summaryrefslogtreecommitdiff
path: root/tools/perf
AgeCommit message (Collapse)Author
2024-10-14perf evsel: Fix missing inherit + sample read checkNamhyung Kim
It should not clear the inherit bit simply because the kernel doesn't support the sample read with it. IOW the inherit bit should be kept when the sample read is not requested for the event. Fixes: 90035d3cd876cb71 ("tools/perf: Allow inherit + PERF_SAMPLE_READ when opening events") Acked-by: Ben Gainey <ben.gainey@arm.com> Link: https://lore.kernel.org/r/20241009062250.730192-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-14perf sched timehist: Add pre-migration wait time optionMadadi Vineeth Reddy
pre-migration wait time is the time that a task unnecessarily spends on the runqueue of a CPU but doesn't get switched-in there. In terms of tracepoints, it is the time between sched:sched_wakeup and sched:sched_migrate_task. Let's say a task woke up on CPU2, then it got migrated to CPU4 and then it's switched-in to CPU4. So, here pre-migration wait time is time that it was waiting on runqueue of CPU2 after it is woken up. The general pattern for pre-migration to occur is: sched:sched_wakeup sched:sched_migrate_task sched:sched_switch The sched:sched_waking event is used to capture the wakeup time, as it aligns with the existing code and only introduces a negligible time difference. pre-migrations are generally not useful and it increases migrations. This metric would be helpful in testing patches mainly related to wakeup and load-balancer code paths as better wakeup logic would choose an optimal CPU where task would be switched-in and thereby reducing pre- migrations. The sample output(s) when -P or --pre-migrations is used: ================= time cpu task name wait time sch delay run time pre-mig time [tid/pid] (msec) (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- --------- 38456.720806 [0001] schbench[28634/28574] 4.917 4.768 1.004 0.000 38456.720810 [0001] rcu_preempt[18] 3.919 0.003 0.004 0.000 38456.721800 [0006] schbench[28779/28574] 23.465 23.465 1.999 0.000 38456.722800 [0002] schbench[28773/28574] 60.371 60.237 3.955 60.197 38456.722806 [0001] schbench[28634/28574] 0.004 0.004 1.996 0.000 38456.722811 [0001] rcu_preempt[18] 1.996 0.005 0.005 0.000 38456.723800 [0000] schbench[28833/28574] 4.000 4.000 3.999 0.000 38456.723800 [0004] schbench[28762/28574] 42.951 42.839 3.999 39.867 38456.723802 [0007] schbench[28812/28574] 43.947 43.817 3.999 40.866 38456.723804 [0001] schbench[28587/28574] 7.935 7.822 0.993 0.000 Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com> Link: https://lore.kernel.org/r/20241004170756.18064-1-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-14perf tools: Remove unnecessary parenthesesNamhyung Kim
The hashmap API used to require parentheses for the hashmap argument if it's not a pointer type. It's now fixed so let's drop the parentheses. Link: https://lore.kernel.org/r/20241009202009.884884-2-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-14perf tools: Fix possible compiler warnings in hashmapNamhyung Kim
The hashmap__for_each_entry[_safe] is accessing 'map' as if it's a pointer. But it does without parentheses so passing a static hash map with an ampersand (like &slab_hash below) caused compiler warnings due to unmatched types. In file included from util/bpf_lock_contention.c:5: util/bpf_lock_contention.c: In function ‘exit_slab_cache_iter’: linux/tools/perf/util/hashmap.h:169:32: error: invalid type argument of ‘->’ (have ‘struct hashmap’) 169 | for (bkt = 0; bkt < map->cap; bkt++) \ | ^~ util/bpf_lock_contention.c:105:9: note: in expansion of macro ‘hashmap__for_each_entry’ 105 | hashmap__for_each_entry(&slab_hash, cur, bkt) | ^~~~~~~~~~~~~~~~~~~~~~~ /home/namhyung/project/linux/tools/perf/util/hashmap.h:170:31: error: invalid type argument of ‘->’ (have ‘struct hashmap’) 170 | for (cur = map->buckets[bkt]; cur; cur = cur->next) | ^~ util/bpf_lock_contention.c:105:9: note: in expansion of macro ‘hashmap__for_each_entry’ 105 | hashmap__for_each_entry(&slab_hash, cur, bkt) | ^~~~~~~~~~~~~~~~~~~~~~~ Cc: bpf@vger.kernel.org Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20241009202009.884884-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-14Merge tag 'v6.12-rc3' into perf-tools-nextNamhyung Kim
To get the fixes in the current perf-tools tree. Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-14perf tools: Fix compiler error in util/tool_pmu.cNamhyung Kim
util/tool_pmu.c: In function 'evsel__tool_pmu_read': util/tool_pmu.c:419:55: error: passing argument 2 of 'tool_pmu__read_event' from incompatible pointer type [-Werror=incompatible-pointer-types] 419 | if (!tool_pmu__read_event(ev, &val)) { | ^~~~ | | | long unsigned int * util/tool_pmu.c:335:56: note: expected 'u64 *' {aka 'long long unsigned int *'} but argument is of type 'long unsigned int *' 335 | bool tool_pmu__read_event(enum tool_pmu_event ev, u64 *result) | ~~~~~^~~~~~ Link: https://lore.kernel.org/r/Zw1XIGML32VaxE0t@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-14tools/perf/tests: Remove duplicate evlist__delete in tests/tool_pmu.cAthira Rajeev
The testcase for tool_pmu failed in powerpc as below: ./perf test -v "Parsing without PMU name" 8: Tool PMU : 8.1: Parsing without PMU name : FAILED! This happens when parse_events results in either skip or fail of an event. Because the code invokes evlist__delete(evlist) and "goto out". ret = parse_events(evlist, str, &err); if (ret) { evlist__delete(evlist); But in the "out" section also evlist__delete happens. out: evlist__delete(evlist); return ret; Hence remove the duplicate evlist__delete from the first path in the testcase With the change: # ./perf test -v "Parsing without PMU name" 8: Tool PMU : 8.1: Parsing without PMU name : Ok Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: akanksha@linux.ibm.com Cc: hbathini@linux.ibm.com Cc: kjain@linux.ibm.com Cc: maddy@linux.ibm.com Cc: disgoel@linux.vnet.ibm.com Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20241013170732.71339-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-14tools/perf/tests: Fix compilation error with strncpy in tests/tool_pmuAthira Rajeev
perf fails to compile on systems with GCC version11 as below: In file included from /usr/include/string.h:519, from /home/athir/perf-tools-next/tools/include/linux/bitmap.h:5, from /home/athir/perf-tools-next/tools/perf/util/pmu.h:5, from /home/athir/perf-tools-next/tools/perf/util/evsel.h:14, from /home/athir/perf-tools-next/tools/perf/util/evlist.h:14, from tests/tool_pmu.c:3: In function ‘strncpy’, inlined from ‘do_test’ at tests/tool_pmu.c:25:3: /usr/include/bits/string_fortified.h:95:10: error: ‘__builtin_strncpy’ specified bound 128 equals destination size [-Werror=stringop-truncation] 95 | return __builtin___strncpy_chk (__dest, __src, __len, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 96 | __glibc_objsize (__dest)); | ~~~~~~~~~~~~~~~~~~~~~~~~~ The compile error is from strncpy refernce in do_test: strncpy(str, tool_pmu__event_to_str(ev), sizeof(str)); This behaviour is not observed with GCC version 8, but observed with GCC version 11 . This is message from gcc for detecting truncation while using strncpu. Use snprintf instead of strncpy here to be safe. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: akanksha@linux.ibm.com Cc: hbathini@linux.ibm.com Cc: kjain@linux.ibm.com Cc: maddy@linux.ibm.com Cc: disgoel@linux.vnet.ibm.com Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20241013173742.71882-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf report: Display columns Predicted/Abort/Cycles in --branch-historyThomas Falcon
The original commit message: " Use current sort mechanism but the real .se_cmp() just returns 0 so that new columns "Predicted", "Abort" and "Cycles" are created in display but actually these keys are not the sort keys. For example: Overhead Source:Line Symbol Shared Object Predicted Abort Cycles ........ ............ ........ ............. ......... ..... ...... 38.25% div.c:45 [.] main div 97.6% 0 3 " Update missed commit from series "perf report: Show branch flags/cycles in --branch-history callgraph view" to apply to current repository so that new columns described above are visible. Link to original series: https://lore.kernel.org/lkml/1477876794-30749-1-git-send-email-yao.jin@linux.intel.com/ Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Suggested-by: Kan Liang <kan.liang@linux.intel.com> Co-developed-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Thomas Falcon <thomas.falcon@intel.com> Signed-off-by: Thomas Falcon <thomas.falcon@intel.com> Link: https://lore.kernel.org/r/20241010184046.203822-1-thomas.falcon@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf tests: Add tool PMU testIan Rogers
Ensure parsing with and without PMU creates events with the expected config values. This ensures the tool.json doesn't get out of sync with tool_pmu_event enum. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-11-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf tool_pmu: Switch to standard pmu functions and json descriptionsIan Rogers
Use the regular PMU approaches with tool json events to reduce the amount of special tool_pmu code - tool_pmu__config_terms and tool_pmu__for_each_event_cb are removed. Some functions remain, like tool_pmu__str_to_event, as conveniences to metricgroups. Add tool_pmu__skip_event/tool_pmu__num_skip_events to handle the case that tool json events shouldn't appear on certain architectures. This isn't done in jevents.py due to complexity in the empty-pmu-events.c and when all vendor json is built into the tool. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-10-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf jevents: Add tool event json under a common architectureIan Rogers
Introduce the notion of a common architecture/model that can be used to find event tables for common PMUs like the tool PMU. By having tool events be json standard PMU attribute configuration, descriptions, etc. can be used and these routines are already optimized for things like binary searching. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-9-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf tool_pmu: Move expr literals to tool_pmuIan Rogers
Add the expr literals like "#smt_on" as tool events, this allows stat events to give the values. On my laptop with hyperthreading enabled: ``` $ perf stat -e "has_pmem,num_cores,num_cpus,num_cpus_online,num_dies,num_packages,smt_on,system_tsc_freq" true Performance counter stats for 'true': 0 has_pmem 8 num_cores 16 num_cpus 16 num_cpus_online 1 num_dies 1 num_packages 1 smt_on 2,496,000,000 system_tsc_freq 0.001113637 seconds time elapsed 0.001218000 seconds user 0.000000000 seconds sys ``` And with hyperthreading disabled: ``` $ perf stat -e "has_pmem,num_cores,num_cpus,num_cpus_online,num_dies,num_packages,smt_on,system_tsc_freq" true Performance counter stats for 'true': 0 has_pmem 8 num_cores 16 num_cpus 8 num_cpus_online 1 num_dies 1 num_packages 0 smt_on 2,496,000,000 system_tsc_freq 0.000802115 seconds time elapsed 0.000000000 seconds user 0.000806000 seconds sys ``` As zero matters for these values, in stat-display should_skip_zero_counter only skip the zero value if it is not the first aggregation index. The tool event implementations are used in expr but not evaluated as events for simplicity. Also core_wide isn't made a tool event as it requires command line parameters. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-8-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf tool_pmu: Rename perf_tool_event__* to tool_pmu__*Ian Rogers
Now the events are associated with the tool PMU, rename the functions to reflect this. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-7-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf tool_pmu: Rename enum perf_tool_event to tool_pmu_eventIan Rogers
To better reflect the events listed are from the tool PMU. Rename the enum values from PERF_TOOL_* to TOOL_PMU__EVENT_*. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-6-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf tool_pmu: Factor tool events into their own PMUIan Rogers
Rather than treat tool events as a special kind of event, create a tool only PMU where the events/aliases match the existing duration_time, user_time and system_time events. Remove special parsing and printing support for the tool events, but add function calls for when PMU functions are called on a tool_pmu. Move the tool PMU code in evsel into tool_pmu.c to better encapsulate the tool event behavior in that file. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-5-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf parse-events: Expose/rename config_term_nameIan Rogers
Expose config_term_name as parse_events__term_type_str so that PMUs not in pmu.c may access it. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-4-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf pmu: Allow hardcoded terms to be applied to attributesIan Rogers
Hard coded terms like "config=10" are skipped by perf_pmu__config assuming they were already applied to a perf_event_attr by parse event's config_attr function. When doing a reverse number to name lookup in perf_pmu__name_from_config, as the hardcoded terms aren't applied the config value is incorrect leading to misses or false matches. Fix this by adding a parameter to have perf_pmu__config apply hardcoded terms too (not just in parse event's config_term_common). Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-3-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf pmu: Simplify an asprintf error messageIan Rogers
Use ifs rather than ?: to avoid a large compound statement. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20241002032016.333748-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-10perf tools: Remove unused color_fwrite_linesDr. David Alan Gilbert
color_fwrite_lines() was added by 2009's commit 8fc0321f1ad0 ("perf_counter tools: Add color terminal output support") but has never been used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20241009003938.254936-1-linux@treblig.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-09perf test x86: Fix typo in intel-pt-testThomas Falcon
Change function name "is_hydrid" to "is_hybrid". Signed-off-by: Thomas Falcon <thomas.falcon@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20241007194758.78659-1-thomas.falcon@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-09perf probe: Remove unused add_perf_probe_eventsDr. David Alan Gilbert
add_perf_probe_events has been unused since 2015's commit b02137cc6550 ("perf probe: Move print logic into cmd_probe()") which confusingly now uses perf_add_probe_events. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20240929010659.430208-1-linux@treblig.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-08Merge tag 'perf-tools-fixes-for-v6.12-1-2024-10-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix an assert() to handle captured and unprocessed ARM CoreSight CPU traces - Fix static build compilation error when libdw isn't installed or is too old - Add missing include when building with !HAVE_DWARF_GETLOCATIONS_SUPPORT - Add missing refcount put on 32-bit DSOs - Fix disassembly of user space binaries by setting the binary_type of DSO when loading - Update headers with the kernel sources, including asound.h, sched.h, fcntl, msr-index.h, irq_vectors.h, socket.h, list_sort.c and arm64's cputype.h * tag 'perf-tools-fixes-for-v6.12-1-2024-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf cs-etm: Fix the assert() to handle captured and unprocessed cpu trace perf build: Fix build feature-dwarf_getlocations fail for old libdw perf build: Fix static compilation error when libdw is not installed perf dwarf-aux: Fix build with !HAVE_DWARF_GETLOCATIONS_SUPPORT tools headers arm64: Sync arm64's cputype.h with the kernel sources perf tools: Cope with differences for lib/list_sort.c copy from the kernel tools check_headers.sh: Add check variant that excludes some hunks perf beauty: Update copy of linux/socket.h with the kernel sources tools headers UAPI: Sync the linux/in.h with the kernel sources perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools include UAPI: Sync linux/fcntl.h copy with the kernel sources tools include UAPI: Sync linux/sched.h copy with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources perf vdso: Missed put on 32-bit dsos perf symbol: Set binary_type of dso when loading
2024-10-03perf test attr: Add back missing topdown eventsVeronika Molnarova
With the patch 0b6c5371c03c "Add missing topdown metrics events" eight topdown metric events with numbers ranging from 0x8000 to 0x8700 were added to the test since they were added as 'perf stat' default events. Later the patch 951efb9976ce "Update no event/metric expectations" kept only 4 of those events(0x8000-0x8300). Currently, the topdown events with numbers 0x8400 to 0x8700 are missing from the list of expected events resulting in a failure. Add back the missing topdown events. Fixes: 951efb9976ce ("perf test attr: Update no event/metric expectations") Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com> Tested-by: Ian Rogers <irogers@google.com> Cc: mpetlan@redhat.com Link: https://lore.kernel.org/r/20240311081611.7835-1-vmolnaro@redhat.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-03perf arm-spe: Dump metadata with version 2Leo Yan
This commit dumps metadata with version 2. It dumps metadata for header and per CPU data respectively in the arm_spe_print_info() function to support metadata version 2 format. After: 0 0 0x3c0 [0x1b0]: PERF_RECORD_AUXTRACE_INFO type: 4 Header version :2 Header size :4 PMU type v2 :13 CPU number :8 Magic :0x1010101010101010 CPU # :0 Num of params :3 MIDR :0x410fd801 PMU Type :-1 Min Interval :0 Magic :0x1010101010101010 CPU # :1 Num of params :3 MIDR :0x410fd801 PMU Type :-1 Min Interval :0 Magic :0x1010101010101010 CPU # :2 Num of params :3 MIDR :0x410fd870 PMU Type :13 Min Interval :1024 Magic :0x1010101010101010 CPU # :3 Num of params :3 MIDR :0x410fd870 PMU Type :13 Min Interval :1024 Magic :0x1010101010101010 CPU # :4 Num of params :3 MIDR :0x410fd870 PMU Type :13 Min Interval :1024 Magic :0x1010101010101010 CPU # :5 Num of params :3 MIDR :0x410fd870 PMU Type :13 Min Interval :1024 Magic :0x1010101010101010 CPU # :6 Num of params :3 MIDR :0x410fd850 PMU Type :-1 Min Interval :0 Magic :0x1010101010101010 CPU # :7 Num of params :3 MIDR :0x410fd850 PMU Type :-1 Min Interval :0 Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Besar Wicaksono <bwicaksono@nvidia.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241003184302.190806-6-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-03perf arm-spe: Support metadata version 2Leo Yan
This commit is to support metadata version 2 and at the meantime it is backward compatible for version 1's format. The metadata version 1 doesn't include the ARM_SPE_HEADER_VERSION field. As version 1 is fixed with two u64 fields, by checking the metadata size, it distinguishes the metadata is version 1 or version 2 (and any new versions if later will have). For version 2, it reads out CPU number and retrieves the metadata info for every CPU. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Besar Wicaksono <bwicaksono@nvidia.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241003184302.190806-5-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-03perf arm-spe: Save per CPU information in metadataLeo Yan
Save the Arm SPE information on a per-CPU basis. This approach is easier in the decoding phase for retrieving metadata based on the CPU number of every Arm SPE record. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Besar Wicaksono <bwicaksono@nvidia.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241003184302.190806-4-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-03perf arm-spe: Calculate meta data sizeLeo Yan
The metadata is designed to contain a header and per CPU information. The arm_spe_find_cpus() function is introduced to identify how many CPUs support ARM SPE. Based on the CPU number, calculates the metadata size. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Besar Wicaksono <bwicaksono@nvidia.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241003184302.190806-3-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-03perf arm-spe: Define metadata header version 2Leo Yan
The first version's metadata header structure doesn't include a field to indicate a header version, which is not friendly for extension. Define the metadata version 2 format with a new header structure and extend per CPU's metadata. In the meantime, the old metadata header will still be supported for backward compatibility. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Besar Wicaksono <bwicaksono@nvidia.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241003184302.190806-2-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-03perf list: update option desc in man pageYoshihiro Furudera
There is a difference between the SYNOPSIS section of the help message and the man page (tools/perf/Documentation/perf-list.txt) for the perf list command. After checking, we found that the help message reflected the latest specifications. Therefore, revised the SYNOPSIS section of the man page to match the help message. Signed-off-by: Yoshihiro Furudera <fj5100bi@fujitsu.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Weilin Wang <weilin.wang@intel.com> Cc: Liang Link: https://lore.kernel.org/r/20241003002404.2592094-1-fj5100bi@fujitsu.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-03perf test: Restore sample rate for perf_event_attrVeronika Molnarova
Test "Setup struct perf_event_attr" consists of multiple test cases that can affect the max sample rate value for perf events. Some test cases check this value as it should not be lowered under the set minimum for the given test. Currently, it is possible for the test cases to affect each other as the previous tests can lower the sample rate, leading to a possible failure of some of the future test cases as the value is not restored at any point. # 10: Setup struct perf_event_attr: --- start --- test child forked, pid 104220 Using CPUID 0x00000000413fd0c1 running './tests/attr/test-record-C0' Current sample rate: 10000 running './tests/attr/test-record-basic' Current sample rate: 900 running './tests/attr/test-record-branch-any' Current sample rate: 600 running './tests/attr/test-record-dummy-C0' Current sample rate: 600 expected sample_period=4000, got 600 FAILED './tests/attr/test-record-dummy-C0' - match failure Restore the max sample rate value for perf events to a reasonable value before each test case if its value was lowered too much to ensure the same conditions for each test case. # 10: Setup struct perf_event_attr: --- start --- test child forked, pid 107222 Using CPUID 0x00000000413fd0c1 running './tests/attr/test-record-C0' Current sample rate: 10000 running './tests/attr/test-record-basic' Current sample rate: 800 running './tests/attr/test-record-branch-any' Current sample rate: 700 unsupp './tests/attr/test-record-branch-any' running './tests/attr/test-record-branch-filter-any' Current sample rate: 10000 running './tests/attr/test-record-count' Current sample rate: 10000 running './tests/attr/test-record-data' Current sample rate: 600 running './tests/attr/test-record-dummy-C0' Current sample rate: 800 running './tests/attr/test-record-freq' Current sample rate: 10000 ... Cc: Michael Petlan <mpetlan@redhat.com> Cc: Radostin Stoyanov <rstoyano@redhat.com> Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com> Link: https://lore.kernel.org/r/20241003125136.15918-1-vmolnaro@redhat.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02perf trace: Keep exited threads for summaryMichael Petlan
Since 9ffa6c7512ca ("perf machine thread: Remove exited threads by default") perf cleans exited threads up, but as said, sometimes they are necessary to be kept. The mentioned commit does not cover all the cases, we also need the information to construct the summary table in perf-trace. Before: # perf trace -s true Summary of events: After: # perf trace -s -- true Summary of events: true (383382), 64 events, 91.4% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ mmap 8 0 0.150 0.013 0.019 0.031 11.90% mprotect 3 0 0.045 0.014 0.015 0.017 6.47% openat 2 0 0.014 0.006 0.007 0.007 9.73% munmap 1 0 0.009 0.009 0.009 0.009 0.00% access 1 1 0.009 0.009 0.009 0.009 0.00% pread64 4 0 0.006 0.001 0.001 0.002 4.53% fstat 2 0 0.005 0.001 0.002 0.003 37.59% arch_prctl 2 1 0.003 0.001 0.002 0.002 25.91% read 1 0 0.003 0.003 0.003 0.003 0.00% close 2 0 0.003 0.001 0.001 0.001 3.86% brk 1 0 0.002 0.002 0.002 0.002 0.00% rseq 1 0 0.001 0.001 0.001 0.001 0.00% prlimit64 1 0 0.001 0.001 0.001 0.001 0.00% set_robust_list 1 0 0.001 0.001 0.001 0.001 0.00% set_tid_address 1 0 0.001 0.001 0.001 0.001 0.00% execve 1 0 0.000 0.000 0.000 0.000 0.00% [namhyung: simplified the condition] Fixes: 9ffa6c7512ca ("perf machine thread: Remove exited threads by default") Reported-by: Veronika Molnarova <vmolnaro@redhat.com> Signed-off-by: Michael Petlan <mpetlan@redhat.com> Link: https://lore.kernel.org/r/20240927151926.399474-1-mpetlan@redhat.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02perf/test: perf test 86 fails on s390Thomas Richter
Command perf test 86 fails on s390: # perf test -F 86 ping 868299 [007] 28248.013596: probe_libc:inet_pton_1: (3ff95948020) 3ff95948020 inet_pton+0x0 (inlined) 3ff9595e6e7 text_to_binary_address+0x1007 (inlined) 3ff9595e6e7 gaih_inet+0x1007 (inlined) FAIL: expected backtrace entry \ "main\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" got "3ff9595e6e7 gaih_inet+0x1007 (inlined)" 86: probe libc's inet_pton & backtrace it with ping : FAILED! # The root cause is a new stack layout, two functions have been added as seen below. # perf script | tac | grep -m1 '^ping' -B9 | tac ping 866856 [007] 25979.494921: probe_libc:inet_pton: (3ff8ec48020) 3ff8ec48020 inet_pton+0x0 (inlined) new --> 3ff8ec5e6e7 text_to_binary_address+0x1007 (inlined) new --> 3ff8ec5e6e7 gaih_inet+0x1007 (inlined) 3ff8ec5e6e7 getaddrinfo+0x1007 (/usr/lib64/libc.so.6) 2aa3fe04bf5 main+0xff5 (/usr/bin/ping) 3ff8eb34a5b __libc_start_call_main+0x8b (/usr/lib64/libc.so.6) 3ff8eb34b5d __libc_start_main@GLIBC_2.2+0xad (inlined) 2aa3fe06a1f [unknown] (/usr/bin/ping) # The new functions in the call chain are: - text_to_binary_address() - gaih_inet(). Both functions are inlined and do not show up in the output of the nm command: # nm -a /usr/lib64/libc.so.6 | \ grep -E '(text_to_binary_address|gaih_inet)$' # There is no possibility to add these 2 functions depending on their existance in the C library. Add text_to_binary_address() and gaih_inet() to the list of expected functions in an compatible way and extend the regular expression. On s390 the backtrace can now be Before After probe_libc:inet_pton probe_libc:inet_pton inet_pton inet_pton getaddrinfo getaddrinfo | text_to_binary_address main main | gaih_inet Output after: # perf test -F 86 86: probe libc's inet_pton & backtrace it with ping : Ok # Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: agordeev@linux.ibm.com Cc: gor@linux.ibm.com Cc: hca@linux.ibm.com Cc: sumanthk@linux.ibm.com Link: https://lore.kernel.org/r/20241001124224.3370306-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02tools/perf: Allow inherit + PERF_SAMPLE_READ when opening eventsBen Gainey
The "perf record" tool will now default to this new mode if the user specifies a sampling group when not in system-wide mode, and when "--no-inherit" is not specified. This change updates evsel to allow the combination of inherit and PERF_SAMPLE_READ. A fallback is implemented for kernel versions where this feature is not supported. Signed-off-by: Ben Gainey <ben.gainey@arm.com> Cc: james.clark@arm.com Link: https://lore.kernel.org/r/20241001121505.1009685-3-ben.gainey@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02tools/perf: Correctly calculate sample period for inherited SAMPLE_READ valuesBen Gainey
Sample period calculation in deliver_sample_value is updated to calculate the per-thread period delta for events that are inherit + PERF_SAMPLE_READ. When the sampling event has this configuration, the read_format.id is used with the tid from the sample to lookup the storage of the previously accumulated counter total before calculating the delta. All existing valid configurations where read_format.value represents some global value continue to use just the read_format.id to locate the storage of the previously accumulated total. perf_sample_id is modified to support tracking per-thread values, along with the existing global per-id values. In the per-thread case, values are stored in a hash by tid within the perf_sample_id, and are dynamically allocated as the number is not known ahead of time. Signed-off-by: Ben Gainey <ben.gainey@arm.com> Cc: james.clark@arm.com Link: https://lore.kernel.org/r/20241001121505.1009685-2-ben.gainey@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02perf test: Skip not fail syscall tp fields test when insufficient permissionsIan Rogers
Clean up return value to be TEST_* rather than unspecific integer. Add test case skip reason. Skip test if EACCES comes back from evsel__newtp. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20241001052327.7052-5-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02perf test: Skip not fail tp fields test when insufficient permissionsIan Rogers
Clean up return value to be TEST_* rather than unspecific integer. Add test case skip reason. Skip test if EACCES comes back from evsel__newtp. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20241001052327.7052-4-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02perf test: Fix memory leaks on event-times error pathsIan Rogers
These error paths occur without sufficient permissions. Fix the memory leaks to make leak sanitizer happier. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20241001052327.7052-3-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02perf stat: Fix affinity memory leaks on error pathIan Rogers
Missed cleanup when an error occurs. Fixes: 49de179577e7 ("perf stat: No need to setup affinities when starting a workload") Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20241001052327.7052-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02perf jevents: Don't stop at the first matched pmu when searching a events tableKan Liang
The "perf all PMU test" fails on a Coffee Lake machine. The failure is caused by the below change in the commit e2641db83f18 ("perf vendor events: Add/update skylake events/metrics"). + { + "BriefDescription": "This 48-bit fixed counter counts the UCLK cycles", + "Counter": "FIXED", + "EventCode": "0xff", + "EventName": "UNC_CLOCK.SOCKET", + "PerPkg": "1", + "PublicDescription": "This 48-bit fixed counter counts the UCLK cycles.", + "Unit": "cbox_0" } The other cbox events have the unit name "CBOX", while the fixed counter has a unit name "cbox_0". So the events_table will maintain separate entries for cbox and cbox_0. The perf_pmus__print_pmu_events() calculates the total number of events, allocate an aliases buffer, store all the events into the buffer, sort, and print all the aliases one by one. The problem is that the calculated total number of events doesn't match the stored events in the aliases buffer. The perf_pmu__num_events() is used to calculate the number of events. It invokes the pmu_events_table__num_events() to go through the entire events_table to find all events. Because of the pmu_uncore_alias_match(), the suffix of uncore PMU will be ignored. So the events for cbox and cbox_0 are all counted. When storing events into the aliases buffer, the perf_pmu__for_each_event() only process the events for cbox. Since a bigger buffer was allocated, the last entry are all 0. When printing all the aliases, null will be outputted, and trigger the failure. The mismatch was introduced from the commit e3edd6cf6399 ("perf pmu-events: Reduce processed events by passing PMU"). The pmu_events_table__for_each_event() stops immediately once a pmu is set. But for uncore, especially this case, the method is wrong and mismatch what perf does in the perf_pmu__num_events(). With the patch, $ perf list pmu | grep -A 1 clock.socket unc_clock.socket [This 48-bit fixed counter counts the UCLK cycles. Unit: uncore_cbox_0 $ perf test "perf all PMU test" 107: perf all PMU test : Ok Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/all/202407101021.2c8baddb-oliver.sang@intel.com/ Fixes: e3edd6cf6399 ("perf pmu-events: Reduce processed events by passing PMU") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Benjamin Gray <bgray@linux.ibm.com> Cc: Xu Yang <xu.yang_2@nxp.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241001021431.814811-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-10-02perf cs-etm: Fix the assert() to handle captured and unprocessed cpu traceIlkka Koskinen
If one builds perf with DEBUG=1, captures data on multiple CPUs and finally runs 'perf report -C <cpu>' for only one of the cpus, assert() aborts the program. This happens because there are empty queues with format set. This patch changes the condition to abort only if a queue is not empty and if the format is unset. $ make -C tools/perf DEBUG=1 CORESIGHT=1 CSLIBS=/usr/lib CSINCLUDES=/usr/include install $ perf record -o kcore --kcore -e cs_etm/timestamp/k -s -C 0-1 dd if=/dev/zero of=/dev/null bs=1M count=1 $ perf report --input kcore/data --vmlinux=/home/ikoskine/projects/linux/vmlinux -C 1 Aborted (core dumped) Fixes: 57880a7966be510c ("perf: cs-etm: Allocate queues for all CPUs") Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linux.dev> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240924233930.5193-1-ilkka@os.amperecomputing.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02perf build: Fix build feature-dwarf_getlocations fail for old libdwYang Jihong
For libdw versions below 0.177, need to link libdl.a in addition to libbebl.a during static compilation, otherwise feature-dwarf_getlocations compilation will fail. Before: $ make LDFLAGS=-static BUILD: Doing 'make -j20' parallel build <SNIP> Makefile.config:483: Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157 <SNIP> $ cat ../build/feature/test-dwarf_getlocations.make.output /usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libebl.a(eblclosebackend.o): in function `ebl_closebackend': (.text+0x20): undefined reference to `dlclose' collect2: error: ld returned 1 exit status After: $ make LDFLAGS=-static <SNIP> Auto-detecting system features: ... dwarf: [ on ] <SNIP> $ ./perf probe Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] or: perf probe [<options>] --del '[GROUP:]EVENT' ... or: perf probe --list [GROUP:]EVENT ... <SNIP> Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw") Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240919013513.118527-3-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02perf build: Fix static compilation error when libdw is not installedYang Jihong
If libdw is not installed in build environment, the output of 'pkg-config --modversion libdw' is empty, causing LIBDW_VERSION_2 to be empty and the shell test will have the following error: /bin/sh: 1: test: -lt: unexpected operator Before: $ pkg-config --modversion libdw Package libdw was not found in the pkg-config search path. Perhaps you should add the directory containing `libdw.pc' to the PKG_CONFIG_PATH environment variable No package 'libdw' found $ make LDFLAGS=-static -j16 BUILD: Doing 'make -j20' parallel build <SNIP> Package libdw was not found in the pkg-config search path. Perhaps you should add the directory containing `libdw.pc' to the PKG_CONFIG_PATH environment variable No package 'libdw' found /bin/sh: 1: test: -lt: unexpected operator After: 1. libdw is not installed: $ pkg-config --modversion libdw Package libdw was not found in the pkg-config search path. Perhaps you should add the directory containing `libdw.pc' to the PKG_CONFIG_PATH environment variable No package 'libdw' found $ make LDFLAGS=-static -j16 BUILD: Doing 'make -j20' parallel build <SNIP> Package libdw was not found in the pkg-config search path. Perhaps you should add the directory containing `libdw.pc' to the PKG_CONFIG_PATH environment variable No package 'libdw' found Makefile.config:473: No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR 2. libdw version is lower than 0.177 $ pkg-config --modversion libdw 0.176 $ make LDFLAGS=-static -j16 BUILD: Doing 'make -j20' parallel build <SNIP> Auto-detecting system features: ... dwarf: [ on ] <SNIP> INSTALL libsubcmd_headers INSTALL libapi_headers INSTALL libperf_headers INSTALL libsymbol_headers INSTALL libbpf_headers LINK perf 3. libdw version is higher than 0.177 $ pkg-config --modversion libdw 0.186 $ make LDFLAGS=-static -j16 BUILD: Doing 'make -j20' parallel build <SNIP> Auto-detecting system features: ... dwarf: [ on ] <SNIP> CC util/bpf-utils.o CC util/pfm.o LD util/perf-util-in.o LD perf-util-in.o AR libperf-util.a LINK perf Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw") Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Yang Jihong <yangjihong@bytedance.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20240919013513.118527-2-yangjihong@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02perf dwarf-aux: Fix build with !HAVE_DWARF_GETLOCATIONS_SUPPORTJames Clark
The linked fixes commit added an #include "dwarf-aux.h" to disasm.h which gets picked up in a lot of places. Without HAVE_DWARF_GETLOCATIONS_SUPPORT the stubs return an errno, so include errno.h to fix the following build error: In file included from util/disasm.h:8, from util/annotate.h:16, from builtin-top.c:23: util/dwarf-aux.h: In function 'die_get_var_range': util/dwarf-aux.h:183:10: error: 'ENOTSUP' undeclared (first use in this function) 183 | return -ENOTSUP; | ^~~~~~~ Fixes: 782959ac248ac3cb ("perf annotate: Add "update_insn_state" callback function to handle arch specific instruction tracking") Signed-off-by: James Clark <james.clark@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20241001123625.1063153-1-james.clark@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02perf tools: Cope with differences for lib/list_sort.c copy from the kernelArnaldo Carvalho de Melo
With 6d74e1e371d43a7b ("tools/lib/list_sort: remove redundant code for cond_resched handling") we need to use the newly added hunk based exceptions when comparing the copy we carry in tools/lib/ to the original file, do it by adding the hunks that we know will be the expected diff. If at some point the original file is updated in other parts, then we should flag and check the file for update. Acked-by: Kuan-Wei Chiu <visitorckw@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/lkml/20240930202136.16904-3-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-10-02tools check_headers.sh: Add check variant that excludes some hunksArnaldo Carvalho de Melo
With 6d74e1e371d43a7b ("tools/lib/list_sort: remove redundant code for cond_resched handling") we end up with a multi-line variation in the merge_final() implementation, one that the simple line based exceptions we had so far can't cope. Thus this check has been failing: Warning: Kernel ABI header differences: diff -u tools/lib/list_sort.c lib/list_sort.c So add a new check routine that uses grep -vf to exclude some hunks that we store in the tools/perf/check-header_ignore_hunks/ directory. This first patch is just the new check routine, the next one will use it to check lib/list_sort.c. Acked-by: Kuan-Wei Chiu <visitorckw@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/lkml/20240930202136.16904-2-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-30perf tests: Add more topdown events regroup testsDapeng Mi
Add more test cases to cover all supported topdown events regroup cases. Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Cc: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20240913084712.13861-7-dapeng1.mi@linux.intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-09-30perf tests: Add topdown events counting and sampling testsDapeng Mi
Add counting and leader sampling tests to verify topdown events including raw format can be reordered correctly. Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Cc: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20240913084712.13861-6-dapeng1.mi@linux.intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-09-30perf tests: Add leader sampling test in record testsDapeng Mi
Add leader sampling test to validate event counts are captured into record and the count value is consistent. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Cc: Yongwei Ma <yongwei.ma@intel.com> Link: https://lore.kernel.org/r/20240913084712.13861-5-dapeng1.mi@linux.intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-18 18:22:42 +0000