Age | Commit message (Collapse) | Author |
|
The workaround for Dell machines to skip the pin-shutup for mic pins
introduced alc_headset_mic_no_shutup() that is replaced from the
generic snd_hda_shutup_pins() for certain codecs. The problem is that
the call is done unconditionally even if spec->no_shutup_pins is set.
This seems causing problems on other platforms like Lenovo.
This patch corrects the behavior and the driver honors always
spec->no_shutup_pins flag and skips alc_headset_mic_no_shutup() if
it's set.
Fixes: dad3197da7a3 ("ALSA: hda/realtek - Fixup headphone noise via runtime suspend")
Reported-and-tested-by: Oleg Gorobets <oleg.goro@gmail.com>
Link: https://patch.msgid.link/20250315143020.27184-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix quirk for CME master keyboards so it not only handles
sysex but also song position pointer, MIDI timing clock, start
and stop messages, and active sensing. All of these can be
output by the CME UF series master keyboards.
Tested with a CME UF6 in a desktop Linux environment as
well as on the Zynthian Raspberry Pi based platform.
Signed-off-by: Ricard Wanderlof <ricard2013@butoba.net>
Link: https://patch.msgid.link/20250313-cme-fix-v1-1-d404889e4de8@butoba.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us
dropping ugly __maybe_unused attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-10-tiwai@suse.de
|
|
Use the newer DEFINE_SIMPLE_DEV_PM_OPS() macro instead of
SIMPLE_DEV_PM_OPS() together with pm_ptr(), which makes
CONFIG_PM_SLEEP ifdefs superfluous.
Merely a cleanup, there should be no actual code change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-9-tiwai@suse.de
|
|
Use the newer EXPORT_SIMPLE_DEV_PM_OPS() macro instead of
SIPLE_DEV_PM_OPS() and manual export, together with pm_ptr() macro,
which makes CONFIG_PM_SLEEP ifdefs superfluous.
Merely a cleanup, there should be no actual code change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-8-tiwai@suse.de
|
|
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-7-tiwai@suse.de
|
|
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-6-tiwai@suse.de
|
|
Clean up the code with the helper macros, and also assure that no PM
ops is assigned without CONFIG_PM via pm_ptr().
Merely a cleanup, there should be no actual code change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-5-tiwai@suse.de
|
|
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of
SET_SYSTEM_SLEEP_PM_OPS(), which makes CONFIG_PM_SLEEP ifdefs
superfluous.
Merely a cleanup, there should be no actual code change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-4-tiwai@suse.de
|
|
Use the newer DEFINE_SIMPLE_DEV_PM_OPS() macro instead of
SIMPLE_DEV_PM_OPS() together with pm_ptr(), which makes
CONFIG_PM_SLEEP ifdefs superfluous.
Merely a cleanup, there should be no actual code change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-3-tiwai@suse.de
|
|
Use a newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which makes CONFIG_PM ifdefs superfluous.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-2-tiwai@suse.de
|
|
Merge series from Ryan Walklin <ryan@testtoast.com>:
Hi All,
V3 of this patch adding headphone jack detection support to the Anbernic RGnnXX series of handhelds. V3 corrects my misunderstanding of derivation of ALSA UCM file paths, and adds recieved Reviewed-by and Tested-by tags. Thanks to those that have reviewed and fed back on previous versions.
Original message below:
This series adds the required device tree bindings to describe GPIOs for jack detection in the sun4i-codec driver, adds support for jack detection to the codec machine driver, and describes the hardware configuration in the RG35XX DTS. The existing speaker amplifier GPIO pin can then be used in concert with jack detection to enable userspace sound servers (via an ALSA UCM configuration) to disable the speaker route when headphones are connected.
Thanks to Chris Morgan for his assistance putting this series together.
Regards,
Ryan
Chris Morgan (2):
ASoC: dt-bindings: sun4i-a10-codec: add hp-det-gpios
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
Ryan Walklin (3):
ASoC: sun4i-codec: correct dapm widgets and controls for h616
ASoC: sun4i-codec: support hp-det-gpios property
ASoC: sun4i-codec: add h616 card long_name
.../sound/allwinner,sun4i-a10-codec.yaml | 6 ++
.../sun50i-h700-anbernic-rg35xx-2024.dts | 5 +-
sound/soc/sunxi/sun4i-codec.c | 57 ++++++++++++++++++-
3 files changed, 66 insertions(+), 2 deletions(-)
--
2.48.1
|
|
Merge the for-6.14 to resolve conflicts with simple-card-utils.c due to
parallel delveopment.
|
|
Adding jack detection requires sound servers to act on the emitted
events, which are described by ALSA Use Case Manager configurations in
userspace. These configurations include the long card name in the file
path (falling back to card->name if this is not present), so add a long
card name for the H616 without spaces, making UCM referencing easier.
The corresponding ALSA UCM patch is here (now merged):
https://github.com/alsa-project/alsa-ucm-conf/pull/491
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
Changelog v1..v2:
- Separate patch for card->long_name
- Note UCM patch link
Changelog v2..v3:
- Add card->long_name rather than change existing card->name
Link: https://patch.msgid.link/20250214220247.10810-6-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for GPIO headphone detection with the hp-det-gpios
property. In order for this to properly disable the path upon
removal of headphones, the output must be labelled Headphone which
is a common sink in the driver.
Describe a headphone jack and detection GPIO in the driver, check for
a corresponding device tree node, and enable jack detection in a new
machine init function if described.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
Changelog v1..v2:
- Separate DAPM changes into separate patch and add rationale.
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-4-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The previous H616 support patch added a single LINEOUT DAPM pin switch
to the card controls. As the codec in this SoC only has a single route,
this seemed reasonable at the time, however is redundant given the
existing DAPM codec widget definitions controlling the digital and
analog sides of the codec.
It is also insufficient to describe the scenario where separate
components (muxes, jack detection etc) are used to modify the audio
route external to the SoC. For example the Anbernic RG(##)XX series of
devices uses a headphone jack detection switch, GPIO-controlled speaker
amplifier and a passive external mux chip to route audio.
Remove the redundant LINEOUT card control, and add a Speaker pin switch
control and Headphone DAPM widget to allow control of the above
hardware.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-3-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The former code sets the V slot from inside set_bitwidth according to
the bitwidth of the PCM format. That's wrong, since:
* It overrides the V slot parsed from DT binding.
* The V slot is set shifted behind the I slot by the length of the PCM
bitwidth, but the PCM bitwidth has no assured relation to the TDM
slot width.
Replace the former logic by setting up the I/V sense transmission only
in case of both I/V slots being specified in devicetree, and never
override those values. In case the slots are left unspecified, disable
the transmission completely.
There's an improbable case someone is relying on the old behavior, but
if so, that's a setup that only works by accident, and cannot be sanely
supported going forward. There's no indication anyone is consuming the
I/V sense data up to today, so break the former behavior.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-6-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new explicit function for the setting of I/V sense TDM slots.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-5-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add control to expose the option of autoretry behavior on overcurrent
events in the codec.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-4-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SN012776 is a speaker amp chip found in Apple's 2021 laptops. It appears
similar and more-or-less compatible to TAS2764. Extend the TAS2764
driver with some SN012776 specifics and configure the chip assuming
it's in one of the Apple machines.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-3-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for
device node") uses __free(device_node) for dlc->of_node, but we need to
keep it while driver is in use.
Don't use __free(device_node) in graph_util_parse_dai().
Fixes: 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node")
Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Reported-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/87eczisyhh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the compiler (clang 19.1.7) is not happy about the size of
the stack frame in sof_ipc4_prepare_copier_module:
sound/soc/sof/ipc4-topology.c:1800:1: error: stack frame size (1288) exceeds limit (1024) in 'sof_ipc4_prepare_copier_module' [-Werror,-Wframe-larger-than]
1800 | sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
| ^
Work around this by allocating ref_params on stack, as it looks the biggest
variable on stack right now.
Note, this only happens when compile for 32-bit machines (x86_32 in my case).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250312160516.3864295-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
The bulk of this is driver specific fixes, mostly unremarkable. There's
also one core fix from Charles, fixing up confusion around the limiting
of maximum control values.
|
|
The custom suspend function causes a build warning when CONFIG_PM_SLEEP
is disabled:
sound/soc/codecs/cs42l43.c:2405:12: error: unused function 'cs42l43_codec_runtime_force_suspend' [-Werror,-Wunused-function]
Change SET_SYSTEM_SLEEP_PM_OPS() to the newer SYSTEM_SLEEP_PM_OPS(),
to avoid this.
Fixes: 164b7dd4546b ("ASoC: cs42l43: Add jack delay debounce after suspend")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250305172738.3437513-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a fixup to enable the mute LED on HP Pavilion x360 Convertible
14-dy1xxx with ALC295 codec. The appropriate coefficient index and bits
were identified through a brute-force method, as detailed in
https://bbs.archlinux.org/viewtopic.php?pid=2079504#p2079504.
Signed-off-by: Navon John Lukose <navonjohnlukose@gmail.com>
Link: https://patch.msgid.link/20250307213319.35507-1-navonjohnlukose@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We are trying to get rid of all multiplications from allocation
functions to prevent potential integer overflows. Here the
multiplication is probably safe, but using kcalloc() is more
appropriate and improves readability. This patch has no effect
on runtime behavior.
Link: https://github.com/KSPP/linux/issues/162 [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Link: https://patch.msgid.link/20250308-ctdaio-kzalloc-v1-1-804a09875b0e@ethancedwards.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We create a gpio descriptor table but it needs to be free:ed
when the module is removed. Add a devm_ action to do the job.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: da9146c19b17 ("ASoC: samsung: speyside: Convert to GPIO descriptor")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250312-cleanup-table-v1-1-1d9a14464482@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is a backmerge from Linux 6.14-rc6, needed for the nova PR.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add condition check to register ACP PDM sound card by reading
_WOV acpi entry.
Fixes: 09068d624c49 ("ASoC: amd: acp: fix for acp platform device creation failure")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-15-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor renoir platform resource private structure to amd.h
header file.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-14-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor rembrandt platform resource private structure to amd.h
header fle.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-13-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor acp63 platform resource private structure to amd.h
header file.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-12-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor acp70 platform resource private structure to amd.h
header file.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-11-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove white line in renoir platform driver.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-10-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move spin_lock and linked list initialization from platform driver to
acp-pci driver.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-9-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move acp_dev_data structure members to acp_chip_info structure
to avoid using common members in each structure and remove redundant
acp_dev_data structure.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-8-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new interrupt handle callbacks in acp_common_hw_ops.
Refactor and move interrupt handler registration form platform
driver to pci driver.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-7-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor and move acp machine select function from acp platform
driver to acp pci driver and assign platform specific acpi machines
to chip->machines.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-6-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor acp platform device creation logic and remove unused
acp resource (acp_res) structure.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-5-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor dmic-codec platform driver creation using helper function.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-4-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implement acp common hardware ops for acp_init and acp_deinit
funcions to support commons ops for all platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-3-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As acp71 platform driver uses acp70 platform driver, remove the
redundant chip->name.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250310183201.11979-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Free some resources in the error handling path of the probe, as already
done in the remove function.
Fixes: e3523e01869d ("ASoC: wm0010: Add initial wm0010 DSP driver")
Fixes: fd8b96574456 ("ASoC: wm0010: Clear IRQ as wake source and include missing header")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/5139ba1ab8c4c157ce04e56096a0f54a1683195c.1741549792.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Patch adds driver data & match table for cs42l43
multi-function codec on PTL-RVP at sdw link3.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250311003101.80967-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Setting format to s16le is required for compressed playback on compatible
soundcards.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250228161430.373961-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the return value from spi_setup() is not checked for a failure.
It is unlikely it will ever fail in this particular case but it is still
better to add this check for the sake of completeness and correctness. This
is cheap since it is performed once when the device is being probed.
Handle spi_setup() return value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 872fc0b6bde8 ("ASoC: cs35l41: Set the max SPI speed for the whole device")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://patch.msgid.link/20250304115643.2748-1-v.shevtsov@mt-integration.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT722_SDCA_ENT_FU15,
RT722_SDCA_CTL_FU_CH_GAIN, CH_01) ... SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY,
RT722_SDCA_ENT_FU15, RT722_SDCA_CTL_FU_CH_GAIN, CH_04) are used by the
"FU15 Boost Volume" control, but not marked as readable.
And the mbq size are 2 for those registers.
Fixes: 7f5d6036ca005 ("ASoC: rt722-sdca: Add RT722 SDCA driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250310080440.58797-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DP0 is required for BPT/BRA transport.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-17-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When the firmware is involved, the data can be transferred with a
CHAIN_DMA on LNL+.
The CHAIN_DMA needs to be programmed before the DMAs per the
documentation. The states are not exactly symmetrical, on stop we must
do a PAUSE and RESET.
The FIFO size of 10ms was determined experimentally. With the minimum
of 2ms, errors were reported by the codec, likely because of xruns.
The code flow deals with the two TX and RX CHAIN_DMAs in symmetrical
ways, i.e.
alloc TX
alloc RX
enable TX
enable RX
disable RX
disable TX
free RX
free TX
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add SoundWire BPT DMA helpers as a separate module to avoid circular
dependencies.
For now this assumes no link DMA, only coupled mode.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|