| Age | Commit message (Collapse) | Author |
|---|
|
By default main RSS table should change to include all queues.
When user sets a specific RSS config the driver should preserve it,
even when queue count changes. Driver should refuse to deactivate
queues used in the user-set RSS config.
For additional contexts driver should still refuse to deactivate
queues in use. Whether the contexts should get resized like
context 0 when queue count increases is a bit unclear. I anticipate
most drivers today don't do that. Since main use case for additional
contexts is to set the indir table - it doesn't seem worthwhile to
care about behavior of the default table too much. Don't test that.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap up sending traffic and checking in which queues it landed
in a helper.
The method used for testing is to send a lot of iperf traffic
and check which queues received the most packets. Those should
be the queues where we expect iperf to land - either because we
installed a filter for the port iperf uses, or we didn't and
expect it to use context 0.
Contexts get disjoint queue sets, but the main context (AKA context 0)
may receive some background traffic (noise).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The basic test may fail without resetting the RSS indir table.
Use the .exec() method to run cleanup early since we re-test
with traffic that returning to default state works.
While at it reformat the doc a tiny bit.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As predicted by David running the test on a machine with a single
interface is a bit unreliable. We try to send 20k packets with
iperf and expect fewer than 10k packets on the default context.
The test isn't very quick, iperf will usually send 100k packets
by the time we stop it. So we're off by 5x on the number of iperf
packets but still expect default context to only get the hardcoded
10k. The intent is to make sure we get noticeably less traffic
on the default context. Use half of the resulting iperf traffic
instead of the hard coded 10k.
Link: https://patch.msgid.link/20240702233728.4183387-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use just added defer().
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240627185502.3069139-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test is unusual in that overriding TESTS does not change the tests to
be run. Split the individual tests into several functions and invoke them
through tests_run() as appropriate.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the previous patch, the function test_span_failable() is always
called with should_fail=1. Drop the argument and streamline the code.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mirroring tests are currently run in a skip_hw and optionally a skip_sw
mode. The former tests the SW datapath, the latter the HW datapath, if
available. In order to be able to test SW datapath on HW loopbacks, traps
are installed on ingress to get traffic from the HW datapath to the SW one.
This adds an unnecessary complexity when it would be much simpler to just
use a veth-based topology to test the SW datapath. Thus drop all the code
that supports this dual testing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The argument is not used by these functions except to propagate it for
ultimately no purpose.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add tests focusing on indirection table configuration and
creating extra RSS contexts in drivers which support it.
$ export NETIF=eth0 REMOTE_...
$ ./drivers/net/hw/rss_ctx.py
KTAP version 1
1..8
ok 1 rss_ctx.test_rss_key_indir
ok 2 rss_ctx.test_rss_context
ok 3 rss_ctx.test_rss_context4
# Increasing queue count 44 -> 66
# Failed to create context 32, trying to test what we got
ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32
ok 5 rss_ctx.test_rss_context_overlap
ok 6 rss_ctx.test_rss_context_overlap2
# .. sprays traffic like a headless chicken ..
not ok 7 rss_ctx.test_rss_context_out_of_order
ok 8 rss_ctx.test_rss_context4_create_with_cfg
# Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0
Note that rss_ctx.test_rss_context_out_of_order fails with the device
I tested with, but it seems to be a device / driver bug.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Teach the load generator how to wait for at least given number
of packets to be received. This will be useful for filtering
where we'll want to send a non-trivial number of packets and
make sure they landed in right queues.
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some devices DMA stats to the host periodically. Add a helper
which can wait for that to happen, based on frequency reported
by the driver in ethtool.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One may use tools/testing/selftests/drivers/net/virtio_net/config
for example for vng build command like this one:
$ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config
In that case, the needed kernel config options are not turned on.
Add the missed kernel config options.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240617072614.75fe79e7@kernel.org/
Reported-by: Matthieu Baerts <matttbe@kernel.org>
Closes: https://lore.kernel.org/netdev/1a63f209-b1d4-4809-bc30-295a5cafa296@kernel.org/
Fixes: ccfaed04db5e ("selftests: virtio_net: add initial tests")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240619061748.1869404-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Testing a network device that has large numbers of bytes/packets may
overflow. Using stats64 when comparing fixes this problem.
I tripped on this while iterating on a qstats patch for mlx5. See below
for confirmation without my added code that this is a bug.
Before this patch (with added debugging output):
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
rstat: 481708634 qstat: 666201639514 key: tx-bytes
not ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
Note the huge delta above ^^^ in the rtnl vs qstats.
After this patch:
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
It looks like rtnl_fill_stats in net/core/rtnetlink.c will attempt to
copy the 64bit stats into a 32bit structure which is probably why this
behavior is occurring.
To show this is happening, you can get the underlying stats that the
stats.py test uses like this:
$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifi-index": 7}'
And examine the output (heavily snipped to show relevant fields):
'stats': {
'multicast': 3739197,
'rx-bytes': 1201525399,
'rx-packets': 56807158,
'tx-bytes': 492404458,
'tx-packets': 1200285371,
'stats64': {
'multicast': 3739197,
'rx-bytes': 35561263767,
'rx-packets': 56807158,
'tx-bytes': 666212335338,
'tx-packets': 1200285371,
The stats.py test prior to this patch was using the 'stats' structure
above, which matches the failure output on my system.
Comparing side by side, rx-bytes and tx-bytes, and getting ethtool -S
output:
rx-bytes stats: 1201525399
rx-bytes stats64: 35561263767
rx-bytes ethtool: 36203402638
tx-bytes stats: 492404458
tx-bytes stats64: 666212335338
tx-bytes ethtool: 666215360113
Note that the above was taken from a system with an mlx5 NIC, which only
exposes ndo_get_stats64.
Based on the ethtool output and qstat output, it appears that stats.py
should be updated to use the 'stats64' structure for accurate
comparisons when packet/byte counters get very large.
To confirm that this was not related to the qstats code I was iterating
on, I booted a kernel without my driver changes and re-ran the test
which shows the qstats are skipped (as they don't exist for mlx5):
NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum # SKIP qstats not supported by the device
ok 4 stats.qstat_by_ifindex # SKIP No ifindex supports qstats
But, fetching the stats using the CLI
$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifi-index": 7}'
Shows the same issue (heavily snipped for relevant fields only):
'stats': {
'multicast': 105489,
'rx-bytes': 530879526,
'rx-packets': 751415,
'tx-bytes': 2510191396,
'tx-packets': 27700323,
'stats64': {
'multicast': 105489,
'rx-bytes': 530879526,
'rx-packets': 751415,
'tx-bytes': 15395093284,
'tx-packets': 27700323,
Comparing side by side with ethtool -S on the unmodified mlx5 driver:
tx-bytes stats: 2510191396
tx-bytes stats64: 15395093284
tx-bytes ethtool: 17718435810
Fixes: f0e6c86e4bab ("testing: net-drv: add a driver test for stats reporting")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240520235850.190041-1-jdamato@fastly.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a selftest for netdev generic netlink. For now there is only a
single test that exercises the `queue-get` API.
The test works with netdevsim by default or with a real device by
setting NETIF.
Add a timeout param to cmd() since ethtool -L can take a long time on
real devices.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Run tools/testing/selftest/net/csum.c as part of drv-net.
This binary covers multiple scenarios, based on arguments given,
for both IPv4 and IPv6:
- Accept UDP correct checksum
- Detect UDP invalid checksum
- Accept TCP correct checksum
- Detect TCP invalid checksum
- Transmit UDP: basic checksum offload
- Transmit UDP: zero checksum conversion
The test direction is reversed between receive and transmit tests, so
that the NIC under test is always the local machine.
In total this adds up to 12 testcases, with more to follow. For
conciseness, I replaced individual functions with a function factory.
Also detect hardware offload feature availability using Ethtool
netlink and skip tests when either feature is off. This need may be
common for offload feature tests and eventually deserving of a thin
wrapper in lib.py.
Missing are the PF_PACKET based send tests ('-P'). These use
virtio_net_hdr to program hardware checksum offload. Which requires
looking up the local MAC address and (harder) the MAC of the next hop.
I'll have to give it some though how to do that robustly and where
that code would belong.
Tested:
make -C tools/testing/selftests/ \
TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft
cd /tmp/ksft
sudo NETIF=ens4 REMOTE_TYPE=ssh \
REMOTE_ARGS="root@10.40.0.2" \
LOCAL_V4="10.40.0.1" \
REMOTE_V4="10.40.0.2" \
./run_kselftest.sh -t drivers/net/hw:csum.py
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240507154216.501111-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests covering following functionality on KSZ9477 switch family:
- default port priority
- global DSCP to Internal Priority Mapping
- apptrust configuration
This script was tested on KSZ9893R
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bugs in memory allocation failure paths are quite common.
Add a test exercising those paths based on qstat and page pool
failure hook.
Running on bnxt:
# ./drivers/net/hw/pp_alloc_fail.py
KTAP version 1
1..1
# ethtool -G change retval: success
ok 1 pp_alloc_fail.test_pp_alloc
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
I initially wrote this test to validate commit be43b7489a3c ("net/mlx5e:
RX, Fix page_pool allocation failure recovery for striding rq") but mlx5
still doesn't have qstat. So I run it on bnxt, and while bnxt survives
I found the problem fixed in commit 730117730709 ("eth: bnxt: fix counting
packets discarded due to OOM and netpoll").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While we are not very interested in testing performance
it's useful to be able to generate a lot of traffic.
iperf is the simplest way of getting relatively high PPS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We created a separate directory for HW-only tests, recently.
Glue in the Python test library there, Python is a bit annoying
when it comes to using library code located "lower"
in the directory structure.
Reuse the Env class, but let tests require non-nsim setup.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Throw a slightly more helpful exception when env variables
are partially populated. Prior to this change we'd get
a dictionary key exception somewhere later on.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240425222341.309778-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The shell lexer is not helping much, do very basic parsing
manually.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240425222341.309778-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add more info to the README. It's also now copied to GitHub for
increased visibility:
https://github.com/linux-netdev/nipa/wiki/Running-driver-tests
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240425222341.309778-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce initial tests for virtio_net driver. Focus on feature testing
leveraging previously introduced debugfs feature filtering
infrastructure. Add very basic ping and F_MAC feature tests.
To run this, do:
$ make -C tools/testing/selftests/ TARGETS=drivers/net/virtio_net/ run_tests
Run it on a system with 2 virtio_net devices connected back-to-back
on the hypervisor.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Wrap typical checks like whether given command used by the test
is available in helpers.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
More complex tests often have to spawn a background process,
like a server which will respond to requests or tcpdump.
Add support for creating such processes using the with keyword:
with bkg("my-daemon", ..):
# my-daemon is alive in this block
My initial thought was to add this support to cmd() directly
but it runs the command in the constructor, so by the time
we __enter__ it's too late to make sure we used "background=True".
Second useful helper transplanted from net_helper.sh is
wait_port_listen().
The test itself uses socat, which insists on v6 addresses
being wrapped in [], it's not the only command which requires
this format, so add the wrapped address to env. The hope
is to save test code from checking if address is v6.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While writing tests with a lot more cases I got tired of having
to jump back and forth to add the name of the test to the ksft_run()
list. Most unittest frameworks do some name matching, e.g. assume
that functions with names starting with test_ are test cases.
Support similar flow in ksft_run(). Let the author list the desired
prefixes. globals() need to be passed explicitly, IDK how to work
around that.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a very simple test for testing with a remote system.
Both IPv4 and IPv6 connectivity is optional, later change
will add checks to skip tests based on available addresses.
Using netdevsim:
$ ./run_kselftest.sh -t drivers/net:ping.py
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net: ping.py
# KTAP version 1
# 1..2
# ok 1 ping.test_v4
# ok 2 ping.test_v6
# # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: ping.py
Command line SSH:
$ NETIF=virbr0 REMOTE_TYPE=ssh REMOTE_ARGS=root@192.168.122.123 \
LOCAL_V4=192.168.122.1 REMOTE_V4=192.168.122.123 \
./tools/testing/selftests/drivers/net/ping.py
KTAP version 1
1..2
ok 1 ping.test_v4
ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Existing devices placed in netns (and using net.config):
$ cat drivers/net/net.config
NETIF=veth0
REMOTE_TYPE=netns
REMOTE_ARGS=red
LOCAL_V4="192.168.1.1"
REMOTE_V4="192.168.1.2"
$ ./run_kselftest.sh -t drivers/net:ping.py
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net: ping.py
# KTAP version 1
# 1..2
# ok 1 ping.test_v4
# ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity
# # Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
endpoint
Nothing surprising here, hopefully. Wrap the variables from
the environment into a class or spawn a netdevsim based env
and pass it to the tests.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tests with a remote end will use a different class,
for clarity, but will also need to parse the env.
So factor parsing the env out to a function.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the remote endpoint "model". To execute most meaningful device
driver tests we need to be able to communicate with a remote system,
and have it send traffic to the device under test.
Various test environments will have different requirements.
0) "Local" netdevsim-based testing can simply use net namespaces.
netdevsim supports connecting two devices now, to form a veth-like
construct.
1) Similarly on hosts with multiple NICs, the NICs may be connected
together with a loopback cable or internal device loopback.
One interface may be placed into separate netns, and tests
would proceed much like in the netdevsim case. Note that
the loopback config or the moving of one interface
into a netns is not expected to be part of selftest code.
2) Some systems may need to communicate with the remote endpoint
via SSH.
3) Last but not least environment may have its own custom communication
method.
Fundamentally we only need two operations:
- run a command remotely
- deploy a binary (if some tool we need is built as part of kselftests)
Wrap these two in a class. Use dynamic loading to load the Remote
class. This will allow very easy definition of other communication
methods without bothering upstream code base.
Stick to the "simple" / "no unnecessary abstractions" model for
referring to the remote endpoints. The host / remote object are
passed as an argument to the usual cmd() or ip() invocation.
For example:
ip("link show", json=True, host=remote)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test for dumping qstats device by device.
ksft framework grows a ksft_raises() helper, to be used
under with, which should be familiar to unittest users.
Link: https://lore.kernel.org/r/20240420023543.3300306-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test cases need to exit with non-zero status if they failed,
we currently don't do that:
# KTAP version 1
# 1..3
# # At /root/ksft-net-drv/drivers/net/./ping.py line 18:
# # Check failed 1 != 2
# not ok 1 ping.test_v4
# ok 2 ping.test_v6
# ok 3 ping.test_tcp
# # Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: ping.py
^^^^
It's a bit tempting to make the exit part of ksft_run(),
but that only works well for very trivial setups. We can
revisit this later, if people forget to call ksft_exit().
Link: https://lore.kernel.org/r/20240417231146.2435572-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Real driver testing will obviously require enabling more
options, but will require more manual setup in the first
place. For CIs running purely software tests we need
to enable netdevsim.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240416004556.1618804-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethtool dump includes the lanes parameter only when the port is up.
Therefore, the ethtool_lanes.sh test waits for ports to come before testing
the lanes parameter.
In some cases, the test considers the port as up, but the lanes parameter
is not yet dumped although assumed to be, resulting in ethtool_lanes.sh
test failure.
To avoid that, ensure that the lanes parameter is indeed dumped by waiting
for it explicitly, before preforming the test cases.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The tests use the constant TC_HIT_TIMEOUT when waiting on the counter
values. However it does not include tc_common.sh where the counter is
specified. The test has been robust in our testing, which means the counter
is bumped quickly enough that the updated value is available already on the
first iteration. Nevertheless it's not correct. Include tc_common.sh as
appropriate.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some log_test calls are done in a loop, and lead to the same log output.
This might prove tricky to deduplicate for automated tools. Instead, roll
the unique information from log_info to log_test, and drop the log_info.
This also leads to more compact and clearer output.
This change prompts rewording the messages so that they are not excessively
long.
Some check_err messages do not indicate what the issue actually is, so
reword them to say it's a "ping with", like is the case in some other
instances in this test.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When rx-pktsNtoM reports a range that involves very low-valued range, such
as 0-64, the calculated length of the packet will be -4, because FCS is
subtracted from the value. mausezahn then confuses the value for an option
and bails out. As a result, the test dumps many mausezahn error messages.
Instead, cap the value at 0. mausezahn will use an appropriate minimum
packet length.
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a very simple test to make sure drivers report expected
stats. Drivers which implement FEC or pause configuration
should report relevant stats. Qstats must be reported,
at least packet and byte counts, and they must match
total device stats.
Tested with netdevsim, bnxt, in-tree and installed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add drivers/net as a target for mixed-use tests.
The setup is expected to work similarly to the forwarding tests.
Since we only need one interface (unlike forwarding tests)
read the target device name from NETIF. If not present we'll
try to run the test against netdevsim.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The SKIP return should be used for cases where tooling of the machine under
test is lacking. For cases where HW is lacking, the appropriate outcome is
XFAIL.
This is the case with ethtool_rmon and mlxsw_lib. For these, introduce a
new helper, log_test_xfail().
Do the same for router_mpath_nh_lib. Note that it will be fixed using a
more reusable way in a following patch.
For the two resource_scale selftests, the log should simply not be written,
because there is no problem.
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/3d668d8fb6fa0d9eeb47ce6d9e54114348c7c179.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the selftests that are not supposed to run on veth pairs are now in
their own dedicated directory, the skip_on_veth logic can go away. Drop it
from the selftests, and from lib.sh.
Cc: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/63b470e10d65270571ee7de709b31672ce314872.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tests in net/forwarding are generally expected to be HW-independent.
There are however several tests that, while not depending on any HW in
particular, nevertheless depend on being used on HW interfaces. Placing
these selftests to net/forwarding is confusing, because the selftest will
just report it can't be run on veth pairs. At the same time, placing them
to a particular driver's selftests subdirectory would be wrong.
Instead, add a new directory, drivers/net/hw, where these generic but HW
independent selftests should be placed. Move over several such tests
including one helper library.
Since typically these tests will not be expected to run, omit the directory
drivers/net/hw from the TARGETS list in selftests/Makefile. Retain a
Makefile in the new directory itself, so that a user can make -C into that
directory and act on those tests explicitly.
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Cc: Danielle Ratson <danieller@nvidia.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Cc: Johannes Nixdorf <jnixdorf-oss@avm.de>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/e11dae1f62703059e9fc2240004288ac7cc15756.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The longest running netdevsim test, nexthop.sh, currently takes
5 min to finish. Around 260s to be exact, and 310s on a debug kernel.
The default timeout in selftest is 45sec, so we need an explicit
config. Give ourselves some headroom and use 10min.
Commit under Fixes isn't really to "blame" but prior to that
netdevsim tests weren't integrated with kselftest infra
so blaming the tests themselves doesn't seem right, either.
Fixes: 8ff25dac88f6 ("netdevsim: add Makefile for selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Changes :
- "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh
- "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh
Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228120701.422264-1-pvkumar5749404@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Connect two netdevsim ports in different namespaces together, then send
packets between them using socat.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 6151ff9c7521 ("selftests: netdevsim: use suitable existing dummy
file for flash test") introduced a nice trick to the devlink flashing
test. Instead of user having to create a file under /lib/firmware
we just pick the first one that already exists.
Sadly, in AWS Linux there are no files directly under /lib/firmware,
only in subdirectories. Don't limit the search to -maxdepth 1.
We can use the %P print format to get the correct path for files
inside subdirectories:
$ find /lib/firmware -type f -printf '%P\n' | head -1
intel-ucode/06-1a-05
The full path is /lib/firmware/intel-ucode/06-1a-05
This works in GNU find, busybox doesn't have printf at all,
so we're not making it worse.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240224050658.930272-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/udp.c
f796feabb9f5 ("udp: add local "peek offset enabled" flag")
56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")
Adjacent changes:
net/unix/garbage.c
aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
11498715f266 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
