| Age | Commit message (Collapse) | Author |
|---|
|
When compiler emits endbr insn the function address could
be different than what bpf_get_func_ip() reports.
This is a short term workaround.
bpf_get_func_ip() will be fixed later.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test creates a separate VRF for the VLAN upper, but does not destroy
it during cleanup, resulting in "RTNETLINK answers: File exists" errors.
Fix by using the same VRF for the port and its VLAN upper. This is OK
since their IP addresses do not overlap.
Before:
# ./bridge_locked_port.sh
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
# ./bridge_locked_port.sh
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
After:
# ./bridge_locked_port.sh
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
# ./bridge_locked_port.sh
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
Fixes: b2b681a41251 ("selftests: forwarding: tests of locked port feature")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Disable learning before bringing the bridge port up in order to avoid
the FDB being populated and the test failing.
Before:
# ./bridge_locked_port.sh
RTNETLINK answers: File exists
TEST: Locked port ipv4 [FAIL]
Ping worked after locking port, but before adding FDB entry
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
After:
# ./bridge_locked_port.sh
TEST: Locked port ipv4 [ OK ]
TEST: Locked port ipv6 [ OK ]
TEST: Locked port vlan [ OK ]
Fixes: b2b681a41251 ("selftests: forwarding: tests of locked port feature")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"Execve and binfmt updates.
Eric and I have stepped up to be the active maintainers of this area,
so here's our first collection. The bulk of the work was in coredump
handling fixes; additional details are noted below:
- Handle unusual AT_PHDR offsets (Akira Kawata)
- Fix initial mapping size when PT_LOADs are not ordered (Alexey
Dobriyan)
- Move more code under CONFIG_COREDUMP (Alexey Dobriyan)
- Fix missing mmap_lock in file_files_note (Eric W. Biederman)
- Remove a.out support for alpha and m68k (Eric W. Biederman)
- Include first pages of non-exec ELF libraries in coredump (Jann
Horn)
- Don't write past end of notes for regset gap in coredump (Rick
Edgecombe)
- Comment clean-ups (Tom Rix)
- Force single empty string when argv is empty (Kees Cook)
- Add NULL argv selftest (Kees Cook)
- Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook)
- MAINTAINERS: Update execve entry with tree (Kees Cook)
- Introduce initial KUnit testing for binfmt_elf (Kees Cook)"
* tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Don't write past end of notes for regset gap
a.out: Stop building a.out/osf1 support on alpha and m68k
coredump: Don't compile flat_core_dump when coredumps are disabled
coredump: Use the vma snapshot in fill_files_note
coredump/elf: Pass coredump_params into fill_note_info
coredump: Remove the WARN_ON in dump_vma_snapshot
coredump: Snapshot the vmas in do_coredump
coredump: Move definition of struct coredump_params into coredump.h
binfmt_elf: Introduce KUnit test
ELF: Properly redefine PT_GNU_* in terms of PT_LOOS
MAINTAINERS: Update execve entry with more details
exec: cleanup comments
fs/binfmt_elf: Refactor load_elf_binary function
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
binfmt: move more stuff undef CONFIG_COREDUMP
selftests/exec: Test for empty string on NULL argv
exec: Force single empty string when argv is empty
coredump: Also dump first pages of non-executable ELF libraries
ELF: fix overflow in total mapping size calculation
|
|
`cur64`, `start64` and `ts_delta` are int64_t. Change format
specifiers in fprintf from `"%lu"` to `"%" PRId64` to adapt
to 32-bit and 64-bit systems.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220319073730.5235-1-guozhengkui@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Compiled with clang by adding LLVM=1 both kernel and selftests/bpf
build, I hit the following compilation error:
In file included from /.../tools/testing/selftests/bpf/prog_tests/subskeleton.c:6:
./test_subskeleton_lib.subskel.h:168:6: error: variable 'err' is used uninitialized whenever
'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!s->progs)
^~~~~~~~~
./test_subskeleton_lib.subskel.h:181:11: note: uninitialized use occurs here
errno = -err;
^~~
./test_subskeleton_lib.subskel.h:168:2: note: remove the 'if' if its condition is always false
if (!s->progs)
^~~~~~~~~~~~~~
The compilation error is triggered by the following code
...
int err;
obj = (struct test_subskeleton_lib *)calloc(1, sizeof(*obj));
if (!obj) {
errno = ENOMEM;
goto err;
}
...
err:
test_subskeleton_lib__destroy(obj);
errno = -err;
...
in test_subskeleton_lib__open(). The 'err' is not initialized, yet it
is used in 'errno = -err' later.
The fix is to remove 'errno = -err' since errno has been set properly
in all incoming branches.
Fixes: 00389c58ffe9 ("bpftool: Add support for subskeletons")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220320032009.3106133-1-yhs@fb.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"As far as new functionality is concerned, there is a new thermal
driver for the Intel Hardware Feedback Interface (HFI) along with some
intel-speed-select utility changes to support it. There are also new
DT compatible strings for a couple of platforms, and thermal zones on
some platforms will be registered as HWmon sensors now.
Apart from the above, some drivers are updated (fixes mostly) and
there is a new piece of documentation for the Intel DPTF (Dynamic
Power and Thermal Framework) sysfs interface.
Specifics:
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user space
via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform and
fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's Tsens
driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT binding
(Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt is
optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
interface documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy
Dunlap)"
* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
Documentation: thermal: DPTF Documentation
MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
thermal/drivers/brcmstb_thermal: Interrupt is optional
thermal: tegra-bpmp: Handle errors in BPMP response
drivers/thermal/ti-soc-thermal: Add hwmon support
dt-bindings: thermal: tsens: Add msm8953 compatible
dt-bindings: thermal: Add sm8150 compatible string for LMh
thermal/drivers/qcom/lmh: Add support for sm8150
thermal/drivers/tsens: register thermal zones as hwmon sensors
MAINTAINERS: thermal: samsung: Drop obsolete properties
dt-bindings: thermal: samsung: Convert to dtschema
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: Replace acpi_bus_get_device()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull memory model doc update from Paul McKenney:
"An improved explanation of syntactic and semantic dependencies from
Alan Stern"
* tag 'lkmm.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model: Explain syntactic and semantic dependencies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Fix idle detection (Neeraj Upadhyay) and missing access marking
detected by KCSAN.
- Reduce coupling between rcu_barrier() and CPU-hotplug operations, so
that rcu_barrier() no longer needs to do cpus_read_lock(). This may
also someday allow system boot to bring CPUs online concurrently.
- Enable more aggressive movement to per-CPU queueing when reacting to
excessive lock contention due to workloads placing heavy update-side
stress on RCU tasks.
- Improvements to RCU priority boosting, including changes from Neeraj
Upadhyay, Zqiang, and Alison Chaiken.
- Various fixes improving test robustness and debug information.
- Add tests for SRCU size transitions, further compress torture.sh
build products, and improve debug output.
- Miscellaneous fixes.
* tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
rcu: Replace cpumask_weight with cpumask_empty where appropriate
rcu: Remove __read_mostly annotations from rcu_scheduler_active externs
rcu: Uninline multi-use function: finish_rcuwait()
rcu: Mark writes to the rcu_segcblist structure's ->flags field
kasan: Record work creation stack trace with interrupts enabled
rcu: Inline __call_rcu() into call_rcu()
rcu: Add mutex for rcu boost kthread spawning and affinity setting
rcu: Fix description of kvfree_rcu()
MAINTAINERS: Add Frederic and Neeraj to their RCU files
rcutorture: Provide non-power-of-two Tasks RCU scenarios
rcutorture: Test SRCU size transitions
torture: Make torture.sh help message match reality
rcu-tasks: Set ->percpu_enqueue_shift to zero upon contention
rcu-tasks: Use order_base_2() instead of ilog2()
rcu: Create and use an rcu_rdp_cpu_online()
rcu: Make rcu_barrier() no longer block CPU-hotplug operations
rcu: Rework rcu_barrier() and callback-migration logic
rcu: Refactor rcu_barrier() empty-list handling
rcu: Kill rnp->ofl_seq and use only rcu_state.ofl_lock for exclusion
torture: Change KVM environment variable to RCUTORTURE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID support from Thomas Gleixner:
"Reenable ENQCMD/PASID support:
- Simplify the PASID handling to allocate the PASID once, associate
it to the mm of a process and free it on mm_exit().
The previous attempt of refcounted PASIDs and dynamic
alloc()/free() turned out to be error prone and too complex. The
PASID space is 20bits, so the case of resource exhaustion is a pure
academic concern.
- Populate the PASID MSR on demand via #GP to avoid racy updates via
IPIs.
- Reenable ENQCMD and let objtool check for the forbidden usage of
ENQCMD in the kernel.
- Update the documentation for Shared Virtual Addressing accordingly"
* tag 'x86-pasid-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Update documentation for SVA (Shared Virtual Addressing)
tools/objtool: Check for use of the ENQCMD instruction in the kernel
x86/cpufeatures: Re-enable ENQCMD
x86/traps: Demand-populate PASID MSR via #GP
sched: Define and initialize a flag to identify valid PASID in the task
x86/fpu: Clear PASID when copying fpstate
iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit
kernel/fork: Initialize mm's PASID
iommu/ioasid: Introduce a helper to check for valid PASIDs
mm: Change CONFIG option for mm->pasid field
iommu/sva: Rename CONFIG_IOMMU_SVA_LIB to CONFIG_IOMMU_SVA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Borislav Petkov:
- A couple of fixes and improvements to the SGX selftests
* tag 'x86_sgx_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/sgx: Treat CC as one argument
selftests/x86: Add validity check and allow field splitting
selftests/sgx: Remove extra newlines in test output
selftests/sgx: Ensure enclave data available during debug print
selftests/sgx: Do not attempt enclave build without valid enclave
selftests/sgx: Fix NULL-pointer-dereference upon early test failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Add support for a couple new insn sets to the insn decoder:
AVX512-FP16, AMX, other misc insns.
- Update VMware-specific MAINTAINERS entries
* tag 'x86_misc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Mark VMware mailing list entries as email aliases
MAINTAINERS: Add Zack as maintainer of vmmouse driver
MAINTAINERS: Update maintainers for paravirt ops and VMware hypervisor interface
x86/insn: Add AVX512-FP16 instructions to the x86 instruction decoder
perf/tests: Add AVX512-FP16 instructions to x86 instruction decoder test
x86/insn: Add misc instructions to x86 instruction decoder
perf/tests: Add misc instructions to the x86 instruction decoder test
x86/insn: Add AMX instructions to the x86 instruction decoder
perf/tests: Add AMX instructions to x86 instruction decoder test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"In order to split the work a bit we've aligned with David Howells more
or less that I take more hardware/firmware aligned keyring patches,
and he takes care more of the framework aligned patches.
For TPM the patches worth of highlighting are the fixes for
refcounting provided by Lino Sanfilippo and James Bottomley.
Eric B. has done a bunch obvious (but important) fixes but there's one
a bit controversial: removal of asym_tpm. It was added in 2018 when
TPM1 was already declared as insecure and world had moved on to TPM2.
I don't know how this has passed all the filters but I did not have a
chance to see the patches when they were out. I simply cannot commit
to maintaining this because it was from all angles just wrong to take
it in the first place to the mainline kernel. Nobody should use this
module really for anything.
Finally, there is a new keyring '.machine' to hold MOK keys ('Machine
Owner Keys'). In the mok side MokListTrustedRT UEFI variable can be
set, from which kernel knows that MOK keys are kernel trusted keys and
they are populated to the machine keyring. This keyring linked to the
secondary trusted keyring, which means that can be used like any
kernel trusted keys. This keyring of course can be used to hold other
MOK'ish keys in other platforms in future"
* tag 'tpmdd-next-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (24 commits)
tpm: use try_get_ops() in tpm-space.c
KEYS: asymmetric: properly validate hash_algo and encoding
KEYS: asymmetric: enforce that sig algo matches key algo
KEYS: remove support for asym_tpm keys
tpm: fix reference counting for struct tpm_chip
integrity: Only use machine keyring when uefi_check_trust_mok_keys is true
integrity: Trust MOK keys if MokListTrustedRT found
efi/mokvar: move up init order
KEYS: Introduce link restriction for machine keys
KEYS: store reference to machine keyring
integrity: add new keyring handler for mok keys
integrity: Introduce a Linux keyring called machine
integrity: Fix warning about missing prototypes
KEYS: trusted: Avoid calling null function trusted_key_exit
KEYS: trusted: Fix trusted key backends when building as module
tpm: xen-tpmfront: Use struct_size() helper
KEYS: x509: remove dead code that set ->unsupported_sig
KEYS: x509: remove never-set ->unsupported_key flag
KEYS: x509: remove unused fields
KEYS: x509: clearly distinguish between key and signature algorithms
...
|
|
Add a -f <filename> option to test PMD folios on files
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
pin_fd is dup-ed and assigned in bpf_map__reuse_fd. Close it
in bpf_object__reuse_map after reuse.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220319030533.3132250-1-hengqi.chen@gmail.com
|
|
If there is no btf_id or frozen, it will not show the pids, but the pids don't
depend on any one of them.
Below is the result after this change:
$ ./bpftool map show
2: lpm_trie flags 0x1
key 8B value 8B max_entries 1 memlock 4096B
pids systemd(1)
3: lpm_trie flags 0x1
key 20B value 8B max_entries 1 memlock 4096B
pids systemd(1)
While before this change, the 'pids systemd(1)' can't be displayed.
Fixes: 9330986c0300 ("bpf: Add bloom filter map implementation")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220320060815.7716-1-laoar.shao@gmail.com
|
|
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
Fixes: 6bdd533cee9a ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321024149.157861-1-liuhangbin@gmail.com
|
|
Add a test case for stacktrace with skip > 0 using a small sized
buffer. It didn't support skipping entries greater than or equal to
the size of buffer and filled the skipped part with 0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220314182042.71025-2-namhyung@kernel.org
|
|
The context access converter rewrites the 4-byte load from
bpf_sk_lookup->remote_port to a 2-byte load from bpf_sk_lookup_kern
structure.
It means that we cannot treat the destination register contents as a 32-bit
value, or the code will not be portable across big- and little-endian
architectures.
This is exactly the same case as with 4-byte loads from bpf_sock->dst_port
so follow the approach outlined in [1] and treat the register contents as a
16-bit value in the test.
[1]: https://lore.kernel.org/bpf/20220317113920.1068535-5-jakub@cloudflare.com/
Fixes: 2ed0dc5937d3 ("selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220319183356.233666-4-jakub@cloudflare.com
|
|
In commit 9a69e2b385f4 ("bpf: Make remote_port field in struct
bpf_sk_lookup 16-bit wide") ->remote_port field changed from __u32 to
__be16.
However, narrow load tests which exercise 1-byte sized loads from
offsetof(struct bpf_sk_lookup, remote_port) were not adopted to reflect the
change.
As a result, on little-endian we continue testing loads from addresses:
- (__u8 *)&ctx->remote_port + 3
- (__u8 *)&ctx->remote_port + 4
which map to the zero padding following the remote_port field, and don't
break the tests because there is no observable change.
While on big-endian, we observe breakage because tests expect to see zeros
for values loaded from:
- (__u8 *)&ctx->remote_port - 1
- (__u8 *)&ctx->remote_port - 2
Above addresses map to ->remote_ip6 field, which precedes ->remote_port,
and are populated during the bpf_sk_lookup IPv6 tests.
Unsurprisingly, on s390x we observe:
#136/38 sk_lookup/narrow access to ctx v4:OK
#136/39 sk_lookup/narrow access to ctx v6:FAIL
Fix it by removing the checks for 1-byte loads from offsets outside of the
->remote_port field.
Fixes: 9a69e2b385f4 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide")
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220319183356.233666-3-jakub@cloudflare.com
|
|
This patch adds a few calls to the existing local storage selftest to
test that we can associate multiple elements with the local storage.
The sleepable program's call to bpf_sk_storage_get with sk_storage_map2
will lead to an allocation of a new selem under the GFP_KERNEL flag.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220318045553.3091807-3-joannekoong@fb.com
|
|
If BPF object doesn't have an BTF info, don't attempt to search for BTF
types describing BPF map key or value layout.
Fixes: 262cfb74ffda ("libbpf: Init btf_{key,value}_type_id on internal map open")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220320001911.3640917-1-andrii@kernel.org
|
|
An issue with icelakex metrics:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json?h=perf/core&id=65eab2bc7dab326ee892ec5a4c749470b368b51a#n48
That causes the slots not to be first.
Fixes: 94dbfd6781a0e87b ("perf parse-events: Architecture specific leader override")
Reported-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220317224309.543736-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As seen with 'perf stat --null ..' and reported in:
https://lore.kernel.org/lkml/YjCLcpcX2peeQVCH@kernel.org/
v2. Avoids setting evsel in the empty list case as suggested by Jiri Olsa.
Committer testing:
Before:
$ perf stat --null sleep 1
Segmentation fault (core dumped)
$
After:
$ perf stat --null sleep 1
Performance counter stats for 'sleep 1':
1.010340646 seconds time elapsed
0.001420000 seconds user
0.000000000 seconds sys
$
Fixes: 472832d2c000b961 ("perf evlist: Refactor evlist__for_each_cpu()")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220317231643.550902-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before this patch, the symbol end address fixup to be called, needed two
conditions being met:
if (prev->end == prev->start && prev->end != curr->start)
Where
"prev->end == prev->start" means that prev is zero-long
(and thus needs a fixup)
and
"prev->end != curr->start" means that fixup hasn't been applied yet
However, this logic is incorrect in the following situation:
*curr = {rb_node = {__rb_parent_color = 278218928,
rb_right = 0x0, rb_left = 0x0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 40, type = 2 '\002',
binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}
*prev = {rb_node = {__rb_parent_color = 278219041,
rb_right = 0x109548b0, rb_left = 0x109547c0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 12, type = 2 '\002',
binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1095486e "optinsn_slot"}
In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.
After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.
Fixes: 3b01a413c196c910 ("perf symbols: Improve kallsyms symbol end addr calculation")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add two tests to pmtu.sh, for verifying that PMTU exceptions get
properly created for routes that don't belong to the main table.
A fib-rule based on the packet's DSCP field is used to jump to the
correct table. ECN shouldn't interfere with this process, so each test
has two components: one that only sets DSCP and one that sets both DSCP
and ECN.
One of the test triggers PMTU exceptions using ICMP Echo Requests, the
other using UDP packets (to test different handlers in the kernel).
A few adjustments are necessary in the rest of the script to allow
policy routing scenarios:
* Add global variable rt_table that allows setup_routing_*() to
add routes to a specific routing table. By default rt_table is set
to "main", so existing tests don't need to be modified.
* Another global variable, policy_mark, is used to define which
dsfield value is used for policy routing. This variable has no
effect on tests that don't use policy routing.
* The UDP version of the test uses socat. So cleanup() now also need
to kill socat PIDs.
* route_get_dst_pmtu_from_exception() and route_get_dst_exception()
now take an optional third argument specifying the dsfield. If
not specified, 0 is used, so existing users don't need to be
modified.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge Intel Hardware Feedback Interface (HFI) thermal driver for
5.18-rc1 and update the intel-speed-select utility to support that
driver.
* thermal-hfi:
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: intel: hfi: Notify user space for HFI events
thermal: netlink: Add a new event to notify CPU capabilities change
thermal: intel: hfi: Enable notification interrupt
thermal: intel: hfi: Handle CPU hotplug events
thermal: intel: hfi: Minimally initialize the Hardware Feedback Interface
x86/cpu: Add definitions for the Intel Hardware Feedback Interface
x86/Documentation: Describe the Intel Hardware Feedback Interface
|
|
Merge power management utilities changes for 5.18-rc1:
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
* pm-tools:
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
turbostat: fix PC6 displaying on some systems
cpupower: Add "perf" option to print AMD P-State information
cpupower: Add function to print AMD P-State performance capabilities
cpupower: Move print_speed function into misc helper
cpupower: Enable boost state support for AMD P-State module
cpupower: Add AMD P-State sysfs definition and access helper
cpupower: Introduce ACPI CPPC library
cpupower: Add the function to get the sysfs value from specific table
cpupower: Initial AMD P-State capability
cpupower: Add the function to check AMD P-State enabled
cpupower: Add AMD P-State capability flag
tools/power/cpupower/{ToDo => TODO}: Rename the todo file
tools: cpupower: fix typo in cpupower-idle-set(1) manpage
|
|
BPF_TRACE_KPROBE_MULTI is a new attach type name, add it to bpftool's
table. This fixes a currently failing CI bpftool check.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220318150106.2933343-1-andrii@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.18
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
|
|
Add test where sender sends two message, each with own
data pattern. Reader tries to read first to broken buffer:
it has three pages size, but middle page is unmapped. Then,
reader tries to read second message to valid buffer. Test
checks, that uncopied part of first message was dropped
and thus not copied as part of second message.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test for receive timeout check: connection is established,
receiver sets timeout, but sender does nothing. Receiver's
'read()' call must return EAGAIN.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The check for 4-byte load from dst_port offset into bpf_sock is failing on
big-endian architecture - s390. The bpf access converter rewrites the
4-byte load to a 2-byte load from sock_common at skc_dport offset, as shown
below.
* s390 / llvm-objdump -S --no-show-raw-insn
00000000000002a0 <sk_dst_port__load_word>:
84: r1 = *(u32 *)(r1 + 48)
85: w0 = 1
86: if w1 == 51966 goto +1 <LBB5_2>
87: w0 = 0
00000000000002c0 <LBB5_2>:
88: exit
* s390 / bpftool prog dump xlated
_Bool sk_dst_port__load_word(struct bpf_sock * sk):
35: (69) r1 = *(u16 *)(r1 +12)
36: (bc) w1 = w1
37: (b4) w0 = 1
38: (16) if w1 == 0xcafe goto pc+1
39: (b4) w0 = 0
40: (95) exit
* x86_64 / llvm-objdump -S --no-show-raw-insn
00000000000002a0 <sk_dst_port__load_word>:
84: r1 = *(u32 *)(r1 + 48)
85: w0 = 1
86: if w1 == 65226 goto +1 <LBB5_2>
87: w0 = 0
00000000000002c0 <LBB5_2>:
88: exit
* x86_64 / bpftool prog dump xlated
_Bool sk_dst_port__load_word(struct bpf_sock * sk):
33: (69) r1 = *(u16 *)(r1 +12)
34: (b4) w0 = 1
35: (16) if w1 == 0xfeca goto pc+1
36: (b4) w0 = 0
37: (95) exit
This leads to surprises if we treat the destination register contents as a
32-bit value, ignoring the fact that in reality it contains a 16-bit value.
On little-endian the register contents reflect the bpf_sock struct
definition, where the lower 16-bits contain the port number:
struct bpf_sock {
...
__be16 dst_port; /* offset 48 */
__u16 :16;
...
};
However, on big-endian the register contents suggest that field the layout
of bpf_sock struct is as so:
struct bpf_sock {
...
__u16 :16; /* offset 48 */
__be16 dst_port;
...
};
Account for this quirky access conversion in the test case exercising the
4-byte load by treating the result as 16-bit wide.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-5-jakub@cloudflare.com
|
|
Replace magic numbers in BPF code with constants from bpf.h, so that they
don't require an explanation in the comments.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-4-jakub@cloudflare.com
|
|
cgroup_skb/egress programs which sock_fields test installs process packets
flying in both directions, from the client to the server, and in reverse
direction.
Recently added dst_port check relies on the fact that destination
port (remote peer port) of the socket which sends the packet is known ahead
of time. This holds true only for the client socket, which connects to the
known server port.
Filter out any traffic that is not egressing from the client socket in the
BPF program that tests reading the dst_port.
Fixes: 8f50f16ff39d ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-3-jakub@cloudflare.com
|
|
The helper macro that records an error in BPF programs that exercise sock
fields access has been inadvertently broken by adaptation work that
happened in commit b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to
use skel and global variables").
BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation
always fails with -EEXIST, which in turn means the error never gets
recorded, and the checks for errors always pass.
Revert the change in update flags.
Fixes: b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to use skel and global variables")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-2-jakub@cloudflare.com
|
|
The commit 314001f0bf92 ("af_unix: Add OOB support") introduced OOB for
AF_UNIX, but it lacks some changes for POLLPRI. Let's add the missing
piece.
In the selftest, normal datagrams are sent followed by OOB data, so this
commit replaces `POLLIN | POLLPRI` with just `POLLPRI` in the first test
case.
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changes the selftests/bpf Makefile to also generate
a subskel.h for every skel.h it would have normally generated.
Separately, it also introduces a new subskeleton test which tests
library objects, externs, weak symbols, kconfigs, and user maps.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1bd24956940bbbfe169bb34f7f87b11df52ef011.1647473511.git.delyank@fb.com
|
|
Subskeletons are headers which require an already loaded program to
operate.
For example, when a BPF library is linked into a larger BPF object file,
the library userspace needs a way to access its own global variables
without requiring knowledge about the larger program at build time.
As a result, subskeletons require a loaded bpf_object to open().
Further, they find their own symbols in the larger program by
walking BTF type data at run time.
At this time, programs, maps, and globals are supported through
non-owning pointers.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ca8a48b4841c72d285ecce82371bef4a899756cb.1647473511.git.delyank@fb.com
|
|
In symmetry with bpf_object__open_skeleton(),
bpf_object__open_subskeleton() performs the actual walking and linking
of maps, progs, and globals described by bpf_*_skeleton objects.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/6942a46fbe20e7ebf970affcca307ba616985b15.1647473511.git.delyank@fb.com
|
|
For internal and user maps, look up the key and value btf
types on open() and not load(), so that `bpf_map_btf_value_type_id`
is usable in `bpftool gen`.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/78dbe4e457b4a05e098fc6c8f50014b680c86e4e.1647473511.git.delyank@fb.com
|
|
Currently, libbpf considers a single routine in .text to be a program. This
is particularly confusing when it comes to library objects - a single routine
meant to be used as an extern will instead be considered a bpf_program.
This patch hides this compatibility behavior behind the pre-existing
SEC_NAME strict mode flag.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/018de8d0d67c04bf436055270d35d394ba393505.1647473511.git.delyank@fb.com
|
|
Adding bpf_cookie test for programs attached by
bpf_program__attach_kprobe_multi_opts API.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-14-jolsa@kernel.org
|
|
Adding tests for bpf_program__attach_kprobe_multi_opts function,
that test attach with pattern, symbols and addrs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-13-jolsa@kernel.org
|
|
Adding bpf_cookie test for programs attached by kprobe_multi links.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-12-jolsa@kernel.org
|
|
Adding kprobe_multi attach test that uses new fprobe interface to
attach kprobe program to multiple functions.
The test is attaching programs to bpf_fentry_test* functions and
uses single trampoline program bpf_prog_test_run to trigger
bpf_fentry_test* functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-11-jolsa@kernel.org
|
|
Adding bpf_program__attach_kprobe_multi_opts function for attaching
kprobe program to multiple functions.
struct bpf_link *
bpf_program__attach_kprobe_multi_opts(const struct bpf_program *prog,
const char *pattern,
const struct bpf_kprobe_multi_opts *opts);
User can specify functions to attach with 'pattern' argument that
allows wildcards (*?' supported) or provide symbols or addresses
directly through opts argument. These 3 options are mutually
exclusive.
When using symbols or addresses, user can also provide cookie value
for each symbol/address that can be retrieved later in bpf program
with bpf_get_attach_cookie helper.
struct bpf_kprobe_multi_opts {
size_t sz;
const char **syms;
const unsigned long *addrs;
const __u64 *cookies;
size_t cnt;
bool retprobe;
size_t :0;
};
Symbols, addresses and cookies are provided through opts object
(syms/addrs/cookies) as array pointers with specified count (cnt).
Each cookie value is paired with provided function address or symbol
with the same array index.
The program can be also attached as return probe if 'retprobe' is set.
For quick usage with NULL opts argument, like:
bpf_program__attach_kprobe_multi_opts(prog, "ksys_*", NULL)
the 'prog' will be attached as kprobe to 'ksys_*' functions.
Also adding new program sections for automatic attachment:
kprobe.multi/<symbol_pattern>
kretprobe.multi/<symbol_pattern>
The symbol_pattern is used as 'pattern' argument in
bpf_program__attach_kprobe_multi_opts function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-10-jolsa@kernel.org
|
|
Adding new kprobe_multi struct to bpf_link_create_opts object
to pass multiple kprobe data to link_create attr uapi.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-9-jolsa@kernel.org
|
