summaryrefslogtreecommitdiff
path: root/tools/perf
AgeCommit message (Collapse)Author
2016-12-20perf annotate: Don't throw error for zero length symbolsRavi Bangoria
'perf report --tui' exits with error when it finds a sample of zero length symbol (i.e. addr == sym->start == sym->end). Actually these are valid samples. Don't exit TUI and show report with such symbols. Reported-and-Tested-by: Anton Blanchard <anton@samba.org> Link: https://lkml.org/lkml/2016/10/8/189 Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Riyder <chris.ryder@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@kernel.org # v4.9+ Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf bench futex: Fix lock-pi help stringDavidlohr Bueso
Obvious copy/paste typo from the requeue program. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dbueso@suse.de> Link: http://lkml.kernel.org/r/1481830584-30909-1-git-send-email-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf trace: Check if MAP_32BIT is defined (again)Jiri Olsa
There might be systems where MAP_32BIT is not defined, like some some RHEL7 powerpc versions. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Kyle McMartin <kyle@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 256763b01741 ("perf trace beauty mmap: Add more conditional defines") Link: http://lkml.kernel.org/r/1481831814-23683-1-git-send-email-jolsa@kernel.org [ Changed the Fixme cset to the one removing the conditional switch case for MAP_32BIT ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-17Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - prototypes for x86 asm-exported symbols (Adam Borowski) and a warning about missing CRCs (Nick Piggin) - asm-exports fix for LTO (Nicolas Pitre) - thin archives improvements (Nick Piggin) - linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick Piggin) - genksyms support for __builtin_va_list keyword - misc minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: enable modversions for symbols exported from asm kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case scripts/kallsyms: remove last remnants of --page-offset option make use of make variable CURDIR instead of calling pwd kbuild: cmd_export_list: tighten the sed script kbuild: minor improvement for thin archives build kbuild: modpost warn if export version crc is missing kbuild: keep data tables through dead code elimination kbuild: improve linker compatibility with lib-ksyms.o build genksyms: Regenerate parser kbuild/genksyms: handle va_list type kbuild: thin archives for multi-y targets kbuild: kallsyms allow 3-pass generation if symbols size has changed
2016-12-15perf annotate: Fix jump target outside of function address rangeRavi Bangoria
If jump target is outside of function range, perf is not handling it correctly. Especially when target address is lesser than function start address, target offset will be negative. But, target address declared to be unsigned, converts negative number into 2's complement. See below example. Here target of 'jumpq' instruction at 34cf8 is 34ac0 which is lesser than function start address(34cf0). 34ac0 - 34cf0 = -0x230 = 0xfffffffffffffdd0 Objdump output: 0000000000034cf0 <__sigaction>: __GI___sigaction(): 34cf0: lea -0x20(%rdi),%eax 34cf3: cmp -bashx1,%eax 34cf6: jbe 34d00 <__sigaction+0x10> 34cf8: jmpq 34ac0 <__GI___libc_sigaction> 34cfd: nopl (%rax) 34d00: mov 0x386161(%rip),%rax # 3bae68 <_DYNAMIC+0x2e8> 34d07: movl -bashx16,%fs:(%rax) 34d0e: mov -bashxffffffff,%eax 34d13: retq perf annotate before applying patch: __GI___sigaction /usr/lib64/libc-2.22.so lea -0x20(%rdi),%eax cmp -bashx1,%eax v jbe 10 v jmpq fffffffffffffdd0 nop 10: mov _DYNAMIC+0x2e8,%rax movl -bashx16,%fs:(%rax) mov -bashxffffffff,%eax retq perf annotate after applying patch: __GI___sigaction /usr/lib64/libc-2.22.so lea -0x20(%rdi),%eax cmp -bashx1,%eax v jbe 10 ^ jmpq 34ac0 <__GI___libc_sigaction> nop 10: mov _DYNAMIC+0x2e8,%rax movl -bashx16,%fs:(%rax) mov -bashxffffffff,%eax retq Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Riyder <chris.ryder@arm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1480953407-7605-3-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf annotate: Support jump instruction with target as second operandRavi Bangoria
Architectures like PowerPC have jump instructions that includes a target address as a second operand. For example, 'bne cr7,0xc0000000000f6154'. Add support for such instruction in perf annotate. objdump o/p: c0000000000f6140: ld r9,1032(r31) c0000000000f6144: cmpdi cr7,r9,0 c0000000000f6148: bne cr7,0xc0000000000f6154 c0000000000f614c: ld r9,2312(r30) c0000000000f6150: std r9,1032(r31) c0000000000f6154: ld r9,88(r31) Corresponding perf annotate o/p: Before patch: ld r9,1032(r31) cmpdi cr7,r9,0 v bne 3ffffffffff09f2c ld r9,2312(r30) std r9,1032(r31) 74: ld r9,88(r31) After patch: ld r9,1032(r31) cmpdi cr7,r9,0 v bne 74 ld r9,2312(r30) std r9,1032(r31) 74: ld r9,88(r31) Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Riyder <chris.ryder@arm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1480953407-7605-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf record: Force ignore_missing_thread for uid optionJiri Olsa
Enable perf_evsel::ignore_missing_thread for -u option to ignore complete failure if any of the user's processes die between its enumeration and time we open the event. Committer notes: While doing a 'make -j4 allmodconfig' we sometimes get into the race: Before: # perf record -u acme Error: The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:ppp). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? # After: [root@jouet ~]# perf record -u acme WARNING: Ignored open failure for pid 9888 WARNING: Ignored open failure for pid 18059 [root@jouet ~]# Which is an improvement, with the races not preventing the remaining threads for the specified user from being monitored, but the message probably needs further clarification. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf evsel: Allow to ignore missing pidJiri Olsa
Adding perf_evsel::ignore_missing_cpu_thread bool. When set true, it allows perf to ignore error of missing pid of perf event syscall. We remove missing thread id from the thread_map, so the rest of the processing like ioctl and mmap won't get disturbed with -1 fd. The reason for supporting this is to ease up monitoring group of pids, that 'disappear' before perf opens their event. This currently leads perf to report error and exit and makes perf record's -u option unusable under certain setup. With this change we will allow this race and ignore such failure with following warning: WARNING: Ignored open failure for pid 8605 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161213074622.GA3084@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf thread_map: Add thread_map__remove functionJiri Olsa
Add thread_map__remove function to remove thread from thread map. Add automated test also. Committer notes: Testing it: # perf test "Remove thread map" 39: Remove thread map : Ok # perf test -v "Remove thread map" 39: Remove thread map : --- start --- test child forked, pid 4483 2 threads: 4482, 4483 1 thread: 4483 0 thread: test child finished with 0 ---- end ---- Remove thread map: Ok # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-4-git-send-email-jolsa@kernel.org [ Added stdlib.h, to get the free() declaration ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf evsel: Use variable instead of repeating lengthy FD macroJiri Olsa
It's more readable and will ease up following patches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481538943-21874-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf mem: Fix --all-user/--all-kernel optionsJiri Olsa
Removing extra '--' prefix. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: ad16511b0e40 ("perf mem: Add -U/-K (--all-user/--all-kernel) options") Link: http://lkml.kernel.org/r/1481538943-21874-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf tools: Remove some needless __maybe_unusedArnaldo Carvalho de Melo
I.e. those parameters/functions _are_ used, so ditch that misleading attribute. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-13cqtjh0yojg5gzvpq1zzpl0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Show callchains for idle statNamhyung Kim
When --idle-hist option is used with --summary, it now shows idle stats with callchains like below: Idle stats by callchain: CPU 0: 902.195 msec Idle time (msec) Count Callchains ---------------- ------- -------------------------------------------------- 370.589 69 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 178.799 17 worker_thread <- kthread <- ret_from_fork 128.352 17 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 125.111 19 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 71.599 50 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 23.146 1 rcu_gp_kthread <- kthread <- ret_from_fork 4.510 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 0.085 1 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- do_restart_poll ... Committer notes: Extra testing: # uname -a Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux 1) Run 'perf sched record -g' 2) Run 'perf sched timehist --idle --summary' <SNIP> Idle stats by callchain: CPU 0: 13456.840 msec Idle time (msec) Count Callchains ---------------- ----- -------------------------------------------------- 5386.637 3283 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 2750.238 2299 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- do_syscall_64 1275.672 1287 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- entry_SYSCALL_64_fastpath 936.322 452 worker_thread <- kthread <- ret_from_fork 741.311 385 rcu_nocb_kthread <- kthread <- ret_from_fork 729.385 248 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_ppoll 365.386 229 irq_thread <- kthread <- ret_from_fork 338.934 265 futex_wait_queue_me <- futex_wait <- do_futex <- sys_futex <- entry_SYSCALL_64_fastpath 219.488 201 schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork 186.839 410 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- ep_poll <- sys_epoll_wait <- do_syscall_64 142.541 59 kvm_vcpu_block <- kvm_arch_vcpu_ioctl_run <- kvm_vcpu_ioctl <- do_vfs_ioctl <- sys_ioctl 83.887 92 smpboot_thread_fn <- kthread <- ret_from_fork 62.722 96 do_exit <- do_group_exit <- 0x2a5594 <- entry_SYSCALL_64_fastpath 47.894 83 pipe_wait <- pipe_read <- __vfs_read <- vfs_read <- sys_read 46.554 61 rcu_gp_kthread <- kthread <- ret_from_fork 34.337 21 schedule_timeout <- intel_fbc_work_fn <- process_one_work <- worker_thread <- kthread 29.521 14 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_select <- core_sys_select 20.274 10 schedule_timeout <- io_schedule_timeout <- bit_wait_io <- __wait_on_bit <- out_of_line_wait_on_bit 15.085 55 schedule_timeout <- unix_stream_read_generic <- unix_stream_recvmsg <- sock_recvmsg <- SYSC_recvfrom <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Add -I/--idle-hist optionNamhyung Kim
The --idle-hist option is to analyze system idle state so which process makes cpu to go idle. If this option is specified, non-idle events will be skipped and processes switching to/from idle will be shown. This option is mostly useful when used with --summary(-only) option. In the idle-time summary view, idle time is accounted to previous thread which is run before idle task. The example output looks like following: Idle-time summary comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations (count) (msec) (msec) (msec) (msec) % -------------------------------------------------------------------------------------------- rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0 migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0 khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0 kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0 systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0 kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0 irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0 kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0 dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0 ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0 wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0 wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0 dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0 ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org [ Merged fix sent by Namhyumg, as posted in the second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Skip non-idle events when necessaryNamhyung Kim
Sometimes it only focuses on idle-related events like upcoming idle-hist feature. In this case we don't want to see other event to reduce noise. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Save callchain when entering idleNamhyung Kim
In order to investigate the idleness reason, it is necessary to keep the callchains when entering idle. This can be identified by the sched:sched_switch event having the next_pid field as 0. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-4-namhyung@kernel.org Link: http://lkml.kernel.org/r/20161213080632.19099-1-namhyung@kernel.org [ Merged fix from Namhyung, see second Link: tag ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Introduce struct idle_time_dataNamhyung Kim
The struct idle_time_data is to keep idle stats with callchains entering to the idle task. The normal thread_runtime calculation is done transparently since it extends the struct thread_runtime. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-3-namhyung@kernel.org [ Align struct field names ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf sched timehist: Split is_idle_sample()Namhyung Kim
The is_idle_sample() function actually does more than determining whether sample come from idle task. Split the callchain part into save_task_callchain() to make it clearer. Also checking prev_pid from trace data looks preferred than just checking sample->pid since it's possible, although rare, to have invalid 0 pid/tid on scheduling an exiting task. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161208144755.16673-2-namhyung@kernel.org [ Remove some needless () in some return statements ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-15perf tools: Move headers check into bash scriptJiri Olsa
To make it nicer and easily maintainable. Also moving the check into fixdep sub make, so its output is not scattered around the build output. Removing extra $$ from mman*.h checks. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-5-git-send-email-jolsa@kernel.org [ Use /bin/sh, and 'function check() {' -> 'check () {' to make it work with busybox, in Alpine Linux, for instance ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-11make use of make variable CURDIR instead of calling pwdUwe Kleine-König
make already provides the current working directory in a variable, so make use of it instead of forking a shell. Also replace usage of PWD by CURDIR. PWD is provided by most shells, but not all, so this makes the build system more robust. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-07perf tools: Explicitly document that --children is enabled by defaultYannick Brosseau
The fact that the --children option is enabled by default is buried deep at the end of the help page, in the overhead calculation section. This make it explicit right where the option is listed, following the same way other default options are described Signed-off-by: Yannick Brosseau <scientist@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20161202160732.29058-1-scientist@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf sched timehist: Cleanup idle_max_cpu handlingNamhyung Kim
It treats the idle_max_cpu little bit confusingly IMHO. Let's make it more straight forward. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf sched timehist: Handle zero sample->tid properlyNamhyung Kim
Sometimes samples have tid of 0 but non-0 pid. It ends up having a new thread of 0 tid/pid (instead of referring idle task) since tid is used to search matching task. But I guess it's wrong to use 0 as a tid when pid is set. This patch uses tid only if it has a non-zero value or same as pid (of 0). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf callchain: Introduce callchain_cursor__copy()Namhyung Kim
The callchain_cursor__copy() function is to save current callchain captured by a cursor. It'll be used to keep callchains when switching to idle task for each cpu. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf sched: Cleanup option processingNamhyung Kim
The -D/--dump-raw-trace option is in the parent option so no need to repeat it. Also move -f/--force option to parent as it's common to handle data file. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-07perf sched timehist: Improve error message when analyzing wrong fileDavid Ahern
Arnaldo reported an unhelpful error message when running perf sched timehist on a file that did not contain sched tracepoints: [root@jouet ~]# perf sched timehist No trace sample to read. Did you call 'perf record -R'? [root@jouet ~]# perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 Change the has_traces check to look for the sched_switch event. Analysis for perf sched timehist requires at least this event. Now when analyzing a file without sched tracepoints you get: root@f21-vbox:/tmp$ perf sched timehist No sched_switch events found. Have you run 'perf sched record'? Signed-off-by: David Ahern <dsahern@gmail.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480451988-43673-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06perf tools: Move perf build related variables under non fixdep legJiri Olsa
Because there's no need for them in fixdep build. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06perf tools: Force fixdep compilation at the start of the buildJiri Olsa
The fixdep tool needs to be built before everything else, because it fixes every object dependency file. We handle this currently by making all objects to depend on fixdep, which is error prone and is easily forgotten when new object is added. Instead of this, this patch force fixdep tool to be built as the first target in the separate make session. This way we don't need to handle extra fixdep dependencies and we are certain there's no fixdep race with any parallel make job. Committer notes: Testing it: Before: $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] GEN /tmp/build/perf/common-cmds.h HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep MKDIR /tmp/build/perf/pmu-events/ HOSTCC /tmp/build/perf/pmu-events/json.o MKDIR /tmp/build/perf/pmu-events/ HOSTCC /tmp/build/perf/pmu-events/jsmn.o HOSTCC /tmp/build/perf/pmu-events/jevents.o HOSTLD /tmp/build/perf/pmu-events/jevents-in.o PERF_VERSION = 4.9.rc8.g868cd5 CC /tmp/build/perf/perf-read-vdso32 <SNIP> After: $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] GEN /tmp/build/perf/common-cmds.h MKDIR /tmp/build/perf/fd/ CC /tmp/build/perf/fd/array.o LD /tmp/build/perf/fd/libapi-in.o MKDIR /tmp/build/perf/fs/ CC /tmp/build/perf/event-parse.o CC /tmp/build/perf/fs/fs.o PERF_VERSION = 4.9.rc8.g57a92f CC /tmp/build/perf/event-plugin.o MKDIR /tmp/build/perf/fs/ CC /tmp/build/perf/fs/tracing_path.o <SNIP> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06perf tools: Move PERF-VERSION-FILE target into rules areaJiri Olsa
An upcoming fixdep fix needs all targets at the same area, so they'll fit under a signal condition block. Moving PERF-VERSION-FILE target into rules section. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06perf build: Check LLVM version in feature checkWang Nan
Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf annotate: Show raw form for jump instruction with indirect targetRavi Bangoria
For jump instructions that does not include target address as direct operand, show the original disassembled line for them. This is needed for certain powerpc jump instructions that use target address in a register (such as bctr, btar, ...). Before: ld r12,32088(r12) mtctr r12 v bctr ffffffffffffca2c std r2,24(r1) addis r12,r2,-1 After: ld r12,32088(r12) mtctr r12 v bctr std r2,24(r1) addis r12,r2,-1 Committer notes: Testing it using a perf.data file and vmlinux for powerpc64, cross-annotating it on a x86_64 workstation: Before: .__bpf_prog_run vmlinux.powerpc │ std r10,512(r9) ▒ │ lbz r9,0(r31) ▒ │ rldicr r9,r9,3,60 ▒ │ ldx r9,r30,r9 ▒ │ mtctr r9 ▒ 100.00 │ ↓ bctr 3fffffffffe01510 ▒ │ lwa r10,4(r31) ▒ │ lwz r9,0(r31) ▒ <SNIP> Invalid jump offset: 3fffffffffe01510 After: .__bpf_prog_run vmlinux.powerpc │ std r10,512(r9) ▒ │ lbz r9,0(r31) ▒ │ rldicr r9,r9,3,60 ▒ │ ldx r9,r30,r9 ▒ │ mtctr r9 ▒ 100.00 │ ↓ bctr ▒ │ lwa r10,4(r31) ▒ │ lwz r9,0(r31) ▒ <SNIP> Invalid jump offset: 3fffffffffe01510 This, in turn, uncovers another problem with jumps without operands, the ENTER/-> operation, to jump to the target, still continues using the bogus target :-) BTW, this was the file used for the above tests: [acme@jouet ravi_bangoria]$ perf report --header-only -i perf.data.f22vm.powerdev # ======== # captured on: Thu Nov 24 12:40:38 2016 # hostname : pdev-f22-qemu # os release : 4.4.10-200.fc22.ppc64 # perf version : 4.9.rc1.g6298ce # arch : ppc64 # nrcpus online : 48 # nrcpus avail : 48 # cpudesc : POWER7 (architected), altivec supported # cpuid : 74,513 # total memory : 4158976 kB # cmdline : /home/ravi/Workspace/linux/tools/perf/perf record -a # event : name = cycles:ppp, , size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, disabled = 1, inherit = 1, mmap = 1, c # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # pmu mappings: cpu = 4, software = 1, tracepoint = 2, breakpoint = 5 # missing features: HEADER_TRACING_DATA HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT HEADER_CACHE # ======== # [acme@jouet ravi_bangoria]$ Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Riyder <chris.ryder@arm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1480953407-7605-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf tools: Add non config targetsJiri Olsa
Adding some missing non config targets that were for some reason omitted. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf tools: Cleanup build directory before each testJiri Olsa
Cleanup the fixdep tool before every test. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-8-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf tools: Move python/perf.so target into rules areaJiri Olsa
Following fixdep fix needs all targets at the same area, so they'll fit under signal condition block. Moving python/perf.so target into rules section and intentionally removing the perl script related comment. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf tools: Move install-gtk target into rules areaJiri Olsa
The upcoming fixdep fix needs all targets at the same area, so they'll fit under a signal condition block. Move install-gtk target into the rules section. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf clang: Compile BPF script using builtin clang supportWang Nan
After this patch, perf utilizes builtin clang support to build BPF script, no longer depend on external clang, but fallbacking to it if for some reason the builtin compiling framework fails. Test: $ type clang -bash: type: clang: not found $ cat ~/.perfconfig $ echo '#define LINUX_VERSION_CODE 0x040700' > ./test.c $ cat ./tools/perf/tests/bpf-script-example.c >> ./test.c $ ./perf record -v --dry-run -e ./test.c 2>&1 | grep builtin bpf: successfull builtin compilation $ Can't pass cflags so unable to include kernel headers now. Will be fixed by following commits. Committer notes: Make sure '-v' comes before the '-e ./test.c' in the command line otherwise the 'verbose' variable will not be set when the bpf event is parsed and thus the pr_debug indicating a 'successfull builtin compilation' will not be output, as the debug level (1) will be less than what 'verbose' has at that point (0). Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-16-wangnan0@huawei.com [ Spell check/reflow successfull pr_debug string ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf clang: Support compile IR to BPF object and add testcaseWang Nan
getBPFObjectFromModule() is introduced to compile LLVM IR(Module) to BPF object. Add new testcase for it. Test result: $ ./buildperf/perf test -v clang 51: builtin clang support : 51.1: builtin clang compile C source to IR : --- start --- test child forked, pid 21822 test child finished with 0 ---- end ---- builtin clang support subtest 0: Ok 51.2: builtin clang compile C source to ELF object : --- start --- test child forked, pid 21823 test child finished with 0 ---- end ---- builtin clang support subtest 1: Ok Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-15-wangnan0@huawei.com [ Remove redundant "Test" from entry descriptions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf clang: Update test case to use real BPF scriptWang Nan
Allow C++ code to use util.h and tests/llvm.h. Let 'perf test' compile a real BPF script. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-14-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf clang: Allow passing CFLAGS to builtin clangWang Nan
Improve getModuleFromSource() API to accept a cflags list. This feature will be used to pass LINUX_VERSION_CODE and -I flags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-13-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf clang: Use real file system for #includeWang Nan
Utilize clang's OverlayFileSystem facility, allow CompilerInstance to access real file system. With this patch the '#include' directive can be used. Add a new getModuleFromSource for real file. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-12-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf clang: Add builtin clang support ant test caseWang Nan
Add basic clang support in clang.cpp and test__clang() testcase. The first testcase checks if builtin clang is able to generate LLVM IR. tests/clang.c is a proxy. Real testcase resides in utils/c++/clang-test.cpp in c++ and exports C interface to perf test subsystem. Test result: $ perf test -v clang 51: builtin clang support : 51.1: Test builtin clang compile C source to IR : --- start --- test child forked, pid 13215 test child finished with 0 ---- end ---- Test builtin clang support subtest 0: Ok Committer note: Make sure you've enabled CLANG and LLVM builtin support by setting the LIBCLANGLLVM variable on the make command line, e.g.: make LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin Otherwise you'll get this when trying to do the 'perf test' call above: # perf test clang 51: builtin clang support : Skip (not compiled in) # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-11-wangnan0@huawei.com [ Removed "Test" from descriptions, redundant and already removed from all the other entries ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf build: Add clang and llvm compile and linking supportWang Nan
Add necessary c++ flags and link libraries to support builtin clang and LLVM. Add all llvm and clang libraries, so don't need to worry about clang changes its libraries setting. However, linking perf would take much longer than usual. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-10-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf llvm: Extract helpers in llvm-utils.cWang Nan
The following commits will use builtin clang to compile BPF scripts. llvm__get_kbuild_opts() and llvm__get_nr_cpus() are extracted to help building '-DKERNEL_VERSION_CODE' and '-D__NR_CPUS__' macros. Doing object dumping in bpf loader, so further builtin clang compiling needn't consider it. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-7-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05perf tools: Pass context to perf hook functionsWang Nan
Pass a pointer to perf hook functions so they receive context information during setup. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-6-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf annotate: AArch64 supportKim Phillips
This is a regex converted version from the original: https://lkml.org/lkml/2016/5/19/461 Add basic support to recognise AArch64 assembly. This allows perf to identify AArch64 instructions that branch to other parts within the same function, thereby properly annotating them. Rebased onto new cross-arch annotation bits: https://lkml.org/lkml/2016/11/25/546 Sample output: security_file_permission vmlinux 5.80 │ ← ret ▒ │70: ldr w0, [x21,#68] ▒ 4.44 │ ↓ tbnz d0 ▒ │ mov w0, #0x24 // #36 ▒ 1.37 │ ands w0, w22, w0 ▒ │ ↑ b.eq 60 ▒ 1.37 │ ↓ tbnz e4 ▒ │ mov w19, #0x20000 // #131072 ▒ 1.02 │ ↓ tbz ec ▒ │90:┌─→ldr x3, [x21,#24] ▒ 1.37 │ │ add x21, x21, #0x10 ▒ │ │ mov w2, w19 ▒ 1.02 │ │ mov x0, x21 ▒ │ │ mov x1, x3 ▒ 1.71 │ │ ldr x20, [x3,#48] ▒ │ │→ bl __fsnotify_parent ▒ 0.68 │ │↑ cbnz 60 ▒ │ │ mov x2, x21 ▒ 1.37 │ │ mov w1, w19 ▒ │ │ mov x0, x20 ▒ 0.68 │ │ mov w5, #0x0 // #0 ▒ │ │ mov x4, #0x0 // #0 ▒ 1.71 │ │ mov w3, #0x1 // #1 ▒ │ │→ bl fsnotify ▒ 1.37 │ │↑ b 60 ▒ │d0:│ mov w0, #0x0 // #0 ▒ │ │ ldp x19, x20, [sp,#16] ▒ │ │ ldp x21, x22, [sp,#32] ▒ │ │ ldp x29, x30, [sp],#48 ▒ │ │← ret ▒ │e4:│ mov w19, #0x10000 // #65536 ▒ │ └──b 90 ◆ │ec: brk #0x800 ▒ Press 'h' for help on key bindings Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Chris Ryder <chris.ryder@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20161130092344.012e18e3e623bea395162f95@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf annotate: Use arch->objdump.comment_char in dec__parse()Kim Phillips
Presume neglected in commit 786c1b5 "perf annotate: Start supporting cross arch annotation". This doesn't fix a bug since none of the affected arches support parsing dec/inc instructions yet. Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Ryder <chris.ryder@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20161130092333.1cca5dd2c77e1790d61c1e9c@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf report: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: Using the perf.data file captured via 'perf kmem record': # perf report --header-only # ======== # captured on: Tue Nov 29 16:01:53 2016 # hostname : jouet # os release : 4.8.8-300.fc25.x86_64 # perf version : 4.9.rc6.g5a6aca # arch : x86_64 # nrcpus online : 4 # nrcpus avail : 4 # cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz # cpuid : GenuineIntel,6,61,4 # total memory : 20254660 kB # cmdline : /home/acme/bin/perf kmem record usleep 1 # event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ # event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl # event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type # event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s # event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } = # event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im # HEADER_CACHE info available, use -I to display # missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT # ======== # # # Looking at just the histogram entries for the first event: # # perf report | head -33 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 40 of event 'kmem:kmalloc' # Event count (approx.): 40 # # Overhead Trace output # ........ ............................................................................................................... # 37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL 10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO 7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO 2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO 2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO 2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO 2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO # # # And then limiting using the example for 'perf kmem stat --time' used # # in the previous changeset committer note we see that there were no # # kmem:kmalloc in that last part of the file, but there were some # # kmem:kmem_cache_alloc ones: # # perf report --time 20119.782088, --stdio # # Total Lost Samples: 0 # # Samples: 0 of event 'kmem:kmalloc' # Event count (approx.): 0 # # Overhead Trace output # ........ ............ # # Samples: 0 of event 'kmem:kmalloc_node' # Event count (approx.): 0 # # Overhead Trace output # ........ ............ # # Samples: 0 of event 'kmem:kfree' # Event count (approx.): 0 # # Overhead Trace output # ........ ............ # # Samples: 8 of event 'kmem:kmem_cache_alloc' # Event count (approx.): 8 # # Overhead Trace output # ........ .................................................................................................................. # 75.00% call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO 12.50% call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK 12.50% call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf kmem: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf kmem record usleep 1 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 1.540 MB perf.data (2049 samples) ] # perf evlist kmem:kmalloc kmem:kmalloc_node kmem:kfree kmem:kmem_cache_alloc kmem:kmem_cache_alloc_node kmem:kmem_cache_free # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # # # Use 'perf script' to get a first approach, select a chunk for then using # # with 'perf kmem stat --time' # # perf script | tail -15 usleep 9889 [0] 20119.782088: kmem:kmem_cache_free: (selinux_file_free_security+0x27) call_site=ffffffffb936aa07 ptr=0xffff888a1df49fc0 perf 9888 [3] 20119.782088: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782089: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782090: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782090: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO usleep 9889 [0] 20119.782091: kmem:kmem_cache_alloc: (__sigqueue_alloc+0x4a) call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK perf 9888 [3] 20119.782091: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782093: kmem:kmem_cache_free: (__sigqueue_free.part.17+0x33) call_site=ffffffffb90ad3f3 ptr=0xffff8889f071f6e0 perf 9888 [3] 20119.782098: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782098: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782099: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782100: kmem:kmem_cache_alloc: (alloc_buffer_head+0x21) call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782101: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782102: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782103: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 # # # stats for the whole perf.data file, i.e. no interval specified # # perf kmem stat SUMMARY (SLAB allocator) ======================== Total bytes requested: 172,628 Total bytes allocated: 173,088 Total bytes freed: 161,280 Net total bytes allocated: 11,808 Total bytes wasted on internal fragmentation: 460 Internal fragmentation: 0.265761% Cross CPU allocations: 0/851 # # # stats for an end open interval, after a certain time: # # perf kmem stat --time 20119.782088, SUMMARY (SLAB allocator) ======================== Total bytes requested: 552 Total bytes allocated: 552 Total bytes freed: 448 Net total bytes allocated: 104 Total bytes wasted on internal fragmentation: 0 Internal fragmentation: 0.000000% Cross CPU allocations: 0/8 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-6-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf sched timehist: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf script: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for some amount of time and analyze a segment of interest within that window. Committer notes: Testing it: # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # # perf script --hide-call-graph | head -15 swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux) perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux) perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) # # perf script --hide-call-graph --time ,9693.370048 swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) # perf script --hide-call-graph --time 9693.370064,9693.370076 swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux) # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-15 20:28:05 +0000