USB
guitar pedals seen yet :)"
* tag 'sound-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix volume adjustment issue on Lenovo ThinkBook 16P Gen5
ALSA: hda/realtek: fixup ASUS H7606W
ALSA: hda/realtek: fixup ASUS GA605W
ALSA: hda/realtek: Add support for Ayaneo System using CS35L41 HDA
ASoC: rsnd: check rsnd_adg_clk_enable() return value
ASoC: cs42l43: Add codec force suspend/resume ops
ALSA: doc: Add codecs/index.rst to top-level index
ALSA: doc: cs35l56: Add information about Cirrus Logic CS35L54/56/57
ASoC: samsung: Add missing depends on I2C
MAINTAINERS: add missing maintainers for Simple Audio Card
ASoC: samsung: Add missing selects for MFD_WM8994
ASoC: codecs: es8316: Fix HW rate calculation for 48Mhz MCLK
ASoC: wm8994: Add depends on MFD core
ASoC: tas2781: Fix occasional calibration failture
ASoC: codecs: ES8326: Adjust ANA_MICBIAS to reduce pop noise
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
On i.MX943, the FIFO data address is changed and the bit width
of CICOSR is changed.
Add a new compatible string and update driver for these changes.
|
|
In the original change, rawmidi_info.tied_device showed -1 for the
unknown or untied device. But this would require the user-space to
check the protocol version and judge the value conditionally, which
is rather error-prone.
Instead, set the tied_device = 0 to be default as unknown, and
indicate the real device with the offset 1, for achieving more
backward compatibility.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250114104711.19197-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Clean up error handling by using the new devm_
clock and reset functions. This should make it
easier to add new code, as we can eliminate the
"goto ladder" in probe().
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250114095909.798559-1-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dapm is setup by snd_soc_dapm_init(), thus dapm->card never been NULL.
We don't need if (!card) check for it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877c6ytd9t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On i.MX943, the FIFO data address is changed to 0x20~0x3c,
compared to previous version, there is a minus 4 offset,
so add a new regmap configuration for it.
And the bit width of CICOSR is changed to 5 bits, from bit
16th to 20th in REG_MICFIL_CTRL2 register, so update its
definition header file.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250114102720.3664667-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
Andi is unavailable for some time. So, I take over his work for this
mergewindow.
|
|
Loongson's HDA devices do not support TCSEL functionality.
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Link: https://patch.msgid.link/20250114080700.23029-1-zhaoqunqin@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current clock provider/consumer setting is set by dai_link->dai_fmt, and it
is Codec base on Sound Card driver (= SND_SOC_DAIFMT_CBx_CFx).
Current CPU/Codec drivers are already based on its own base
(= SND_SOC_DAIFMT_Bx_Fx). So, Codec clock setting uses dai_link->dai_fmt
as-is, and CPU side clock setting is created from Codec base setting by
flipping. Because of this, we can't set both CPU/Codec clock consumer for
example.
To solve this issue, this patch-set adds new ext_fmt on each DAI.
It can keep compatible with legacy style.
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
dai_fmt : dai_link->dai_fmt = common settings
ext_fmt : each DAI settings
Legacy
dai_fmt includes 1, 2, 3, 4
New style
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Audio-Graph-Card2 will use this new style by this patch-set.
By this patch, Card2 default behavior (= no "clock-master / frame-master"
settings on DT) will be changed, but no drivers are using it.
In case of no DAI has "clock-master / frame-master" property on DT,
it will be...
Legacy
CPU : provider (because flipped from Codec)
Codec: consumer
New style
CPU : consumer
Codec: consumer
One note is that Simple-Card, Audio-Graph-Card don't implement
this new style to keep compatiblily.
In Overlay case, port order can be random, so we shouldn't use get_next()
function to get next port.
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
There are two MQS instances on the i.MX943 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
|
|
Use the ARRAY_SIZE() macro to calculate PEB2466_TLV_SIZE and improve the
code's readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20250113001001.400669-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250107110900.3716-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch uses extra format for each DAI which can
keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87pll0o5j6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch enable to use extra format for each
DAI which can keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87r05go5ja.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
graph_get_next_multi_ep()
Audio Graph Card2 is assuming "port" are necessarily in order, but there
is no guarantee in case of overlay. Use of_graph_get_port_by_id() instead
to handle it correctly.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87sepwo5jf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_daifmt_parse_clock_provider_raw()
snd_soc_daifmt_parse_clock_provider_raw() might be called with NULL np.
Return 0 in such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87ttaco5jm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
simple-card handles many type of device_node, thus need to
use of_node_put() in many place. Let's use __free(device_node)
and avoid it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87v7uso5js.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph-card handles many type of device_node, thus need to
use of_node_put() in many place. Let's use __free(device_node)
and avoid it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87wmf8o5k1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph-card2 handles many type of device_node, thus need to
use of_node_put() in many place. Let's use __free(device_node)
and avoid it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87y0zoo5kc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no audio output if Speaker volume is set above 25.
According to datasheet Rev 2.5 maximum allowed value for the
Speaker output is 0b11001 (25)
0x6D CLASSD_GAIN_1/ 0x6E CLASSD_GAIN_2:
Left/Right Channel Class-D Driver Gain For DAC Left/Right
Input
(Step size is 1dB.)
00000 = Mute (DEFAULT)
00001 = 0dB
00002 = 1dB
...
11000 = 23dB
11001 = 24dB
So adjust this value in accordance with the datasheet.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://patch.msgid.link/20241219042227.7075-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are two MQS instances on the i.MX943 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
On i.MX943 one instance is in Always-on mix, another is in
Wakeup-mix.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250113090321.3193464-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes the volume adjustment issue on the Lenovo ThinkBook 16P Gen5
by applying the necessary quirk configuration for the Realtek ALC287 codec.
The issue was caused by incorrect configuration in the driver,
which prevented proper volume control on certain systems.
Signed-off-by: Yage Geng <icoderdev@gmail.com>
Link: https://patch.msgid.link/20250113085208.15351-1-icoderdev@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-19-ddfefd7e9f2a@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jeff Johnson <jjohnson@kernel.org>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Praveen Kaligineedi <pkaligineedi@google.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Shailend Chand <shailend@google.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Simon Horman <horms@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed. This is no ideal
behavior.
This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port. The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).
The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.
The sequencer protocol version is bumped to 1.0.5 along with it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
|
|
Currently the system notification helper assumes only the non-atomic
delivery. For allowing an event delivery in non-atomic context, add
the atomic flag to the helper function.
This is a preliminary change for the support of UMP EP/FB
notification.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-8-tiwai@suse.de
|
|
The rawmidi name string should be updated dynamically when the device
receives the UMP EP name update, too. Both the core and legacy
rawmidi names are updated.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-7-tiwai@suse.de
|
|
The UMP helper didn't set up the rawmidi name string by itself but
left it to the driver. But since the only user (USB MIDI2 driver)
picks up the UMP info name string to the rawmidi name as default, it's
better to set up in the UMP core side.
Meanwhile, UMP receives the EP name string from the device, and it
might contain garbage letters. We should purify the string to be
usable for the kernel as done previously for UMP Group names.
This implements the copy of the UMP info name string into the rawmidi
name at the creation of UMP EP object in a safe way to strip the
non-ASCII or non-printable characters. Also, change the reference
from the legacy rawmidi and other places to rawmidi name field instead
of ump info; this assures the sane strings.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-6-tiwai@suse.de
|
|
The UMP group names are referred as the corresponding sequencer port
names, hence they should be proper ASCII strings. OTOH, the UMP group
names are composed from the UMP FB strings that are received from the
device; i.e. a device may give some bogus letters and we can't trust
them fully.
To assure that the group names consist of the proper ASCII strings,
replace the normal string copy and append operations with special ones
that strip the non-printable letters.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-5-tiwai@suse.de
|
|
The UMP legacy rawmidi may turn on/off the substream dynamically
depending on the UMP Function Block information. So far, there was no
direct way to know whether the substream is disabled (inactive) or
not; at most one can take a look at the substream name string or try
to open and get -ENODEV.
This patch extends the rawmidi info ioctl to show the current inactive
state of the given substream. When the selected substream is
inactive, info flags field contains the new bit flag
SNDRV_RAWMIDI_INFO_STREAM_INACTIVE.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
|
|
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently
there is no way to know which device is involved in other side.
This patch extends the rawmidi info ioctl to show the tied device
number. As default it stores -1, indicating that no tied device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
|
|
The H7606W laptop has almost the exact same codec setup as the GA403
and so the same quirks apply to it.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250111022754.177551-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The GA605W laptop has almost the exact same codec setup as the GA403
and so the same quirks apply to it.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250111022754.177551-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The snd_hdac_adsp_xxx() wrap snd_hdac_reg_xxx() helpers to simplify
register access for AudioDSP drivers e.g.: the avs-driver. Byte- and
word-variants of said helps do not expand to bare readx/writex()
operations but functions instead and, due to pointer type
incompatibility, cause compilation to fail.
As the macros are utilized by the avs-driver alone, relocate the code
introduced with commit c19bd02e9029 ("ALSA: hda: Add helper macros for
DSP capable devices") into the avs/ directory and update it to operate
on 'adev' i.e.: the avs-driver-context directly to fix the issue.
Fixes: c19bd02e9029 ("ALSA: hda: Add helper macros for DSP capable devices")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250110113326.3809897-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
presence check
It doesn't matter whether "dai-tdm-slot-width-map" is not present or
there is some other issue parsing it in of_property_count_elems_of_size()
causing an error. Drop the presence check and rely on
of_property_count_elems_of_size() error return if not present.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250109182202.3971965-2-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A collection of device specific fixes that came in over the holidays,
plus a MAINTAINERS update and some documentation to help users debug
problems with some of the Cirrus CODECs found in modern laptops.
|
|
Remove hard-coded strings by using the str_enabled_disabled() helper
function.
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250109230521.237162-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250109223809.198582-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for Ayaneo Portable Game System.
System use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250109165455.645810-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This backmerges Linux 6.13-rc6 this is need for the newer pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250109182303.3973082-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As reported by the kernel test robot, the following error occurs:
sound/soc/amd/yc/acp6x-mach.c: In function 'acp6x_probe':
>> sound/soc/amd/yc/acp6x-mach.c:573:15: error: implicit declaration of function 'acpi_evaluate_integer'; did you mean 'acpi_evaluate_object'? [-Werror=implicit-function-declaration]
573 | ret = acpi_evaluate_integer(handle, "_WOV", NULL, &dmic_status);
| ^~~~~~~~~~~~~~~~~~~~~
| acpi_evaluate_object
cc1: some warnings being treated as errors
The function 'acpi_evaluate_integer' and its prototype in 'acpi_bus.h'
are only available when 'CONFIG_ACPI' is enabled. Add a 'depends on ACPI'
directive in Kconfig to ensure proper compilation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501090345.pBIDRTym-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patch.msgid.link/20250109171547.362412-1-eleanor15x@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC framwork has disable_route_checks flag. Intel is the last user of it,
but it seems it exists in dead code. So we can remove it.
|
|
Use the standard helper for simplifying the code.
Merely cleanup, no behavior change.
Link: https://patch.msgid.link/20250109162318.9172-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the standard helper for simplifying the code.
Merely cleanup, no behavior change.
Link: https://patch.msgid.link/20250109162318.9172-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A set of loosely connected changes, fixing few outstanding issues as
well as improving readability of the existing code.
The fixes lead the series, first five patches. The goal is to make sure
proper read() is used when accessing the registers, probe() and remove()
sequences for HDAudio streaming are synced, minimal AudioDSP firmware
version points to correct values and recent additions to the topology
are parsed properly.
The only patch that points to 'new functionality' is:
ASoC: Intel: avs: Update ASRC definition
as with the struct definition updates, one can utilize the ASRC module
in both streaming directions now (previously limited to Capture).
Everything else either improves the logging or provides comments vital
for long-term maintenance of the code.
|
|
No driver is using disable_route_checks, let's remove it.
Because snd_soc_dapm_add_routes() itself will indicate detail error
when failed, this patch removes duplicate dev_err() not only
dev_warn() in error case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/87tta8268e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It sets disable_route_checks flag after checking that parent driver
isn't SOF, but skylake driver was removed, so it is dead code.
We can remove last user of disable_route_checks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Suggested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/87v7uo268m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rsnd_adg_clk_enable() might be failed for some reasons, but it doesn't
check return value for now. In such case, we might get below WARNING from
clk_disable() during probe or suspend. Check rsnd_adg_clk_enable() return
value.
clk_multiplier already disabled
...
Call trace:
clk_core_disable+0xd0/0xd8 (P)
clk_disable+0x2c/0x44
rsnd_adg_clk_control+0x80/0xf4
According to Geert, it happened only 7 times during the last 2 years.
So I have reproduced the issue and created patch by Intentionally making
an error.
Link: https://lore.kernel.org/r/CAMuHMdVUKpO2rsia+36BLFFwdMapE8LrYS0duyd0FmrxDvwEfg@mail.gmail.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87seps2522.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The debugfs file utilizes string helpers such as parse_int_array_user()
yet does not include the header.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250109122216.3667847-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The firmware status and the firmware error registers are 4-bytes wide.
Update trace macros and their usage to reflect that.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250109122216.3667847-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
