| Age | Commit message (Collapse) | Author |
|---|
|
The code uses the initialised member of the asoc_sdw_dailink struct to
determine if a member of the array is in use. However in the case the
array is completely full this will lead to an access 1 past the end of
the array, expand the array by one entry to include a space for a
terminator.
Fixes: 27fd36aefa00 ("ASoC: Intel: sof-sdw: Add new code for parsing the snd_soc_acpi structs")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212105742.1508574-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As the snd_soc_card_get_kcontrol() is updated to use
snd_ctl_find_id_mixer() in
commit 897cc72b0837 ("ASoC: soc-card: Use
snd_ctl_find_id_mixer() instead of open-coding")
which make the iface fix to be IFACE_MIXER.
Fixes: 897cc72b0837 ("ASoC: soc-card: Use snd_ctl_find_id_mixer() instead of open-coding")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20241126053254.3657344-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As the snd_soc_card_get_kcontrol() is updated to use
snd_ctl_find_id_mixer() in
commit 897cc72b0837 ("ASoC: soc-card: Use
snd_ctl_find_id_mixer() instead of open-coding")
which make the iface fix to be IFACE_MIXER.
Fixes: 897cc72b0837 ("ASoC: soc-card: Use snd_ctl_find_id_mixer() instead of open-coding")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20241126053254.3657344-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
One specific test condition: the default registers of p[j].reg ~
p[j+3].reg are 0, TASDEVICE_REG(0x00, 0x14, 0x38)(PLT_FLAG_REG),
TASDEVICE_REG(0x00, 0x14, 0x40)(SINEGAIN_REG), and
TASDEVICE_REG(0x00, 0x14, 0x44)(SINEGAIN2_REG). After first calibration,
they are freshed to TASDEVICE_REG(0x00, 0x1a, 0x20), TASDEVICE_REG(0x00,
0x16, 0x58)(PLT_FLAG_REG), TASDEVICE_REG(0x00, 0x14, 0x44)(SINEGAIN_REG),
and TASDEVICE_REG(0x00, 0x16, 0x64)(SINEGAIN2_REG) via "Calibration Start"
kcontrol. In second calibration, the p[j].reg ~ p[j+3].reg have already
become tas2781_cali_start_reg. However, p[j+2].reg, TASDEVICE_REG(0x00,
0x14, 0x44)(SINEGAIN_REG), will be freshed to TASDEVICE_REG(0x00, 0x16,
0x64), which is the third register in the input params of the kcontrol.
This is why only first calibration can work, the second-time, third-time
or more-time calibration always failed without reboot. Of course, if no
p[j].reg is in the list of tas2781_cali_start_reg, this stress test can
work well.
Fixes: 49e2e353fb0d ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20241211043859.1328-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove hard-coded strings by using the str_on_off() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20241210172428.139643-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The SSIF-2 IP is available on the Renesas RZ/G3S SoC. The Renesas RZ/G3S
SoC supports a power-saving mode where power to most of the SoC
components is turned off. Add suspend/resume support to the SSIF-2 driver
to support this power-saving mode.
On SNDRV_PCM_TRIGGER_SUSPEND trigger the SSI is stopped (the stream
user pointer is left untouched to avoid breaking user space and the dma
buffer pointer is set to zero), on SNDRV_PCM_TRIGGER_RESUME software reset
is issued for the SSIF-2 IP and the clocks are re-configured.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-18-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The code initially issued software reset on SNDRV_PCM_TRIGGER_START
action only before starting the first stream. This can be easily moved to
hw_params() as the action is similar to setting the clocks. Moreover,
according to the hardware manual (Table 35.7 Bits Initialized by Software
Reset of the SSIFCR.SSIRST Bit) the software reset action acts also on the
clock dividers bits. Due to this issue the software reset in hw_params()
before configuring the clock dividers. This also simplifies the code in
trigger API.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-17-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add runtime PM support to the ssi driver. This assert/de-assert the
reset lines on runtime suspend/resume. Along with it the de-assertion of
the reset line from probe function was removed as it is not necessary
anymore.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-16-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable runtime PM autosuspend support. The chosen autosuspend delay is
zero for immediate autosuspend. In case there are users that need a
different autosuspend delay, it can be adjusted through sysfs.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-15-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
the SSI
The ASoC subsystem takes care of runtime resume/suspend the audio
devices when needed. Just enable the runtime PM on the SSI driver and
let the subsystem runtime resume/suspend it. While at it use directly
the devm_pm_runtime_enable().
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-14-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use goto label names that specify their action. In this way we can have
a better understanding of what is the action associated with the label
by just reading the label name.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-13-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use a temporary variable for the struct device pointers to avoid
dereferencing.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-12-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use readl_poll_timeout_atomic() instead of hardcoding something similar.
While at it replace dev_info() with dev_warn_ratelimited() as the
rz_ssi_set_idle() can also be called from IRQ context and if the SSI
idle is not properly set this is at least a warning for user.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-11-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The first argument of the rz_ssi_stream_is_play() is not used. Remove it.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-10-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the rz_ssi_get_dai() function and use directly the
snd_soc_rtd_to_cpu() where needed or the struct device pointer embedded
in the struct rz_ssi_priv objects.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-9-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the pdev member of struct rz_ssi_priv as it is not used.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-8-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SSI_RATES macro covers 8KHz-48KHz audio frequencies. Update macro
comment to reflect it.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241210170953.2936724-7-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to populate the ckdv[] with invalid dividers as that
part will not be indexed anyway. The ssi->audio_mck/bclk_rate should
always be >= 0. While at it, change the ckdv type as u8, as the divider
128 was previously using the s8 sign bit.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Fixes: 03e786bd43410fa9 ("ASoC: sh: Add RZ/G2L SSIF-2 driver")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20241210170953.2936724-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The stop trigger invokes rz_ssi_stop() and rz_ssi_stream_quit().
- The purpose of rz_ssi_stop() is to disable TX/RX, terminate DMA
transactions, and set the controller to idle.
- The purpose of rz_ssi_stream_quit() is to reset the substream-specific
software data by setting strm->running and strm->substream appropriately.
The function rz_ssi_is_stream_running() checks if both strm->substream and
strm->running are valid and returns true if so. Its implementation is as
follows:
static inline bool rz_ssi_is_stream_running(struct rz_ssi_stream *strm)
{
return strm->substream && strm->running;
}
When the controller is configured in full-duplex mode (with both playback
and capture active), the rz_ssi_stop() function does not modify the
controller settings when called for the first substream in the full-duplex
setup. Instead, it simply sets strm->running = 0 and returns if the
companion substream is still running. The following code illustrates this:
static int rz_ssi_stop(struct rz_ssi_priv *ssi, struct rz_ssi_stream *strm)
{
strm->running = 0;
if (rz_ssi_is_stream_running(&ssi->playback) ||
rz_ssi_is_stream_running(&ssi->capture))
return 0;
// ...
}
The controller settings, along with the DMA termination (for the last
stopped substream), are only applied when the last substream in the
full-duplex setup is stopped.
While applying the controller settings only when the last substream stops
is not problematic, terminating the DMA operations for only one substream
causes failures when starting and stopping full-duplex operations multiple
times in a loop.
To address this issue, call dmaengine_terminate_async() for both substreams
involved in the full-duplex setup when the last substream in the setup is
stopped.
Fixes: 4f8cd05a4305 ("ASoC: sh: rz-ssi: Add full duplex support")
Cc: stable@vger.kernel.org
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20241210170953.2936724-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These patches tidyup simple-card-utils for Multi connection of
Audio Graph Card, Because of DT node parsing, it should check port
1st instead of endpoint. Otherwise, it can't handle DAI correctly.
|
|
Signed-off-by: Stephen Gordon <gordoste@iinet.net.au>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241207122257.165096-1-gordoste@iinet.net.au
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the current implementation, when ACP driver fails to read
ACPI _WOV entry then the DMI overrides code won't invoke,
may cause regressions for some BIOS versions.
Add a condition check to jump to check the DMI entries incase of
ACP driver fail to read ACPI _WOV method.
Fixes: 4095cf872084 (ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry)
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241210091026.996860-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Chancel Liu <chancel.liu@nxp.com>:
Platforms like i.MX93/91 only have one audio PLL. Some sample rates are
not supported. If the PLL source is used for 8kHz series rates, then
11kHz series rates can't be supported. Add common function to constrain
rates according to different clock sources.
In ASoC drivers switch to this new function.
|
|
Merge series from codekipper@gmail.com:
I've tested this patch series on the Allwinner H3, A64, H6 and H313 SoCs
up to 192KHz.
24bit support is working on my H313 board but 16bit plays a bit slow and
I suspect that there is an issue with the clock setups. This is even
present without this patch stack. I would look to address this asap,
but for now can you please review what's here.
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
1. Fix the incorrect cfg-mics value in card->components string.
2. New codec match entries supports.
Bard Liao (6):
ASoC: Intel: sof_sdw: correct mach_params->dmic_num
ASoC: Intel: sof_sdw: reduce log level for not using internal dmic
ASoC: Intel: sof_sdw: improve the log of DAI link numbers
ASoC: Intel: soc-acpi-intel-ptl-match: add rt712_vb + rt1320 support
ASoC: Intel: soc-acpi-intel-lnl-match: add rt713_vb_l2_rt1320_l13
support
ASoC: Intel: soc-acpi-intel-ptl-match: add rt713_vb_l2_rt1320_l13
support
Simon Trimmer (4):
ASoC: Intel: sof_sdw: Correct quirk for Lenovo Yoga Slim 7
ASoC: Intel: sof_sdw: Add a dev_dbg message for the SOC_SDW_CODEC_MIC
quirk
ASoC: Intel: soc-acpi: arl: Correct naming of a cs35l56 address struct
ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops
sound/soc/intel/boards/sof_sdw.c | 33 ++--
.../intel/common/soc-acpi-intel-arl-match.c | 45 +++++-
.../intel/common/soc-acpi-intel-lnl-match.c | 70 +++++++++
.../intel/common/soc-acpi-intel-ptl-match.c | 148 ++++++++++++++++++
4 files changed, 282 insertions(+), 14 deletions(-)
--
2.43.0
|
|
Using WARN() for showing the error of symlink creations don't give
more information than telling that something goes wrong, since the
usual code path is a lregister callback from each control element
creation. More badly, the use of WARN() rather confuses fuzzer as if
it were serious issues.
This patch downgrades the warning messages to use the normal dev_err()
instead of WARN(). For making it clearer, add the function name to
the prefix, too.
Fixes: a135dfb5de15 ("ALSA: led control - add sysfs kcontrol LED marking layer")
Reported-by: syzbot+4e7919b09c67ffd198ae@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/675664c7.050a0220.a30f1.018c.GAE@google.com
Link: https://patch.msgid.link/20241209095614.4273-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.13
Fix for the build issue in the ASoC driver with the SCMI support by
enforcing the link-time dependency if IMX_SCMI_MISC_DRV is a loadable
module but not if that is disabled.
* tag 'scmi-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix i.MX build dependency
Link: https://lore.kernel.org/r/20241205114348.708618-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
24 bit audio file can be detected by the alsa driver as S32_LE.
Add this format to what is supported and change the DMA address
width.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://patch.msgid.link/20241111165600.57219-4-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This doesn't affect 16bit formats and allows us to properly run
24bit formats.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://patch.msgid.link/20241111165600.57219-3-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There have been intermittent issues with the SPDIF output on H3
and H2+ devices which has been fixed by setting the s_clk to 4
times the audio pll.
Add a quirk for the clock multiplier as not every supported SoC
requires it. Without the multiplier, the audio at normal sampling
rates was distorted and did not play at higher sampling rates.
Fixes: 1bd92af877ab ("ASoC: sun4i-spdif: Add support for the H3 SoC")
Signed-off-by: George Lander <lander@jagmn.com>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://patch.msgid.link/20241111165600.57219-2-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-21-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-20-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-19-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-18-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-17-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-16-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-15-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-14-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-13-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-12-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-11-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-10-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-9-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-8-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-7-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-6-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-5-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-4-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-3-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-2-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
