| Age | Commit message (Collapse) | Author |
|---|
|
Lots of easy overlapping changes in the confict
resolutions here.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: fix memory hotplug during boot
kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
checkpatch: fix macro argument precedence test
init/main.c: include <linux/mem_encrypt.h>
kernel/sys.c: fix potential Spectre v1 issue
mm/memory_hotplug: fix leftover use of struct page during hotplug
proc: fix smaps and meminfo alignment
mm: do not warn on offline nodes unless the specific node is explicitly requested
mm, memory_hotplug: make has_unmovable_pages more robust
mm/kasan: don't vfree() nonexistent vm_area
MAINTAINERS: change hugetlbfs maintainer and update files
ipc/shm: fix shmat() nil address after round-down when remapping
Revert "ipc/shm: Fix shmat mmap nil-page protection"
idr: fix invalid ptr dereference on item delete
ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"
mm: fix nr_rotate_swap leak in swapon() error case
|
|
Pull networking fixes from David Miller:
"Let's begin the holiday weekend with some networking fixes:
1) Whoops need to restrict cfg80211 wiphy names even more to 64
bytes. From Eric Biggers.
2) Fix flags being ignored when using kernel_connect() with SCTP,
from Xin Long.
3) Use after free in DCCP, from Alexey Kodanev.
4) Need to check rhltable_init() return value in ipmr code, from Eric
Dumazet.
5) XDP handling fixes in virtio_net from Jason Wang.
6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu.
7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack
Morgenstein.
8) Prevent out-of-bounds speculation using indexes in BPF, from
Daniel Borkmann.
9) Fix regression added by AF_PACKET link layer cure, from Willem de
Bruijn.
10) Correct ENIC dma mask, from Govindarajulu Varadarajan.
11) Missing config options for PMTU tests, from Stefano Brivio"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
ibmvnic: Fix partial success login retries
selftests/net: Add missing config options for PMTU tests
mlx4_core: allocate ICM memory in page size chunks
enic: set DMA mask to 47 bit
ppp: remove the PPPIOCDETACH ioctl
ipv4: remove warning in ip_recv_error
net : sched: cls_api: deal with egdev path only if needed
vhost: synchronize IOTLB message with dev cleanup
packet: fix reserve calculation
net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
bpf: properly enforce index mask to prevent out-of-bounds speculation
net/mlx4: Fix irq-unsafe spinlock usage
net: phy: broadcom: Fix bcm_write_exp()
net: phy: broadcom: Fix auxiliary control register reads
net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy
net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message
ibmvnic: Only do H_EOI for mobility events
tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
virtio-net: fix leaking page for gso packet during mergeable XDP
...
|
|
If the radix tree underlying the IDR happens to be full and we attempt
to remove an id which is larger than any id in the IDR, we will call
__radix_tree_delete() with an uninitialised 'slot' pointer, at which
point anything could happen. This was easiest to hit with a single
entry at id 0 and attempting to remove a non-0 id, but it could have
happened with 64 entries and attempting to remove an id >= 64.
Roman said:
The syzcaller test boils down to opening /dev/kvm, creating an
eventfd, and calling a couple of KVM ioctls. None of this requires
superuser. And the result is dereferencing an uninitialized pointer
which is likely a crash. The specific path caught by syzbot is via
KVM_HYPERV_EVENTD ioctl which is new in 4.17. But I guess there are
other user-triggerable paths, so cc:stable is probably justified.
Matthew added:
We have around 250 calls to idr_remove() in the kernel today. Many of
them pass an ID which is embedded in the object they're removing, so
they're safe. Picking a few likely candidates:
drivers/firewire/core-cdev.c looks unsafe; the ID comes from an ioctl.
drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c is similar
drivers/atm/nicstar.c could be taken down by a handcrafted packet
Link: http://lkml.kernel.org/r/20180518175025.GD6361@bombadil.infradead.org
Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree")
Reported-by: <syzbot+35666cba7f0a337e2e79@syzkaller.appspotmail.com>
Debugged-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a bug in the original fix to prevent out of bounds speculation when
multiple tail call maps from different branches or calls end up at the
same tail call helper invocation, from Daniel.
2) Two selftest fixes, one in reuseport_bpf_numa where test is skipped in
case of missing numa support and another one to update kernel config to
properly support xdp_meta.sh test, from Anders.
...
Would be great if you have a chance to merge net into net-next after that.
The verifier fix would be needed later as a dependency in bpf-next for
upcomig work there. When you do the merge there's a trivial conflict on
BPF side with 849fa50662fb ("bpf/verifier: refine retval R0 state for
bpf_get_stack helper"): Resolution is to keep both functions, the
do_refine_retval_range() and record_func_map().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PMTU tests in pmtu.sh need support for VTI, VTI6 and dummy
interfaces: add them to config file.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Test for "tc action mirred egress mirror" that mirrors to GRE when the
underlay route points at an 802.1d bridge and packet egresses through a
VLAN device.
Besides testing basic connectivity, this also tests that the traffic is
properly tagged.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test for "tc action mirred egress mirror" that mirrors to a gretap
netdevice whose underlay route points at a vlan device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test for "tc action mirred egress mirror" that mirrors to GRE when the
underlay route points at a vlan device on top of a bridge device with
vlan filtering (802.1q).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test for "tc action mirred egress mirror" that mirrors to a vlan device.
- test_vlan() tests that the packets get mirrored
- test_tagged_vlan() tests that the mirrored packets have correct inner
VLAN tag.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A mirror-to-vlan test that's coming next needs to install the trap
unconditionally. Therefore extract from slow_path_trap_{,un}install()
a more generic functions trap_install() and trap_uninstall(), and covert
the former two to conditional wrappers around these.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add full_test_span_gre_dir_vlan_ips() and full_test_span_gre_dir_vlan()
to support mirror-to-gre tests that involve VLAN.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add vlan_create() and vlan_destroy() to manage VLAN netdevices.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Having a clsact qdisc on $h3 is useful in several tests, and will be
useful in more tests to come. Move the registration from all the tests
that need it into the topology file itself.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For non-GRE mirroring tests, a functions along the lines of
do_test_span_gre_dir_ips() and test_span_gre_dir_ips() are necessary,
but such that they don't assume tunnels are involved. Extract the code
from mirror_gre_lib.sh to mirror_lib.sh and convert to just use a given
device without assuming it's named "h3-$tundev". Convert the two
above-mentioned functions to wrappers that pass along the correct device
name.
Add test_span_dir() and fail_test_span_dir() to round up the API for use
by following patches.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move generic parts of mirror_gre_topo_lib.sh into a new file
mirror_topo_lib.sh. Reuse the functions in GRE topo, adding the tunnel
devices as necessary.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-05-24
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).
2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.
3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.
4) Jiong Wang adds support for indirect and arithmetic shifts to NFP
5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.
6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.
7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.
8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.
9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test that when flower-based mirror action is removed, mirroring stops.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When underlay route is removed, the mirrored traffic should not be
forwarded.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tests that the mirroring code catches up with deletion of a mirrored-to
device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new command "bpftool perf [show | list]" will traverse
all processes under /proc, and if any fd is associated
with a perf event, it will print out related perf event
information. Documentation is also added.
Below is an example to show the results using bcc commands.
Running the following 4 bcc commands:
kprobe: trace.py '__x64_sys_nanosleep'
kretprobe: trace.py 'r::__x64_sys_nanosleep'
tracepoint: trace.py 't:syscalls:sys_enter_nanosleep'
uprobe: trace.py 'p:/home/yhs/a.out:main'
The bpftool command line and result:
$ bpftool perf
pid 21711 fd 5: prog_id 5 kprobe func __x64_sys_write offset 0
pid 21765 fd 5: prog_id 7 kretprobe func __x64_sys_nanosleep offset 0
pid 21767 fd 5: prog_id 8 tracepoint sys_enter_nanosleep
pid 21800 fd 5: prog_id 9 uprobe filename /home/yhs/a.out offset 1159
$ bpftool -j perf
[{"pid":21711,"fd":5,"prog_id":5,"fd_type":"kprobe","func":"__x64_sys_write","offset":0}, \
{"pid":21765,"fd":5,"prog_id":7,"fd_type":"kretprobe","func":"__x64_sys_nanosleep","offset":0}, \
{"pid":21767,"fd":5,"prog_id":8,"fd_type":"tracepoint","tracepoint":"sys_enter_nanosleep"}, \
{"pid":21800,"fd":5,"prog_id":9,"fd_type":"uprobe","filename":"/home/yhs/a.out","offset":1159}]
$ bpftool prog
5: kprobe name probe___x64_sys tag e495a0c82f2c7a8d gpl
loaded_at 2018-05-15T04:46:37-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 4
7: kprobe name probe___x64_sys tag f2fdee479a503abf gpl
loaded_at 2018-05-15T04:48:32-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 7
8: tracepoint name tracepoint__sys tag 5390badef2395fcf gpl
loaded_at 2018-05-15T04:48:48-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 8
9: kprobe name probe_main_1 tag 0a87bdc2e2953b6d gpl
loaded_at 2018-05-15T04:49:52-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 9
$ ps ax | grep "python ./trace.py"
21711 pts/0 T 0:03 python ./trace.py __x64_sys_write
21765 pts/0 S+ 0:00 python ./trace.py r::__x64_sys_nanosleep
21767 pts/2 S+ 0:00 python ./trace.py t:syscalls:sys_enter_nanosleep
21800 pts/3 S+ 0:00 python ./trace.py p:/home/yhs/a.out:main
22374 pts/1 S+ 0:00 grep --color=auto python ./trace.py
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The new tests are added to query perf_event information
for raw_tracepoint and tracepoint attachment. For tracepoint,
both syscalls and non-syscalls tracepoints are queries as
they are treated slightly differently inside the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Given a kernel function name, ksym_get_addr() will return the kernel
address for this function, or 0 if it cannot find this function name
in /proc/kallsyms. This function will be used later when a kernel
address is used to initiate a kprobe perf event.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Sync kernel header bpf.h to tools/include/uapi/linux/bpf.h and
implement bpf_task_fd_query() in libbpf. The test programs
in samples/bpf and tools/testing/selftests/bpf, and later bpftool
will use this libbpf function to query kernel.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This test the ptrace hw breakpoints via PTRACE_SET_DEBUGREG and
PPC_PTRACE_SETHWDEBUG. This test was use to find the bugs fixed by
these recent commits:
4f7c06e26e powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG
cd6ef7eebf powerpc/ptrace: Fix enforcement of DAWR constraints
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Add SPDX tag, clang format it]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add a new test for the seg6local End.BPF action. The following helpers
are also tested:
- bpf_lwt_push_encap within the LWT BPF IN hook
- bpf_lwt_seg6_action
- bpf_lwt_seg6_adjust_srh
- bpf_lwt_seg6_store_bytes
A chain of End.BPF actions is built. The SRH is injected through a LWT
BPF IN hook before entering this chain. Each End.BPF action validates
the previous one, otherwise the packet is dropped. The test succeeds
if the last node in the chain receives the packet and the UDP datagram
contained can be retrieved from userspace.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.
Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.
Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.
This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.
The BPF program may return 3 types of return codes:
- BPF_OK: the End.BPF action will look up the next destination through
seg6_lookup_nexthop.
- BPF_REDIRECT: if an action has been executed through the
bpf_lwt_seg6_action helper, the BPF program should return this
value, as the skb's destination is already set and the default
lookup should not be performed.
- BPF_DROP : the packet will be dropped.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This splits up the contiguous JITed dump obtained via the bpf
system call into more relatable chunks for each function in
the program. If the kernel symbols corresponding to these are
known, they are printed in the header for each JIT image dump
otherwise the masked start address is printed.
Before applying this patch:
# bpftool prog dump jited id 1
0: push %rbp
1: mov %rsp,%rbp
...
70: leaveq
71: retq
72: push %rbp
73: mov %rsp,%rbp
...
dd: leaveq
de: retq
# bpftool -p prog dump jited id 1
[{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x71",
"operation": "retq",
"operands": [null
]
},{
"pc": "0x72",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0xde",
"operation": "retq",
"operands": [null
]
}
]
After applying this patch:
# echo 0 > /proc/sys/net/core/bpf_jit_kallsyms
# bpftool prog dump jited id 1
0xffffffffc02c7000:
0: push %rbp
1: mov %rsp,%rbp
...
70: leaveq
71: retq
0xffffffffc02cf000:
0: push %rbp
1: mov %rsp,%rbp
...
6b: leaveq
6c: retq
# bpftool -p prog dump jited id 1
[{
"name": "0xffffffffc02c7000",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x71",
"operation": "retq",
"operands": [null
]
}
]
},{
"name": "0xffffffffc02cf000",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x6c",
"operation": "retq",
"operands": [null
]
}
]
}
]
# echo 1 > /proc/sys/net/core/bpf_jit_kallsyms
# bpftool prog dump jited id 1
bpf_prog_b811aab41a39ad3d_foo:
0: push %rbp
1: mov %rsp,%rbp
...
70: leaveq
71: retq
bpf_prog_cf418ac8b67bebd9_F:
0: push %rbp
1: mov %rsp,%rbp
...
6b: leaveq
6c: retq
# bpftool -p prog dump jited id 1
[{
"name": "bpf_prog_b811aab41a39ad3d_foo",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x71",
"operation": "retq",
"operands": [null
]
}
]
},{
"name": "bpf_prog_cf418ac8b67bebd9_F",
"insns": [{
"pc": "0x0",
"operation": "push",
"operands": ["%rbp"
]
},{
...
},{
"pc": "0x6c",
"operation": "retq",
"operands": [null
]
}
]
}
]
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Syncing the bpf.h uapi header with tools so that struct
bpf_prog_info has the two new fields for passing on the
JITed image lengths of each function in a multi-function
program.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, we resolve the callee's address for a JITed function
call by using the imm field of the call instruction as an offset
from __bpf_call_base. If bpf_jit_kallsyms is enabled, we further
use this address to get the callee's kernel symbol's name.
For some architectures, such as powerpc64, the imm field is not
large enough to hold this offset. So, instead of assigning this
offset to the imm field, the verifier now assigns the subprog
id. Also, a list of kernel symbol addresses for all the JITed
functions is provided in the program info. We now use the imm
field as an index for this list to lookup a callee's symbol's
address and resolve its name.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Syncing the bpf.h uapi header with tools so that struct
bpf_prog_info has the two new fields for passing on the
addresses of the kernel symbols corresponding to each
function in a program.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Recent discussions around uevent filtering (cf. net-next commit [1], [2],
and [3] and discussions in [4], [5], and [6]) have shown that the semantics
around uevent filtering where not well understood.
Now that we have settled - at least for the moment - how uevent filtering
should look like let's add some selftests to ensure we don't regress
anything in the future.
Note, the semantics of uevent filtering are described in detail in my
commit message to [2] so I won't repeat them here.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=90d52d4fd82007005125d9a8d2d560a1ca059b9d
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=a3498436b3a0f8ec289e6847e1de40b4123e1639
[3]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=26045a7b14bc7a5455e411d820110f66557d6589
[4]: https://lkml.org/lkml/2018/4/4/739
[5]: https://lkml.org/lkml/2018/4/26/767
[6]: https://lkml.org/lkml/2018/4/26/738
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds a first set of tests for fib rule match/action for
ipv4 and ipv6. Initial tests only cover action lookup table.
can be extended to cover other actions in the future.
Uses ip route get to validate the rule lookup.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On arm32, 'cd tools/testing/selftests/bpf && make' fails with:
libbpf.c:80:10: error: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int64_t {aka long long int}’ [-Werror=format=]
(func)("libbpf: " fmt, ##__VA_ARGS__); \
^
libbpf.c:83:30: note: in expansion of macro ‘__pr’
#define pr_warning(fmt, ...) __pr(__pr_warning, fmt, ##__VA_ARGS__)
^~~~
libbpf.c:1072:3: note: in expansion of macro ‘pr_warning’
pr_warning("map:%s value_type:%s has BTF type_size:%ld != value_size:%u\n",
To fix, typecast 'key_size' and amend format string.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
x86 PTI entry trampolines all map to the same physical page. If that is
reflected in the program headers of /proc/kcore, then do the same for the
copy of kcore.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-18-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Identify and copy any sections for x86 PTI entry trampolines.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation to add more program headers, get rid of kernel_map and
modules_map by moving ->kernel_map and ->modules_map to newly allocated
entries in the ->phdrs list.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation to add more program headers, iterate phdrs instead of
assuming there is only one for the kernel text and one for the modules.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation to add more program headers, layout the relative offset
of each section.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation to add more program headers, calculate offset from the
number of phdrs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation to add more program headers, keep a count of phdrs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, kcore_copy makes 2 program headers, one for the kernel text
(namely kernel_map) and one for the modules (namely modules_map). Now
more program headers are needed, but treating each program header as a
special case results in much more code.
Instead, in preparation to add more program headers, change to keep
program header data (phdr_data) in a list.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we enable the group, for tui/stdio2, the output first line includes
the group event string. While for stdio, it will show only one event.
For example,
perf record -e cycles,branches ./div
perf annotate --group --stdio
Percent | Source code & Disassembly of div for cycles (44407 samples)
......
The first line doesn't include the event 'branches'.
With this patch, it will show the correct group even string.
perf annotate --group --stdio
Percent | Source code & Disassembly of div for cycles, branches (44407 samples)
......
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1526989115-14435-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Like the kernel text, the location of x86 PTI entry trampolines must be
recorded in the perf.data file. Like the kernel, synthesize a mmap event
for that, and add processing for it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Create maps for x86 PTI entry trampolines, based on symbols found in
kallsyms. It is also necessary to keep track of whether the trampolines
have been mapped particularly when the kernel dso is kcore.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-9-git-send-email-adrian.hunter@intel.com
[ Fix extra_kernel_map_info.cnt designed struct initializer on gcc 4.4.7 (centos:6, etc) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Selftests fail to build on several distros/architectures because of
missing headers files.
On a Ubuntu/x86_64 some missing headers are:
asm/byteorder.h, asm/socket.h, asm/sockios.h
On a Debian/arm32 build already fails at sys/cdefs.h
In both cases, these already exist in /usr/include/<arch-specific-dir>,
but Clang does not include these when using '-target bpf' flag,
since it is no longer compiling against the host architecture.
The solution is to:
- run Clang without '-target bpf' and extract the include chain for the
current system
- add these to the bpf build with '-idirafter'
The choice of -idirafter is to catch this error without injecting
unexpected include behavior: if an arch-specific tree is built
for bpf in the future, this will be correctly found by Clang.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The reuseport_bpf_numa test case fails there's no numa support. The
test shouldn't fail if there's no support it should be skipped.
Fixes: 3c2c3c16aaf6 ("reuseport, bpf: add test case for bpf_get_numa_node_id")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
