| Age | Commit message (Collapse) | Author |
|---|
|
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/nv-idregs:
: Changes to exposure of NV features, courtesy of Marc Zyngier
:
: Apply NV-specific feature restrictions at reset rather than at the point
: of KVM_RUN. This makes the true feature set visible to userspace, a
: necessary step towards save/restore support or NV VMs.
:
: Add an additional vCPU feature flag for selecting the E2H0 flavor of NV,
: such that the VHE-ness of the VM can be applied to the feature set.
KVM: arm64: selftests: Test that TGRAN*_2 fields are writable
KVM: arm64: Allow userspace to write ID_AA64MMFR0_EL1.TGRAN*_2
KVM: arm64: Advertise FEAT_ECV when possible
KVM: arm64: Make ID_AA64MMFR4_EL1.NV_frac writable
KVM: arm64: Allow userspace to limit NV support to nVHE
KVM: arm64: Move NV-specific capping to idreg sanitisation
KVM: arm64: Enforce NV limits on a per-idregs basis
KVM: arm64: Make ID_REG_LIMIT_FIELD_ENUM() more widely available
KVM: arm64: Consolidate idreg callbacks
KVM: arm64: Advertise NV2 in the boot messages
KVM: arm64: Mark HCR.EL2.{NV*,AT} RES0 when ID_AA64MMFR4_EL1.NV_frac is 0
KVM: arm64: Mark HCR.EL2.E2H RES0 when ID_AA64MMFR1_EL1.VH is zero
KVM: arm64: Hide ID_AA64MMFR2_EL1.NV from guest and userspace
arm64: cpufeature: Handle NV_frac as a synonym of NV2
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We leave most of the defconfigs alone (there's over 70 of them),
but let's remove CONFIG_SCHED_DEBUG from the scheduler self-test
Kconfig files.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z9szt3MpQmQ56TRd@gmail.com
|
|
When the rseq UAPI header is included, 'union rseq' clashes with 'struct
rseq'. It's not the case in the rseq selftests but it does break the KVM
selftests that also include this file.
Rename 'union rseq' to 'union rseq_tls' to fix this.
Fixes: e6644c967d3c ("rseq/selftests: Ensure the rseq ABI TLS is actually 1024 bytes")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20250319202144.1141542-1-mjeanson@efficios.com
|
|
Before tc's recent change to fix rounding errors, several tests which
specified a burst size of "1m" would translate back to being 1048574
bytes (2b less than 1Mb). sprint_size prints this as "1024Kb".
With the tc fix, the burst size is instead correctly reported as
1048576 bytes (precisely 1Mb), which sprint_size prints as "1Mb".
This updates the expected output in the tests' matchPattern values
to accept either the old or the new output.
Signed-off-by: Jonathan Lennox <jonathan.lennox@8x8.com>
Link: https://patch.msgid.link/20250312174804.313107-1-jonathan.lennox@8x8.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make sure the test cleans up after itself. The XDP off statements
at the end of the test may not be reached.
Fixes: 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312131040.660386-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce selftests that trigger AA, ABBA deadlocks, and test the edge
case where the held locks table runs out of entries, since we then
fallback to the timeout as the final line of defense. Also exercise
verifier's AA detection where applicable.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-26-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
KVM selftests changes for 6.15, part 2
- Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
- Fix a few minor bugs related to handling of stats FDs.
- Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
- Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
- Misc cleanups and fixes.
|
|
into HEAD
KVM selftests changes for 6.15, part 1
- Misc cleanups and prep work.
- Annotate _no_printf() with "printf" so that pr_debug() statements are
checked by the compiler for default builds (and pr_info() when QUIET).
- Attempt to whack the last LLC references/misses mole in the Intel PMU
counters test by adding a data load and doing CLFLUSH{OPT} on the data
instead of the code being executed. The theory is that modern Intel CPUs
have learned new code prefetching tricks that bypass the PMU counters.
- Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
|
|
KVM x86 misc changes for 6.15:
- Fix a bug in PIC emulation that caused KVM to emit a spurious KVM_REQ_EVENT.
- Add a helper to consolidate handling of mp_state transitions, and use it to
clear pv_unhalted whenever a vCPU is made RUNNABLE.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
- Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
- Drop "support" for PV Async #PF with proctected guests without SEND_ALWAYS,
as KVM can't get the current CPL.
- Misc cleanups
|
|
The KVM RISC-V allows Zaamo/Zalrsc extensions for Guest/VM so add these
extensions to get-reg-list test.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240619153913.867263-6-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The reuslt:
$ tools/testing/selftests/bpf/test_progs --name=fexit_noreturns
#99/1 fexit_noreturns/noreturns:OK
#99 fexit_noreturns:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20250318114447.75484-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Trigger vEVENTs by feeding an idev ID and validating the returned output
virt_ids whether they equal to the value that was set to the vDEVICE.
Link: https://patch.msgid.link/r/e829532ec0a3927d61161b7674b20e731ecd495b.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When attaching a device to a vIOMMU-based nested domain, vdev_id must be
present. Add a piece of code hard-requesting it, preparing for a vEVENTQ
support in the following patch. Then, update the TEST_F.
A HWPT-based nested domain will return a NULL new_viommu, thus no such a
vDEVICE requirement.
Link: https://patch.msgid.link/r/4051ca8a819e51cb30de6b4fe9e4d94d956afe3d.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add test for Zicbom and its block size into CBO tests, when
Zicbom is present, test that cbo.clean/flush may be issued and works.
As the software can't verify the clean/flush functions, we just judged
that cbo.clean/flush isn't executed illegally.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20250226063206.71216-4-cuiyunhui@bytedance.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"15 hotfixes. 7 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
13 are for MM and the other two are for squashfs and procfs.
All are singletons. Please see the individual changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page_alloc: fix memory accept before watermarks gets initialized
mm: decline to manipulate the refcount on a slab page
memcg: drain obj stock on cpu hotplug teardown
mm/huge_memory: drop beyond-EOF folios with the right number of refs
selftests/mm: run_vmtests.sh: fix half_ufd_size_MB calculation
mm: fix error handling in __filemap_get_folio() with FGP_NOWAIT
mm: memcontrol: fix swap counter leak from offline cgroup
mm/vma: do not register private-anon mappings with khugepaged during mmap
squashfs: fix invalid pointer dereference in squashfs_cache_delete
mm/migrate: fix shmem xarray update during migration
mm/hugetlb: fix surplus pages in dissolve_free_huge_page()
mm/damon/core: initialize damos->walk_completed in damon_new_scheme()
mm/damon: respect core layer filters' allowance decision on ops layer
filemap: move prefaulting out of hot write path
proc: fix UAF in proc_get_inode()
|
|
Error handling doesn't check the correct return value. This patch will
fix it.
Link: https://lkml.kernel.org/r/20250312043840.71799-1-cyan.yang@sifive.com
Fixes: f4b5fd6946e2 ("selftests/vm: anon_cow: THP tests")
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It splits page cache folios to orders from 0 to 8 at different in-folio
offset.
Link: https://lkml.kernel.org/r/20250307174001.242794-9-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add selftests to verify that it is possible to load freplace program
from user namespace if BPF token is initialized by bpf_object__prepare
before calling bpf_program__set_attach_target.
Negative test is added as well.
Modified type of the priv_prog to xdp, as kprobe did not work on aarch64
and s390x.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250317174039.161275-5-mykyta.yatsenko5@gmail.com
|
|
Add a test to the guard region self tests to assert that the
/proc/$pid/pagemap information now made availabile to the user correctly
identifies and reports guard regions.
As a part of this change, update vm_util.h to add the new bit (note there
is no header file in the kernel where this is exposed, the user is
expected to provide their own mask) and utilise the helper functions there
for pagemap functionality.
[lorenzo.stoakes@oracle.com: fixup define name]
Link: https://lkml.kernel.org/r/32e83941-e6f5-42ee-9292-a44c16463cf1@lucifer.local
Link: https://lkml.kernel.org/r/164feb0a43ae72650e6b20c3910213f469566311.1740139449.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It's not really possible to start diagnosing this without knowing the
actual error.
Also update the mlock2 helper to behave like libc would by setting errno
and returning -1.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-12-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If running from a directory that can't be read by unprivileged users,
executing on-fault-test via the nobody user will fail.
The kselftest build does give the file the correct permissions, but after
being installed it might be in a directory without global execute
permissions.
Since the script can't safely fix that, just skip if it happens. Note
that the stderr of the `ls` command is unfiltered meaning the user sees a
"permission denied" error that can help inform them why the test was
skipped.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-11-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This test allocates a page of every available size and doesn't have any
SKIP logic if the allocation fails. So, ensure it's available and skip
the test if we can't do so.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-10-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This script must be run as root anyway (see all the writing to privileged
files in /proc etc).
Remove the unnecessary use of sudo to avoid breaking on single-user
systems that don't have sudo. This also avoids confusing readers.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-9-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some filesystems don't support ftruncate()ing unlinked files. They return
ENOENT. In that case, skip the test.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-8-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It seems that 9pfs does not allow truncating unlinked files, Mark Brown
has noted that NFS may also behave this way.
It doesn't seem quite right to call this a "bug" but it's probably a
special enough case that it makes sense for the test to just SKIP if it
happens.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-7-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This calculation divides a fixed parameter by an environment-dependent
parameter i.e. the number of CPUs.
The simple way to avoid machine-specific failures here is to just put a
cap on the max value of the latter.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-6-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Suggested-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
So this can be debugged more easily.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-5-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A later commit will bound this variable so it no longer necessarily
matches the number of CPUs. Rename it appropriately.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-4-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It's obvious that this should fail in that case, but still, save the
reader the effort of figuring out that they've run into this by just
SKIPping
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-3-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It's pretty obvious that the test wouldn't work if you don't have the
feature enabled. But, it's still useful to SKIP instead of failing so the
reader can immediately tell that this is the reason why.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-2-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: Some cleanups from trying to run them", v4.
I never had much luck running mm selftests so I spent a few hours digging
into why.
Looks like most of the reason is missing SKIP checks, so this series is
just adding a bunch of those that I found. I did not do anything like all
of them, just the ones I spotted in gup_longterm, gup_test, mmap,
userfaultfd and memfd_secret.
It's a bit unfortunate to have to skip those tests when ftruncate() fails,
but I don't have time to dig deep enough into it to actually make them
pass. I have observed the issue on 9pfs and heard rumours that NFS has a
similar problem.
I'm now able to run these test groups successfully:
- mmap
- gup_test
- compaction
- migration
- page_frag
- userfaultfd
- mlock
I've never gone past "Waiting for hugetlb memory to get depleted", in the
hugetlb tests. I don't know if they are stuck or if they would eventually
work if I was patient enough (testing on a 1G machine). I have not
investigated further.
I had some issues with mlock tests failing due to -ENOSRCH from mlock2(),
I can no longer reproduce that though, things work OK now.
Of the remaining tests there may be others that work fine, but there's no
convenient way to survey the whole output of run_vmtests.sh so I'm just
going test by test here.
In my spare moments I am slowly chipping away at a setup to run these
tests continuously in a reasonably hermetic QEMU environment via
virtme-ng:
https://github.com/bjackman/linux/blob/5fad4b9c592290f38e0f8bc73c9abb9c99d8787c/README.md
Hopefully that will eventually offer a way to provide a "canned"
environment where the tests are known to work, which can be fairly easily
reproduced by any developer.
This patch (of 12):
Just reporting failure doesn't tell you what went wrong. This can fail in
different ways so report errno to help the reader get started debugging.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-0-dec210a658f5@google.com
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-1-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix misspelling flagged by codespell.
Link: https://lkml.kernel.org/r/20250215081803.1793-1-ujwal.kundur@gmail.com
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend the guard region self tests to explicitly assert that guard regions
work correctly for functionality specific to file-backed and shmem
mappings.
In addition to testing all of the existing guard region functionality that
is currently tested against anonymous mappings against file-backed and
shmem mappings (except those which are exclusive to anonymous mapping), we
now also:
* Test that MADV_SEQUENTIAL does not cause unexpected readahead behaviour.
* Test that MAP_PRIVATE behaves as expected with guard regions installed in
both a shared and private mapping of an fd.
* Test that a read-only file can correctly establish guard regions.
* Test a probable fault-around case does not interfere with guard regions
(or vice-versa).
* Test that truncation does not eliminate guard regions.
* Test that hole punching functions as expected in the presence of guard
regions.
* Test that a read-only mapping of a memfd write sealed mapping can have
guard regions established within it and function correctly without
violation of the seal.
* Test that guard regions installed into a mapping of the anonymous zero
page function correctly.
Link: https://lkml.kernel.org/r/90c16bec5fcaafcd1700dfa3e9988c3e1aa9ac1d.1739469950.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend the guard region tests to allow for test fixture variants for anon,
shmem, and local file files.
This allows us to assert that each of the expected behaviours of anonymous
memory also applies correctly to file-backed (both shmem and an a file
created locally in the current working directory) and thus asserts the
same correctness guarantees as all the remaining tests do.
The fixture teardown is now performed in the parent process rather than
child forked ones, meaning cleanup is always performed, including
unlinking any generated temporary files.
Additionally the variant fixture data type now contains an enum value
indicating the type of backing store and the mmap() invocation is
abstracted to allow for the mapping of whichever backing store the variant
is testing.
We adjust tests as necessary to account for the fact they may now
reference files rather than anonymous memory.
Link: https://lkml.kernel.org/r/ab42228d2bd9b8aa18e9faebcd5c88732a7e5820.1739469950.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The feature formerly referred to as guard pages is more correctly referred
to as 'guard regions', as in fact no pages are ever allocated in the
process of installing the regions.
To avoid confusion, rename the tests accordingly.
[lorenzo.stoakes@oracle.com: fix guard regions invocation]
Link: https://lkml.kernel.org/r/13426c71-d069-4407-9340-b227ff8b8736@lucifer.local
Link: https://lkml.kernel.org/r/1c3cd04a3f69b5756b94bda701ac88325a9be18b.1739469950.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently the mm selftests refuse to run if huge pages are not available
in the current system but this is an optional feature and not all the
tests actually require them. Change the test during startup to be
non-fatal and skip or omit tests which actually rely on having huge pages,
allowing the other tests to be run.
The gup_test does support using madvise() to configure huge pages but it
ignores the error code so we just let it run.
Link: https://lkml.kernel.org/r/20250212-kselftest-mm-no-hugepages-v1-2-44702f538522@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix misspelling.
Link: https://lkml.kernel.org/r/77e0e915-36c3-4c95-84b8-0b73aaa17951@gmail.com
Signed-off-by: Eric Salem <ericsalem@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The thuge-gen test_mmap() and test_shmget() tests are repeatedly run for a
variety of sizes but always report the result of their test with the same
name, meaning that automated sysetms running the tests are unable to
distinguish between the various tests. Add the supplied sizes to the
logged test names to distinguish between runs.
My test automation was getting pretty confused about what was going on
- the test names are a pretty important external interface.
Link: https://lkml.kernel.org/r/20250204-kselftest-mm-fix-dups-v1-1-6afe417ef4bb@kernel.org
Fixes: b38bd9b2c448 ("selftests/mm: thuge-gen: conform to TAP format output")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now split_huge_page*() supports shmem THP split to any lower order. Test
it.
The test now reads file content out after split to check if the split
corrupts the file data.
Link: https://lkml.kernel.org/r/20250122161928.1240637-3-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit acd7ccb284b8 ("mm: shmem: add large folio support for tmpfs")
changes huge=always to allocate THP/mTHP based on write size and
split_huge_page_test does not write PMD size data, so file-back THP is not
created during the test. Fix it by writing PMD size data.
Link: https://lkml.kernel.org/r/20250122161928.1240637-1-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We noticed that uffd-stress test was always failing to run when invoked
for the hugetlb profiles on x86_64 systems with a processor count of 64 or
bigger:
...
# ------------------------------------
# running ./uffd-stress hugetlb 128 32
# ------------------------------------
# ERROR: invalid MiB (errno=9, @uffd-stress.c:459)
...
# [FAIL]
not ok 3 uffd-stress hugetlb 128 32 # exit=1
...
The problem boils down to how run_vmtests.sh (mis)calculates the size of
the region it feeds to uffd-stress. The latter expects to see an amount
of MiB while the former is just giving out the number of free hugepages
halved down. This measurement discrepancy ends up violating uffd-stress'
assertion on number of hugetlb pages allocated per CPU, causing it to bail
out with the error above.
This commit fixes that issue by adjusting run_vmtests.sh's
half_ufd_size_MB calculation so it properly renders the region size in
MiB, as expected, while maintaining all of its original constraints in
place.
Link: https://lkml.kernel.org/r/20250218192251.53243-1-aquini@redhat.com
Fixes: 2e47a445d7b3 ("selftests/mm: run_vmtests.sh: fix hugetlb mem size calculation")
Signed-off-by: Rafael Aquini <raquini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The SO_RCVLOWAT option is defined as 18 in the selftest header,
which matches the generic definition. However, on powerpc,
SO_RCVLOWAT is defined as 16. This discrepancy causes
sol_socket_sockopt() to fail with the default switch case on powerpc.
This commit fixes by defining SO_RCVLOWAT as 16 for powerpc.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20250311084647.3686544-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8be3 ("selftests/bpf: Add benchmark for bpf_strncmp() helper")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Venkat reported a compilation error for BPF selftests on PowerPC [0].
The crux of the error is the following message:
In file included from progs/arena_spin_lock.c:7:
/root/bpf-next/tools/testing/selftests/bpf/bpf_arena_spin_lock.h:122:8:
error: member reference base type '__attribute__((address_space(1)))
u32' (aka '__attribute__((address_space(1))) unsigned int') is not a
structure or union
122 | old = atomic_read(&lock->val);
This is because PowerPC overrides the qspinlock type changing the
lock->val member's type from atomic_t to u32.
To remedy this, import the asm-generic version in the arena spin lock
header, name it __qspinlock (since it's aliased to arena_spinlock_t, the
actual name hardly matters), and adjust the selftest to not depend on
the type in vmlinux.h.
[0]: https://lore.kernel.org/bpf/7bc80a3b-d708-4735-aa3b-6a8c21720f9d@linux.ibm.com
Fixes: 88d706ba7cc5 ("selftests/bpf: Introduce arena spin lock")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20250311154244.3775505-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This test exercises the kernel flag added to security_bpf by
effectively blocking light-skeletons from loading while allowing
normal skeletons to function as-is. Since this should work with any
arbitrary BPF program, an existing program from LSKELS_EXTRA was
used as a test payload.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250310221737.821889-3-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Certain bpf syscall subcommands are available for usage from both
userspace and the kernel. LSM modules or eBPF gatekeeper programs may
need to take a different course of action depending on whether or not
a BPF syscall originated from the kernel or userspace.
Additionally, some of the bpf_attr struct fields contain pointers to
arbitrary memory. Currently the functionality to determine whether or
not a pointer refers to kernel memory or userspace memory is exposed
to the bpf verifier, but that information is missing from various LSM
hooks.
Here we augment the LSM hooks to provide this data, by simply passing
a boolean flag indicating whether or not the call originated in the
kernel, in any hook that contains a bpf_attr struct that corresponds
to a subcommand that may be called from the kernel.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250310221737.821889-2-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/bpf/20250310032045.651068-1-nichen@iscas.ac.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The Makefile uses the exit code of the `llvm-config --link-static --libs`
command to choose between statically-linked and dynamically-linked LLVMs.
The stdout and stderr of that command are redirected to /dev/null.
To redirect the output the "&>" construction is used, which might not be
supported by /bin/sh, which is executed by make for $(shell ...) commands.
On such systems the test will fail even if static LLVM is actually
supported. Replace "&>" by ">/dev/null 2>&1" to fix this.
Fixes: 2a9d30fac818 ("selftests/bpf: Support dynamically linking LLVM if static is not available")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20250310145112.1261241-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
