| Age | Commit message (Collapse) | Author |
|---|
|
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported a KMSAN splat in __unix_walk_scc() while backtracking
edge_stack after finalising SCC.
Let's add a test case exercising the path.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://patch.msgid.link/20240702160428.10153-2-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The openvswitch selftest is difficult to debug for anyone that isn't
directly familiar with the openvswitch module and the specifics of the
test cases. Many times when something fails, the debug log will be
sparsely populated and it takes some time to understand where a failure
occured.
Increase the amount of details logged to the debug log by trapping all
'info' logs, and all 'ovs_sbx' commands.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240702132830.213384-4-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, the openvswitch.sh test suites would not attempt to autoload
the openvswitch module. The idea was that a user who is manually running
tests might not even have the OVS module loaded or configured for their
own development. However, if the kernel module is configured, and the
module can be autoloaded then we should just attempt to load it and run
the tests. This is especially true in the CI environments, where the CI
tests should be able to rely on auto loading to get the test suite running.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240702132830.213384-3-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We found that since some tests rely on the TCP SYN timeouts to cause flow
misses, the default test suite timeout of 45 seconds is quick to be
exceeded. Bump the timeout to 15 minutes.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240702132830.213384-2-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support building the C YNL userspace library into one big static file.
We can then link selftests against it for easy to use C netlink
interface.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20240628003253.1694510-14-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
Patch #1 to #11 to shrink memory consumption for transaction objects:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
Series from Florian Westphal. For the record, I have mangled patch #1
to add nft_trans_container_*() and use if for every transaction object.
I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
at the beginning of the container transaction object. And few minor
cleanups, any new bugs are of my own.
Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.
Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.
Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
default conntrack timeouts via nfnetlink_cttimeout API, from
Lin Ma.
Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
larger secctx names than the existing 256 bytes length.
Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
nfnetlink_queue, from Florian Westphal.
Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This implements what I was describing in [1]. When writing a test
author can schedule cleanup / undo actions right after the creation
completes, eg:
cmd("touch /tmp/file")
defer(cmd, "rm /tmp/file")
defer() takes the function name as first argument, and the rest are
arguments for that function. defer()red functions are called in
inverse order after test exits. It's also possible to capture them
and execute earlier (in which case they get automatically de-queued).
undo = defer(cmd, "rm /tmp/file")
# ... some unsafe code ...
undo.exec()
As a nice safety all exceptions from defer()ed calls are captured,
printed, and ignored (they do make the test fail, however).
This addresses the common problem of exceptions in cleanup paths
often being unhandled, leading to potential leaks.
There is a global action queue, flushed by ksft_run(). We could support
function level defers too, I guess, but there's no immediate need..
Link: https://lore.kernel.org/all/877cedb2ki.fsf@nvidia.com/ # [1]
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240627185502.3069139-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Exception handlers print the result and use continue
to skip the non-exception result printing. This makes
inserting common post-test code hard. Refactor to
avoid the continues and have only one ktap_result() call.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240627185502.3069139-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the existing test to exercise UDP GSO egress through devices with
various offload capabilities, including lack of checksum offload, which is
the default case for TUN/TAP devices.
Test against a dummy device because it is simpler to set up then TUN/TAP.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626-linux-udpgso-v2-2-422dfcbd6b48@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If userspace program exits while the queue its subscribed to has packets
those need to be discarded.
commit dc21c6cc3d69 ("netfilter: nfnetlink_queue: acquire rcu_read_lock()
in instance_destroy_rcu()") fixed a (harmless) rcu splat that could be
triggered in this case.
Add a test case to cover this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Nothing calls these.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These functions are not used anymore.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The selftest does not use functions from mirror_gre_lib, ditch the import.
It does not use arping either, so drop the require_command as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mirroring tests are currently run in a skip_hw and optionally a skip_sw
mode. The former tests the SW datapath, the latter the HW datapath, if
available. In order to be able to test SW datapath on HW loopbacks, traps
are installed on ingress to get traffic from the HW datapath to the SW one.
This adds an unnecessary complexity when it would be much simpler to just
use a veth-based topology to test the SW datapath. Thus drop all the code
that supports this dual testing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mirroring selftests work by sending ICMP traffic between two hosts.
Along the way, this traffic is mirrored to a gretap netdevice, and counter
taps are then installed strategically along the path of the mirrored
traffic to verify the mirroring took place.
The problem with this is that besides mirroring the primary traffic, any
other service traffic is mirrored as well. At the same time, because the
tests need to work in HW-offloaded scenarios, the ability of the device to
do arbitrary packet inspection should not be taken for granted. Most tests
therefore simply use matchall, one uses flower to match on IP address.
As a result, the selftests are noisy, because besides the primary ICMP
traffic, any amount of other service traffic is mirrored as well.
mirror_test() accommodated this noisiness by giving the counters an
allowance of several packets. But in the previous patch, where possible,
counter taps were changed to match only on an exact ICMP message. At least
in those cases, we can demand an exact number of packets to match.
Where the tap is installed on a connective netdevice, the exact matching is
not practical (though with u32, anything is possible). In those places,
there should still be some leeway -- and probably bigger than before,
because experience shows that these tests are very noisy.
To that end, change mirror_test() so that it can be either called with an
exact number to expect, or with an expression. Where leeway is needed,
adjust callers to pass a ">= 10" instead of mere 10.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mirroring selftests work by sending ICMP traffic between two hosts.
Along the way, this traffic is mirrored to a gretap netdevice, and counter
taps are then installed strategically along the path of the mirrored
traffic to verify the mirroring took place.
The problem with this is that besides mirroring the primary traffic, any
other service traffic is mirrored as well. At the same time, because the
tests need to work in HW-offloaded scenarios, the ability of the device to
do arbitrary packet inspection should not be taken for granted. Most tests
therefore simply use matchall, one uses flower to match on IP address.
As a result, the selftests are noisy, because besides the primary ICMP
traffic, any amount of other service traffic is mirrored as well.
However, often the counter tap is installed at the remote end of the gretap
tunnel. Since this is a SW-datapath scenario anyway, we can make the filter
arbitrarily accurate.
Thus in this patch, add parameters forward_type and backward_type to
several mirroring test helpers, as some other helpers already have. Then
change do_test_span_dir_ips() to instead of installing one generic tap and
using it for test in both directions, install the tap for each direction
separately, matching on the ICMP type given by these parameters.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test works by sending packets through a tunnel, whence they are
forwarded to a LAG. One of the LAG children is removed from the LAG prior
to the exercise, and the test then counts how many packets pass through the
other one. The issue with this is that it counts all packets, not just the
encapsulated ones.
So instead add a second gretap endpoint to receive the sent packets, and
check reception counters there.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The argument $dir has a fallback value of "ingress". Move the fallback from
the usage site to the argument definition block to make the fact clearer.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The argument is not used by these functions except to propagate it for
ultimately no purpose.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some functions, argument-forwarding through "$@" without listing the
individual arguments explicitly is fundamental to the operation of a
function. E.g. xfail_on_veth() should be able to run various tests in the
fail-to-xfail regime, and usage of "$@" is appropriate as an abstraction
mechanism. For functions such as simple_if_init(), $@ is a handy way to
pass an array.
In other functions, it's merely a mechanism to save some typing, which
however ends up obscuring the real arguments and makes life hard for those
that end up reading the code.
This patch adds some of the implicit function arguments and correspondingly
expands $@'s. In several cases this will come in handy as following patches
adjust the parameter lists.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The pmtu testing will require that the OVS module is installed,
so do that.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-8-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current pmtu test infrastucture requires an installed copy of the
ovs-vswitchd userspace. This means that any automated or constrained
environments may not have the requisite tools to run the tests. However,
the pmtu tests don't require any special classifier processing. Indeed
they are only using the vswitchd in the most basic mode - as a NORMAL
switch.
However, the ovs-dpctl kernel utility can now program all the needed basic
flows to allow traffic to traverse the tunnels and provide support for at
least testing some basic pmtu scenarios. More complicated flow pipelines
can be added to the internal ovs test infrastructure, but that is work for
the future. For now, enable the most common cases - wide mega flows with
no other prerequisites.
Enhance the pmtu testing to try testing using the internal utility, first.
As a fallback, if the internal utility isn't running, then try with the
ovs-vswitchd userspace tools.
Additionally, make sure that when the pyroute2 package is not available
the ovs-dpctl utility will error out to properly signal an error has
occurred and skip using the internal utility.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240625172245.233874-7-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current iteration of IPv6 support requires explicit fields to be set
in addition to not properly support the actual IPv6 addresses properly.
With this change, make it so that the ipv6() bare option is usable to
create wildcarded flows to match broad swaths of ipv6 traffic.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-6-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This will be used when setting details about the tunnel to use as
transport. There is a difference between the ODP format between tunnel():
the 'key' flag is not actually a flag field, so we don't support it in the
same way that the vswitchd userspace supports displaying it.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240625172245.233874-5-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These will be used in upcoming commits to set specific attributes for
interacting with tunnels. Since set() will use the key parsing routine, we
also make sure to prepend it with an open paren, for the action parsing to
properly understand it.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-4-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Until recently, the ovs-dpctl utility was used with a limited actions set
and didn't need to have support for multiple similar actions. However,
when adding support for tunnels, it will be important to support multiple
set() actions in a single flow. When printing these actions, the existing
code will be unable to print all of the sets - it will only print the
first.
Refactor this code to be easier to read and support multiple actions of the
same type in an action list.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-3-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The OVS module can operate in conjunction with various types of
tunnel ports. These are created as either explicit tunnel vport
types, OR by creating a tunnel interface which acts as an anchor
for the lightweight tunnel support.
This patch adds the ability to add tunnel ports to an OVS
datapath for testing various scenarios with tunnel ports. With
this addition, the vswitch "plumbing" will at least be able to
push packets around using the tunnel vports. Future patches
will add support for setting required tunnel metadata for lwts
in the datapath. The end goal will be to push packets via these
tunnels, and will be used in an upcoming commit for testing the
path MTU.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-2-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling")
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To catch regression, let's check ioctl(SIOCATMARK) after every
send() and recv() calls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.
Without fix:
# RUN msg_oob.no_peek.oob ...
# msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
# oob: Test terminated by assertion
# FAIL msg_oob.no_peek.oob
not ok 2 msg_oob.no_peek.oob
With fix:
# RUN msg_oob.no_peek.oob ...
# OK msg_oob.no_peek.oob
ok 2 msg_oob.no_peek.oob
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When OOB data is in recvq, we can detect it with epoll by checking
EPOLLPRI.
This patch add checks for EPOLLPRI after every send() and recv() in
all test cases.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).
This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed
without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently.
This patch adds some test cases for SO_OOBINLINE.
Note the new test cases found two bugs in TCP.
1) After reading OOB data with non-inline mode, we can re-read
the data by setting SO_OOBINLINE.
# RUN msg_oob.no_peek.inline_oob_ahead_break ...
# msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world
# msg_oob.c:147:inline_oob_ahead_break:TCP :oworld
# OK msg_oob.no_peek.inline_oob_ahead_break
ok 14 msg_oob.no_peek.inline_oob_ahead_break
2) The head OOB data is dropped if SO_OOBINLINE is disabled
if a new OOB data is queued.
# RUN msg_oob.no_peek.inline_ex_oob_drop ...
# msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x
# msg_oob.c:172:inline_ex_oob_drop:TCP :y
# msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:inline_ex_oob_drop:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.inline_ex_oob_drop
ok 17 msg_oob.no_peek.inline_ex_oob_drop
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, recv() is stopped at a consumed OOB skb even if a new
OOB skb is queued and we can ignore the old OOB skb.
>>> from socket import *
>>> c1, c2 = socket(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'hellowor', MSG_OOB)
8
>>> c2.recv(1, MSG_OOB) # consume OOB data stays at middle of recvq.
b'r'
>>> c1.send(b'ld', MSG_OOB)
2
>>> c2.recv(10) # recv() stops at the old consumed OOB
b'hellowo' # should be 'hellowol'
manage_oob() should not stop recv() at the old consumed OOB skb if
there is a new OOB data queued.
Note that TCP behaviour is apparently wrong in this test case because
we can recv() the same OOB data twice.
Without fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo
# msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol
# msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8)
# ex_oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ahead_break
not ok 11 msg_oob.no_peek.ex_oob_ahead_break
With fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol
# msg_oob.c:147:ex_oob_ahead_break:TCP :helloworl
# OK msg_oob.no_peek.ex_oob_ahead_break
ok 11 msg_oob.no_peek.ex_oob_ahead_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While testing, I found some weird behaviour on the TCP side as well.
For example, TCP drops the preceding OOB data when queueing a new
OOB data if the old OOB data is at the head of recvq.
# RUN msg_oob.no_peek.ex_oob_drop ...
# msg_oob.c:146:ex_oob_drop:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop:TCP :Resource temporarily unavailable
# msg_oob.c:146:ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:ex_oob_drop:TCP :Invalid argument
# OK msg_oob.no_peek.ex_oob_drop
ok 9 msg_oob.no_peek.ex_oob_drop
# RUN msg_oob.no_peek.ex_oob_drop_2 ...
# msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop_2:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.ex_oob_drop_2
ok 10 msg_oob.no_peek.ex_oob_drop_2
This patch allows AF_UNIX's MSG_OOB implementation to produce different
results from TCP when operations are guarded with tcp_incompliant{}.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
and its peer recv()s "hell" and "o".
>>> c2.recv(10)
b'hell'
>>> c2.recv(1, MSG_OOB)
b'o'
Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.
Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.
>>> c2.setblocking(False) # This causes -EAGAIN even with available data
>>> c2.recv(5)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
BlockingIOError: [Errno 11] Resource temporarily unavailable
However, next recv() will return the following available data, "world".
>>> c2.recv(5)
b'world'
When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.
Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().
This patch also adds a test case that covers the issue.
Without fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
# msg_oob.c:135:ex_oob_break:Expected:ld
# msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
# ex_oob_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_break
not ok 8 msg_oob.no_peek.ex_oob_break
With fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# OK msg_oob.no_peek.ex_oob_break
ok 8 msg_oob.no_peek.ex_oob_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After consuming OOB data, recv() reading the preceding data must break at
the OOB skb regardless of MSG_PEEK.
Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is
not compliant with TCP.
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
>>> c2.recv(1, MSG_OOB)
b'o'
>>> c2.recv(9, MSG_PEEK) # This should return b'hell'
b'hellworld' # even with enough buffer.
Let's fix it by returning NULL for consumed skb and unlinking it only if
MSG_PEEK is not specified.
This patch also adds test cases that add recv(MSG_PEEK) before each recv().
Without fix:
# RUN msg_oob.peek.oob_ahead_break ...
# msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld
# msg_oob.c:135:oob_ahead_break:Expected:hell
# msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4)
# oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.peek.oob_ahead_break
not ok 13 msg_oob.peek.oob_ahead_break
With fix:
# RUN msg_oob.peek.oob_ahead_break ...
# OK msg_oob.peek.oob_ahead_break
ok 13 msg_oob.peek.oob_ahead_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found
some bizarre behaviour.
The new selftest validates every MSG_OOB operation against TCP as a
reference implementation.
This patch adds only a few tests with basic send() and recv() that
do not fail.
The following patches will add more test cases for SO_OOBINLINE, SIGURG,
EPOLLPRI, and SIOCATMARK.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality,
thus there are discrepancies between TCP behaviour.
Also, the test uses fork() to create message producer, and it's not
easy to understand and add more test cases.
Let's remove test_unix_oob.c and rewrite a new test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests focusing on indirection table configuration and
creating extra RSS contexts in drivers which support it.
$ export NETIF=eth0 REMOTE_...
$ ./drivers/net/hw/rss_ctx.py
KTAP version 1
1..8
ok 1 rss_ctx.test_rss_key_indir
ok 2 rss_ctx.test_rss_context
ok 3 rss_ctx.test_rss_context4
# Increasing queue count 44 -> 66
# Failed to create context 32, trying to test what we got
ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32
ok 5 rss_ctx.test_rss_context_overlap
ok 6 rss_ctx.test_rss_context_overlap2
# .. sprays traffic like a headless chicken ..
not ok 7 rss_ctx.test_rss_context_out_of_order
ok 8 rss_ctx.test_rss_context4_create_with_cfg
# Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0
Note that rss_ctx.test_rss_context_out_of_order fails with the device
I tested with, but it seems to be a device / driver bug.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some devices DMA stats to the host periodically. Add a helper
which can wait for that to happen, based on frequency reported
by the driver in ethtool.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We use random ports for communication. As Willem predicted
this leads to occasional failures. Try to check if port is
already in use by opening a socket and binding to that port.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It seems that there is no definition for config IP_GRE, and it is not a
dependency of other configs, so remove it.
linux$ find -name Kconfig | xargs grep "IP_GRE"
<-- nothing
There is a IPV6_GRE config defined in net/ipv6/Kconfig. It only depends
on NET_IPGRE_DEMUX but not IP_GRE.
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240624055539.2092322-1-yujie.liu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
amt.sh is written in bash, not sh.
So, shebang should be bash.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
diag_uid selftest failed on NIPA where the received nlmsg_type is
NLMSG_ERROR [0] because CONFIG_UNIX_DIAG is not set [1] by default
and sock_diag_lock_handler() failed to load the module.
# # Starting 2 tests from 2 test cases.
# # RUN diag_uid.uid.1 ...
# # diag_uid.c:159:1:Expected nlh->nlmsg_type (2) == SOCK_DIAG_BY_FAMILY (20)
# # 1: Test terminated by assertion
# # FAIL diag_uid.uid.1
# not ok 1 diag_uid.uid.1
Let's add all AF_UNIX Kconfig to the config file under af_unix dir
so that NIPA consumes it.
Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/104-diag-uid/stdout [0]
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/config [1]
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240617073033.0cbb829d@kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
this selftest is designed for evaluating the SRv6 End.DX6 behavior
used with netfilter(rpfilter), in this example, for implementing
IPv6 L3 VPN use cases.
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
this selftest is designed for evaluating the SRv6 End.DX4 behavior
used with netfilter(rpfilter), in this example, for implementing
IPv4 L3 VPN use cases.
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Netlink flags, although they don't have payload at the netlink level,
are represented as having "True" as value in pyroute2.
Without it, trying to add a flow with a flag-type action (e.g: pop_vlan)
fails with the following traceback:
Traceback (most recent call last):
File "[...]/ovs-dpctl.py", line 2498, in <module>
sys.exit(main(sys.argv))
^^^^^^^^^^^^^^
File "[...]/ovs-dpctl.py", line 2487, in main
ovsflow.add_flow(rep["dpifindex"], flow)
File "[...]/ovs-dpctl.py", line 2136, in add_flow
reply = self.nlm_request(
^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/nlsocket.py", line 822, in nlm_request
return tuple(self._genlm_request(*argv, **kwarg))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/generic/__init__.py", line 126, in
nlm_request
return tuple(super().nlm_request(*argv, **kwarg))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/nlsocket.py", line 1124, in nlm_request
self.put(msg, msg_type, msg_flags, msg_seq=msg_seq)
File "[...]/pyroute2/netlink/nlsocket.py", line 389, in put
self.sendto_gate(msg, addr)
File "[...]/pyroute2/netlink/nlsocket.py", line 1056, in sendto_gate
msg.encode()
File "[...]/pyroute2/netlink/__init__.py", line 1245, in encode
offset = self.encode_nlas(offset)
^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/__init__.py", line 1560, in encode_nlas
nla_instance.setvalue(cell[1])
File "[...]/pyroute2/netlink/__init__.py", line 1265, in setvalue
nlv.setvalue(nla_tuple[1])
~~~~~~~~~^^^
IndexError: list index out of range
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
