| Age | Commit message (Collapse) | Author |
|---|
|
Currently the tool redirects make stdout + stderr, and only shows them
if the make command fails.
This means build warnings aren't shown to the user.
This change prints the contents of stderr even if make succeeds, under
the assumption these are only build warnings or other messages the user
likely wants to see.
We drop stdout from the raised exception since we can no longer easily
collate stdout and stderr and just showing the stderr seems fine.
Example with a warning:
[14:56:35] Building KUnit Kernel ...
../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’:
../lib/kunit/kunit-test.c:19:6: warning: unused variable ‘unused’ [-Wunused-variable]
19 | int unused;
| ^~~~~~
[14:56:40] Starting KUnit Kernel ...
Note the stderr has a trailing \n, and since we use print, we add
another, but it helps separate make and kunit.py output.
Example with a build error:
[15:02:45] Building KUnit Kernel ...
ERROR:root:../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’:
../lib/kunit/kunit-test.c:19:2: error: unknown type name ‘invalid_type’
19 | invalid_type *test = data;
| ^~~~~~~~~~~~
...
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When --build_dir is provided use it and do not pollute source directory
which even can be mounted over network or read-only.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When --build_dir is provided use it and do not pollute source directory
which even can be mounted over network or read-only.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CalledProcessError stores the output of the failed process as `bytes`,
not a `str`.
So when we log it on build error, the make output is all crammed into
one line with "\n" instead of actually printing new lines.
After this change, we get readable output with new lines, e.g.
> CC lib/kunit/kunit-example-test.o
> In file included from ../lib/kunit/test.c:9:
> ../include/kunit/test.h:22:1: error: unknown type name ‘invalid_type_that_causes_compile’
> 22 | invalid_type_that_causes_compile errors;
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> make[3]: *** [../scripts/Makefile.build:283: lib/kunit/test.o] Error 1
Secondly, trying to concat exceptions to strings will fail with
> TypeError: can only concatenate str (not "OSError") to str
so fix this with an explicit cast to str.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Alltests flag evidently stopped working when run from outside of the
root of the source tree, so fix that. Also add an additional broken
config to the broken_on_uml config.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Direct stderr to subprocess.STDOUT so error messages get included in the
subprocess.CalledProcessError exceptions output field. This results in
more meaningful error messages for the user.
This is already being done in the make_allyesconfig method. Do the same
for make_mrproper, make_olddefconfig, and make methods.
With this, failures on unclean trees [1] will give users an error
message that includes:
"The source tree is not clean, please run 'make ARCH=um mrproper'"
[1] https://bugzilla.kernel.org/show_bug.cgi?id=205219
Signed-off-by: Will Chen <chenwi@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The kunit.py utility builds an ARCH=um kernel and then runs it. Add
optional --make_options flag to kunit.py allowing for the operator to
specify extra build options.
This allows use of the clang compiler for kunit:
tools/testing/kunit/kunit.py run --defconfig \
--make_options CC=clang --make_options HOSTCC=clang
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Implemented the functionality to run all KUnit tests through kunit_tool
by specifying an --alltests flag, which builds UML with allyesconfig
enabled, and consequently runs every KUnit test. A new function was
added to kunit_kernel: make_allyesconfig.
Firstly, if --alltests is specified, kunit.py triggers build_um_kernel
which call make_allyesconfig. This function calls the make command,
disables the broken configs that would otherwise prevent UML from
building, then starts the kernel with all possible configurations
enabled. All stdout and stderr is sent to test.log and read from there
then fed through kunit_parser to parse the tests to the user. Also added
a signal_handler in case kunit is interrupted while running.
Tested: Run under different conditions such as testing with
--raw_output, testing program interrupt then immediately running kunit
again without --alltests and making sure to clean the console.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Previous error message for invalid kunitconfig was vague. Added to it so
that it lists invalid fields and prompts for them to be removed. Added
validate_config function returning whether or not this kconfig is valid.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This commit renames 'kunitconfig' to '.kunitconfig' so that it can be
automatically ignored by git and do not disturb people who want to type
'kernel/' by pressing only the 'k' and then 'tab' key.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
'kunit' writes the 'test.log' under the kernel source directory even
though a 'build_dir' option is given. As users who use the option might
expect the outputs to be placed under the specified directory, this
commit modifies the logic to write the log file under the 'build_dir'.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If both '--build_dir' and '--defconfig' are given, the handling of
'--defconfig' ignores '--build_dir' option. This commit modifies the
behavior to respect '--build_dir' option.
Reported-by: Brendan Higgins <brendanhiggins@google.com>
Suggested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add defconfig for UML and a fragment that can be used to configure other
architectures for building KUnit tests. Add option to kunit_tool to use
a defconfig to create the kunitconfig.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The ultimate goal is to create minimal isolated test binaries; in the
meantime we are using UML to provide the infrastructure to run tests, so
define an abstract way to configure and run tests that allow us to
change the context in which tests are built without affecting the user.
This also makes pretty and dynamic error reporting, and a lot of other
nice features easier.
kunit_config.py:
- parse .config and Kconfig files.
kunit_kernel.py: provides helper functions to:
- configure the kernel using kunitconfig.
- build the kernel with the appropriate configuration.
- provide function to invoke the kernel and stream the output back.
kunit_parser.py: parses raw logs returned out by kunit_kernel and
displays them in a user friendly way.
test_data/*: samples of test data for testing kunit.py, kunit_config.py,
etc.
Signed-off-by: Felix Guo <felixguoxiuping@gmail.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
